Catalog

Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE — Ideal one-for-one replacement of conventional HID and fluorescent high bay Type
systems. Applications include warehousing, manufacturing, gymnasiums, and other large indoor spaces
with mounting heights up to 60'. Certain airborne contaminants can diminish the integrity of
acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for
suitable uses. LED High Bay
CONSTRUCTION — Structural elements such as the channel and end caps are fabricated from
steel for maximum rigidity. Wireguard attachment points provided. For high ambient (HA) option,
lightweight aluminum heat sink designed to perform in ambient temperatures up to 55 ° C for
maximum naturally convective cooling.
OPTICS — General, narrow, wide and focus distributions available to meet both horizontal and
vertical light level requirements. Injection molded refractors for repeatable photometry. Diffuse lens
IBG
standard to provide glare control and LED protection.
ELECTRICAL — L88 at 60,000 hours, L70>100,000 hours. Utilizes a 90°C case temperature driver for
maximum life at high temperatures. 0.90 power factor and 3kA/6kV level of surge protection is standard.
Optional 5kA/10kV surge protection available. Available as 120-277V or 347-480V input.
0-10V dimming standard for a dimming range of 100% to 10%.
WIRELESS NETWORKING — XPoint™ Wireless technology creates a mesh network to ensure
communication between fixtures, sensors and wall stations facility-wide. This option provides superior
lighting management capabilities including granular control, configuration and custom grouping for
increased energy savings.
INSTALLATION — Suitable for suspension by chain, cable, surface-mounting bracket (THUN accessory),
hook monopoint or single (pendant) monopoint. Surface mounting not recommended without optional
surface mounting bracket. To maintain ambient listing, fixture should be mounted at a minimum plenum
height of 18".
LISTINGS — CSA certified to US and Canadian safety standards. Damp location listed. Suitable for
ambient temperatures from -40°F (-40°C) to 113°F (45°C) when suspended 18" from ceiling. High
ambient option available (HA), suitable for ambient temperatures -40°F (-40°C) to131°F (55°C) when
suspended 18" from ceiling. IP5X rated. The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Acuity Brands is under license. Other
trademarks and trade names are those of their respective owners.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of
this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List
at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Stock configurations are offered for shorter lead times:

Stock Part DLC QPL DLC

Standard Part Number
Number Product ID Premium?
IBG 12000LM SEF AFL GND MVOLT OZ10 40K 80CRI DWH IBG 12L MVOLT PAMMN2VX √
IBG 15000LM SEF AFL GND MVOLT OZ10 40K 80CRI DWH IBG 15L MVOLT P3G6HADN √
IBG 18000LM SEF AFL GND MVOLT OZ10 40K 80CRI DWH IBG 18L MVOLT P851GVEP √
IBG 24000LM SEF AFL GND MVOLT OZ10 40K 80CRI DWH IBG 24L MVOLT PZBJQY5S √
IBG 12000LM SEF AFL GND HVOLT OZ10 40K 80CRI DWH IBG 12L HVOLT PQ5BU878 √
IBG 15000LM SEF AFL GND HVOLT OZ10 40K 80CRI DWH IBG 15L HVOLT PSWUYJP8 √
Capable Luminaire
IBG 18000LM SEF AFL GND HVOLT OZ10 40K 80CRI DWH IBG 18L HVOLT PRVPPS9D √
This item is an A+ capable luminaire, which has been designed and tested to provide
IBG 24000LM SEF AFL GND HVOLT OZ10 40K 80CRI DWH IBG 24L HVOLT P2UE1ZS4 √
consistent color appearance and out-of-the-box control compatibility with simple
IBG 12000LM SEF AFL GND MVOLT OZ10 50K 80CRI DWH IBG 12L MVOLT 5K P7TZZ4ZV √ commissioning.
IBG 15000LM SEF AFL GND MVOLT OZ10 50K 80CRI DWH IBG 15L MVOLT 5K PMXBGZJS √
• All configurations of this luminaire meet the Acuity Brands’ specification for
IBG 18000LM SEF AFL GND MVOLT OZ10 50K 80CRI DWH IBG 18L MVOLT 5K P85EZXU7 √ chromatic consistency
IBG 24000LM SEF AFL GND MVOLT OZ10 50K 80CRI DWH IBG 24L MVOLT 5K PQ5CSK48 √ • This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless
IBG 12000LM SEF AFL GND HVOLT OZ10 50K 80CRI DWH IBG 12L HVOLT 5K PFRXRQKT √ control networks marked by a shaded background*
IBG 15000LM SEF AFL GND HVOLT OZ10 50K 80CRI DWH IBG 15L HVOLT 5K PV4M2BP5 √ To learn more about A+, visit www.acuitybrands.com/aplus.
IBG 18000LM SEF AFL GND HVOLT OZ10 50K 80CRI DWH IBG 18L HVOLT 5K PA36YXUT √
*See ordering tree for details
IBG 24000LM SEF AFL GND HVOLT OZ10 50K 80CRI DWH IBG 24L HVOLT 5K P5H22E5M √

