GeM Bidding 3556081

Bid Number: GEM/2022/B/2320180
Dated: 07-07-2022
Bid Document
Bid Details
Bid End Date/Time 18-07-2022 19:00:00
Bid Opening Date/Time 18-07-2022 19:30:00
Bid Offer Validity (From End Date) 75 (Days)
Ministry/State Name Maharashtra
Department Name Industries Department Maharashtra
Maharashtra State Electricity Transmission Corporation

Organisation Name
Limited
Office Name Central Purchase Agency Corporate Office Mumbai
Total Quantity 375
Fixed Clean Agent Gas based cylinderless Fire Suppression

Item Category
System (Q2)
Minimum Average Annual Turnover of the

66 Lakh (s)
bidder (For 3 Years)
OEM Average Turnover (Last 3 Years) 66 Lakh (s)
Years of Past Experience Required for

3 Year (s)
same/similar service
MSE Exemption for Years Of Experience

Yes
and Turnover
Startup Exemption for Years of Experience

No
and Turnover
Experience Criteria,Past Performance,Bidder

Turnover,Certificate (Requested in ATC),OEM Authorization
Certificate,OEM Annual Turnover,Additional Doc 1
(Requested in ATC),Additional Doc 2 (Requested in
ATC),Additional Doc 3 (Requested in ATC),Additional Doc 4
Document required from seller
(Requested in ATC)
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer
Past Performance 10 %
Bid to RA enabled No
Fixed Clean Agent Gas based cylinderless Fire Suppression

Primary product category
System
Time allowed for Technical Clarifications

3 Days
during technical evaluation
Is Part Quantity Bidding Allowed? Yes
Estimated Bid Value 13345377.08
1 / 19
Bid Details
Evaluation Method Item wise evaluation
EMD Detail
Advisory Bank HDFC Bank
EMD Percentage(%) 1.00
ePBG Detail
Advisory Bank HDFC Bank
ePBG Percentage(%) 10.00
Duration of ePBG required (Months). 26
(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy.
(b). The EMD % will be applicable for each schedule/group selected during Bid creation.
(c). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.
Beneficiary:
Executive Engineer
Central Purchase Agency, MSETCL, C.O. Mumbai, Prakashgad, 1st Floor, Plot no. G-9, Anant Kanekar Marg,
Bandra (East), Mumbai - 51.
(Mangesh Padmaker Hote)
Splitting
Splitting Applied Yes
Maximum No. Of Bidders Amongst Which Order

3
May Be Split
MII Purchase Preference
MII Purchase Preference No
MSE Purchase Preference
MSE Purchase Preference Yes
1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria". If the bidder is OEM of the
offered products, it would also be exempted from the "OEM Average Turnover" criteria. In case any bidder is
seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility for
2 / 19
exemption must be uploaded for evaluation by the buyer.
2. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
3. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
4. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
5. Purchase preference to Micro and Small Enterprises (MSEs) from the State of Bid Inviting Authority : Purchase
preference will be given to MSEs as Micro and Small Enterprises from the State of Bid inviting Authority. If the
bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered product in
case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for Micro and
Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered Service.
Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered
product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 10% of margin of
purchase preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 50 % of total quantity as defined/ decided in relevant policy.
Part Quantity Bidding

Buyer has allowed part quantity bidding, bidders can offer maximum quantity that they can deliver keeping in
mind their capacity and delivery period requirements. The offer quantity has to be more than minimum bid
quantity as specified by the Buyer in the bid. Offers with quantity less than Minimum are liable to be rejected. It
may however be noted that there is no guarantee that full offer quantity will be ordered by the buyer. Quantity
to be ordered by the buyer will depend on various factors including the Ranking of the bidder, Offered quantity,
Splitting criteria indicated by the buyer in the bid and the requirement of the buyer to have multiple sources of
supply for ensuring supply chain etc. Sellers would be notified about likely order quantity or range of possible
order quantity at the time of price match request made by the buyer. ward of contract will be subject to
acceptance of price match request along with min / max offer quantity as decided by the Buyer.
6. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
7. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 10% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.
Evaluation Method ( Item Wise Evaluation Method )
Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule.
The details of item-consignee combination covered under each schedule are as under:
3 / 19
Evaluation Estimated Quantit
Item/Category
Schedules Value y
Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Schedule 1 1263185.28 56
System

Schedule 2 2224337.76 81
System

Schedule 3 780584.16 24
System

Schedule 4 4947404.88 132
System

Schedule 5 3075865 65
System

Schedule 6 1054000 17
System
Itemwise Minimum Capacity Required From Seller
Schedule Item Minimum

Item Category
Name Quantity Capacity
Fixed Clean Agent Gas based cylinderless Fire

