All Cat 107

MODEL: BOBCAT - Skid Steer: T190, T200, T250, T300,
864
NEW VPI # OEM# Description
Rubber Track
V50230S Rubber Track, T190
V50230V Rubber Track, T190 (Optional)
V50233S Rubber Track, T200, 320mm Track Width
V50233V Rubber Track, T200, 320mm Track Width (Optional)
V52452S Rubber Track, T200, 450mm Track Width
V52452V Rubber Track, T200, 450mm Track Width (Optional)
V52455S Rubber Track, T250/T300
V52455V Rubber Track, T250/T300 (Optional)
Sprocket
V6715821V Sprocket, 17T - 6 B/H, Models T200/T250/T300 (Note: Sprocket may have been upgraded
to 77107787 "dished" sprocket. Must verify part number on old sprocket.
V6726052V Sprocket, 15T - 6 B/H, Model T190 (18mm Flange) (Confirm Mounting Flange Thickness)
The original drive motor (P/Ns 6681483 & 6683006) and drive sprocket (P/N
6726052) are no longer available from the OEM. When replacement of the
drive motor or drive sprocket is required, parts ordered from the OEM are
listed below: (VPI now carries P/N 6726052 & 6736306)
A - Drive Motor P/Ns 6681493 or 6683006 - OEM supplies qty (1) 6686384
drive motor and qty (1) 6736306 Sprocket w/16mm flange thickness.
B - Drive Sprocket P/N 6726052 - OEM supplies qty (1) 6736308 sprocket
V6736306V w/27mm flange thickness and qty (6) 31C1228 Mounting Bolt.
Roller
V6732901V Roller Group, Models T190/T200/T250/T300 (8 Roller Required)
Idler
V6732902V Front Idler Group, Models T190/T200/T250/T300
V6732903V Rear Idler Group, Models T190/T200/T250/T300
Page 1
MODEL: BOBCAT - Mini Excavator: X320, X322, X322D
V42545 Rubber Track - 250 x 72 x 45
V62333 Rubber Track - 230 x 96 x 33
V62333V Rubber Track - 230 x 96 x 33 (Optional)
V6801584V Sprocket
Page 2
MODEL: BOBCAT - Mini Excavator: X325
V63272 Rubber Track
V63272V Rubber Track (Optional)
V6587308V Sprocket
Page 3
MODEL: Cameco CHT2500
Specs Pitch = 6.75", Link Ht = 101.3 mm, Bushing OD = 57.4
mm, Bolt Hole = 5/8"
Serial Nos: CHT2500: (48L)

Unsealed Chains
VCR4858/48F Chain, 48L, Unsealed, w/ Master Pin
**Call ValuePart to Customize
Your Track Groups
VCR4874/47 Pin & Bushing Group, 47L
VCR4858F Link Segment
VCR2845 Track Link, R.H.
VCR2845V Track Link, R.H. (V-Track)
VCR2846 Track Link, L.H.
VCR2846V Track Link, L.H. (V-Track)
VCR3196 Sealed Pin
VCR3194 Master Pin
VCR3193F Master Pin Complete
VCR3195V Track Bushing
VCR2561F Master Bushing
VCR3197F Spacer
Sealed Chains
VCR4858/48 Chain, 48L, Sealed, w/ Master Pin-Excavator Style
Your Track Groups
VCR3193 Master Pin Complete
VCR3196 Sealed Pin
VCR3195 Sealed Bushing
VCR2561 Sealed Master Bushing
VCR3194 Sealed Master Pin
VCR2562 Seal Washer
VCR3197 Spacer
Sealed & Greased Chains
VCR4858/48HD Chain, 48L Sealed & Greased With Master Pin
Your Track Groups
VCR4874/51HD Pin & Bushing Group, 51L Sealed & Greased
VCR4858HD Link Segment
VCR4872HD Track Pin
VCR3194HD Master Pin
VCR2562HD Seal, Polyurethane
VCR3197F Spacer
VCR3195HD Bushing
Page 4
Lubricated Chains
VCR4261/48 Chain, 48L, SALT, w/ SML
Your Track Groups
VCR4263/38 Pin and Bushing GRP, 38L NOTE: Not interchangeable with OEM
VCR4263/36 Pin and Bushing GRP, 36L NOTE: Not interchangeable with OEM
VD4SMLPIN Joining Pin for Split Master Link (Extra)
VCR4331 Master Link Complete, R.H. (2 pieces)
VCR4332 Master Link Complete, L.H. (2 pieces)
VCR3573 Salt Pin
VCR4339 Salt Bushing
VCR3992 Seal Assembly
VCR3575 Thrust Ring
VCR3433 Plug Assembly
Sealed SML Chains
VCR3628/48 Chain, 48L, w/ SML
VCR3628/48V Chain, 48L, w/ SML (Optional)
Your Track Groups
VLSD4DRY Link Segment (For Old Style Standard Links)
VCR2849P Link Segment (For New Style Pro Links. PRO 4 is cast on side of Link)
VCR3568V Master Link Complete, R.H. (2 pieces) (V-Track)
VCR3569 Master
M t Link
Li k CComplete,
l t LL.H.
H (2 pieces)
i )
VCR3569V Master Link Complete, L.H. (2 pieces) (V-Track)
VCR3193 2V4699 Master Pin Complete
VCR3196 9K4060 Sealed Pin
VCR3195 9K4061 Sealed Bushing
VCR2561 7K2020 Sealed Master Bushing
VCR3194 9K4062 Sealed Master Pin
VCR2562 7K2018 Seal Washer
VCR3197 9K4059 Spacer
Bottom Rollers
VCR1328V Roller Assembly S/F (Note: Must use this roller for Cameco because of polished shaft)
VCR1329V 251348824 Roller Assembly D/F (Note: Must use this roller for Cameco because of polished shaft)
Carrier Rollers
VCR2880 251348824 Carrier Rollers (2-Required)
VCR2880V Carrier Rollers (2-Required) (Optional)
Idlers
VAT104 Idler Group
Sprockets
VS01045E0Y00 Segment Group
Page 5
MODEL: Cameco CH2, CH2600
Specs Track Pitch = 7.984", Link Height = 121.5 mm, Bolt
Diameter = 3/4"
Serial Nos: CH2: (47L)
CH2600: (47L)
Sealed Chains
VCR3307/47 251398343 Chain, 47L, Sealed, w/ SML
Your Track Groups
Lubricated Chains
Your Track Groups
VCR3313/36 Pin and Bushing Group, 36L
VCR3649/36 Bushing Group, 36L
VCR3319 Salt Pin
VCR3321 Ring
Track Shoes
VCR2298/20 251402502 Track Shoe, 3 B 20" w/ Mud Hole
VCR3844/20 251402510 Track Shoe, Master, 3 B 20" w/ Mud Hole
Track Hardware
V1S1859 251402530 Track Bolt 3/4" X 2 13/64
V1S1860 T51524 Track Nut 3/4"
Bottom Rollers
VCR5365V Roller Assembly S/F
VCR5366V 581378868 Roller Assembly D/F
Carrier Rollers
VCR2650 581398447 Carrier Rollers (4-Required) (For CH2 Model)
VCR2650V Carrier Rollers (4-Required) (For CH2 Model) (Optional)
VCR4800 Carrier Rollers (4-Required) (For CH2600 Model)
VCR4800V Carrier Rollers (4-Required) (For CH2600 Model) (Optional)
Sprockets
VID1462 221398451 Sprocket Segment Group (Includes 5 pcs T149332)
VID1462V 221398451 Sprocket Segment Group (Includes 5 pcs T149332) (Optional)
Idlers
V5209270 5209270 Idler With Blocks
VVA1659 Idler Unit With Forks
VVA1658 581378866 Idler Unit With Track Adjuster
Page 6
MODEL: Cameco CHT2500HD
Specs
Serial Nos:
Bottom Rollers
VCR1329V 251348824 Roller Assembly D/F (16-Required) Must use this roller for Cameco models because of the
polished shaft
Carrier Rollers
VCR2880 251348824 Carrier Rollers (2-Required)
Page 7
MODEL: CASE 420CT SSL
NEW VPI # O.E.M. # Description
V50231V Rubber Track
Page 8
MODEL: CASE 440CT SSL
Page 9
MODEL: CASE 445CT, 450CT SSL
Page 10
MODEL: CASE LT185.B, LT190.B
V52455V Rubber Track 450mm x 86 x 56
V54055V Rubber Track 400mm x 86 x 56
Page 11
MODEL: CASE 310
Specs Pitch= 149mm, Link Ht.= 78mm, Bushing O.D.=
38.1mm, Bolt Hole Dia.= 7/16"
Serial Nos: 310E:(33L) 8-Bottom Rollers, 2-Carrier Rollers
NEW VPI # OEM # Description
Sealed Chains and Track Groups
VCA307/33 Chain, 33L, Sealed, w/ Master Pin (Confirm # of Links - Some Machine 31 LK)
VCA307/33V Chain, 33L, Sealed, w/ Master Pin (Optional) (Confirm # of Links - Some Machine 31 LK)
VCA305/33/12 Track Group, 33L, Sealed, w/ Master Pin, w/ 1 B 12" Shoe
Your Track Groups
VCA311/33 Pin and Bushing Group, 33L, Master Pin Type-USE FOR ATD49615
VCA307 Link Segment
VCA102 Link R.H.
VCA103 Link L.H.
VCA107 Track Pin
VCA308 Track Bushing
VCA312 Master Pin Complete
VCA310 Seal Washer
Track Shoes
VCA111/10 Track Shoe, w/ 1 B 10"
VCA111/14V Track Shoe, w/ 1 B 14" (Optional)
VCA112/12 Track Shoe
Shoe, w/ 3 B 12"
12
Track Hardware
V2B5484 Track Bolt, 7/16 x 1 5/8
V7K1706 Track Nut, 7/16
Bottom Rollers
VCA127 Roller Assembly, SF
VCA127V Roller Assembly, SF (Optional)
Sprockets
VCA332 Sprocket
VPV410 Spacer (Use spacer for Case 310 Models)
Page 12
MODEL: CASE 350, 350B
Specs Pitch= 149mm, Link Ht.= 78mm, Bushing O.D.=
38.1mm, Bolt Hole Dia.= 7/16"
Serial Nos: 350:(33L) 10-Bottom Rollers, 2-Carrier Rollers
350B:(33L) 10-Bottom Rollers, 2-Carrier Rollers

VCA307/33 Chain, 33L, Sealed, w/ Master Pin
VCA307/33V Chain, 33L, Sealed, w/ Master Pin (Optional)
VCA663/33 Chain, 33L, Sealed, w/ Master Pin, Heavy Duty
Your Track Groups
VCA311/33 Pin and Bushing Group, 33L, Master Pin Type-USE FOR ATD49615
VCA307 Link Segment
VCA102 Link R.H.
VCA103 Link L.H.
VCA107 Track Pin
VCA310 Seal Washer
Track Hardware
V2B5484 Track Bolt 7/16 X 1 5/8"
V7K1706 Track Nut 7/16"
Track Shoes
Bottom Rollers
Carrier Rollers
VCA302 Carrier Roller Assembly
Sprockets
VCA332 Sprocket
Idlers
V128844A1 Idler With Brackets Fits For Both Left and Right Side
Page 13
MODEL: CASE 450
Specs Track = 5.875" , Link Ht = 80mm, Bolt Diameter =
1/2", Bushing OD = 44.45mm
Serial Nos: 450:up to 3039109 (36L) 10-Bottom Rollers, 2-Carrier Rollers
450: 3039110-3050800 (37L) 10-Bottom Rollers, 2-Carrier Rollers

Your Track Groups
VLSCA450DRY Link Segment
VCA275/37 Pin and Bushing Group, 37L
V450SMLPIN1 Joining Pin for Split Master Link (Extra)
VCA281 Link, R.H.
VCA282 Link, L.H.
VID634 Seal Washer
VID65 Pin
VCA276 Bushing
Track Hardware
V70234944 Track Bolt, 1/2 x 1 1/2
V6S3419 Track Nut, 1/2 - SQ
Track Shoes
VCA271/14 Track Shoe, w/ 3 B 14" w/ Mud Hole
Bottom Rollers
VCA214 Roller Assembly, SF (Qty 10)
VCA214V Roller Assembly, SF (Qty 10) (Optional)
VIN2438 R39273 Seal Group
Carrier Rollers
VCA262 Carrier Roller Assembly
VR33607 Seal Group
Sprockets
VCA296 Sprocket 25 Teeth-S/N Up to 3039109 (Optional)
VCA296V Sprocket 25 Teeth-S/N Up to 3039109 (Optional)
VCA333 Sprocket 27 Teeth-S/N 3039110-3050800
VD50421 Sprocket 27 Teeth-S/N 3039110-3050800 (LGP Machines)
Idlers
Page 14
VCA226 Front Idler with Shaft
V662590C91 Seal Group (R39273)
Page 15
MODEL: CASE 450A, 450B, 450C, 455B, 455C, 550
Specs Track Pitch = 6" , Link Height =88.9mm, Bushing
O.D.= 46.8mm, Bolt Diameter = 1/2"
Serial Nos: 450A:3050801 up (36L) 10-Bottom Rollers, 2-Carrier Rollers
450B: (36L) 10-Bottom Rollers, 2-Carrier Rollers
450C:(36L) 10-Bottom Rollers, 2-Carrier Rollers
450C-LGP:(39L)- Extended Frame 10-Bottom Rollers, 2-Carrier Rollers
455C: (36L) 10-S/F Rollers, 2-Carrier Rollers
550: Up to JAK0013968: (39L)

VCA744/36 Chain, 36L, Sealed, w/ Master Pin (Bushing O.D. = 1.843")
VCA744/36V Chain, 36L, Sealed, w/ Master Pin (Bushing O.D. = 1.843") (Optional)
VCA744/39V Chain, 39L, Sealed, w/ Master Pin (Bushing O.D. = 1.843") (Optional)
VCA754/36/16V Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe (Optional)
Your Track Groups
VLS450CDRY Link Segment
VCA377/36 Pin and Bushing Group, 36L (C450A Only)
VCA745/36 Pin and Bushing Group,
Group 36L - ((**For
For Bushing O.D.
O D =1.843
=1 843" ONLY)-450C
ONLY) 450C
VCA745/39 Pin and Bushing Group, 39L - (**For Bushing O.D. =1.843" ONLY)-450C
VCR3014 Seal Washer
VCA748 Pin
VCA749 Master Pin
VCA391 Seal Washer
VCA746 Bushing (1.843")
VCA747 Master Bushing
VCA753 Master Pin Complete-C450C ONLY
Lubricated Chains and Track Groups
VCA725/36 Chain, 36L, SALT, w/ SML
VCA725/36V Chain, 36L, SALT, w/ SML (Optional)
VCA726/36/14 Track Group, 36L, SALT, w/ SML, w/ 1 B 14" Shoe
VCA726/36/16V Track Group, 36L, SALT, w/ SML, w/ 1 B 16" Shoe (Optional)
Your Track Groups
VBG450SALT Bushing Group, 36L
VCA731 Track Link, R.H.
VCA732 Track Link, L.H.
VCA738 Track Pin
Page 16
VCR3619 R52300 Seal Group
VCR3618 R52299 Thrust Ring
V450ASMLPIN Joining Pin for Split Master Link (Extra)
VCA740 Master Link Complete-R.H. (2 Pieces)
VCA739 Master Link Complete-L.H. (2 Pieces)
Track Hardware
VR24688 Track Bolt, 1/2 x 1 1/2
V6S3419 Track Nut, 1/2 - SQ
VID610 Master Link Bolt (1/2" x 3 7/32") (2 needed)
VID625 Master Link Bolt (1/2" x 2 3/16") (2 needed)
Track Shoes
VCA409/14V Track Shoe, w/ 3 B 14" w/ Mud Hole (Optional)
Bottom Rollers
V662590C91 Seal Group
Carrier Rollers
VCA349 Carrier Roller Assembly (450A ser 3050801-up, 450B, 450C)
VCA349V Carrier Roller (Optional)
VR33607 Seal Group
VR33969 Shaft W/Collar
Sprockets
VCA379 R24570 Sprocket, 27 Teeth (For 450A/B Models)
VCA379V R24570 Sprocket, 27 Teeth (For 450A/B Models) (Optional)
VR24569 Sprocket, 27 Teeth, 7-Bolt Hole (For 50 Gauge Machines) (Effective with 450A S/N:
3050801-3067650, 450B S/N: 3067651- 3076100)
VCA690 R52698 Sprocket, 25 Teeth (450C, 455C) Note: Sprocket has 3/4" Bolt Hole
VCA690V Sprocket, 25 Teeth (450C, 455C) (Optional)
VR56390 R56390 Relieved Sprocket, 25 Teeth-(450C, 455C) Note: Sprocket has 3/4" Bolt Hole
VR52699 R52699 Sprocket, 25 Teeth (450C-LGP)
V0L1178 19H3158 Sprocket bolt 3/4 X 2 (7- Needed per side)
V5P8248 R78019 Sprocket Washer 3/4 (7- Needed per side)
Idlers
VCA443 Front Idler Group 450A-S/N 3050801-3067350
VCA513 Front Idler Group 450B-S/N 3067351-3076100
VCA693 Front Idler Group 450C-S/N 3076102-up, 455C
VCA693V Front Idler Group 450C-S/N 3076102-up, 455C (Optional)
VCA693K Idler update kit (Kit Components listed below)
V3F8638 Spring (4-Required per idler group)
V4B0897 Plate (4-Required per idler group)
VR58720 Wear plate (2-Required per idler group)
V0S1594 Bolt (3/8 x 1 NC) (4-Required per idler group)
V4B4278 Washer 3/8" (4-Required per idler group)
D35276 Wear Bar (Not Included in CA693K Kit, OEM Only)
Page 17
R35793 Shim, Wear Bar (Not Included in CA693K Kit, OEM Only)
Page 18
MODEL: CASE 550. 550E, 550G, 550H
Specs Track Pitch = 6.29" , Link Height =90mm, Bushing
OD = 2.0", Bolt Hole = 9/16"
Serial Nos:
550: JAK0013969-Up: (37L) 12-Bottom Rollers, 2-Carrier Rollers
550E: (37L) 12-Bottom Rollers, 2-Carrier Rollers
550G: (37L) 12-Bottom Rollers, 2-Carrier Rollers
550H: (37L) 12-Bottom Rollers, 2-Carrier Rollers

VR57371 Chain, 37L, Sealed, w/ Master Pin
VR57371V Chain, 37L, Sealed, w/ Master Pin (Optional)
VR57371/37/16 Track Group, 37L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe
VR57371/3716V Track Group, 37L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe (Optional)
Your Track Groups
VR57413 Pin & Bushing Group 37L Sealed
VR57404 Track Link R.H.
VR57403 Track Link L.H.
VR57378 Track Bushing
VR57367 Track Pin
VR57366G Master Pin Group
VR57366 Master Pin
VR57411 Spacer
VR57379 Master Bushing
VCR3014 Seal Washer
VCA775/37 130345A1 Chain, 37L, SALT, w/ SML
VCA775/37/16 132735A2 Track Group, 37L, SALT, w/ SML, w/ 1 B 16" Shoe
VCA775/37/16V 132735A2 Track Group, 37L, SALT, w/ SML, w/ 1 B 16" Shoe (Optional)
Your Track Groups
VR57415 Pin & Bushing Group 37L SALT
V220558A1 Master Link R.H.
V220557A1 Master Link L.H.
VR57404 Track Link R.H.
VR57403 Track Link L.H.
VR57369 Track Bushing
VR57368 Track Pin
VR57377 Thrust Ring
VID596 Seal Assembly
VCR3620 Plug
Track Hardware
V7H3596 Track Bolt 9/16 X 1 15/16
V7K2017 Track Nut 9/16
V616199C1 135984A1 Master Bolt Short 2-Required 9/16 X 2 3/16
V5P4684 133796A1 Master Bolt Long 2-Required 9/16
Track Shoes
VR57417 Track Shoe, w/ 1 B 16"
VR57417V Track Shoe, w/ 1 B 16" (Optional)
V357468A1 Track Shoe, w/ 1 B 26"
Page 19
Bottom Rollers
Carrier Rollers
VCA349 Carrier Roller (Fits All Models)
V198941A1 Carrier Roller Fits 550G/H (Use CA349 if 198941A1 is not available)
Sprockets
VR57281 Sprocket , 25 Tooth, 550-LGP, 550E-LGP, 550G-LGP
VR57281V Sprocket , 25 Tooth, 550-LGP, 550E-LGP, 550G-LGP (Optional)
VR57298 Sprocket , 25 Tooth, 550, 550E, 550G-LT, 550H
VR57298V Sprocket , 25 Tooth, 550, 550E, 550G-LT, 550H (Optional)
VR57392 Relief Sprocket , 25 Tooth, 550, 550E, 550G-LT
V0L1178 19H3158 Sprocket bolt 3/4 X 2 (7- Needed per side)
Idlers
VCA693 Front Idler Group w/Brackets (550G & 550H)
VCA693V Front Idler Group w/Brackets (550G & 550H) (Optional)
VR24542 Bushing
R33607 Seal Group
VD35266 Thrust Washer
VCA693K Idler update kit (See components listed below)
V0S1594 Bolt (3/8 x 1 NC) (4-Required
(4 Required per idler group)
R58373 Wear Bar (Not Included in CA693K Kit, OEM Only)
Page 20
MODEL: CASE 650G
OD = 57mm , Bolt Hole = 9/16"
Serial Nos: 650G: (36L) 6-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
CHECK BOLT HOLE SIZE - For 5/8" use 650H

Your Track Groups
VR56490 Link R.H.
VR56489 Link L.H.
VR56517 Bushing
VCR3196 Pin
VCR2562 Seal Washer
VR50210 Spacer
VR57090 129021A1 Chain, 36L, SALT, w/ SML
VR57090V 129021A1 Chain, 36L, SALT, w/ SML (Optional)
VR57090/36/18 132749A1 Track Group, 36L, SALT, w/ SML, w/ 1 B 18" Shoe
Your Track Groups
VR56024 Pin & Bushing Group 38L SALT
VR56490 Link R.H.
VR56489 Link L
L.H.
H
VR56515 Salt Bushing
VCR3573 Salt Pin
VCR3575 Spacer
VCR3433 Plug
Track Hardware
VD48004 Track Bolt 9/16 X 2 1/32
V5P4684 Master Bolt short 2-Required
VR44189 Master Bolt long 2-Required (9/16" X 85mm Shoulder Bolt)
Track Shoes
VCA880/16 R56737 Track Shoe, w/ 1 B 16"
VCA880/18 R56739 Track Shoe, w/ 1 B 18" (R57540)
VCA880/18V R56739 Track Shoe, w/ 1 B 18" (R57540) (Optional)
VCA880/29 R56743 Track Shoe, w/ 1 B 29" (LGP Machines)
VCA880/29V R56743 Track Shoe, w/ 1 B 29" (LGP Machines) (Optional)
Bottom Rollers
VCA167 R56593 Roller Assembly S/F (6-Required)
VCA167V Roller Assembly (Optional)
VCA168 R56874 Roller Assembly D/F (4-Required)
VCA168V R56874 Roller Assembly D/F (4-Required) (Optional)
VIN2438 Seal Group
Carrier Rollers
VCA349 Carrier Roller
Page 21
V198941A1 Carrier Roller Fits 650G (Use CA349 if 198941A1 is not available)
Sprockets
VR56464 Sprocket (23-Teeth, 10- Bolt Hole)
VR56464V Sprocket (23-Teeth, 10- Bolt Hole) (Optional)
VOK483 Sprocket Rim (For Repair)
VOK483V Sprocket Rim (For Repair) (Optional)
V1A8063 19H2411 Sprocket bolt 3/4 X 2.1/2 (10- Needed per side)
Idlers
VCA620 Front Idler Group Complete (R55677)
VCA620V Front Idler Group Complete (Optional)
VCA699 Front Idler Shell w/ Bushing
V106919A1 Wear plate (4-Required per idler group)
R32465 Wear Bar (Not Included in Kit, OEM Only)
R32491 Shim, Wear Bar (Not Included in Kit, OEM Only)
Page 22
MODEL: CASE 650H
OD = 57mm , Bolt Hole = 5/8"
Serial Nos: 650H: (36L) 12-Bottom Roller, 2-Carrier Roller

V295211A1 Chain, 36L, Sealed, w/ Master Pin
Your Track Groups
Extended Life Track Sealed Chains *OEM Only*
295195A1 Chain, 36L, Sealed, Extended Life, w/ 2-Bolt Master Link
295200A1 Chain, 36L, Sealed, Extended Life, w/ 1-Bolt Master Link
Your Track Groups
Lubricated Chains
V295203A1 295203A1 Chain, 36L, SALT, w/ SML
Your Track Groups
Extended Life Track Lubricated Chains *OEM Only*
295203A1 Chain, 36L, SALT, Extended Life, w/ 2-Bolt Master Link
295200A1 Chain, 36L, SALT, Extended Life, w/ 1-Bolt Master Link
Your Track Groups
Track Hardware
V7H3597 Track Shoe Bolt, 5/8"
V1M1408 Track
T k shoe
h NNut, 5/8"
/8"
Track Shoes
V295181A1 295181A1 Track Shoe, w/ 1 B 18"
V295181A1V 295181A1 Track Shoe, w/ 1 B 18" (Optional)
V328940A1 328940A1 Track Shoe, w/ 1 B 16" w/ Mud Hole
V303471A1V 303471A1 Track Shoe, w/ 1 B 18" w/ Mud Hole (Optional)
Bottom Rollers
VCA378 R57357 Roller Assembly, SF
Carrier Rollers
V198941A1 Carrier Roller Assembly (Can Use VCA349 or VCA349V)
Sprockets
V328459A1 Sprocket, 23-Tooth, 20-Bolt Hole (650H WT, 650H LGP)
V328453A1 Sprocket, 12-Tooth, 20-Bolt Hole (650H-WT, 650H-LGP w/ CELT) Currently Not Available
V322122A1 Sprocket, 23-Tooth, 20-Bolt Hole (650H-LT) Currently Not Available - Can Use VR56464
V322018A1 Relieved Sprocket, 23-Tooth, 20-Bolt Hole Currently Not Available
V321681A1 Sprocket, 12-Tooth, 20-Bolt Hole (650H-LT w/ CELT) Currently Not Available
Idlers
VCA693 329712A1 Idler Group
VCA693V 329712A1 Idler Group (Optional)
VCA693K Idler update kit (Kit Components Listed Below)
Page 23
D35276 Wear Bar (Not Included in CA693K Kit, OEM Only)
Page 24
MODEL: CASE 750, 800, 800B, 800C, 850, 850B, 850C,
850CLGP, 850D, 1000, 1000C, 1000D, 1150
Serial Nos: 750: Check Track Chain Length on Machine
800, 800B, 800C: Check Track Chain Length on Machine
850:Check Track Chain Length on Machine
850C: 38 Link w/ 15" Triple Bar, 10 S/F, 2 T/C
850C LGP: Check Track Chain Length on Machine
850D, 850D LGP: Check Track Chain length and Pitch on D Series Machine,
10- S/F Rollers, 2-Carrier Rollers
855C, 855D: Check Track Chain length and Pitch on D Series Machine
1000, 1150: Check Track Chain Length on Machine

VCA695/36 Chain, 36L, Sealed, w/ Master Pin (Bushing O.D. = 2.125")-855D
VCA695/38V Chain, 38L, Sealed, w/ Master Pin (Bushing O.D. = 2.125")-855D (Optional)
VCA695/40V Chain, 40L, Sealed, w/ Master Pin (Bushing O.D. = 2.125")-855D (Optional)
VCA715/38/17 Track Group
Group, 38L
38L, Sealed
Sealed, w/ Master Pin
Pin, w/ 1 B 17"
17 Shoe
Your Track Groups
VLS850DRY1 Link Segment (96mm Link Height)
VCR2562 Seal Washer (R50211)
VCR3196 Sealed Track Pin (1.312" O.D. - 33.34mm)-(R49792)
VIN3478 Sealed Track Bushing (2.125 O.D. - 53.797mm)
VIN3480 Master Bushing
VCA232/40 Pin and Bushing Group, 40L (850D-2" Bushing)
Page 25
Your Track Groups
VCA673 Track Link R.H.
VCA672 Track Link L.H.
V850SMLPIN Joining Pin for Split Master Link (Extra)
VCR3573 SALT Pin (1.312" O.D. - 33.34mm)-(R51131)
VCA676 Bushing (2.125" O.D. - 53.797mm)
VCR3992 Seal Assembly (R50830)
VCR3575 Thrust Ring (R51132)
VCA675 Master Link Complete R.H. (2 Pieces)
VCA674 Master Link Complete L.H. (2 Pieces)
VCA671/38 Bushing Group, 38L
Track Hardware
VD48004 R15309 Track Bolt (9/16" x 2")
V7K2017 Track Nut, 9/16"
VD0207000N35 Master Link Bolt (2 Needed)
V7H3596 Master Link Bolt (2 Needed)
Track
T k ShShoes
VCA756/18M Track Shoe, w/ 1 B 18" w/ Mud Hole
Bottom Rollers
VCA167 Roller Group, SF
VCA167V Roller Group, (Optional)
VCA168 Roller Group, DF
VCA168V Roller Group, DF (Optional)
VIN2438 Seal Group
Carrier Rollers
Sprockets
VCA298 Sprocket 25 Teeth (Bolt on) 750/850
VCA543 Sprocket 25 Teeth (Bolt on-10 Bolt Hole) 850B/C/855C
VCA543V Sprocket 25 Teeth (Bolt on-10 Bolt Hole) (Optional) 850B/C/855C
Page 26
VCA677 Sprocket 25 Teeth (Bolt on-10 Bolt Hole) 850D w/ 2.125" O.D. Bushing, 855D
VCA677V Sprocket 25 Teeth (Bolt on-10 Bolt Hole) (Optional) 850D w/ 2.125" O.D. Bushing, 855D
VCA170 Sprocket 27 Teeth ( Bolt on-7 Bolt Hole) 1000/D/1050/1150
VCA170V Sprocket 27 Teeth ( Bolt on-7 Bolt Hole) (Optional) 1000/D/1050/1150
VR53117 Sprocket 25 Teeth (12 Bolt Hole) 850C & 850D LGP
Idlers
VCA620 Front Idler Group Complete (R55677) (850, 850B, 850C, 855C)
VCA620V Front Idler Group Complete (Optional) (850, 850B, 850C, 855C)
V126342A1 Idler With Brackets (Case 1150)
Page 27
MODEL: CASE 850D,E,G/ 855D,E
Specs Track Pitch = 6.75", Link Ht.= 96mm, Bushing O.D.=
57 mm, Bolt Hole= 9/16
850D-LT: (Second Type) (38L) 8-S/F Rollers, 4-D/F Rollers, 2-Carriers
850D-LGP: (Second Type) (38L) 8-S/F Rollers, 4-D/F Rollers, 2-Carriers
855D: (Second Type) (35L)
850E-LGP:(38L) 8-S/F Rollers, 4-D/F Rollers, 2-Carriers
855E: (35L)
850G-LT: (38L) 8-S/F,4-D/F, 2-T/C (Check Track Chain Bolt Diameter)
850G-LGP: (38L) 8-S/F, 4-D/F, 2-T/C (Check Track Chain Bolt Diameter)

VR56723V Chain, 38L, Sealed, w/ Master Pin (Optional)
VR56723/3818V Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 18" Shoe (Optional)
VR56723/38/29 Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 29" Shoe (LGP Machines)
Your Track Groups
VR56023 Pin & Bushing Group 38L Sealed w/Master Pin
VR56490 Link L.H.
VR56489 Link R.H.
VR56517 Bushing
VCR3196 Pin
VCR2562 Seal Washer
VR50210 Spacer
VR56513 Chain, 35L, SALT, w/ SML
VR56512 Chain, 38L, SALT, w/ SML
VR56512V Chain, 38L, SALT, w/ SML (Optional)
VR56513/35/18 Track Group, 35L, SALT, w/ SML, w/ 1 B 18" Shoe
VR56512/3818V Track Group, 38L, SALT, w/ SML, w/ 1 B 18" Shoe (Optional)
VR56512/3820V Track Group, 38L, SALT, w/ SML, w/ 1 B 20" Shoe (Optional)
VR56512/38/29 Track Group, 38L, SALT, w/ SML, w/ 1 B 29" Shoe (LGP Machines)
Your Track Groups
VR56024 Pin & Bushing Group 38L Sealed and Lubricated
VCA781V Link Segment (V-Track)
VR56490 Link L.H.
VR56489 Link R.H.
VR56515 Bushing
VCR3573 Pin
VCR3575 Thrust Ring
Page 28
VCR3433 Plug w/Stopper
Track Hardware
VD48004 Track Bolt 9/16 X 2 1/32
V5P4684 Master Bolt Short (2-Required)
VR44189 Master Bolt Long (2-Required 9/16X85 mm Shoulder Bolt)
Track Shoes
VCA880/18 R56739 Track Shoe, w/ 1 B 18" (R57540)
VCA880/18V R56739 Track Shoe, w/ 1 B 18" (R57540) (Optional)
VCA880/29 R56743 Track Shoe, w/ 1 B 29" (LGP Machines)
VCA880/29V R56743 Track Shoe, w/ 1 B 29" (LGP Machines) (Optional)
VR56757 R56757 Track Shoe, w/ 2 B 15"
VR56757V R56757 Track Shoe, w/ 2 B 15" (Optional)
Bottom Rollers
VCA167 Roller Assembly S/F
VCA167V Roller Assembly S/F (Optional)
VCA168 Roller Assembly D/F
VCA168V Roller Assembly D/F (Optional)
Carrier Rollers
989
V198941A1 Ca e Roller
Carrier o e (850G) (Use C 3 9 if 198941A1
CA349 989 s not
is ot a a ab e)
available)
Sprockets
VR56464 Sprocket 23 Teeth (10 Bolt Hole) 855D,E, 850G
VR56464V Sprocket 23 Teeth (10 Bolt Hole) 855D,E, 850G (Optional)
VR56535 Sprocket 23 Teeth (12 Bolt Hole) 850E LGP, 850G LGP
VR56535V Sprocket 23 Teeth (12 Bolt Hole) 850E LGP, 850G LGP (Optional)
VR56508 Sprocket 23 Teeth C850D/E-Relief Sprocket
Idlers
VCA620 103384A1 Front Idler Group Complete (R55677) (850, 850B, 850C, 855C, 850D, 850G)
VCA620V Front Idler Group Complete (Optional) (850, 850B, 850C, 855C, 850D, 850G)
Page 29
MODEL: CASE 650K, 750H, 750K, 850G, 850H, 850K
Specs Track Pitch = 6.75", Link Ht. = 96mm, Bushing O.D.=
57 mm, Bolt Hole= 5/8"
650K: (38L) 12-Bottom Rollers, 2-Carrier Roller
750H: (38L) 12 S/F Bottom Roller, 2 Carrer Roller
750K: (39L) 12 S/F Bottom Roller, 2 - Carrier Roller
850G: (38L) 8-S/F Roller, 4-D/F Roller, 2-Carrier Roller
850H: (38L) 8-S/F Roller, 4-D/F Roller, 2-Carrier Roller
850K: (40L) 8-S/F Roller, 4-D/F Roller, 2-Carrier Roller

V300212A1 Track Chain, 38L, Sealed, w/ Master Pin (Second Type)
V300212A1V Track Chain, 38L, Sealed, w/ Master Pin (Second Type) (Optional)
407015A1 Track Chain, 40L, Sealed, w/ Master Pin (Second Type)
Your Track Groups
VR56517 Bushing
VCR3196 R49792 Pin
VCR2562 R50211 Seal Washer
VR50210 Spacer
V295202A1
V29 202A1 Chain,
Ch i 38L, SALT, w// SML
38L SALT SML, 5/8" Bolt
/8" B l HHole (Second
l (S dTType))
V295202A1V Chain, 38L, SALT, w/ SML, 5/8" Bolt Hole (Second Type) (Optional)
V407018A1 Chain, 40L, SALT, w/ SML, 5/8" Bolt Hole (Second Type)
V235239A1 Track Group, 38L, SALT, w/ SML, w/ 1 B 18" Shoe
V235239A1V Track Group, 38L, SALT, w/ SML, w/ 1 B 18" Shoe (Optional)
Your Track Groups
VR56024 Pin & Bushing Group 38L Sealed and Lubricated
V295169A1 Master Link, L.H.
V295170A1 Master Link, R.H.
V295178A1 Link, R.H.
V295177A1 Link, L.H.
VR56515 Bushing
VCR3573 R51131 Pin
VCR3433 R50441 Plug w/Stopper
Track Hardware
V7H3597 Track Bolt, 5/8"
V1M1408 Track Nut, 5/8"
V295325A1 295325A1 Master Bolt (4-Required 5/8X82.5mm)
Track Shoes
V295181A1 295181A1 Shoe, w/ 1 B 18"
V295181A1V 295181A1 Shoe, w/ 1 B 18" (Optional)
V328940A1 328940A1 Shoe, w/ 1 B 16" w/ Mud Hole
V303471A1V 303471A1 Shoe, w/ 1 B 18" w/ Mud Hole (Optional)
Page 30
V295182A1 295182A1 Shoe, w/ 1 B 24"
V295183A1 295183A1 Shoe, w/ 1 B 28"
Bottom Rollers
VCA378 Roller Assembly S/F (650K)
VCA378V Roller Assembly S/F (650K) (Optional)
Carrier Rollers
Sprockets
VR56464 Sprocket 23 Teeth (10 Bolt Hole) 750H, 850G,H
VR56464V Sprocket 23 Teeth (10 Bolt Hole) 750H, 850G ,H (Optional)
VR56535 Sprocket 23 Teeth (12 Bolt Hole) 750H, 850G, H LGP Models
VR56535V Sprocket 23 Teeth (12 Bolt Hole) 750H, 850G, H LGP Models (Optional)
412164A1 Sprocket 25 Teeth (10 Bolt Hole) 650K, 750K, 850K
412061A1 Sprocket 25 Teeth (10 Bolt Hole) 650K, 750K, 850K Wide Track
Idlers
VCA620 103384A1 Front Idler Group Complete (R55677)
VCA620V Front Idler Group Complete (Optional)
089
V4B0897 ate (4-Required
Plate ( equ ed pe d e group)
per idler g oup)
427241A1 Idler Group (For 650K Models)
419395A1 Idler Group (For 750K, 850K Models)
Page 31
MODEL: CASE 1150B, 1150C, 1150D,1150D-LGP,1150E,
1150E-LGP,1155D, 1155E, 1150G, 1150H
Specs Track Pitch = 6.687" , Link Ht.= 101.6mm, Bushing

O.D.= 55.6mm Bolt Hole = 5/8"
Serial Nos: 1150B:(40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150C:(40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150D First Type:(40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150D Second Type:(40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150D LGP 1st Type:(43L) 6-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150D LGP 2nd Type:(43L) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
1150E:(40L)
1150E-LT: (43L) 6-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150E LGP: (43L) 6-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1155D 1st Type: (40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1155D 2nd Type: (40LK) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1155E: (40L) 4-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
1150G-LT: (43L) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
1150G-LGP: (43L) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
1150H: (43L) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
1150H CELT Track: (42L) 6.91" pitch link assembly - OEM ONLY
Sealed Chains and Track Groups Case 1150B

VCA380/40 Chain, 40L, Sealed, w/ Master Pin (1150B ONLY) Note: Can Use CA706/40 Track Chains
VCA404/40/16 Track Group, 40L, Sealed, w/Master Pin, w/3 B 16" Shoe Note:Can Use CA719/40/16 TGA
Your Track Groups
VCA381/40 Pin and Bushing Group, 40L (Bushing O.D. 2.187") (1150B)
VCA401 Master Pin Complete, 1150B, 1150C
VCA393 Link R.H.
VCA394 Link L.H.
VCA395 Pin
VCA396 Bushing
VKM70 Seal Washer
VCA706/40 Chain, 40L, Sealed, w/ Master Pin (Bushing O.D. = 58.7mm)
VCA706/43 R56724 Chain, 43L, Sealed, w/ Master Pin (Bushing O.D. = 58.7mm)
VCA716/40/22 Track Group, 40L, Sealed, w/,Master Pin, w/ 1 B 22" Shoe
Page 32
Your Track Groups
VLS1150DRY Link Segment
VCR2166 Seal Washer (R51201)
VCR255 Sealed Track Pin (1.437" O.D. - 104.5mm)
VCA717 Bushing (2.312" O.D. - 58.77 mm)
VCA707/40 Pin and Bushing Group, 40L (Bushing O.D. 2.312")-1150D
VCA681/40 Chain, 40L, SALT, w/ SML (Bushing O.D. = 58.7mm)
VCA681/40V Chain, 40L, SALT, w/ SML (Bushing O.D. = 58.7mm) (Optional)
VCA681/43V Chain, 43L, SALT, w/ SML (Bushing O.D. = 58.7mm) (Optional)
VCA680/40/16V Track Group
Group, 40L
40L, SALT
SALT, w/ SML,
SML w/ 3 B 1616" Shoe (Optional)
Your Track Groups
VCA684 Track Link R.H. (4.109" Height - 104.5mm)
VCA685 Track Link L.H. (4.109" Height - 104.5mm)
VCR3585 Salt Pin (1.437" O.D. - 36.512mm) (R51192)
VCA688 Bushing (2.312" O.D. - 58.77mm)
VCR3433 Plug Assembly (R50441)
VCA686 Master Link Complete R.H. (2 pieces)
VCA687 Master Link Complete L.H. (2 pieces)
VCA683/40 Bushing Group, 40L
Track Hardware
V9G3110 R27166 Track Bolt (5/8" x 2 1/4")
V1M1408 R25688 Track Nut (5/8")
V3P2274 Master Link Bolt (5/8" x 89 mm) (2 needed)
V9G8592 Master Link Bolt (5/8" x 82 mm) (2 needed)
Track Shoes
Page 33
VCA728/16 Track Shoe, w/ 2 B 16" w/o Mud Hole
Bottom Rollers
VCA382 R33571 Roller Assembly, SF
VCA382V R33571 Roller Assembly, SF (Optional)
VCA383 R33572 Roller Assembly, DF
VCA383V R33572 Roller Assembly, DF (Optional)
VPC358 Seal Group
Carrier Rollers
VCA423 241263A1 Carrier Roller Assembly
VCA423V 241263A1 Carrier Roller Assembly (Optional)
V662590C91 R39273 Seal Group
Sprockets
VCA689 R53118 Sprocket - 29 Tooth, 12 Bolt Hole (For Models 1150B/C, 1150D First & Second Type, 1150D-
LGP First Type, 1150E-LT, 1150G-LT, 1155D First & Second Type, 1155E, 1150E) Hub
thickness = 20.3mm. For 1150D-LGP & 1150G-LT Model, measure hub thickness to
insure correct sprocket
VCA689V Sprocket 29 Tooth 12 Bolt (Optional)
VR53119 Sprocket (For 1150D-LGP Second Type, 1150E-LGP, 1150G-LGP) 12 Bolt hole 29 Tooth
Hub Thickness = 45.7. For 1150D-LGP & 1150G-LT Models measure hub thickness to
insure correct sprocket
VR53119V Sprocket 29 Tooth 12 Bolt (Optional)
V1D4609 R27242 Bolt - (Except LGP) 3/4" x 3"
Bolt - (LGP) 3/4" x 4 1/4"
V2S0115 Flat Washer
V3/4 Nut
Idlers
VCA757 366245A1 Front Idler Group Complete (1150B
(1150B, 1150C
1150C, 1150D/E/1155D/E
1150D/E/1155D/E, 1150G,
1150G 1150H) - R52666
VCA757V 366245A1 Front Idler Group Complete (Optional) - R52666
V9W7220 Seal Group
VCA757K Idler Update Kit (See components listed below)
V0S1588 Bolt (3/8 x 1.1/4 NC) (4-Required per idler group)
VR58620 Plate (4-Required per idler group)
R40782 Wear Bar (Not Included in kit, OEM Only)
R35691 Shim, Wear Bar (Not Included in kit, OEM Only)
Page 34
MODEL: CASE 1450, 1450B, 1450BLGP,1455B, 1550,
1550LGP
O.D.= 66.48mm Bolt Diameter = 3/4"
Serial Nos: 1450:(36L)
1450B:(36L) 6-S/F, 6-D/F, 2-T/C Roller
1450BLGP:(39L) 6-S/F, 8-D/F, 4-T/C Roller
1455B:(36L)
1550: (36L) 12-Bottom Rollers, 2-Carrier Rollers
1550-LT: (39L) 14-Bottom Rollers, 4-Carrier Rollers
1550-LGP: (39L) 14-Bottom Rollers, 4-Carrier Rollers

VCA538/36/20 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 20" Shoe ESS
Your Track Groups
VCA484/36 Pin and Bushing Group, 36L-Master Pin Type
VCA484/39 Pin and Bushing Group, 39L-Master Pin Type
VCR1783 Sealed Pin
VCA495 Bushing
VCR1632 Spacer
VCR1630 Seal Washer
Sealed w/SML Chains and Track Groups
VCA575/36 Chain, 36L, Sealed, w/ SML (Bushing O.D. = 2.617")
VCA575/39 Chain, 39L, Sealed, w/ SML (Bushing O.D. = 2.617")
VCA610/36/18 Track Group, 36L, Sealed, w/ SML, w/ 1 B 18" Shoe
VCA611/36/20 Track Group, 36L, Sealed, w/ SML, w/ 1 B 20" Shoe ESS
VCA611/39/20 Track Group, 39L, Sealed, w/ SML, w/ 1 B 20" Shoe ESS
Your Track Groups
VCR1783 Sealed Pin
VCA495 Bushing
VCR1630 Seal Washer
VCR3317 Master Link Complete R.H..
VCR3318 Master Link Complete L.H..
Page 35
VCA618/36 Pin and Bushing Group, 36L-Split Master Link Type
VCA615/36/20 Track Group, 36L, SALT, w/ SML, w/ 1 B 20" Shoe ESS
Your Track Groups
VCR3319 SALT Pin (1.75" O.D. - 44.45mm) (R50438)
VCA569 Bushing (2.75" O.D. - 69.8mm)
VCR3433 Plug (R50441)
Track Hardware
V1S1859 Track Bolt (3/4" x 2 1/16")
V1S1860 Track Nut
V9S1838 Master
M t Link
Li k BBolt
lt
Track Shoes
VCA585/18 Track Shoe, Master, w/ 1 B 18"
VCA585/24V Track Shoe, Master, w/ 1 B 24" (Optional)
VCA537/20 Track Shoe, w/ 1 B 20", ESS
VCA607/20 Track Shoe, Master, w/ 1 B 20" ESS
Bottom Rollers
VCA486 R58435 Roller Assembly, SF **(For 1450, 1450B, 1450BLGP, 1455B, 1550, 1550LGP)**
VCA486V R58435 Roller Assembly, SF **(For 1450, 1450B, 1450BLGP, 1455B, 1550, 1550LGP)** (Optional)
VCA487 R58436 Roller Assembly, DF
VCA487V R58436 Roller Assembly, DF (Optional)
Carrier Rollers
VCA520 R33608 Carrier Roller Assembly **(For 1450B, 1450BLGP, 1455BLGP)**
Sprockets
Page 36
VCA488 R52262 Sprocket, Bolt on - 25 tooth (For 1450, 1450B) (0.984 Thick Hub)
V1D4609 Bolt, Sprocket-3"
V3/4 Nut
VCA619 R52261 Sprocket, Bolt on - 25 tooth (1455B Loader & 1450B LGP Dozer Only) (1.812 Thick Hub)
V0S1756 Bolt, Sprocket-4"
V3/4 Nut
VCA541 Segment Group (5 pieces - 25 teeth)**For Dozer only**(1450B, 1550, 1550-LT, 1550-LGP)
Idlers
VCA530 R58832 Front Idler Group Complete (R46700)**(For 1450, 1450B, 1450LGP, 1550)
VCA757K Idler Update Kit
Page 37
MODEL: CASE 1650K-XLT, LGP
Specs Pitch = 176mm, Link Ht = 106mm, Bushing OD = 57
mm, Bolt Diameter = 18mm
Serial Nos: 1650K XLT: (48L) 16-Bottom Rollers, 4-Carrier Rollers
1650K LGP: (48L) 16-Bottom Rollers, 4-Carrier Rollers
Lubricated Chains
VFT2280/48 76069523 Chain, 48L, SALT, w/ SML
Your Track Groups
VFT2309 Link, RH
VFT2310 Link, LH
VFT1967 Track Pin
VFT2327 Track Bushing
Track Hardware
V79039443 Track Bolt 18mm X 55 Washer Head
V74982325 Track Nut 18mm
Track Shoes
VFT2284/500 76029769 Track Shoe, w/ 1 B 20"
VFT2285/500 76029770 Track Shoe, Master, w/ 1 B 20"
VFT2284/550 79039480 Track Shoe, w/ 1 B 22"
VFT2284/800 76069524 Track Shoe, w/ 1 B 32"
Bottom Rollers
VFT1910 76004826 Roller Assembly S/F
VFT1910V 76004826 Roller Assembly S/F (Optional)
VFT1911 76004825 Roller Assembly D/F
VFT1911V 76004825 Roller Assembly D/F (Optional)
Carrier Rollers
VFT1640 76041361 Carrier Rollers
VFT949 Seal Group
Idlers
VFT1449 Idler Shell
Sprockets
VFT2958 79107146 Segment Group
Page 38
MODEL: CASE 1850K-LT, 1850X-LT/LGP
Specs Pitch = 8", Link Ht = 128 mm, Bushing OD = 72.9 mm,
Bolt Diameter = 3/4"
Serial Nos: 1850K-LT: (40L) 14-Bottom Rollers, 4-Carrier Rollers
1850X-LT: (45L) 16-Bottom Rollers, 4-Carrier Rollers
1850X-LGP: (45L) 16-Bottom Rollers, 4-Carrier Rollers
Lubricated Chains
VCR4267/40V Chain, 40L, SALT, w/ SML (Optional)
VCR4267/45V Chain, 45L, SALT, w/ SML (Optional) (Use VCR4267/43V & extend with VCR4267V links)
Your Track Groups
VCR5473/39 Pin & Bushing Group 39 L (For Bushing Diameter 72.7mm)
VCR3313/36 Pin and Bushing Group, 36 L (Use When Replacing Pins and Bushings on CR4267 Chains)
VCR3649/36 Bushing Group, 36 L
VD6CSMLPIN Joining Pin for Split Master Link (Extra)
VCR3319 Salt Pin
VCR3321 Ring
C 39
VCR3971 Sea sse b y
Seal Assembly
Track Hardware
V1S1859 Track Shoe Bolt, 3/4"
V1S1860 Track Shoe Nut, 3/4"
Track Shoes
VCR2084/22 Track Shoe, w/ 1 B 22"
VCR2084/22V Track Shoe, w/ 1 B 22" (Optional)
VCR3323/22 Track Shoe, Master, w/ 1 B 22"
VCR3323/22V Track Shoe, Master, w/ 1 B 22" (Optional)
VCR3323/24 Track Shoe, Master, w/ 1 B 24"
VCR3323/24V Track Shoe, Master, w/ 1 B 24" (Optional)
Bottom Rollers
VCR3634 Roller Assembly, S/F (3/4" bracket bolt hole)
VCR3634V Roller Assembly, S/F (3/4" bracket bolt hole) (Optional)
VCR3635 Roller Assembly, D/F (3/4" bracket bolt hole)
VCR3635V Roller Assembly, D/F (3/4" bracket bolt hole) (Optional)
VCR1797 Roller Shell, S/F
VCR1798 Roller Shell, D/F
V9W6647 Seal Group
VCR3636 Shaft
V8S5349 Bushing
VCR1656 Key
New Style Series III Bottom Roller
VCR6088 120-5746 Roller Assembly S/F Series III Note: These rollers have collars
VCR3088V Roller Assembly S/F Series III Note: These rollers have collars (Optional)
VCR6089 120-5766 Roller Assembly D/F Series III Note: These rollers have collars
Page 39
VCR6089V Roller Assembly D/F Series III Note: These rollers have collars (Optional)
V1D4608 Mounting Bolt For 1205746X & 1205766X (3/4 X 2.75)
V5H1504 Mounting Washer For 1205746X & 1205766X (20mm)
Carrier Rollers
VCR4800 Carrier Roller Assembly
VCR4800V Carrier Roller Assembly (Optional)
Sprockets
VFT4004 Segment Group
Page 40
MODEL: CASE CX75 SR, CX80 SR
Specs 154mm Pitch, Link Height =74mm, Bushing Diameter
OD = 46.2mm & 14mm Bolt Diameter
Serial Nos: CX75 SR: (39L)
CX80 SR: (39L)