INDUSTRIAL IBG
Page 1 of 11
IBG  LED High Bay
A+ Capable options indicated
by this color background.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: IBG 24000LM SEF AFL GND MVOLT OZ10 40K 80CRI DWH

Performance Color
Series Nominal lumens package Lens Distribution Voltage Driver temperature
IBG 8000LM 8,000 lumens2 30000LM 30,000 lumens SEF Standard AFL Acrylic, frosted WD Wide MVOLT 120-277V OZ10 0-10V 30K 3000 K
IBGN1 12000LM 12,000 lumens 36000LM 36,000 lumens efficiency ACL Clear acrylic GND General HVOLT 347-480V3 dimming2 35K 3500 K
15000LM 15,000 lumens 48000LM 48,000 lumens HEF Premium PCL Clear polycarbonate ND Narrow 120 120V AZ10 0-10V 40K 4000 K
efficiency dimming,
18000LM 18,000 lumens 60000LM 60,000 lumens PFL Semi-diffuse FD Focus 208 208V aux. 50K 5000 K
24000LM 24,000 lumens polycarbonate 240 240V output6
L/LENS Less lens 277 277V
347 347V4
480 480V4,5

Coloring
rendering index Options Finish
70CRI 70 CRI HA High ambient7 Cord sets: Controls: 21 DNA Natural
80CRI 80 CRI SPD Surge protection CS1W Straight plug, HLN360 Haleon 360° High Mount Occ Sensor, pre-wired; Bluetooth® 20 aluminum
90CRI 90 CRI device8 120V17 DWH Gloss white
HLN360HL Haleon 360° High Mount Occ Sensor w/HL Default, pre-wired;
BPK Fixture backpack9 CS3W Twist-lock, Bluetooth® 20
PS1050 Emergency battery 120V17
HLN360ADC Haleon 360° High Mount Occ Sensor w/ADC Default, pre-wired;
pack 10W, non-CEC CS7W Straight plug, Bluetooth® 20
compliant 10 277V17
HLN360ANL Haleon 360° High Mount Occ Sensor w/ANL Default, pre-wired;
PS10250 Emergency battery CS11W Twist-lock, Bluetooth® 20
pack 10W, non-CEC 277V17
HLNASL Haleon High Mount Aisleway Occ Sensor, pre-wired; Bluetooth® 20
compliant 11 CS25W Twist-lock,
PS10250 T20C Emergency battery 347V17 HLNASLHL Haleon High Mount Aisleway Occ Sensor w/HL Default, pre-
pack, 10W, CEC CS97W Twist-lock, wired; Bluetooth® 20
compliant 11 480V17 HLNASLADC Haleon High Mount Aisleway Occ Sensor w/ADC Default, pre-
PS30250 Emergency battery CS93W 600 SO white wired; Bluetooth® 20
pack, 30W, non-CEC cord, no plug HLNASLANL Haleon High Mount Aisleway Occ Sensor w/ANL Default, pre-
compliant 12 (no voltage wired; Bluetooth® 20
PS30250 T20C Emergency battery required) LAOZU 360° high mount motion sensor, pre-wired 22
pack, 30W, CEC CS93W5CD 600 SO
compliant 12 LAH0SZU 360° high mount motion sensor with dimming, pre-wired 22
5-conductor
BGTD Generator transfer white cord, LAPZU 360° high mount motion sensor with photocell, pre-wired 22
device13 no plug LAM0SZU 360° high mount motion sensor, dimming & switching photocell,
SF Single fuse14 (no voltage pre-wired 22
required)
DF Double fuse15 C6D0SUEM 360° high mount motion sensor, dimming only (photocell
OUTCTR Wiring leads pulled disabled), pre-wired; UL924 listed (not available with battery
through back center of pack or BGTD) 23,24
fixture16 C10D0SUEM 360° low mount motion sensor, dimming only (photocell
OCS RELOC® OnePass® disabled), pre-wired; UL924 listed (not available with battery
selectable cable 6' pack or BGTD) 23,25
installed 17, 18 nPP16D nLight® dimming & switching module 26,27
OCU__ RELOC® OnePass® nPP16DER nLight® dimming & switching module with emergency relay (not
unselectable cable 6' available with battery pack or BGTD) 26,27
installed (must specify
tap position)17 nMSI nLight® high mount aisleway motion sensor, pre-wired 26,28
IMP Integrated modular nMSI360 nLight® 360° high mount motion sensor, pre-wired 26,29
plug 19 nMSID nLight® high mount aisleway motion sensor with dimming,
RRL_ RELOC®-Ready pre-wired 26,30
luminaire. (Not nMSI360D nLight® 360° high mount motion sensor with dimming, pre-
available with Haleon wired 26,31
sensor options) See
page 10 for ordering MSI6XADL DSCXADL XPoint™ Wireless 360° high mount motion sensor with photocell
information XPW XPoint™ Wireless 0-10V relay, external (utilizes XPA CMRB0) 55°C
WGX Standard wire guard, max ambient
installed (not available XAD XPoint™ Wireless 0-10V relay, internal, lower max ambient (not
with Haleon sensor) available with Haleon sensor) 32
XPWEM XPoint™ Wireless 0-10V relay, external (utilizes XPACMRB0EM)
55°C max ambient, meets UL924 (not available with battery pack
or BGTD)
XAD924 XPoint™ Wireless 0-10V relay, internal, lower max ambient,
meets UL924 (not available with battery pack or BGTD) 33

