Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 101 views

    Lizards - Flow Switch

    Uploaded by

    Kiệt Trần
    The document discusses two types of flow switches - the LFS series for liquid lines and the AFS series for air ducts. Both are single-pole, double-throw switches that can energize or de-energize a device based on fluid/air flow levels. The LFS is used on water and glycol lines, while the AFS detects air flow/absence of flow in ducts using a stainless steel paddle. Both provide on/off control and have IP54 protection, 2-year warranty, and CE/ISO9001 certification.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lizards - Flow Switch

    Uploaded by

    Kiệt Trần
    101 views1 page
    The document discusses two types of flow switches - the LFS series for liquid lines and the AFS series for air ducts. Both are single-pole, double-throw switches that can energize or de-energize a device based on fluid/air flow levels. The LFS is used on water and glycol lines, while the AFS detects air flow/absence of flow in ducts using a stainless steel paddle. Both provide on/off control and have IP54 protection, 2-year warranty, and CE/ISO9001 certification.

    Original Title

    LIZARDS -FLOW SWITCH

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses two types of flow switches - the LFS series for liquid lines and the AFS series for air ducts. Both are single-pole, double-throw switches that can energize or de-energize a device based on fluid/air flow levels. The LFS is used on water and glycol lines, while the AFS detects air flow/absence of flow in ducts using a stainless steel paddle. Both provide on/off control and have IP54 protection, 2-year warranty, and CE/ISO9001 certification.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    101 views1 page

    Lizards - Flow Switch

    Uploaded by

    Kiệt Trần
    The document discusses two types of flow switches - the LFS series for liquid lines and the AFS series for air ducts. Both are single-pole, double-throw switches that can energize or de-energize a device based on fluid/air flow levels. The LFS is used on water and glycol lines, while the AFS detects air flow/absence of flow in ducts using a stainless steel paddle. Both provide on/off control and have IP54 protection, 2-year warranty, and CE/ISO9001 certification.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    FS Flow Switch

    Features

    The LFS series Flow switches are Single-Pole, Double-Throw (SPDT) flow switches used on fluid lines carrying water, ethylene glycol,
    or other fluids not classified as hazardous. They can be wired to energize one device and de-energize another device powered from the
    same source when fluid flow either exceeds or drops below the set flow rate.

    The AFS series Flow switches are Single- Pole, Double-Throw (SPDT) flow switches used on air. This controls detects also air flow or
    the absence of air flow in ducts, responding only to the velocity of air movement. The one-piece stainless steel paddle can be trimmed,
    if necessary. The control is supplied with mounting plate gasket. The range adjusting screw permits field adjustment of flow rate setting.

    Usage Area : Air and Liquid


    Liquid Temp. Range : 5 ~ 80°C
    Max. Working Pres. : 1.6 MPa
    Ambient Tmp. Range : 5°C ~ 100°C
    Load Current : 15A / 230V AC
    Output Signal : 2 or 3 point On/Off control
    Contact Arrange : One contact, SPDT
    Flow Paddle Lengths : 33, 58, 84, 102 and 127mm
    Protection : IP54
    Installation : Female threaded
    Warranty : 2 years
    Certificates : CE and ISO9001
    :

    Pipe Size Range (lt/mn) D Band (lt/mn) Paddle

    DN25 1” 16 ~ 32 6 1

    DN32 1 1/4” 22 ~ 50 8 1

    DN40 1 1/2” 28 ~ 72 9 1

    DN50 2” 50 ~ 110 15 2

    DN65 2 1/2” 65 ~ 130 20 2

    DN80 3” 100 ~ 200 30 3

    Usage Flow Paddle Load


    Part Number Thread Dimension
    Area Lengths Current

    LFS-15 DN15 1/2”

    LFS-20 Water DN20 3/4”


    15A
    33, 58, and 84mm
    230V AC
    LFS-25 DN25 1”

    AFS-20 Air DN20 3/4”

    19

    You might also like