VKM3041/39HD KAA1174 Chain, 39L, Sealed & Greased, w/ Master Pin
VKM3041/39HDV Chain, 39L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VKM1686HD Link Segment
VKM3041HDV Link Segment (V-Track)
VD1506300N00 Master Pin Complete
VKM3047HDV Master Pin Group (V-Track "T" Headed)
VKM946HD Seal Polyurethane
Track Hardware
V4378884 Track Bolt 14mm X 39mm (Confirm Bolt Length)
V203.32.21210 Track Bolt 14mm X 50mm (Confirm Bolt Length)
V9691/03 Track Nut 14mm
Track Shoes
VKM1685/450 Track Shoe, w/ 3 B 450mm
VKM1685/450V Track Shoe, w/ 3 B 450mm (Optional)
VAT183364 Track Shoe, w/ 3 B 600mm
Bottom Rollers
KAA1160 Roller
R ll A Assembly,
bl S/F
Carrier Rollers
KAA1182 Carrier Rollers
Idlers
KAA1154 Idler Group
Page 41
MODEL: CASE 588CK, 688B, 688CK, 788CK, 788LC,
888CEB, 888CKB, 988CK, 988CKE
Specs 6.75" pitch, Link Height = 94.5mm, Track Bushing
O.D. =50.6mm & 5/8" Bolt Diameter
Serial Nos: 588CK: (44L) 14-Bottom Rollers, 2-Carrier Rollers
688B: (44L)
688CK: (44L) 14-Bottom Rollers, 2-Carrier Rollers
788CK: (44L) 14-Bottom Rollers, 2-Carrier Rollers
788LC: (47L) 16-Bottom Rollers, 2-Carrier Rollers
888CEB: (47L) 16-Bottom Rollers, 2- Carrier Rollers
888CKB: (47L) 16-Bottom Rollers, 2- Carrier Rollers
988CK: (47L) 16- Bottom Rollers, 2-Carrier Rollers
988CKE: (47L) 16- Bottom Rollers, 2-Carrier Rollers
Unsealed Chains
VCR4854/44F P2342377M Chain, 44L, Unsealed, w/ Master Pin
Your Track Groups
VT75427HD Track Link, L.H..
VT75426HD Track Link, R.H..
VCR4876/47 Pin and Bushing Group, 47L Unsealed
VT55263HD Track Pin
VT43878HD Master Pin
VD3206301N00 Master Pin Group
VCR3197HD Spacer
D3206001N23 Track Bushing
D3206001N27 Master Bushing
Track Hardware
V1M1408 Track Shoe Nut, 5/8"
Track Shoes
VCR3248/20 N2442359 Track Shoe, w/ 3 B 20" w/ Mud Hole
VCR3248/20V N2442359 Track Shoe, w/ 3 B 20" w/ Mud Hole (Optional)
Bottom Rollers
VV2442343 V2442343 Roller Assembly, S/F
F2242344 Roller Assembly, S/F (For 788LC, 888, 988 Models)
Carrier Rollers
VC26141B0Y00 Carrier Rollers
Idlers
VG2242322 G2242322 Idler Group
B2242317 Idler Group (For 788CK Model)
F2242321 Idler Group (For 888, 988 Models)
Page 42
MODEL: CASE 880B, LC, 880C, LC, 880D
Serial Nos: 880B: (46L) 12-Bottom Rollers, 4-Carrier Rollers
880BLC: (50L) 14-Bottom Rollers, 4-Carrier Rollers
880C: (46L) 12-Bottom Rollers, 4-Carrier Rollers
880CLC: (50L) 14-Bottom Rollers, 4-Carrier Rollers
880D: (50L) 14-Bottom Rollers, 4-Carrier Rollers
Sealed Chains
VCA695/46 R43167 Chain, 46L, Sealed, w/ Master Pin
VCA695/50 N9918 Chain, 50L, Sealed, w/ Master Pin
Your Track Groups
Track Hardware
VR15309 Track Shoe Bolt, 9/16 X 1.15/16
V616200C1 Track Shoe Nut, 9/16"
Track Shoes
VCA196//15 Track Shoe, w/ 3 B 15" w/ Mud Hole
VCA196/24 Track Shoe, w/ 3 B 24",w/ Mud Hole
Bottom Rollers
VCA167 R56593 Roller Assembly S/F
VCA167V Roller Assembly S/F (Optional)
Carrier Rollers
VCA349 R33965 Carrier Roller
Page 43
Specs 6.750" pitch, link height = 94.5mm, Bushing OD = 50.8
mm, Bolt Diameter = 5/8"
Serial Nos: 1080: (47L) 16-Bottom Rollers, 4-Carrier Rollers
1080B: (49L) 16-Bottom Rollers, 4-Carrier Rollers
Unsealed Chains
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Track Hardware
V7H3597 Track Bolt, 5/8 X 2.1/8
Track Shoes
VCR3248/18 Track
T k Shoe,
Sh w// 3 B 460mm
460
VCR3248/20 Track Shoe, w/ 3 B 500mm
VCR3248/20V Track Shoe, w/ 3 B 500mm (Optional)
VCR3600/24M Track Shoe, w/ 2 B 600mm w/ Mud Hole
VCR3600/26 Track Shoe, w/ 2 B 660mm w/o Mud Hole
Bottom Rollers
VPC377 S243774 Roller Assembly S/F
VPC377V Roller Assembly S/F (Optional)
Carrier Rollers
VCR2880 S233033 Carrier Roller
VCR2880V Carrier Roller (Optional)
Sprockets
VVA453 Sprocket Rim (For Case 1080 Only)
S956758 Sprocket (For Case 1080B)
Idlers
S516386 Idler Group
Page 44
MODEL: CASE 9010, 9010B, CX130
Serial Nos: 9010: (44L)
9010B: (44L) 12-Bottom Rollers, 4-Carrier Roller
CX130: (43L) 14-Bottom Rollers, 2-Carrier Roller
Unsealed Chains
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
**Note: Current Sealed & Greased Track Chains Produced With " M" Type Seals
VCR4854/43HD Chain, 43L, Sealed & Greased, w/ Master Pin
VCR4854/43HDV Chain, 43L, Sealed & Greased
Chain 43L Greased, w/ Master Pin (Optional)
VCR4854/44HD 161070A1 Chain, 44L, Sealed & Greased, w/ Master Pin
VCR4854/44HDV 161070A1 Chain, 44L, Sealed & Greased, w/ Master Pin (Optional)
VCR4855/4320H Track Group, 43L, Sealed & Greased, w/ Master Pin, w/ 3 B 20" Shoe
VCR48554320HV Track Group, 43L, Sealed & Greased, w/ Master Pin, w/ 3 B 20" Shoe (Optional)
Your Track Groups
VCR4854HDM Link Segment (For "M" Type Seal)
VCR4876/47HD Pin and Bushing Group, 47L With "M" Type Seal
VT55263HD Track Pin
VCR1620HDM Master Pin Group With Master Seal (Used With New Style Chains With "M" Seal)
VCR4875HDV Master Pin Group (V-Track "T" Headed)
V082931 Track Bushing
D76100B0N42 Seal Assembly "M" Type
D76100B0N43 Spacer (For New Style Chains With "M" Type Seal)
Page 45
Components For Old Style Sealed & Greased Chains
VLS690BDRHD Link Segment (For Old Style Chains With Standard Polyurethane Seal)
VT55263HD Track Pin
VCR1620HD Master Pin Group With Spacer (Used With Old Style Chains With Standard Poly Seal)
VT39977HD Seal Assembly Polyurethane
VCR3197HD Spacer (For Old Style Chains With Polyurethane Seal)
VT55261HD Bushing (For Old Style Chains With Standard Poly Seal)
VT55262HD Master Bushing (For Old Style Chains With Standard Poly Seal)
Track Hardware
V7H3597 Track Bolt, 5/8 X 2.1/8
Track Shoes
Bottom Rollers
/
N/A LK42 Oute a ge Roller
Outer Flange o e ((For
o Case 90 0O
9010 y)
Only)
N/A LK47 Inner Flange Roller (For Case 9010 Only)
VPC377 Roller Assembly S/F Note: Can use only if replacing complete set For 9010 Models)
VPC377V Roller Assembly S/F (Optional) Note: Use only if replacing complete set For 9010 Models)
87015549 Roller Bolt (16mm X 95mm) (Use for 9010 Model when replacing with all PC377 Rollers)
160764A1 Outer Flange Roller (For Case 9010B Only)
160765A1 Inner Flange Roller (For Case 9010B Only)
KNA0693 Roller Assembly (For CX130 Model)
Carrier Rollers
VLK31 161707A1 Carrier Roller Assembly (For Case 9010 Model Only)
VLK31V Carrier Roller (Optional) (Can Use VKTA1251V)
161705A1 Carrier Roller (For CX130 Model)
Sprockets
VKNA0323V 150866A1 Sprocket (Serial Number up to 713101)
N/A KNA0826 Sprocket (Serial Number 713102 and up)
Idlers
VKNA0540V 166097A1 Idler Group - Serial Number Up to 713101
VKNA1265 KNA1265 Idler Group - Serial Number 713102 & Up (CX130 SER # 131 - UP)
Page 46
MODEL: CASE 9020
Specs Pitch = 6.906", Link Ht = 103.2 mm, Bushing OD =
58.738 mm , Bolt Diameter = 18mm
UnSealed Chains
VHT17/47 Chain, 47L, Sealed, w/ Master Pin
Your Track Groups
VCR4798/53 Pin and Bushing Group, 48 L
VLSE180DRY Link Segment
VHT19 Track Link, L.H..
VHT18 Track Link, R.H..
VCR4795 Sealed Pin
VCR2163TH Sealed Bushing
VCR2166 Seal Washer
Track Shoes
VHT20/600 Track Shoe, w/ 3 B 600mm
VHT20/700 2022495 Track Shoe, w/ 3 B 700mm
V99A85 Track Shoe, w/ 2 B 600mm w/ Mud Hole
VZZ1052A0N700 Track Shoe, w/ 2 B 700mm w/ Mud Hole
Bottom Rollers
VLK29V 152170A1 Outer Flange Roller Assembly, S/F-Excavator Style
VLK30V 152181A1 Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
VLK31 161707A1 Carrier Roller Assembly (For Case 9010 Model Only)
Sprockets
V150051A1 150051A1 Sprockets 21-Tooth, 22-Bolt Hole
Idlers
VPV128400Y00 KRA0946 Idler with bracket
VKRA0946V KRA0946 Idler with bracket (Optional)
Page 47
MODEL: CASE 9020B, CX160, CX210, CX225, CX240
Specs Track Pitch = 7.48", Link Ht.= 106mm, Bushing O.D.
58.7mm, Bolt Hole = 20mm
CX160: (43L)
CX210: (49L) 16-Bottom Rollers, 4-Carrier Rollers
CX225: (49L)
CX240: (51L) 16-Bottom Rollers, 4-Carrier Rollers
Sealed Chains
VCR5350/43 161297A1 Chain, 43L, Sealed, w/ Master Pin
VCR5350/49 Chain, 49L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Sealed
S l d & Greased
G d Chains
Ch i
VCR5350/43HDV Chain, 43L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VPBGE200DHD Pin and Bushing Group, 49L
VLSE200DHD Link Segment
VCR5092HD Track Link, R.H.
VCR5091HD Track Link, L.H.
VCR4795HD Sealed Pin
VCR2163HD Sealed Bushing
VCR5094HD Sealed Master Bushing
V6Y8185HD Sealed Master Pin
VCR4797HD Master Pin Group
VCR2166HD Seal Washer-Polyurethane
VCR5096HD Spacer
Track Hardware
V9W3619 Track Shoe Bolt, 20mm
V79035816 Track Nut (20mm Square)
Track Shoes
V99P11 1060614 Track Shoe, w/ 1 B 600mm, w/ CC w/o Mud Hole
VZ1621100N700 Track Shoe, w/ 1 B 700mm, w/ CC/Mud Hole
VCR5439/700 Track Shoe, w/ 2 B 700mm, w/ Mud Hole)
VCR5015/500 Track Shoe, w/ 3 B 500mm, ESS
Page 48
VCR5360/500 Track Shoe, w/ 3 B 500mm, w/ Mud Hole
VCR5360/24V Track Shoe, w/ 3 B 24", w/ Mud Hole (Optional)
VCR5360/700 6I9454 Track Shoe, w/ 3 B 700mm, w/ Mud Hole
VCR5360/700V 6I9454 Track Shoe, w/ 3 B 700mm, w/ Mud Hole (Optional)
VCR5360/28V 6I9454 Track Shoe, w/ 3 B 28", w/ Mud Hole (Optional)
VCR5360/800 9W9351 Track Shoe, w/ 3 B 800mm, w/ Mud Hole
VCR5360/800V 9W9351 Track Shoe, w/ 3 B 800mm, w/ Mud Hole (Optional)
VCR5360/32V 9W9351 Track Shoe, w/ 3 B 32", w/ Mud Hole (Optional)
Bottom Rollers
VLK29V 152170A1 Outer Flange Roller Assembly, S/F-Excavator Style (For 9020B Models)
VLK30V 152181A1 Inner Flange Roller Assembly, S/F-Excavator Style
VKRA1189V 160417A1 Outer Flange Roller Assembly, S/F-Excavator Style (For CX160, CX210, CX225, CX240)
Carrier Rollers
VLK31 161707A1 Carrier Roller Assembly
Sprockets
VKLA0083V 161299A1 Sprocket 21-Tooth, 21-Bolt Hole (For 9020B Model)
VCR5606V KLA0158 Sprocket 21-Tooth, 22-Bolt Hole (For CX160 Model)
VLK105V 165181A1 Sprocket 21-Tooth, 22-Bolt Hole (For CX210, CX225, CX240 Models)
Idlers
VKRA1198V 160424A1 Idler Group (For 9020B Models)
8 00 00
VPV128400Y00 66099
166099A1 de G
Idler oup ((For
Group o C 60, C
CX160, 0, C
CX210, 5, C
CX225, 0 Models)
CX240 ode s)
VKRA0946V 166099A1 Idler Group (For CX160, CX210, CX225, CX240 Models) (Optional)
Page 49
MODEL: CASE 9030
Sealed Chains
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Track Hardware
V74982325 Track Nut 18 mm
Track Shoes
VHT20/700 2022495 Track Shoe, w/ 3 B 700mm
V99A85 Track Shoe, w/ 2 B 600mm w/ Mud Hole
VZZ1052A0N700 Track Shoe, w/ 2 B 700mm w/ Mud Hole
Bottom Rollers
VLK29V 152170A1 Outer Flange Roller Assembly, S/F-Excavator Style (For 9020B Models)
Carrier Rollers
VLK31 161707A1 Carrier Roller
Sprockets
VKRA1078V Sprocket 23-Tooth, 22-Bolt Hole
Idlers
VPV128400Y00 152574A1 Idler Group
Page 50
MODEL: CASE 9030B, 9030B-LC
9030B-LC: (49L) 16-Bottom Rollers, 4-Carrier Rollers
Sealed Chains
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
VCR5350/49HDV Chain, 49L, S
Ch i 49L Sealed Greased,
l d&G d w// M
Master
t PiPin(Optional)
(O ti l)
Your Track Groups
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 51
Bottom Rollers
VKRA1189V 160417A1 Outer Flange Roller Assembly, S/F-Excavator Style
VKRA1190V 160418A1 Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
Sprockets
VLK105V Sprockets 21-Tooth, 22-Bolt Hole
Idlers
VKRA1198V 160424A1 Idler Group
Page 52
MODEL: CASE 9040
Specs 190mm Pitch, Link Height =105mm, Bushing
Diameter OD = 59mm & 20MM" Bolt Diameter
Note: Verify Link Casting Number Before Ordering Track Components.

Casting Number 4060B & D7622 Are Old Style Chains. Contact Your VPI
Representitive for parts availability For Older Style Chains
New Style Unsealed Chains

VKM782/52F 151529A1 Chain, 52L, Unsealed, w/ Master Pin
VKM782/52FV 151529A1 Chain, 52L, Unsealed, w/ Master Pin (Optional)
* New Style Chain Casting Number DY569, Verify Casting Number for Parts. *
Your Track Groups
VKM1149/47F Pin and Bushing Group, 47L Unsealed
VKM1031HD Track Link R.H.
VKM1031HDV Track Link R.H. (Optional)
VKM1032HD Track Link L.H.
VKM1032HDV Track Link L.H. (Optional)
VKM782F Link Segment (Consists of R.H Link, L.H Link, Pin, Bushing)
VKM1146HD Sealed Pin
VKM1146HDV Sealed Pin (Optional)
VKM68HD Sealed Bushing
VKM68HDV Sealed Bushing (Optional)
VKM1147HD Master Pin (1.5" X 8.75")
VKM1148F Master Pin Complete
VKM1148V Master Pin Complete (V-Track "T" Headed)
V031265 Spacer
VKM68F Track Bushing
VKM69HD Master Bushing
New Style Sealed & Greased Track Chains
VKM782/52HD Chain, 52L, Sealed and Greased, w/ Master Pin
VKM782/52HDV Chain, 52L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
VKM1149/47HD Pin and Bushing Group, 47L Sealed & Greased
VKM1148HD Master Pin Complete
Page 53
VKM70HDM Seal Washer
VKM71HDM Master Seal
Track Hardware
V79035814 Track Bolt, 20mm X 60mm (Use With Thick Track Shoes-Base Plate Thickness = 9-10mm)
V20Y.32.11210 Track Bolt, 20mm X 53mm (Use With Thin Track Shoes-Base Plate Thickness = 7-8mm)
V79035816 4067232 Track Nut SQ M20 (21 mm Thick)
V9691/06 Track Nut SQ M20 (25 mm Thick)
Track Shoes
VID1705/600 Track Shoe, 1 B 600mm, w/ CC/Mud Hole
VID1705/600V Track Shoe, 1 B 600mm, w/ CC/Mud Hole (Optional)
V99L60 Track Shoe, 1 B 710mm, w/ Mud Hole, w/o CC
VZV0202B0N610 Track Shoe, 2 B 600mm, w/o Mud Hole
V99E35 Track Shoe, 2 B 710mm, w/o Mud Hole
VKM1214/24 Track Shoe, 2 B 600mm, w/ CC/Mud Hole
V99L64 Track Shoe, 2 B 600mm, w/ Trapezoid Mud Hole
V2273-6080D1 Track Shoe, 2 B 610mm, w/ Mud Hole
V690E2BARSHO Track Shoe, 2 B 711mm, w/ Mud Hole
VKM783/600 Track Shoe, 3 B 600mm
VKM783/600V Track Shoe, 3 B 600mm (Optional)
Bottom Rollers
VKBA1047V 151131A1 Outer Flange Roller Assembly
VKBA1050V 151137A1 Inner Flange Roller Assembly
Carrier Rollers
VKBA0486 151264A1 Carrier Roller Assembly (Currently Not Available from VPI)
Sprockets
VKBA0425V 151112A1 Sprocket
Idlers
Page 54
MODEL: CASE 9040B
Sealed Chains
Your Track Groups
VCR4798/49 Pin and Bushing Group, 49 LK
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Sealed & Greased Track Chains
Your Track Groups
VPBGE200DHD Pin and Bushing Group, 49L Sealed
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 55
Bottom Rollers
VKBA1050V 159408A1 Inner Flange Roller Assembly
VKBA1047V 159407A1 Outer Flange Roller Assembly
Carrier Rollers
Sprockets
VLK105V Sprockets 21-Tooth, 22-Bolt Hole
Idlers
VKBA0877V 159413A1 Idler Group (Can Use VKRA0946V)
Page 56
MODEL: CASE 9045B, 9050, 9050B
Specs Track Pitch =203.20mm, Link Ht.= 117.6mm, Bushing
O.D. 66.65mm, Bolt Hole = 20mm
Serial Nos: 9045B: (50L)
9050: Up to 501121 (50L)
9050B: Up to 501121 (50L) 10 S/F, 8 D/F, 4 T/C
Note: Confirm bolt pattern on chains before ordering

VKTA0434 Chain, 50L, Sealed & Greased, w/ Master Pin
Your Track Groups
V081406 Link, R.H.
V081405 Link, L.H.
VDV158000N24 Track Pin
V081401 Master Pin
VCR1630HDM Seal Assembly "M" Style
VCR1632HDM Spacer
V083014 Master Bushing
Track Hardware
V080526 Track Shoe Bolt, 20mm X 62mm
Track Shoes
VZV158200N700 Track Shoe, 2 B 28"
V99I12 Track Shoe, 3 B 28"
V82619 Track Shoe, 3 B 32"
Bottom Rollers
VLK58 151865A1 Outer Flange Roller Assembly
VLK58V 151865A1 Outer Flange Roller Assembly (Optional)
VLK59 151871A1 Inner Flange Roller Assembly
VLK59V 151871A1 Inner Flange Roller Assembly (Optional)
Carrier Rollers
VLK60V 158745A1 Carrier Roller Assembly (Optional)
Sprockets
VLK107 151758A1 Sprocket
VLK107V 151758A1 Sprocket (Optional)
Idlers
VC8A0173 152179A1 Idler Group (For Case 9050, 9050B Model Only)
Page 57
MODEL: CASE 9050B
Serial Nos: 9050B: 501122-Up (50L)

VKTA0434 Chain, 50L, Sealed & Greased, w/ Master Pin
Your Track Groups
V081406 Link, R/H
V081405 Link, L/H
V081401 Master Pin
VCR1630HDM Seal Assembly Polyurethane "M" Type
VCR1632HDM Master Seal
Track Hardware
Track Shoes
VZV158200N700 Track Shoe, 2 B 28"
V99I12 Track Shoe, 3 B 28"
V82619 Track Shoe, 3 B 32"
Bottom
B tt Rollers
R ll
VLK58 151865A1 Outer Flange Roller Assembly
VLK58V 151865A1 Outer Flange Roller Assembly (Optional)
VLK59 151871A1 Inner Flange Roller Assembly
VLK59V 151871A1 Inner Flange Roller Assembly (Optional)
Carrier Rollers
VLK60V 158745A1 Carrier Roller Assembly (Optional)
Sprockets
VLK107 151758A1 Sprocket
VLK107V 151758A1 Sprocket (Optional)
Idlers
V173783A1 Idler With Brackets
Page 58
MODEL: CASE 9050 TK, 9050B TK
Specs Track Pitch = 8.5", Link Height = 126 mm, Bushing
O.D. 71.4mm, Bolt Diameter 7/8"
Serial Nos: 9050 TK: (49L)
9050B TK: (49L)
Unsealed Chains *Forestry Application*

VCR4235/49FY Chain, 49L, Unsealed, w/ Master Pin (I-Trac Design)
VCR4235/52FY Chain, 52L, Unsealed, w/ Master Pin (I-Trac Design)
Your Track Groups
V081397 Track Pin
V080505 Spacer
Note: New Style Sealed & Greased Chains Are Produced With Steel Seal Washers
VCR4235/49HD 162085A1 Chain, 49L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/49HDV 162085A1 Chain, 49L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1542TH Sealed Master Bushing
VAT170096 Pin and Bushing Group, 53 LK Sealed
VCR4248HD Track Link L.H..
VCR4247HD Track Link R.H..
VCR4730HD Master Pin Complete
V7640000N42 Seal Assembly Polyurethane
VCR1540HD Spacer
V7640000N11 Snap Ring
Track Hardware (7/8")
V2S2140 Track Nut Square 7/8"
Track Shoes
VZZ1071Z0N610 Track Shoe, w/ 1 B 24", w/ CC/MH
VCR4236/28M Track Shoe, w/ 2 B 28", w/ Mud Hole
VCR4701/28 Track Shoe, w/ 2 B 30", w/o Mud Hole
VCR4236/30V Track Shoe, w/ 2 B 30", w/o Mud Hole (Optional)
Page 59
Bottom Rollers
VKSA0835 162083A1 Roller Assembly S/F
Carrier Rollers
VKSA0835 162083A1 Roller Assembly S/F
Sprockets
VR14070B0Y01 162095A1 Sprocket 23-Tooth, 24-Bolt Hole
Idlers
162084A1 Idler Group
V173785A1 173785A1 Idler Group (For 9050B TK With S/N 531008- Up)
Page 60
9060B: Up to 601025 (51L) 18-Bottom Rollers, 4-Carrier Rollers
9060B: 601026- Up Note: Will Need To Confirm Track Chains

VCR4235/51HD 157565A1 Chain, 51L, Sealed & Greased, w/ Master Pin (9060 & 9060B Early S/N)
VCR4235/51HDV 157565A1 Chain, 51L, Sealed & Greased, w/ Master Pin (9060 & 9060B Early S/N) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VAT170096 Pin and Bushing Group, 53L Sealed
VCR4248HD Track Link L.H.
VCR4247HD Track Link R.H.
VCR1540HD Spacer
V7H3599 Track Bolt 7/8"
V2S2140 Track Nut 7/8" SQ
Track Shoes
Bottom Rollers
VKTA0674 170572A1 Inner Flange Roller
VKTA0674V 170572A1 Inner Flange Roller (Optional)
VKTA0673 170581A1 Outer Flange Roller
VKTA0673V 170581A1 Outer Flange Roller (Optional)
Page 61
Carrier Rollers
VLK60V 158745A1 Carrier Roller (Optional)
Sprockets
151434A1 Sprocket (For Case 9060 Only)
V171703A1 171703A1 Sprocket
VKTA1007V 171703A1 Sprocket (Optional)
Idlers
V171800A1 171800A1 Idler Group
Page 62
MODEL: CASE CX290, CX330
Specs 215.9mm Pitch, Link Height =129mm, Bushing
Diameter OD = 71.4mm & 24MM" Bolt Diameter
Serial Nos: CX290: (47L) 16-Bottom Rollers, 4-Carrier Rollers
CX330: (48L)

Note: Current ITM Production Uses "M" Type Seal For New Style Chains
VHT227/47HD KBA1146 Chain, 47L, Sealed and Greased, w/ Master Pin
VHT227/47HDV KBA1146 Chain, 47L, Sealed and Greased, w/ Master Pin (Optional)
VHT227/48HD KSA1166 Chain, 48L, Sealed and Greased, w/ Master Pin
VHT227/48HDV KSA1166 Chain, 48L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
VAT170096 Pin and Bushing Group, 53L
VAT201778 Track Link, L.H.
VAT201777 Track Link, R.H.
VCR1542HD Master Bushing
VCR1541HD Seal Polyurethane
VCR1541HDM Seal Polyurethane "M" Type (For New Style Chains)
VCR1540HD Spacer
VKM804HDM Master Seal ((For Master Pin On New Style
y Chains))
V7640000N11 Cotter Pin
Track Hardware 24mm Bolt Hole
V4295784 Track Shoe Bolt M24 x 81MM (Use with 22.5 mm Base Plate Shoe)
VD1640000N15 Track Shoe Bolt M24 x 74MM (Use with 17.5mm Base Plate Shoe)
V4328034 Track Shoe Bolt M24 x 72MM (Use with 16mm Base Plate Shoe)
V4328035 Track Shoe Nut M24 SQ (OEM TYPE)
VD1640000N17 Track Shoe Nut M24 SQ
V081653 Track Shoe Nut M24 HEX (Thinwall)
Track Shoes 24mm Bolt Hole
VKM2230/710 Track Shoe, 1 B 28", w/ CC/Mud Hole
VKM2230/28V Track Shoe, 1 B 28", w/ CC/Mud Hole (Optional)
V85194 Track Shoe, 1 B 30", w/ CC/Mud hole
V99D51 Track Shoe, 2 B 700mm, w/o Mud Hole
V99G15 Track Shoe, 2 B 762mm, w/o Mud Hole
V99A79 Track Shoe, 2 B 700mm, w/o Mud Hole
V99A80 Track Shoe, 2 B 762mm, w/ Mud Hole
VZV0402B0N914 Track Shoe, 2 B 914mm, w/ Mud Hole
Bottom Rollers
VKSA1068 Outer Flange Roller (24MM Mounting Bolt Diameter)
VKSA1068V Outer Flange Roller (24MM Mounting Bolt Diameter) (Optional)
Carrier Rollers
Page 63
KBA1141 Carrier Roller Assembly
Sprockets
V2404N431V KSA1061 Sprocket 21-Tooth, 26-Bolt Hole
Idlers
KSA1064 Idler Group
Page 64
MODEL: CASE CX800
Sealed Chains
VKM596/51 Chain, 51L, Sealed, w/ Master Pin
Your Track Groups
VKM596 Link Segment
VKM429 Track Link, L.H.
VKM430 Track Link, R.H.
VKM431 Track Pin
VKM428 Master Pin Complete
VKM432 Master Pin
VKM434 Master Bushing
Track Hardware **27mm**
V195.32.11210 Track Bolt 27mm X 82mm
V195.32.11221 Track Nut 27mm Square
Track Shoes ** 27 mm**
Bottom Rollers
Outer Flange Roller
Carrier Rollers
Carrier Roller Assembly
Sprockets
Sprocket 21-Tooth, 26-Bolt Hole
Idlers
Idler Group
Page 65
MODEL: CASE CX460
Specs Track Pitch = 9", Link Height = 126 mm, Bushing O.D.
71.4mm, Bolt Diameter 24mm

VLS62D00003F2 Chain, 50L, Sealed & Greased, w/ Master Pin
Your Track Groups
Track Hardware
VD1640000N15 Track Bolt 24mm X 74mm
VD1640000N17 Track Nut 24mm
Track Shoes
Bottom Rollers
VKTA1106V KTA1106 Outer Flange Roller
Carrier Rollers
KSA1145 Carrier Roller Assembly
Sprockets
VLS51D01001P1 KTA1069 Sprocket
Idlers
KTA1097 Idler Group
Page 66
MODEL: Caterpillar D2
Specs 6.125" pitch, link ht = 76.2mm, Bushing OD = 42.96
mm, 1/2" bolt hole
Serial Nos: D2: 3J1-Up, 5J1-Up, 4U1-6372 (30LK)
5U1-13236
D2: 4U6373-Up, 5U13237-Up (32LK)
Note: Original Machines had 7/16" Bolt Hole, Upgrade to 1/2" Bolt Hole
Unsealed Chains and Track Groups

VLH1/34 Chain, 34L, Unsealed, w/ Master Pin
Your Track Groups
VLH140 Track Link L.H.
VLH139 Track Link R.H.
VCR5104 6B5278 Track Pin
VCR306 6B5277 Track Bushing
VCR12 Master Bushing
VCR3551 Master Pin Group
VCR3550 Spacer
Track Hardware
V8H7504 Track Bolt 1/2" X 1.1/2"
V6S3419 Track Nut 1/2"
Sprockets
VCR3006 Sprocket
S k t Rim (Weld
Ri (W ld on)(25
)(25 Teeth)
T th) RReplaces
l CR962
VCR3006V Sprocket Rim (Weld on)(25 Teeth) Replaces CR962 (Optional)
Page 67
MODEL: Caterpillar D3, D3B, 931, 931B, 935B
Specs 6.125" pitch, link ht = 84mm, Bushing OD = 46.8 mm,
9/16 track shoe bolt hole
Serial Nos:
D3: 79U3041-Up (36 LK) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
D3 LGP: 6N539 -Up (39 LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
D3B: 23Y1-Up, 27Y1-Up (36 LK) 6-S/F Rollers, 4-D/F Rollers, 2-Carrier
Rollers
931: 78U2708 up, 81U1 up ( 36 LK)
931 LGP: 8N1 up, 10 N 1 up ( 36 LK)
931B: 25Y1-25Y1723, 29Y1-29Y-1284 ( 36 LK)
931B: 25Y1724 up, 29Y1285 up (37LK)
935B: 3DF (37LK)

VCR3657/36 6S8800 Chain, 36L, Sealed, w/ Master Pin
VCR3658/36/14 6S8830 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 14" Shoe
VCR3658/39/16 Track Group, 39L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe
Your Track Groups
Sealed SML Chains and Track Groups
VCR3689/36 6S9605 Use CR4749/36
VCR3689/37 Use CR4749/37
VCR3689/39 6S9686 Use CR4749/39
VCR3691/36/14 6S9610 Use CR4776/36/14
VCR3691/36/16 6S9611 Use CR4776/36/16
VCR3691/36/25 Use CR4776/36/25
VCR3692/36/14 6S9606 Use CR4775/36/14
VCR3691/37/16 Use CR4777/37/16
Your Track Groups
VLSD3DRY Link Segment
VCR2995/36 6S8408 Pin and Bushing Group, 36LK-Master Pin Type
VCR2995/39 Pin and Bushing Group, 39LK-Master Pin Type
VCR3693/36 Pin and Bushing Group, 36 LK-Split Master Link Type
VCR3615 Master Link Complete R.H. (2 pieces)
VCR3614 Master Link Complete L.H. (2 pieces)
VCR3015 6S8411 Master Pin Complete
VCR3653 6S8343 Track Link, R.H.
VCR3654 6S8344 Track Link, L.H.
VCR2678 6B5278 Sealed Pin
VCR3009 6S3178 Sealed Bushing
VCR3011 6S3179 Sealed Master Bushing
VCR3012 8L5560 Sealed Master Pin
VCR3013 6S3145 Spacer
VCR3014 6S3146 Seal Washer
VCR4749/36 6Y1711 Chain, 36L, Sealed, w/ SML
VCR4749/36V 6Y1711 Chain, 36L, Sealed, w/ SML (Optional)
Page 68
VCR4749/37 Chain, 37L, Sealed, w/ SML
VCR4749/37V Chain, 37L, Sealed, w/ SML (Optional)
VCR4776/36/16 Track Group 36LK Sealed w/SML 1B 16" Shoe
VCR4776/3916V Track Group 39LK Sealed w/SML 1B 16" Shoe (Optional)
Your Track Groups
VCR4750/36 Pin and Bushing Group, 36LK
VCR4771 6Y0935 Track Link R.H.
VCR4772 6Y0936 Track Link L.H.
VCR2678 Track Pin
VCR4998 Track Bushing
VCR3014 Seal Washer
VCR3616 6S9055 Pin, SALT
VCR3617 6S9051 Bushing, SALT (Bushing OD = 46.8 mm)
VCR3618 6S9049 Thrust Ring
VCR3619 6T4206 Track Seal
VCR3612/36 6S9066 Use CR4746/36
VCR3612/37 3T6705 Use CR4746/37
VCR3612/39 6S9067 UseCR4746/39
VCR3621/36/14 6S9096 Use CR4774/36/14
VCR3621/36/16 6S9095 Use CR4774/36/16
VCR3621/36/25 Use CR4774/36/25
VCR3621/39/16 9W9440 Use CR4774/39/16
VCR3621/39/25 Use CR4774/39/25
VCR3622/37/14 Use CR4775/37/14
Your Track Groups
VCR3677/36 6T3577 Bushing Group, 36LK
VCR3617 6S9051 Bushing, SALT (Bushing OD = 46.8 mm)
Lubricated Chains and Track Groups 50mm Bushing
VCR4774/36/14 6Y1344 Track Group, 36L, SALT, w/ SML, w/ 1 B 14" Shoe
VCR4774/3616V 6Y1670 Track Group, 36L, SALT, w/ SML, w/ 1 B 16" Shoe (Optional)
Page 69
VCR4774/37/18 Track Group, 37L, SALT, w/ SML, w/ 1 B 18" Shoe
VCR4774/3718V Track Group, 37L, SALT, w/ SML, w/ 1 B 18" Shoe (Optional)
Your Track Groups
VCR4748/36 Bushing Group, 36LK
VCR4773 6Y0650 Bushing
VCR1620 4K4078 p
Master Pin Complete-For Dryy Track Chain Onlyy
Track Shoes
VCR4583/14 6S8815 Shoe, 1 B 14" (6Y1328)
VCR4584/14 6S9057 Shoe, Master, 1 B 14" (6Y1329)
VCR4584/14V 6S9057 Shoe, Master, 1 B 14" (6Y1329) (Optional)
VCR4583/16 6S8817 Shoe, 1 B 16" (6Y1381)
VCR4583/16V 6S8817 Shoe, 1 B 16" (6Y1381) (Optional)
VCR4583/18 Shoe, 1 B 18"
VCR4584/18 Shoe, Master, 1 B 18"
VCR4584/18V Shoe, Master, 1 B 18" (Optional)
VCR4583/20 Shoe, 1 B 20"
VCR4583/25 6S8824 Shoe, 1 B 25" (6Y1385)
VCR3656/12 Shoe, 3 B 12" (with mud hole)
VCR3625/12 Shoe, Master, 3 B 12" (with mud hole)
VCR3656/14 6Y1596 Shoe, 3 B 14" (with mud hole)
VCR3656/14V 6Y1596 Shoe, 3 B 14" (with mud hole) (Optional)
VCR3625/14 6Y1597 Shoe, Master, 3 B 14" (with mud hole)
Track Hardware
V4K7038 4K7038 Track Shoe Bolt, 9/16"
V7K2017 7K2017 Track Shoe Nut, 9/16"
V5P4684 5P4684 Master Link Bolt
Bottom Rollers
Page 70
VCR3000 3T4352 Roller Assembly, S/F
VCR3000V 3T4352 Roller Assembly S/F (Optional)
VCR3001 3T4353 Roller Assembly, D/F
VCR3001V 3T4353 Roller Assembly D/F (Optional)
VCR3060 6S7038 Roller Shell, S/F
VCR3061 6S7040 Roller Shell, D/F
V9W7207 6S3285 Seal Group
V6Y4744 6S8233 Bushing
VCR3067 6S3284 Rubber Seal
V0S1585 OS1585 Roller Mounting Bolt (1/2" x 1 1/2")
V2M0849 2M0849 Hard Washer
Carrier Rollers
VCR3002 6S3609 Carrier Roller Assembly (Qty 2)
VCR3002V 6S3609 D3 TOP RLR GRP (6S3609) Optional
VCR3109 6S3691 Carrier Roller Shell
V9W7216 9W7216 Seal Group
Idlers
VCR3004 6S3277 Idler Complete
V9N4173WBV 106-9187 IDLER GRP D3 (CAST) W/Brackets(Optional) Adaptable for the bolt on counterweights
VCR3003 6S9367 Idler Shell
V6S3697 6S3697 Idler Shaft
V1H9696 1H9696 O-ring, Idler Shaft
V5M5000 5M5000 Lock, Idler Shaft
V0T0768 0T0768 Bolt, Idler Lock
V3B4507 3B4507 Lock washer, Idler Lock
V6S3286 6S3286 Shim, Idler Side Plate (32 or UAR)
Sprockets
VCR3006 6S7880 Sprocket Rim (Weld on)(25 Teeth)-D3, D3B, D3BLGP, 931, 931B, 931BLGP
VCR3006V 6S7880 Sprocket Rim (Optional)
VCR3005 6S8270 Sprocket (D3, D3B, D3BLGP 931, 931B, D31BLGP) (25 Teeth)
VCR4751 8Y0622 Sprocket (to convert from 46.8mm Bushing to 50mm Bushing)
VCR4752 6Y1244 Sprocket Rim (to convert from 46.8mm Bushing to 50mm Bushing)
VCR1445 1M6226 Sprocket Rim (933E,F,G)-For Repair Only
VCR1445V 1M6226 933 SPROCKET RIM (1M6226)
Track Frame Components
V6S3442 6S3442 Idler Wear Strip (4)
V904405 Track Adjuster Seal Kit (2)
Page 71
MODEL: Caterpillar D3C, D4C, D4C-XL, D3G, D4G
Specs 6.125" pitch, link height = 88mm, Bushing OD = 50
mm, & 9/16 track shoe bolt hole
Serial Nos: D3C: 23Y2508-UP (37LK) 6-S/F, 4-D/F, 2-T/C
27Y5050-UP (37LK) 6-S/F, 4-D/F, 2-T/C
2XF622-UP (37LK) 6-S/F, 4-D/F, 2-T/C
3RF0147-UP (36LK) 6-S/F, 4-D/F, 2-T/C
5KG (37LK)6-S/F, 4-D/F, 2-T/C
24Y2382-UP (39LK) 8-S/F, 4-D/F, 2-T/C
28Y1992-UP (39LK) 8-S/F, 4-D/F, 2-T/C
6PF0145-UP (39LK) 8-S/F, 4-D/F, 2-T/C
1PJ0138-UP (39LK) 8-S/F, 4-D/F, 2-T/C
7JF0122-UP (39LK) 8-S/F, 4-D/F, 2-T/C
8BF0136-UP (39LK) 8-S/F, 4-D/F, 2-T/C
2CJ0127-UP (39LK) 8-S/F, 4-D/F, 2-T/C
D3C LGP: 1SG215-UP (39LK) 8-S/F, 4-D/F, 2-T/C
D3G: (37LK) 6-S/F, 4-D/F, 2-T/C
D3G LGP: (39LK) 8-S/F, 4-D/F, 2-T/C
D4C: 1RJ0175-UP (39LK) 8-S/F, 4-D/F, 2-T/C
D4C: 6YL, 7KG (39LK) 8-S/F, 4-D/F, 2-T/C
D4C XL: (41LK) 8-S/F, 6-D/F, 2-T/C
D4G: 41LK 8-S/F, 6 D/F, 2 T/C

VCR4776/36/16 Track Group, 36L, Sealed, w/ SML, w/ 1 B 16" Shoe
VCR4776/3916V Track Group, 39L, Sealed, w/ SML, w/ 1 B 16" Shoe (Optional)
Your Track Groups
VCR2678 Track Pin
VCR3014 Seal Washer
Page 72
Your Track Groups
VCR4773 6Y0650 Bushingg
VCR1620 4K4078 Master Pin Complete-For Dry Track Chain Only
Track Shoes
VCR4583/14 6S8815 Shoe, 1 B 14" (6Y1328)
VCR4583/16 6S8817 Shoe, 1 B 16" (6Y1381)
VCR4583/18 Shoe, 1 B 18"
VCR4583/20 Shoe, 1 B 20"
VCR4584/20V Shoe, Master, 1 B 20"
VCR4583/25 6S8824 Shoe, 1 B 25" (6Y1385)
VCR4583/28 Shoe, 1 B 28"
VCR3656/14 6Y1596 Shoe, 3 B 14" (with mud hole)
VCR3656/14V 6Y1596 Shoe, 3 B 14" (with mud hole) (Optional)
VCR3625/14 6Y1597 Shoe, Master, 3 B 14" (with mud hole)
Page 73
Track Hardware
V8H5724 8H5724 Track Shoe Nut, 1/2"-(*For Old 1/2" Track Chain Only)
V5P4684 5P4684 Master Link Bolt
Bottom Rollers
VCR3000 3T4352 Roller Assembly, S/F (Qty 6) (Qty 8-LGP)
VCR3000V 3T4352 D3 RLR GP SF (3T4352) Optional
VCR3001 3T4353 Roller Assembly, D/F (Qty 4)
VCR3001V 3T4353 D3 RLR GP DF (3T4353) Optional
VCR3060 6S7038 Roller Shell, S/F
VCR3061 6S7040 Roller Shell, D/F
VCR3067 6S3284 Rubber Seal
V0S1585 OS1585 Roller Mounting Bolt (1/2" x 1 1/2")
V2M0849 2M0849 Hard Washer
Carrier Rollers
VCR3002 6S3609 Carrier Roller Assembly (Qty 2)
VCR3002V 6S3609 Carrier Roller Assembly (Optional)
VCR3109 6S3691 Carrier Roller Shell
V1M3097 1M3097 Rubber Seal
Idlers
VCR3004 6S3277 Idler Complete (Can use on D3G - Difference is Yoke Mount Bolts are Metric on G Model)
V9N4173WBV 106-9187 IDLER GRP D3 (CAST) W/Brackets (Optional) Adaptable for the bolt on counterweights
V6S3697 6S3697 Idler Shaft
9 0
V9W7207 6S3 85
6S3285 Sea G oup
Seal Group
V1H9696 1H9696 O-ring, Idler Shaft
V5M5000 5M5000 Lock, Idler Shaft (2)
V0T0768 OTO768 Bolt, Idler Lock (2)
V3B4507 3B4507 Lock washer, Idler Lock (2)
V6S3286 6S3286 Shim, Idler Side Plate (32 or UAR)
184-6590 Idler Group With Blocks (For D3G Models Only - Can Use VCR3004)
Sprockets
VCR4754 6Y2047 Segment Group (5 pieces - 25 Teeth)
VCR4754V 6Y2047 Segment Group (5 pieces - 25 Teeth) (Optional)
V9W9265 9W9265 Segment Bolt (25 needed -1/2")
V5P8245 5P8245 Segment Washer (25 needed)
V8H5724 8H5724 Segment Nut (25 needed)
V9W7228 AT9W7228 Seal Group, Final Drive (4)
Page 74
MODEL: Caterpillar D4C, D4D, D4D-LGP, D4D-SA,
933F,G, 941
Specs: Pitch = 6.75, Link Ht = 93.0mm, Bolt Hole = 9/16",
Bushing OD = 50.8mm
Serial Nos: D4C:24A950-UP
D4D:67A1-UP, 78A1-UP, 85A1-UP, 86A1-UP, 59J1-644, 58J1-UP, 49J1-
473, 22C1-UP, 91A1-UP, 88A1-UP
60J1-1732, 65J1-UP, 66J1-UP, 82J1-UP, 83J1-868, 69K1-386
D4D-LGP:18J1-UP, 61J1-282, 7R1-289
D4D-SA: 20J1-UP, 84J1-UP
933F, G: 42A3293-UP
941:70H1-841, 71H1-UP, 75H1-UP, 80H1-1549

VCR1739/38 4K7095 Chain, 38L, Sealed, w/ Master Pin
Your Track Groups
VCR2872/36 Pin & Bushing Group 36 LK
VCR2872/38 Pin & Bushing Group 38 LK
VCR1732 Link L.H.
VCR1733 Link R.H.
VCR240 Pin
VCR1616 4K3918 Bushing
VCR1618 4K3919 Master Pin
VCR1619 Spacer
VCR1620 4K4078 Master Pin Complete
Track Hardware
V7H3596 7H3596 Track Bolt, 9/16"
Page 75
MODEL: Caterpillar D4D, D4E, D4E LGP, 941, 941B
Specs: Pitch = 6.75, Link Ht = 96.0mm, Bolt Hole = 5/8",
Bushing OD = 53.8 mm
Serial Nos: D4D:65J425 -Up, 66J418 -Up, 97F1052 -Up (36 LK)
D4E:76W 1 -Up, 77W 1 -Up, 27X 1 -Up, 28X 1 -Up, 50X 1 -Up, 51X1 -Up,
68X 1 -Up, 69 X 1 -Up (36LK)
D4E LGP:52X 1 -Up, 71 X 1 -Up, 72 X 1 -Up (40 LK)
941:16U1-Up
941B:80H5056 -Up (38 LK)
Sealed Chains and Track Groups 9/16" B/H

VCR2567/36 7K2049 Chain, 36L, Sealed, w/ Master Pin, 9/16" Bolt Hole
VCR2567/36V 7K2049 Chain, 36L, Sealed, w/ Master Pin, 9/16" Bolt Hole (Optional)
Your Track Groups
VCR2567V Link Segment (V-Track)
VCR2562/36 4K4080 Pin & Bushing Group, 36 LK-Master Pin Type
VCR2873/36 Pin & Bushing Group, 36 LK-Master Pin Type=-Old Type-Unsealed
VCR3198 7K1825 Link, R/H
VCR3199 7K1826 Link, L/H
Sealed Chains and Track Groups 5/8" B/H
VCR2849/36 2V2260 Chain, 36L, Sealed
Chain 36L Sealed, w/ Master Pin
Pin, 5/8"
5/8 Bolt Hole
VCR2849/36V 2V2260 Chain, 36L, Sealed, w/ Master Pin, 5/8" Bolt Hole (Optional)
VCR2849/37 2V2261 Chain, 37L, Sealed, w/ Master Pin
VCR2849/37V 2V2261 Chain, 37L, Sealed, w/ Master Pin (Optional)
VCR2849/38 2V2262 Chain, 38L, Sealed, w/ Master Pin 941/943
VCR2849/38V 2V2262 Chain, 38L, Sealed, w/ Master Pin 941/943 (Optional)
VCR2849/40V 9K9129 Chain, 40L, Sealed, w/ Master Pin (Optional)
VCR2975/36/16 2V2276 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe
VCR4079/38/14 2V2294 Track Group, 38L, Sealed, w/ Master Pin, w/ 2 B 14" Shoe
VCR2975/38/18V Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 18" Shoe (Optional)
VCR2975/3820V Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 20" Shoe (Optional)
Your Track Groups
VCR3192/38 Pin & Bushing Group, 38 LK w/Master Pin
VCR2849P Link Segment (For New Style Pro Links. PRO 4 is casted on side of Links)
VCR3196 Sealed Pin
Page 76
VCR2562 Seal Washer
VCR3197 Spacer
VCR3628/36 1V7072 Chain, 36L, Sealed, w/ SML
VCR3628/38 1V7074 Chain, 38L, Sealed, w/ SML 941/943
VCR3628/38V 1V7074 Chain, 38L, Sealed, w/ SML 941/943 (Optional)
VCR3628/40V 1V7075 Chain, 40L, Sealed, w/ SML (Optional)
VCR3679/36/16 1V7224 Track Group, 36L, Sealed, w/ SML, w/ 1 B 16" Shoe
VCR3680/38/14 9P6401 Track Group, 38L, Sealed, w/ SML, w/ 2 B 14" Shoe
Your Track Groups
VCR3626/36 Pin & Bushing Group, 36 LK
VCR3568V Master Link Complete,
Complete R.H.
R H (2 pieces) (V(V-Track)
Track)
VCR3193 2V4699 Master Pin Complete
VCR3519/36 154-3656 Chain, 36L, SALT, w/ SML
VCR3519/37 1V6817 Chain, 37L, SALT, w/ SML
VCR3519/38 1V4607 Chain, 38L, SALT, w/ SML 941/943
VCR3519/40V 154-3657 Chain, 40L, SALT, w/ SML (Optional)
VCR3604/38/14 9P6402 Track Group, 38L, SALT, w/ SML, w/ 2 B 14" Shoe
Page 77
Your Track Groups
VCR3573 9K8550 Salt Pin
VCR3574 1V4494 Salt Bushing
VCR3992 1V4468 Seal Assembly
VCR3575 1V3361 Thrust Ring
Lubricated Chains and Track Groups-Stepped Bushings-
Proline Track Chain
VCR4261/36 Chain, 36L, SALT, w/ SML (Bushing Dia.= 57.2mm)
VCR4261/36V Chain, 36L, SALT, w/ SML (Bushing Dia.= 57.2mm) (Optional)
VCR4329/36/16 Track Group 36LK SALT w/SML 1B 16" Shoe (Bushing Dia.= 57.2mm)
VCR4329/3816V Track Group 38LK SALT w/SML 1B 16" Shoe (Bushing Dia.= 57.2mm) (Optional)
VCR4329/38/20 Track
T k Group
G 38LK SALT w/SML
/SML 1B 20" ShShoe (B
(Bushing Dia.= 57
hi Di 57.2mm)
2 )
Your Track Groups
VCR4263/38 Pin and Bushing GRP, 38LK NOTE: Not interchangeable with OEM
VCR3573 Salt Pin
VCR3575 Thrust Ring
Page 78
Track Shoes
VCR3599/16 1V4626 Shoe, 1 B 16"
VCR3599/16V 1V4626 Shoe, 1 B 16" (Optional)
VCR3571/16 1V4627 Shoe, Master, 1 B 16"
VCR3571/16V 1V4627 Shoe, Master, 1 B 16" (Optional)
VCR3599/18 1V4622 Shoe, 1 B 18"
VCR3599/20 1V4615 Shoe, 1 B 20"
VCR3599/22 Shoe, 1 B 22"
VCR3599/22V Shoe, 1 B 22" (Optional)
VCR3599/24 Shoe, 1 B 24"
VCR3600/14 8E4805 Shoe, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole)
VCR3601/14 6I8780 Shoe, Master, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole)
VCR3601/14V 6I8780 Shoe, Master, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3600/16 Shoe, 2 B 16" (Without Mud Hole) (5/8" Bolt Hole)
VCR3600/16V Shoe, 2 B 16" (Without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3601/16 Shoe, Master, 2 B 16" (Without Mud Hole) (5/8" Bolt Hole)
VCR3601/16V Shoe, Master, 2 B 16" (Without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3600/18 8E4799 Shoe,
Shoe 2 B 18
18" (without Mud Hole) (5/8"
(5/8 Bolt Hole)
VCR3600/18V 8E4799 Shoe, 2 B 18" (without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3601/18 8E4800 Shoe, Master, 2 B 18" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/18V 8E4800 Shoe, Master, 2 B 18" (without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3248/14 9G6396 Shoe, 3 B 14" (5/8" Bolt Hole) ESS
VCR3602/14 9G6397 Shoe, Master, 3 B 14" (5/8" Bolt Hole)
VCR3602/14V 9G6397 Shoe, Master, 3 B 14" (5/8" Bolt Hole) (Optional)
VCR3248/16 Shoe, 3 B 16" (5/8" Bolt Hole)
VCR3602/16 Shoe, Master, 3 B 16" (5/8" Bolt Hole)
VCR3248/18 Shoe, 3 B 18" (with Mud Hole)
VCR3602/18V Shoe, 3 B 18" (with Mud Hole) (Optional)
VCR3248/20 6T0513 Shoe, 3 B 20" (with Mud Hole)
VCR3248/20V 6T0513 Shoe, 3 B 20" (with Mud Hole) (Optional)
Track Hardware
V7H3597 7H3597 Track Bolt, 5/8"
V1M1408 1M1408 Track Shoe Nut, 5/8"
V3P2274 3P2274 Master Link Bolt, 5/8"
Track Rollers
VCR1328 118-1608 Roller Assembly, S/F (Qty 4)-Crawlers
VCR1328V Roller Assembly, S/F (Qty 4)-Crawlers(Optional)
VCR1329 118-1609 Roller Assembly, D/F (Qty 6)-Crawlers
VCR1329V Roller Assembly, D/F (Qty 6)-Crawlers (Optional)
VCR1318 9P7782 Roller Shell, S/F
VCR1317 9P7786 Roller Shell, D/F
V3K6616 3k6616 Shaft
VCR3267 3V6142 Bushing
VCR397 4K7392 Key
Page 79
V1H8128 1H8128 Gasket
V9B2289 9B2289 Pin
V1S8947 1S8947 Gasket
V7F8267 7F8267 Gasket
V1A1135 1A1135 Roller Mounting Bolt (50mm long)
V0S1601 0S1601 Roller Mounting Bolt (70mm long)
V5P8247 5P8247 Lock washer
Carrier Rollers
VCR2880 6K9880 Carrier Roller Assembly
VCR2832 9W6174 Carrier Roller Shell
V9W7216 9W7216 Seal Group (AT2M2858)
Idlers
VCR2654 Front Idler Group w/Brackets (Shaft- Small End, Shell Diameter = 22")
D4D: 67A, 91A, 18J, 49J537-UP, 66J1-3946, 7R, 78A1621-up, 86A362-up
88A461-up, 22C1-up, 97F-up, 47H1-790, 58J1-UP, 59J1-2080, 60J1-4752
61J1-559, 65J1-2010, 82J1-4101, 83J1-3340, 69K396-up, 74U1-up
D4DLGP: 18J1-up, 7R1-559
Optional for Other Models; Not for D4E 69X1 up,27X1up & 70X
941; 70H-up, 71H-up, 75H-up, 80H1-3039; 941B; 80H3884-5965
D4E: 76W1-2319, 77W1-1126
VCR2048 Idler With Shaft
VCR1439 Idler Shell (22" Diameter)
VCR2655 Front Idler Group w/Brackets (Shaft- Small End, Shell Diameter = 24.25")
D4D: 67A, 91A, 18J, 49J537-UP, 66J1-3946, 7R, 78A1621-up, 86A362-up
88A461-up, 22C1-up, 97F-up, 47H1-790, 58J1-UP, 59J1-2080, 60J1-4752
61J1-559, 65J1-2010, 82J1-4101, 83J1-3340, 69K396-up, 74U1-up
D4DLGP: 18J1-up, 7R1-559
Optional
O ti l for
f Other
Oth Models;
M d l Not
N t for
f D4E 69X1 up,27X1up
27X1 & 70X
941; 70H-up, 71H-up, 75H-up, 80H1-3039; 941B; 80H3884-5965
D4E: 76W1-2319, 77W1-1126
VCR1515 Idler Shell (24.25" Diameter)
VCR2047 4K9984 Idler Shaft
V4F7952 O-ring, Idler Shaft
V4K5285 Bearing, R/H
V4K5286 Bearing, L/H
V9B3488 Plate Assembly., Wear under Idler Bracket (4)
VCR3287 Front Idler Group w/Brackets (Shaft-Large End)