Schedule 1 56 6
Suppression System

Schedule 2 81 8
Suppression System

Schedule 3 24 3
Suppression System

Schedule 4 132 14
Suppression System

Schedule 5 65 7
Suppression System

Schedule 6 17 2
Suppression System
Fixed Clean Agent Gas Based Cylinderless Fire Suppression System ( 56 pieces )
Brand Type Registered Brand
Technical Specifications
* As per GeM Category Specification
Specification Specification Name Bid Requirement (Allowed Values)
4 / 19
GENERIC System Operation The heat-sensitive polymer/Plastic tubing stores

extinguishing clean agent agent in the tube itself
eliminating the need for external cylinder .It should
also have a inbuilt pressure gauge (maintaining low
pressure) which shows the pressure in the tube. In
case of fire, when temperature inside panel/engine
compartment reaches between 80-120ºC, the heat-
sensitive tubing bursts at the point it is in contact with
the flame to form a miniature nozzle. The
extinguishing agent is sprayed out of the tube through
the miniature nozzle, flooding the localized area and
instantly extinguishing the flame.
CYLINDER-LESS AUTOMATIC Designed to fight fires that occur in the enclosed

FIRE DETECTION & space of electric panels/closed cabinets/Racks
SUPPRESSION SYSTEM or /Vehicle Engine Compartments. The system's split
Fixed Clean Agent Gas second detection and activation ensures that the fires
based Fire Suppression are killed in the nascent stage inside the most
System vulnerable spaces .
Suitability of system Suitable for Totally closed as well as ventilated

electric panels/ cabinets/Racks
Volume of protected 0.20-0.30 m³

enclosed Area for which
Cylinderless Tubing System
is required (cubic meter)
Type of Clean agent with zero HFC227ea For electric panels/ cabinets/Racks
ODP(ozone depleting potential)
as per NFPA 2001 to be used
for fire suppression
Clean Agent listing UL
CONSTRUCTIONAL Clean agent Capacity in 0.25

each Tube
Length of Heat Sensing 1.1

Tube (HST) made of special
modified polyamide (PA) in
(meter) approved by ILAC/
NABL / UL LISTED
PERFORMANCE Minimum and maximum minimum -40°C, maximum + 80°C

operation temperature
CERTIFICATION Warranty of the complete 1, 2, 3

system
Additional Specification Parameters - Fixed Clean Agent Gas Based Cylinderless Fire Suppression
System ( 56 pieces )
5 / 19
Specification Parameter
Bid Requirement (Allowed Values)
Name
Warranty of Complete System 24 Months

* Bidders offering must also comply with the additional specification parameters mentioned above.
Consignees/Reporting Officer and Quantity
Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer
415105,Major Stores, Karad

Jagdish Shankar
1 (Ogalewadi) PO-Ogalewadi, 4 120
Sudke
Dist- Satara.
410206,Office of the Executive

Engineer MSETCL, Major Stores
Varsha Deepak
2 Panvel, Near TATA Colony, old 52 120
Mankar
Mumbai- Pune road, Bhingari,
Panvel - 410206




6 / 19

each Tube

NABL / UL LISTED


system
Name

Consignee/Reporti
ng Officer
442001,Major Store Wardha

Dnyaneshwar Near 220kv S/s Wardha
1 14 120
Mahadeo Khaire Hinghanghat Road, Wardha
Maharashtra

Jagdish Shankar
Sudke
Dist- Satara.
431002,Old power house

Kantilal Dnyanoba campus, Dr.Ambedkar Road,
3 1 120
Munde Mill Corner,Aurangabad
Pincode:- 431002
7 / 19
Consignee/Reporti
ng Officer

Varsha Deepak
Mankar
Panvel - 410206





each Tube

NABL / UL LISTED
8 / 19


system
Name

Consignee/Reporti
ng Officer
424001,Major stores Dhule ,

Kishore Devidas M.S.E.T.C.L. 132 kv s/s
1 1 120
Dandge Premises, MSEB Colony,
Malegaon Road, Dhule

2 4 120
Maharashtra

Jagdish Shankar
Sudke
Dist- Satara.

4 1 120
Pincode:- 431002

Varsha Deepak
Mankar
Panvel - 410206
9 / 19





each Tube

NABL / UL LISTED


system
10 / 19
Name

Consignee/Reporti
ng Officer
444701,OFFICE OF EXECUTIVE
ENGINEER MAJOR STORE "A"
Nitin Arunpant
1 BADNERA OPPOSITE OF 220 KV 5 120
Karde
BADNERA S/S KONDESHWAR
ROAD, BADNERA
413133,PLOT No. F-14, MIDC

Swati Mahesh
2 Near Railway Gate Katphal 11 120
Kulkarni
Road Baramati

3 22 120

4 29 120
Maharashtra

Jagdish Shankar
Sudke
Dist- Satara.

