Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    Standard Downtilt Kit For Panel Antennas (Wind Load Category "L" and "M")

    Uploaded by

    Bedirhan Kapkiç
    This document provides information about a standard downtilt kit for panel antennas. The downtilt kit is made of hot-dip galvanized steel and stainless steel, weighs 2.3 kg, and is intended for use with panel antennas that have attached mounting plates. It enlarges the spacing between the mast and antenna by 84 mm. Instructions are provided for adjusting the downtilt angle and mounting the kit with the appropriate clamps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Standard Downtilt Kit For Panel Antennas (Wind Load Category "L" and "M")

    Uploaded by

    Bedirhan Kapkiç
    78 views2 pages
    This document provides information about a standard downtilt kit for panel antennas. The downtilt kit is made of hot-dip galvanized steel and stainless steel, weighs 2.3 kg, and is intended for use with panel antennas that have attached mounting plates. It enlarges the spacing between the mast and antenna by 84 mm. Instructions are provided for adjusting the downtilt angle and mounting the kit with the appropriate clamps.

    Original Title

    737978

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a standard downtilt kit for panel antennas. The downtilt kit is made of hot-dip galvanized steel and stainless steel, weighs 2.3 kg, and is intended for use with panel antennas that have attached mounting plates. It enlarges the spacing between the mast and antenna by 84 mm. Instructions are provided for adjusting the downtilt angle and mounting the kit with the appropriate clamps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    78 views2 pages

    Standard Downtilt Kit For Panel Antennas (Wind Load Category "L" and "M")

    Uploaded by

    Bedirhan Kapkiç
    This document provides information about a standard downtilt kit for panel antennas. The downtilt kit is made of hot-dip galvanized steel and stainless steel, weighs 2.3 kg, and is intended for use with panel antennas that have attached mounting plates. It enlarges the spacing between the mast and antenna by 84 mm. Instructions are provided for adjusting the downtilt angle and mounting the kit with the appropriate clamps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Standard Downtilt kit

    for Panel Antennas


    (Wind load Category “L” and “M”)

    Downtilt kit

    Type No. 737978


    Preferred range of use – Panel antennas with attached mounting plates
    – Downtilt kit without scale for universal use
    Weight 2.3 kg
    Material Hot-dip galvanized steel
    Screws Hot-dip galvanized steel / stainless steel
    Nuts / washers Stainless steel

    20 Nm / M8

    20 Nm / M8

    50 Nm / M12 64 70

    Ø 8.5

    Before the adjustment, all joint


    screws must be loosened.
    After the adjustment has been
    completed, all loosened screws

    336
    must be tightened.

    Mounting accessories included.

    64
    50
    Ø 8.5

    115

    20 Nm / M8
    Subject to alteration.
    936.3323/c

    Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
    Mounting this downtilt kit enlarges the spacing between mast and antenna by 84 mm.
    Use the downtilt kit together with the clamps as described in the antenna datasheet.

    www.kathrein.de 737978 Page 1 of 2


    KATHREIN-Werke KG · Anton-Kathrein-Straße 1 – 3 · P.O. Box 10 04 44 · 83004 Rosenheim · Germany · Phone +49 8031 184-0 · Fax +49 8031 184-973
    Standard Downtilt kit
    for Panel Antennas
    (Wind load Category “L” and “M”)

    Distance “A” between the jointbolts of


    the downtilt kit in mm (max. 395 mm).
    You will find the values for “A” on the
    sticker on the backside of the antenna.

    For example:

    Subject to alteration.
    936.3323/c

    Page 2 of 2 737978 www.kathrein.de


    KATHREIN-Werke KG · Anton-Kathrein-Straße 1 – 3 · P.O. Box 10 04 44 · 83004 Rosenheim · Germany · Phone +49 8031 184-0 · Fax +49 8031 184-973

    You might also like