D4D; 47H791-up, 59J2081-up, 60J4753-up, 61J560-up, 65J2011-up, 66J3947-up, 82J4102-
up, 83J3341-up, D4DLGP; 7R560-up
D4E; 76W2320-up, 77W1127-up, 27X-up, 28X-up, 50X-up, 51X-up, 68X-up, 69X-up,
D4ELGP; 52X-up, 71X-up, 72X-up,
941B: 80H5966-up, 16U-up
VCR3286 Front Idler Group Less Brackets
VCR1515 1M8867 Idler Shell 24.25" Diameter
VCR3660 Front Idler with Shaft-(Shaft-Large End)
V7F8267 O-ring, Idler Shaft
V9K8857 Bearing Block, R/H
V9K9113 Bearing Block, L/H
V1H8128 1H8128 O-ring, Idler Bushing
VCR3285 8E7899 Idler Shaft
VCR1326 1V9611 Bushing Assembly
VOT0772 0T0772 Bolt, Idler Lock (2)
Page 80
V4K9943 3B4507 Lock washer, Idler Lock (2)
V4K3585 6S3286 Shim, Idler Side Plate (32 or UAR)
V2V6722 Plate Assembly., Wear under Idler Bracket (4)
V3F8638 3F8638 Spring, Rubber Coated (8)
V4B0897 4B0897 Plate, Spring (8)
V0S1594 0S1594 Bolt, Spring (8)
V3B4506 3B4507 Lock washer (8)
Sprockets
VCR2595 4V4106 Sprocket 29 Teeth (Spline Hub)
D4D: 97F-up, 47H-up, 49J475-up, 59J645-up, 60J1733-up, 82J1950-up
83J869-up, 69K387-up, 74U-up, 78A2524-up
D4DLGP: 61J283-up, 7R290-up
D4E: 76W-up, 77W-up, 27X-up, 28X-up, 50X-up, 51X-up, 68X-up, 69X-up, 7BP-up
D4ELGP: 52X-up, 71X-up, 72X-up
941: 80H1550-3883, 941B: 80H3884-up
VCR2595V Sprocket 29 Teeth (Spline Hub)(Optional)
VCR2594 4V4107 Sprocket Rim (29 Teeth)
VCR2594V 4V4107 SPROCKET RIM D4D(7K2514) Optional
V4F6031 CR678 Sprocket D4 27T (Serial Nbr 7U)
VCR963 5H9107 Sprocket Weld On Rim 27T (Serial Nbr D4 7U)
V9W6666 4K6049 Seal Group (4)
VCR1445 1M6226 Sprocket Rim 933E 11A2596-UP, 25A1-UP/ 933F 42A1-3341 / 933G 42A3342-UP
VCR1445V 1M6226 933 SPROCKET RIM (1M6226) Optional
V4M3067 4K4780 Idler Wear Strip (4) D4 & Early D4D
V7K1293 7K1294 Idler Wear Strip (4) D4D
V4K4780 4M3067 Wear Strip Assembly., includes 4M3067 (4)
V7K1294 7K1293 Wear
W Strip
St i Assembly.,
A bl iincludes
l d 7K1293 (4)
V5V3875 5V3875 Guiding Guard, (4)
V5V3876 5V3876 Guiding Guard, (2)
V0S1621 0S1621 Bolt, Guiding Guard (36)
Page 81
MODEL: Caterpillar 943
Specs: Pitch = 6.75", Link Ht = 96.0 mm, Bushing OD = 53.8
Serial Nos: 943: 3Y1-1593, 31Y1-1527 (38 LK)
943LGP: 4Z1-563; 19Z1-340

VCR2849/38 2V2262 Chain, 38L, Sealed, w/ Master Pin
VCR2849/38V 2V2262 Chain, 38L, Sealed, w/ Master Pin (Optional)
VCR4079/38/14 2V2294 Track Group, 38L, Sealed, w/ Master Pin, w/ 2 B 14" Shoe (941/943)
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 p
Spacer
VCR3680/38/14 9P6401 Track Group, 38L, Sealed, w/ SML, w/ 2 B 14" Shoe (941/943)
Your Track Groups
VCR3519/38 1V4607 Chain, 38L, SALT, w/ SML
VCR3604/38/14 9P6402 Track Group, 38L, SALT, w/ SML, w/ 2 B 14" Shoe (941/943)
VCR3605/38/14 9G6398 Track Group, 38L, SALT, w/ SML, w/ 3 B 14" Shoe
Page 82
Your Track Groups
VCR3574 1V4494 Salt Bushing
Proline Track Chain
VCR4261/38 Chain, 38L, SALT, w/ SML, Proline Chain (Bushing Dia.= 57.2mm)
VCR4261/38V Chain, 38L, SALT, w/ SML, Proline Chain (Bushing Dia.= 57.2mm) (Optional)
VCR4330/38/14 Track Group, 38L, SALT, w/ SML, Proline, w/ 2 B 14" Shoe (Bushing Dia.= 57.2mm)
VCR4330/3814V Track Group, 38L, SALT, w/ SML, Proline, w/ 2 B 14" Shoe (Bush Dia 57.2mm) (Optional)
Your Track Groups
VCR4333 7T4173 Track Link, R.H.
VCR4334 7T4174 Track Link, L.H.
VCR4339 7T4628 Salt Bushing
Track Shoes
VCR3600/14 8E4805 Shoe, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole)
VCR3601/14 6I8780 Shoe, Master, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole)
VCR3601/14V 6I8780 Shoe, Master, 2 B 14" (Without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3600/18 8E4799 Shoe, 2 B 18" (without Mud Hole) (5/8" Bolt Hole)
VCR3600/24 Shoe, 2 B 24" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/24 Shoe, Master, 2 B 24" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/24V Shoe, Master, 2 B 24" (without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3248/14 9G6396 Shoe, 3 B 14" (5/8" Bolt Hole)
VCR3602/14 9G6397 Shoe, Master, 3 B 14" (5/8" Bolt Hole)
VCR3602/14V 9G6397 Shoe, Master, 3 B 14" (5/8" Bolt Hole) (Optional)
Track Hardware
V7H3597 7H3597 Track Bolt, 5/8"
Bottom Rollers
VCR1328 118-1608 Roller Assembly, S/F (5/8" Bolt Holes on Collars) (Qty 8)
VCR1328V Roller Assembly, S/F (5/8" Bolt Holes on Collars) (Qty 8) (Optional)
VCR1329 118-1609 Roller Assembly, D/F (5/8" Bolt Holes on Collars) (Qty 4)
VCR1329V Roller Assembly, D/F (5/8" Bolt Holes on Collars) (Qty 4) (Optional)
VCR1318 9P7782 Roller Shell, S/F
VCR1317 9P7786 Roller Shell, D/F
Page 83
V3K6616 3K6616 Shaft
VCR397 4K7392 Key
V1H8128 1H8128 Gasket
V9B2289 9B2289 Pin
V1S8947 1S8947 Gasket
V7F8267 7F8267 Gasket
V1A1135 1A1135 Roller Mounting Bolt (50mm long)
V0S1601 S1601 Roller Mounting Bolt (70mm long)
V3B4510 3B4510 Lock washer
Carrier Rollers
VCR2880 6K9880 Carrier Roller Assembly (Qty 2)
VCR2880V Carrier Roller Assembly (Qty 2) (Optional)
Idlers
VCR3750 Front Idler with Shaft
VCR3749 7T1315 Idler Shell (943)
V7F8267 7F8267 O-ring, Idler Shaft
VOT0772 OTO768 Bolt, Idler Lock (2)
Sprockets
VCR4371 6Y5651 Segment Group (Group consists of 5 pieces total per side) (25 Teeth)
V3S8182 3S8182 Sprocket Bolt (20 per side)
V7H3607 7H3607 Sprocket Nut (20 per side)
V1V4043 1V4043 Seal, Track Adjuster
V7P7208 7P7208 Wear Strip, Guiding Guard Front (4)
V8G6793 8G6793 Wear Strip, Guiding Guard Rear (4)
V0S1621 Bolt, Wear Strip Mounting (36)
Page 84
MODEL: Caterpillar 943-HighLink
Serial Nos: 943: 3Y1594 -Up, 31Y 1528 -Up (38 Links)
943 LGP: 4Z 564 -Up, 19Z 341 -Up (38 Links)

VCR4330/38/14 7T4630 Track Group, 38L, SALT, w/ SML, w/ 2 B 14" Shoe
VCR4330/3814V 7T4630 Track Group, 38L, SALT, w/ SML, w/ 2 B 14" Shoe (Optional)
Your Track Groups
VCR3992 1V4468 Seal Assemblyy
Track Shoes
VCR3601/14 6I8780 Shoe, Master, 2 B 14" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/14V 6I8780 Shoe, Master, 2 B 14" (without Mud Hole) (5/8" Bolt Hole) (Optional)
VCR3600/24 Shoe, 2 B 24" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/24 Shoe, Master, 2 B 24" (without Mud Hole) (5/8" Bolt Hole)
VCR3601/24V Shoe, Master, 2 B 24" (without Mud Hole) (5/8" Bolt Hole) (Optional)
Track Hardware
V7H3597 7H3597 Track Bolt, 5/8"
Bottom Rollers
VCR4305 7G4836 Roller Assembly, S/F With Bolt On Retainer (Qty 8) #1, 3, 4, 6
VCR4306 7G4837 Roller Assembly, D/F With Bolt On Retainer (Qty 4) #2, 5
VCR4307 7G4833 Roller Shell, S/F w/ bushings
VCR4308 7G4832 Roller Shell, D/F w/ bushings
V9W7232 7T4080 Seal Group
V1B4367 1B4367 Roller Mounting Bolt
V5P8247 5P8247 Washer
Page 85
NOTE: When Replacing Rollers Check For Bolt On Retainers To Identify
New Style Series III Bottom Rollers
VCR6150 Roller Assembly S/F Series III Note: These rollers have collars
VCR6150V 124-8237 Roller Assembly S/F Series III Note: These rollers have collars (Optional)
VCR6151 Roller Assembly D/F Series III Note: These rollers have collars
VCR6151V 124-8240 Roller Assembly D/F Series III Note: These rollers have collars (Optional)
V1A8537 1A8537 Roller Mounting Bolt Series III
Carrier Rollers
VCR2880 6K9880 Carrier Roller Assembly
Idlers
VCR3749 7T1315 Idler Shell (943)
VOT0772 OTO768 Bolt, Idler Lock (2)
Sprockets
V7H3607 7H3607 Sprocket Nut (20 per side)
V1V4043 1V4043 Seal, Track Adjuster
V7P7208 7P7208 Wear Strip, Guiding Guard Front (4)
V8G6793 8G6793 Wear Strip, Guiding Guard Rear (4)
V0S1621 5P2228 Bolt, Wear Strip Mounting (36)
Page 86
MODEL: Caterpillar D4H
Specs: Pitch = 6.75", Link Ht = 98mm, Bushing OD = 55.9
Serial Nos: D4H: 2AC1 -Up, 8PB1-6090 (39 Links)
D4H LGP: 3AC1 -Up, 9DB1 -Up (44 Links)
D4H XL: 8PJ1-663 (41LK)
AT3P2274 Master Bolt. It is too long and will loosen up. Use
Cat M.B 9G8592

VCR4341/39 6Y5407 Chain, 39L, SALT, w/ SML
VCR4341/39V 6Y5407 Chain, 39L, SALT, w/ SML (Optional)
VCR4341/41 8E9817 Chain, 41L, SALT, w/ SML
VCR4341/41V 8E9817 Chain, 41L, SALT, w/ SML (Optional)
VCR4341/44 6Y5410 Chain, 44L, SALT, w/ SML (LGP)
VCR4341/44V 6Y5410 Chain, 44L, SALT, w/ SML (LGP) (Optional)
VCR4340/44/18 9W4073 Track Group, 44L, SALT, w/ SML, w/ 1 B 18" Shoe (LGP)
VCR4340/44/30 9W4071 Track Group, 44L, SALT, w/ SML, w/ 1 B 30" Shoe (LGP)
Your Track Groups
VCR4342/39
C / Pin and Bushing Group,
G 39 LK
VD4HDRY/44V Pin and Bushing Group, 44 LK (Optional) V-Track Chain
VCR4343/39 Bushing Group, 39 LK
VD4HSMLPIN Joining Pin for Split Master Link (Extra)
VCR4344 CR4344 Master Link Complete, R.H. (2 pieces)
VCR4345 CR4345 Master Link Complete, L.H. (2 pieces)
VCR4347 9G8581 Track Link, R.H.
VCR4348 9G8582 Track Link, L.H.
VCR3573 9K8550 Salt Pin (Reference 6Y9260)
VCR4353 9G8588 Salt Bushing
VCR4354 3T5634 Seal Assembly
VCR4355 9G8591 Thrust Ring
Track Shoes
VCR4358/14 Shoe, 1 B 14"
VCR4358/16 3T0358 Shoe, 1 B 16"
VCR4358/18 3T0360 Shoe, 1 B 18"
VCR4358/18V 3T0360 Shoe, 1 B 18" (Optional)
VCR4358/20 8E9812 Shoe, 1 B 20"
VCR4358/20V 8E9812 Shoe, 1 B 20" (Optional)
VCR4358/22 8E9810 Shoe, 1 B 22"
VCR4358/24 8E4972 Shoe, 1 B 24"
VCR4358/26 Shoe, 1 B 26"
VCR4358/28 Shoe, 1 B 28"
VCR4358/30 3T6163 Shoe, 1 B 30" (Reference OEM # 3T6163)
Page 87
VCR4358/30V 3T6163 Shoe, 1 B 30" (Reference OEM # 3T6163) (Optional)
No Master Shoe on D4H
Track Hardware
V9G3110 9G3110 Track Shoe Bolt, 5/8"
" If OEM Cat Chains MUST Use 2 - 9G8592 & 2 - 3T8601 per chain.
V3P2274 3P2274 Master Link Bolt-Long (2 required) Sorefa Chain
V3T8601 3T8601 Master Link Bolt-Short (2 required) Sorefa Chain
Bottom Rollers
VCR4306 7G4837 Roller Assembly, D/F With Bolt On Retainer (Qty 6) #2, 4, 6
V7T4030 7T4030 Stabilizer Ring
VCR4367 8P7002 Bushing
V1A8537 1A8537 Roller Mounting Bolt Series III
Carrier Rollers (verify if machine has c/rollers installed)
C 880
VCR2880 6 9880
6K9880 Ca e Roller
Carrier o e Assembly
sse b y (Qty 2))
Idlers
VCR4585 160-9753 Idler Less Brackets 500mm Tread Diameter D4H Front; D4H LGP Front & Rear
VCR4585V 160-9753 Idler Less Brackets (Optional) Symmetrical Seal
VCR4586 186-3566 Idler with Bushing D4H Front; D4H LGP Front & Rear
VCR4587 160-9754 Idler Less Brackets 475mm Tread Diameter D4H Rear **(Use for Skidder App.)
VCR4587V 160-9754 Idler Less Brackets (Optional) Symmetrical Seal
VCR4588 186-3584 Idler with Bushing D4H Rear
V1617247 161-7247 Seal Group, Symmetrical
Sprockets
VCR4373V 6Y5245 Segment Group (Group consists of 5 pieces total per side) (25 Teeth) (Optional)
V7H3607 7H3607 Sprocket Nut (20 pieces per side)
V6V4316 6V4316 Washer (20 pieces per side)
V8G4945 8G4945 Track Adjuster Seal Assembly.
V9U9198 9U9198 Strip, Guiding Guard (8)
V0S1621 5P2228 Bolt, Guiding Guard (24)
V5P8245 8T4223 Washer (24)
Page 88
MODEL: Caterpillar D4H, D4HXL, D4HLGP-Skidder
Machines, D5MXL, D5MLGP, D5NXL, D5NLGP
Specs: Pitch = 6.75", Link Ht = 106mm, Bushing OD =

60.7mm, Bolt Hole = 5/8"
Serial Nos: D4H: (39 Links)-Standard (S/N: 2AC5597-Up, 8PB6091-Up) 6-D/F Rollers, 8-
S/F Rollers, 2-Carrier Rollers
D4H-XL: (S/N: 2AC5597-UP, 8PB6091-UP, 8PJ664-Up) 6-D/F Rollers, 8-S/F
Rollers, 2-Carrier Rollers
D4H: (44 Links)-(LGP, Skidder, 561H)(Serial number 9GJ1116-UP, 4NK164-
UP, 8PJ664-Up) 6-D/F Rollers, 8-S/F Rollers, 2-Carrier Rollers
D4H: (44 Links) (TSK, Serial number 7PK147-UP) 6-D/F Rollers, 8-S/F
D5MXL:(41Links) (Serial Number 4JS1-UP, 6GN1-Up, 5ES1-Up, 4BR1-Up)
D5M LGP:(44 Links)( Serial number: 5FS1-UP, 3CR1-Up, 6AS1-Up, 3DR1-

Up, 7LR1-Up) 8-D/F Rollers, 8-S/F Rollers, 2-Carrier Rollers
D5NXL: (41Lk) (S/N: AGG1-Up, CFH1-Up) 6-D/F Rollers, 8-S/F Rollers, 2-
Carrier Rollers
D5NLGP: (44Lk) (S/N: AKD1-Up, CKT1-Up) 8-D/F Rollers, 8-S/F Rollers, 2-
Carrier Rollers

VCR5569/39/18 108-2620 Track Group, 39L, SALT, W/SML, Heavy Duty Rail, W/ 1 B 18" Shoe
VCR5569/3918V Track Group, 39L, SALT, W/SML, Heavy Duty Rail, W/ 1 B 18" Shoe (Optional)
VCR5569/41/18 Track Group, 41L, SALT, W/SML, Heavy Duty Rail, W/ 1 B 18" Shoe
VCR5569/4118V Track Group, 41L, SALT, W/SML, Heavy Duty Rail, W/ 1 B 18" Shoe (Optional)
VCR5569/4120V 108-2621 Track Group, 41L, SALT, W/SML, Heavy Duty Rail, W/ 1 B 20" Shoe (Optional)
Your Track Groups
VCR5565/37 Pin and Bushing Group, 37 LK "Sorefa/ITM chain only"
VCR5564/39 Bushing Group, 39 LK "Sorefa/ITM chain only"
VCR5566/37 Pin and Bushing Group 37LK ** For OEM chains only **
VCR5563/39 Bushing Group 39LK ** For OEM chains only **
V1080949 1080949 Master Link Complete, R.H. (2 pieces)
Page 89
V1080950 1080950 Master Link Complete, L.H. (2 pieces)
V1080947 1080947 Track Link, R.H.
V1080948 1080948 Track Link, L.H.
VCR5559 1080943 Salt Pin
VCR5567 1080944 Salt Bushing (4.45" length)
V1080944 Salt Bushing (4.67" length) ** For OEM chains only **
V1107011 Seal Assembly
VCR5562 1080945 Thrust Ring
Track Shoes
VCR4358/18 3T0360 Shoe, 1 B 18"
VCR4358/20 8E9812 Shoe, 1 B 20"
VCR4358/22 8E9810 Shoe, 1 B 22"
VCR4358/24 8E4972 Shoe, 1 B 24"
VCR4358/26 Shoe, 1 B 26"
VCR4358/28 Shoe, 1 B 28"
VCR4358/30 3T6163 Shoe, 1 B 30"
Track Hardware
" If OEM Cat Chains MUST Use (2) - 9G8592 & (2) - 3T8601 per chain.
V9G8592 3P2274 Master Link Bolt - 2 Required (Long - 5/8" x 82.6mm) ITM CHAIN
VD01040L0N34 Master
M t Link Bolt
Li k B lt - 2 R
Required (Shortt - 5/8" X 75mm)
i d (Sh 75 ) ITM CHAIN
Bottom Rollers
V9W7232 7T4080 Seal Group For CR4305 & CR4306
VCR4367 8P7002 Bushing For CR4305 & CR4306
V1B4367 1B4367 Bolt For CR4305 & CR4306
V7T4030 7T4030 Stabilizer Ring For CR4305 & CR4306
V1A8537 1A8537 Roller Mounting Bolt Series III (5/8) D4H
V8T0357 8T0357 Roller Mounting Bolt Series III (16mm) D5M
Idlers
VCR4585 190-1551 Idler Less Brackets (Large Diameter 533mm)
Front Idler For: D4H, D4H-XL, D5M-XL, D5N-XL
Page 90
Front & Rear Idler For: D4H-LGP, D5M-LGP, D5N-LGP
VCR4585V Idler Less Brackets (Optional) Symmetrical Seal Design (See above for Models)
VCR4586 186-3566 Idler Shell with Bushing (Large Diameter 533mm) (For CR4585 Idler Groups)
VCR4587 190-1534 Idler Less Brackets (508mm Diameter) D4H Rear **(Use for Skidder App.)
Rear Idler For: D4H, D4H-XL, D5M-XL, D5N-XL
VCR4587V Idler Less Brackets (Optional) Symmetrical Seal Design (See above for Models)
VCR4588 186-3584 Idler Shell with Bushing (Small Diameter 508mm) (For CR4587 Idler Groups)
Sprockets
VCR5601 108-0946 Segment Group (Group consists of 5 pieces total per side)
VCR5601V 108-0946 Segment Group (Group consists of 5 pieces total per side) (Optional)
V6V4316 6V4316 Washer (20 pieces per side)
V8G4945 8G4945 Track Adjuster Seal Assembly.
V9U9198 9U9198 Strip, Guiding Guard (8) D4H
V0S1621 5P2228 Bolt, Guiding Guard (24) 1/2 D4H
V5P8245 8T4223 Washer (24) D4H
V1091231 109-1231 Strip, Guiding Guard (8) D5M
V8T4192 8T4192 Bolt, Guiding Guard (24) 12mm
V5P8245 8T4223 Washer (24) D4H
Page 91
MODEL: Caterpillar D5C, D5G, 939-Component Parts are
not interchangeable with OEM
Specs: Pitch = 6.75", Link Ht = 98mm, Bushing OD = 55.9
Serial Nos: D5C STD: S/N: 5HS1-Up, 6CS1-Up, 6PJ1-Up, 9DL1-Up (37 LK) 8-S/F
Rollers, 4-D/F Rollers, 2-Carrier Rollers
D5C-LGP: S/N: 3MK1-Up, 6ZL1-Up (37 LK) 8-S/F Rollers, 4-D/F Rollers, 2-
Carrier Rollers
D5C-XL: S/N 7PS1-Up, 8ZS1-Up, FDH, CLF, FDW, CLW (39LK) 8-D/F
Rollers, 6-S/F Rollers, 2-Carrier Rollers
D5G-XL/LGP: (39LK) 8-S/F, 6-D/F, 2-T/C
939: (37LK) This model is a TRACK LOADER - Must use a 2-BAR SHOE
Note: D5C With S/N 6PJ1-371, 3MK1-242 May have D4E Chains. Please
confirm link number before ordering

VCR4341/37 6I9527 Chain, 37L, SALT, w/ SML
VCR4341/37V 6I9527 Chain, 37L, SALT, w/ SML (Optional)
VCR4340/37/18 6I9569 Track Group, 37L, SALT, w/ SML, w/ 1 B 18" Shoe
VCR4340/3718V 6I9569 Track Group, 37L, SALT, w/ SML, w/ 1 B 18" Shoe (Optional)
VCR4340/37/20 6I9570 Track Group, 37L, SALT, w/ SML, w/ 1 B 20" Shoe
VCR4340/3720V 6I9570 Track Group, 37L, SALT, w/ SML, w/ 1 B 20" Shoe (Optional)
VCR4340/39/18 p 39L, SALT, w/ SML, w/ 1 B 18" Shoe
Track Group,
VCR4340/39/20 104-8663 Track Group, 39L, SALT, w /SML, w/ 1 B 20" Shoe
VCR4340/3920V 104-8663 Track Group, 39L, SALT, w /SML, w/ 1 B 20" Shoe (Optional)
Your Track Groups
VCR4342/39 Pin and Bushing Group, 39 LK (WILL NOT WORK WITH OEM CHAINS)
VCR4347 9G8581 Track Link, R.H.
VCR4348 9G8582 Track Link, L.H.
VCR3573 9K8550 Salt Pin (Reference 6Y9260)
VCR4353 9G8588 Salt Bushing
Track Shoes
VCR4358/18 3T0360 Shoe, 1 B 18"
VCR4358/20 8E9812 Shoe, 1 B 20"
VCR4358/22 8E9810 Shoe, 1 B 22"
VCR4358/24 8E4972 Shoe, 1 B 24"
VCR4358/26 Shoe, 1 B 26"
Page 92
VCR4358/28 Shoe, 1 B 28"
VCR4358/30 3T6163 Shoe, 1 B 30"
VCR5715/16 102-3585 Shoe, 2 B 16" (Without Mud Hole) (5/8" Bolt Hole)
VCR5715/18 102-3587 Shoe, 2 B 18" (Without Mud Hole) (5/8" Bolt Hole)
Track Hardware
V3P2274 3P2274 Master Link Bolt-Long (2 required)
V3T8601 3T8601 Master Link Bolt-Short (2 required)
Bottom Rollers
V7T4030 7T4030 Stabilizer Ring
V1B4367 1B4367 Roller Mounting Bolt 5/8" X 3
V1A8537 1A8537 Roller Mounting Bolt Series III (5/8)
Idlers
VCR5420 8Y5049 Front Idler Group (Will Not Work on D5G)
VCR5420V Front Idler Group (Optional) (Will Not Work on D5G)
9U9065 Idler Shell
VCR1326 1V9611 Busing Assembly.
V7K1089 3V6142 Bushing
V9W7216 8E8340 Seal Group
V5M5000 5M5000 Lock (2)
V0T0320 8C6877 Bolt (2)
V5P8244 7X618 Washer (2)
Sprockets
VCR5412 Segment Group (Group consists of 5 pieces total per side) (23 Teeth)
V6V0937 Segment Bolt (23 pieces needed per side)
V7H3607 Segment Nut (23 pieces needed per side)
V2S5658 Segment Washer (23 pieces needed per side)
V904406 Track Adjuster Seal Kit
V105-4125 105-4125 Strip, Guiding Guard (8) Weld On
Page 93
MODEL: Caterpillar D5, D5 LGP, D5B, D5B LGP, 951C,
953 , 953 LGP, 955K, 955L
Specs: Pitch = 6.906", Link Ht = 103.2 mm, Bushing OD =
58.738 mm , Bolt Diameter = 5/8"
Serial Nos: D5: 51H, 52H, 81H, 82H, 83H, 84H, 37J, 50J, 54J, 62J, 63J, 67J, 68J, 93J,
94J, 95J, 96J, 97J, 9M (39 LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
D5LGP: 98A, 6R, 12R (46 LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
D5B: 22X1-Up, 23X1-Up, 24X1-Up, 25X1-Up, 43X1-Up, 44X1-Up, 47X1-Up,

48X1-Up, 8MB1-Up (39 LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D5BLGP: 45X1-Up, 46X1-Up, 49X1-Up (46 LK) 6-S/F Rollers, 8-D/F Rollers,
4-Carrier Rollers
951C: 32F902-Up, 19H-Up, 69H-Up, 86J-Up, 63K-Up (39 LK)
955K: 48H, 53H, 61H, 31J, 57J, 64J1-10440, 71J1-6180, 85J1-4671 (4ILK)
955L: 85J4672-10128 (41LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
953: 76Y -Up, 77 Y 1-1394, 78Y -Up (40LK)

953LGP: 5Z -Up, 20Z1-243, 44Z -Up (40 LK)

VCR2823/40 Chain, 40L, Sealed
VCR4000/39/14 2V2116 Track Group, 39L, Sealed, w/ Master Pin, w/ 2 B 14" Shoe 951B/951C
VCR3048/39/14 8K9600 Track Group, 39L, Sealed, w/ Master Pin, w/ 3 B 14" Shoe 951B/951C
VCR3048/39/15 Track Group, 39L, Sealed, w/ Master Pin, w/ 3 B 15" Shoe 951B/951C
VCR4000/41/15 2V1117 Track Group, 41L, Sealed, w/ Master Pin, w/ 2 B 15" Shoe 955K/955L
VCR3048/41/15 6K0909 Track Group, 41L, Sealed, w/ Master Pin, w/ 3 B 15" Shoe
Your Track Groups
VCR2175/39 7S6160 Pin and Bushing Group, 39 LK-Master Pin Type
VCR2175/41 Pin and Bushing Group, 41 LK-Master Pin Type
VCR3610/39 Pin and Bushing Group, 39 LK-Split Master Type
VCR2823P Link Segment (For New Style Pro Links. PRO 5 Is Casted On Side Of Links)
VCR2821 3P7153 Track Link, R.H.
VCR2822 3P7154 Track Link, L.H.
Page 94
VCR1605 8M7456 Sealed Master Pin
Sealed Chains and Track Groups /w SML
VCR3627/39 3P5757 Chain, 39L, Sealed, w/ SML
VCR3627/46 3P5762 Chain, 46L, Sealed, w/ SML
VCR4001/39/14 9G6395 Track Group, 39L, Sealed, w/ SML, w/ 2 B 14" Shoe
Your Track Groups
VCR2175/39 7S6160 Pin and Bushing Group, 39 LK-Master Pin Type
VCR2175/41 Pin and Bushing Group,
Group 41 LKLK-Master
Master Pin Type
VCR3610/39 Pin and Bushing Group, 39 LK-Split Master Type
VCR2821 3P7153 Track Link, R.H.
VCR2822 3P7154 Track Link, L.H.
VCR1605 8M7456 Sealed Master Pin
VCR3597/40/15 Track Group, 40L, SALT, w/ SML, w/ 2 B 15" Shoe w/ Mud Hole
Page 95
VCR3598/39/14 9G6391 Track Group, 39L, SALT, w/ SML, w/ 3 B 14" Shoe w/ Mud Hole
VCR4002/41/15 9K9868 Track Group, 41L, SALT, w/ SML, w/ 2 B 15" Shoe
Your Track Groups
VCR3648/39 6T3579 Bushing Group, 39 LK
VCR3585 3P3880 Salt Pin
VCR3586 3P3879 Salt Bushing
VCR3587 3P3878 Thrust Ring
EXTENDED WEAR LIFE UNDERCARRIAGE
VCR4264/39 9W8844 Chain, 39L, SALT, w/ SML
VCR4264/39V 9W8844 Chain, 39L, SALT, w/ SML (Optional)
VCR4264/40 7T4637 Chain, 40L, SALT, w/ SML
VCR4264/40V 7T4637 Chain, 40L, SALT, w/ SML (Optional)
VCR4264/46 Chain, 46L, SALT
Chain 46L SALT, w/ SML
VCR4264/39/18 Track Group, 39L, SALT, w/ SML, Proline Rail, w/ 1 B 18" Shoe (D5)
VCR4264/3918V Track Group, 39L, SALT, w/ SML, Proline Rail, w/ 1 B 18" Shoe (D5) (Optional)
VCR4264/40/20 Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 1 B 20" Shoe
VCR4264/4020V Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 1 B 20" Shoe (Optional)
VCR4264/4024V Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 1 B 24" (Optional)
VCR4264/46/34 Track Group, 46L, SALT, w/ SML, Proline Rail, w/ 1 B 34" Shoe (D5-LGP)
VCR4393/40/15 Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 2 B 15" Shoe W/O Mud Hole
VCR4393/4015V Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 2 B 15" Shoe W/O Mud Hole (Optional)
Your Track Groups
VCR4265/40 3Y3884 Bushing Group, 40 LK (Ref. 6Y3884)
Page 96
Track Shoes
VCR3242/16 5S0820 Shoe, 1 B 16"
VCR3242/18 5S0821 Shoe, 1 B 18"
VCR3242/18V 5S0821 Shoe, 1 B 18" (Optional)
VCR3584/18 3P3889 Shoe, Master, 1 B 18"
VCR3584/18V 3P3889 Shoe, Master, 1 B 18" (Optional)
VCR3242/20 5S0822 Shoe, 1 B 20"
VCR3242/22 5S0823 Shoe, 1 B 22"
VCR3584/22V 3P3891 Shoe, Master, 1 B, 22" (Optional)
VCR3242/24 7S0706 Shoe, 1 B 24 "
VCR3242/24V 7S0706 Shoe, 1 B 24 " (Optional)
VCR3242/28 8S2548 Shoe, 1 B 28 "
VCR3242/30 8S2548 Shoe, 1 B 30"
VCR3242/34 8S2548 Shoe, 1 B 34"
VCR3584/34V 3P3893 Shoe,
Shoe Master,
Master 1 B 34
34" (Optional)
VCR3305/15 Shoe 2 B 15" w/Mud Hole
VCR3305/15 Shoe Master 2 B 15" w/Mud Hole
VCR3305/20 Shoe 2 B 20" w/Mud Hole
VCR3594/20 Shoe Master 2 B 20" w/Mud Hole
VCR3726/14 9G6392 Shoe, 2 B 14"
VCR3726/14V 9G6392 Shoe, 2 B 14" (Optional)
VCR3939/14 9K9865 Shoe, Master, 2 B 14"
VCR3726/15 8E4724 Shoe, 2 B 15"
VCR3939/15 8E4725 Shoe, Master, 2 B 15"
VCR3939/15V 8E4725 Shoe, Master, 2 B 15" (Optional)
VCR3726/16 Shoe, 2 B 16"
VCR3726/18 3P4115 Shoe, 2 B 18"
VCR3726/20 7P1347 Shoe, 2 B 20"
VCR3726/20V 7P1347 Shoe, 2 B 20" (Optional)
VCR3726/22 Shoe, 2 B 22"
VCR3229/14 9G6389 Shoe, 3 B 14" (with Mud Hole) 951C
VCR3229/14V 9G6389 Shoe, 3 B 14" (with Mud Hole) 951C (Optional)
VCR3595/14 2V5109 Shoe, Master, 3 B 14" (with Mud Hole)
VCR3229/15 6K1910 Shoe, 3 B 15" (with Mud Hole) 955K/955L
VCR3229/15V 6K1910 Shoe, 3 B 15" (with Mud Hole) 955K/955L (Optional)
VCR3595/15 2V5107 Shoe, Master, 3 B 15" (with Mud Hole)
Track Hardware
V7H3597 7H3597 Track Shoe Bolt, 5/8"
Page 97
Bottom Rollers
VCR1292 118-1611 Roller Assembly, S/F
VCR1292V 118-1611 Roller Assembly, S/F (Optional)
VCR1293 118-1612 Roller Assembly, D/F
VCR1293V 118-1612 Roller Assembly, D/F (Optional)
VCR1281 Bushing Assembly
V9W7216 Seal Group
V8S5796 Bushing
V4F0324 Key
VCR1286 Collar-Inner
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
V0S1601 0S1601 Roller Mounting Bolt (70mm long) S/N 93J, 94J, 95J1-472, 96J1-6031,
V8S9092 8S9092 Roller Mounting Bolt (57mm long) All Others
V8E2027TH 118-1632 Extended Wear Roller Assembly, S/F
V9W9353TH 9W9353 Extended Wear Roller Shell, S/F
V8E2026TH 118-1633 Extended Wear Roller Assembly, D/F
V9W8350TH 9W8350 Extended Wear Roller Shell, D/F
VCR6152V Roller Assembly S/F Series III (Optional) Note: These rollers have collars
VCR6153V Roller Assembly D/F Series III (Optional) Note: These rollers have collars
V8S9092 8S9092 Roller Mounting Bolt Series III (5/8)
Carrier Rollers
VCR2881 5A8374 Carrier Roller Assembly
VCR2831 5A8375 Carrier Roller Shell
V9W6647 1M8747 Seal Group
Idlers
VCR3188 Front Idler with Shaft (D5 s/n 51H, 52H, 81H, 82H, 83H, 84H, 50J, 54J, 92J-577
94J-1419, 95J-268, 96J-2099, 9M-up; D6 s/n 8U10971-up, 9U29219-up;
D6B s/n 37A, 44A, 56A, 57A, 37H, 38H; 951 s/n 89A-170; 955E s/n 12A7686-up,
955F s/n 45A, 51A; 955H s/n 60A-7503, 72A-905, 77A-211
VCR1468 5M1913 Front Idler Shaft-Use with CR3188 ONLY
V8S5796 8P6652 Bushing
V7F2022 7F2022 Taper Pin, Shaft Lock
V6B6684 6B6684 Nut
VCR3171 Front Idler Group Comp.(s/n D5 93J578-up, 94J1420-up, 95J269-up, 96J2100-up)

VCR3171V Front Idler Group Comp.(s/n D5 93J578-up, 94J1420-up, 95J269-up, 96J2100-up)
(Optional)
VCR3170 Front Idler w/Shaft **s/n same as above
Page 98
VCR2715 1P1555 Front Idler Shaft-Use with CR3170 ONLY
V4F5192 4F5192 Bolt, Idler Lock
V3B4507 3B4507 Washer, Idler Lock
VCR3190 Front Idler Group Complete (951 s/n 89A171-up, 91A, 63K; 951B/C s/n 15F, 32F
VCR3190V 19H, 69H, 79H, 72J, 78J, 86J; 955H s/n 60A7504 up, 72A906 up, 77A212 up
93A up; 955K s/n 48H, 53H, 61H, 31J, 57J, 64J-10440, 71J-6180, 85J-4671
955L s/n 85J4672-10128; D5 s/n 37J, 62J, 63J, 67J, 68J, 97J; D5LGP s/n 98A,
6R, 12R, 22X, 23X, 24X, 25X, 43X, 44X, 47X, 48X, 8MB; D5BLGP s/n 45X, 46X, 49X
VCR3189 Front Idler with Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z)
VCR3189V Front Idler with Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z) (Optional)
V7P7911 IDLER LINK (953) RH OUTER/LH INNER
V7P7912 IDLER LINK (953) RH INNER/LH OUTER
V3B8428 3B8428 Bolt, Idler Lock
V953WBV Front Idler Complete 953 All
Sprockets
VCR2194 5S4822 Sprocket Rim (Weld On) (27 Teeth)
(D5 s/n 51H, 52H, 81H, 82H, 83H, 84H, 37J, 50J, 54J, 62J, 63J, 67J-1070
68J-3734, 93J-995, 94J-2640, 95J-452, 96J-5825, 97J-604, 9M;
D5LGP s/n 98A, 6R-568, 12R-160)
VCR2968 4V5376 Sprocket Rim (Weld On) (30 Teeth)-Use S/N 19H1567-up ONLY
VCR2968V Sprocket Rim (Weld On) (30 Teeth)-Use S/N 19H1567-up ONLY (Optional)
VCR2967 4V5374 Sprocket Group (951C Only)
VCR2967V Sprocket Group (951C Only) (Optional)
VCR2412 5S0835 Sprocket Adapter Group-To convert single piece sprocket to segmented sprocket
VCR4408 7P2635 Segment Group (9 Pieces 27 Teeth)**Same S/N as above plus; 953 S/N (Ref. 7P2636)
76Y, 77Y, 78Y; 953LGP s/n 5Z, 20Z, 44Z, D5, D5B
VCR4408V 7P2635 Segment Group (9 Pieces 27 Teeth)**Same S/N as above plus; 953 S/N (Ref. 7P2636)
76Y, 77Y, 78Y; 953LGP s/n 5Z, 20Z, 44Z, D5, D5B (Optional)
V6V0937 Sprocket Bolt (27 pieces per side) (For CR4408 Segments)
V7H3607 Sprocket Nut (27 pieces) (For CR4408 Segments)
VCR3609 6K1430 Segment Group (955K, 955L) (29 Teeth) (8 Pieces)
(955K s/n 48H, 53H, 61H, 31J, 57J, 64J-10440, 71J-6180, 85J-4671
955L s/n 85J4672-10128)
VCR3609V 6K1430 Segment Group (955K, 955L) (29 Teeth) (8 Pieces) (Optional)
(955K s/n 48H, 53H, 61H, 31J, 57J, 64J-10440, 71J-6180, 85J-4671
955L s/n 85J4672-10128)
V3S8182 3S8182 Sprocket Bolt (D5, 953: 27 pieces) (955K/L: 29 pieces) (For CR3609 Segments)
V7H3607 7H3607 Sprocket Nut (D5, 953: 27 Pieces) (955K/L: 29 pieces) (For CR3609 Segments)
V3S6035 3S6035 Frame Wear Strip (4) D5
V7K1293 7K1293 Frame Wear Strip (4) D5B
V8K6084 8K6084 Idler Collar Wear Strip (4) 955K, 955L
V4M3067 4M3067 Frame Wear Strip (4) 955K, 955L
Page 99
V904400 Track Adjuster Seal Kit D5, 955
V9S8353 9S8353 Strip, Guiding Guard (2) D5
V7B3235 Bolt, Strip Mounting (20)
V3B4508 Lock washer (20)
V7K3703 7K3703 Strip, Guiding Guard (4) 955K, 955L
V7K3704 7K3704 Strip, Guiding Guard (2) 955K, 955L
V0S1595 0S1595 Bolt, Strip Mounting (24)
V5P8245 Washer (24)
V3K4254 3K4254 Strip, Guard Final Drive (2) 955K, 955L
V3B4510 3B4510 Lock washer, (10)
Page 100
MODEL: Caterpillar 953-HighLink, 953B, 953C
Specs: Pitch = 6.906", Link Ht = 109 mm, Bushing OD = 62.4
mm, Bolt = 5/8"
Serial Nos: 953: 77Y 1395 -Up (40 LK) 4-D/F Rollers, 8-S/F Rollers, 2- Carrier Rollers
953 LGP: 20Z424 Up (40 LK) 4-D/F Rollers, 8-S/F Rollers, 2- Carrier Roller
953 B: 5MK (40 LK) 4-D/F Rollers, 8-S/F Rollers, 2- Carrier Rollers
953 C: 2ZN (40LK) 4-D/F Rollers, 8-S/F Rollers, 2- Carrier Rollers

VCR4393/40/15 8E5280 Track Group, 40L, SALT, w/ SML, w/ 2 B 15" Shoe
VCR4393/4015V 8E5280 Track Group, 40L, SALT, w/ SML, w/ 2 B 15" Shoe (Optional)
VCR4393/4020V 8E5281 Track Group, 40L, SALT, w/ SML, w/ 2 B 20" Shoe (Optional)
Your Track Groups
VCR4396 7T4539 Track Link,, R.H.
Track Hardware
V7H3597 7H3597 Track Shoe Bolt, 5/8"
Track Shoes
VCR3726/14 8E4724 Shoe, 2 B 14"
VCR3726/15 8E4724 Shoe, 2 B 15"
VCR3726/20 8E4722 Shoe, 2 B 20"
Bottom Rollers
VCR4301 Roller Assembly, S/F With Bolt On Retainer (Qty 8) #1, 3, 4, 6
VCR4302 Roller Assembly, D/F With Bolt On Retainer (Qty 4) #2, 5
VCR4303 Roller Shell, S/F w/ bushings
VCR4304 Roller Shell, D/F w/ bushings
V9W7232 Seal Group
V1A8537 1A8537 Bolt, Roller Mounting
Page 101
"Only for 953 S/N 5Z, 20Z, 44Z1-485"
V8S9092 8S9092 Roller Mounting Bolt Series III (5/8) 953 Early
V6V3303 6V3303 Roller Mounting Bolt Series III (16mm) 953 Late
Carrier Rollers
VCR2881 5A8374 Carrier Roller Assembly (**For S/N 76Y, 77Y, 5Z & 20Z-3519 only) (Qty 2)
VCR2881V Carrier Roller Assembly (**For S/N 76Y, 77Y, 5Z & 20Z-3519 only) (Qty 2) (Optional)
VCR4799 6Y3908 Carrier Roller Assembly(**For 953 S/N 20Z3520-up, 5MK1-Up, 2ZN1-Up) (Qty 2)
VCR4799V Carrier Roller Assembly(Optional) (Qty 2)
Idlers
V953WBV Front Idler Complete 953 All
V953V Front Idler With Shaft, New Style Without O-Ring Groove In Shaft 953C 2nZ2608 Up
V1662121 166-2121 Idler Swing Link, New Style With O-Ring Groove
66 3
V1662123 66 3
166-2123 d e Swing
Idler S g Link,, New e Style
Sty e With
t O-Ring
O g Groove
G oo e
V1660613 166-0613 Idler Shaft, New Style With No O-Ring Grooves
VCR3189 Front Idler with Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z, 953B, 953C to
2NZ2608)
VCR3189V Front Idler with Shaft (Optional)
VCR3169 7T3501 Idler Shell
VCR2096 5K0305 Idler Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z, 953B, 953C to 2NZ2608)
VCR1467 3P8272 Bushing Assembly.
V3B8428 3B8428 Bolt, Idler Lock (2)
V3B4507 3B4507 Washer, Idler Lock (2)
Sprockets
VCR4408 Segment Group (9 Pieces 27 Teeth)**Same S/N as above plus; 953 S/N
76Y, 77Y, 78Y; 953LGP s/n 5Z, 20Z, 44Z
VCR4408V Segment Group (9 Pieces 27 Teeth)**Same S/N as above plus; 953 S/N
76Y, 77Y, 78Y; 953LGP s/n 5Z, 20Z, 44Z (Optional)
V6V0937 Sprocket Bolt (27 pieces per side)
V7H3607 Sprocket Nut (27 pieces)
VCR5975 6Y3242 Segment Group (9 pieces 27 Teeth) 953C
VCR5975V 6Y3242 Segment Group (9 pieces 27 Teeth) 953C (Optional)
V1178509 Sprocket Bolt (27 pieces per side)
V8T1757 Sprocket Nut (27 pieces per side)
V7P7333 7P7333 Track Adjuster Seal
V7P7208 7P7208 Wear Strip, Guiding Guard Front Early Model (4)
V8G6927 8G6927 Wear Strip, Guiding Guard Rear Early Model (4)
Page 102
V0S1621 5P2288 Bolt, Wear Strip (36) 5/8"
V8Y1853 8Y1853 Wear Strip, Guiding Guard Front Late Model (4)
V3W8536 3W8536 Wear Strip, Guiding Guard Rear Late Model (4)
V8T4139 8T4139 Bolt, Wear Strip (32) 12mm
V5P8245 8T4223 Washer, Wear Strip (32)
Page 103
MODEL: Caterpillar D5H, D5HLGP, D5HTSK, 953C
Hybrid
Specs: Pitch = 7.484", Link Ht = 110 mm, Bushing OD = 64.5
mm, Bolt = 5/8"
Serial Nos: D5H:7NC -up, 8RC -Up (37 LK)
D5H LGP: 9HC-Up, 1DD-Up (46 LK)
D5H TSK: 7EG-Up (42 LK)
D5H Fine Grader: 1DD, 9HC (47 LK)
953 C Hybrid: BBX (37LK) 4-D/F Rollers, 8-S/F Rollers, 2- Carrier Rollers
Lubricated Chains Component Parts are Interchangeable with

ITM/Sorefa Only
VCR5232/37/22 p, 37L,, SALT,, w/ SML,, w/ 1 B 22" Shoe
Track Group,
VCR5232/46/34 9W9948 Track Group, 46L, SALT, w/ SML, w/ 1 B 34" Shoe
Your Track Groups
VCR4807/37 Pin and Bushing Group, 37 LK **For ITM/Sorefa Track Chain Only**
VCR4808/37 6Y3880 Bushing & Seal Group 37 LK **For ITM/Sorefa Track Chain Only**
VD5HDRY/46V Pin and Bushing Group, 46 LK (Optional) V-Track Chain Only
VCR4809 6Y0929 Salt Bushing
Track Hardware
Page 104
V3T8601 3T8601 Master Link Bolt -Short (2 each)
V3T8580 3T8580 Master Link Bolt -Long (2 each)
Track Shoes
VCR4392/18 3T8597 Shoe, 1 B 18"
VCR4392/20 3T8586 Shoe, 1 B 20"
VCR4392/22 8E9823 Shoe, 1 B 22"
VCR4392/24 8E9821 Shoe, 1 B 24"
VCR4392/28 Shoe, 1 B 28"
VCR4392/34 3T8590 Shoe, 1 B 34"
Note: No master shoes required on D5H track groups
230-7268 Shoe, 2 B 15" (953C Hybrid)
230-7177 Shoe, 2 B 20" (953C Hybrid)
Bottom Rollers
VCR4301 Roller Assembly, S/F With Bolt On Retainer
VCR4302 Roller Assembly, D/F With Bolt On Retainer
V9W7232 Seal Group
V1B4367 1B4367 Bolt 5/8 X 3
V6V3303 6V3303 Roller Mounting Bolt Series III (16mm) D5H, D6M Late
N/A 129-2978 Roller Assembly D/F Series III Note: For TSK model only (3/4" Mounting Bolt Hole)
N/A 129-2977 Roller Assembly S/F Series III Note: For TSK model only (3/4" Mounting Bolt Hole)
V1D4610 1D4610 Bolt (3/4" X 3.1/4")
V5P8248 5P8248 Washer (3/4")
Carrier Rollers (953 LGP; D5HXL; D5HLGP & D5H-TSK)
VCR4799 6Y3908 Carrier Roller Assembly (D5HLGP s/n 1DD1-up, 9HC252-up, 2SD-up
4KD-up; D5H-TSK s/n 7EG-up)
Idlers
VCR4589 6T1764 Idler with Shaft (D5H s/n 1DD-up, 3MD-up, 1YD-up, 8SC-up, 7NC-up, 8RC-up;
VCR4589V 161-7549 Idler with Shaft ,Symmetrical Seal (Optional)
VCR5234 8E4007 Idler Group-Heavy Duty-Skidders Only (No Longer Available From ITM)
VCR4590 Idler Shell with Bushings D5 / D5H LGP Front and Rear(S/N-same as above)
V6T3285 6T3285 Idler Shaft
V9W7232 Seal Group
V953WBV Front Idler Complete 953C Hybrid ONLY (See 953C above for breakdown)
Sprockets
VCR4883 Segment Group (D5H s/n 7NC-up, 8RC-up, 8SC-up,1YD-up (5 pieces 23 Teeth)
3MD-up; D5HLGP s/n 9HC-up, 1DD-up, 2SD-up)
V2S5658 2S5658 Washer (23 pieces per side)
Page 105
V6V0937 6V0937 Sprocket Bolt (23 pieces per side)
197-9672 Sprocket Segment (5 piece) 953C Hybrid Only
196-4672 Segment Nut (25 pieces per side) 953C Hybrid Only
197-9674 Segment Bolt (25 pieces per side) 953C Hybrid Only
V8G4945 8G4945 Track Adjuster Seal
V8Y1198 8Y1198 Wear Strip, Guiding Guard (4)
V0S1621 5P2228 Bolt, Wear Strip(24)
Page 106
MODEL: Caterpillar D5H, D5HXL, D5HLGP, D5H
SKIDDER HEAVY DUTY, 953C HD SALT
Specs: Pitch = 7.50", Link Ht = 119 mm, Bushing OD = 65
mm, Bolt = 3/4"
Serial Nos: D5H: 7NC5525-Up, 8RC5890-Up, 1YD5522-Up, 3MD5598-Up(37LK)12 B/R
D5H XL: 8RJ4217-Up (39 LK) 14 Roller
D5H LGP: 1DD5879-Up, 9HC5520-Up, 2SD5552-Up, 4KD5588-Up (46 LK)
D5H Skidder;7EG1113-Up (42LK)
D5H Fine Grader: (47LK)
953C BBX-up: (37LK) Heavy Duty SALT TRACK
Lubricated Chains & Track Groups