See Accessories and footnotes on next page

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 2 of 11
IBG  LED High Bay

Accessories: Order as separate catalog number.

Mounting: Cord sets and sensors for IMP option: Wire guards (not available with Haleon sensor):
IBAC120 M20 Aircraft cable 10' with hook (one pair) CS1WIMP Straight plug, 120V WGIBG22 Wire guard for IBG 8000LM; gloss white
IBAC240 M20 Aircraft cable 20' with hook (one pair) CS3WIMP Twist-lock, 120V WGIBG24 Wire guard for IBG 12000/15000LM; gloss white
IBHMP Hook monopoint CS7WIMP Straight plug, 277V WGIBG26 Wire guard for IBG 18000/24000/30000LM; gloss
HBBS36 Chain hanger with chain, 36" (one pair) CS11WIMP Twist-lock, 277V white
IBGACVH Aircraft 10' V hanger (one pair) CS25WIMP Twist-lock 347V WGIBG42 Wire guard for all IBGN lumen packages; gloss
IBGPMPHB Pendant monopoint splice box, includes side CS93WIMP 600V SO white cord, no plug white
covers (3/4" hub) for use with OUTCTR option, (no voltage required) WGIBG46 Wire guard for IBG 36000/48000/60000LM; gloss
not available with BPK option CS97WIMP Twist-lock 480V white
HC36 Chain hanger and jack chain (pair) MSIIMPIBG Aisle sensor for use with IMP option WGIBG22DNA Wire guard for IBG 8000LM; natural aluminum
THUN Tong hanger bracket (order 2 per fixture) 33 MSI360IMPIBG 360° sensor for use with IMP option WGIBG24DNA Wire guard for IBG 12000/15000LM; natural
aluminum
WGIBG26DNA Wire guard for IBG 18000/24000/30000LM;
natural aluminum
WGIBG42DNA Wire guard for all IBGN lumen packages; natural
aluminum
WGIBG46DNA Wire guard for IBG 36000/48000/60000LM;
natural aluminum

