HYDRAULIC CRAWLER CRANE

Model: CKL1000i

Max. Lifting Capacity: 100 t x 3.0 m*

Max. Crane Boom Length: 61.0 m
Max. Fixed Jib Combination: 51.8 m + 18.3 m
*Auxiliary sheave is necessary.
GENERAL DIMENSIONS

Crane Boom (Unit: mm )

3,600

0
,3 8
800
R4

5,240 2,080

3,420 1,100

m 3,200
.2
12
om 1,600
Bo
s ic
Ba 940
6,200

1,990
3,320

3,220

390
1,770
1,115

5,440 3,500
(Retracted)
6,300
5,030
(Extended)

Limit of Hook Lifting

L L'
Hook L
100 t hook 4.1 m
70 t hook 4.1 m Hook L'
35 t hook 3.9 m 11 t ball hook 3.5 m

5
WORKING RANGES
AND LIFTING CAPACITIES

Crane Boom Working Ranges

82˚ 75˚ 70˚ 65˚ 60˚ 55˚
65
61.0m BOOM

57.9m BOOM 50˚

60

54.9m BOOM
55
51.8m BOOM

48.8m BOOM 45˚

50
45.7m BOOM

42.7m BOOM 45
40˚
39.6m BOOM
40
36.6m BOOM

33.5m BOOM 35˚

35

Height above ground (m)

30.5m BOOM
30˚
27.4m BOOM 30

24.4m BOOM
25
21.3m BOOM

18.3m BOOM
20
15.2m BOOM

12.2m BOOM
1.77m

10 15 20 25 30 35 40 45 50 52

Radius from center of rotation (m)

Center of
rotation

1.1m

NOTES:
1. Ratings according to EN13000. 8. Boom inserts and guy lines must be arranged as shown in the
2. Ratings in metric tons for 360˚ working area. “Operator's Manual”.
3. Operating radius is the horizontal distance from center of rotation to a 9. Boom hoist reeving is 12 part line.
vertical line through the center of gravity of the load. 10. Gantry must be in raised position for all conditions.
4. Weight of hook block (s), slings and other load handling accessories is 11. Boom backstops are required for all boom lengths.
included in rated load. Their total weight must be subtracted from rated 12. Crawler frames must be fully extended for all crane operations.
load to obtain weight that can be lifted. 13. Ratings shown in are determined by the strength of the boom
5. Ratings shown are based on freely suspended loads and make no or other structural component.
allowance for such factors as wind effect on lifted load, ground condi- 14. Instruction in the “Operator's Manual” must be strictly observed when
tions, out-of-level, operating speeds or any other condition that could be operating the machine.
detrimental to the safe operation of this equipment. Operator, therefore, 15. Crane boom ratings: Deduct weight of main hook block, slings, and all
has the responsibility to judge the existing conditions and reduce lifted other load handling accessories from crane boom ratings shown.
loads and operating speeds accordingly. 16. Auxiliary sheave ratings for crane boom: Deduct weight of ball hook,
6. Ratings are for operation on a firm and level surface, up to 1% gradient. slings, and all other load handling accessories from auxiliary sheave rat-
7. At radii and boom lengths where no ratings are shown on chart, opera- ings for crane boom shown.
tion is not intended nor approved. 17. Crane boom lengths for auxiliary sheave mounting are 12.2 m to 57.9 m.
8
Crane Boom Lifting Capacity
Unit: metric ton
Counterweight: 29.3 t, Carbody weight: 7.9 t
Boom Boom
length length
Working (m) 12.2 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.6 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)
3.0 100.0 3.4m/90.0 3.0
4.0 86.5 86.4 86.2 4.3m/75.0 4.7m/65.4 4.0
5.0 70.1 69.9 68.2 64.8 61.5 5.1m/49.2 5.6m/47.9 5.0
6.0 53.0 52.8 52.7 50.3 48.2 46.3 44.4 42.6 6.4m/37.3 6.8m/34.8 6.0
7.0 45.6 45.4 44.0 42.2 40.6 39.2 37.8 36.5 35.3 34.1 7.3m/31.7 7.7m/28.0 7.0
8.0 38.1 38.3 37.7 36.3 35.1 34.0 32.8 31.8 30.8 29.8 28.9 27.8 8.3m/21.9 8.5m/19.2 8.0
9.0 32.1 32.5 32.4 31.8 30.8 29.9 28.9 28.1 27.3 26.5 25.7 25.0 20.8 18.6 9.1m/16.2 9.4m/13.9 9.8m/11.8 9.0
10.0 27.1 28.1 28.0 27.9 27.4 26.7 25.8 25.1 24.5 23.8 23.1 22.5 19.5 17.4 15.2 13.4 11.7 10.0
12.0 11.8m/19.6 22.1 22.0 21.8 21.7 21.7 21.2 20.7 20.2 19.6 19.1 18.6 17.3 15.4 13.3 11.7 10.2 12.0
14.0 17.1 18.0 17.9 17.7 17.7 17.5 17.4 17.1 16.6 16.1 15.8 15.4 13.8 11.9 10.4 9.0 14.0
16.0 14.4m/16.1 15.2 15.0 14.9 14.8 14.7 14.6 14.5 14.3 13.9 13.6 13.3 12.4 10.7 9.3 8.0 16.0
18.0 17.0m/13.4 12.9 12.8 12.7 12.5 12.5 12.4 12.2 12.1 11.9 11.6 11.4 9.7 8.4 7.2 18.0
20.0 19.6m/11.3 11.2 11.1 10.9 10.8 10.7 10.6 10.4 10.4 10.3 10.0 8.9 7.6 6.5 20.0
22.0 9.9 9.8 9.6 9.5 9.4 9.3 9.1 9.0 9.0 8.9 8.1 7.0 5.9 22.0
24.0 22.3m/9.7 8.7 8.5 8.4 8.3 8.2 8.1 8.0 7.9 7.8 7.5 6.4 5.4 24.0
26.0 24.9m/8.3 7.6 7.6 7.5 7.3 7.2 7.1 7.0 6.9 6.8 5.9 4.9 26.0
28.0 27.6m/7.1 6.8 6.7 6.6 6.4 6.3 6.3 6.1 6.0 5.4 4.5 28.0
30.0 6.2 6.1 5.9 5.8 5.7 5.6 5.5 5.4 5.0 4.1 30.0
32.0 30.2m/6.1 5.5 5.4 5.2 5.1 5.1 4.9 4.8 4.6 3.8 32.0
34.0 32.9m/5.3 4.9 4.7 4.7 4.6 4.4 4.3 4.3 3.4 34.0
36.0 35.5m/4.6 4.3 4.2 4.1 4.0 3.9 3.8 3.2 36.0
38.0 4.0 3.9 3.8 3.6 3.5 3.4 2.9 38.0
40.0 38.1m/3.9 3.5 3.4 3.3 3.1 3.0 2.6 40.0
42.0 40.8m/3.4 3.1 3.0 2.8 2.7 2.3 42.0
44.0 43.4m/2.9 2.7 2.6 2.5 2.1 44.0
46.0 2.4 2.3 2.2 1.9 46.0
48.0 46.1m/2.4 2.0 1.9 1.7 48.0
50.0 48.7m/1.9 1.8 50.0
52.0 51.3m/1.7 52.0
Reeves 8* 8* 7* 6 6 4 4 4 3 3 3 3 2 2 2 2 2 Reeves

Note:
Ratings according to EN13000. (Ratings 75% tipping load)
Ratings shown in are determined by the strength of the boom or other structural components.
Refer to notes P8.

*Auxiliary sheave is necessary.