V1061635 106-1635 Chain, 37L, SALT, w/ SML
V1061635V 106-1635 Chain, 37L, SALT, w/ SML (Optional)
VCR5469/37/20 106-1644 Track Group, 37L, SALT, w/ SML, Heavy Duty, w/ 1 B 20" Shoe
VCR5469/3720V 106-1644 p 37L, SALT, w/ SML, Heavyy Duty,
Track Group, y w/ 1 B 20" Shoe ((Optional)
p )
VCR5469/37/22 Track Group, 37L, SALT, w/ SML, Heavy Duty, w/ 1 B 22" Shoe
VCR5469/3924V 106-1649 Track Group, 39L, SALT, w/ SML, Heavy Duty, w/ 1 B 24" Shoe (Optional)
VCR5469/4024V Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 20" Shoe (Optional)
VCR5469/4624V Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 24" Shoe (Optional)
VCR5509/37 Pin and Bushing Group, 37 LK ***Note: Not interchangeable with OEM chains ***
VCR5508/39 Bushing and Seal Kit, 39LK ***Note: Not interchangeable with OEM chains ***
VCR5466/39 Bushing Group 39LK ** For OEM chains only **
V1061627 Master Link Complete, R.H. (2 pieces)
Page 107
V1061628 Master Link Complete, L.H. (2 pieces)
VCR5465V VLSD5HHDV Link Segment (V-Track)
VCR5442 Salt Pin
V1061618 Salt Bushing ** For OEM chains only **
VCR5446 Thrust Ring
VCR5447 Seal Assembly (Sorefa Type)
Pin & Bushing Groups (**For OEM Track Chain**)
VCR5507/39 Pin and Bushing Group, 39 LK (OEM Track Chain Only)
V1061618 Salt Bushing ** For OEM chains only **
Track Hardware
V6V1792 Track Shoe Bolt (3/4")
V1070719 Master Link Bolt -Long (2 each)
V1061642 Master Link Bolt -Short (2 each)
Track Shoes (3/4" Bolt Hole)
VCR5450/20 106-1604 Shoe, 1 B 20"
VCR5450/20V 106-1604 Shoe, 1 B 20" (Optional)
VCR5451/20 106-1612 Shoe, Master, 1 B 20"
VCR5451/20V 106-1612 Shoe, Master, 1 B 20" (Optional)
VCR5450/22 106-1607 Shoe, 1 B 22"
VCR5451/22 106-1613 Shoe Master, 1 B 22"
VCR5451/22V 106-1613 Shoe Master, 1 B 22" (Optional)
VCR5450/24 117-0615 Shoe, 1 B 24"
VCR5451/24 117-0616 Shoe Master, 1 B 24"
VCR5450/28 106-1602 Shoe, 1 B 28"
VCR5451/28 106-1615 Shoe Master, 1 B 28"
VCR5450/34 106-1605 Shoe, 1 B 34"
VCR5451/34 106-1616 Shoe Master, 1 B 34"
187-2005 Shoe, 2 B 15"
187-2006 Shoe Master, 2 B 15"
187-2003 Shoe, 2 B 20"
187-2004 Shoe Master, 2 B 20"
Bottom Rollers
V1B4367 1B4367 Bolt 5/8 X 3
V9W7232 Seal Group
V0S1625 0S1625 Roller Mounting Bolt Series III (5/8 X 2.1/2)
Page 108
V6V3303 6V3303 Roller Mounting Bolt Series III (16mm) D5H, D6M Late
V9W7216 Seal Group
Carrier Rollers ( D5HXL; D5HLGP & D5H-TSK)
VCR4799 Carrier Roller Assembly (D5HLGP s/n 1DD680-up, 9HC252-up, 2SD-up
4KD-up; D5H-TSK s/n 7EG-up)
VCR2831 Carrier Roller Shell
V9W6647 Seal Group
Idlers
VCR4589 Idler with Shaft (D5H s/n 3MD-up, 1YD-up, 8SC-up, 7NC-up, 8RC-up;
D5HLGP s/n 9HC-up, 1DD-up, 2SD-up, 4KD-up; D5HTSK s/n 7EG-71)
VCR4589V Idler with Shaft (Optional)
VCR5234 Idler Group-Heavy Duty-Skidders Only (No Longer Available From ITM)
VCR4590 Idler Shell with Bushings D5 / D5H LGP Front and Rear(S/N-same as above)
V9W7232 Seal Group
VCR4405 Bushing
V953WBV Front Idler Complete 953C "BBX" HD SALT ONLY (See 953C above for breakdown)
Sprockets- **For Non-Skidders Only **
VCR5513 Segment Group (D5H HEAVY DUTY ONLY) (5 pieces 23 Teeth)-Do not use for TSK
VCR5513V Segment Group (D5H HEAVY DUTY ONLY) Do not use for TSK (Optional)
V2S5658 Washer (23 pieces per side)
V7H3607 Sprocket Nut (23 pieces per side)
197-9672 Sprocket Segment (5 piece) 953C "BBX" HD SALT Only
196-4672 Segment Nut (25 pieces per side) 953C "BBX" HD SALT Only
197-9674 Segment Bolt (25 pieces per side) 953C "BBX" HD SALT Only
V8G4945 8G4945 Track Adjuster Seal
V0S1621 5P2228 Bolt, Wear Strip(24)
Page 109
MODEL: Caterpillar D6, D6B, 951, 951B, 955E, 955F,
955H
53.975 mm, Bolt Diameter = 5/8"
Serial Nos: D6: 8U, 9U, 31A, 32A, 4R, 5R (40 LK) (Convert to 5/8" bolt hole, not 9/16")
D6B: 37A, 44A, 56A, 57A, 37H, 38H (40 LK)

951: 89A, 92A, 63K (40 LK)
951B: 15F1 up, 32F1-901, 69H1-1868, 79H, 72J, 78J, 86J1-1991 (40Lk)
955E: 12A6135 up, 26A (38 LK)
955F: 45A, 51A (40 LK)
955H: 60A, 72A, 77A, 93A (40 LK)

VCR1998/37 Chain, 37L, Sealed, w/ Master Pin (**Same as CR2006/xx w/seal washers)
VCR2109/40/14 7K3067 Track Group, 40L, Sealed, w/ Master Pin, w/ 3 B 14" Shoe
Your Track Groups
VCR2625/40 Pin and Bushing group, 40 LK
VCR2625/45 Pin and Bushing group, 45 LK
VCR255 Sealed Pin
VCR1606 Seal Washer
VCR1605 Master Pin
VCR1607 Spacer
Track Shoes
VCR3242/16 4S7656 Shoe, 1B 16"
VCR3242/20 5S0822 Shoe, 1B 20"
VCR3242/20V 5S0822 Shoe, 1B 20" (Optional)
VCR3242/22 5S0823 Shoe, 1B 22"
VCR3242/22V 5S0823 Shoe, 1B 22" (Optional)
VCR3242/24 Shoe, 1B 24"
VCR3242/24V Shoe, 1B 24" (Optional)
Track Hardware
V7H3597 Track Shoe Bolt (5/8")
Bottom Rollers
Page 110
VCR1292V D5 ROLLER GRP S/F (7K8572) Optional
VCR1293 118-1612 Roller Assembly, D/F
VCR1293V D5 ROLLER GROUP D/F (7K8571) Optional
V9W7216 Seal Group
V8S5796 Bushing
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
V8S9092 8S9092 Roller Mounting Bolt (57mm long)
W h
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR3188 Front Idler with Shaft D6 s/n 8U10971-up, 9U29219-up;
D6B s/n 37A, 44A, 56A, 57A, 37H, 38H; 951 s/n 89A-170; 955E s/n 12A7686-up,
955F s/n 45A, 51A; 955H s/n 60A-7503, 72A-905, 77A-211
VCR3169 Idler Shell
V9W7216 Seal Group
V8S5796 Bushing
VCR1468 5M1913 Front Idler Shaft-Use with CR3188 ONLY
V7F2022 7F2022 Taper Pin, Shaft Lock
V6B6684 6B6684 Nut
VCR3190 Front Idler Group Complete (951 s/n 89A171-up, 91A, 63K; 951B/C s/n 15F, 32F
VCR3190V 69H, 79H, 72J, 78J, 86J; 955H s/n 60A7504 up, 72A906 up, 77A212 up, 93A
VCR3189 Front Idler with Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z)
VCR3189V Front Idler with Shaft (953 s/n 76Y, 77Y & 78Y; 953LGP 5Z, 20Z & 44Z) (Optional)
Page 111
V3B8428 3B8428 Bolt, Idler Lock
Sprockets
VCR1819 Sprocket Rim (D6,D6B) (28 Teeth)
VCR1447 Sprocket Rim (955E) (27 Teeth)
VCR2050 Sprocket Rim (951, 951B, 955F) (30 Teeth) (79H, 86J1-1991)
VCR1451 Sprocket Rim (955H) (30 Teeth)
VCR1818 8M6041 Sprocket (For D6, D6B Models)
V904400 Track Adjuster Seal Kit (2) (S/N 8U1085-Up, 9U28328-Up)
V8K6084 8K6084 Idler Collar Wear Strip (4) 951B, 955H
V8M6689 8M6689 Frame Wear Strip (4) D6B
V4K4780 4K4780 Frame Wear Strip (4) 951B, 955H
V9S8245 9S8245 Strip, Guiding Guard (3) D6B
V9S8246 9S8246 Strip, Guiding Guard (3) D6B
V7B3235 Bolt, Strip Mounting (20)
V3B4508 Lock washer (20)
V7K3703 7K3703 Strip, Guiding Guard (4) 951B
V7K3704 7K3704 Strip, Guiding Guard (2) 951B
V5P8245 Washer (24)
Page 112
MODEL: Caterpillar D6C,D6C LGP,D6D, D6D LGP, 955L,
963 (old), 963 LGP (old), 235
Specs: Track Pitch = 7.984", Link Height = 128mm, Bushing
O.D. = 66.7mm Bolt Hole = 3/4"
Serial Nos: D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J1-196, 47J1-398, 55J,
56J,17R, 69U, 69J1-257, 99J1-336,
D6C: 10K1-929, 26K1-263 (36 LK)
D6C: 46J197 -Up, 47J399 -Up, 69J258 -Up, 99J 337 -Up, 10K930 -Up,
26K264 -Up, 23U (36 LK)
D6C LGP: 90B1 -Up, 69U1 -Up, 49W1 -Up (41 LK)
D6D: 3X, 4X, 19X, 20X, 30X, 31X, 74W1-1148, 75W1-1796 (36 LK)
D6D LGP: 6X, 32X, 33X (41 LK)
955L: 85J10129 -Up, 64J10441 -Up, 71J6181 -Up, 13X, 8Y, 57M (36 LK)
963: 29S1-1126, 6Z1-1555, 18Z1-1352 (37 LK)

963 LGP: 11Z1-672, 21Z1-318, 48Z1-185 (37 LK)

VCR3176/36 Chain, 36L, Sealed, w/ Master Pin Bush OD(66.67mm) (Reference AT64400AM)
VCR3176/37 Chain, 37L, Sealed, w/ Master Pin Bush OD (66.67mm)
VCR3177/36/24 p, 36L,, Sealed,, w/ Master Pin,, w/ 1 B 24" Shoe
Track Group,
VCR3177/41/36 6P7542 Track Group, 41L, Sealed, w/ Master Pin, w/ 1 B 36" Shoe
VCR3696/36/20 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 20" ESS Shoe
VCR3180/47/28 Track Group, 47L, Sealed, w/ Master Pin, w/ 3 B 28" Shoe (235)
Your Track Groups
VCR1790/36 Pin and Bushing Group, 36 LK Master Pin Type
VLSD6CDRY Link Segment (USE for 0363D0M1 & 106B1 link casting number)
VCR3176P Link Segment (USE for PRO6, 0363DOM & 106K link casting number)
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR3307/36 AT64400AM1 Chain, 36L, Sealed, w/ SML( Bush OD=66.67mm)
Page 113
VCR3307/36V AT64400AM1 Chain, 36L, Sealed, w/ SML( Bush OD=66.67mm) (Optional)
VCR3307/37 Chain, 37L, Sealed, w/ SML(Bush. OD=66.67mm)
VCR3311/36/24 Track Group, 36L, Sealed, w/,SML, w/ 1 B 24" Shoe
VCR3697/36/18 Track Group, 36L, Sealed, w/ SML, w/ 1 B 18" ESS Shoe
VCR3328/36/17 1V9497 Track Group, 36L, Sealed, w/ SML, w/ 2 B 17" Shoe (Ref. AT64405AM1)
Your Track Groups
VCR3312/36 Pin and Bushing Group, 36LK-SML Type
VCR1790/36 Pin and Bushing g Group,
p, 36 LK- Master Pin Type
yp
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR3309/36 117-1018 Chain, 36L, SALT, w/ SML (Bush OD=69.8mm) (Reference AT70783AM)
VCR3309/36V 117-1018 Chain, 36L, SALT, w/ SML (Bush OD=69.8mm) (Reference AT70783AM) (Optional)
VCR3309/37 Chain, 37L, SALT, w/ SML (Bush OD=69.8mm) (Reference AT70785AM)
VCR3310/41/36 Track Group, 41L, SALT, w/,SML, w/ 1 B 36" Shoe
VCR3327/36/17 1V8054 Track Group, 37L, SALT, w/ SML, w/ 2 B 17" Shoe 963
VCR3327/37/18 Track Group, 37L, SALT, w/ SML, w/ 2 B 18" Shoe 963
VCR3701/37/18 Track Group, 37L, SALT, w/ SML, w/ 3 B 18" Shoe 963
Page 114
VCR3698/36/18 Track Group, 36L, SALT, w/ SML, w/ 1 B 18" ESS Shoe
Your Track Groups
VCR3319 Salt Pin
VCR3321 Ring
VCR4267/41 Chain, 41L, SALT
VCR4416/36/20 Track Group, 36L, SALT, Proline Rail, w/ SML, w/ 1 B 20" Shoe (D6D)
VCR4416/3620V Track Group, 36L, SALT, Proline Rail, w/ SML, w/ 1 B 20" Shoe (D6D) (Optional)
VCR4416/37/24 Track Group, 37L, SALT, Proline Rail, w/ SML, w/ 1 B 24" Shoe
VCR4416/3724V Track Group, 37L, SALT, Proline Rail, w/ SML, w/ 1 B 24" Shoe (Optional)
VCR4416/39/24 Track Group, 39L, SALT, Proline Rail, w/ SML, w/ 1 B 24" Shoe (D6)
VCR4416/41/36 Track Group, 41L, SALT, Proline Rail, w/ SML, w/ 1 B 36" Shoe (D6C-LGP)
VCR4416/4136V Track Group, 41L, SALT, Proline Rail, w/ SML, w/ 1 B 36" Shoe (D6C-LGP) (Optional)
VCR4417/36/20 Track Group, 36L, SALT, Proline Rail, w/ SML, w/ 1 B 20" ESS Shoe
VCR4417/3620V Track Group, 36L, SALT, Proline Rail, w/ SML, w/ 1 B 20" ESS Shoe (Optional)
VCR4415/37/18 7T4652 Track Group, 37L, SALT, Proline Rail, w/ SML, w/ 2 B 18" Shoe
VCR4415/3718V 7T4652 Track Group, 37L, SALT, Proline Rail, w/ SML, w/ 2 B 18" Shoe (Optional)
Your Track Groups
VCR5473/39 Pin & Bushing Group 39 LK (For Bushing Diameter 72.7mm)
Page 115
VCR3313/36 Pin and Bushing Group, 36 LK (Can Use When Replacing Pins and Bushings on CR4267
Chains)
Chains)
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
V9S1838 Master Link Bolt, 3/4"
Track Shoes
VCR2084/18 Shoe, 1 B 18"
VCR2084/20 6Y6291 Shoe, 1 B 20"
VCR2084/20V 6Y6291 Shoe, 1 B 20" (Optional)
VCR3323/20 6Y6292 Shoe, Master, 1 B 20"
VCR3323/20V 6Y6292 Shoe, Master, 1 B 20" (Optional)
VCR2084/22 6Y6293 Shoe, 1 B 22"
VCR2084/22V 6Y6293 Shoe, 1 B 22
22" (Optional)
VCR2084/24 6Y6295 Shoe, 1 B 24"
VCR2084/26 Shoe, 1 B 26"
VCR2084/28 Shoe, 1 B 28"
VCR2084/30 6Y6299 Shoe, 1 B 30"
VCR2084/32 Shoe, 1 B 32"
VCR2084/36 6Y6301 Shoe, 1 B 36"
VCR3694/18 Shoe, 1 B 18" ESS
VCR3695/18 Shoe, Master, 1 B 18" ESS
VCR3694/20 6Y6395 Shoe, 1 B 20" ESS
VCR3695/20 6Y6394 Shoe, Master, 1 B 20" ESS
VCR3695/20V 6Y6394 Shoe, Master, 1 B 20" ESS (Optional)
VCR3694/22 6Y6411 Shoe, 1 B 22" ESS
VCR3694/22V 6Y6411 Shoe, 1 B 22" ESS (Optional)
Page 116
VCR3694/24 6Y6398 Shoe, 1 B 24" ESS (Reference 7S9562)
VCR3694/24V 6Y6398 Shoe, 1 B 24" ESS (Reference 7S9562) (Optional)
VCR3694/26 Shoe, 1 B 26" ESS
VCR3694/28 Shoe, 1 B 28" ESS
VCR3694/30 Shoe, 1 B 30" ESS
VCR3694/36 Shoe, 1 B 36" ESS
VCR3695/36V Shoe, Master, 1 B 36" ESS (Optional)
VCR3324/17 8E4501 Shoe, 2 B 17" 955L
VCR3325/17 8E4502 Shoe, Master, 2 B 17" 955L
VCR3324/18 8E4494 Shoe, 2 B 18" 963
VCR3324/18V 8E4494 Shoe, 2 B 18" 963 (Optional)
VCR3325/18 8E4495 Shoe, Master, 2 B 18" 963
VCR3325/18V 8E4495 Shoe, Master, 2 B 18" 963 (Optional)
VCR3324/20 Shoe, 2 B 20"
VCR3324/22 8E4496 Shoe, 2 B 22"
VCR2298/18 2V5114 Shoe, 3 B 18"
VCR2298/28 Shoe, 3 B 28"
Bottom Rollers
Check Bolt Hole on Bracket First; Call Us with Questions
VCR1793 118-1614 Roller Assembly, S/F (5/8" bracket bolt hole)
VCR1793V 118-1614 Roller Assembly, S/F (5/8" bracket bolt hole) (Optional)
VCR1792 118-1615 Roller Assembly, D/F (5/8" bracket bolt hole)
VCR1792V 118-1615 Roller Assembly, D/F (5/8" bracket bolt hole) (Optional)
VCR1797 9G8027 Roller Shell, S/F
VCR1798 9G8032 Roller Shell, D/F
VCR3636 7G0419 Shaft
VCR1656 7M5110 Key
VCR399 4F0262 End Collar Lock
VCR3631 7G0417 End Collar-Inner (3/4" bracket bolt hole)
VCR3632 7G0418 End Collar-Outer (3/4" bracket bolt hole)
V1D4608 Roller Mounting Bolt (3/4 bracket hole)
V5P8248 Mounting Washer
VCR1804 End Collar-Inner (5/8" bracket bolt hole)
VCR1805 End Collar-Outer (5/8" bracket bolt hole)
V1A8537 1A8537 Roller Mounting Bolt 5/8"
V5P8247 5P8247 Mounting Washer
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V5M4443 Snap Ring
Page 117
Extended-Wear Life Rollers
V8E2025TH 118-1635 Extended Wear Life Roller Assembly, S/F 3/4 Hole
V8E2024TH 118-1634 Extended Wear Life Roller Assembly, D/F 3/4 Hole
V9W5408TH 9W5408 Extended Wear Life Roller Shell, S/F
V9W5411TH 9W5411 Extended Wear Life Roller Shell, D/F
Bottom Rollers-All-Weather
V9G8029AR Roller Assembly, S/F 3/4 Hole
V9G8034AR Roller Assembly, D/F 3/4 Hole
Carrier Rollers
V9W6647 Seal Group
VCR2933 Collar Assembly
D6C, D6D, 955 Idlers
VCR4094 Front Idler with Bearing Blocks
D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J,17R, 69U, 69J, 99J,
10K, 26K, 23U, 24U
D6C: 46J197 up, 47J399 up, 69J258 up, 99J 337 up, 10K930 up, 26K264 up, 23U , 24U,
D6C LGP: 90B, 69U, 49W
D6D: 3X, 4X, 19X, 20X, 30X, 31X, 74W, 75W, D6D LGP: 6X, 32X, 33X
955L: 85J10129-Up, 13X1-Up, 8Y-1943-Up
VCR4094V Front Idler with Bearing Blocks (Optional)
VCR1834 5M5009 Idler Shell
VCR1835 5M5005 Shaft
V8S5349 8S5349 Bushing
VCR1836 3P1900 Bushing Assembly
V1D4556 1D4556 Bolt, Idler Lock
V3B4507 3B4507 Washer
V7M1857 7M1847 Shim, Top Bracket (12 AR)
V7M1848 7M1848 Shim, Side Plate (48 AR)
V5F8000 5F8000 O-ring, Bushing
V1S8947 1S8947 O-ring, Shaft
V7M1850 7M1850 Idler Collar Wear Strip
V4F5004 4F5004 Spring Rubber Coated (8)
V7M1845 7M1845 Plate Assy, Wear under Idler Bracket (4)
V5L4398 5L4398 Bolt, Spring (8)
963 Idlers
VCR4007WBV Front Idler with Swing Links (with 8Y2203 & 8Y2204 links) Can be used on early s/n by
removing 3W8403 sleeve on stub shaft
VCR1834 Idler Shell
VCR3990 9G1450 Idler Shaft
V9W7235 Seal Group
Page 118
V8S5349 Bushing
V1H6227 1H6227 O-ring, Bushing
V5M5000 5M5000 Lock, Idler
V4K9943 4K9943 Washer
V8G0989 8G0989 Front Idler Swing Link, L.H. (For Early Model) (2)
V8G0990 8G0990 Front Idler Swing Link, R.H. (For Early Model) (2)
V0S1573 0S1573 Swing Link Mounting Bolt 1/2 X 4
V3W8403V Swing Link Bushing (For Jinsung Brand Only)
V8T4176 8T4176 Swing Link Mounting Bolt 12mm X 1.75 X 90mm C4202
V8T4122 8T4122 Swing Link Mounting Washer (For Jinsung Brand Only)
Sprockets
VCR1844 Sprocket Rim (Can be used for 235 Exc 32K1-1300 & 64R 1 up)(25 Teeth)
D6C: 41A, 71A, 73A, 74A, 76A, 82A, 83A, 96A, 46J, 47J, 55J, 56J,17R, 69U
69J, 99J, 10K, 26K, 46J, 47J, 69J, 99J, 10K, 26K, 23U, D6C LGP: 90B, 69U, 49W, D6D:
3X, 4X, 19X, 20X, 30X, 31X, 74W, 75W
D6D LGP: 6X, 32X, 33X, 6HC
VCR3330 8E4365 Segment Group D6C, D6D, D6DLGP**(SAME S/N AS ABOVE) (25 Teeth) (5 pcs)
VCR3330V 8E4365 Segment Group D6C, D6D, D6DLGP**(SAME S/N AS ABOVE) (25 Teeth) (Optional)
V3S8182 Sprocket Bolt (5/8" X 1 7/8") (20 pieces per side)
Extended-Wear Life Segments
VCR5476 117-1616 Extended Wear Life Segments (For D6D S/N: 6HC) 3/4" Bolt Hole
117-1617 Segment Bolt
V7H3608 Segment Nut
V901405 Track Adjuster Seal Kit (For Old Cat 235 Model)
V9S8245 9S8245 Strip, Guiding Guard (3) D6C, D
V9S8246 9S8246 Strip, Guiding Guard (3) D6C, D
V7B3235 7B3235 Bolt, Strip Mounting (20)
V8M6689 8M9969 Frame Wear Strip (4) D6C, D, 955L
V7K3703 7K3703 Strip Guiding Guard (4)
V7K3704 7K3704 Strip Guiding Guard (2)
V5K8454 Bolt, Guiding Guard (32)
V7P6570 7P6570 Strip, Guiding Guard (3) 963
V0S1589 0S1589 Bolt (12)
V5P8247 5P8247 Washer (12)
Page 119
MODEL: Caterpillar 963-HighLink
Specs: Pitch = 8", Link Ht = 128mm, Bushing OD = 72.9mm,
Serial Nos: 963: 29S 1127 up, 6Z 1556 up, 18Z 1353 up (37 LK) 6-S/F Rollers, 6-D/F
963 LGP: 11Z 673 up, 21Z 319 up, 48Z 186 up (37 LK) 6-S/F Rollers, 6-D/F

Your Track Groups
VCR5473/39 Pin & Bushingg Group p 39 LK ((For Bushing
g Diameter 72.7mm))
Chains)
VCR3319 Salt Pin
VCR3321 Thrust Ring
V1528071 152-8071 Thrust Ring - For use with OEM Link 228-2735 RH & 228-2736 LH
V2070544 207-0544 Seal Assembly - For use with OEM Link 228-2735 RH & 228-2736 LH
VCR3685 6Y0473 Plug - For use with OEM Link 228-2735 RH & 228-2736 LH
VCR3620 5G2247 Stopper - For use with OEM Link 228-2735 RH & 228-2736 LH
Track Hardware
Track Shoes
VCR3324/17 8E4501 Shoe, 2 B 17"
VCR3324/18 8E4494 Shoe, 2 B 18"
VCR3325/18V 8E4495 Shoe, Master, 2 B 18"(Optional)
VCR3324/20 Shoe, 2 B 20"
Page 120
VCR3324/22 8E4496 Shoe, 2 B 22"
Bottom Rollers
963: (s/n 29S 1061 up, 6Z 450 up, 18Z 1353 up) 963 LGP:(s/n 11Z 673 up, 21Z 319 up, 48Z
186 up)
VCR4297 Roller Assembly W/Shaft, S/F (Qty 6) #1, 4, 6
VCR4298 Roller Assembly W/Shaft, D/F (Qty 6) # 2, 3, 5
VCR4446
V9W6649 Seal Group
VCR4517 Cap
V1D4610 Roller Mounting Bolt
V5P8248 Mounting Washer
V1D4608 1D4608 Mounting Bolt For 1205746X & 1205766X (3/4 X 2.75)
V6V5845 6V5845 Mounting Bolt For 1205746X & 1205766X (20mm X 2.50 X 70mm)
V8T3282 8T3282 Mounting Washer For 1205746X & 1205766X (20mm)
Carrier Rollers
VCR2650 Carrier Roller Assembly (Ser. # 6Z, 11Z, 18Z, 21Z1-3441)
VCR2650V Carrier Roller Assembly (Ser. # 6Z, 11Z, 18Z, 21Z1-3441) (Optional)
VCR4800 Carrier Roller Assembly (Ser. # 21Z3442-UP)
V9W6647 Seal Group
Idlers
VCR4007WBV Front Idler with Swing Links (with 8Y2203 & 8Y2204 links) Can be used on early s/n by
removing 3W8403 sleeve on stub shaft
VCR1834 Idler Shell
VCR3990 9G1450 Idler Shaft
V9W7235 Seal Group
V8S5349 Bushing
V1H6227 1H6227 O-ring, Bushing
V5M5000 5M5000 Lock, Idler
V8G0989 8G0989 Front Idler Swing Link, L.H. (For Early Model) (2)
V8G0990 8G0990 Front Idler Swing Link, R.H. (For Early Model) (2)
V0S1573 0S1573 Swing Link Mounting Bolt 1/2 X 4
V8Y2203 8Y2203 Front Idler Swing Link ,L.H. For Current Model (2)
V8Y2204 8Y2204 Front Idler Swing Link, R.H. For Current Model (2)
V3W8403V Swing Link Bushing (For Jinsung Brand Only)
V8T4176 8T4176 Swing Link Mounting Bolt 12mm X 1.75 X 90mm (For Jinsung Brand Only)
V8T4122 8T4122 Swing Link Mounting Washer (For Jinsung Brand Only)
Sprockets
VCR3330V Segment Group (Group consists of 5 pieces total per side) (25 Teeth) (Optional)
Page 121
V903400 Track Adjuster Seal Kit (2) S/N: 18Z1-1751, 21Z1-654, 48Z1-277
V903401 Track Adjuster Seal Kit (2) S/N: 18Z1752-Up, 21Z655-3441, 48Z278-Up
V7P6570 7P6570 Strip, Guiding Guard (3) 963
V0S1589 0S1589 Bolt (12)
V5P8247 5P8247 Washer (12)
Page 122
Specs: Pitch = 7.984", Link Ht = 125 mm, Bushing OD = 73
Serial Nos: D6H: 8KB, 7PC, 1FJ, 4LG, 4RC1-5652, 3ZF, 4YF, 4GG, 1KD, 2KD, 3ED,
6CF (39 LK) 8-S/F Rollers, 4-D/F Rollers
D6H LGP: 6FC, 8FC, 8YC, 3YG1-04289, 2TG, 5HF (45 LK) 8-S/F Rollers, 8-
D/F Rollers, 2-Carrier Rollers
D6H: Extended Roller Frame(40 LK)
D6H XL:8ZJ1-320, 9KJ1-620, 8SK1-5499, 9LK1-457, 9RK1-5499 (41 LK) 8-
S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers

VCR4810/39 8E4326 Chain, 39L, SALT, w/ SML (OEM Reference # 6Y3519)
VCR4810/39V 8E4326 Chain, 39L, SALT, w/ SML (OEM Reference # 6Y3519) (Optional)
VCR4810/40 8E4327 Chain, 40L, SALT, w/ SML (OEM Reference # 6Y3520)
VCR4810/40V 8E4327 Chain, 40L, SALT, w/ SML (OEM Reference # 6Y3520) (Optional)
VCR4810/41 9U9062 Chain, 41L, SALT w/ SML
VCR4810/41V 9U9062 Chain, 41L, SALT w/ SML (Optional)
VCR4812/39/20 6T8205 Track Group, 39L, SALT, w/ SML, w/ 1 B 20" ESS Shoe
VCR4812/39/22 9W3974 Track Group, 39L, SALT, w/ SML, w/ 1 B 22" ESS Shoe
VCR4811/40/22 7T9971 Track Group, 40L, SALT, w/ SML, w/ 1 B 22" 22 Shoe
VCR4812/40/20 9W2181 Track Group, 40L, SALT, w/ SML, w/ 1 B 20" ESS Shoe
Your Track Groups
VCR4813/39 Pin and Bushing Group, 39Lk
VD6HDRY/46V Pin and Bushing Group, 45Lk (Optional) V-Track Chain Only
VCR3319 Salt Pin
VCR4438 Thrust Ring
V6Y6473 Seal Assembly
VCR3433 Plug Assembly For Sorefa Chains
Track Hardware
V6V1793 Master Link Bolt, Short (2 needed)
Page 123
V9S1838 Master Link Bolt, Long (2 needed)
Track Shoes
V-Track Chain Require "Master Shoe" (ITM CHAIN DO NOT REQUIRE MSTR SHOE)
VCR4442/18 Shoe, 1 B 18"
VCR4442/20 6Y6285 Shoe, 1 B 20"
VCR4442/22 6Y6286 Shoe, 1 B 22"
VCR4442/24 6Y6287 Shoe, 1 B 24"
VCR4442/26 Shoe, 1 B 26"
VCR4442/30 6Y8973 Shoe, 1 B 30"
VCR4442/36 6Y6288 Shoe, 1 B 36"
VCR4443/18 Shoe, 1 B 18" ESS
VCR3695/18 Shoe,
Shoe Master,
Master 1 B 18
18" ESS
VCR4443/20 6Y6391 Shoe, 1 B 20" ESS
VCR4443/22 6Y6389 Shoe, 1 B 22" ESS
VCR4443/24 1Q4930 Shoe, 1 B 24" ESS
VCR4443/24V 1Q4930 Shoe, 1 B 24" ESS (Optional)
VCR4443/26 Shoe, 1 B 26" ESS
VCR4443/30 Shoe, 1 B 30" ESS
VCR4443/36 Shoe, 1 B 36" ESS
VCR4443/36V Shoe, 1 B 36" ESS (Optional)
V1Q4973 1Q4973 Shoe, 1 B 30" ESS w/ Trapezoidal Mud Hole
V1Q4607 1Q4607 Shoe, Master, 1 B 30" ESS w/ Trapezoidal Mud Hole
V1Q4728 1Q4728 Shoe, 1,B 36" ESS w/ Trapezoidal Mud Hole
Bottom Rollers
Page 124
V9W6649 Seal Group
VCR4517 Cap
V1D4610 Bolt 3/4 X 3.1/4
V5P8248 Flat Washer
V1D4608 1D4608 Mounting Bolt For 1205746X & 1205766X (3/4 X 2.75)
V5H1504 5H1504 Mounting Washer For 1205746X & 1205766X (20mm)
Carrier Rollers (On LGP Tractors only)
VCR4800 Carrier Roller Assembly (Qty 2)
V9W6647 Seal Group
Idlers
VCR4909 151-4587 Front Idler Group Complete D6H LGP Rear (Tread Diameter 545mm)
VCR4909V Front Idler Group Complete (Optional)
VCR4616 149-2493 Front Idler Group Com. D6H Front & Rear/D6H LGP Front (Tread Diameter 570mm)
VCR4616V Front Idler Group Com. (Optional)
VCR4617 Idler with Bushings D6H Front & Rear/D6H LGP Front
V9W6649 Seal Group
V9P2245 Bushing
V6T3220 149-2494 Idler Shaft
Sprockets
C 8 9
VCR4879 Seg e t Group
Segment G oup ( 5 Teeth
(25 eet - 5 pieces)
p eces)
V3T2481 3T2481 Strip, Guiding Guard (2)
V3T2849 3T2849 Strip, Guiding Guard (2)
V6H1717 6H1717 Bolt, Guiding Guard (16)
V5P8245 5P8245 Washer (16)
V6V8142 6V8142 Track Adjuster Seal, Upper Cup (1-Per Side)
V6K6307 Track Adjuster Seal (1-Per Side)
V2J6274 Track Adjuster Seal, O-Ring (1-Per Side)
Page 125
MODEL: Caterpillar D6H, D6HXL, D6HXR, D6HLGP, D6R
Specs: Pitch = 8.00", Link Ht.= 132mm, Bushing Diameter=

72.9mm Bolt Diameter = 3/4"
Serial Nos: D6H: (39LK) STD: 1FJ05546-UP, 2KD05500-UP, 3ED05500-UP, 3ZF05954-
UP, 4LG05596-UP, 4RC05653-UP
4YF05500-UP, 6CF05556-UP, 8-S/F Rollers, 4-D/F Rollers
D6H: (40LK)- XR: 1YL00324-UP, 2BL00376-UP, 2TL05500-UP, 5KK00340-
UP, 6CK00406-UP, 7ZK05500-UP, 8-S/F Rollers, 6-D/F Rollers
D6H: (41LK)- XL: 8KK00320-UP, 8SK05500-UP, 8ZJ00343-UP, 9KJ00621-

UP, 9LK00458-UP, 9RK05500-UP, 8-S/F Rollers, 6-D/F Rollers, 2-Carrier
Rollers
D6H: (45LK)- LGP 1KD05500-UP, 2TG04093-UP, 3YG04290-UP,
4GG05500-UP, 5HF04276-UP, 6FC04092-UP
8FC05675-UP, 8-S/F Rollers, 8-D/F Rollers, 2-Carrier Rollers
D6R: (39LK) STD: 2HM00001-UP, 2YN00001-UP, 3ZN00001-UP, 4FM00001-
UP, 5PR00001-UP, 6FR00001-UP 8-S/F Rollers, 4-D/F Rollers
D6R: (45LK)- LGP: 4HN00001-UP, 4TR00001-UP, 6GR00001-UP,

7AR00001-UP,8LN00001-UP, 8TM00001-UP, 9PN00001-UP 8-S/F Rollers,
8-D/F Rollers, 2-Carrier Rollers
D6R: (41LK)- XL: 4JR00001-UP, 4MN00001-UP, 4WR00001-UP, 5LN00001-
UP, 5RR00001-UP,6MR00001-UP, 7GR00001-UP
9BM00001-UP 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
D6R: (40LK)- XR: 6HR00001-UP, 6JN00001-UP, 7CR00001-UP,7DR00001-
UP, 7KN00001-UP, 8XN00001-UP, 9MN00001-UP 8-S/F Rollers, 6-D/F

V6I9668 6I9668 Chain, 39L, SALT, Heavy Duty w/ SML
V6I9668V 6I9668 Chain, 39L, SALT, Heavy Duty w/ SML (Optional)
V8E9037 8E9037 Chain, 45L, SALT, Heavy Duty w/ SML
V8E9037V 8E9037 Chain, 45L, SALT, Heavy Duty w/ SML (Optional)
V6I9641 Track Group, 39L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H)
V6I9641V Track Group, 39L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H) (Optional)
V6I9647 Track Group, 40L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H XR)
V6I9653 6I9653 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H XL)
V6I9653V 6I9653 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H XL) (Optional)
V6I9654 6I9654 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 24" Shoe
V6I9654V 6I9654 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 24" Shoe (Optional)
V1Q4736 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 30" Shoe
V8E9038 Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 30" Shoe (D6H LGP)
V8E9038V Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 30" Shoe (D6H LGP) (Optional)
VCR5551/39/20 6I9643 Track Group, 39L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 20" ESS Shoe
VCR5551/39/24 1Q4937 Track Group, 39L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 24" ESS Shoe
Page 126
VCR5551/40/20 Track Group, 40L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 20" ESS Shoe
VCR5551/4120V 6I9655 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 20" ESS Shoe (Optional)
VCR5551/4122V 6I9656 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" ESS Shoe (Optional)
VCR5551/41/24 1Q4743 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 24" ESS Shoe
VCR5551/4124V 1Q4743 Track Group, 41L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 24" ESS Shoe (Optional)
VCR5551/45/36 208-1508 Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 36" ESS Shoe
VCR5551/4536V 208-1508 Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 36" ESS Shoe (Optional)
V1Q4727 1Q4727 Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 36" ESS w/ Trapezoidal M/Hole
Your Track Groups
VCR5546/39 Pin and Bushing Group, 39L *** Not Interchangeable with OEM & V-Track Chains ***
VCR5544/39 Bushing & Seal Kit, 39L *** Not Interchangeable with OEM & V-Track Chains ***
VCR5547/39 Pin and Bushing Group, 39L *** For OEM Chains Only ***
VCR5545/39 Bushing Group, 39L *** For OEM Chains Only ***
VCR5534V Link Segment for V-Track Chain
VCR5608 Master Link Complete, R/H
VCR5609 Master Link Complete, L/H
V8E7407 Master Link Pin End R/H
V8E7408 Master Link Pin End L/H
VCR5536 Track Link,, L.H.
VCR5541 Salt Pin
V8E7222 Salt Bushing *** For OEM Chains Only ***
VCR4438 Thrust Ring
Track Hardware
Track Shoes
VCR4442/18 Shoe, 1 B 18"
VCR4442/20 6Y6285 Shoe, 1 B 20"
VCR4442/22 6Y6286 Shoe, 1 B 22"
VCR4442/24 6Y6287 Shoe, 1 B 24"
VCR4442/26 Shoe, 1 B 26"
VCR4442/28 Shoe, 1 B 28"
Page 127
VCR4442/30 6Y8973 Shoe, 1 B 30"
VCR4442/36 6Y6288 Shoe, 1 B 36"
VCR4443/18 Shoe, 1 B 18" ESS
VCR4443/20 6Y6391 Shoe, 1 B 20" ESS
VCR4443/22 6Y6389 Shoe, 1 B 22" ESS
VCR4443/24 1Q4930 Shoe, 1 B 24" ESS
VCR4443/24V 1Q4930 Shoe, 1 B 24" ESS (Optional)
VCR4443/26 Shoe, 1 B 26" ESS
VCR4443/30 Shoe, 1 B 30" ESS
VCR4443/36 Shoe, 1 B 36" ESS
VCR4443/36V Shoe,, 1 B 36" ESS (Optional)
( p )
Bottom Rollers
V9W6649 Seal Group for CR4297 & CR4298
VCR4517 Cap for CR4297 & CR4298
V1D4610 Mounting Bolt for CR4297 & CR4298
V5P8248 Mounting Flat Washer for CR4297 & CR4298
V1D4608 1D4608 Mounting Bolt For 1205746X & 1205766X (3/4 X 2.75) D6H Early
V5H1504 5H1504 Mounting Washer For 1205746X & 1205766X
V6V5845 6V5845 Mounting Bolt For 1205746X & 1205766X (20mm X 2.50 X 70mm) D6H Late D6R
V8T3282 8T3282 Mounting Washer For 1205746X & 1205766X (20mm)
Carrier Rollers (On LGP Tractors only)
Page 128
V9W6647 Seal Group
Idlers
VCR4909 Front Idler Group Complete (Tread Diameter 545mm)
D6H-XR & D6R XR: Front & Rear (4-Required)
D6H LGP & D6R LGP: Front & Rear for serial #'s 1KD1-401,1KD662-UP, 2TG544-Up,
3YG557-Up, 4GG466-Up, 4HN1-Up, 4TR1-Up, 5HF442-Up, 6FC718-Up, 6GR1-Up, 7AR1-
Up, 8FC1-460, 8FC965-Up, 8LN1-Up, 8TM1-Up, 8YC1-472, 8YC476, 8YC478, 8YC480-
481, 8YC483, 9PN1-Up
D6H LGP: Rear Idler For Serial #'s 1KD402-661, 2TG-543, 3YG1-556, 4GG1-465, 5HF1-
441, 6FC1-717, 8FC461-964, 8YC473-Up (2-Required)
VCR4909V Front Idler Group Complete (Optional)
V7T9840 Idler W/Bushings D6H-XR Front & Rear/D6R-XR Front & Rear/ D6H LGP, D6R LGP Front &
Rear for serial #
1KD1-401,1KD662-UP,2TG544-UP,3YG557-UP,4GG466-UP,4HN1-UP,4TR1-UP,5HF442-
UP,6FC718-UP,6GR1-UP
7AR1-UP,8FC1-460,8FC965-UP,8LN1-UP,8TM1-UP8YC1-472,8YC476,8YC478,8YC480-
481,8YC483,9PN1-UP
VCR4616 Front Idler Group Complete (Tread Diameter 570mm)
D6H STD & XL: Front & Rear (4-Required), D6R STD & XL: Front & Rear(4-Required)
D6H LGP: Front Idler For Serial #'s 1KD402-661, 2TG1-543, 3YG1-556, 4GG1-465, 5HF1-
441, 6FC1-717, 8FC461-964, 8YC473-Up (2-Required)
VCR4616V Front Idler Group Com (Optional)
VCR4617 Idler with Bushings D6H Front & Rear/D6H LGP Front, D6R STD, XL (Front & Rear)
V9W6649 Seal Group
V9P2245 Bushing
V6T3220 149-2494 Idler Shaft
V2024296 202-4296 Idler Group Less Brackets, New Cat Extended Tread Life Design (Can Use CR4909 &
CR4909V)
V2024304 202-4304 Idler Group Less Brackets, New Cat Extended Tread Life Design (Can Use CR4616 &
CR4616V)
Sprockets
VCR5515 173-0945 Segment Group (25 Teeth - 5 pieces)
VCR5515V 173-0945 Segment Group (25 Teeth - 5 pieces) (Optional)
Note: Refer to your parts manual for proper frame group before ordering guiding
guards. Guards listed below are for U.S. made machines only
V9U8456 9U8456 Strip, Guiding Guard (8)
V8T8919 8T8919 Mounting Bolt For 9U8456 Strip (32) (1/2" X 1.3/4")
V4T4223 4T4223 Mounting Washer For 9U8456 Strip (32) (1/2" X 1.3/4")
V5G9075 5G9075 Strip, Guiding Guard (2)
V5G9076 5G9076 Strip, Guiding Guard (2)
V5C6565 5C6565 Bolt, Guiding Guard For 5G9075/5G9076 Strips (16) 1/2-13X1.1/4
V5P8245 8T4223 Washer, Guiding Guard For 5G9075/5G9076 Strips (16) 1/2-13X1.1/4
V3T2481 3T2481 Strip, Guiding Guard
V3T2849 3T2849 Strip, Guiding Guard
V6H1717 6H1717 Mounting Bolt For 3T2481/3T2489 Strips (1/2" X 1.1/8") (16)
V5P8245 5P8245 Mounting Washer For 3T2481/3T2489 (16)
V9X4582 Track Adjuster Seal Assembly
V3T2077 Bearing
V3W1852 Retaining Ring
Track Frame Components "Metric Mounting Hardware"
V1604103 160-4103 Strip For Guiding Guard (Note: D6R Std, D6R-XR, D6R-LGP Front Guard Assemblies) (4-
Required)
V1893032 189-3032 Strip For Guiding Guard (Note: D6R Std, D6R-XR, D6R-LGP Rear Guard Assemblies) (4-
Required)
V8T4139 8T4139 Guiding Guard Mounting Bolt 12mm X 30mm (16)
Page 129
V5P8245 8T4223 Washer For Guiding Guard (16)
Page 130
MODEL: Caterpillar D6M, D6N-XL, D6N-LGP
Specs: Pitch =7.50", Bolt Diameter= 3/4" Link
Ht.=4.69"(119MM), Bushing O.D.= 2.56"(65MM)
Serial Nos: D6M XL: 2SY1-UP, 3WN1-UP, 4HS1-UP, 5WR1-UP, 6LR1-UP, 9ZM1-UP
(40LK), 8-S/F Rollers, 6-D/F Rollers, 2 Carrier Rollers
D6M LGP: 1DD5879-UP, 2REN1-UP, 2SD5552-UP, 4GS1-UP, 4JN1-UP,
4KD5588-UP, 5NR1-UP, 9HC5520-UP (46LK) 8-S/F Rollers, 8-D/F Rollers, 2-
Carrier Rollers
D6N-XL: AKM1-Up, CBL1-Up, CCK1-Up, ALH1-Up, CBF1-Up, CBJ1-Up
(40Lk) 8-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
D6N-LGP: ALR1-Up, CCG1-Up, ALY1-Up, CCS1-Up (46Lk) 8-S/F Rollers, 8-
D6M Fine Grader: (47Lk)
D6N Fine Grader: (47Lk)

V1102976 110-2976 Chain, 40L, SALT, w/ SML, Heavy Duty
V1102976V Chain, 40L, SALT, w/ SML, Heavy Duty (Optional)
VCR5469/40/20 126-2843 Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 20" Shoe (D6M-XL)
VCR5469/40/22 110-2977 Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 22" Shoe (D6M-XL)
VCR5469/4022V 110-2977 Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 22" Shoe (D6M-XL) (Optional)
VCR5469/40/24 110-2978
110 2978 Track Group
Group, 40L
40L, SALT
SALT, w/ SML,
SML Heavy Duty
Duty, w/ 1 B 24"
24 Shoe (D6M
(D6M-XL)
XL)
VCR5469/4024V 110-2978 Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 24" Shoe (D6M-XL) (Optional)
VCR5469/46/24 Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 24" Shoe (D6M-LGP)
VCR5469/4624V Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 24" Shoe (D6M-LGP) (Optional)
VCR5469/46/28 106-1645 Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 28" Shoe (D6M-LGP)
VCR5469/4628V 106-1645 Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 28" Shoe (D6M-LGP) (Optional)
VCR5469/46/34 106-1646 Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 34" Shoe (D6M-LGP)
VCR5469/4634V 106-1646 Track Group, 46L, SALT, w/ SML, Heavy Duty, w/ 1 B 34" Shoe (D6M-LGP) (Optional)
Your Track Groups
VCR5458 Track Link R.H.
VCR5459 Track Link L.H.
VCR5442 106-1620 Track Pin 1.5" O.D. (38MM)
VCR5510 1061618 Track Bushing (OEM Only)
VCR5447 8E9642 Seal Assembly
VCR5446 106-1621 Thrust Ring
Track Shoes (Bolt Hole = 3/4")
VCR5450/20 106-1604 Shoe, 1 B 20"
VCR5451/20 106-1612 Shoe, 1 B Master 20"
VCR5451/20V 106-1612 Shoe, 1 B Master 20" (Optional)
VCR5450/22 106-1607 Shoe, 1 B 22"
VCR5451/22 106-1613 Shoe, 1 B Master 22"
VCR5450/24 117-0615 Shoe, 1 B 24"
Page 131
VCR5451/24 117-0616 Shoe, 1 B Master 24"
VCR5450/28 Shoe, 1 B 28"
VCR5451/28 Shoe, 1 B Master 28"
VCR5451/28V Shoe, 1 B Master 28" (Optional)
VCR5450/34 106-1605 Shoe, 1 B 34"
VCR5451/34 106-1616 Shoe, 1 B Master 34"
Track Hardware
V6V1792 Track Bolt 3/4X2.1/2
V1S1860 Track Nut 3/4
V1061642 106-1642 Master Link Bolt - Short (2 needed)
V1070719 107-0719 Master Link Bolt - Long (2 needed)
Bottom Rollers
VCR6152 121-0824 Roller Group S/F
VCR6152V Roller Group S/F Series III (Optional)
VCR6153 121-0827 Roller Group D/F
VCR6153V Roller Group D/F Series III (Optional)
V6V3303 6V3303 Roller Mounting Bolt (16mm X 2.00 X 60mm)
Carrier Rollers
VCR4799 Carrier Roller Assembly (QTY 2)
VCR4799V Carrier Roller Assembly (QTY 2) (Optional)
V9W6647 Seal Group
Idlers
VCR4589 Idler Group Less Brackets (All D6M Front & Rear) (4-Required)
VCR4589V Idler Group Less Brackets (Optional) (4-Required)
VCR4590 Idler Shell w/Bushings (All D6M Front & Rear)
V6T3285 Shaft
VCR4405 Bronze Bushing
V9W7232 Seal Group
V1901546 190-1546 Idler Group Less Brackets Increased Tread Life design (D6N Models) (Can use CR4589)
Sprockets
VCR5875 6I8078 Segment Group
VCR5875V 6I8078 Segment Group (Optional)
V6V0937 Segment Bolt (25-needed per side)
V7H3607 Segment Nut (25-needed per side)
V2S5658 Washer (25-needed per side)
V8G4945 Track Adjuster Seal Assembly
V1482766 148-2766 Strip Guiding Guard (4)
V1482767 148-2767 Strip Guiding Guard (4)
V8T4192 8T4192 Bolt (12mm X 1.75 X 25mm) (24)
V5P8245 5P8245 Washer (24)
Page 132
MODEL: Caterpillar D7, D7C, 977E, 977H, 977K, 977L
Specs: Pitch = 8", Link Ht = 117.5 mm, Bushing OD = 66.675
mm, Bolt Diameter= 3/4"
Serial Nos: D7: 7M1 -Up, 3T1 -Up, 4T1 -Up, 6T 1 -Up (37 or 41 Link) 6-S/F Rollers, 4-
D7C: 17A 1 -UP (37 Link) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
977E: 20A2509-4222 (40 Link) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers
977H: 53A1-8886 (40 Link) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
977K: 46H1 -Up, 76H 1 -Up, 48J-1280, 70J -2771, 11K 1-3918 (41 Link) 6-
S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
977L: 11K 3919-5958 (41 Link) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers

VCR1769/41 Chain, 41L, Sealed, w/ Master Pin 977K/977L
VCR2262/40/18 Track Group
Group, 40L
40L, Sealed
Pin, w/ 3 B 18"
18 Shoe
Your Track Groups
VCR265 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Track Shoes (Bolt Hole = 3/4")
VCR2086/18 Shoe, 1 B 18"
VCR2086/20 Shoe, 1 B 20"
VCR2086/22 6Y6402 Shoe, 1 B 22"
VCR2086/24 Shoe, 1 B 24"
VCR2086/34 Shoe, 1 B 34"
VCR4246/18 8E4424 Shoe, 2 B 18"
VCR4246/20 Shoe, 2 B 20"
VCR4246/24 Shoe, 2 B 24"
VCR4246/28 Shoe, 2 B 28"
Page 133
Track Hardware
Bottom Rollers
VCR1652A1 Roller Assembly, S/F 3/4" Bolt Hole (Qty 8) #1,3,5,6 -(LGP) 8
VCR1652A1V Roller Assembly, S/F 3/4" Bolt Hole (Qty 8) #1,3,5,6 -(LGP) 8 (Optional)
VCR1652A2 Roller Assembly, D/F 3/4" Bolt Hole (Qty 4) #2,4 - (LGP) 8
VCR1652A2V Roller Assembly, D/F 3/4" Bolt Hole (Qty 4) #2,4 - (LGP) 8 (Optional)
V9W6647 Seal Group
V8S2539 Bushing
VCR2612 Key
VCR1654 Collar, Inner
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V8F6711 Gasket
V3B4512 Lock Washer
V2S0115 Flat Washer
Carrier Rollers
V9W6647 Seal Group
VCR2875 Shaft
Idlers
VCR1169 Idler Group Less Brackets For D7 Machine
V5M1731 Idler Shaft For CR1169
VCR1478 Idler Group Less Brackets For 977H Machine
V5M2466 Idler Shaft For CR1478
V7F2022 Idler Lock Pin
VCR4095 Idler Group For 977K S/N: 1-3167 When ordering Complete Idler Group, 977K S/N:
11K3168-3918, 977L S/N: 11K3919-Up. Contact VPI If Ordering Individual Components
VCR4095V Front Idler w/Bearing Blocks (Optional) (2-Required)
VCR1168 Idler Shell (977 Models only **do not use for D7***) S/N 46H, 76H, 48J464-up, 70J724-up,
11K3168-3918; 977L; 11K3919-up, 14X, 64X, 95X (2-Required)
VCR2695 9M9758 Idler Shaft
V4H9105 4H9105 Idler Bushing O-ring
V8F6711 8F6711 Idler Shaft O-ring
V8S2539 Bushing
V9W6647 Seal Group
V5M5000 5M5000 Idler Lock
V3S3878 3S3878 Idler Plate Assembly
V7G1899 7G1899 Shim, Side Plate (12)
V7G1900 7G1900 Shim, Top Plate (48)
V4B1398 4B1398 Plate (8)
V1A1460 1A1460 Bolt, Spring (8)
V3B4508 3B4508 Washer, Spring
Sprockets
VCR2212 Segment Group (977K only **do not use for D7***) S/N 46H, 76H, 48J-416,
Page 134
70J-703, 11K-2959 (27 Teeth) (9 pcs.)
VCR2215 Segment Group (D7; 3T, D7D: 17A, 977H; 53A, with Segment Type Conversion-use
with Adapter 4S9034)
VCR1456 Sprocket Rim (Use for 977K: S/N 48J417-1794, 70J704-3167, 11K2960-3918;
977L; S/N 11K3919-5958)
V3S0336 Sprocket Bolt (27 pieces per side)
V903400 Track Adjuster Kit
V3P6059 3P6059 Wear Strip, Idler Collar (4)
V3T4482 3T4482 Wear Strip Assembly (Includes 3P2178 Wear strip) (4)
V3P2178 3P2178 Idler Wear Strip (4)
V9S1045 9S1045 Strip Guiding Guard (3)
V0L1325 0L1325 Washer Guiding Guard (24)
Page 135
MODEL: Caterpillar D7E, D7F, D7G, 973, 977L
Specs Pitch = 8.5", Link Ht = 126 mm, Bolt Diameter = 3/4",
Bushing OD = 71.44mm
D7E: 47A 1-Up, 48A 1 -Up, 79A 1 -Up, 95A 1 -Up, 75E 1 -Up (38 LK) 6-S/F
D7F: 91E 1 -Up, 92E 1 -Up, 61G 1 -Up, 93N 1 -Up, 94N 1 -Up (38LK) 6-S/F
D7G: 12V, 64V, 65V, 89V, 91V, 92V, 7MB (38 LK) 6-S/F Rollers, 6-D/F
D7G LGP : 44W, 45W, 72W (41LK), 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
977L: 14X, 64X, 95X, 48J, 70J (39LK) 6-S/F Rollers, 8-D/F Rollers, 4-
Carrier Rollers
973: 66G 1-787, 90L, 91L, 32Z (40 LK) 6-S/F Rollers, 8-D/F Rollers, 4-
Carrier Rollers
973 LGP: 26Z, 86G-222 (40Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
571G: 16W (38 LK) - Pipe layers, 6-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
572G: 40U (38 LK) - Pipe layers, 6-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers

VCR2576/38 Chain, 38L, Sealed, w/ Master Pin (Bushing OD = 71.4mm)
VCR2576/38V Chain, 38L, Sealed, w/ Master Pin (Bushing OD = 71.4mm) (Optional)
VCR2576/39 Chain, 39L, Sealed, w/ Master Pin (Bushing OD = 71.4mm) JD855
VCR2605/38/22 Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 22" Shoe ESS
Your Track Groups
VLSD7EDRY Link Segment (For Old Style Standard Links)
VCR1538 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR3308/38 3P0955 Chain, 38L, Sealed, w/ SML (Bushing OD = 71.4mm)
VCR3308/38V 3P0955 Chain, 38L, Sealed, w/ SML (Bushing OD = 71.4mm) (Optional)
VCR3308/39 Chain, 39L, Sealed, w/ SML (Bushing OD = 71.4mm)
Page 136
VCR3308/41V Chain, 41L, Sealed, w/ SML (Bushing OD = 71.4mm) (Optional)
VCR3315/3828 Track Group, 38L, Sealed, w/ SML, w/ 1 B 28" Shoe
VCR3314/38/22 Track Group, 38L, Sealed, w/ SML, w/ 1 B 22" Shoe ESS
Your Track Groups
VD7ESMLPIN Joining Pin for Split Master Link (Extra)
VCR1538 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR3116/38 117-1024
117 1024 Chain, 38L, SALT
Chain 38L SALT, w/ SML (Bushing OD = 74.6mm) (D7E, D7F
74 6mm) (D7E D7F, D7G)
VCR3116/38V Chain, 38L, SALT, w/ SML (Bushing OD = 74.6mm) (D7E, D7F, D7G) (Optional)
VCR3116/39 Chain, 39L, SALT, w/ SML (Bushing OD = 74.6mm) (JD855)
VCR3116/39V Chain, 39L, SALT, w/ SML (Bushing OD = 74.6mm) (JD855) (Optional)
VCR3116/40 Chain, 40L, SALT, w/ SML (Bushing OD = 74.6mm) (973)
VCR3116/40V Chain, 40L, SALT, w/ SML (Bushing OD = 74.6mm) (973) (Optional)
VCR3116/41 117-1027 Chain, 41L, SALT, w/ SML (Bushing OD = 74.6mm)
VCR3116/41V Chain, 41L, SALT, w/ SML (Bushing OD = 74.6mm) (Optional)
VCR3145/3828 Track Group, 38L, SALT, w/ SML, w/ 1 B 28" Shoe
VCR3146/38/22 Track Group, 38L, SALT, w/ SML, w/ 1 B 22" Shoe ESS
VCR4004/40/20 Track Group, 40L, SALT, w/ SML, w/ 2 B 20" Shoe (973)
VCR4004/40/22 Track Group, 40L, SALT, w/ SML, w/ 2 B 22" Shoe (973)
Your Track Groups
VCR3114 Salt Pin
VCR3215 Ring
Page 137
VCR4268/38 Chain, 38L, SALT, Pro Link, w/ SML
VCR4451/38/20 Track Group, 38L, SALT, Pro Link, w/ SML, w/ 1 B 20" Shoe (D7F,G)
VCR4452/38/22 Track Group, 38L, SALT, Pro Link, w/ SML, w/ 1 B 22" Shoe ESS
Your Track Groups
VCR4312 Split Master Link Complete, R.H.
VCR4313 Split Master Link Complete, L.H.
VCR4255 7T4657 Link, R.H.
VCR4256 7T4658 Link, L.H.
VCR3114 Salt Pin
VCR3215 Ring
Track Hardware
V2P9670 Master
M t Link Bolt,
Li k B lt 3/4"
Track Shoes
VCR2086/18 Shoe, 1 B 18"
VCR2086/20 1P9807 Shoe, 1 B 20"
VCR2086/22 1P9808 Shoe, 1 B 22"
VCR2086/24 1P9809 Shoe, 1 B 24"
VCR2086/26 1P9810 Shoe, 1 B 26"
VCR2086/34 Shoe, 1 B 34"
VCR2604/20 Shoe, 1 B 20" ESS
VCR2604/22 5S6910 Shoe, 1 B 22" ESS
VCR3167/22 2P9669 Shoe, Master, 1 B 22" ESS
VCR2604/24 5S6911 Shoe, 1 B 24" ESS
VCR2604/24V 5S6911 Shoe, 1 B 24" ESS (Optional)
VCR2604/26 Shoe, 1 B 26" ESS
Page 138
VCR2604/28 Shoe, 1 B 28" ESS
VCR3291/16 Shoe, 2 B 16" (w/ Mud Hole) 973
VCR3303/16 Shoe, Master, 2 B 16" (w/ Mud Hole) 973
VCR3459/18 8E4434 Shoe, 2 B 18" w/o Mud Hole
VCR3748/18 8E4435 Shoe, Master, 2 B 18" w/o Mud Hole
VCR3748/18V 8E4435 Shoe, Master, 2 B 18" w/o Mud Hole (Optional)
VCR3459/20 Shoe, 2 B 20" w/o Mud Hole
VCR3748/20 Shoe, Master, 2 B 20" w/o Mud Hole
Bottom Rollers
VCR2617 Roller Assembly, S/F 7/8" Bolt Hole
VCR2617V Roller Assembly, S/F 7/8" Bolt Hole (Optional)
VCR2615 Roller Assembly, D/F 7/8" Bolt Hole
VCR2615V Roller Assembly, D/F 7/8" Bolt Hole (Optional)
V9W6647 Seal Group
VCR2609 9S0313 Shaft
V8S2539 Bushing
VCR2612 Key
VCR2610 End Collar (Inner)
VCR2611 End Collar (Outer)
V2H3928 Gasket
V9B2289 Pin
V2P0347 Plug
V8F6711 Seal (on shaft)
V1S8947 Plug
V1D4628 Roller Mounting Bolt (7/8" X 3.25")
V9H1031 Washer (Flat)
V8E2022TH 118-1636 Extended Wear Life Roller Assembly, S/F
V8E2023TH 118-1637 Extended Wear Life Roller Assembly, D/F
V1248250V Roller Assembly, S/F (Qty 6) Series III : Note these rollers have collars
V1248253V Roller Assembly, D/F (Qty 8) Series III : Note these rollers have collars
V1D4629 1D4629 Mounting Bolt 7/8" X 3.1/2" For 1248250X & 1248253X
V9H1031 Flat Washer
V1346636V 1346636 Roller Assembly, S/F (Qty 6) Series III : Note these rollers have collars. Use 24mm bolts
V1346637V 1346637 Roller Assembly, D/F (Qty 8) Series III : Note these rollers have collars. Use 24mm Bolts
V6V8133 6V8133 Mounting Bolt 24MM For 1346636 & 1346637
V6V8237 6V8237 Mounting Washer 24mm
Carrier Rollers
Page 139
V9W6647 Seal Group
VCR2875 Shaft
Idlers
VCR4095 Front Idler w/Bearing Blocks (2-Required)
D7G; 12V, 64V, 65V, 89V, 91V, 92V, D7GLGP; 44W, 45W, 72W, 977K; 48J464-up, 70J724-
up, 11K3168-3918, 977L; 11K3919-up, 14X,
64X, 95X
VCR4095V Front Idler w/Bearing Blocks (Optional) (2-Required)
VCR2698 Front Idler With Shaft (2-Required)
VCR1168 9H8489 Idler Shell (1S8186)
VCR2695 Idler Shaft
V9W6647 Seal Group
V8S2539 Bushing
V4H9105 4H9105 O-ring Bushing
V8F6711 8F6711 O-ring Shaft
V7G1899 7G1899 Shim, Side Plate (12)
V7G1900 7G1900 Shim, Top Plate (48)
V2M1163 2M1163 Plate Assy (4) D7E, F, G
V3S3878 3S3878 Plate Assy (4) 977L
V0S1622 0S1622 Bolt, Spring (8)
V3B4508 3B4508 Washer, Spring (8)
V5M5000 5M5000 Lock, Idler (4)
V3B4507 3B4507 Washer, Idler Lock (4)
V4F5192 4F5192 Bolt, Spring (4)
V3P6059 3P6059 Idler Collar Wear Strip (4)
VCR4032 Front Idler with Shaft- 973 Models All Serial Numbers (2-Required)
VCR1168 Idler Shell
V8S2539 Bushing
V0T0319 0T0319 Bolt, Idler Lock 7/16 X 2
V4K9943 4K9943 Washer, Idler Lock
V7P9261 7P9261 Idler Link, R.H. Outer, L.H. Inner
V7P9262 7P9262 Idler Link, R.H. Inner, L.H. Outer
V903400 Track Adjuster Seal Kit (2) (Check Serial Number for 973)
Sprockets
VCR1591 Sprocket Rim (S/N 47A1-3395, 48A1-6392, 64A1-750, 65A1-750)**Not for SALT Chain**
VCR3148 Segment Group (5 pieces 25 teeth) (D7F/G/973 & D7E s/n 47A3396-up, 48A6393-up)
VCR3148V Segment Group (5 pc 25 teeth) (D7F/G/973 & D7E s/n 47A3396-up, 48A6393-up (Optional)
VCR3113 8E4675 Individual Segment (Qty (5) VCR3113 = Qty (1) VCR3148)
V3T4482 3T4482 Guide Assembly (Includes 3P2178) (4)
V3P2178 3P2178 Guide Wear Strip (4)
V3B4510 3B3510 Washer Guiding Guard (24)
V1M9029 9M9029 Guard, Final Drive
Page 140
Page 141
MODEL: Caterpillar 973 - HighLink
Serial Nos: 973: 66G 788 up (40 LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
973 LGP: 86G233 up (40 LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
973C: 3RZ, BCP

VCR4268/38 Chain, 38L, SALT, w/ SML (Bolt Diameter 3/4")
VCR4268/40 7T4663 Chain, 40L, SALT, w/ SML (Bolt Diameter 3/4")
VCR4454/40/20 7T4664 Track Group, 40L, SALT, w/ SML w/ 2 B 20" Shoe
VCR4454/40/27 Track Group, 40L, SALT, w/ SML w/ 2 B 27" Shoe
VCR4698/40/20 Track Group, 40L, SALT, w/ SML w/ 3 B 20" Shoe
Your Track Groups
VCR4312 Split Master Link Complete, R.H. (2 Piece - 3/4")
VCR4313 Split Master Link Complete, L.H. (2 Piece - 3/4")
VCR4255 7T4657 Link, R.H. (3/4")
VCR4256 7T4658 Link, L.H. (3/4")
(3/4 )
VCR3114 Salt Pin
VCR3215 Ring
Lubricated Chains and Track Groups 7/8" Bolt Hole
VCR4700/40 6Y2592 Chain, 40L, SALT, w/ SML (Bolt Diameter 7/8")
Your Track Groups
VCR3650/38 Bushing Group, 38L
VCR4781 Master Link Complete, R.H. (2 Piece - 7/8")
VCR4782 Master Link Complete, L.H. (2 Piece - 7/8")
VCR4787 Track Link, R.H. (7/8")
VCR4788 Track Link, L.H. (7/8")
VCR3114 Salt Pin
VCR3215 Ring
Page 142
V2P9670 Master Link Bolt, 3/4"
V7T9825 Track Shoe Nut 7/8"
V9W9058 Master Link Bolt, 7/8"
Track Shoes (All 3/4" Bolt Holes)
VCR3291/18 Shoe, 2 B 18" w/ Mud Hole
VCR3303/18 Shoe, Master, 2 B 18" w/ Mud Hole
VCR4839/18 Shoe, 3 B 18"
VCR4839/20 Shoe, 3 B 20"
Track Shoes (All 7/8" Bolt Holes)
VCR4701/20 8E4416 Shoe, 2 B 20"
VCR4701/24 8E4427 Shoe, 2 B 24"
VCR4735/24 1Q4669 Shoe, Master, 2 B 24"
VCR4735/24V 1Q4669 Shoe, Master, 2 B 24" (Optional)
VCR4701/27 8E4418 Shoe, 2 B 27"
Bottom Rollers
VCR4293 Roller Assembly, S/F With Bolt On Retainer (Qty 6) #1, 4, 7
VCR4294 Roller Assembly, D/F With Bolt On Retainer (Qty 8) #2, 3, 5, 6
VCR4295 9W5582 Roller Shell, S/F w/ bushings
VCR4296 9W5581 Roller Shell, D/F w/ bushings
VCR4514 6T5114 Roller Cap 7/8" B/H
V9W6649 Seal Group
V2H3856 Mounting Bolt 7/8" X 3.3/4" For CR4293 & CR4294
V9H1031 Flat Washer
V1248250V Roller Assembly, S/F (Qty 6) Series III : Note these rollers have collars
V1248253V Roller Assembly, D/F (Qty 8) Series III : Note these rollers have collars
V1D4629 1D4629 Mounting Bolt 7/8" X 3.1/2" For 1248250X & 1248253X
V9H1031 Flat Washer
V1346636V 1346636 Roller Assembly, S/F Series III : Note these rollers have collars. Use 24mm bolts (For S/N:
86G1087- Up, 3RZ, BCP)
V1346637V 1346637 Roller Assembly, D/F Series III : Note these rollers have collars. Use 24mm Bolts (For S/N:
86G1087- Up, 3RZ, BCP)
124-8251 Roller Shell, S/F w/ bushings
124-8255 Roller Shell, D/F w/ bushings
V8S2539 8P6651 Roller Bushing
Carrier Rollers
V9W6647 Seal Group
Idlers
Page 143
VCR4032 Front Idler with Shaft-All Serial Numbers (2-Required)
VCR1168 Idler Shell
V8S2539 Bushing
V0T0319 0T0319 Bolt, Idler Lock 7/16 X 2
V4K9943 4K9943 Washer, Idler Lock
V7P9261 7P9261 Idler Link, R.H. Outer, L.H. Inner
V7P9262 7P9262 Idler Link, R.H. Inner, L.H. Outer
Sprockets
VCR3148 Segment Group (5 pieces 25 teeth)-All Serial Numbers
VCR3148V Segment Group (5 pieces 25 teeth)-All Serial Numbers (Optional)
V8G8031 8G8031 Sprocket Guiding Guard (4)
V1A0458 1A0458 Bolt, Sprocket guiding guard (20) 3/4" X 1.3/4"
V5P8248 5P8248 Washer (20)
V8G3351 8G3351 Idler Guiding Guard (4)
V2H3757 2H3757 Bolt, Idler guiding guard (12) 7/8" X 1.3/4"
V5P8249 5P8249 Washer (12)
Page 144
Specs: Pitch = 8.5", Link Ht= 131.5 mm, Bushing Diameter =
79.3 mm [stepped], Bolt = 3/4"
Serial Nos: D7H: 5BF1 -5954; 77Z1-Up; 79Z 1 -Up, 2RG1 -Up, 2SB 1 -Up, 4AB 1 -Up,
3XG, 4LG, 3ZF (40 LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
D7H LGP: 4FG 1 up; 80Z 1 up; 82Z 1 -Up, 5WB (43 LK) 8-S/F Rollers, 6-

VCR5071/40/20 9G2433 Track Group, 40L, SALT, w/ SML, w/ 1 B 20" Shoe ESS
VCR5071/40/22 6Y4103 Track Group, 40L, SALT, w/ SML, w/ 1 B 22" Shoe ESS
Your Track Groups
VCR5073/40 Bushing & Seal Group, 40 LK
VCR4126 Salt Pin
VCR4130 Ring
V6Y1063 Seal Assembly (Chicago Rawhide)
Track Hardware
V6V1792 Track Shoe Bolt, 3/4"
V6V1793 Master Link Bolt, Short (2 needed)
Track Shoes
VCR4469/20 Shoe, 1 B 20"
VCR4469/22 9G2434 Shoe, 1 B 22"
VCR4469/24 9G2438 Shoe, 1 B 24"
VCR4469/26 9G2424 Shoe, 1 B 26"
VCR4469/34 Shoe, 1 B 34"
Page 145
VCR4469/36 3T6210 Shoe, 1 B 36"
VCR4470/20 9G2432 Shoe, 1 B 20" ESS
VCR4470/22 9G2436 Shoe, 1 B 22" ESS
VCR4470/24 9G2428 Shoe, 1 B 24" ESS
Note: No master shoes required on D7H track groups.
Bottom Rollers
VCR4293 Roller Group, S/F With Bolt On Retainer (Qty 8) #1, 3, 5, 7
VCR4294 Roller Group, D/F With Bolt On Retainer (Qty 6) #2, 4, 6
V9W6649 Seal Group
VCR4473 Bushing
V2H3856 Mounting Bolt For CR4293 & CR4294 Rollers 7/8 X 3.3/4
V5P8249 5P8249 Flat Washer
V1248250V Roller Group, S/F (Qty 8) Series III Note: These Rollers Have Collars
V1248253V Roller Group, D/F (Qty 6) Series III Note: These Rollers Have Collars
V1D4629 1D4629 Mounting Bolt For 1248250X & 1248253X 7/8 X 3./12
V9H1031 Flat Washer 7/8
V1346636V 1346636 Roller Assembly, S/F (Qty 6) Series III : Note these rollers have collars. Use 24mm bolts
V1346637V 1346637 Roller Assembly, D/F (Qty 8) Series III : Note these rollers have collars. Use 24mm Bolts
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR4593 Front Idler with Shaft (Large Diameter 628mm) ** Fabricated** (4-Required) 430 lbs
VCR4593V Front Idler with Shaft (Large Diameter 628mm) **CAST** (4-Required) 630lbs
Note: VPI's V-Track Idler Is A Cast Web Design That Provides Durability and Weight For
Machine Stability Similar To The Cat Design. Idler Weight = 630 pounds
VCR4938 9W7646 Idler Shell with bushings (New Style With 8-Bolt Hole Retainer)
V6Y1757 Bushing For CR4938 Shell
VCR4594 9W9606 Idler Shell with bushings (Old Style With 12-Bolt Hole Retainer)
VCR4473 9G9340 Bushing For CR4594 Shell
V6Y1756 Idler Shaft
V9W6649 Seal Group
VCR4911 135-9896 Idler Group (For Extended Frame Machines , D7H-XR & D7R-XR)(Small Diameter 585mm)
** Fabricated ** (4-Required)
V1592086 159-2086 Idler Group CAST (Large Diameter 628mm) ** Not Available from Sorefa **
Sprockets
VCR5050 Segment Group (5 pieces ) Can use either segment this is the lighter one
VCR4532 173-0947 Segment Group (5 pieces )-All Serial Numbers
VCR4532V 173-0947 Segment Group (5 pieces )-All Serial Numbers (Optional)
VCR4539 Segment (Qty (1) VCR4532 = Qty (5) VCR4539)
V5P7665 Sprocket Bolt (25 pieces per side)
V8M3832 Segment Washer (25 needed)
V3T7711 3T7711 Wear Strip, Guiding Guard (4)
V3T7710 3T7710 Wear Strip, Guiding Guard (4)
V7V0343 7X0343 Bolt 5/8" X 1.1/4" For wear strip
V8T4122 8T4122 Washer for wear strip
V6V4649 6V4649 Seal -U- Cup
Page 146
V3T7390 3T7390 Wear Ring
Page 147
MODEL: Caterpillar D7H, D7R Heavy Duty Rails
Specs: Pitch=8.5", Bolt Hole= 7/8"
Serial Nos: D7H STD: 5BF5955-UP, 79Z5895-UP (40LK) 8-S/F Rollers, 6-D/F Rollers
D7H XR: 5BF5955-UP, 79Z5895-UP (41LK) 8-S/F Rollers, 8-D/F Rollers

D7H LGP: 80Z5524-UP (43LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier
Rollers
D7R STD: 2EN1-UP, 2HR1-UP (40LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier
Rollers
D7R XR: (41LK) 8-S/F Rollers, 8-D/F Rollers
D7R LGP: (43LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
Lubricated Heavy Duty Chains 7/8 Bolt Hole

VCR5574/40 115-6301 Chain, 40L, SALT, w/ SML, Heavy Duty
V1156307 115-6307 Track Group, 40L, SALT, w/ SML, Heavy Duty, w/ 1 B 22" Shoe ESS
Your Track Groups
VCR5587/40 Pin & Bushing Group 40L SALT ** For Sorefa & ITM Chain Only **
VCR5587/43 Pin & Bushing Group 43L SALT ** For Sorefa & ITM Chain Only **
VCR5585/40 Bushing Group 40L SALT ** For Sorefa & ITM Chain Only **
VCR5586/40 128-5604 Bushing Group 40LK ** For OEM chains only **
VCR5575 Link R.H.
VCR5576 Link L.H.
VCR5769 Split Master Link R.H.
VCR5770 Split Master Link L.H.
VCR5709 Pin
VCR5582 Bushing ** Note: ITM only **
VCR5583 Salt Bushing ** For OEM only **
V8E9648 Seal Assembly
VCR4130 Thrust Ring
VCR3191 Plug
Track Hardware
V7H3599 Bolt 7/8
V9W9058 Master Bolt 7/8X4.1/2" (4 Needed)
Track Shoes
VCR4526/22 Use the CR4054/22 Track Shoe
VCR4054/22 Shoe 1B 22" Extreme Service for the D7H
VCR4054/22V Shoe 1B 22" Extreme Service for the D7H (Optional)
V1Z9417 9Z9261 Shoe 1B 22" Extreme Service for the D7H/R With Trapezoidal Mud Hole
V1Z9422 9Z9265 Shoe 1B 24" Extreme Service for the D7H/R With Trapezoidal Mud Hole
Page 148
V1Z9960V 9Z9265 Shoe 1B 24" Extreme Service for the D7H/R With Trapezoidal Mud Hole (Optional)
V9W5541 1Q4946 Shoe 1B 26" Extreme Service for the D7H/R With Trapezoidal Mud Hole
V9W5541V 1Q4946 Shoe 1B 26" Extreme Service for the D7H/R With Trapezoidal Mud Hole (Optional)
V1270964 Shoe 1B 36" Extreme Service for the D7H/R With Trapezoidal Mud Hole
Bottom Rollers-Bolt Diameter = 1"
VCR4293 Roller Group, S/F With Bolt On Retainer (Qty 8) Note: Do Not Use For D7R Models
VCR4294 Roller Group, D/F With Bolt On Retainer (Qty 6) Note: Do Not Use For D7R Models
V9W6649 Seal Group
VCR4473 Bushing
V2H3856 Mounting Bolt For CR4293 & CR4294 Rollers 7/8 X 3.3/4
V5P8249 5P8249 Flat Washer 7/8
V1248250V 124-8250 Roller Group S/F Series III Note: These Rollers Have Collars
V1248253V 124-8253 Roller Group D/F Series III Note: These Rollers Have Collars
V1D4629 1D4629 Mounting Bolt For 1248250X & 1248253X 7/8X 3.1/2
V9H1031 Flat Washer 7/8
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR4593 Front Idler with Shaft (Large Diameter 628mm) ** Fabricated ** (4-Required) 430 lbs
VCR4593V Front Idler with Shaft (Large Diameter 628mm) **CAST** (4-Required) 630 lbs
ote VPI'ss V-Track
Note: ac Idler
d e Iss A Cast Web
eb Design
es g Thatat Provides
o des Durability
u ab ty and
a d Weight
e g t For
o
Machine Stability Similar To The Cat Design. Idler Weight = 630 pounds
VCR4938 9W7646 Idler Shell with bushings (New Style With 8-Bolt Hole Retainer)
V6Y1757 Bushing For CR4938 Shell
V6Y1756 Idler Shaft
V9W6649 Seal Group
VCR4911 135-9896 Idler Group (For Extended Frame Machines , D7H-XR & D7R-XR)(Small Diameter 585mm)
** Fabricated ** (4-Required)
V1592086 159-2086 Idler Group CAST (Large Diameter 628mm) ** Not Available from Sorefa **
Sprockets
VCR4532 Segment Group (5 pieces )-All Serial Numbers
VCR4532V Segment Group (5 pieces )-All Serial Numbers (Optional)
V5P7665 Sprocket Bolt (25 pieces per side)
V6V8142 6V8142 Seal -U- Cup, Track Adjuster
V1110450 111-0450 Wear Strip For Guiding Guard (8) (For S/N: 2EN1-888)
V1657211 165-7211 Wear Strip For Guiding Guard (8) (For S/N: 2EN889-Up)
V7X0343 7X0343 Bolt For Wear Strip (24) 58/" X 1.1/4"
V8T4122 8T4122 Washer For Wear Strip
Page 149
MODEL: Caterpillar D8
Specs Pitch = 8", Link Ht = 126.4 mm, Bushing OD = 69.9
mm, Bolt Diameter= 3/4"
Serial Nos: D8: 15A1-Up, 14A1-Up (42LK) 6-S/F Rollers, 6-D/F Rollers

Your Track Groups
VCR1977 1S8839 Track Link, R.H.
VCR1978 1S8840 Track Link, L.H.
VCR269 4B6620 Track Pin
Track Hardware
Carrier Rollers (s/n 77V9191-up, 58X)
V9W6647 Seal Group
Page 150
MODEL: Caterpillar D8H, D8K,983, 983B
Bolt Diameter= 7/8"
Serial Nos: D8H: 22A1 -Up, 35A1 -Up, 36A, 46A, 52A, 68A (39 LK or 41LK-Please
verify) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D8K: 66V1 -Up, 76V1 -Up, 77V1 -Up (41 LK) 6-S/F Rollers, 8-D/F Rollers,
4-Carrier Rollers
983: 38K (43Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
983B: 58X (43Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
Sealed MP Chains and Track Groups

VCR2877/41V Chain, 41L, Sealed, w/ Master Pin (Optional)
Your Track Groups
VCR2878/41 Pin and Bushing Group, 41LK-Master Pin Type-Old Style
VCR1560 Bushing
VCR2725 Sealed Pin
VCR1559 Seal Washer
VCR1178A Master Bushing
VCR1557 Master Pin
C 558
VCR1558 Space
Spacer
VCR2701/39 8S0398 Chain, 39LK, Sealed, w/ SML
VCR2701/41 8S0396 Chain, 41LK, Sealed, w/ SML
VCR2701/41V Chain, 41LK, Sealed, w/ SML (Optional)
VCR2701/43 Chain, 43LK, Sealed, w/ SML
VCR2702/39/22 8S0402 Track Group, 39L, Sealed, w/ SML, w/ 1 B 22" Shoe
VCR2702/39/24 9H1996 Track Group, 39L, Sealed, w/ SML, w/ 1 B 24" Shoe
VCR2702/39/26 1M0438 Track Group, 39L, Sealed, w/ SML, w/ 1 B 26" Shoe
VCR2702/4122V 8S0404 Track Group, 41L, Sealed, w/ SML, w/ 1 B 22" Shoe (Optional)
VCR2702/41/24 8S0405 Track Group, 41L, Sealed, w/,SML, w/ 1 B 24" Shoe
VCR2702/4124V 8S0405 Track Group, 41L, Sealed, w/,SML, w/ 1 B 24" Shoe (Optional)
VCR2703/39/22 8S0415 Track Group, 39L, Sealed, w/ SML, w/ 1 B 22" Shoe ESS
Your Track Groups
VLSD8KDRY Link Segment
VCR2725 Sealed Pin
VCR1560 Bushing
VCR1559 Seal Washer
VCR3217 Master Link L.H.. (2 pieces)
VCR3218 Master Link R.H.. (2 pieces)
Page 151
VCR3151/4122V 6Y2330 Track Group, 41L, SALT, w/ SML, w/ 1 B 22" Shoe ESS (Optional)
VCR3151/4124V 6Y2329 Track Group, 41L, SALT, w/ SML, w/ 1 B 24" Shoe ESS (Optional)
VCR3151/4126V Track Group, 41L, SALT, w/ SML, w/ 1 B 26" Shoe ESS (Optional)
Your Track Groups
VD8KSMLPIN Joining Pin for Split Master Link (Extra)
VCR3852 Salt Pin
VCR3212 Ring
Track Hardware
V7H3599 Track Shoe Bolt, 7/8"-For fastening of Standard Track Shoes (67mm)
V2S2140 Track Shoe Nut 7/8"
V8S0395 Master Link Bolt, 7/8"(4-Required)
Track Shoes
VCR2089/22 2S6345 Shoe, 1 B 22"
VCR2706/22 8S0385 Shoe, Master, 1 B 22"
VCR2706/22V 8S0385 Shoe, Master, 1 B 22" (Optional)
VCR2089/24 2S6346 Shoe, 1 B 24"
VCR2089/26 2S6347 Shoe, 1 B 26"
VCR2089/28 2S6364 Shoe, 1 B 28"
VCR2248/22 7S9093 Shoe, 1 B 22" ESS
Page 152
VCR2707/22 8S0391 Shoe, Master, 1 B 22" ESS
VCR2707/22V 8S0391 Shoe, Master, 1 B 22" ESS (Optional)
VCR2248/24 7S9094 Shoe, 1 B 24" ESS
VCR2248/26 7S9099 Shoe, 1 B 26" ESS
VCR2248/28 7S9098 Shoe, 1 B 28" ESS
Bottom Rollers-Bolt Diameter = 1"
VCR2798 Roller Assembly, S/F ***for 7/8" Bolt Roller use Spacer***
VCR2798V Roller Assembly, S/F ***for 7/8" Bolt Roller use Spacer*** (Optional)
VCR2787 Roller Assembly, D/F ***for 7/8" Bolt Roller use Spacer***
VCR2787V Roller Assembly, D/F ***for 7/8" Bolt Roller use Spacer*** (Optional)
V9W7220 Seal Group
VCR2346 Collar (Inner & Outer)
VCR1201 Roller Shaft
V8S7415 Bushing
V1T0068 Pin
V5F3106 Bushing Gasket
VCR2691 2P0347 Plug
V1H7339 Shaft O'RING
V1S8947 Gasket-plug
V1D4640 Roller Mounting Bolt (1"X 4 1/4")
V4S8073 Snap Ring
V3K5234 Lock Washer
VCR2833 9G7045 Roller Assembly S/F (For 983 Models)
VCR2835 9P1451 Roller Assembly D/F (For 983 Models)
Carrier Rollers (s/n 77V9191-up, 58X)
V9W6647 Seal Group
Idlers
VCR4096 Front Idler with Bearing Block (2-Required) 36A5157-Up, 46A20428-Up, 68A3073-Up & D8K
Models
VCR2637 Front Idler with Shaft (2-Required) 36A5157-Up, 46A20428-Up, 68A3073-Up & D8K Models
VCR1226 Shaft-D8H Only For S/N 22A1-up, 35A-up, 36A-5156, 46A-20427, 52A-up, 68A-3072
VCR2636 9S4324 Shaft-D8H Models With S/N 36A5157-Up, 46A20428-Up, 68A3073-Up & D8K Models
VCR1227 Front Idler Shell (For newer and older models)
V9W7220 Seal Group
V2M7099 2M7099 Idler Bearing Block For S/N: 22A1-up, 35A-up, 36A-5156, 46A-20427, 52A-up, 68A-3072
V2M7100 2M7100 Idler Bearing Block For S/N: 22A1-up, 35A-up, 36A-5156, 46A-20427, 52A-up, 68A-3072
V7F2022 7F2022 Idler Lock, Tapered (4)
V8H5724 8H5724 Nut, Idler Lock
V5P8245 5P8245 Washer, Idler Lock
V9S4325 9S4325 Idler Bearing Block R.H. For S/N: S/N 36A5157-Up, 46A20428-Up, 68A3073-Up & D8K
Models
V9S4326 9S4326 Idler Bearing Block L.H. For S/N: S/N 36A5157-Up, 46A20428-Up, 68A3073-Up & D8K
Models
V1S3513 1S3513 Idler Lock
V1A1460 1A1460 Bolt, Idler Lock
V5P8245 5P8245 Washer, Idler Lock
Page 153
V1M1440 1M1440 Plate Assembly (4)
V8H6507 8H6507 Idler Spring Rubber Coated For Early D8H Models (8)
V4F5003 4F5003 Idler Spring Rubber Coated For Current D8H & D8K Models (8)
V4B1398 4B1398 Plate (8)
V1P8363 1P8363 Shim, Top Plate (48) For Early D8H Models
V1P7660 1P7660 Shim, Top Plate (48) For Current Models
V2M3518 2M3518 Shim, Side Plate (56- Required For Early D8H Models, 24- Required For Current Models)
Sprockets
VCR3144 Segment Group (36A4649-up, 46A12885-up, 66V-2656, 76V-544, 77V-7007, 38K, 58X)
VCR3144V Segment Group (Optional)
V9S2727 Sprocket Bolt (27-Required per side)
V7H3609 Sprocket Nut (27-Required per side)
V9W6690 Seal Group
VCR3712 6P3596 Sprocket Hub (For D8H Serial # 77V3958-Up)
VCR3219 6P9107 Sprocket Hub (For D8H Serial # 77V1-3957, 35A, 36A, 46A)
V2P5896 2P5896 Idler Wear Strip (4)
V901401 Track Adjuster Seal Kit For S/N: 22A, 35A, 36A1-5327, 46A1-19391, 46A19392-24486 With
6-Roller Arr., 52A, 68A1-3904
V901402 Track Adjuster Seal Kit For S/N: 36A5328-Up, 46A19392-24486 With 7-Roller Arr.,
46A24487-Up, 68A3905-Up, D8K Models
V2P5897 2P5897 Idler Guiding Guard Wear Strip (4)
V5S0160 5S0160 Wear Strip Guiding Guard (3)
V5S0161 5S0161 Wear Strip Guiding Guard (3)
V0S1973 0S1973 Bolt For Guiding Guard (24)
V3B4514 3B4514 Washer For Guiding Guard (24)
Page 154
MODEL: Caterpillar D8L-(D8N type undercarriage)
Specs 8.5" pitch, link height = 150mm, Bushing OD = 81.6
mm, & 7/8 Track Shoe Bolt Diameter
Serial Nos: D8L: 7YB1-Up, 53Y1-Up, 7JC1-Up (45Lk) 8-S/F Rollers, 8-D/F Rollers
D8LSA: 4FB1-Up (45Lk) 8-S/F Rollers, 8-D/F Rollers
*See Undercarriage Hotline* To convert D8N to D8L you must replace bottom rollers with D8N
**Need To Verify Track Link Numbers When Replacing Track Components

To Determine If Old Style Or New Style Chains
Old Style Link Number = 108K1 And 108K2
New Style Link Number = 108R1 And 108R2

VCR4525/45 6I8665 Chain, 45L, SALT, w/ SML
VCR4525/45V 6I8665 Chain, 45L, SALT, w/ SML (Optional)
VCR4134/45/22 7T2755 Use VCR4639/45/22
VCR4134/45/24 7T2758 Use VCR4639/45/24
VCR4134/45/26 7T2762 Use VCR4639/45/26
VCR4134/45/26 Use VCR4639/45/28
VCR4229/45/22 7T2757 Use VCR4640/45/22
VCR4229/45/24 7T2763 Use VCR4640/45/24
VCR4229/45/26 Use VCR4640/45/26
Your Track Groups
Components For Old Style D8N/R Track Chains
See D8R Section for New Style Chain Components
VCR4632 Track Link, L.H..
VCR4633 Track Link, R.H..
VCR4126 Salt Pin
VCR4129 Salt Bushing (3.218" O.D. - 81.6mm)
VCR4127 Master Pin
VCR4130 Thrust Ring
VCR4128 Retainer Ring
VCR4756 Master Link R.H. (2 pieces)
VCR4757 Master Link L.H. (2 pieces)
Track Hardware
V6V1723 Track Bolt (7/8" x 3 3/8")
V7G6442 Track Nut
V6V1725 Master Link Bolt, Long (7/8" x 5 1/16") (ITM Chain Only use qty 4 of V6V1725)
V6V1724 Master Link Bolt, Short (7/8" x 3 11/16")
Track Shoes
VCR4054/22 7G6448 Shoe, 1 B 22"
VCR4054/24 9P2661 Shoe, 1 B 24"
VCR4054/26 9P2665 Shoe, 1 B 26"
Page 155
VCR4054/28 7G6454 Shoe, 1 B 28"
VCR4227/22 7T2390 Shoe, 1 B 22" ESS
VCR4227/24 7T2392 Shoe, 1 B 24" ESS
VCR4227/26 7T2394 Shoe, 1 B 26" ESS
VCR4227/28 Shoe, 1 B 28" ESS
VCR4227/30 Shoe, 1 B 30" ESS
VCR4227/36 Shoe, 1 B 36" ESS
V1Z9417 1Z9417 Shoe, 1 B 22" With Trapezoidal Mud Hole
V1Z9422 1Z9422 Shoe, 1 B 24" With Trapezoidal Mud Hole
V1Z9960V 1Z9422 Shoe, 1 B 24" With Trapezoidal Mud Hole (Optional)
V9W5541 9W5541 Shoe, 1 B 26" With Trapezoidal Mud Hole
V9W5541V 9W5541 Shoe, 1 B 26" With Trapezoidal Mud Hole (Optional)
Bottom Rollers **(ARE NOT INTERCHANGEABLE WITH
OEM)**
VCR4504 Old Style S/F Roller (Larger Shell Diameter) (D8L Type)
VCR4504V Old Style S/F Roller (Larger Shell Diameter) (Optional) (D8L Type)
VCR4056 Old Style D/F Roller (Larger Shell Diameter) (D8L Type)
VCR4056V Old Style D/F Roller (Larger Shell Diameter) (Optional) (D8L Type)
VCR4738 Roller Shell S/F For Old Style Roller
VCR4739 Roller Shell D/F For Old Style Roller
VCR4528 132-7928 Roller Assembly, SF (D8N/R Type)
VCR4528V 132-7928 Roller Assembly, SF (Optional) (D8N/R Type)
VCR4529 132-7929 Roller Assembly, DF (D8N/R Type)
VCR4529V 132-7929 Roller Assembly, DF (Optional) (D8N/R Type)
VCR4642 Roller Shell w/Bushings, SF**(See Note)**
VCR4643 Roller Shell w/Bushing, DF **(See Note)**
V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 6T1140 Bolt
B lt
Idlers
VCR4530 111-1730 Front Idler with Shaft (Large-Front & Rear, 4- Required)
VCR4530V Front Idler with Shaft (Large-Front & Rear) (Optional) (4-Required)
VCR4651 6Y0556 Front Idler Shell w/Bushings (Cast)
VCR4179 7T9511 Front Idler Shell w/Bushings (Fabricated)
VCR4215 138-9712 Idler Shaft
V9W9499 Bushing
V6T1139 6T1139 Idler Mounting Bolt Note: Used With 131-1650 End Cap
V9W4480 9W4480 Idler Mounting Bolt Note: Used With 131-1644 End Cap
V3S1349 3S1349 Washer 1.1/8" Flat Washer
V9W6651 Seal Group
Sprockets
VCR4059 Segment Group (3 pcs - 27 teeth)
V5P4130 Segment Bolt (27 needed)
V7H3608 Segment Nut (27 needed)
V340707 Washer (27 Needed)
V7T5853 7T5853 Track Guides (16)
V1A8063 1A8063 Bolt, For Track Guide 3/4" X 2.1/2" (32)
V5P8248 5P8248 Washer, For Track Guide (32)
V6V6900 6V6900 Seal-U-Cup
Page 156
MODEL: Caterpillar D8N
Serial Nos: D8N: 9TC1-Up, 5TJ, 7TK (44LK) 8-S/F Rollers, 8-D/F Rollers, 2-Carrier
Rollers
D8N: 1XJ1 -Up (44LK) 16-D/F Rollers, 2-Carrier Rollers
** Need to Verify Track Link Numbers When replacing track components to

determine if old style or new style chains**
Old Style Link Number = 108K1 and 108K2
New Style Link Number = 108R1 and 108R2

VCR4638/44/22 9W3318 Note: Use VCR4639/44/22
VCR4638/44/24 9W3320 Note: Use VCR4639/44/24
VCR4638/44/26 9W3322 Note: Use VCR4639/44/26
VCR4638/44/28 9W3323 Note: Use VCR4639/44/28
VCR4639/4424V 9W3321 Track Group, 44L, SALT, w/ SML, w/ 1 B 24" Shoe (Optional)
VCR4640/44/22 8E7700 Track Group, 44L, SALT, w/ SML, w/ 1 B 22" Shoe ESS
VCR4640/4422V 8E7700 Track Group, 44L, SALT, w/ SML, w/ 1 B 22" Shoe ESS (Optional)
Group, 44L
44L, SALT
SALT, w/ SML,
SML w/ 1 B 24
24" Shoe ESS
V1Q4685 Track Group, 44L, SALT, w/ SML, w/ 1 B 24" Shoe ESS, w/ Trapezoidal Mud Hole
Your Track Groups
Components For Old Style D8N/R Track Chains
See D8R Section for New Style Chain Components
VCR4053/45 Pin and Bushing Group, 45LK (For OLD STYLE D8N, D8R RAILS)
VCR4117/45 Bushing Group, 45LK (For OLD STYLE D8N, D8R RAILS)
VCR4632 9W3310 Track Link, L.H..
VCR4633 9W3309 Track Link, R.H..
VCR4126 Salt Pin
VCR4127 Master Pin
VCR4131 Seal Assembly (ITM Style)
Note: Can use either seal assembly in old style chains
VCR4130 Thrust Ring
Track Hardware
V6V1723 Track Bolt (7/8" x 3 3/8")
V7G6442 Track Nut
Page 157
Track Shoes
VCR4054/22 7G6448 Shoe, 1 B 22"
VCR4054/24 9P2661 Shoe, 1 B 24"
VCR4054/26 9P2665 Shoe, 1 B 26"
VCR4054/28 7G6454 Shoe, 1 B 28"
VCR4227/22 7T2390 Shoe, 1 B 22" ESS
VCR4227/24 7T2392 Shoe, 1 B 24" ESS
VCR4227/26 7T2394 Shoe, 1 B 26" ESS
VCR4227/28 Shoe, 1 B 28" ESS
VCR4227/30 Shoe, 1 B 30" ESS
VCR4227/36 Shoe, 1 B 36" ESS
V1Z9417 1Z9417 Shoe, 1 B 22" ESS With Trapezoidal Mud Hole
V1Z9960V 1Z9422 Shoe, 1 B 24" ESS With Trapezoidal Mud Hole (Optional)
V9W5541 9W5541 Shoe, 1 B 26" ESS With Trapezoidal Mud Hole
V9W5541V 9W5541 Shoe, 1 B 26" ESS With Trapezoidal Mud Hole (Optional)
Bottom Rollers
VCR4528 132-7928 Roller Assembly, SF
VLH1086V Roller Assembly, SF (Optional) (Sub for VCR4528V)
VCR4529 132-7929 Roller Assembly, DF
VCR4529V Roller Assembly, DF (Optional)
VCR4642 Roller Shell w/Bushings, SF
VCR4643 Roller Shell w/Bushings, DF
V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 6T1140 Bolt
Carrier Rollers
V9W7220 Seal Group
Idlers
VCR4530 111-1730 Front Idler with Shaft (Large-Front) (2-Required)
VCR4530V Front Idler with Shaft (Large-Front) (Optional) (2-Required)
VCR4179 7T9511 Front Idler Shell w/Bushings (Large-Front)
VCR4651 6Y0556 Front Idler Shell w/Bushings
VCR4531 111-1729 Front Idler with Shaft (Small-Rear) (2-Required)
VCR4531V Front Idler with Shaft (Small-Rear) (Optional) (2-Required)
VCR4652 6Y0553 Front Idler Shell w/Bushings (Small-Rear)
V9W9499 Bushing
V9W4480 9W4480 Idler Mounting Bolt 1.1/8" -7 X 5.1/2"
V3S1349 3S1349 Idler Mounting Washer
V9W6651 Seal Group
Sprockets
VCR4532V Segment Group (5 pcs - 25 teeth) (Optional)
V8C6857 8C6857 Bolt, For Track Guide 3/4" X 2.3/4" (32)
V2S0115 2S0115 Washer, For Track Guide (32)
V8T2185 Seal, Track Adjuster
Page 158
MODEL: Caterpillar D8R, D8T
mm,& 7/8 Track Shoe Bolt Diameter
Serial Nos: D8R: 7XM, 9EM, 6YZ, AKA (44LK) 8-S/F Rollers, 8-D/F Rollers, 2-Carrier
Rollers
D8T: (44LK)
Note: Please check Rollers before quoting, some special applications require
16-D/F Rollers instead of 8-D/F & 8-S/F Rollers

VCR4525/44 Chain, 44L, SALT, w/ SML (NEW STYLE D8N, D8R RAILS)
VCR4525/44V Chain, 44L, SALT, w/ SML (NEW STYLE D8N, D8R RAILS) (Optional)
VCR4639/4424V 9W3321 Track Group, 44L, SALT, w/ SML, w/ 1 B 24" Shoe (Optional)
Your Track Groups
VPBGD8RSALT Pin and Bushing Group, 44LK (FOR NEW STYLE D8R RAILS)
VG01084R0N45 Pin and Bushing Group, 45LK (FOR NEW STYLE D8R RAILS)
VBGD8RSALT Bushing Group, 45LK
V8E4506 Track Link, L.H..
V8E4505 Track Link, R.H..
VCR4126 Salt Pin
VCR4127 Master Pin
V8E9648 Seal Assembly
VCR4130 Thrust Ring
V8E4059 Master Link R.H. (2 pieces) (OEM Reference 8E4059+8E457)
V8E4060 Master Link L.H. (2 pieces) (OEM Reference 8E4060+8E4458)
Track Hardware
V6V1723 Track Bolt (7/8" x 3 1/2")
V7G6442 Track Nut
Track Shoes
VCR4054/22 7G6448 Shoe, 1 B 22"
VCR4054/24 9P2661 Shoe, 1 B 24"
VCR4054/26 9P2665 Shoe, 1 B 26"
VCR4054/28 7G6454 Shoe, 1 B 28"
VCR4227/22 7T2390 Shoe, 1 B 22" ESS
VCR4227/24 7T2392 Shoe, 1 B 24" ESS
VCR4227/26 7T2394 Shoe, 1 B 26" ESS
VCR4227/28 Shoe, 1 B 28" ESS
Page 159
VCR4227/30 Shoe, 1 B 30" ESS
VCR4227/36 Shoe, 1 B 36" ESS
V1Z9960V 1Z9422 Shoe, 1 B 24" ESS With Trapezoidal Mud Hole (Optional)
V9W5541 9W5541 Shoe, 1 B 26" ESS With Trapezoidal Mud Hole
V9W5541V 9W5541 Shoe, 1 B 26" ESS With Trapezoidal Mud Hole (Optional)
Bottom Rollers
VLH1086V Roller Assembly, SF (Optional) (Sub for VCR4528V)
VCR4642 Roller Shell w/Bushings, SF
V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 6T1140 Roller Mounting Bolt - 7/8 x 3 3/8" (86.5mm) - NOTE: Use with 6T1142 Cap Group
V9S1351 Roller Mounting Bolt - 7/8 x 5" - NOTE: Use with 1264233 Cap Group
Carrier Rollers
V9W7220 Seal Group
VCR4528 132-7928 Carrier Rollers Assembly (For S/N 9EM, 7XM, AKA) (Some 6YZ Models have this as a
carrier roller. Please confirm before ordering)
Idlers
VCR4530 111-1730 Front Idler with Shaft (Large-Front) (2-Required)
VCR4530V Front Idler with Shaft (Large-Front) (Optional) (2-Required)
VCR4179 7T9511 Front Idler Shell w/Bushings (Large-Front)
VCR4531 111-1729 Front Idler with Shaft (Small-Rear) (2-Required)
VCR4531V Front Idler with Shaft (Small-Rear) (Optional) (2-Required)
VCR4652 6Y0553 Front Idler Shell w/Bushings (Small-Rear)
V9W9499 Bushing
V9W4480 9W4480 Idler Mounting Bolt 1.1/8" -7 X 5.1/2"
V3S1349 3S1349 Idler Mounting Washer
V9W6651 Seal Group
Sprockets
V8C6857 8C6857 Bolt, For Track Guide 3/4" X 2.3/4" (32)
V2S0115 2S0115 Washer, For Track Guide (32)
V8T2185 Seal, Track Adjuster
Page 160
MODEL: Caterpillar D9G, H
Specs 10.25" pitch, Link Ht.= 156mm, Bushing OD =
89.0mm, Bolt Hole Dia.= 1"
Serial Nos: D9H: 66A12656- up (39LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
D9H: 90V-Up (39LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
DD9G: 90J86-UP, 91J86-UP (39LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers
Sealed With M/P Chains and Track Groups

VCR2514/39 Chain, 39L, Sealed, w/ Master Pin (Not Available Use CR2672/39 Chain)
Your Track Groups
VCR1822 Spacer
VCR2672/39 8S1731 Chain, 39L, Sealed, w/ SML (85mm Straight Bushing)
Your Track Groups
VCR2673/39 Pin & Bushing Group 39LK
VCR3940 Pin
VCR1820 Bushing
VCR1823 Seal Washer
V8S1723 Master Shoe Bolt
VCR3153/39 9W8320 Chain, 39LK, SALT, w/ SML (89mm Bushing O.D.)
VCR3153/39V 9W8320 Chain, 39LK, SALT, w/ SML (89mm Bushing O.D.) (Optional)
VCR3154/39/24 2P9443 Track Group, 39L, SALT, w/ SML, w/ 1 B 24" Shoe ESS
VCR3154/3924V 2P9443 Track Group, 39L, SALT, w/ SML, w/ 1 B 24" Shoe ESS (Optional)
VCR3154/3927V 2P9445 Track Group, 39L, SALT, w/ SML, w/ 1 B 27" Shoe ESS (Optional)
Your Track Groups
VCR3652/39 Bushing Group Salt, 39LK
VCR2866/39 Pin & Bushing Group, 39LK
VCR2857 Salt Pin
VCR2856 Salt Bushing (3.5" O.D. - 89mm)
VCR2858 Thrust Ring
Track Shoes
VCR2258/24 3T8559 Shoe, 1 B 24" ESS
VCR2671/24 3T8558 Shoe, Master, 1 B 24" ESS
Page 161
VCR2258/27 3T8561 Shoe, 1 B 27" ESS
VCR2258/30 3T8563 Shoe, 1 B 30" ESS
Track Hardware
V9M7445 Track Shoe Bolt (3" Long)
V1S6421 Track Shoe Nut
V8S1723 Master Link Bolt
Bottom Rollers
VCR4291 8P5605 Roller Assembly, SF
VCR4291V 8P5605 Roller Assembly, SF (Optional)
VCR4292 8P5604 Roller Assembly, DF
VCR4292V 8P5604 Roller Assembly, DF (Optional)
VCR4289 8P5486 Roller Shell, SF
VCR4290 8P5485 Roller Shell, DF
VCR1754 4M0578 Shaft
V1D4640 1D4640 Roller Mounting Bolt 1" X 1.1/4"
V3K5234 3K5234 Roller Mounting Washer
Carrier Rollers
VCR3518 Carrier Roller Group
Idlers
VCR4098 Front Idler less Guides (2-Required)
VCR4098V Front Idler less Guides (2-Required) (Optional)
VCR2700 Front Idler with Shaft (2-Required)
C 699
VCR2699 d e Shaft
Idler S at
V9W7225 Seal Group
V8P5430 8P5430 Bushing, Bronze
V2H3931 2H3931 O-ring, Shaft
V1S3513 1S3513 Idler Lock
V1B2886 1B2866 Bolt For Idler Lock 1/2" X 3.3/4"
V3B4508 3B4508 Washer For Idler Lock
V1S3511 Bracket (L.H.. Outer-R.H.. Inner)
V1S3512 Bracket (L.H. Inner. -R.H.. Outer)
V2M3509 2M3509 Shim Top Plate (28)
V9S1612 9S1612 Shim, Side Plate (90)
V9H2036 9H2036 Plate Assembly (4)
V4F5003 4F5003 Spring Rubber Coated (12)
V4B1398 4B1398 Plate (12)
V3B2968 3B2968 Bolt For Spring (12)
V3B4512 3B4512 Washer For Spring (12)
Sprockets
VCR3156 Segment Group (9 Segments)
VCR3156V Segment Group (9 Segments) (Optional)
V2M5656 Segment Nut (27 needed)
V3P2738 3P2738 Idler Collar Wear Strip (4)
V3T4481 3T4481 Idler Guiding Guard Wear Strip Assembly (4) (Includes 3P2739)
V3P2739 3P2739 Idler Guiding Guard Wear Strip (4)
V9M6743 9M6743 Guiding Guard Wear Strip (3)
V9M6744 9M6744 Guiding Guard Wear Strip (3)
V1D4626 1D4626 Bolt For Guiding Guard Wear Strip (24) 7/8" X 2.3/4"
Page 162
V900401 Track Adjuster Seal Kit For S/N: 90J1-92, 91J1-92 (2)
V900402 Track Adjuster Seal Kit For S/N: 66A9253-Up, 90J93-Up, 91J93-Up (2)
Page 163
MODEL: Caterpillar D9L
Specs 9.00" pitch, 1" Track Shoe Bolt Diameter, Bushing
O.D. = 85mm
Serial Nos: D9L: 14Y1-UP (47L) 8-S/F Rollers, 8-D/F Rollers