Notes 16 Not available with BPK option. Requires IBGPMPHB accessory to mount fixture. Not available with Cord Set
1 Available with 18000LM, 24000LM, 30000LM and 36000LM only. options.
2 Not available with Haleon sensor controls options. 17 Must specify voltage.
3 Not available with 8000LM. Not available with BTGD, nPP16D, nPP16DER, PS1050, PS10250, PS30250 or XAD. 18 Cannot be used in dimming applications, must use RRLC12S
4 When ordered with 8000LM or Xpoint controls voltage selected utilizes the fixture back pack. 19 Not available with BPK, nPP16D, nPP16DER, nMSI, nMSI360, PS1050, PS10250, or PS30250.
5 Not available with nPP16D or nPP16DER. 20 If 347V or 480V a stepdown transformer will be utilized and BPK option required. RRL option not available.
6 Only available with Haleon sensor controls options. 21 Must specify voltage. Refer to page 7 for Haleon sensor default settings matrix. Refer to page 9 for additional
LSXR ordering options. Refer to page 10 for additional C6D0SUEM and C10D0SUEM information.
7 55 C when suspended, 45 C when surface mounted. Not available with BGTD, PS1050, PS10250, PS30250,
Haleon or XAD. 22 This sensor configuration is suitable for minimum ambient temperature of 14°F (-10°C). See page 9 for low
temperature option providing -4°F (-20°C) minimum ambient temperature.
8 Standard with HVOLT, 347, or 480V - only specify for MVOLT, 120, 208, 240, or 277V. Standard with Motion sen-
sors/controls, BGTD & Power Sentry battery options. 23 Daylight harvesting functionality not enabled by default. See page 10 for default sequence of operation.
9 Required with PS1050, PS10250, PS30250, BGTD. Required with 8000LM when ordered with 347/480V. 24 Utilizes XPA CMRB6.
Required with Xpoint controls when ordered with 347/480V. Not available with nLight. Not for use with THUN 25 Utilizes XPA CMRB10.
mount (surface). 26 Not available with 208V, 240V, or 480V.
10 Requires BPK option. Available 120-277V only. Available with 8000LM only. For ambient temperatures of 32°F 27 347V and 480V utilize a step down transformer.
to 122°F (0°C to 50°C). Not available with IMP. See spec sheet PS1050 for more information. 28 nMSI options utilizes a nPP16 and nCMB 50 sensor, CAT5e connector cable also included.
11 Requires BPK option. Available 120-277V only. Not available with 8000LM. For ambient temperatures of 50°F 29 nMSI360 options utilizes a nPP16 and nCMB 6 sensor, CAT5e connector cable also included.
to 122°F (10°C to 50°C).Not available with IMP. Only available for factory installation. See spec sheet PS10250
for more information. 30 nMSID options utilizes a nPP16D and nCMB 50 sensor CAT5e connector cable also included.
12 Requires BPK option. 120 or 277V only. Not available with 8000LM. For ambient temperatures of 32°F to 122°F 31 nMSI360D options utilizes a nPP16D and nCMB 6 sensor, CAT5e connector cable also included.
(0°C to 50°C). Not available with IMP. See spec sheet PS30250 for more information. 32 Not available with HVOLT. When ordered with 347V or 480V, BPK option is required. Not available with HA
13 Requires BPK option. 120 or 277V only. Not available with PS1050, PS10250, PS30250 or HA. Not available with option.
347 or 480V when ordered in combination with XAD or XPW. For ambient temperatures up to 104°F (40°C). 33 Maximum ambient temperature of standard fixture mounted with THUN is 95°F (35°C). With HA option 113°F
14 Available on 120, 277, 347V. Not available with MVOLT or HVOLT. (45°C). Not available with MSIIMPIBG or MSI360IMPIBG options.
15 Available on 208, 240, 480V. Not available with MVOLT or HVOLT.

POWER SENTRY EMERGENCY BATTERY PACKS

PS1050: http://www.acuitybrands.com/products/detail/369448/Power-Sentry/PS1050/Reduced-Profile-LED-Emergency-Battery-Pack/-/media/products/Power_Sentry/369448/document/PS1050_pdf.pdf
PS10250: http://www.acuitybrands.com/products/detail/604737/Power-Sentry/PS10250/Emergency-LED-Battery-Backup/-/media/products/Power_Sentry/604737/document/PS10250_pdf.pdf
PS30250: http://www.acuitybrands.com/products/detail/604739/Power-Sentry/PS30250/Emergency-LED-Battery-Backup/-/media/products/Power_Sentry/604739/document/PS30250_pdf.pdf

EMERGENCY LUMENS (5000K 70CRI)

Fixture IBG IBGN
8000LM 12000LM - 18000LM - 18000LM -
Lumen package (PS1050 only) 15000LM 60000LM 36000LM
PS1050/PS10250 1600 1300 1900 1200
PS30250 N/A 4000 2400 3800
Note: For emergency lumen output of specific model, please consult factory.

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 3 of 11
IBG  LED High Bay

DIMENSIONS Weight: (may vary with options or accessories)

8L: 7.75 lbs (3.515Kg)
All dimensions are in inches (centimeters) unless otherwise indicated. 12L/15L: 10.5 lbs (4.762Kg)
Dimensions may vary with options or accessories. 18L/24L/30L: 15.9 lbs (7.212Kg)
18L/24L/30L/36L: 4' Narrow - 16.25 lbs (7.370Kg)
36L/48L/60L: 4' - 6' Mod - 21.75 lbs (9.865Kg)

25.60 25.60
25.60

11.80 25.60 25.60

2.68 15.51 25.60
2.68 20.71
IBG 8000LM 2.68
12.62
16.12
IBG 12000LM 15000LM
2.90 21.42 IBG 18000LM 24000LM 30000LM
2.90
(with wire guard) 2.93
(with wire guard)
(with wire guard)