6 32 120
Pincode:- 431002

Varsha Deepak
Mankar
Panvel - 410206
11 / 19





each Tube

NABL / UL LISTED


system
12 / 19
Name

Consignee/Reporti
ng Officer

Swati Mahesh
Kulkarni
Road Baramati

2 11 120

3 12 120
Maharashtra

Jagdish Shankar
Sudke
Dist- Satara.

5 15 120
Pincode:- 431002

Varsha Deepak
Mankar
Panvel - 410206
13 / 19



Volume of protected 2.12 – 3.45 m³


each Tube

NABL / UL LISTED


system
14 / 19
Name

Consignee/Reporti
ng Officer

Swati Mahesh
Kulkarni
Road Baramati

2 1 120

3 1 120
Maharashtra

Varsha Deepak
Mankar
Panvel - 410206
Buyer Added Bid Specific Terms and Conditions

1. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
2. Generic
Bidders shall quote only those products in the bid which are not obsolete in the market and has at least 5
years residual market life i.e. the offered product shall not be declared end-of-life by the OEM before this
period.
3. Generic
Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.
4. Generic
Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.
15 / 19
5. Generic
Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers
can match and verify the Data Sheet with the product specifications offered. In case of any unexplained
mismatch of technical parameters, the bid is liable for rejection.
6. Generic
Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU / Public Listed Company for 3 years before the bid opening date. Copies of relevant contracts to be
submitted along with bid in support of having supplied some quantity during each of the year. In case of
bunch bids, the primary product having highest value should meet this criterion.
7. Generic
Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope
of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.
8. Generic
Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.
9. Generic
Shelf Life: The Product to be supplied must have minimum 5 Shelf Life. On the date of supply, minimum
5 usable shelf life should be available / balance.
10. Generic
1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of
buyer.
2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior
written consent of buyer.
3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally
liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due
performance of the Contract and the Sellers obligations there under.
11. Generic
Upload Manufacturer authorization: Wherever Authorised Distributors are submitting the bid,
Manufacturers Authorisation Form (MAF)/Certificate with OEM details such as name, designation, address,
e-mail Id and Phone No. required to be furnished along with the bid.
12. Generic
Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy
available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller,
if:
i) The Seller fails to comply with any material term of the Contract.
ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the
stipulated Delivery Period or such inability otherwise becomes apparent.
iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period
and/or to replace/rectify any rejected or defective Material(s) promptly.
iv) The Seller becomes bankrupt or goes into liquidation.
v) The Seller makes a general assignment for the benefit of creditors.
vi) A receiver is appointed for any substantial property owned by the Seller.
vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the
Purchase Order on the Seller.
13. Generic
While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
16 / 19
screenshot of GST portal confirming payment of GST.
14. OEM
IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should
be submitted.
15. Inspection
Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following
Inspection Agency would be conducting inspection of stores before acceptance:
Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been
selected in ATC): Buyer's Respresentative/ Appointed Agency
Post Receipt Inspection at consignee site before acceptance of stores: By Consignee
16. Scope of Supply
Scope of supply (Bid price to include all cost components) : Supply Installation Testing and
Commissioning of Goods
17. Certificates
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.
18. Certificates
The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test
certificate, approval certificates and other certificates as prescribed in the Product Specification given in
the bid document.
19. Certificates
To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the
date of bid opening (to be uploaded with bid): 1) Type Test Report 2) Certificate of Accredition of Lab
where Type Tests are conducted 3) OEM Compliance Report for cyclinder less automatic fire suppression
as per National Fire Prevention Association (NFPA) 2001 for Clause 1.5.1.2/4.1.1.1/5.4.2.(3-
5)/5.5.1/5.5.3.3/5.7.1.1.1.
20. Buyer Added Bid Specific ATC
Buyer Added text based ATC clauses
1) The bidder to carry out demonstration of the offered equipment on date and place intimated by MSETCL
within 1 month from date of award of order.
2)The Bidders shall note that simultaneous offers from the manufacturers and their authorized agents
/agent are not permissible and if submitted, both the offers shall be rejected.
21. Turnover
Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.
17 / 19
22. Turnover
OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.
23. Service & Support
Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each
Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site
warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have
to establish one within 30 days of award of contract. Payment shall be released only after submission of
documentary evidence of having Functional Service Centre.
24. Warranty
Warranty period of the supplied products shall be 2 years from the date of final acceptance of goods or
after completion of installation, commissioning & testing of goods (if included in the scope of supply), at
consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of
delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during
the guarantee period. Seller should have well established Installation, Commissioning, Training,
Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of
Service Centres near consignee destinations are to be uploaded along with the bid.
25. Warranty
Successful bidder will have to ensure that adequate number of dedicated technical service personals /
engineers are designated / deployed for attending to the Service Request in a time bound manner and for
ensuring Timely Servicing / rectification of defects during warranty period, as per Service level agreement
indicated in the relevant clause of the bid.
26. Warranty
Timely Servicing / rectification of defects during warranty period: After having been notified of the defects
/ service requirement during warranty period, Seller has to complete the required Service / Rectification
within 7 days time limit. If the Seller fails to complete service / rectification with defined time limit, a
penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the
seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all
such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than
10% of the total contract value after which the Buyer shall have the right to get the service / rectification
done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be
liable to re-imberse the cost of such service / rectification to the Buyer.
27. Purchase Preference (State)
Purchase preference to Micro and Small Enterprises (MSEs) from the State of Bid Inviting Authority :
Purchase preference will be given to MSEs as Micro and Small Enterprises from the State of Bid inviting
Authority whose credentials are validated online through Udyam Registration / Udyog Aadhaar (as
validated by Government from time to time) for that product category. If the bidder wants to avail the
Purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply
of goods. Traders are excluded from the purview of Public Procurement Policy for Micro and Small
Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered Service.
Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 10 %
of margin of purchase preference /price band defined in relevant policy, such Seller shall be given
opportunity to match L-1 price and contract will be awarded for percentage of 50% of total value as
defined/ decided in relevant policy.
18 / 19
28. Past Project Experience
For fulfilling the experience criteria any one of the following documents may be considered as valid proof
for meeting the experience criteria:
a. Purchase Order copy along with Invoice(s) with self-certification by the bidder that supplies against the
invoices have been executed.
b. Execution certificate by client with order value.
c. Any other document in support of order execution like Third Party Inspection release note, etc.
Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome, and consequences thereof including any eccentricity/restriction arising in the
bidding process due to these ATCs and due to modification of technical specifications and/or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents/clauses
shall also be null and void. If any seller has any objection/grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations. Also, GeM does not permit collection of Tender
fee / Auction fee in case of Bids / Forward Auction as the case may be. Any stipulation by the Buyer seeking
payment of Tender Fee / Auction fee through ATC clauses would be treated as null and void.
This Bid is also governed by the General Terms and Conditions
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.
---Thank You---
19 / 19