VCR4171/47/24 7T7666 Track Group, 47L, SALT, w/ SML, w/ 1 B 24" Shoe ESS
Your Track Groups
VCR4316 Salt Pin
VCR3856 Thrust Ring
V6V1727 Master Link Bolt (110mm)
V6V1728 Master Link Bolt (148mm)
Track Shoes
VCR4035/24 3T2758 Track
T k Shoe,
Sh 1 B 24" M
Moderate
d t S Service
i
VCR4169/24 3T8493 Track Shoe, 1 B 24" ESS
VCR4169/30 Track Shoe, 1 B 30" ESS
Track Hardware
V6V1726 Track Shoe Bolt
V7G0343 Track Shoe Nut
Bottom Rollers
VCR4234 Roller Assembly, SF
VCR4234V Roller Assembly, SF (Optional)
VCR3756 Roller Assembly, DF
VCR4921 Roller Shell, SF
VCR4922 Roller Shell, DF
V6T1139 6T1139 Roller Mounting Bolt
V3K5234 3K5234 Roller Mounting Washer
Sprockets
VCR3759 Segment Group, (Requires 3 9W4288 Segments)
VCR3759V Segment Group, (Requires 3 9W4288 Segments) (Optional)
V9W8328 Segment Bolt(27 per Segment)
V7H3609 Segment Nut(27 per segment)
V5P6604 Segment Washer(27 per segment)
V9W6630 Seal Group
Idlers
VCR4311 3T3621 Idler with shaft (4-Required)
VCR4311V 3T3621 Idler with shaft (4-Required) (Optional)
VCR4310 Idler Shell With Bushings
V9W4194 9W4194 Bushing
Page 164
V8P5374 8P5374 Track Guide For Bogie Suspensions (16)
V1D4629 1D4629 Bolt For Track Guide (32)
V5P8249 5P8249 Washer For Track Guide (32)
V8T1981 8T1981 Track Adjuster Seal (2)
Page 165
MODEL: Caterpillar D9N, D9R, D9T
Specs 9.45" pitch, Link Ht = 240mm, & 1" Bolt Diameter,
Bushing O.D. = 85mm
Serial Nos: D9N: 1DJ1 -Up, 6XJ (43Lk) 8-S/F Rollers, 8-D/F Rollers
D9R: 7TL, 8BL (43Lk) 8-S/F Rollers, 8-D/F Rollers
D9T: (43LK)

VCR4653/43 6Y1130 Chain, 43LK, SALT, w/ SML
VCR4653/43V 6Y1130 Chain, 43LK, SALT, w/ SML (Optional)
VCR4655/43/24 9W2751 Track Group, 43L, SALT, w/ SML, w/ 1 B 24" Shoe ESS
VCR4655/4324V 9W2751 Track Group, 43L, SALT, w/ SML, w/ 1 B 24" Shoe ESS (Optional)
VCR4655/43/27 9W2754 Track Group, 43L, SALT, w/ SML, w/ 1 B 27" Shoe ESS
VCR4655/4327V 9W2754 Track Group, 43L, SALT, w/ SML, w/ 1 B 27" Shoe ESS (Optional)
Your Track Groups
VCR4663 Salt Pin
VCR4664 Master Pin
V9W3589 Seal Assembly
VCR3856 Thrust Ring
VCR3191 g Assemblyy
Plug
V6V1728 Master Link Bolt (Long) (4-Required For ITM Chains) (2-Required Cat & Berco Chains)
V7T2283 Master Link Bolt (Short) (2-Required for Cat & Berco Chains)
Track Hardware
V6T2638 Track Bolt (1")
V7G0343 Track Nut (1" Square)
Track Shoes
VCR4671/24V 7T2294 Track Shoe, 1 B 24" ESS (Optional)
VCR4671/27 9W2738 Track Shoe, 1 B 27" ESS
VCR4671/27V 9W2738 Track Shoe, 1 B 27" ESS (Optional)
Bottom Rollers
VCR4672V 104-3495 Roller Assembly, SF (Optional)
VCR4673V 104-3496 Roller Assembly, DF (Optional)
VCR4674 104-8576 Roller Shell, SF
VCR4675 104-8577 Roller Shell, DF
V9W9844 Roller Bushing
V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 Roller Mounting Bolt
Idlers
VCR4681 125-4655 Front Idler with Shaft (Front & Rear) (4-Required)
VCR4681V 125-4655 Front Idler with Shaft (Front & Rear) (4-Required) (Optional)
V7T2778 7T2778 Idler Shaft
Page 166
V9W9499 9W9499 Idler Bushing
V9W4480 9W4480 Idler Mounting Bolt (Check End Cap Design For Quantities)
V3S1349 3S1349 Washer
Sprockets
V7T1248 Segment Bolt (30-needed)
V5P8249 Segment Washer (30- needed) (Reference CR3877)
V7H3609 Segment Nut (30- needed)
V7T5853 7T5853 Track Guiding Guard
V8C6857 8C6857 Bolt For Track Guide 3/4" X 2.3/4"
V2S0115 2S0115 Washer For Track Guide
V6V6900 6V6900 Track Adjuster Seal
Page 167
MODEL: Caterpillar D10N, D10R, D10T
Specs 10.25" pitch, & 1. 1/8" Track Shoe Bolt Diameter,
Bushing O.D. = 123.5mm
Serial Nos: D10N: 2YD1 -Up (44Lk) 8-S/F Rollers, 8-D/F Rollers
D10R: (44LK) 8-S/F Rollers, 8-D/F Rollers
D10T: (44LK) 8-S/F Rollers, 8-D/F Rollers
Lubricated Chains and Track Groups **Positive Pin

Retention**
VCR6075/44 8E7928 Chain, 44LK, SALT, w/ SML, PPR (SPECIAL ORDER FROM ITM)
VCR6075/44V 8E7928 Chain, 44LK, SALT, w/ SML, PPR (Optional)
VCR6076/44/24 7T0723 Track Group, 44L, SALT, w/ SML, w/ 1 B 24" Shoe, PPR
Replaced By Non-PPR Track Chains and Track Groups Shown Below

Your Track Groups
Pin and Bushing Group, 44LK ***For ITM PPR Chain Only
VCR5249 9W5266 Track Link, L.H. ***For Sorefa & ITM Chain Only
VCR5248 9W5265 Track Link, R.H. ***For Sorefa & ITM Chain Only
VCR5644 Track Link, L.H. ***For Berco and OEM Chain Only
VCR5643 Track Link, R.H. ***For Berco and OEM Chain Only
VCR6136 6Y1579 Salt Pin PPR
VCR5687 9U8537 Seal Assembly (Arctic) (Replaces 9W5186)
VCR5256 9W9300 Thrust Ring
VCR3191 Plug Assembly (Replaces 7G4332 & 6Y0473)
VCR6137 6Y0471 Retainer Ring PPR
VCR5641 Master Link R.H. (2 pieces) (OEM Reference 7T0717+7T0719)
OEM and Berco only
VCR5642 Master Link L.H. (2 pieces) (OEM Reference 7T0718+7T0720)
OEM and Berco Only
VCR5246 Master Link R.H. (2 pieces) (OEM Reference 7T0719+9W5721)
Sorefa and ITM Only
VCR5247 Master Link L.H. (2 pieces) (OEM Reference 7T0720+9W5722)
Sorefa and ITM Only
Lubricated Chains and Track Groups **NON-Positive Pin
Retention**
VCR5038/44 6Y2058 Chain, 44L, SALT, w/ SML, NON-PPR
VCR5261/44/24 9W5776 Track Group, 44L, SALT, w/ SML, w/ 1 B 24" Shoe, Non-PPR
Your Track Groups
VCR5039/44 Pin and Bushing Group, 44LK Non-PPR ***For Sorefa & ITM Chain Only
VCR5249 9W5266 Track Link, L.H..
VCR5248 9W5265 Track Link, R.H..
VCR3769 6Y1578 Salt Pin
VCR5687 9U8537 Seal Assembly (Arctic) (Replaces 9W5186)
VCR5256 9W9300 Thrust Ring
VCR5255 9W6854 Retainer Ring for Master Pin
V6Y1577 Master Pin
Page 168
VCR5246 Master Link R.H. (2 pieces) (OEM Reference 7T0719+9W5721)
VCR5247 Master Link L.H. (2 pieces) (OEM Reference 7T0720+9W5722)
Track Hardware
V7T1000 7T1000 Track Shoe Bolt (1 1/8")
V5P8221 5P8221 Track Shoe Nut
V7T0998 7T0998 Master Bolt (Long)
V7T0999 7T0999 Master Bolt (Short)
Track Shoes
VCR5040/24 7T0724 Shoe, 1 B 24"
VCR5040/30 Shoe, 1 B 30"
VCR5040/28 7T4607 Shoe, 1 B 28"
VCR5040/32 7T4605 Shoe, 1 B 32"
Bottom Rollers
VCR5041V 125-3268 Roller Assembly, SF (Optional)
VCR5043V 125-3270 Roller Assembly, DF (Optional)
VCR5042 6Y0891 Roller Shell, SF
VCR5044 6Y0892 Roller Shell, DF
V6T1139 6T1139 Mounting Bolt
V3K5234 3K5234 Mounting Washer
V9W6651 Seal Group
Idlers
VCR5045 125-3537 Front Idler Group (4-Required)
VCR5045V 125-3537 Front Idler Group (4-Required) (Optional)
V9W4194 9W4194 Idler Bushing
0955
V7T0955 5 3308
154-3308 d e Shaft
Idler S at
V9W4488 9W4488 Idler Mounting Bolt
Sprockets
V5P5422 Segment Bolt (30-Required)
V5P8250 Segment Washer (30-Required)
V2M5656 Segment Nut (30-Required)
V8P5374 8P5374 Track Guiding Guard (16)
V7X0386 7X0386 Bolt For Track Guiding Guard 7/8"-9 X 3.1/2" (32)
V9H1031 9H1031 Washer (32)
V8T1981 8T1981 Track Adjuster Seal
Page 169
MODEL: Caterpillar D11N, D11R
Specs 12.50" (317.5mm) Pitch & 1 3/8" Track Shoe Bolt
Serial Nos: D11N: (41LK) 8-S/F Rollers, 8-D/F Rollers
D11R: (41LK) 8-S/F Rollers, 8-D/F Rollers
Lubricated Chains and Track Groups **NON-PPR**

215-7494 Chain, 41L, SALT, w/ SML, Non-PPR
Your Track Groups
Pin and Bushing Group, 41LK Non-PPR ***For ITM Chain Only***
Bushing Group, 41LK ***For ITM Chain Only***
V6T8050 6T8050 Track Link, L.H.
V6T8049 6T8049 Track Link, R.H.
126-5343 Salt Pin
202-0908 Salt Bushing
V2227007 222-7007 Seal Assembly
256-6084 Thrust Ring
6Y0472 Retainer Ring for Master Pin
Master Pin (Required ONLY for non-PPR ITM Chain)
Master Link R.H. (2 pieces) (Consists of 229-3525 & 229-3527)
Master Link L.H. (2 pieces) (Consists of 229-3526 & 229-3528)
Track Hardware
V6T8853 6T8853 Track Shoe Bolt
V3T6292 3T6292 Track Shoe Nut
V6T8520 6T8520 Master Bolt (Long)
V6T8521 6T8521 Master Bolt (Short)
Track Shoes
CR5665/28 153-4874 Shoe, 1 B 28" ESS
CR5665/32 153-4876 Shoe, 1 B 32" ESS
CR5665/36 153-4963 Shoe, 1 B 36" ESS
CR5666/28 153-4875 Shoe, 1 B 28" ESS, MASTER
Bottom Rollers
184-6305 Roller Assembly, SF (CR5614)
184-6306 Roller Assembly, DF (CR5615)
186-5319 Roller Shell, SF
186-5318 Roller Shell, DF
V9W7269 9W7269 Mounting Bolt
V4K0684 4K0684 Mounting Washer
V1627864 162-7864 Seal Group
Carrier Rollers
184-6305 Carrier Roller (2-Required) (S/F ROLLER USED AS TOP CARRIER)
Idlers
VCR5676V 156-0313 Front Idler Group (4-Required)
258-4614 Idler Bushing
156-5351 Idler Shaft
155-9879 Seal Group
V8T5881 8T5881 Idler Mounting Bolt
V7D5238 7D5238 Washer
Sprockets
CR5670 Segment Group (4 pcs - 23 teeth) (Consists of: 3 each 231-9486 & 1 ea 231-9484)
V7T1243 7T1243 Segment Bolt (32-Required)
Page 170
V3S1349 3S1349 Segment Washer (32-Required)
V3S1356 3S1356 Segment Nut (32-Required)
Page 171
MODEL: Caterpillar 311, 311B, 312, 312B
Serial Nos: 311: 5PK1-UP, 9LJ1-UP (41LK)
311B: 2LS1-UP, 8GR1-UP (41LK)
312: 6BL1-UP, 6GK1-UP (43LK) - (14) S/F Roller - (2) T/C Roller
312B: 6SW1-UP, 9NW1-UP, 2NS1-UP, 8JR1-UP, 9GR1-UP (43LK)
312B: 2KW1-UP, 9FS1-UP, 3FS1-UP (46LK) - (14) Bottom Roller
Confirm Link Count Before Ordering
** Note: OEM Chains have cotter pin style master links **

VCR4854/41 Use Unsealed or Sealed & Greased Chains
VCR4855/43/20 Use VCR4855/4320H
VCR4855/43/24 Use VCR4855/4324H
VCR4855/43/28 Use VCR4855/4328H

Your Track Groups
VLS690BDRY Link Segment
VCR4876/47 Pin and Bushing Group, 47LK Sealed
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
UnSealed Chains and Track Groups
Your Track Groups
VCR4876/47 Pin and Bushing Group, 47LK Unsealed
VT55263HD Track Pin
VCR3197HD Spacer
Sealed & Greased Track Chains and Track Groups
VCR4855/41/20 Track Group, 41L, Sealed & Greased, w/ Master Pin, w/ 3 B 20" Shoe
Page 172
Your Track Groups
VCR4876/47HD Pin and Bushing Group, 47LK With "M" Type Seal
VT55263HD Track Pin
VT75426HD Track Link
Link, R
R.H..
H
VT55263HD Track Pin
Track Shoes
Track Hardware
V7H3597 Track Shoe Bolt, 5/8" (AT173248)
V1M1408 Track Shoe Nut, 5/8" (AT128416)
Bottom Rollers
VCR5108V Roller Assembly (12-Required)
V8T0281 Roller Mounting Bolt - M16 X 80mm
V5P8247 Roller Mounting Hard Washer - 5/8"
Carrier Rollers
Page 173
V990178V Carrier Roller (2-Required)
V6V8133 Bolt
Idlers
V4I7337V 4I7337 Idler With Brackets
V6V5686 Idler Mounting Bolt
Sprockets
V4I7472V Sprocket (15-Bolt Hole)
V8T0375 Bolt (15 per sprocket)
Page 174
MODEL: Caterpillar 205, 205LC, 211, 211LC, 213B
Specs 6.750" pitch, link height = 94.5 mm, Bushing OD =
Serial Nos: 205: 3HC287-UP (47L)
205 LC: 4DC510-UP (47L)
211: 5CC364-UP (47L)
211 LC: 4EC270-UP (51L)
213B: 1EJ1-UP (51L)

Your Track Groups
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
VCR4854/47F Track Chain
Chain, 47L
47L, Unsealed
Unsealed, w/ Master Pin
VCR4854/51F Track Chain, 51L, Unsealed, w/ Master Pin
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Your Track Groups
VT55263HD Track Pin
Page 175
VT55263HD Track Pin
Track Shoes
VCR3600/24M Track
T k Shoe,
Sh w// 2 B 600mm
600 w// Mud
M d Hole
H l
Track Hardware
Bottom Rollers
VPC377 Roller Excavator Style
VPC377V Roller Excavator Style (Optional)
Carrier Rollers
Idlers
Sprockets
Page 176
MODEL: Caterpillar 215, 215LC Excavator
Serial Nos: 215: 14Z1-431, 57Y1-2030, 96L1-UP (44 LK)
215LC: 14Z1-UP, 96L1-UP (51LK)
***For Older Machines with 9/16" Bolt Diameter sub to the 5/8" Bolt
Diameter Chain

VCR3253/44 Chain 44LK Sealed w/Master Pin-(Old 9/16" Bolt Hole)
VCR3253/51 Chain, 51L, Sealed, w/ Master Pin-(Old 9/16" Bolt Hole)
Your Track Groups
VCR3254/51 Pin & Bushing Group, 51 LK Sealed With Master Pin
VCR3198 Link, R.H.
VCR3199 Link, L.H.
VCR3338 Track Pin
VCR3341 Master Pin
VCR2562 Seal Washer
VCR3197 Spacer
Track Shoes
VCR3255/28 6A7527 Shoe, 3 B 28"
Track Hardware
V7K2017 Track Nut, 9/16" (Hex or Square)
Bottom Rollers
VCR3000 Roller Group
VCR3000V Roller Assembly (Optional)
Carrier Rollers
Sprockets
VCR3974 Sprocket Rim (23 Teeth)
VCR3974V Sprocket Rim (23 Teeth) (Optional)
Page 177
MODEL: Caterpillar 215 Excavator (Narrow Chain)
Serial Nos: 215: 14Z432-760 (44 LK)
215 LC (51 LK) 14Z432-760

Your Track Groups
VCR4150/44 Chain, 44L, Sealed, w/ Master Pin (Bushing OD = 53.8 mm)
VCR4151/44/24 Track Group, 44L, Sealed, w/ Master Pin, w/ 3 B 24" Shoe (5/8 Bolt Hole)
Your Track Groups
VCR3338 Pin
VCR3341 Master Pin
VCR3339 Bushing
VCR2562 Seal Washer
VCR3197 Spacer
Track Shoes
VCR4152/20 Shoe, 3 B 20" (without mud hole)
VCR4152/24 3T3647 Shoe, 3 B 24" (without mud hole)
VCR4152/28 Shoe, 3 B 28" (without mud hole)
Track Hardware
Bottom Rollers
VCR3000 Roller Group
VCR3000V Roller Assembly (Optional)
V9W7207 Seal Group
V6Y4744 Bushing
Carrier Rollers
VCR3109 Carrier Roller Shell*
Idlers
VCR3973 Front Idler Shell with bushings
V9W7207 Seal Group
Sprockets
VCR3974V Sprocket Rim (23 Teeth) (Optional)
Page 178
MODEL: Caterpillar 211B, 213BHD, 215, 215B, 215D, 225,
225LC Excavator (Wide Chain)
Serial Nos:
211B: 6XG1-UP (51L)
213 BHD: 1EJ1-UP (51L)
215: 57Y2031-up;14Z761-up, 95Z-up (51L)
215 LC: 57Y2031-up, 14Z761-up (51 LK)
215B: 2XC1-UP (51L)
215B-LC: 9YB1-up (51LK)
215C: 4HG1-up (51LK)
215D: 9TF1-up (51LK)
225: 51U1-2831, 76U1-1648 (47L)
225 LC: 51U1-2831, 76U1-1648 (54L)
Unsealed Track Chain

VCR4858/51FV Chain, 51L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
VCR3196 Sealed Pin
VCR3194 Master Pin
VCR3197F Spacer
Sealed Track Chain
Your Track Groups
VCR3196 Sealed Pin
Page 179
VCR2562 Seal Washer
VCR3197 Spacer
Sealed & Greased Track Chain
Your Track Groups
VCR4874/51HD Pin & Bushing Group, 51 LK Sealed & Greased
VCR4872HD Track Pin
VCR3197F Spacer
VCR3195HD Bushing
Track Shoes
VCR3248/20 Track
T k Shoe,
Sh w// 3 B 500mm
500
Track Hardware
Bottom Rollers-Qty 16 (standard)-Qty 20 (LC)
VCR1328 Roller Assembly, S/F (S/N 57Y2031-up, 14Z761-up, 9YB1-1036, 2XC)
VCR1328V Roller Assembly, S/F (S/N 57Y2031-up, 14Z761-up, 9YB1-1036, 2XC) (Optional)
V9W7216 Seal Group
V3K6616 3K6616 Shaft
VCR3267 Bushing
VPC377 8E7494 Roller Excavator Type - 57Y2031-up, 14Z761-up, 9YB1-up, 2XC, 95Z-up, 4HG-up, 9TF-up
VPC377V Roller Excavator Type - 57Y2031-up, 14Z761-up, 9YB1-up, 2XC, 95Z-up (Optional)
**Some modification of track guiding guards is required***
Carrier Rollers
VCR2880 Carrier Roller Assembly (4-Required)
VCR2880V Carrier Roller Assembly (4-Required) (Optional)
V9W7216 Seal Group
Idler
Page 180
VCR3975 Idler Shell 19.92" Diameter (215B, 215C, 225 excavator)
VCR3976 Front Idler with Shaft (225: 51U-2831, 76U-1648) (Shaft Diameter 1.75")
VCR3267 Bushing
V9W7216 Seal Group
Sprockets
V3V1727V 3V1727 Sprocket (Cat 215 & 225)
VOK483 3T9153 Sprocket Rim (215 & 225 excavator when using D4D chains)
VOK483V Sprocket Rim (215 & 225 excavator when using D4D chains) (Optional)
Page 181
MODEL: Caterpillar E70, E70B
Specs Bolt Diameter = 1/2"
VMT24/42V Chain, 42 Link, Sealed & Greased
VMT24V Link Segment
VKM949HD Master Pin Group
Track Hardware
V616191C1 Track Bolt 1/2" x 1 11/16
Bottom Rollers
V1273806V Roller, SF (10-S/F Roller)
Carrier Rollers
V1028076V Carrier Roller
Page 182
MODEL: Caterpillar E110, B, E120, B
Specs 6.750" pitch, link height = 94.5mm, Bushing OD =
50.6mm, Bolt Diameter = 5/8"
Serial Nos:
E110: 3FG1- Up, 1MJ1-Up, 3GG1-Up (39LK) 10-Bottom Rollers, 2-Carrier
Rollers
E110B: 5GK1- Up, 8MF1- Up, 9HF1- Up (41LK) 12-Bottom Rollers, 2-Carrier
Rollers
E120: 1LF1-Up, 1MF1- Up (43LK) 10-Bottom Rollers, 2-Carrier Rollers
E120B: 4XK1- Up, 6JF1- Up, 7NF1-Up (43LK) 12-Bottom Rollers, 2-Carrier
Rollers

VCR4854/39 995616 Use Unsealed or Sealed & Greased Chains
Your Track Groups
VCR3196 Track Pin
VCR4873 Master Pin
VCR1616 Bushing (AT128414)
VCR202 Master Bushing (TH100397)
VCR1617 Seal Washer
VCR1619 Spacer
UnSealed Chains and Track Groups
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Page 183
Your Track Groups
VT55263HD Track Pin
VT55263HD Track Pin
Track Shoes
Track Hardware
Bottom Rollers
VCR5108V 4I7346 Roller Assembly (E110B & E120B Models Only) (12-Required)
Carrier Rollers
V990178V Carrier Roller (E110B, E120B Models)
Idlers
V4I7337V 4I7337 Idler With Brackets
Page 184
Sprockets
V4I7472V 099-5350 Sprocket, 21-Tooth, 15-Bolt Hole (For E110B Serial numbers 8MF, 9HF, 5GK)
V990219V 099-0219 Sprocket, 21-Tooth, 15-Bolt Hole (For E120B Serial Numbers 6JF, 7NF, 4XK)
N/A 096-1479 Sprocket, 21-Tooth, 15-Bolt Hole (For E110, E120 S/N: 1LF, 3FG1-101, 3GG1-4908)
VCR5336V 099-3220 Sprocket, 23-Tooth, 16-Bolt Hole (For E110, E120 S/N:1MF,1MJ,3FG102-Up,3GG4909-up
Page 185
MODEL: Caterpillar 215B, 215BSA, 225, 225B, 225BLC,
225LC
Serial Nos:
215B: 4JC1-UP (46LK)
215BSA: 4FC1-735 (46LK)
225: 51U2832-UP, 61X1-UP, 76U1649-UP (46LK)
225B: 2ZD1-549 (46LK)
225BLC: 2ZD1-549 (53LK)
225 LC: 51U2832-UP, 61X1-UP, 76U1649-UP (53LK)
***MUST CONFIRM LINK COUNT***

VCR5035/46 3V9026 Chain, 46L, Unsealed, w/ Master Pin
VCR5035/53 Chain, 53L, Unsealed, w/ Master Pin
VCR5035/53V Chain, 53L, Unsealed, w/ Master Pin (Optional)
VCR5101/46/24 Track Group, 46L, Unsealed, w/ Master Pin, w/ 3 B 24" Shoe
Your Track Groups
VCR4798/53 Pin and Bushing Group, 53LK-Master Pin Type (Heat Treated pins)
VCR4795 Sealed Pin
VCR2163X Unsealed Bushing
VCR5094 Unsealed Master Bushing
VCR1605 Unsealed Master Pin
VCR2166 Seal Washer
VCR2165 Spacer
Track Shoes
VCR3229/20 Shoe, 3 B, 20" (with Mud Hole) 225 Excavator
Track Hardware
Bottom Rollers-Qty 16 (Standard)-Qty 20 (LC)
VPC395 Roller Assembly, S/F-Excavator Style(S/N-51U6255-up;76U5159-up;4CF351-up)
VPC395V Roller Assembly (Optional)
VCR1292 118-1611 Roller Assembly, S/F(S/N-51U2832-6254;76U1649-5158;4CF1-350;4JC)
VCR1292V 118-1611 Roller Assembly, S/F(S/N-51U2832-6254;76U1649-5158;4CF1-350;4JC) (Optional)
Carrier Rollers
V9W6647 Seal Group
Idlers
Page 186
VCR5127V Idler w/Brackets
VCR3978 Idler w/Shaft (Shaft Diameter 2.125")
VCR3977 Front Idler Shell
V9W7216 Seal Group
Sprockets
VCR5090V 6W2451 Sprocket (For 225 Model)
VCR3979 Sprocket Rim Weld On(23 Teeth)(215B S/N: 4JC1-Up, 215BSA S/N: 4FC1-735, 225 S/N:
51U2832-Up, 76U1649-Up, 225B S/N: 2ZD1-549)
VCR3979V Sprocket Rim Weld On(23 Teeth)(215B S/N: 4JC1-Up, 215BSA S/N: 4FC1-735, 225 S/N:
51U2832-Up, 76U1649-Up, 225B S/N: 2ZD1-549) (Optional)
V9W7228 Seal Group
Page 187
MODEL: Caterpillar EL180
Serial Nos: E180: 1RF1-Up (48LK)
EL180: 4EF1-Up (52LK)

VHT21/48/600 Track Group, 48L, Sealed, w/ Master Pin, w/ 3 B 600mm Shoe
VHT21/52/600 Track Group, 52L, Sealed, w/ Master Pin, w/ 3 B 600mm Shoe
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Sealed & Greased Chains and Track Groups
V9066724HD Chain, 48L, Sealed & Greased, w/ Master Pin
VHT17/48HDV Chain, 48L, Sealed & Greased
VHT17/52HDV Chain, 52L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VPBG225DRHD Pin and Bushing Group, 48 LK Sealed
VLSE180DRHD Link Segment
VHT19HD Track Link, L.H..
VHT18HD Track Link, R.H.
V6Y8186HD Sealed Pin
VCR2166HD Seal Washer
Track Hardware
V74982325 Track Shoe Nut, 18mm
Track Shoes
VHT20/600 Track Shoe, 3 B 600mm
V99A85 Track Shoe, 2 B 600mm (With Mud Hole)
VZZ1052A0N700 Track Shoe, 2 B 700mm (With Mud Hole)
Bottom Rollers
VMT52 Roller Assembly, S/F-(E180, EL180, E240, EL240, E240B, EL240B, E240C, EL240C)
VMT52V Roller Assembly, S/F (Optional)
Carrier Rollers
Page 188
Idlers
VCR5337V Sprocket
Page 189
MODEL: Caterpillar 215B-SA, 219, 219-LC-219D, 225B,
225B-LC, 225D, 225D-LC-Excavator Style
58.70mm , Bolt Diameter =3/4"
Serial Nos: 215BSA: 4FC 736 -Up (43 LK)
215: 5FC -Up (43 LK)
219 LC: (49 LK)
219D: 5XG -Up (49 LK)
225B: 2ZD 550 -Up (43 LK)
225B-LC: 3YD -Up (49 LK) 20-B/Roller
225D: 2SJ -Up (43 LK)
225D-LC: 6RG -Up (49 LK)
***MUST CONFIRM LINK COUNT***

VCR5013/43/22 Track Group, 43L, w/ Master Pin, w/ 3 B 22" Shoe
Your Track Groups
VCR4798/55 Pin and Bushingg Group,
p 55 LK
VCR4795 Sealed Pin
VCR2166 Seal Washer
Your Track Groups
VPBGE200DHD Pin & Bushing Group, 49 LK Sealed
VCR5098HD Link, R.H.
VCR5099HD Link, L.H.
VCR4795HD Track Pin
V4179765 Master Pin
VCR2166HD Seal Assembly Polyurethane
VCR5096HD Spacer
VCR2163HD Track Bushing
Track Shoes
VCR5012/22 Shoe, 3 B 22"
VCR5012/26 Shoe, 3 B 26"
Page 190
VCR5012/30 Shoe, 3 B 30"
VCR5012/34 Shoe, 3 B 34"
Track Hardware
VCR5110 Roller Assembly, S/F-Excavator Style
VCR5110V Roller Assembly, S/F-Excavator Style (Optional)
VIN3403 Seal Group
V1H5728 O-Ring/Shaft
V7F5227 Mounting Bolt 3/4" X 3.3/4" (NC)
V5P8248 Mounting Washer 3/4"
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR5127V Idler w/Brackets
VCR3978 Idler w/Shaft (Shaft Diameter 2.125")
V9W7216 Seal Group
Sprocket-Not available at this time for other models
V9C2646V Sprocket, 21-Tooth, 16-Bolt Hole (215SA SN 4FC736-Up, 219 S/N 5XG, 225 S/N 6RG, 2SJ,
2ZD550-Up, 3YD, 5CF)
V1D4608 Bolt 3/4" X 2.3/4" (8-Required per side)
V5P8248 Washer 3/4"
3/4 (8 Required per side)
(8-Required
Page 191
MODEL: Caterpillar EL240, E300
Specs: Track Pitch = 7.484", Bushing Diameter= 60mm, Bolt
Hole= 20mm
EL240: 4FJ1-148 (50LK)
E300: 1KG, 2CF 1up (49LK)
Note: Please Verify Link Casting Number And Seal Before Ordering Track
Components. Casting Number 4060B & D7622 Are Old Style Chains.
Contact Your VPI Representitive for parts availability For Older Style Chains
New Style Unsealed Chains and Track Groups

VKM782/49F Chain, 49L, Unsealed, w/ Master Pin
VKM782/49FV Chain, 49L, Unsealed, w/ Master Pin (Optional)
* New Style Chain Casting Number DY569, Please Verify Casting Number for Parts. *
Your Track Groups
VKM1149/47F Pin and Bushing Group, 47Lk Unsealed
VKM1032HDV Track Link L
L.H.
H (Optional)
V031265 Spacer
New Style Sealed & Greased Track Chains and Track Groups
VKM782/49HD Chain, 49L, Sealed & Greased, w/ Master Pin

* New Style Chain Casting Number DY569, Please Verify Casting Number for Parts. *
Your Track Groups
VKM1149/47HD Pin and Bushing Group, 47LK Sealed & Greased
Page 192
Track Hardware
V79035814 Track Bolt, 20mm X 60mm (NON-OEM Track Shoes - Base Plate Thickness = 9-10mm)
V20Y.32.11210 Track Bolt, 20mm X 53mm (OEM Track Shoes - Base Plate Thickness = 7-8mm)
Track Shoes
VKM783/650 Track
T k Shoe,
Sh 3 B 650mm
650
Bottom Rollers
VMT52 Roller Assembly, S/F-(E180, EL180, E240, EL240, E240B, EL240B, E240C, EL240C)
VCR5112 Roller Assembly, S/F-(E300)
VCR5112V Roller Assembly, S/F-(E300) (Optional)
Carrier Rollers
V0960330V 096-0330 Carrier Roller For E300B, EL300, EL300B
V0965260V 096-5260 Carrier Roller For EL240
Sprocket
V959779V Sprocket (EL240 Models)
Page 193
MODEL: Caterpillar E200B, EL200B, E240, E240B,
E240C, EL240, EL240B, EL240C
E200B: 6KF1-Up, 4SG1-Up (45LK)
EL200B: 7DF1-Up, 5EG1-Up (49LK) 16-S/F Roller
E240: 1FG1-Up, 2HF1-Up (46LK)
E240B: 8SF1-Up, 9PF1-Up (46 LK)
E240C: 2RL1-Up (46LK)
EL240: 1FG1-Up, 4JF149-Up (50 LK)
EL240B: 5WG1-Up, 6WG1-Up (50 LK)
EL240C: 9PK1-Up (50LK)

VCR5350/45 Track Chain, 45L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Your Track Groups
VPBGE200DHD Pin and Bushing Group, 49 LK Sealed
VCR5096HD Spacer
Track Shoes
Page 194
Track Hardware
Bottom Rollers
VMT52 Roller Assembly, S/F-( E240, EL240, E240B, EL240B, E240C, EL240C)
VCR5109 Roller Assembly, S/F-(E200B, EL200B)
VCR5109V Roller Assembly, S/F-(E200B, EL200B) (Optional)
Carrier Rollers
V0965260V 096-5260 Carrier Roller For Models E240, E240B, E240C, EL240, EL240B, EL240C
VCR5592 8E5600 Carrier Roller For Model E200B, EL200B Only
VCR5592V Carrier Roller For Model E200B, EL200B Only (Optional)
Sprocket
VCR5338V Sprocket 14-Bolt Hole (For E200B, EL200B Models)
V8T6430 Bolt
VCR5356 Sprocket rim 21-Teeth
V959779V Sprocket 14-Bolt Hole (For E240, EL240, E240B, EL240B E240C, EL240C Models)
V6V3532 Bolt
V0859311 Washer
Idlers
VCR5732 113-2907 Idler with Brackets (E200B, EL200B)
VCR5732V Idler with Brackets (Optional)
V941384V Idler with Brackets (E240 Models)
Page 195
MODEL: Caterpillar 315, 315L, 315BL, 317, 318C, 318BL,
318BN, 320, 320B, 320C, 320N, 320L, 320BL,
322, 322BL 322N, 322L, 322LN, 322BLN, 322C

315: 3ZM1-Up, 4YM1-Up (41LK) 12-Bottom Rollers, 4-Carrier Rollers
315L: 6YM1-Up, 7NM00001-UP (44LK) 14-Bottom Rollers, 4-Carrier Rollers
315BL: 3AW-UP (44LK) 14-Bottom Rollers, 4-Carrier Rollers

317: 4MM1-Up, 9SR00001-Up (44LK) 14-Bottom Rollers, 4-Carrier Rollers
318C: CWP, GPA, MDY (47Lk) 14-Bottom Rollers, 4-Carrier Rollers

318BL: (45LK) 14-Bottom Rollers, 4-Carrier Rollers
318BN: AEJ, 7KZ (45Lk) 14-Bottom Rollers, 4-Carrier Rollers
320: 2DL, 7GJ, 3XM, 7WK, 4ZJ1-Up, 3RK, 8LK (45LK) 14-Bottom Rollers, 4-
Carrier Rollers
320B: 5BR00001-Up (45LK) 14-Bottom Rollers, 4-Carrier Rollers
320BL: 6CR00001-Up (49LK) 16-Bottom Rollers, 4-Carrier Rollers
320C: AKH, AMC, APA, BCB, BDC, BEF, CLM, BPR, BCN, CCD, FBA, FBB,
MAA (45Lk) 14-Bottom Rollers, 4-Carrier Rollers
320N: 1XM, 9WG (45 LK) 14-Bottom Rollers, 4-Carrier Rollers
320L: 8HJ, 9KK, 4JM, 4BK, 1TL, 1KL, 3XK (49LK)
322: 7WL (47 LK) 14-Bottom Rollers, 4-Carrier Rollers
322N: 9JL (47 LK)
322L: 9RL (51 LK)
322LN: 4RM (51 LK)
322BL: 1YS (51LK) 16-S/F, 4-T/C
322BLN: 1ZS (51LK)
322C: FED (51LK)

VCR5350/47 117-1373 Track Chain, 47L, Sealed, w/ Master Pin
V6I9450 Track Group, 47L, Sealed, w/ Master Pin, w/ 3 B 700mm Shoe
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Page 196
V6I9450HD Track Group, 47L, Sealed & Greased, w/ 3 B 700mm Shoe
Your Track Groups
VPBGE200DHD Pin and Bushing Group, 49 LK
VCR5096HD Spacer
Track Shoes
Track Hardware
V9W3619 Track Shoe Bolt, 20mm X 55mm
V6Y0846 Track Bolt 20mm X 63mm ** Note: For ESS and Double bar shoes **
Bottom Rollers
VCR5109 Roller Assembly, S/F-(320L, E200B, EL200B)
VCR5109V Roller Assembly, S/F-(320L, E200B, EL200B) (Optional)
VCR5726 Roller Assembly, S/F-(322)
VCR5726V Roller Assembly, S/F-(322) (Optional)
Carrier Rollers
Page 197
VCR5592 Carrier Roller (320, 320B, 320C & 322) (4-Required)
VCR5592V Carrier Roller (320, 320B, 320C & 322) (Optional)
Idlers
VCR5732 113-2907 Idler with Brackets (For Models 315, 317, 318, & 320, 320B, 320C)
VCR5732V Idler with Brackets (Optional)
VCR5786V 115-6337 Idler with Brackets (For Models 322 & 322B )
V1156424 Track Adjuster Spring Assembly (For 320B Model)
V1453028 Track Adjuster Spring Assembly (For 320C Model)
Sprockets
VCR5606V Sprocket (315 Model)
VCR5602 8E9805 Sprocket Rim (320, 320B, 320C & 322) (Use With CR5350/ Chains)
VCR5602V Sprocket Rim (320, 320B, 320C & 322) (Optional) (Use With CR5350/ Chains)
V7X2562 Sprocket Bolt (16-Required)
235-5260 Sprocket Rim, 21-Tooth (Use With Heavy Duty Link Assembly Only, 320, 320B, 320C
Models)
187-6540 Sprocket Rim, 21-Tooth (Use With Heavy Duty Link Assembly Only. For 320C, SN: BGB)
221-0010 Sprocket Rim, 21-Tooth (Use With Heavy Duty Link Assembly Only. For 320C, S/N: SAH)
Page 198
MODEL: Caterpillar 225SA, FB227, 229D,229DLC, 231D,
231D-LC, 235, 235LC
Specs Track Pitch = 7.984", Link Height = 121.5 mm,
Bushing O.D.= 66.5 Bolt Diameter = 3/4"
Serial Nos: 225SA:
FB227: 10W174 -Up (47 LK)
229D: 2LJ1 -Up (47 LK)
229D LC: (54 LK)
231D: 1NK1 -Up; 5WJ1 -Up (47LK)
231D LC: (54 LK)
235: 32K1 - 32K1300, 64R1-595 (47LK)
235LC: 32K1 - 32K1300 (54LK)

Your Track Groups
VCR3172 Link, R/H
VCR3173 Link, L/H
VCR1783 Track Pin
VCR1789 Master Pin
V082532 Spacer
VCR1787HDM Master Bushing
Your Track Groups
VCR5067/47 Pin & Bushing Group 47 Link With Master Pin
VCR5055 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
New Style Sealed & Greased Track Chains "M" Type Seal and
Track Groups 121.5mm Link Height
**Note: Current Sealed & Greased Track Chains Produced With " M" Type Seals.
Please Confirm Style Of Chains Before Ordering Components
Your Track Groups
VCR5067/47HD Pin & Bushing Group 47 Link
VCR5059HDM Link Segment
Page 199
VCR5055HDM Sealed Pin
VCR5066HDM Master Pin Complete
VCR1784HDM Sealed Bushing
VCR1787HDM Sealed Master Bushing
VCR5056HD Sealed Master Pin
VCR1630HDM Seal, Polyurethane "M" Type
VCR1632HDM Master Seal (For Master Pins)
VLS227HDDRY Link Segment
V8M7231HD Seal-Polyurethane
VCR1632HD Spacer
Track Hardware
Track Shoes
V3Q5391 3Q5391 Track Shoe, 1 B 24" ESS, w/ CC/Mud Hole
V3Q5391V 3Q5391 Track Shoe, 1 B 24" ESS, w/ CC/Mud Hole (Optional)
VCR4828/28CM Track Shoe, 1 B 28" ESS, w/ CC/Mud Hole
VCR3324/24M Track Shoe, 2 B 24", w/ Mud Hole
VCR3324/24MV Track Shoe, 2 B 24", w/ Mud Hole (Optional)
VCR3324/36 Track Shoe, 2 B 36", w/o Mud Hole
Bottom Rollers
VCR1793 Roller Assembly, S/F (5/8" bracket bolt hole) 227: 10W-215, 235: 32K-1300
VCR1793V Roller Assembly, S/F (5/8" bracket bolt hole) 227: 10W-215, 235: 32K-1300 (Optional)
VCR3634 Roller Assembly, S/F (3/4" bracket bolt hole) 227: 10W216-342
VCR3634V Roller Assembly, S/F (3/4" bracket bolt hole) 227: 10W216-342 (Optional)
VCR5111V Roller Assembly, S/F-Excavator Style (Optional)
Carrier Rollers
Sprockets
Page 200
MODEL: Caterpillar E300B, EL300, EL300B
Specs 8.00" pitch, Link Ht = 116.4mm, Bushing O.D. =
66.3mm & 20mm Bolt Diameter
E300B: 1WJ1-Up (46LK)
EL300B: 3FJ1-Up (50LK) (16 Bottom Rollers - 4 Top Roller)
EL300: 4NF (50LK)

Your Track Groups
VKM959F Link Segment
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM173 Master Pin Group
VKM1403V Master Pin Group (V-Track "T" Headed)
VKM1366 Master Pin
VKM171TH Master Bushing
VKM959/46 099 5998
099-5998 Use KM959/46F or KM959/46HD
VKM959/50 099-2658 Use KM959/50F or KM959/50HD
VKM970/46/600 Use KM970/46600H
VKM970/50/600 Use KM970/50600H
Your Track Groups
VKM1406/47 Pin and Bushing Group, 47LK (AT170093)
VLSPC300DRY Link Segment
VKM1034 Track Link, L.H.. (AT159076)
VKM1033 Track Link, R.H.. (AT159075)
VKM1365 Sealed Pin (AT130913)
VKM170TH Sealed Bushing (TH103167)
VKM173 Master Pin Complete (AT130913)
VKM171TH Master Bushing (AT159080)
VCR1630 Seal Washer (AT171645)
VCR1632 Spacer (AT159079)
V992658HD Chain, 50L, Sealed and Greased, w/ Master Pin
VKM970/46600H Track Group, 46L, Sealed & Greased, w/ Master Pin, w/ 3 B 600mm Shoe
Your Track Groups
VKM1406/47HD Pin & Bushing Group 47LK Sealed
VKM1034HD Track Link L.H..
VKM1033HD Track Link R.H..
Page 201
VKM1365HD Track Pin
VCR1632HD Spacer
VKM70HD Bushing
Track Hardware
V155.32.11210 4143721 Track Shoe Bolt, 20mm X 68mm
V79035814 Track Shoe Bolt, 20mm X 60mm (Check Shoe Thickness - Use for Thin OEM Shoe)
Track Shoes
VSJ.0264/0610 Track Shoe, 1 B 24", w/ CC/Mud Hole
V85193 Track Shoe, 1 B 28", w/ CC/Mud Hole
VZV0652A0N600 Track Shoe, 2 B 24", w/ Mud Hole
Bottom Rollers
VCR5112V Roller Assembly, S/F (Optional)
Carrier Rollers
0960330
V0960330V 096 0330
096-0330 Ca e Roller
Carrier o e For
o E300B,
300 , EL300,
300, EL300B
300
Idlers
V960253V Idler With Brackets
Sprockets
V994129V 099-4129 Sprocket
Page 202
MODEL: Caterpillar 325, 325L,325BL, 325N, 325LN
Specs Track Pitch = 8.0", Link Ht.= 115mm, Bushing Dia.=
64mm, Bolt Diameter = 20mm
325: 8NL, 6RM, 8JG, 7TG, 8YK, 5WK, 9SG, 9ZK (45LK)
325: 2JR00001-Up(48LK) 16 S/F Roller, 4 T/C Roller
325BL: 6DN00001-Up(48LK) 16 S/F Roller, 4 T/C Roller
325BLN: 8FN00001-Up(48LK) 16 S/F Roller, 4 T/C Roller
325LN: 3LL1-Up(48LK) 16 S/F Roller, 4 T/C Roller
325L: 2JK, 7CJ, 7LM, 9KL, 6KK, 8NK, 2SL1-Up, 7LJ1-Up (48LK)
325N: 2SK1-Up (48LK) 16 S/F Roller, 4 T/C Roller

V6Z7825 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 1 B 600mm Shoe CC/MH
V6Z7825V Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 1 B 600mm Shoe CC/MH (Option)
VCR5488/45700 8E6047 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 700mm Shoe
VCR5488/45800 6Y2131 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 800mm Shoe
VCR548845800V 6Y2131 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 800mm Shoe (Optional)
VCR5488/45900 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 900mm Shoe
Your Track Groups
VCR5501/45HD Pin
Pi & Bushing
B hi Group
G 45Lk S
Sealed
l d&G Greased (For Old Style
d (F St l Chain
Ch i E1627700S000)
VCR5501/48HD Pin & Bushing Group 48Lk Sealed & Greased (For New Style Chain EY627700M000)
VCR5500HDV Master Pin Complete (V-Track "T" Headed)
VCR5497 Spacer
Track Shoes
VCR5505/600 6I9854 Track Shoe, 1 B 24" ESS, w/ CC/Mud Hole
VCR5505/700 1Q4752 Track Shoe, 1 B 28" ESS, w/ CC/Mud Hole
VCR5504/600 Track Shoe, 2 B 600mm, w/ Mud Hole
VCR5504/700V Track Shoe, 2 B 700mm, w/ Mud Hole (Optional)
VCR5662/600 Track Shoe, 3 B 600mm
VCR5662/800V Track Shoe, 3 B 800mm (Optional)
Track Hardware
V6Y0846 Track Shoe Bolt, 20mm
Carrier Rollers
VCR5595 Carrier Roller (4-Required)
Page 203
V8T6430 Bolt (18-Required)
Bottom Rollers
VCR5525 Roller Assembly, S/F (16-Required)
V7X2565 Bolt
V8T4123 Washer
Sprockets
VCR5604 Sprocket 21-Tooth, 18-Bolt Hole
VCR5604V Sprocket 21-Tooth, 18-Bolt Hole (Optional)
V6V3531 Sprocket Bolt (18 Bolts Per Side)
Idlers
VCR5884 102-8155 Idler Group with Brackets
VCR5884V Idler Group with Brackets (optional)
VC325B Track Adjuster Spring Assembly
Page 204
MODEL: Caterpillar 235 (Old)
Dia.= 71.4mm Track Bolt Diameter =3/4"
Serial Nos: 235: 32K1301 Up, 64R596-Up, 62X Up, 83X Up, 4ED Up, 9PC Up, 7WC Up
(49 LK)
*Ensure to check bolt diameter. Some machines have been

converted to 7/8" (22mm)

VCR5061/49 Chain, 49L, Unsealed, w/ Master Pin (Bushing OD = 71.4mm)
Your Track Groups
VLSD7EDRY Link Segment
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR2527/38 Pin and Bushing Group, 38 LK (Order separate components to fill to 49LK)
VCR5061/49HD Chain, 49L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4mm)
Your Track Groups
VCR4727HD Track Pin
VCR4728 Master Pin
Track Hardware
Track Shoes
VCR4839/30 Shoe, 3 B 30" (with Mud Hole) 235 Excavator
VCR4839/36 Shoe, 3 B 36" (with Mud Hole) 235 Excavator
VCR3459/24 Shoe, 2 B 24" (w/o Mud Hole)
Bottom Rollers
V9W6647 Seal Group
V8S2539 Bushing
Carrier Rollers
Page 205
V9W6647 Seal Group
Idlers
V9W6647 Seal Group
Sprockets
VCR3980 Sprocket Rim (24 teeth)
VCR3980V Sprocket Rim (24 teeth) (Optional)
Page 206
MODEL: Caterpillar 235, 235B, 235C Excavator
Serial Nos: 235: 64R 2237 -Up, 83X 733 -Up (49 LK)
235B: 4ED 282 -Up, 7WC 536 -Up, 1FC 1 -Up (49 LK)
235C: 5AF1 -Up, 3WG1 -Up, 2PG1 -Up, 4 DG1-Up (49 LK) 18 B/R - 4 T/C

Your Track Groups
VCR4247 Link, R.H.
VCR4248 Link, L.H..
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR4235/49HD Chain, 49L, Sealed & Greased w/ Master Pin (Bushing OD = 71.4
Chain 49L 71 4 mm)
VCR4235/49HDV Chain, 49L, Sealed & Greased w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Shoes
Page 207
Bottom Rollers
VLH27 Roller Assembly, S/F **Excavator Style** (235 83X665-up, 64R2014-up, 7WC32-up, 9PC,
1FD-up, 4ED1-up, 5AF-up, 2PG, 3WG, 4DG)Can use w/ early machine with mod to guards
VLH27V Roller Assembly, S/F Excavator Style (Optional)
V9W6647 Seal Group
V8S2539 Bushing
Carrier Rollers
V9W6647 Seal
S lG Group
Idlers
VCR5132 Front Idler Group with Brackets
VCR5132V Front Idler Group with Brackets (Optional)
V9W6647 Seal Group
Sprockets
VCR3980 Sprocket Rim (24 teeth)
VCR3980V Sprocket Rim (24 teeth) (Optional)
VCR5097 Sprocket Complete - 235C
Page 208
MODEL: Caterpillar 330, 330B, 330BL, 330L, 330LN,
330BLN
Specs Track Pitch = 8.5", Link Ht.= 124mm Bushing Dia.=
Serial Nos: 330: 2ZM, 8RL, 9NG, 9PJ, 9WJ, 6ZW (45LK)
330B: 4YW, 5EZ, 8SR, 9HN (45LK)
330BL: 3YR, 6DR, 4RS, 5LS (49LK) 16-Bottom Rollers, 4-Carrier Rollers
330L: 5YM, 9ML, 6SK, 8FK, 6WJ, 2EL (49LK)
330LN: 8CK (49LK)
330BLN: 5LR (49LK)

V6Y2755HD Chain, 45L, Sealed & Greased, w/ Master Pin
V6Y2755HDV Chain, 45L, Sealed & Greased, w/ Master Pin (Optional)
VCR5930/45600 116-1259 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 600mm Shoe
V6Y2754/49/28 Track Group, 49L, Sealed & Greased, w/ Master Pin, w/ 2 B 700mm Shoe, w/ Mud-Hole
V6Y8181 Track Group, 49L, Sealed & Greased, w/ Master Pin, w/ 3 B 850mm Shoe
Your Track Groups
D16305C0N00049 Pin & Bushing Group 49 LK Sealed With "M" Type Seal
D1630001M01 Track Link, R.H.
D1630001M02 Track Link, L.H.
E1630001M50 Master Link Complete R.H.
E1630001M60 Master Link Complete L.H.
D16300A0N24 Sealed Pin
D16300C0N23 Sealed Bushing
D16300A0N27 Sealed Master Bushing
V6Y2748 Sealed Master Pin "T" Headed Style &** Will Not Interchange With OEM **
V957944HD Cotter Pin
D16300A0N42 Seal Washer-Polyurethane "M" Type
V6Y2749HD Spacer
V1374125HD Pin & Bushing Group 49 LK Sealed
V6Y2589HD Track Link, R.H.
V6Y2590HD Track Link, L.H.
V1187302HD Master Link Complete R.H.
V1187303HD Master Link Complete L.H.
V1230025HD Sealed Bushing
V1230026HD Sealed Master Bushing
V6Y2750HD Seal Washer-Polyurethane
Page 209
V6Y2749HD Spacer
Track Shoes
V6I9893 6I9893 Track Shoe, 1 B 24" ESS, w/ CC/Mud Hole
V6I9893V 6I9893 Track Shoe, 1 B 24" ESS, w/ CC/Mud Hole (Optional)
VCR5929/600 6Y2757 Track Shoe, 3 B 600mm (1265066)
VCR5929/750V 6Y2756 Track Shoe, 3 B 750mm (1265067) (Optional)
VCR5929/850 6Y8180 Track Shoe, 3 B 850mm
VCR5929/850V 6Y8180 Track Shoe, 3 B 850mm (Optional)
V3Q6992 Track Shoe, 2 B 28", w/ Mud Hole
V3Q6992V Track Shoe, 2 B 28", w/ Mud Hole (Optional)
VCR5928/700 Track Shoe, 2 B 28", w/ Mud Hole
Track Hardware
V6Y9024 Track Shoe Bolt, 22mm X 66mm
V1434891 Track Shoe Bolt, 22mm X 73mm (Use w/2-Bar or THICK base plate track shoe)
Carrier Rollers
VCR5595 Carrier Roller
Bottom Rollers
VCR5897 Roller Assembly, S/F (24mm Bolt Hole)
V7X2454 Bolt 24mm
V8T4167 Washer
Idlers
VCR6087 Idler w/Brackets
VCR6087V Idler w/Brackets (Optional)
VC330B Track Adjuster Spring Assembly
Sprockets
V6Y5685 Sprocket 23-Tooth, 16- Bolt Hole
V6Y5685V Sprocket 23-Tooth, 16- Bolt Hole (Optional)
V7X2575 Sprocket Bolt (16-Required per sprocket)
Page 210
MODEL: Caterpillar 345B, 345BL
71.3mm, Bolt Diameter = 24mm
Serial Nos:
345B: 2NW, 6MW, 6XS, 8KW, AGS, AMD, AMN (49LK) 18-Bottom Rollers
345BL: 2SW99-Up, 4SS357-Up, 5WS, 7KS200-Up, 9GS166-Up, 8RW, 9CW