47.28

11.80 11.80 47.28

47.28
2.68
2.68
IBGN 18000LM IBGN 24000LM 30000LM 36000LM

5.77
BPK OPTION
47.28
5.48

PS30250 OPTION

20.71 47.28

2.68
IBG 36000LM 48000LM 60000LM

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 4 of 11
IBG  LED High Bay
IBG OPERATIONAL DATA

Lumen Efficiency Lens/distribution

package level
Acrylic frosted/ general Clear acrylic/narrow Clear acrylic/wide Clear acrylic/focus
SEF 7594 7145 7384 7364
8000LM
HEF 7842 7378 7625 7604
SEF 11580 10895 11260 11228
12000LM
HEF 11746 11051 11421 11390
SEF 14458 13603 14059 14019
15000LM
HEF 14824 13947 14415 14374
SEF 17329 16303 16850 16803
Delivered 18000LM
lumens HEF 17752 16702 17262 17214
4000K, SEF 23000 21639 22365 22303
80CRI 24000LM
HEF 23612 22215 22960 22896
SEF 27344 25727 26589 26515
30000LM
HEF 29577 27827 28760 28680
SEF 33203 31239 34547 32197
36000LM
HEF 35528 33426 34547 34450
SEF 45973 43253 44704 44579
48000LM
HEF 47254 44458 45949 45821
SEF 55453 52172 53922 53771
60000LM
HEF 57027 53653 55452 55298
SEF 7873 7408 7656 7635
8000LM
HEF 8082 7604 7859 7837
SEF 12006 11296 11674 11642
12000LM
HEF 12106 11390 11771 11739
SEF 14990 14103 14576 14536
15000LM
HEF 15278 14374 14856 14815
SEF 17966 16904 17470 17422
18000LM
HEF 18296 17214 17791 17741
Delivered
lumens SEF 23847 22436 23188 23123
24000LM
5000K, HEF 24366 22896 23664 23598
80CRI
SEF 28351 26674 27568 27491
30000LM
HEF 30483 28680 29641 29559
SEF 34221 32196 35605 33183
36000LM
HEF 36616 34450 35605 35506
SEF 47665 44845 46349 46220
48000LM
HEF 48702 45820 47357 47225
SEF 57494 54093 55906 55751
60000LM
HEF 58774 55297 57151 56992

PHOTOMETRICS
See www.lithonia.com.

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 5 of 11
IBG  LED High Bay
IBG CHARACTERISTICS
Wattage
Length Width Depth
Lumen Standard efficiency High efficiency Comparable
package Light Source
Dimensions are shown in inches (centimeters)
120V 277V 347V 480V 120V 277V 347V 480V unless otherwise noted.
8000LM 55 54 58 61 50 49 51 54 25.6 11.75 2.75 100W MH, 4-lamp T8 NBF
12000LM 79 77 77 76 70 69 68 67 25.6 15.52 2.75 175W MH, 4-lamp T8 HBF, 2-lamp T5HO
15000LM 97 95 97 96 87 86 86 86 25.6 15.52 2.75 200W MH, 6-lamp T8 NBF
18000LM 114 112 114 115 102 100 102 103 25.6 20.65 2.75 250W MH, 6-lamp T8 HBF, 4-lamp T5HO
24000LM 154 150 150 150 136 133 135 135 25.6 20.65 2.75 400W MH, 6-lamp T5HO
30000LM 193 186 188 188 176 171 173 173 25.6 20.65 2.75 575W MH, 10-lamp T8 HBF
36000LM 225 221 227 229 200 197 203 206 47.29 20.65 2.75 750W MH, 8-lamp T5HO
48000LM 301 293 301 302 267 261 269 270 47.29 20.65 2.75 875W MH, 10-lamp T5HO
60000LM 385 374 378 377 332 323 330 330 47.29 20.65 2.75 1000W MH

IBGN OPERATIONAL DATA

Lumen Efficiency Lens/distribution
package level
Acrylic frosted/ general Clear acrylic/narrow Clear acrylic/wide Clear acrylic/focus
SEF 17036 16028 16566 16520
18000LM
Delivered HEF 17776 16724 17285 17237
lumens SEF 22727 21383 22100 22038
4000K, 24000LM
80CRI HEF 24123 22696 23457 23392
SEF 28642 26948 27851 27773
30000LM
HEF 29493 27748 28679 28599
SEF 34336 32305 33388 33295
36000LM
HEF 34912 32846 33948 33853
SEF 17663 16618 17175 17128
18000LM
HEF 18320 17237 17814 17765
SEF 23564 22170 22913 22849
Delivered 24000LM
lumens HEF 24862 23391 24176 24108
5000K, SEF 29696 27940 28876 28796
80CRI 30000LM
HEF 30397 28599 29558 29475
SEF 35600 33494 34617 34520
36000LM
HEF 35982 33853 34988 34890

