Starplast Spray-Applied-Plaster Data Sheet
Starplast Spray-Applied-Plaster Data Sheet
Starplast Spray-Applied-Plaster Data Sheet
Introduction
Spray-applied plasters are becoming a sine qua non for modern buildings, having become the main form of
plastering systems, given the economy, speed of completion and superior finish.
StarPlast™ range makes Trimix one of the leading manufacturers of applied plasters in Middle East. As the
application requires no artisan or skilled labour, the costs of application is one of the lowest for all surface
renderings.
StarPlast™ can be rendered on varied surfaces – concrete walls, aerated light-weight concrete blocks,
cement mortar, fair-face concrete blocks, polystyrene ceilings and soffits, precast panels, ALC block walls,
dry-wall partition. With excellent adhesion StarPlast™ obviates need for rush coats and chipping or hacking
of even the most irregular surfaces. In cost-benefit analysis which includes time overruns saved, StarPlast™
triumphs all traditional surface coating system.
Pre-mixed and with in-process quality control, including from the receipt of ingredients, provides for
consistently superior quality.
StarPlast Products is simplicity enough as compared to competing products. Its superiority over
other similar products is due to:
Better spreadability | No flaking | Great adhesion | Ease of use | Double-quick drying time |Vapour release
properties
StarPlast™ PrimaryCoat is premix compound with inert fillers and acrylic-based. The professionally-done
formulation enables coating thickness of up to 10mm on interior surfaces.
StarPlast™ Fine FinishCoat is pre-mixed white compound which is also acrylic based, for giving superior
finish of up to 3mm thickness for interiors. Its inherent quality dispenses with all, whether powder or
paste-based, fillers such as putties, stuccos etc. The uniformity rendered is so good that even primer paints
are not required after using StarPlast™ Fine FinishCoat, and the Top-coat paint can be limited to 1-2 coats as
opposed 3-4 coats required in traditional finishes. Ceilings can even be left uncoated without detracting in any
way from the aesthetics
StarPlast™ Aqua ResistCoat is washable variety of StarPlast™ Fine FinishCoat for wet /humid areas; this
has increased water-impermeability which renders higher protection and prevents surface degradation from
the dampness. This recommended for kitchens, washrooms, laundries etc.
Cost benefits
• Faster application
Against traditional output of 150 sq. metres per day, StarPlast™ can complete 600 sq. metres finished using
a team of three; in case of thick applications it can help you complete 250-300 sq. metres of finished wall
surfaces provided prepared surfaces and layout are ready.
• No curing
Curing of the surface is required only if StarPlast™ CementitiousEnhancer is used; even then only for 2 days.
This is against 7-day curing for traditional plaster. If CementitiousEnhancer is not used, no curing is required.
StarPlast™ plaster’s practicability provides for easy application and levelling giving the surfaces superlative
finish. What is more, the inherent quality provided by the polymer prevents/covers cracks effectively, which
also makes it superior to traditional plasters and other surface treatments. This quality is further enhanced by
the fillers used, as they are checked for particle size uniformity. This also means no rush coats are required
to cover cracks. The method of application using pressurised spray machines ensures superior adhesion and
a finish which, for instance in the ceilings, requires no top coats. And in other surfaces, no primer paints are
required.
• Clean the surface and make it free of dust, oil, and curing compounds. Then remove nails, stickers, masking
tape, cement overflow and drippings, wires, fixers, and any other extraneous matter.
• Surface defects should be repaired.
• Fix adequately fibre glass mesh (yellow or white) resistant to alkali and shear strain, and plaster stops, angle
beads, studs, etc.
• Cover wirings etc., as necessary.
• If necessary, apply a coat of StarBind, especially if the application is on fair-faced concrete.
Material Preparation
• Mix StarPlast™ CementitiousEnhancer 1 bag (25kg) with 4.5-5 litres of water (using a mechanical mixer).
• Add StarPlast™ PrimaryCoat (25kg) and mix homogenously.
Application
• Spray on the selected surface generally to a thickness of 8-10mm.
• Uneven surfaces need to be extra-sprayed for levelling.
• Smooth using "T" angle aluminium profiles and 60cm scrappers.
• Light mist curing should be done 24 hours after application and repeated after another 24 hours.
• Apply 1-2 coats of StarPlast™ Fine FinishCoat over the StarPlast™ PrimaryCoat.
• Leave to cure for a day; then lightly sand the surface to prepare surface for paint.
For ceilings, depending on substrate and if interior, use only StarPlast™ PrimaryCoat.
Please consult your Trimix representative for further information on application techniques.
Cost Savings
Non-Availability of Skilled Labour vs. Low Labour Requirements
For Traditional Plaster, skilled masons are required in large numbers for a short period of time. Labour supply
in inelastic in GCC countries, this contributes to the higher costs due to hiring charges, visa and labour
protection formalities.
With StarPlast System, labour requirement is cut by 75% for the same-size job as compared with Traditional
Plastering method.
Consistency of Plaster
The product is factory-mixed homogenous material. All ingredients are controlled and subjected to quality
control procedures ensuring consistency of product.
Reduced Cracking
Spray Plaster is a polymer based plaster which gives the product an in-built elasticity not found in traditional
plaster—this helps to reduce, if not eliminate, cracks. The plaster is based on fillers which are analysed
periodically with strictly controlled particle size distribution curves. Thus there is no cracking caused by
excessive dust and impurities in the sand.
Manufactured by :
Trimix LLC, P.O.Box.17490, Ajman, U.A.E. (a Percept enterprise)