(52LK) 18-Bottom Rollers
Note: Confirm Link Count before Ordering Track Chains

V1504780 150-4780 Track Chain, 49L, Unsealed, w/ Master Pin
V1504745 150-4745 Track Chain, 52L, Unsealed, w/ Master Pin
OEM CAT Track Hardware WILL NOT Work With ITM Chain - Must Use VPI Product
Your Track Groups
V2066004 206-6004 Pin & Bushing Group 52LK
V1504748 150-4748 Link, R/H
V1504749 150-4749 Link, L/H
VCR4727 8E4272 Trk Pin
VCR1537 8E4273 Master Pin
VCR1539 1M3669 Trk Bushing
VCR1542 1M3670 Master Bushing
VCR1541 8M6239 Seal Washer
VCR1540 8M6238 Spacer
V2310842 Track Chain
Chain, 49L
49L, Sealed & Greased
Greased, w/ Master Pin
VCR6594/49V Track Chain, 49L, Sealed & Greased, w/ Master Pin (Optional)
V2310841 Track Chain, 52L, Sealed & Greased, w/ Master Pin
VCR6594/52V Track Chain, 52L, Sealed & Greased, w/ Master Pin (Optional)
OEM CAT Track Hardware WILL NOT Work With ITM Chain - Must Use VPI Product
Track Hardware
V175.32.11210 Track Bolt 24mm X 76.2mm
V178.32.11220 150-4742 Track Nut 24mm
Track Shoes
Rollers
V1787293V Bottom Roller
Carrier Rollers
Idlers
Page 211
V1156366V 115-6366 Idler with Brackets (CR6597)
Sprockets
V1243296V 124-3296 Sprockets
V7X2575 Sprocket Bolt (M24 x 60mm) (20 per side)
Page 212
Specs Track Pitch = 8.968", Link Height = 138 mm, Bolt
Diameter = 1"
Serial Nos: 245: 94L1-465, 95V1-989, 82X1-572, 84X1-597 (51LK)

VCR3127/51 8K4753 Chain, 51L, Unsealed, w/ Master Pin
VCR3127/51V 8K4753 Chain, 51L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
VCR2878/41 Pin & Bushing Group 41LK Sealed
VCR3127 Link Segment
VCR2725 Pin
VCR1560 Bushing
VCR1558 Spacer
Track Shoes
VCR3401/36 Shoe, 3 B 36"
Track Hardware
V9M7445 Track Bolt 1" X 2 31/32 (Use with 2 BAR Shoe)
V3T6308 Track Bolt 1" X 3 5/16 (Use with 3 BAR Shoe)
V2V0250 Track Nut 1"
1 (Stepped Nut)
Bottom Rollers
VCR5124 8E0830 Track Roller S/F
VCR5124V 8E0830 Track Roller S/F (Optional)
Carrier Rollers
VCR3512 Carrier Rollers
VCR3512V Carrier Rollers (Optional)
Sprockets
V2M8810 Sprocket Rim 25T
Page 213
MODEL: Caterpillar 350, 350L
Specs Track Pitch = 9", Link Height = , Bolt Diameter =
22mm
Serial Nos: 350: 2ZL, 7RK, 8HK (47LK) 16-Bottom Rollers, 6-Carrier Rollers
350L: 3ML, 9DK, 9FL (51Lk) 18-Bottom Rollers, 6-Carrier Rollers

8E6089 Chain, 47L, Sealed, w/ Master Pin
Your Track Groups
8E6091 Link, R/H
8E6092 Link, L/H
8E6093 Trk Pin
8E6094 Master Pin
8E6095 Trk Bushing
8E6096 Master Bushing
Track Shoes
V8E6097 8E6097 Shoe, 3 B 600mm W/Mud Hole
V8E6099 8E6099 Shoe, 3 B 900mm W/Mud Hole
Track Hardware
V6Y9024 6Y9024 Track Shoe Bolt, 22mm X 66mm
V79035320 9W4381 Track
T k Nut
N t (22mm
(22 Square))
S
Bottom Rollers
V1890475V 152-4129 Roller Assembly
Carrier Rollers
V8E4623V 8E4623 Carrier Rollers
Idlers
VCR6403V 135-8903 Idler Group
Sprockets
VCR6402V 8E6974 Sprocket
V7X2575 7X2575 Sprocket Bolt (23-Required for each sprocket)
Page 214
O.D.= 85.6 mm Bolt Diameter = 1"
Serial Nos: 245: 94L466-Up, 95V990-Up, 82X573-Up, 84X598-Up (45LK) 18-Bottom
Rollers, 4-Top Rollers
245B: 6MF1-Up, 1SJ1-Up (45LK) 18-Bottom Rollers, 4-Top Rollers
245B-LC

VCR4200/45 8E7857 Chain, 45L, Sealed, w/ Master Pin
Your Track Groups
VCR2508 9S1927 Track Link R/H
VCR2509 9S1928 Track Link L/H
VCR4210 8E7855 Track Pin
VCR4213 8E7856 Master Pin
VCR4211 9G6159 Track Bushing
VCR4212 9G6161 Master Bushing
VCR4250 Complete Master Pin Group
Track Shoes
VCR4705/24 9G7109 Track Shoe, 2 B 24"
VCR4705/30 9G7111 Track Shoe, 2 B 30"
VCR4705/36 9G7113 Track Shoe, 2 B 36"
Track Hardware
V9M7445 Track
T k Bolt
B lt 1X2.31/32
1X2 31/32
V1S6421 Track Nut 1"
Bottom Rollers
VCR2833 9G7045 Track Roller S/F
V9W6647 Seal Group
Carrier Rollers
VCR5120 9G7034 Carrier Rollers
V9W6647 Seal Group
Idlers
VCR5134 6W5557 Idler Group with Brackets
VCR4220 Idler Less Brackets
Sprockets
V7T1310V Sprocket Rim
Page 215
MODEL: Caterpillar 365CL, 365BL
Specs Track Pitch = 10.25", Link Height = 156mm, Bushing
O.D.= 85.6 Bolt Diameter = 27mm
Serial Nos: 365CL: (47LK) 16-Bottom Rollers, 6-Top Rollers
365BL: (47LK) 16-Bottom Rollers, 6-Top Rollers

V6Y7453 6Y7453 Chain, 47L, Unsealed, w/ Master Pin
Note: As Alternative USE VKM596/47 & VKM596/51 - CAT Shoes will fit these chains
Your Track Groups
Track Hardware
144-0805 Track Bolt 27mm (For OEM Chains Only)
144-0806 Track Nut 27mm (For OEM Chains Only)
V195.32.11210 Track Bolt 27mm X 3.2" (Use For ITM/Sorefa Chains Only)
V195.32.11221 Track Nut 27mm (Use For ITM/Sorefa Chains Only)
Idlers
Page 216
MODEL: Caterpillar 375, 375L
O.D.= 85.6 Bolt Diameter = 27mm
Serial Nos: 375: 6NK, 8WJ, 8XG (47LK) 16-Bottom Rollers, 6-Top Rollers
375L: 1JM, 6RL, 9WL (51LK)

V6Y7453 6Y7453 Chain, 47L, Unsealed, w/ Master Pin
V1070669 107-0669 Chain, 51L, Unsealed, w/ Master Pin
Note: As Alternative USE VKM596/47 & VKM596/51 - CAT Shoes will fit these chains
Your Track Groups
6Y6721 Link R/H
6Y6722 Link L/H
VCR3940 2M5652 Trk Pin
V8M6910 8M6910 Master Pin
8E1886 Trk Bushing
V8E1887 8E1887 Master Bushing
Track Hardware
V6Y7432 6Y7432 Track Bolt 27mm (For OEM Chains Only)
V6Y7433 6Y7433 Track Nut 27mm (For OEM Chains Only)
V195.32.11210 Track Bolt 27mm X 3.2" (Use For ITM/Sorefa Chains Only)
V195.32.11221 Track Nut 27mm (Use For ITM/Sorefa Chains Only)
Bottom Rollers
152-4130 Roller Assembly S/F
152-4135
152 4135 Roller Assembly D/F
Carrier Rollers
6Y8168 Carrier Rollers
Idlers
Sprockets
V8E4686V 8E4686 Sprocket
V7Y1810 7Y1810 Sprocket Bolt (23-Required for each sprocket)
V9X8399 9X8399 Sprocket Washer 23-Required for each sprocket)
Page 217
MODEL: Cat Paver AP1050, PR450, PR450C, AP650B,
BG225C, BG245C, SF250B, SF350, TR225B
Specs 6.125" pitch, link height = 88mm, Bushing OD =
50mm, 9/16" track shoe bolt hole
Serial Nos:
AP1050: (50Lk)
AP1050B: (50Lk)
PR450: (28Lk)
PR450C: (28Lk)
AP650B: (46Lk)
BG225C: (46Lk)
BG245C: (50Lk)
SF250B: (50Lk)
SF350: (35Lk)
TR225B: (32Lk)

Your Track Groups
VCR2678 Track Pin
VCR3014 Seal Washer
Track Hardware
Track Shoes
V1G5515 Track Shoe, 14" Poly Bonded
V1G5516 Track Shoe, Master, 14" Poly Bonded
Bottom Rollers
VCR3000 Roller Assembly, S/F (For AP1050B Model)
VCR3000V Roller Assembly, S/F (Optional) (For AP1050B Model)
Carrier Rollers
Sprockets
5E7937 Sprocket, 16- Bolt Hole (For AP1050)
105-8884 Sprocket, 20- Bolt Hole (For AP1050B, AP650B, BG225C, BG245C)
Idlers
Page 218
MODEL: Cat Paver PM565, PM565B, PR750B, PR750C,
PR1000, PR1000C, SF500, TR500, SF550
Specs Pitch = 6.75, Link Ht = 96.0mm, Bolt Hole = 5/8",
Bushing OD = 53.8 mm
Serial Nos:
PM565: (26Lk)
PM565B: (26Lk)
PR750B: (32Lk)
PR750C: (32Lk)
PR1000: (32Lk)
PR1000C: (32Lk)
SF500: (38Lk)
TR500: (38Lk)
SF550: (32Lk)

VCR2849/26 Chain, 26L, Sealed, w/ Master Pin, 5/8" Bolt Hole
VCR2849/38V Chain, 38L, Sealed, w/ Master Pin, 5/8" Bolt Hole (Optional)
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 Spacer
Track Hardware
V7H3597 7H3597 Track Bolt, 5/8"
Track Shoes
VCR3248/14P Track Shoe 14" Poly Bonded
VCR3602/14P Master Shoe 14" Poly Bonded
Bottom Rollers
VCR6150 Roller Assembly S/F Series III *These rollers have collars* (For PM565, PM565B)
VCR6150V Roller Assembly S/F Series III *These rollers have collars* (Optional) (PM565-PM565B)
VCR1328 Roller Assembly, S/F
Page 219
VCR1328V Roller Assembly, S/F(Optional)
Carrier Rollers
VCR2880 Carrier Rollers (PR750B, PR750C, PR1000, PR1000C, SF500, SF550, TR500)
VCR2880V Carrier Rollers (Optional) (PR750B, PR750C, PR1000, PR1000C, SF500, SF550, TR500)
Sprockets
7X7248 Sprocket, 16- Bolt Hole (For PR750B, PR750C, PR1000, PR1000C)
1G6133 Sprocket, 18- Bolt Hole (PM565, PM565B)
VOK483 Sprocket Rim 23-Tooth (For TR500)
VOK483V Sprocket Rim 23-Tooth (For TR500) (Optional)
Idlers
190-1551 Idler Group (PM565B)
Page 220
MODEL: Cedar Rapids Paver CR361, CR461
Specs Track Pitch = 155.6mm, Link Ht.= 76.8mm, Bushing
Dia.= 42.87mm, Bolt Diameter =9/16"
Serial Nos:
CR361: (43Lk)
CR461: (43Lk)

VAK13/42 Chain, 42L, Unsealed, w/ Master Pin
Your Track Groups
VLH142/37 Pin & Bushing Group 37Lk
VAK13 Link Segment
VAK16 Link, R/H
VAK17 Link, L/H
VCR2678 Track Pin
VCR3012 Master Pin
VCR3550 Spacer
VCR12 Master Bushing Kit (With Seals)
VAK13/42HD Chain, 42L, Sealed & Greased
Your Track Groups
VAK13HD Link Segment
V084194 Link, R/H
V084193 Link, L/H
V084105 Track Pin
V084107 Master Pin
V084108 Spacer
Track Hardware
V4K7038 Track Bolt 9/16" X 1.21/32
Track Shoes
V78406 Shoe 12" Poly Bonded
Bottom Rollers
VCR3000 Roller Assembly S/F
VCR3000V Roller Assembly S/F (Optional)
VCR3001 Roller Assembly D/F
VCR3001V Roller Assembly D/F (Optional)
Page 221
MODEL: Daewoo Solar 130-III, V, Solar 130LC-V
Specs Pitch=6.750", link height = 96.0 mm, Bushing OD =
Serial Nos: 130-III: (43Lk)
130-V: (43Lk)
130LC-V: (46Lk)

VCR4855/4430H p, 44L,, Sealed & Greased,, w/ Master Pin,, w/ 3 B 30" Shoe
Track Group,
Your Track Groups
VT55263HD Track Pin
VT55263HD Track Pin
Track Shoes
Page 222
Track Hardware
Bottom Rollers
VHT49 2270-P1061 Roller Assembly, S/F (For 130-V)
VHT49V Roller Assembly S/F(Optional) (For 130-V)
Carrier Rollers
V2270-1062V 2270-1062 Carrier Roller (For 130-III)
Idlers
2270-1052 Idler Group
Sprockets
V2108-1005AV 2108-1005A Sprocket
Page 223
MODEL: Daewoo 170
Specs Pitch=6.750", link height = 96.0 mm, Bushing OD =
Serial Nos: S170: (49LK) 16-Bottom Rollers
S170-III: (49Lk)
S170LC-V:

Your Track Groups
VCR3196 Sealed Pin
VCR3194 Master Pin
VCR3197F Spacer
VCR4858/49 2272-6042 Chain, 49L, Sealed, w/ Master Pin
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 Spacer
Track Shoes
Track Hardware
Page 224
Bottom Rollers
VPC377 2270-9403 Roller Assembly, S/F-Excavator Type
VPC377V 2270-9403 Roller Assembly, S/F-Excavator Type (Optional)
Carrier Rollers
V2270-1062V 2270-1062 Carrier Rollers
Idlers
2270-4002A Idler Group
Sprockets
2108-1019 Sprocket
Page 225
MODEL: Daewoo 180LC, 200LC, Solar 200LC, 220,III, V
Solar 220LC, III, V
Specs 175.4mm Pitch, Link Height =103.2mm, Bushing
Diameter OD = 58.8mm, 18MM" Bolt Diameter
DH 180LC: (52LK) 18-Bottom Rollers
Solar 200LC: (52LK) 16-Bottom Rollers
Solar 220-III: (46Lk) 16-Bottom Rollers
Solar 220-V: (46Lk) 16-Bottom Rollers
Solar 220LC: (52LK) 16-Bottom Rollers
Solar 220LC-III: (52Lk) 18-Bottom Rollers
Solar 220LC-V: (52Lk) 18-Bottom Rollers

VHT17/52 2272-1025 Chain, 52L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Track Shoes
VHT20/600 Shoe, 3 B 600 mm
VHT20/700 Shoe, 3 B 700 mm
Track Hardware
Bottom Rollers
VPC395 Roller Assembly, S/F (For S200 Model)
VPC395V Roller Assembly, S/F (Optional) (S200 Model)
2270-1098 Roller Assembly (For S220 Models Only)
Carrier Rollers
V2270-1005EV 2270-1005E Carrier Rollers (For S200, S220 Models)
Sprockets
V2108-1014AV 2108-1014A Sprocket 23-Tooth, 22-Bolt Hole (For S200LC, S220LC Models)
V2108-1028AV 2108-1028A Sprocket 21-Tooth, 22-Bolt Hole (For S220-III, V, S220LC-III, V Models)
Idlers
V2270-1108V 2270-1064 Idler With Brackets (S200, S220, S250)
Page 226
MODEL: Daewoo 220LC-2, 220LC-3
Specs Pitch=7.484", Link Ht = 105mm, Bushing O.D. =
60mm & 20mm Bolt Diameter
Serial Nos: DH 220LC-2: (49LK)Bottom Rollers Required (18)
DH 220LC-3: (49LK)Bottom Rollers Required (18)

VKM782/49F 2272-6101 Chain, 49L, Unsealed, w/ Master Pin
VKM782/49FV 2272-6101 Chain, 49L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
V031265 Spacer

Your Track Groups
Page 227
Track Shoes
Track Hardware
V79035814 Track Shoe Bolt, 20mm X 60mm (NON-OEM Track Shoe Base Plate Thickness = 9-10mm)
V20Y.32.11210
V20Y 32 11210 Track
T k Bolt,
B lt 20mm
20 53mm (OEM Track
X 53 T k Shoes
Sh Only
O l - Base
B Plate
Pl t Thickness
Thi k = 7-8mm)
78 )
Bottom Rollers
VPC395 Roller Assembly, S/F (18-Required)
VPC395V Roller Assembly, S/F (Optional)
Carrier Rollers
V2270-1005EV 2270-1005 Carrier Rollers (4-Required)
Page 228
MODEL: Daewoo S250LC-V
Specs
Serial Nos: S250LC-V: Bottom Rollers Required (18)
Bottom Rollers
VPC395 Roller Assembly
Carrier Rollers
V2270-1005EV 2270-1005E Carrier Rollers
Sprockets
V2108-1028AV 2108-1028A Sprocket 21-Tooth, 22-Bolt Hole (For S220-III, V, S220LC-III, V Models)
Idlers
Page 229
MODEL: Daewoo 280, 280-2, 280LC, 280LC-3, 290LC-V,
320, S330-III
Specs Pitch=7.984", Link Ht = 121.5mm, Bushing O.D. =
Serial Nos: DH 280: (47LK)Bottom Rollers Required (16)
DH 280-2: (51LK)
DH 280LC: (51LK)
DH 280LC-3 (51LK)Bottom Rollers Required (18)
S290LC-V: (51Lk) 18-Bottom Rollers
S320: (51Lk) 18-Bottom Rollers
DH 320: (51LK)Bottom Rollers Required (18)
S330-III: (51Lk) 18-Bottom Rollers

Your Track Groups
VKM1406/47 Pin and Bushing Group, 47LK
VKM1034 Track Link, L.H..
VKM1033 Track Link, R.H..
VKM1365 Sealed Pin
VKM170TH Sealed Bushing
VCR1630 Seal Washer
VCR1632 Spacer
Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
Page 230
Your Track Groups
VKM1365HD Track Pin
VAT159078 Master Pin
VCR1632HD Spacer
VTH111227 Snap Ring
VKM170HD Bushing
Track Shoes
VKM971/800V Track Shoe
Shoe, 3 B 800mm (Optional)
Track Hardware
Bottom Rollers
VLH27 2270-9401A Roller Assembly, S/F
VLH27V Roller Assembly S/F (Optional)
Carrier Rollers
V2270-6126V 2270-6126 Carrier Rollers
Sprockets
V2108-1015AV 2108-1015A Sprocket 23-Tooth, 16-Bolt Hole (For 280LC Models)
2108-1024A Sprocket (For DH320 & S320 Models)
Idlers
Page 231
MODEL: Daewoo 330LC-V
Specs
Serial Nos:
Bottom Rollers
VLH27 Roller Assembly
VLH27V Roller Assembly (Optional)
Carrier Rollers
V2270-6126V Carrier Rollers
Sprockets
V2108-1038V 2108-1038A Sprocket
Idlers
Page 232
MODEL: Daewoo 360LC-III
Specs
Serial Nos:
Bottom Rollers
VLH90 2270-9404P Roller Assembly
Sprockets
V2108-4003AV 2108-4003A Sprocket 23-Tooth, 24-Bolt Holes
Idlers
2270-9009A Idler Group
Page 233
MODEL: Daewoo 360LC-V
Specs
Serial Nos:
Carrier Rollers
V2270-9402AV 2270-9402A Carrier Roller
Idlers
2270-9009B Idler Group
Page 234
MODEL: Daewoo Solar 450
Serial Nos: Solar 450: (53LK)Bottom Rollers Required (18)

VMT14/53 Chain, 53L, Sealed, w/ Master Pin
Your Track Groups
VKM1398 Sealed Pin
VKM802 Sealed Bushing
VKM1399 Master Pin (Straight Pin-OEM is using headed pin)
VKM804 Spacer
Track Hardware
V76007851 Track Bolt (22mm)
V79035320 Track Nut
Track Shoes
VCR4236/28M Track Shoe
Shoe, w/ 2 B 28"
28 , w/ Mud Hole
Bottom Rollers
Page 235
MODEL: Daewoo S400LC-III/V, DH450, S450, 450LC-III/V

Serial Nos:
S400LC-III: (50Lk) 18-Bottom Rollers Required
DH450: (53Lk) 18-Bottom Rollers
S450: (53Lk) 18-Bottom Rollers
S450LC-III: (53Lk) 18-Bottom Rollers

VCR4235/50 2272-6161 Chain, 50L, Sealed, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/53 2272-6143 Chain, 53L, Sealed, w/ Master Pin (Bushing OD = 71.4 mm)
Your Track Groups
VCR4247 Link, R.H.
VCR4248 Link, L.H..
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR4235/50HD Chain, 50LK, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/50HDV Chain, 50LK, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Page 236
Track Hardware
Track Shoes
Bottom Rollers
Carrier Rollers
V2270-9402AV Carrier Rollers
Sprockets
V2108-4003AV 2108-4003A Sprocket 23-Tooth, 24-Bolt Holes (For S400LC-III, V Models)
V2108-1031V
V2108 1031V 2108-1031
2108 1031 Sprocket (For S450LC-III,
S450LC III V Models)
2108-9041 Sprocket (For DH450 & S450 Models)
Idlers
2270-9009B Idler Group (S400LC-V)
2270-9405B Idler Group (DH450, S450)
2270-9405E Idler Group (S450LC-III, V)
Page 237
MODEL: Fabtek FT133
Serial Nos: FT133: (46Lk) 16-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VT55263HD Track Pin
VT55263HD Track Pin
Track Shoes
VCR3600/24M Shoe, 2 B With Mud Hole 24"
Track Hardware
Bottom Rollers
Idlers
VPY4042C0Y00 Idler Group with Spring, Hydraulic tension device, seal, and fitting
VPY404500Y00 Idler Group with Spring
VID609 Idler Group with brackets (with long bracket - 360mm)
VID609V Idler Group with brackets (with long bracket - 360mm) (Optional)
VAT104 Idler Group with brackets (with short bracket - 240mm)
VPY404800N00 Spring unit
VPZ704900N00 Hydraulic Tensioner
Sprockets
VR14040M0Y01 Relieved Sprocket (casted)
Page 238
VR14040G0Y01 Sprocket (casted)
Page 239
MODEL: Fabtek FT153
Serial Nos: FT153: (44Lk)

Your Track Groups
VKM53HD Track Link, L.H.
VKM54HD Track Link, R.H.
VKM70HDM Seal "M" Type
Track Hardware
V70598391 Track Shoe Bolt, 18mm
Track Shoes
VID1701/600 Shoe, 1 B 600mm Clipped Corners and Mud Hole
VID1701/700V Shoe, 1 B 700mm Clipped Corners and Mud Hole
VD1A0053 Shoe, 2 B 600mm (With Mud Hole)
V81854 Shoe, 2 B 700mm (With Mud Hole)
VZV020200N710 Shoe, 2 B 710mm (Without Mud Hole)
Bottom Rollers
VKL18 Roller Excavator Style
VKL18V Roller Excavator Style (Optional)
Idlers
VPY4052B0Y00 Idler Group with Spring, Hydraulic tension device, seal, and fitting
VPY405300Y00 Idler Group with Slide Bars and Yoke
VPY405800N00 Spring unit
VPY4059D0N00 Hydraulic Tensioner
Sprockets
VR32110M0Y01 Sprocket
Page 240
MODEL: Fiat Allis FL4, FL4C, FL4CH, FL4D, FL4L, FL4M
Specs Track Pitch = 140mm, Link Ht.= 70mm, Bushing O.D.=

37mm, Bolt Dia.= 12mm
Serial Nos: FL4: (35Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
FL4C: (36Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
FL4CH: (36Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
FL4D: (36Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
FL4L: (36Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
FL4M: (36Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers

VFT1351/35HD Track Chain, 35L, Sealed & Greased, w/ Master Pin
VFT1351/36HD Track Chain, 36L, Sealed & Greased, w/ Master Pin
Your Track Groups
VFT1351HD Link Segment
VFT680HD Track Link R.H.
VFT681HD Track Link L.H.
VFT684HD Track Pin
VFT685HD Track Bushing
VFT1362HD Master Pin
VFT686HD Master Bushing
VFL4HD Seal Polyurethane
Track Hardware
VFT694 Track Bolt 12mm X 40mm
VFT887 Track Nut 12mm
Track Shoes
VFT1234/16P Shoe, 16" Poly
VFT1234/260 79049324 Shoe, 3 B 260mm With Mud Hole
VFT1234/300 79050071 Shoe, 3 B 300mm With Mud Hole
VFT1234/350 Shoe, 3 B 350mm With Mud Hole
Bottom Rollers
VFT2954 Roller S/F
VFT2954V Roller S/F (Optional)
VFT2953V Roller D/F
Carrier Rollers
VLA426 Carrier Rollers
Sprockets
VFT746 Sprocket 27-Tooth 8-Bolt Hole (For FL4, FL4C, FL4CH, FLD Models)
VFT1993 Sprocket 27-Tooth 8-Bolt Hole (For FL4L, FL4M Models)
Idlers
Page 241
MODEL: Fiat Allis FL6
45mm, Bolt Dia.= 9/16"
Serial Nos: FL6: (37Lk) 10-D/F Rollers, 2-Carrier Rollers

VFT905/36 Chain, 36L, Unsealed, w/ Master Pin
Your Track Groups
VFT908 589012 Track Link L/H
VFT907 589011 Track Link R/H
VFT785 79005967 Track Bushing
VFT1348 Master Pin
VFT471 5011869 Track Pin
VFT778 Spacer
Track Hardware
V7H3596 Track Shoe Bolt, 9/16" X 1.15/16"
V7K2017 Track Shoe Nut 9/16"
Track Shoes
VFT1240/500 Shoe, 3 B 500mm
Bottom Rollers
VFT1665 4991645 Roller S/F
VFT1665V 4991645 Roller S/F (Optional)
VFT1666 4989224 Roller D/F
VFT1666V 4989224 Roller D/F (Optional)
Carrier Rollers
Sprockets
VFT812 4955464 Sprocket 27-Tooth 10-Bolt Hole
Page 242
MODEL: Fiat Allis FL5, FL5B, FL7A, FL7B
Serial Nos: FL5: S/N 1T200102 - Up (35Lk) 4-S/F Rollers, 6-D/F Rollers, 2-Carrier
Rollers
FL5B: S/N 1T201820 - Up (35Lk) 6-S/F Rollers, 4-D/F Rollers, 2-Carrier
Rollers
FL7A: (38Lk) 6-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
FL7B: (39Lk) 8-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers

VFT2150/35 79025804 Chain, 35L, Unsealed, w/ Master Pin
Your Track Groups
Track Hardware
V7K2017 Track Shoe Nut 9/16"
Track Shoes
VFT2501/450 Track Shoe, 1 B 450mm
Bottom Rollers
VFT2155 79044271 Roller S/F
VFT2157 79044270 Roller D/F
Carrier Rollers
Page 243
MODEL: Fiat Allis FL8, FL8C
Serial Nos: FL8: S/N Up to 554062 (39Lk) 2-S/F Rollers, 10-D/F Rollers, 4-Carrier
Rollers
FL8: S/N 554063 -Up (39Lk) 2-S/F Rollers, 10-D/F Rollers, 4-Carrier Rollers
FL8C: (39Lk) 2-S/F Rollers, 10-D/F Rollers, 4-Carrier Rollers

Your Track Groups
Track Hardware
Page 244
MODEL: Fiat Allis FL10
Specs Track Pitch = 7", Link Height = 106mm, Bushing
Diameter= 58mm, Bolt Diameter = 5/8"
Serial Nos:
FL10: (40Lk) 2-S/F Rollers, 10-D/F Rollers, 4-Carrier Rollers
Sealed & Lubricated Chains and Track Groups

VFT1928/40 Chain, 40L, SALT, w/ SML
Your Track Groups
VFT1967 Track Pin
VCR3587 Thrust Ring
VCR3433 Plug
Track Hardware
Track Shoes
VFT1731/20 76000711 Track Shoe, 1 B 20"
Bottom Rollers
VFT1910 76029446 Roller Assembly, S/F
VFT1910V 76029446 Roller Assembly
Assembly, S/F (Optional)
VFT1911 76029443 Roller Assembly, D/F
VFT1911V 76029443 Roller Assembly, D/F (Optional)
Carrier Rollers
VFT949 Seal Group
Sprockets
VFT1995
Idlers
VFT1449 Idler Shell
Page 245
MODEL: Fiat Allis FL12, FL14, B, C
Specs Track Pitch = 7.484", Link Ht.= 115mm, Bushing
O.D.= 60mm, Bolt Dia.= 18mm
Serial Nos: FL12, FL14, B,C:(41LK)

VFT1396/39 Chain, 39L, Sealed, w/ Master Pin
VFT1396/41 79004260 Chain, 41L, Sealed, w/ Master Pin
Your Track Groups
VFT1394 79004248 Link L/H
VFT1393 79004247 Link R/H
VFT972 79039325 Pin
VFT973 79004257 Bushing
VFT978 79004258 Master Bushing
VFT1400 Master Pin Complete
Track Hardware
V70598391 79004259 Track Shoe Bolt, 18mm
V74982325 79004261 Track Shoe Nut, 18mm
Bottom Rollers
VFT1929 76029451 Roller Assembly S/F (2-Required)
VFT1930 76029448 Roller Assembly D/F (12-Required)
Carrier Rollers
VFT1570 76029475 Carrier Rollers (4-Required)
V76003974 Seal Group
Sprockets
VFT2112 79031759 Sprocket Rim Bolt-On
V15992731 Sprocket Bolt (16)
V12164427 Sprocket Nut (16)
Page 246
MODEL: Fiat Allis FL14D, FL14E
Serial Nos: FL14D, E:(41LK)

VFT2102/41 76027939 Chain, 41L, Sealed, w/ SML
Your Track Groups
VFT2113 79082232 Master Link Assembly R/H
VFT2114 79082233 Master Link Assembly L/H
VFT2119 79082230 Link R/H
VFT2120 79082231 Link L/H
VFT972 79039325 Pin
VFT2104/41 79079933 Chain, 41L, SALT, w/ SML
Your Track Groups
VFT2105/41 Pin & Bushing Group 41L Sealed & Lubricated
VFT2119 79082230 Link R/H
VFT2120 79082231 Link L/H
VFT2068 79082234 Seal Assembly
VCR3191 79082221 Plug W/Stopper
Track Hardware
V79035814 Track Bolt, 20mm X 60mm
V79035816 Track Nut, 20mm
Bottom Rollers
VFT1929 76029451 Roller Assembly S/F (8-Required) For FL14E Models
VFT1930 76029448 Roller Assembly D/F (4-Required) For FL14E Models
Carrier Rollers
VFT1570 76029475 Carrier Rollers (4-Required) For FL14E Models
V76003974 Seal Group
Sprockets
VFT2112 79031759 Sprocket Rim Bolt-On
V15992731 Sprocket Bolt (16) Sprocket Nut (16)
V12164427
Page 247
MODEL: Fiat Allis HD11E
Specs Track Pitch = 7"
Serial Nos: HD11E:100001 Up
HD11G: 8941 Up

VAC2153/40 Chain, 40L, Sealed, w/ Master Pin
Your Track Groups
Track Shoes
VAC2253/22 Track Shoe 22" 1 Bar
Page 248
MODEL: Fiat Allis HD12G, 12G, 12GB, 1H16D-DC-GC
HD16DP, HD16DP-B
O.D.= 73mm, Bolt Dia.= 3/4"
Serial Nos:

VAC2091/41 Chain, 40L, Sealed, w/ Master Pin
Your Track Groups
Track Hardware
V70655820 Track Bolt 3/4" X 2.1/2"
Track Shoes
VAC1678/20 Track Shoe 1 B 20"
Page 249
MODEL: Gehl CTL60
V08801-30000V 180775 Bottom Roller
V08801-40000V 180477 Front Idler
V08801-35600V Rear Idler
V08801-66210V 180917 Sprocket
Page 250
MODEL: Gehl CTL70
V08811-40300V 181127 Front Idler
V08821-60010V 182792 Sprocket (Serial number 1 to 1389) Sprocket ID 200 mm
V08811-60110V 181147 Sprocket (Serial number 1390 - up) Sprocket ID 242 mm
Page 251
MODEL: Gehl CTL80
V08811-40300V 181127 Front Idler
V08811-60110V 181147 Sprocket
Page 252
MODEL: Hitachi EX25, EX25-2
V63074V 4410040 Rubber Track
Page 253
MODEL: Hitachi EX27U, ZX27U
Page 254
MODEL: Hitachi EX30, EX30-2, EX30U, EX30UR
EX30UR-3, EX33U (STD), EX35-2
Page 255
MODEL: Hitachi EX40, EX40U, EX45, EX45-2, EX50U
ZX40U, ZX50
Page 256
MODEL: Hitachi EX35U, ZX35U, ZX35U-2, ZX40UR
Page 257
MODEL: Hitachi EX35, EX40UR, EX40UR-2
Page 258
MODEL: Hitachi ZX50-2
Page 259
MODEL: Hitachi EX60, EX60-2, EX60-3, EX60LC-2,
EX60LC-3, EX75UR, EX90
Serial Nos: EX60: (37LK) 10-Bottom Roller, 2-Top Roller
EX60-2: (37LK) 10-Bottom Roller, 2-Top Roller
EX60LC-2: (39LK) 10-Bottom Roller, 2-Top Roller
EX75UR: (39LK) 10-Bottom Rollers, 2-Carrier Rollers
EX90: (43LK)
Rubber Tracks
V64772V 4307140 Rubber Track (For EX60-2, EX60-3)
V64776V 4327062 Rubber Track (For EX60LC-2, EX60LC-3, EX75UR)
Sealed Chains
VAT134372 Chain, 37L, Sealed, w/ Master Pin
VAT159890 Chain, 43L, Sealed, w/ Master Pin
VAT134372HD 9096710 Chain, 37L, Sealed & Greased, w/ Master Pin
VAT134372HDV 9096710 Chain, 37L, Sealed & Greased, w/ Master Pin (Optional)
Use 37L & Parts 9128884 Chain, 39L, Sealed & Greased, w/ Master Pin
VAT159890HD Chain, 43L, Sealed & Greased, w/ Master Pin
VAT159890HDV Chain, 43L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VAT170089HD Pin & Bushing Group 37 LK Sealed With Master Pin Note: Currently Not Available From VPI
VAT134373HD Link, R/H
VAT134374HD Link, L/H
VAT134375HD Master Link, R/H Note: Currently Not Available From Valuepart
VTH106074HD Track Pin
VD76063A0N00 Master Pin Complete
VAT134376HD Master Pin
VAT167074HD Seal Polyurethane
VAT134377HD Spacer
VTH110493HD Snap Ring
VAT134379HD Track Bushing
VAT134380HD Master Bushing
Track Hardware
Track Shoes
V2037593 2037593 Shoe, 3 B 450mm
V2030534 AT159894 Shoe, 3 B 500mm With Mud Hole
V2030532 Shoe, 3 B 600mm With Mud Hole
Bottom Rollers
VAT200693 9096970 Roller Assembly, S/F (Inside Flange) (EX60 Model)
VAT200693V 9096970 Roller Assembly, S/F (Inside Flange) (EX60 Model) (Optional)
VTH106259V 9066207 Roller Assembly, S/F (Outside Flange) (EX60 Model)
VAT130491V Roller Assembly (EX90 Model)
Carrier Rollers
Page 260
VTH110962V 9108841 Carrier Roller Assembly
Idlers
V9160965V Idler with Bracket (EX60, EX90)
V9097575V Idler with Bracket (EX60-2, 3)
Sprockets
VTH110360V 1010447 Sprocket-Bolt On-(EX60) 12 Bolt Hole
VAT200345V 1012495 Sprocket-Bolt On-(EX60-2, EX60-3, EX90) 12 Bolt Hole
Page 261
MODEL: Hitachi EX60-5, EX60LC-5, ZX70, ZX75UR, EX80-
5, EX80LC-5, ZX80
Serial Nos: EX60-5: (38LK) 10-Bottom Roller, 2-Top Roller
ZX70: (38LK) 10-Bottom Rollers, 2-Carrier Rollers
ZX75UR: (40LK) 10-Bottom Rollers, 2-Carrier Rollers
EX80-5: (38LK)
EX80LC-5: (40LK)
Rubber Tracks
V64774SV 4392110 Rubber Track (For EX60-5)
V64778VSI Rubber Track (For EX60LC-5)
V9156478HD 9156478 Chain, 38L, Sealed & Greased, w/ Master Pin
V9156478HDV Chain, 38L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
Track Hardware
Track Shoes
VKM1685/450 2040402 Shoe, 3 B 450mm
VKM1685/450V 2040402 Shoe, 3 B 450mm (Optional)
VAT183364 2041367 Shoe, 3 B 600mm
Bottom Rollers
VAP34339 9153152 Roller Assembly, S/F
VAP34339V 9153152 Roller Assembly, S/F (Optional)
Carrier Rollers
VAP34340 9153288 Carrier Roller Assembly
VAP34340V 9153288 Carrier Roller Assembly (Optional)
Idlers
VAT183365 9154166 Idler with Bracket
VAT183365V 9154166 Idler with Bracket (Optional)
Sprockets
VAT250565 1024217 Sprocket-Bolt On 12 Bolt hole
VAT250565V Sprocket-Bolt On 12 Bolt hole (Optional)
Page 262
MODEL: Hitachi EX100, ZX110
Diameter OD = 50.6mm & 5/8" Bolt Diameter
Serial Nos: EX100: (41LK) 12-Bottom Roller, 2-Top Rollers
EX100-2: (41LK) 12-Bottom Roller, 2-Top Rollers
Rubber Tracks
V651781 Rubber Tracks
VCR4854/41F Chain 41LK, Unsealed
Your Track Groups
*Note: VPI Pin & Bushing groups will not work with the following OEM link numbers:
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VCR3197HD Spacer
VCR4854/41HD 9143278 Chain, 41L, Sealed & Greased, w/ Master Pin
Your Track Groups
VCR4876/47HD Pin & Bushing Group, 47 LK-Master Pin Type "M" Type Seal
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Page 263
Track Hardware
V7H3597 4253410 Track Shoe Bolt, 5/8"
V1M1408 4253411 Track Shoe Nut, 5/8"
Track Shoes
Bottom Rollers
VHT49 9066508 Roller Assembly, S/F (EX100)
VHT49V 9066508 Roller Assembly S/F (EX100) (Optional)
VAT166891 9132600 Roller Assembly, S/F(EX100-2/3/5, EX100M-2, EX100M-3, EX100M-5, ZX110)
VAT166891V Roller Assembly, S/F(EX100-2/3/5, EX100M-2, EX100M-3, EX100M-5, ZX110) (Optional)
Carrier Rollers
VAT131369V 9105752 Carrier Roller Assembly (EX100)
VAT154514 9092400 Carrier Roller (EX100-2/-3/-5, EX100M-2, EX100M-3, EX100M-5, ZX110)
VAP34654V 9092400 Carrier Roller (EX100-2/-3/-5, EX100M-2, EX100M-3, EX100M-5, ZX110) (Optional)
Idlers
V9068144 9068144 Idler with Bracket (EX100)
VAT180421 9165597 Idler with Bracket (EX100-2, EX100-3, EX100-5, ZX110)
VAT180421V Idler with Bracket (EX100-2, EX100-3, EX100-5, ZX110) (Optional)
V9144654 Track Adjuster Spring Assembly (For EX100-5 Model)
Sprockets
VFT3056 1010325 Sprocket-Bolt On-(21 Teeth)
VFT3056V 1010325 Sprocket-Bolt On-(21 Teeth) (Optional)
Page 264
MODEL: Hitachi EX120, ZX120, ZX135
EX120-3C: (44LK) 14-Bottom Roller, 2-Top Rollers
EX120K-2: (44LK) 14-Bottom Roller, 2-Top Rollers
EX120K-3: (44LK) 14-Bottom Roller, 2-Top Rollers
ZX135US: (44LK) 14-Bottom Rollers, 2-Carrier Rollers
Rubber Tracks
V651841 Rubber Tracks

Your Track Groups
VCR4854F g
Link Segment
VT55263HD Track Pin
VCR3197HD Spacer
Your Track Groups
Page 265
VT55263HD Track Pin
VT55263HD Track Pin
Track Hardware
V1M1408 4253411 Track Shoe Nut, 5/8"
Track Shoes
Bottom Rollers
VHT49 9066508 Roller Assembly, S/F (EX120)
VHT49V 9066508 Roller Assembly S/F (EX120) (Optional)
VAT166891 9132600 Roller Assembly, S/F(EX120-2/-3/-5, ZX120, ZX135)
VAT166891V Roller Assembly, S/F(EX120-2/-3/-5, ZX120, ZX135) (Optional)
Carrier Rollers
VAT131369V 9105752 Carrier Roller Assembly (EX120)
VAT154514 9092400 Carrier Roller Assembly (EX120-2/-3/5, ZX120, ZX135)
VAP34654V 9092400 Carrier Roller Assembly (EX120-2/-3/5, ZX120, ZX135) (Optional)
Idlers
Use OEM 9068144 Idler with Bracket (EX120)
VAT180421 9165598 Idler with Bracket (EX120-2/-3/-5, ZX120, ZX135)
VAT180421V Idler with Bracket (EX120-2/-3/-5, ZX120, ZX135) (Optional)
V9092563 Track Adjuster Spring Assembly (For EX120-2,3 Models)
Sprockets
VFT3056 1010325 Sprocket 21T 16 B/H
VFT3056V 1010325 Sprocket 21T 16 B/H (Optional)
N/A 1028027 Sprocket 21T 16 B/H (15" Hub I.D.) (ZX135 Model - Berco HT572)
Page 266
MODEL: Hitachi EX100M, EX100M-2, EX100M-3, EX150

EX100M: (47LK) 14-Bottom Roller, 4-Top Rollers
EX100M-2: (47LK) 14-Bottom Roller, 4-Top Rollers

VAT159899HD 9096742 Chain, 45L, Sealed and Greased, w/ Master Pin
VAT159899HDV Chain, 45L, Sealed and Greased, w/ Master Pin (Optional)
V9093032 9093032 Chain, 47L, Sealed and Greased, w/ Master Pin
* New Style Chain With Press Fit Master Pin, Please Verify What Chain Customer Has
Based On Master Pin. *
Your Track Groups
VAT126063HD Track Link, L.H.
VAT126062HD Track Link, R.H.
VD7615301N00 Master Pin Complete (Press Fit Style)
VEX150HDV Master Pin Complete ("T" Head Style for V-Track)
VAT159903HD Seal Washer
VAT159902HD Spacer
Components For "Snap Ring" Style Track Chain
VAT170091HD Pin and Bushing Group, 47LK Sealed
VLS590DRYHD Link Segment
VAT126063HD Track Link, L.H.
VAT126062HD Track Link, R.H.
VAT126221HD Sealed Pin
VAT159901HD Master Pin "Snap Ring" Style
VAT126300HD Snap Ring
VAT159903HD Seal Washer
VAT159902HD Spacer
VAT159904HD Sealed Bushing
Track Hardware
V1M1408 4253411 Track Shoe Nut, 5/8"
Track Shoes
VAT126069 Shoe, 3 B 500mm W/Mud Hole
V99J73 Shoe, 3 B 600mm W/Mud Hole
VAT126080 2030537 Shoe, 3 B 700mm W/Mud Hole
Bottom Rollers
VAT127162 9114616 Roller Assembly, S/F
VAT127162V 9114616 Roller Assembly, S/F (Optional)
VAT182985V 9114616 Roller Assembly, S/F (Optional)
Carrier Rollers
VFT2744 9105749 Carrier Roller
VFT2744V 9105749 Carrier Roller (Optional)
Idlers
V9165649V 9069635 Idler with Bracket
V9069753 Track Adjuster Spring Assembly Without Yoke (For EX150 Model Only)
Sprockets
Page 267
VFT3057 1008249 Sprocket-Bolt On
VFT3057V 1008249 Sprocket-Bolt On (Optional)
Use OEM 1007849 Sprocket-Bolt On (EX100M, EX100M-2, EX100M-3)
Page 268
MODEL: Hitachi EX200
Diameter OD = 58.8mm, 18MM" Bolt Diameter
EX200K: (48LK) 14-Bottom Roller, 4-Top Roller
EX200LC: (52LK) 16-Bottom Roller, 4-Top Roller
Sealed Track Chains and Track Groups

VHT17/48 Chain, 48L, Sealed, w/ Master Pin (EX200)
VHT17/52 Chain, 52L, Sealed, w/ Master Pin (EX200)
Your Track Groups
VCR4798/49 Pin & Bushing Group 49Lk Sealed & Greased
VCR4798/52 Pin & Bushing Group 52Lk Sealed & Greased
VHT18 Link, R/H
VHT19 Link, L/H
VCR4795 Track Pin
VCR1605 Master Pin
VCR2166 Seal Washer
VCR5096 Spacer
VCR2163TH Track Bushing
V9066724HD 9066724 Chain, 48L, Sealed and Greased
Chain 48L Greased, w/ Master Pin (200)
VHT17/48HDV 9066724 Chain, 48L, Sealed and Greased, w/ Master Pin (200) (Optional)
V9093376HD 9073376 Chain, 52L, Sealed and Greased, w/ Master Pin (200LC)
VHT17/52HDV 9073376 Chain, 52L, Sealed and Greased, w/ Master Pin (200LC) (Optional)
Your Track Groups
VPBG225DRHD Pin & Bushing Group 48Lk Sealed & Greased
VHT18HD Link, R/H
VHT19HD Link, L/H
V4153370 Track Pin
V7620300N00 Master Pin Complete
V4179765 Master Pin
VCR2166HD Seal
V4152769 Spacer
V4190707 Snap Ring
Track Hardware
Track Shoes
VHT20/600 Shoe, 3 B 600mm
VHT20/700 2022495 Shoe, 3 B 700mm
V99A85 Shoe, 2 B 600mm (With Mud Hole)
VZZ1052A0N700 Shoe, 2 B 700mm (With Mud Hole)
Bottom Rollers
VPC395 9066510 Roller Assembly
Page 269
VPC395V 9066510 Roller Assembly (Optional)
Carrier Rollers
Idlers
VAT172699V 9066393 Idler with Bracket
Sprockets
Page 270
MODEL: Hitachi EX160LC-5, ZX160LC, ZX180
Specs Pitch = 190mm, Link Height = 105mm, Track Bushing
O.D. =60mm & 18mm Bolt Diameter
Serial Nos: EX160LC-5: (43LK) 14-Bottom Rollers, 4-Carrier Rollers
ZX160-LC: (43LK) 14-Bottom Rollers, 4-Carrier Rollers
ZX180: (46LK)

Your Track Groups
Track Hardware
V70598391 Track Shoe Bolt
Track Shoes
VID1701/600 Track Shoe, 1 B 600mm, w/CC Mud Hole
VID1701/700V Track Shoe, 1 B 700mm, w/CC Mud Hole (Optional)
VD1A0053 Track Shoe, 2 B 600mm, w/ Mud Hole
V81854 Track Shoe, 2 B 700mm, w/ Mud Hole
VZV020200N710 Track Shoe, 2 B 710mm, w/o Mud Hole
Bottom Rollers
VHT50 9134243 Roller Assembly S/F
Page 271
VHT50V Roller Assembly S/F (Optional)
VAT166892V Roller Assembly, S/F (Thick Mounting Collar)
Carrier Rollers
VID861 9089636 Carrier Roller
VID861V Carrier Roller (Optional)
Idlers
VAT280859 Idler with Bracket (With S/N: Up- 041910) ITM
VAT214392V Idler with Bracket (With S/N: Up- 041910) (Optional)
Note: The idlers listed above are the same but from different suppliers.
V9176864V 9176864 Idler with brackets (For ZX160LC, ZX180 Models Only)
Sprockets
VAT218227 1020990 Sprocket (21T - 16 Bolt Hole)
VAT218227V Sprocket (21T - 16 Bolt Hole) (Optional)
Page 272
MODEL: Hitachi EX100M-5, EX150LC-5, EX200-2,3,5,
EX200LC-2,3,5, ZX200, ZX200LC
EX150LC-5: (43LK) 14-Bottom Rollers, 4-Top Rollers
EX200-2, 200K-2: (46LK) 14-Bottom Roller, 4-Top Roller
ZX200LC: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
Contact VPI Representitive for parts availability For Older Style Chains
New Style Unsealed Track Chains and Track Groups

VKM1170/46F Chain, 46L, Unsealed, w/ Master Pin (200-2, 200-3, 200-5)
VKM1170/49F Chain, 49L, Unsealed, w/ Master Pin (200LC-2, 200LC-3, 200LC-5)
Your Track Groups
V031265 Spacer
Hitachi Style Sealed & Greased Chains
Note: Hitachi Style Chains With Snap Ring Master Pin & Dish Seal
V9135631HD Chain, 46LK, Sealed & Greased, w/ Snap Ring "Hitachi" Master Pin
V9176007HD Chain, 49LK, Sealed & Greased, w/ Snap Ring "Hitachi" Master Pin
* New Style Chain Casting Number D7622, Verify Casting Number for Parts. *
Your Track Groups
VD7622400N47 Pin & Bushing Group 47LK Sealed & Greased W/Snap Ring Master Pin
VAT170092 Pin & Bushing Group 51LK Sealed & Greased W/Snap Ring Master Pin
VLSEX200HD Link Segment
V1021382 Link, R/H
V1021383 Link, L/H
VAT213899 Master Link (Right hand side. This side has groove for snap ring)
V4358587 Track Pin
Page 273
V4358591 Master Pin
V4358589 Seal
V4358592 Spacer
VAT174863 Snap Ring
New Style Sealed & Greased Chains and Track Groups
VKM1170/42HD 9180315 Chain, 42L, Sealed and Greased, w/ Master Pin (EX100M-5)
VKM1170/43HD 9180317 Chain, 43L, Sealed and Greased, w/ Master Pin (EX150LC-5)
VKM1170/43HDV 9180317 Chain, 43L, Sealed and Greased, w/ Master Pin (EX150LC-5) (Optional)
VKM1170/46HD 9200210 Chain, 46L, Sealed and Greased, w/ Master Pin
VKM1170/46HDV 9200210 Chain, 46L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VHT50 9184516 Roller Assembly,
VHT50V 9184516 Roller Assembly (Optional)
Carrier Rollers
Page 274
VID861V 9134245 Carrier Roller (Optional)
Idlers
VAT172699V 9066393 Idler with Bracket (EX200-2, EX200LC-2, EX200-3, EX200LC-3, EX200H)
VAT280859 9145269 Idler with Bracket (EX150-5, EX200-5, EX200LC-5) ITM Brand
VAT214392V 9145269 Idler with Bracket (EX150-5, EX200-5, EX200LC-5) (Optional)
Note: The two (2) idlers listed above are the same but from different suppliers.
V9176864V 9176864 Idler With Brackets For (ZX200 Model Only)
V9090028 Track Adjuster Spring Assembly (For EX200-2, EX200-3 Model)
V9186437 9186437 Track Adjuster Spring Assembly (For ZX200 Model)
Sprockets
VFT3059 1010203 Sprocket-Bolt On (21T - 16 Bolt Hole - 431mm ID) (EX200-2, EX200LC-2)
VFT3059V 1010203 Sprocket-Bolt On (21T - 16 Bolt Hole - 431mm ID) (Optional)
VAT218227 1018740 Sprocket-Bolt On (21T - 16 Bolt Hole - 420mm ID) (EX150LC-5, EX200-3/5, EX200LC-3/5)
** SEE NOTE BELOW **
VAT218227V 1018740 Sprocket-Bolt On (21T - 16 Bolt Hole - 420mm ID) (Optional)
NOTE: When supplying sprockets for EX200-5 & EX200LC-5 - MUST Confirm sprocket I.D.
and final drive group number. For Final Drive Group HMGF 35BA, I.D. = 420mm or 16.5"
Use: VAT218227. For Final Drive Group HMGF 38AA, I.D. = 431 mm or 17" Use: FT3059 *.
You can also count the number of bolts on the final drive cover. FT3059 is a 16-Bolt Final
Drive, AT218227 is a 12-Bolt Final Drive.
Page 275
Note: Verify Link Casting Number And Seal Type Before Ordering Track
Contact Your VPI Representitive For Availability OF Older Style Chains
Note: Verify Track Bolt Size Before Ordering Chains
New Style Unsealed 18mm Bolt Hole Chains and Track