IBGN CHARACTERISTICS
Wattage
Length Width Depth
Lumen Standard efficiency High efficiency
package
Dimensions are shown in inches (centimeters)
120V 277V 347V 480V 120V 277V 347V 480V unless otherwise noted.
18000LM 117 114 115 114 104 102 101 101 47.29 11.75 2.75
24000LM 172 170 167 167 152 150 153 153 47.29 11.75 2.75
30000LM 209 205 208 207 183 180 179 178 47.29 11.75 2.75
36000LM 246 240 242 243 207 203 202 201 47.29 11.75 2.75

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 6 of 11
IBG  LED High Bay
PROJECTED LUMEN MAINTENANCE
IBG 2ft & 4ft LUMENS VS. AMBIENT TEMPERATURE
Operating hours 0 15,000 30,000 45,000 60,000 100,000
Ambient °C Ambient °F Lumen Multiplier
Lumen maintenance factor 1 0.97 0.95 0.93 0.91 0.86
0 32 1.04

IBGN 5 41 1.03
Operating hours 0 15,000 30,000 45,000 60,000 100,000 10 50 1.02
Lumen maintenance factor 1 0.97 0.93 0.90 0.87 0.81 20 68 1.01
25 77 1.00
30 86 0.99
AMBIENT TEMPERATURE RATINGS 35 95 0.99
Mounting Suspended Surface 40 104 0.98
Standard temperature rating 113°F (45°C) 95°F (35°C) 45 113 0.97
HA option temperature rating 131°F (55°C) 113°F (45°C) 50 122 0.96
55 131 0.96

HALEON - Integrated Occupancy Sensor with Bluetooth® Programmability

• Programmable sensor settings over Bluetooth® with Acuity VLP smartphone app.
• Default programming options to service various application spaces - occupancy detection, 0-10V dimming and daylight harvesting.
• 360° High Mount and High Mount Aiselway lens detection options for mounting heights up to 40 ft.
• Integrated retractable lens mask included to block unwanted detection.
• Sensor ambient temperature rating of -40°F (-40°C) to 158°F (70°C).

Haleon Default Programming

Occupancy Time Photocell Dim to Off
Model Default Operation LSXR Equivalent Photocell Mode Low Trim High Trim
Delay Set-point Time Delay

HLNxxx On/Off Occupancy Only LSXR 6 LT or LAO0STU 10 minutes Disabled n/a n/a 100% Disabled

Occupancy w/ 0-10V Dim- LSXR 6 HL LT or

HLNxxxHL 10 minutes Disabled n/a 10% 100% 2.5 minutes
ming (High/Low/Off) LAH0STU

Occupancy w/ Dim & Switch LSXR 6 ADC LT or

HLNxxxADC 10 minutes On/Off & Auto Dim 4 fc 10% 100% 0 seconds
Photocell LAM0STU

Dim & Switch Photocell LSXR 6 ANL LT or Stay Dim/

HLNxxxANL with High/Low Occupancy 10 minutes On/Off & Auto Dim 4 fc 10% 100%
LAG0STU Never Off
Operation

Note: Lens detection noted in place of 'xxx'

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 7 of 11
IBG  LED High Bay
HALEON COVERAGE PATTERNS HIGH MOUNT

HIGH MOUNT 360° SIDE VIEW TOP VIEW

40 12
• Optimized full coverage pattern for 10 – 40 ft. (3.1 – 12 m)
• Reliable detection of large motion (e.g. pedestrian walking traffic) up to 30 0 ft 0m
ft. (9.1 m) mounting height
10 3.0 20 6.1
• Reliable detection of extra-large motion (e.g. forklift traffic) up to 40 ft. (12
m) mounting height 20 6.1

• Stow-able rotating lens shield can be utilized to mask areas in which 0 ft 0m

detection is not desired 30 9.1

40 12

12 6.1 0m 6.1 12
20 6.1
40 20 0 ft 20 40

40 12

HIGH MOUNT AISLEWAY

• Optimized bi directional coverage pattern for aisleways with 10 – 40 ft. (3.1 – 12 m)
mounting heights
• 1.2X’s mounting height equals approximate detection range
• Reliable detection of large motion (e.g. pedestrian walking traffic) up to 30 ft. (9.1 m)
mounting height
• Reliable detection of extra-large motion (e.g. forklift traffic) up to 40 ft. (12 m) mounting
height
• Stow-able rotating lens shield can be utilized to mask areas in which detection is not
desired