GeM Bidding 3556081

Uploaded by

Copyright:

Available Formats

GeM Bidding 3556081

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GeM Bidding 3556081

Uploaded by

Copyright:

Available Formats

Bid Number: GEM/2022/B/2320180

Bid End Date/Time 18-07-2022 19:00:00

Bid Opening Date/Time 18-07-2022 19:30:00

Bid Offer Validity (From End Date) 75 (Days)

Ministry/State Name Maharashtra

Department Name Industries Department Maharashtra

Maharashtra State Electricity Transmission Corporation

Office Name Central Purchase Agency Corporate Office Mumbai

Total Quantity 375

Fixed Clean Agent Gas based cylinderless Fire Suppression

Minimum Average Annual Turnover of the

OEM Average Turnover (Last 3 Years) 66 Lakh (s)

Years of Past Experience Required for

MSE Exemption for Years Of Experience

Startup Exemption for Years of Experience

Experience Criteria,Past Performance,Bidder

Fixed Clean Agent Gas based cylinderless Fire Suppression

Time allowed for Technical Clarifications

Is Part Quantity Bidding Allowed? Yes

Estimated Bid Value 13345377.08

Evaluation Method Item wise evaluation

Advisory Bank HDFC Bank

EMD Percentage(%) 1.00

Advisory Bank HDFC Bank

ePBG Percentage(%) 10.00

Duration of ePBG required (Months). 26

Splitting Applied Yes

Maximum No. Of Bidders Amongst Which Order

MII Purchase Preference

MII Purchase Preference No

MSE Purchase Preference

MSE Purchase Preference Yes

Part Quantity Bidding

Evaluation Method ( Item Wise Evaluation Method )

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Fixed Clean Agent Gas Based Cylinderless Fire Suppression

Itemwise Minimum Capacity Required From Seller

Schedule Item Minimum

Fixed Clean Agent Gas based cylinderless Fire

Fixed Clean Agent Gas based cylinderless Fire

Fixed Clean Agent Gas based cylinderless Fire

Fixed Clean Agent Gas based cylinderless Fire

Fixed Clean Agent Gas based cylinderless Fire

Fixed Clean Agent Gas based cylinderless Fire

Brand Type Registered Brand

* As per GeM Category Specification

Specification Specification Name Bid Requirement (Allowed Values)

GENERIC System Operation The heat-sensitive polymer/Plastic tubing stores

CYLINDER-LESS AUTOMATIC Designed to fight fires that occur in the enclosed

Suitability of system Suitable for Totally closed as well as ventilated

Volume of protected 0.20-0.30 m³

Clean Agent listing UL

CONSTRUCTIONAL Clean agent Capacity in 0.25

Length of Heat Sensing 1.1