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 8 of 11
IBG  LED High Bay
LSXR – Fixture Mount Occupancy Sensor (see LSXR Comparable Old style sensor
www.AcuityControls.com for additional information) configuration CMRB sensor nomenclature
• Three interchangeable lens options to satisfy multiple For shortest lead times use one of the following LSXR configurations
mounting heights and coverage pattern requirements.
LCOZU CMRB 50 MSI
• Integrated mounting bracket drops lens down 3” from chase
nipple. LCH0SZU CMRB 50 D MSID
• Single or dual relay versions — designed with robust LCPZU CMRB 50 P MSIPED
protection from the harsh switching requirements of T5 and
LED loads. LAOZU CMRB 6 MSI360
• Photocell and 0-10VDC dimming options. LAH0SZU CMRB 6 D MSI360D
• No PIR field calibration or sensitivity adjustments required. LAPZU CMRB 6 P MSI360PED
• Sensor ambient temperature rating of 14°F (-10°C) to 131°F
(55°C).

SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.
SINGLE RELAY
ORDERING INFORMATION Example: LAH0SZU

Default occupancy
Series Lens option Dimming/Photocell Max. dim level Min. dim level Temp/Humidity time delay

L LSXR passive A High mount, O None1 0 10 VDC S Minimum dim Z None I 30 sec
infrared indoor 360° H High/low occupancy 9 9 VDC level of ballast T Low temperature2 D 2.5 min
occupancy sensor B Low mount, operation 1 1 VDC
8 8 VDC X 5.0 min
360° P Switching photocell 2 2 VDC
7 7 VDC R 7.5 min
C High mount (on/off)1 3 3 VDC
aisleway U 10.0 min
M Dimming and 4 4 VDC (with minimum 15
switching photocell minute on time)
5 5 VDC
G Dimming and V 15.0 min
switching photocell 6 6 VDC
with high/low oc- W 20.0 min
cupancy operation Y 30.0 min

Notes
1 Max and min dim levels not applicable with this option.
2 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

DUAL RELAY (Available with 120, 277, and 347V only)

ORDERING INFORMATION Example: LA2KZU

Series Lens option Poles Operating mode Temp/Humidity Default occupancy time delay
L LSXR passive infrared A High mount, 360° 2 Dual relay J None Z None I 30 sec
indoor occupancy sensor B Low mount, 360° K Alternating off relays (promotes even lamp wear) T Low temperature1 D 2.5 min
C High mount aisleway O Alternating off relays w/photocell X 5.0 min
P Switching photocell(on/off) R 7.5 min
E Photocell on/off (pole 1 only) U 10.0 min (with minimum
F Photocell on/off - both poles (dual set-point) 15 minute on time)
V 15.0 min
W 20.0 min
Y 30.0 min

Example: LENS 50 J100 Notes

1 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

Replacement lenses: Order as separate catalog number.

Series Lens type Package quantity
LENS 6 High mount 360° [blank] Single Lens
10 Low mount 360° J10 10-pack
50 High mount aisleway J100 100-pack

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 9 of 11
IBG  LED High Bay
LSXR COVERAGE PATTERNS 0m 0 ft

HIGH MOUNT 360º LENS (#6)

• Best choice for 15 to 45 ft (4.57 to 13.72 m) 4.6 15
mounting heights
• 15 to 20 ft (4.57 to 6.10 m) radial coverage
overlaps area lit by a typical high bay fixture LOW VIEW HIGH VIEW
9.1 30
• Excellent detection of large motion (e.g. walking) 0 ft 0m
up to a 35 ft (10.76 m) mounting height
• Excellent detection of extra large motion (e.g.
15 4.6 13.7 45
forklifts) up to a 45 ft (13.72 m) mounting height
6 3 0m 3 6 9.1 6 3 0m 3 6 9.1
20 10 0 ft 10 20 30 20 10 0 ft 10 20 30

HIGH MOUNT AISLEWAY LENS (#50)

• Provides a bi-directional coverage pattern ideal SIDE VIEW TOP VIEW
0 ft 0 m
for warehouse racking
10 3
• 1.2x mounting height equals approximate
detection range in either direction 20 6 7 2.1
• Typical 40 ft (12.19 m) mounting detects 50 ft 30 9.1 0 ft 0 m
(15.24 m) in either direction
40 12.2 7 2.1
• Superior aisleway coverage compared to a 15.2 7.6 0m 7.6 15.2 15.2 7.6 0m 7.6 15.2
masked 360º lens 50 25 0 ft 25 50 50 25 0 ft 25 50

LOW MOUNT 360º LENS (#10)

• Best choice for large motion detection (e.g. walking) 8.5 28
• 360º conical shaped pattern
• Provides ~24 ft (7.32 m) radial coverage (~2000 ft2) SIDE VIEW TOP VIEW 4.3 14
0 ft 0m
when mounted at 9 ft (2.74 m)
• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 0m 0 ft

16 to 36 ft (4.88 to 10.97 m) radial coverage

9 2.7
4.3 14
• Detection range improves when walking across 8.5 6.4 4.3 2.1 0m 2.1 4.3 6.4 8.5
beams compared to into beams
28 21 14 7 0 ft 7 14 21 28 8.5 28

C6D0SUEM & C10D0SUEM - UL924 Listed Sensors

SENSOR DEFAULT SEQUENCE OF OPERATION
• The occupied light level is full output.
• The unoccupied light level is approximately 30%.
• The time delay following sensor vacancy is 5 minutes, with an additional 5 minute slow ramp from the occupied light level to the unoccupied light level.
• The onboard daylight sensor is not enabled by default - sensor will not respond to changing daylight conditions.
Daylight sensor settings can be enabled and programmed by a trained technician after installation.

EGRESS MODE SEQUENCE OF OPERATION

The UL924 C6D0SUEM & C10D0SUEM controls are designed to provide fully tuned light output for 90 minutes following power loss or interruption, ignoring automatic dimming/occupancy/daylight control
signals during this time.
• Typical sequence upon power loss: Backup power source activates, transfer switch moves the emergency circuit powering the sensor onto the backup source, and sensor regains power. This sensor is
programmed to detect any power interruption or transfer > 30 ms
• The sensor then ignores occupancy & daylight status and controls the luminaire to full light output for 90 minutes.
• The device resumes normal dimming & occupancy controls after 90 minutes.
• This sensor should not be used with online power backup systems or any transfer devices with < 30 ms transfer time.

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 10 of 11
IBG  LED High Bay
IMP - Integrated Modular Plug
• The integrated modular plug (IMP) option allows the installer to plug and play a multitude of accessories.
• Cord sets connect quickly to any fixture with IMP option.
• IMP accessories include occupancy sensors, photocells, X-point relays.

IMP compatible cord sets1 IMP compatible sensors

CS1WIMP Straight plug, 120V MSIIMP Aisle sensor
CS3WIMP Twist-lock, 120V MSI360IMP 360° sensor
CS7WIMP Straight plug, 277V
CS11WIMP Twist-lock, 277V
CS25WIMP Twist-lock, 347V
CS93WIMP 600V SEOOW white cord, no plug
Notes
CS97WIMP Twist-lock, 480V
1 Cord set required for fixture operation. All cord sets are 18/3, 6’ white.

RRL - RELOC®-Ready Luminaire

• RRL connectors can be used with Quick-Flex®, System 820 and OnePass® systems.
• Load side of connector factory installed to luminaire.
• 4-pole mating connector with push-in terminations allows for simple installation.
• Touch-safe design on both halves meets UL/CSA requirement.
• Wiping contact design allows safe disconnect under load.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RRLA

Series Wiring instructions

RRL RELOC®-ready luminaire A Hot conductor wired to position #1 (phase A); non-dimming AE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to position #2
(phase B); non-dimming 2
B Hot conductor wired to position #2 (phase B); non-dimming ABE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to position #2
(phase B), inverter conductor wired to position #3 (phase C); non-dimming 1,2
C Hot conductor wired to position #3 (phase C); non-dimming 1 C12S Hot conductor in position #1 (phase A), low voltage conductor #1 in position #2,low
voltage conductor #2 in position #3; dimming 1,3
AB Outboard hot conductor wired to position #1 (phase A), inboard hot
conductor wired to position #2 (phase B); non-dimming

Compatible RELOC® Cables for Industrial Luminaires (ordered and shipped separately)
(click to view RELOC product page for more information)

OCS OCU OD

Notes
1 C, ABE, and C12S options are not used with Quick-Flex QFC,
QSFC, QPT, and QD.
2 AE and ABE commercial fixtures should disconnect the TSPL be-
fore unplugging the RRL so it does not go into discharge mode.
3 C12S option is used with the OnePass OD and 820 SSC, PT, and
DC for 0-10V/DALI applications.
DC PT

IBG

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 800-315-4963  www.lithonia.com © 2016-2018 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 03/01/18
Page 11 of 11