Groups
VKM1170/47F Chain, 47L, Unsealed, w/ Master Pin (EX220))
VKM1170/51F Chain, 51L, Unsealed, w/ Master Pin (EX220LC)
Your Track Groups
VKM68HD Sealed
S Bushing
V031265 Spacer
New Style Sealed & Greased 18mm Bolt Hole Chains and
Track Groups
VKM1170/47HD 9066727 Chain, 47L, Sealed and Greased, w/ Master Pin (EX220)
VKM1170/47HDV 9066727 Chain, 47L, Sealed and Greased, w/ Master Pin (EX220) (Optional)
VKM1170/51HD 9073253 Chain, 51L, Sealed and Greased, w/ Master Pin (EX220LC)
VKM1170/51HDV 9073253 Chain, 51L, Sealed and Greased, w/ Master Pin (EX220LC) (Optional)
Your Track Groups
VKM54HD Track Link, R.H..
Page 276
Track Hardware
V70598391 4247132 Track Shoe Bolt, 18MM
V74982325 4247133 Track Shoe Nut, 18MM
Track Shoes
New Style Unsealed Track Chain 20mm Bolt Hole
VKM782/47F Chain, 47L, Unsealed, w/ Master Pin (EX220))
VKM782/47FV Chain, 47L, Unsealed, w/ Master Pin (EX220) (Optional)
VKM782/51FV Chain, 51L, Unsealed, w/ Master Pin (EX220LC) (Optional)
Your Track Groups
V031265 Spacer
Hitachi Style Sealed & Greased Chains and Track Groups
20mm Bolt Hole
V9180319HD Chain, 47L, Sealed & Greased, w/ Snap Ring "Hitachi" Master Pin
Your Track Groups
V1022092 Link, R/H
V1022093 Link, L/H
Page 277
VAT174859 Master Link
V4358587 Track Pin
V4358591 Master Pin
V4358589 Seal
V4358592 Spacer
VAT174863 Snap Ring
Sealed & Greased Track Chains and Track Groups 20mm Bolt
Hole
VKM782/47HD 9066727 Chain, 47L, Sealed and Greased, w/ Master Pin (EX220))
VKM782/47HDV 9066727 Chain, 47L, Sealed and Greased, w/ Master Pin (EX220) (Optional)
VKM782/51HD 9073253 Chain, 51L, Sealed and Greased, w/ Master Pin (EX220LC)
VKM782/51HDV 9073253 Chain, 51L, Sealed and Greased, w/ Master Pin (EX220LC) (Optional)
Your Track Groups
VKM68HD Sealed
S l dB Bushing
hi
Track Hardware 20mm
V79035814 Track Bolt, 20mm X 60mm (NON-OEM Track Shoe - Base Plate Thickness = 9-10mm)
V20Y.32.11210 4255637 Track Bolt, 20mm X 53mm (OEM Track Shoe - Base Plate Thickness = 7-8mm)
Page 278
Bottom Rollers
VHT47 9066509 Roller Assembly
VHT47V 9066509 Roller Assembly (Optional)
Carrier Rollers
Idlers
Sprockets
Page 279
MODEL: Hitachi EX220-2, EX220-3, EX220-5, EX230H-5,
EX230K-5, EX230LC-5, ZX225LC, ZX230LC,
ZX240LC, ZX240LC-3, ZX200LC-3
Serial Nos: EX220-2: (47LK) 16-Bottom Roller, 4-Top Roller
EX220-3: (47LK) 16-Bottom Rollers, 4-Carrier Rollers
EX230H-5: (47LK) 16-Bottom Roller, 4-Top Roller
EX230K-5: (47LK)
EX220LC-3: (51LK) 18-Bottom Rollers, 4-Carrier Rollers
EX230LC-5: (51 LK) 18-Bottom Roller, 4-Top Roller
ZX240LC: (51LK) 18-Bottom Roller, 4 Carrier Rollers
ZX240LC-3: (51LK) 18-Bottom Roller, 4 Carrier Rollers (JD240DLC)
ZX200LC-3: (49LK) 16-Bottom Rollers, 4-Carrier Rollers (JD200DLC)
Contact Your VPI Representitive For Availability Of Older Style Chains

New
N Style
St l UUnsealed
l d Track
T k Chain
Ch i
VKM782/47F 9093029 Chain, 47L, Unsealed, w/ Master Pin (EX220)
VKM782/47FV 9093029 Chain, 47L, Unsealed, w/ Master Pin (EX220) (Optional)
Your Track Groups
V031265 Spacer
Page 280
Hitachi Style Sealed & Greased Chains and Track Groups
Your Track Groups
V1022092 Link, R/H
V1022093 Link, L/H
V4358587 Track Pin
V4358591 Master Pin
V4358589 Seal
V4358592 Spacer
VAT174863 Snap Ring
VKM782/49HD Chain, 49L, Sealed and Greased, w/ Master Pin (ZX225LC)
VKM782/49HDV Chain, 49L, Sealed and Greased, w/ Master Pin (ZX225LC) (Optional)
Your Track Groups
Track Hardware
Track Shoes
Page 281
Bottom Rollers
VHT50 9134243 Roller Assembly
VHT50V Roller Assembly (Optional)
VAT166892V Roller Assembly (Thick Mounting Collar)
Carrier Rollers
V9234984V 9234984 Carrier Roller (ZX200LC-3 & ZX240LC-3 ONLY)
Idlers
VAT172699V 9143400 Idler with Bracket: Early Model (EX220-2, & EX220-3 With Serial Number Prior to 10767)
VAT280859 9145269 Idler with Bracket: Late Model (EX220-3 S/N 10767- Up, EX220-5, EX230LC-5) ITM
VAT214392V Idler with Bracket: Late Model (EX220-3 S/N 10767- Up, EX220-5, EX230LC-5) (Optional)
Note: The two (2) idlers listed above are the same but from different suppliers.
V9176864V 9176864 Idler With Brackets For (ZX225LC, ZX230LC, ZX200LC-3 & ZX240LC-3 Models Only)
V9188175 9188175 Track Adjuster Spring Assembly (For ZX230 Model)
Sprockets
VFT3059 1010203 Sprocket 21T - 16 B/H
VFT3059V 1010203 Sprocket 21T - 16 B/H (Optional)
V1033091V 1033091 Sprocket 21T - 18 B/H (ZX200LC-3 ONLY)
V1032489V 1032489 Sprocket 21T - 20 B/H (ZX240LC-3 ONLY)
Page 282
MODEL: Hitachi EX270, EX270-2, EX270-3, EX270-5,
EX270LC, EX270LC-2, EX270LC-3, EX270LC-5,
EX300, EX300-2, EX300-3, EX300LC,
EX300LC-2, EX300LC-3
EX300: (47LK) 16-Bottom Rollers, 4-Carrier Rollers
EX300LC: (50LK) 18-Bottom Rollers, 4-Carrier Rollers
Unsealed Track Chains

VKM959/47FV Chain,, 47L,, Unsealed,, w/ Master Pin (Optional)
( p )
Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
V992658HD 9115182 Chain, 50L, Sealed and Greased, w/ Master Pin
Your Track Groups
VKM1406/47HD Pin & Bushing Group 47LK Sealed & Greased
Page 283
VKM1033HD Link, R/H
VKM1034HD Link, L/H
VKM1365HD Track Pin
VCR1630HDM Seal Polyurethane "M" Style
VCR1632HD Spacer
VTH111227 Cotter Pin
VKM170HD Track Bushing
Track Hardware
Track Shoes
VKM971/900 Track
T k Shoe,
Sh 3 B 900mm
900
Bottom Rollers
VAT201169 9114619 Roller - EX270-2/3/5, EX270LC-2/3/5, EX300-2/3/, EX300LC-2/3
VAT250257V Roller - (Optional for Above) - EX270-2/3/5, EX270LC-2/3/5, EX300-2/3/, EX300LC-2/3
VTH111594V Roller Assembly - EX270, EX270LC, EX300, EX300LC (Early Machine)
Carrier Rollers
VAT250248V 9149839 Carrier Roller (120mm Tread Dia) NOTE: Will Require Spacer if used w/ Early Models)
VFT2784 9062405 Carrier Roller (150mm Tread Diameter - Early EX270, LC, EX300, LC Models)
VFT2784V Carrier Roller (Optional) (150mm Tread Diameter - Early EX270, LC, EX300, LC Models)
Idlers
V9097317 Track Adjuster Spring Assembly (For EX270-2/3, EX270LC-2/3 - EX300-2/3, EX270LC-2/3)
Sprockets
VFT3060 1010467 Sprocket-Bolt On 16-Bolt Hole (EX270LC, EX270LC-2, EX300LC, EX300LC-2)
VFT3060V Sprocket-Bolt On (Optional)
VAT202586 1017928 Sprocket-Bolt On 20-Bolt Hole (EX270LC-3, EX270LC-5, EX300LC-3)
VAT202586V Sprocket-Bolt On (Optional)
Page 284
MODEL: Hitachi EX300-5, EX300LC-5, EX330-5, EX330LC-
5, ZX270LC, ZX270LC-3, ZX330LC, ZX350LC-3,
ZX370
Specs Pitch= 8.50", Link Height 116.mm, Bushing O.D.=
67.5mm, Bolt Dia.= 22mm
***Note: Verify Pitch, Link Height, Link Spread,
Bushing Diameter, and Bolt Hole before ordering.
Serial Nos: For this model*
EX330-5: (45LK) 16-Bottom Rollers, 4-Carrier Rollers (JD330)
EX330LC-5: (48LK) 18-Bottom Roller, 4-Top Roller (JD330LC)
ZX270LC: (48LK) 16-Bottom Rollers, 4-Carrier Rollers (JD270CLC)
ZX370: (48LK) 18-Bottom Roller, 4-Carrier Rollers
ZX350LC-3: (48LK) 18-Bottom Roller, 4-Carrier Rollers (JD350DLC)
ZX270LC-3 & ZX350LC-3 models CANNOT be converted to VHT227 Rails
- Bottom roller is too narrow to accept larger chain.
8.50" Pitch Sealed & Greased Chains w/ 22mm Bolt

VKM2233/45HDV 9156481 Chain, 45L, Sealed and Greased
Your Track Groups
ValuePart Components are NOT compatible with OEM chains.
VKM2329/48HD Pin & Bushing Group 48Lk Sealed With "M" Type Seal
VKM1365 Track Pin
VKM2330HD Master Pin Group (1.75" X 9.5")
VKM1366 Master Pin
VCR1630HDM Seal Assembly "M" Type
VCR1632HDM Master Seal For Master Pin
VKM1905HD Bushing
Your Track Groups
VKM2329/48F Pin & Bushing Group 48Lk Unsealed
VKM1365 Track Pin
VKM2330F Master Pin Group Unsealed
VKM1366 Master Pin
Page 285
VKM170F Bushing Unsealed
V3081343 AT219650 Track Bolt M22 x 59mm x 1.5mm
V76007851 Track Bolt M22 x 70mm x 1.5mm (Use With 2-Bar Shoe SJ.0162/0700)
V79035320 AT219651 Track Nut M22 x 1.5mm
VSJ.0162/0700 Track Shoe, 2 B 700mm, w/ Mud Hole
VKM2118/600 2040403 Track Shoe, 3 B 600mm
VKM2118/600V 2040403 Track Shoe, 3 B 600mm (Optional)
Bottom Rollers
VAT201169 9168173 Roller Assembly
VAT250257V 9168173 Roller Assembly (Optional) **NOTE old part number VAT201169V
V6V9667 Roller Mounting Bolt - M20 x 100mm
V9247454V 9253782 Roller Assembly - (FITS ONLY: ZX270LC-3, ZX350LC-3)
N/A Roller Mounting Bolt - M22 x 110mm
Carrier Rollers
VAT250248V 9191054 Carrier Roller
V9245117V 9245117 Carrier Roller - (FITS ONLY: ZX270LC-3, ZX350LC-3)
Idlers
V6V4429 Idler Mounting Bolt - M16 x 40
V9159015 Track Adjuster Spring Assembly (For AT250450V Idlers)
Sprockets
V1022168V 1022168 Sprocket-Bolt
S k B l O On, 21-Tooth,
21 T h 20 20-Bolt
B l HHole (ZX270LC,
l (ZX2 ZX280LC, EX330
0LC ZX280LC EX330, ZX330 M
Models)
d l )
V6V3532 Sprocket Mounting Bolt - M20 x 60mm
V1033227V 1033227 Sprocket 21T - 24 B/H (FITS ONLY ZX270LC-3)
V1033163V 1033163 Sprocket 21T - 22 B/H (FITS ONLY ZX350LC-3)
*OEM Factory Option Only*
Super Heavy Duty Optional Chains and Track Groups 24mm
Bolt Hole
This Super Heavy Duty Option Is a Factory Option and May Not Be Fitted To A Machine
That Has Standard Undercarriage Currently. Verify Link Casting Numbers Before Ordering.
VHT227/49HD 9133225 Chain, 49L, Sealed and Greased w/Master Pin **CHECK NUMBER OF LINKS**
VHT227/49HDV 9133225 Chain, 49L, Sealed and Greased w/Master Pin (Optional) **CHECK NUMBER OF LINKS**

Your Track Groups
VAT170096 Pin and Bushing Group, 53LK
VAT201778 Track Link, L.H..
VAT201777 Track Link, R.H..
VCR1540HD Spacer
VKM804HDM Master Seal (For Master Pin On New Style Chains)
Page 286
*Note: Verify Track Chain before ordering SHOES*
Bottom Rollers
*Note: Verify Track Chain before ordering Rollers*
VLH90 9129347 Roller Assembly Heavy Duty for 9133225 chains
VLH90V Roller Assembly Heavy Duty for 9133225 chains (Optional)
Carrier Rollers
*Note: Verify Track Chain before ordering Carrier Rollers*
VAT201927 9099140 Carrier Roller, Heavy Duty for 9133225 chain
VAT201927V Carrier Roller, Heavy Duty for 9133225 chain (Optional)
Idlers
*Note: Verify Track Chain before ordering Idlers*
VAT201944V 9134295 Idler with Bracket Heavy Duty for 9133225 chains
Sprockets
*Note: Verify Track Chain before ordering Sprockets*
VFT3061 1010956 Sprocket-Bolt-On Heavy Duty for 9133225 chain
Page 287
MODEL: Hitachi EX400, EX400LC

VKM973/49HD Chain, 49L, Sealed and Greased, w/ Master Pin (EX400)
VKM973/53HD Chain, 53L, Sealed and Greased, w/ Master Pin (EX400LC)
Note: When replacing track groups use EX400-3 TRACK CHAIN AND SHOES
Your Track Groups
Track Link, L.H..
Track Link, R.H..
VKM1398 Sealed Pin
VKM313 Master Pin
Master Bushing
VCR1541 Seal Washer
VKM316 Spacer
Sealed & Greased Chain "M" TYPE SEAL
VKM973/49HDM 4332004 Chain, 49L, Sealed and Greased, w/ Master Pin (EX400)
VKM973/52HDM Chain, 52L, Sealed and Greased, w/ Master Pin (EX400LC)
VKM973/53HDM 4317445 Chain, 53L, Sealed and Greased, w /Master Pin (EX400LC)
Note: When replacing track groups use EX400-3 TRACK CHAIN AND SHOES
VKM973HDM Link Segment
VCR1541HDM Seal Assembly 'M' Type
Track Hardware
V76007851 4229948 Track Shoe Bolt, 22MM
V79035320 4198449 Track Shoe Nut, 22MM
Track Shoes
Bottom Rollers
VLH90 9114275 Roller Assembly
VLH90V 9114275 Roller Assembly (Optional)
Carrier Rollers
Idlers
Page 288
V9123422 Track Adjuster Spring Assembly
Sprockets
Page 289
MODEL: Hitachi EX370, EX370LC-5, ZX370LC, EX400-3,
EX400LC-3, EX450LC, ZX450LC, ZX450LC-3
Serial Nos: EX370/EX370LC-5: (49LK) 16-Bottom Roller, 4-Top Roller
ZX370LC: (49LK) 16-Bottom Roller, 4-Top Roller
EX400LC-3: (53LK) 20-Bottom Roller, 6-Top Rollers
EX400HLC-3: (53LK) 20-Bottom Roller, 6-Carrier Rollers
EX400HLC-5: (53LK) 20-Bottom Rollers, 6-Carrier Rollers

Your Track Groups
VKM1104/49 Pin & Bushing Group 49Lk Sealed
VKM1398 Sealed Pin
VKM1411 Master Pin Group Complete
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
VHT227/49HD 9133225 Chain, 49L, Sealed and Greased, w/ Master Pin
VHT227/49HDV 9133225 Chain, 49L, Sealed and Greased, w/ Master Pin (Optional)
VHT227/53HD 9129617 Chain, 53L, Sealed and Greased, w/ Master Pin
VHT227/53HDV 9129617 Chain, 53L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
VCR1540HD Spacer
Page 290
Track Hardware
Track Shoes
Bottom Rollers
VLH90V 9114275 Roller Assembly (Optional)
Carrier Rollers
VAT201927 9099140 Carrier Roller
VAT201927V 9099140 Carrier Roller (Optional)
Idlers
V9244297V 9244297 Idler with Bracket (Fits Only ZX450LC-3)
V9099143 9141014 Track Adjuster Spring Assembly (For EX400-3, 5 Models Only)
V9155799 9155799 Track Adjuster Spring Assembly (For EX450, EX450LC-5, ZX450 Models Only)
Sprockets
Page 291
MODEL: Hitachi ZX500LC, EX550, EX600H
Specs 228.6 mm Pitch, Link Height =133mm, Bushing
Diameter OD = 79mm & 24mm Bolt Diameter
Serial Nos: ZX500LC: (49LK) 16-Bottom Rollers, 6-Carrier Rollers
EX550: (49 LK) 16-Bottom Rollers, 6-Top Rollers
EX550H: (49LK) 16-Bottom Rollers, 6-Carrier Rollers
EX550LC: (52LK) 18-Bottom Rollers, 6-Top Rollers
EX550LCH: (52LK) 18-Bottom Rollers, 6-Carrier Rollers
EX600LCH: (52LK) 18-Bottom Rollers, 6-Carrier Rollers
EX600H-3: (49LK) 16-Bottom Rollers, 6-Carrier Rollers
EX600LCH-3: (52LK) 18-Bottom Rollers, 6-Carrier Rollers
EX600LCH-5: (52LK) 18-Bottom Rollers, 6-Carrier Rollers

V9137493 Track Group, 49L, Sealed & Greased, w/ Master Pin, w/ 3 B 600mm Shoe
Your Track Groups
V4295788 Track Link R/H
V4295789 Track Link L/H
V4326065 Track Pin
D7655300N00 Master Pin Complete
Track Hardware
V4295784 4295784 Track Shoe Bolt 24MM X 81MM
V4295785 4295785 Track Shoe Nut, 24MM Special
Track Shoes
V4295783 4295783 Shoe, 3 B 600mm
V4295787 4295787 Shoe, 3 B 750mm
V4352992 4352992 Shoe, 3 B 900mm
Bottom Rollers
V4348373 9109493 Roller Assembly, S/F
V4348373V 9109493 Roller Assembly, S/F (Optional)
Carrier Rollers
V4349517 9109492 Carrier Roller Assembly
V4349517V 9109492 Carrier Roller Assembly (Optional)
Idlers
V9137270V 9137270 Idler with Bracket (Optional)
Page 292
Sprockets
V1020265 1020265 Sprocket
V1020265V Sprocket (Optional)
Page 293
Diameter OD = 85.3mm & 27mm Bolt Diameter
Serial Nos: EX700: (47LK) 16- Bottom Rollers, 6-Top Rollers
EX700BE: (47LK) 16-Bottom Rollers, 6-Carrier Rollers
Sealed Chain
VKM596/47 9078986 Chain, 47L, Sealed, w/ Master Pin
Sealed & Greased Chain and Track Groups
Your Track Groups
V4345170 Track Pin
V4051870 Cotter Pin
Track Hardware
Track Shoes
Use OEM 4218739 Shoe, 2 B 650mm
Bottom Rollers
VLH178 Roller Assembly, S/F ** For S/N Up To 1427 ** Do not mix with OEM rollers
V4473720 4473720 Roller Assembly, S/F **For S/N 1427-Up**
**Note: May need 4403030 plate when changing to new style roller on EX700 machines**
V4473720V 4473720 Roller Assembly, S/F **For S/N 1427-Up** (Optional)
Carrier Rollers
Idlers
V9126760 9188628 Idler with Bracket
Sprockets
V1017812V 1017812 Sprocket 23T - 24 B/H (Hub I.D. is 688mm)
Page 294
MODEL: Hitachi EX750-5, ZX800, ZX850-3
Serial Nos: EX750-5: (51LK) 18-Bottom Rollers, 6-Carrier Rollers
ZX850-3: (51LK) 18-Bottom Rollers, 6-Carrier Rollers
Sealed Chain
Your Track Groups
V4345170 Track Pin
VD7670300N00 Headed Master Pin Complete
V4345173 Seal Assembly, Polyeurthane
V4051870 Cotter Pin
Track Shoes
Use OEM 4218739 Track Shoe, 650mm 2 B With Mud Hole
VKM976/700 4218844 Track Shoe, 750mm 2 B With Mud Hole
VKM976/900 4252719 Track Shoe, 900mm 2 B With Mud Hole
VKM976/1010 Track Shoe, 1010mm 2 B With Mud Hole
Track Hardware
Bottom Rollers
V4473720 4350792 Roller Assembly, S/F **For S/N 1427-Up**
V4473720V 4350792 Roller Assembly, S/F **For S/N 1427-Up** (Optional)
Carrier Rollers
N/A 4638433 Carrier Roller (Fits Only ZX850-3 Model)
Idlers
V9126760 9134272 Idler (For EX750-5 Model)
V9134272V 9134272 Idler (For EX750-5 Model) (Optional)
V4479885 4479885 Idler Group (ZX800 Model)
N/A 4658418 Idler Group (ZX850-3 Model)
Sprockets
V1017812V 1017812 Sprocket 23T - 24 B/H (Hub I.D. is 688mm) (Model EX750-5)
V4430291V 4430291 Sprocket 23T - 24 B/H (Hub I.D. is 668mm) (Models ZX800 & ZX850)
Page 295
Serial Nos: EX1000: (49LK) 16-Bottom Rollers

Your Track Groups
VKM596 Link Segment
VKM429 Track Link, L/H
VKM430 Track Link, R/H
VKM431 Track Pin
VKM432 Master Pin
Track Hardware
Track Shoes
Bottom Rollers
VLH178 Roller Assembly, S/F
Page 296
Serial Nos: EX1100: (52LK) 16-Bottom Rollers, 6-Top Rollers
EX1100-3: (52LK) 16-Bottom Rollers, 6-Top Rollers
EX1100BE: (52LK) 16-Bottom Rollers, 6-Top Rollers

Your Track Groups
V9127744 Master Link, R/H
V9128170 Master Link, L/H
V4312641 Track Pin
V4306647 Master Pin
V4132763 Spacer
V4051870 Cotter Pin
Track Hardware
V4314542 4314542 Track Shoe Bolt, 30mm x 100mm
4295409 Track Shoe Bolt
Bolt, 30mm x 130mm (OEM ONLY)
Track Shoes
Bottom Rollers
V9097436 Roller Assembly, S/F
V9097436V Roller Assembly, S/F (Optional)
Carrier Rollers
V4349518 Carrier Roller Assembly
V4349518V Carrier Roller Assembly (Optional)
Idlers
V9101204 Idler with Bracket
V9101204V Idler with Bracket (Optional)
Sprockets
V1013481V 1013481 Sprocket
Page 297
MODEL: Hitachi EX1200-5
Serial Nos: EX1200-5:(52 LK) 16 Bottom Rollers, 6 Top Rollers

Your Track Groups
V9127744 Master Link, R/H
V9128170 Master Link, L/H
V4312641 Track Pin
V4306647 Master Pin
V4132763 Spacer
V051870 Cotter Pin
Track Hardware
Track Shoes
Use OEM 4278310 Shoe,
Shoe 2 B 710mm
Bottom Rollers
V9097436V Roller Assembly, S/F (Optional)
Carrier Rollers
V4349518V Carrier Roller Assembly (Optional)
Idlers
V9101204 Idler with Bracket
V9101204V Idler with Bracket (Optional)
Sprockets
V1013481V 4445136 Sprocket
Page 298
Serial Nos: EX1800: (49LK) 16-Bottom Rollers, 6-Top Rollers

V4334483 Chain, 49L, Unsealed, w/ Master Pin
Your Track Groups
V4184421 Track Pin
Track Hardware
V3034713 3034713 Washer
Track Shoes
Use OEM
Bottom Rollers
Carrier Rollers
Idlers
Use OEM 9064302 Idler with Bracket
Sprockets
V1009635V 1024410 Sprocket
Page 299
MODEL: Hyundai R130LC
Specs Pitch=6.75", Link Ht = 93mm, Bushing O.D. = 50.8mm,
Bolt Diameter= 9/16"
Serial Nos: R130LC:(46LK) 14-Bottom Rollers, 2-Carrier Rollers

VCR1766/46 83E6-2501 Chain, 46L, Unsealed, w/ Master Pin
Your Track Groups
VCR4876/47 Pin & Bushing Group 37L Unsealed
VCR1732 Link L.H.
VCR1733 Link R.H.
VCR3196 Track Pin
VCR241 Bushing
VCR4873 Master Pin
Track Hardware
V7K2017 Track Shoe Nut
Track Shoes
VCR3226/20 Shoe, 3 B 500mm With Mud Hole
Bottom Rollers
VPC377 81E6-17020 Roller Assembly (14-Required)
VPC377V Roller Assembly (14-Required) (Optional)
Carrier Rollers
VCR2880 83E6-2003 Carrier Rollers (2-Required)
Idlers
V81E6-2004 81E6-2004 Idlers With Brackets
Sprockets
V81E6-2001V 81E6-2001 Sprockets
Page 300
MODEL: Hyundai R130LC-3
Bolt Diameter= 5/8"
Serial Nos: R130LC-3:(46LK) 14-Bottom Rollers, 2-Carrier Rollers

VCR4858/46F Chain 46L, Unsealed, W/ Master Pin
Your Track Groups
VCR3196 Sealed Pin
VCR3194 Master Pin
VCR3197F Spacer
VCR4858/46 81E6-26050 Chain, 46L, Sealed, w/ Master Pin
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 Spacer
Track Shoes
Track Hardware
Bottom Rollers
Page 301
VPC377 81E6-17020 Roller Assembly (14-Required)
VPC377V Roller Assembly (14-Required) (Optional)
Carrier Rollers
VCR2880 83E6-2003 Carrier Rollers (2-Required)
Idlers
V81E6-2004 Idlers With Brackets
Sprockets
V81E6-2001V 81E6-2001 Sprockets
Page 302
MODEL: Hyundai R160LC-3, R180LC, R200, R200LC,
R210LC
53.97mm, Bolt Diameter= 5/8"
Serial Nos: R160LC-3: (49LK) 14-Bottom Rollers, 4-Carrier Rollers
R180LC: (51LK) 14-Bottom Rollers, 2-Carrier Rollers
R200: (50LK) 18-Bottom Rollers,
R200LC, R210LC: (54LK)

VCR2006/50 81EL-20010 Chain, 50L, Unsealed, w/ Master Pin
VCR2006/50V 81EL-20010 Chain, 50L, Unsealed, w/ Master Pin (Optional)
VCR2006/54 83E1-2502-10 Chain, 54L, Unsealed, w/ Master Pin
VCR2006/54V 83E1-2502-10 Chain, 54L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
VCR3204/40 Pin and Bushing group, 40 LK Unsealed with Master Pin (CR2006/xx Chains)
VCR3533 Master Pin Complete (For CR2006/xx Chains)
VCR255 Sealed Pin
VCR256TH Unsealed Bushing (For CR2006/xx Chains)
VCR1605 Master Pin
VPC57 Spacer (For CR2006/xx Chains)
Your Track Groups
VCR2625/40 Pin and Bushing group, 40 LK Sealed with Master Pin (For CR1998/xx Chains)
VCR2625/45 Pin and Bushing group, 45 LK Sealed with Master Pin (For CR1998/xx Chains)
VCR1608 Master Pin Complete (For CR1998/xx Chains)
VCR255 Sealed Pin
VCR1604 Sealed Bushing (For CR1998/xx Chains)
VCR1605 Master Pin
VCR1607 Spacer (For CR1998/xx Chains)
Track Hardware
Track Shoes
VCR3229/20 Shoe, 3 B 500mm
VCR3229/22 Shoe, 3 B 560mm
VCR3229/24 Shoe, 3 B 600mm
VCR3229/28 Shoe, 3 B 700mm
Page 303
VCR3229/30 Shoe, 3 B 750mm
VCR3229/36 Shoe, 3 B 900mm
Bottom Rollers
VKM1428 81EL-20020 Roller Assembly (14-Required) For models R160LC and R180LC only
VKM1428V Roller Assembly (14-Required) For models R160LC and R180LC only (Optional)
VP2242345G E181-2002 Roller Assembly (For R200, R200LC S/N: Up To 4159 & 210LC Models)
VPC431 Roller Assembly (For R200, R200LC S/N: 4160-Up)
VPC431V Roller Assembly (For R200, R200LC S/N: 4160-Up) (Optional)
Carrier Rollers
VKM1640 81EM-10030-01 Carrier Rollers (For R160LC-3, R180LC Models)
VKM1640V Carrier Rollers (Optional) (For R160LC-3, R180LC Models)
Idlers
VKM1642 81EM-14010-20 Idler With Brackets (For Models R160LC and R180LC only)
VKM1642V Idler With Brackets (For Models R160LC and R180LC only) (Optional)
V20Y.30.29100 81EL-20070 Track Adjuster Spring Assembly (R180LC Model Only)
VP1942384M E181-2004 Idler With Brackets (For Model R200, R200LC, R210LC Only)
Sprockets
VE181-2001V E181-2001 Sprocket (For R200, R200LC, R210LC Model Only)
Page 304
MODEL: Hyundai R200-3, R200LC-3, R210-3, R210LC-3,
R250LC-3, R250NLC-3
Serial Nos: R200-3:(50LK) 18-Bottom Rollers, 4-Carrier Rollers
R200LC-3:(54LK) 18-Bottom Rollers, 4-Carrier Rollers
R210-3:(45LK) 14-Bottom Rollers, 4-Carrier Rollers
R210LC-3:(49LK) 18-Bottom Rollers, 4-Carrier Rollers
R210LC-3 Highwalker: (49LK) 18-Bottom Rollers, 4- Bottom Rollers as tops
R250LC-3, R250NLC-3:(51LK) 20-Bottom Rollers, 4-Carrier Rollers

VKM782/49F 81EM-27010 Chain, 49L, Unsealed, w/ Master Pin
VKM782/49FV 81EM-27010 Chain, 49L, Unsealed, w/ Master Pin (Optional)
VKM782/51F 81EN-20010 Chain, 51L, Unsealed, w/ Master Pin
VKM782/51FV 81EN-20010
81EN 20010 Chain, 51L, Unsealed
Chain 51L Unsealed, w/ Master Pin (Optional)
VKM782/54F 81EM-20010 Chain, 54L, Unsealed, w/ Master Pin
VKM782/54FV 81EM-20010 Chain, 54L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
V031265 Spacer
VKM782/45HD Chain, 41LK, Sealed & Greased, w/ Master Pin

VKM782/45HDV Chain, 41LK, Sealed & Greased, w/ Master Pin (Optional)
Page 305
Your Track Groups
Track Shoes (20 mm Bolt Hole)
Track Hardware
Bottom Rollers
VKM1428 81EL-20020 Roller Assembly
VKM1428V Roller Assembly (Optional)
Page 306
VP2242345G E181-2002 Roller Assembly - Highwalker (22 total required - 18 on bottom 4 as tops)
Carrier Rollers
VKM1640 81EM-10030-01 Carrier Rollers
VKM1640V Carrier Rollers (Optional)
Idlers
VKM1642 81EM-14010-20 Idler With Brackets
VKM1642V Idler With Brackets (Optional)
V20Y.30.29100 81EL-20070 Track Adjuster Spring Assembly
Sprockets
V81EM-10010V 81EM-10010 Sprocket (For R200-3, R200LC-3, R210LC-3, R250LC-3 S/N: Up - 465 Models)
V81EN-10010V 81EN-10010 Sprocket (FOR R240LC-III Model)
Page 307
MODEL: Hyundai R280, R280LC, R290, R290-III, V,
R290LC-III, V, R320LC
Specs Pitch=8", Link Ht = 121.5mm, Bushing O.D. = 66.8mm,
Bolt Diameter= 20mm
Serial Nos: R280: (47LK) 16-Bottom Rollers, 4-Carrier Rollers
R290: (48LK) 16-Bottom Rollers, 4-Carrier Rollers
R290LC:
R320LC:

Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM959/47 Use KM959/47F or KM959/47HD
VKM959/51 81E9-27010 Use KM959/51F or KM959/51HD
Your Track Groups
VKM1365 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VKM959/47HD Chain, 47LK, Sealed and Greased, w/ Master Pin
VKM959/47HDV Chain, 47LK, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
Page 308
VKM1365HD Track Pin
VCR1632HD Spacer
VKM170HD Bushing
Track Hardware
Bottom Rollers
V81E5-2002V 81E9-17020 Roller Assembly S/F (R280LC Model)
V207.30.16102 E282-2002 Roller Assembly S/F (R280 Model) (20mm Bolt Hole)
Carrier Rollers
VKM1817 81E9-17030 Carrier Rollers
Idlers
E282-2004 Idler Group (For R280 Models)
V81E8-2004V 81E8-2004 Idler Group (For R290, R320 Models)
Sprockets
V81E5-2001V 81E5-2001 Sprocket (For RC290 Models Only)
VPC37 Weld on sprocket Rim (R280, R280LC Models)
Page 309
MODEL: Hyundai R350, R350LC, R420, R450LC
Dia.= 71.4mm Track Bolt Diameter =3/4"
Serial Nos: R350: (48LK) 14-Bottom Rollers, 4-Carrier Rollers
R420: (49LK) 14-Bottom Rollers, 4-Carrier Rollers

VCR5061/49 81E7-0021 Chain, 49L, Unsealed, w/ Master Pin (Bushing OD = 71.4mm)
VCR5061/53 82E7-0026 Chain, 53L, Unsealed, w/ Master Pin (Bushing OD = 71.4mm)
Your Track Groups
VCR4727 Sealed Pin
VCR1541 Seal Washer
C 53
VCR1537 Sea ed Master
Sealed aste Pin
VCR1540 Spacer
Your Track Groups
VCR4727HD Track Pin
VCR4728 Master Pin
VCR1541HD Seal Assembly
Track Hardware
V1S1859 Track Bolt (3/4" x 2 1/16")
V1S1860 Track Nut
Track Shoes
Bottom Rollers
VAT132116 81E7-0015 Use LH90 Roller
VLH90 Roller Assembly S/F
Carrier Rollers
VCR2876 81E7-0016 Carrier Rollers
VCR2876V 81E7-0016 Carrier Rollers (Optional)
Idlers
V81E8-2004V 81E8-2004 Idler Group (For R350 Models)
Page 310
MODEL: Hyundai R360LC-III, R360LC-7 R450LC-III
Specs 8.50" pitch, Link Ht = 129mm, Bushing O.D. =
74.6mm, Bolt Hole Dia. = 22mm
Serial Nos: R360LC-III: (51LK) 16-Bottom Rollers, 4-Carrier Rollers
R360LC-7: (51LK)
R450LC-III: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
Track Hardware **22 mm **
V79035320 Track Nut
Track
T k ShShoes ** 22 mm**
**
Bottom Rollers
VLH90 81E7-00631 Roller Assembly S/F
Carrier Rollers
VCR2876 81E7-0016 Carrier Rollers
VCR2876V 81E7-0016 Carrier Rollers (Optional)
Idlers
V5607652 81EH-10050 Idler Group (For R360LC-III Model)
81E7-01030-02 Idler Group (For R450LC-III Model)
Sprockets
V81EH-10010V 81EH-10010 Sprocket (For R360LC-III Model)
V84E7-00660V 84E7-00660 Sprocket (For R450LC-III Model)
Page 311
MODEL: International 500C, E
Specs: Track Pitch= 6.0", Link Height= 76.2mm, Bushing
O.D. 42.5mm, Bolt Diameter= 1/2"
Serial Nos: 500C: (35LK) 10-Bottom Rollers, 2-Carrier Rollers
500E: (35LK) 10-Bottom Rollers, 2-Carrier Rollers

VIN2799/35 636733R91 Chain, 35L, Sealed, w/ Master Pin
Your Track Groups
VIN2834 Link, R/H
VIN2835 Link, L/H
VIN2836 Track Bushing
VIN2837 Track Pin
VIN2838 Master Pin
Track Hardware
V8H7504 Track Bolt 1/2" X 1.1/2"
Track Shoes
VIN2873/12 Shoe, 3 B 12"
Bottom Rollers
VIN2800 Roller Assembly S/F
Carrier Rollers
VIN3132 Carrier Rollers
Idlers
VIN3192 Idler Group With Brackets
Sprockets
VIN2803 Sprocket 25-Tooth, 8-Bolt Hole (For 500C Model)
VIN3135 Sprocket 25-Tooth, 8-Bolt Hole (For 500E Model)
Page 312
MODEL: International TD6, TD6B
Specs: Track Pitch= 6.0", Link Height= 81.3mm, Bushing
O.D. 45.8mm, Bolt Diameter= 7/16
Serial Nos: TD6 Standard: (36LK) 4-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
TD6 Loader: (37LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
TD6B: (37LK) 6-S/F Rollers, 4-D/F Rollers

VIN2605/36 612739C91 Chain, 36L, Sealed, w/ SML
VIN2605/37 612740C91 Chain, 37L, Sealed, w/ SML
Your Track Groups
VIN2606 Link R.H..
VIN2607 Link L.H..
VIN1455 Pin
VIN1456 Bushing
VIN2609 Seal Washer
VIN2610 Spacer
VIN2641 Master Pin Complete
VIN2642/37 Pin and Bushing Kit, 37LK, Master Pin Type
Carrier Rollers
VIN2085 320640R91 Carrier Roller Assembly
Sprockets
V8448DB 8448DB Sprocket, 25-Tooth, 7-Bolt Hole
Page 313
MODEL: International TD7, TD7C, TD7E, 100C, 100E First
Type
Specs: Track Pitch = 6.0", Link Height = 81.3 mm, Bushing
Serial Nos: TD7: (37LK)
TD7C 01000-03000: (37LK) 10-Bottom Rollers, 4-Carrier Rollers
TD7E 03001-Up: (37LK) Note: For Wide Track, See 6.5" Pitch section
100C: (37LK) 10-Bottom Rollers, 2-Carrier Rollers
100E First Type: (37LK) 10-S/F Rollers, 2-Carrier Rollers

VIN2755/36 Chain, 36L, Sealed, w/ Master Pin
VIN2755/37 621295C91 Chain, 37L, Sealed, w/ Master Pin
VIN3021/36/14 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 14" Shoe
Your Track Groups
VLSTD7DRY Link Segment
VIN1455 Sealed Track Pin
VIN1456 Sealed Bushing (O.D. 45.8mm)
VIN2609 Seal Washer
VIN2610 Spacer
VIN2753 Track Link, R.H.
VIN2754 Track Link, L.H.
VIN2642/37 Pin and Bushing Group, 37LK
Track Hardware
V616191C1 Track Bolt, 1/2"
V6S3419 Track Nut, 1/2"
Track Shoes
VIN3020/12 622609C1 Shoe, 1 B 12"
VIN3020/14 Shoe, 1 B 14"
VIN3020/15 636527C1 Shoe, 1 B 15"
VIN3020/15V 636527C1 Shoe, 1 B 15" (Optional)
VIN3020/16 Shoe, 1 B 16"
VIN3020/18 Shoe, 1 B 18"
VIN3020/20 Shoe, 1 B 20"
VIN2905/12 622379C1 Shoe, 3 B 12"
VIN2905/13 622380C1 Shoe, 3 B 13"
Track Rollers
VIN2804 621462C94 Roller Assembly, SF
VIN2804V 621462C94 Roller Assembly, SF (Optional)
Carrier Rollers
VIN2805 Carrier Roller Assembly w/ seal group
Page 314
Idlers
VIN2806 Front Idler Group w/ Brackets
Sprockets
VIN2807 1211900H1 Sprocket
Page 315
MODEL: International TD7E Wide Track, TD7G, TD7G
Wide Track, TD8E Second Type, TD8E-LGP,
100E, 100G, 125E Second Type
Specs: Track Pitch = 6.5", Sealed- Link Ht. 87.5mm, Bushing
O.D. 52.1mm, Bolt Diameter= 1/2" Inline B/H
Track Pitch = 6.5", SALT-Link Ht. 97.5mm, Bushing

O.D. 53.8mm, Bolt Diameter=9/16" Offset B/H
Note: Check Bolt Diameter to Determine Track Chain Needed.

Serial Nos: TD7E Wide Track: (34 LK)
TD7E Long Track: (38 LK)
TD7G: (34 LK) 10-Bottom Rollers, 2-Carrier Rollers
TD7G Wide Track: (34 LK)
TD8E Second Type 9/16" Bolt Hole: (36LK) 10-Bottom Rollers, 2-Carrier
Rollers
TD8E-LGP 9/16" Bolt Hole: (40LK) 12-Bottom Rollers, 4-Carrier Rollers
100E Second Type (34LK) 10-Bottom Rollers, 2-Carrier Rollers
100G: (34 LK)
125E Second Type: (36LK) 10-Bottom Rollers, 2-Carrier Rollers
Sealed Chains and Track Groups 1/2" Inline Bolt Hole

VIN2557/34 Chain, 34L, Sealed, w/ Master Pin (Bushing O.D. 52.19 mm)-Bolt Diameter= 1/2"
VLSTD7GDRY Link Segment
VIN2598 Seal Washer
VIN2599 Spacer
VIN2596 Track Link, R.H., Link Height= 85.7mm-Bolt Diameter=1/2"
VIN2597 Track Link, L.H., Link Height= 85.7mm-Bolt Diameter=1/2"
VIN2602/36 Pin and Bushing Group, 36LKs, Master Pin Type
Track Hardware-Bolt Diameter=1/2"
V616191C1 Track Shoe Bolt (1.187" long)
Page 316
Track Shoes-Bolt Diameter=1/2"
VIN3408/13 Shoe, 1 B 13"
VIN3408/15 Shoe, 1 B 15"
VIN3408/16 Shoe, 1 B 16"
VIN3408/16V Shoe, 1 B 16" (Optional)
VIN3408/16M Shoe, 1 B 15" w/ Mud Hole
VIN3408/18 Shoe, 1 B 18"
VIN3408/24 Shoe, 1 B 24"
Lubricated Chains and Track Group 9/16" Offset Bolt Hole
VIN3450/34 1237164H93 Chain, 34L, SALT, w/ SML, Bolt Diameter = 9/16"

VIN3450/34V 1237164H93 Chain, 34L, SALT, w/ SML, Bolt Diameter = 9/16" (Optional)
VIN3450/40 Chain, 40L, SALT, w/ SML, Bolt Diameter = 9/16"
VIN3450/40V Chain, 40L, SALT, w/ SML, Bolt Diameter = 9/16" (Optional)
VIN3488/34/15 Track Group, 34L, SALT, w/ SML, w/ 1 B 15" Shoe
VIN3488/3415V Track Group, 34L, SALT, w/ SML, w/ 1 B 15" Shoe (Optional)
Your Track Groups
VIN3453/36 Pin and Bushing Group, 36LKs-SALT
VIN3484 Salt Track Pin
VIN3485 Salt Bushing (O.D. 52.19mm)
VIN3502 Master Link Complete, R.H.-Bolt Diameter=9/16"
VIN3503 Master Link Complete, L.H.-Bolt Diameter=9/16"
VFT1962 Seal Assembly
VCR3575 Thrust Ring
VIN3471 Track Link, R.H., Link Height = 97.5 mm-Bolt Diameter=9/16"
VIN3472 Track Link, L.H., Link Height = 97.5 mm-Bolt Diameter=9/16"
Track Hardware-Bolt Diameter=9/16"
V616199C1 Track Shoe Bolt
VD0207000N35 Master Link Bolt (Long) (4- Needed)
Track Shoes-Bolt Diameter=9/16"
VIN3451/15 1236985H1 Shoe, 1 B 15"
VIN3451/15V 1236985H1 Shoe, 1 B 15" (Optional)
VIN3451/16 Shoe, 1 B 16"
VIN3451/17 Shoe, 1 B 17"
VIN3451/18 Shoe, 1 B 18"
VIN3451/20 Shoe, 1 B 20"
VIN3451/24 Shoe, 1 B 24"
Track Rollers
Carrier Rollers
VIN3511 1233541H92 Carrier Roller (TD8E 2nd Type, 125E 2nd Type) (Oil Seal Included) Shaft Dia.= 1.11/16"
VIN3511V 1233541H92 Carrier Roller (TD8E 2nd Type, 125E 2nd Type) (Oil Seal Included) (Optional)
Page 317
Idlers
VIN2806 Front Idler Group w/ Brackets (For TD7E & TD7G)
VIN2998 Front Idler Shell w/ bushings
VIN2810 1280500H92 Front Idler Group with Bracket (TD8E ONLY)
Sprockets
VIN3491 741191C2 Sprocket, 23-Tooth, 8-Bolt Hole
VIN3491V 741191C2 Sprocket, 23-Tooth, 8-Bolt Hole (Optional)
VIN3492 1211902H2 Sprocket, 25-Tooth, 12-Bolt Hole (TD8E Second Type, TD8E-LGP, 125E First Type)
VIN3492V 1211902H2 Sprocket, 25-Tooth, 12-Bolt Hole (Optional)
Page 318
MODEL: International TD8B, C,E, 125B,125C,125E,
Specs: Track Pitch = 6.5", Link Height=85.7mm, Bushing
Serial Nos: TD8B: (36LK) 6-S/F Rollers, 4-D/F Rollers
TD8C: (36LK) 10-Bottom Rollers, 2-Carrier Rollers
TD8E First Type: (36LK) 10-Bottom Rollers, 2-Carrier Rollers
125B: (36LK) 6-S/F Rollers, 4-D/F Rollers
125C: (36LK) 10-Bottom Rollers, 2-Carrier Rollers
125E First type: (36LK) 10-Bottom Rollers, 2-Carrier Rollers

VIN2557/36 703125C92 Chain, 36L, Sealed, w/ Master Pin (OEM Reference 703234C)
Your Track Groups
VIN2598 Seal Washer
VIN2599 Spacer
VIN2596 Track Link, R.H., Link Height= 85.7mm
VIN2597 Track Link, L.H., Link Height= 85.7mm
Track Hardware
Track Shoes
VIN3408/13 46839DC Shoe, 1 B 13"
VIN3408/14 Shoe, 1 B 14"
VIN3408/15 Shoe, 1 B 15"
VIN3408/16 49467DC Shoe, 1 B 16"
VIN3408/16V 49467DC Shoe, 1 B 16" (Optional)
VIN3408/16M Shoe, 1 B 16" w/ Mud Hole
VIN3408/18 Shoe, 1 B 18"
VIN3408/20 Shoe, 1 B 20"
VIN3408/24 Shoe, 1 B 24"
VIN2909/14 622383C1 Shoe, 3 B 14"
Track Rollers
VIN2808 621481C93 Roller Assembly, SF (TD8C, TD8E, 125C, 125E & 165 ONLY)
VIN2808V 621481C93 Roller Assembly, SF (TD8C, TD8E, 125C, 125E & 165 ONLY) (Optional)
Carrier Rollers
VIN2809 Carrier Roller Assembly (TD8C, TD8E First Type, 125C & 125E First Type) (Oil Seal
Included) Shaft Dia.= 1.3/4"
VIN2809V Carrier Roller Assembly (TD8C, TD8E First Type, 125C & 125E First Type) (Oil Seal
Included) Shaft Dia.= 1.3/4" (Optional)
Page 319
Idlers
VIN2810 1280500H92 Front Idler Group with Bracket (TD8C, TD8E, 125C & 125E ONLY)
Sprockets
VIN2789 Sprocket (TD8C, TD8E, 125C & 125E ONLY) (OEM Ref. 621136C1)
VIN3492 1211902H2 Sprocket, 25-Tooth, 12-Bolt Hole (TD8C, TD8E, 125C, 125E Second Type)
VIN3492V 1211902H2 Sprocket, 25-Tooth, 12-Bolt Hole (TD8C, TD8E, 125C, 125E Second Type) (Optional)
VIN2978 Sprocket Rim (TD8C, TD8E, 125C & 125E ONLY)
Page 320
MODEL: International TD7H, TD8H, TD8G, TD9H, TD10
Serial Nos:
TD7H: 25501-UP(34 LK) 10-Bottom Rollers, 2-Carrier Rollers
TD7H-LGP: (34LK) 10-Bottom Rollers, 2-Carrier Rollers
TD8H: 35501-up (37 LK) 12-Bottom Rollers, 2-Carrier Rollers
TD8G: (36LK) 10-Bottom Rollers, 2-Carrier Rollers
TD8G-LGP: (40 LK)
125G: (36 LK) 10-Bottom Rollers, 2-Carrier Rollers
TD9H: 45501-UP (39 LK) 12-Bottom Rollers, 2-Carrier Rollers
TD10: (39LK)

VIN3454/36 1237167H91 Chain, 36L, Sealed, w/ Master Pin
Your Track Groups
VIN3478 Sealed Bushing (O.D.
(O D 53.8mm)
53 8mm)
VCR2562 Seal Washer
VCR3197 Spacer
VIN3455/36 Pin and Bushing Group, 36L-(Master Pin type)
VIN3455/39 Pin and Bushing Group, 39L-(Master Pin type)
VIN3450/34 Chain, 34L, SALT, w/ SML
VIN3450/34V Chain, 34L, SALT, w/ SML (Optional)
VIN3450/39 1281311H91 Chain, 39L, SALT, w/ SML
VIN3450/39V 1281311H91 Chain, 39L, SALT, w/ SML (Optional)
Your Track Groups
Page 321
VIN3502 Master Link Complete, R.H.
VIN3503 Master Link Complete, L.H.
VCR3575 Thrust Ring
Track Hardware
VD0207000N35 Master Link Bolt-Long (4- Needed)
Track Shoes
VIN3451/15 Shoe, 1 B 15"
VIN3451/16 Shoe, 1 B 16"
VIN3451/17 Shoe, 1 B 17"
VIN3451/18 Shoe, 1 B 18"
VIN3451/20 Shoe, 1 B 20"
VIN3451/24 Shoe, 1 B 24"
Track Rollers
VIN2808 621481C93 Roller Assembly, SF (For TD8G & TD9H Models)
VIN2808V 621481C93 Roller Assembly, SF (For TD8G & TD9H Models) (Optional)
VPC358 Seal Group
Carrier Rollers
VIN3511 1233541H92 Carrier Roller Assembly
VIN3511V 1233541H92 Carrier Roller Assembly (Optional)
Idlers
VIN2810 1280500H92 Front Idler Group with Bracket (** TD8G & 125G Only **)
VIN3802V 1280499H92
VIN3810V Front Idler Group (For TD9H)
Sprockets
VIN3491 741191C2 Sprocket (For TD7H & TD8H)
VIN3491V 741191C2 Sprocket (For TD7H & TD8H) (Optional)
VIN3492 1298898H1 Sprocket (For TD8G ,TD9H, TD10, 125G)
VIN3492V 1298898H1 Sprocket (For TD8G ,TD9H, TD10, 125G) (Optional)
Page 322
MODEL: International T9, TD9, TD9-91, TD9-92, TD9B,
150,
Specs: Track Pitch = 6.5", Link Height=85.7mm, Bolt
Diameter= 1/2"
Serial Nos: T9: (33 LK)
TD9: (39 LK)
TD9-91 Standard: (33 LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
TD9-91 Extended: (36LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
TD9-91 Large Idler, Extended: (37LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier
Rollers
TD9-92 Standard: (33 LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
TD9-92 Extended: (36LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
TD9-92 Large Idler, Extended: (39LK) 4-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
TD9B: (36 LK) 6-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers

VIN2557/36 703125C92 Chain, 36L, Sealed, w/ Master Pin (OEM Reference 703234C)
VIN2594/36/16 Track Group
Group, 36L
36L, Sealed
Pin, w/ 1 B 16"
16 Shoe
VIN259436/20 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 20" Shoe
Your Track Groups
VIN2598 Seal Washer
VIN2599 Spacer
Track Hardware
Track Shoes
Page 323
VIN3408/13 46839DC Shoe, 1 B 13"
VIN3408/14 Shoe, 1 B 14"
VIN3408/15 Shoe, 1 B 15"
VIN3408/16 Shoe, 1 B 16"
VIN3408/16M Shoe, 1 B 16" With Mud Hole
VIN3408/18 Shoe, 1 B 18"
VIN3408/20 Shoe, 1 B 20"
VIN3408/24 Shoe, 1 B 24"
VIN2909/14 Shoe, 3 B 14"
Track Rollers
VIN2295 272647R93 Roller Assembly, SF
VIN2296 272648R93 Roller Assembly, DF
Track Rollers
VIN2093 320642R91 Carrier Roller Assembly
Sprockets
VIN1471 8450DC Sprocket, 27 tooth, 7-Bolt Hole
Page 324
MODEL: International TD8E Wide Track
Specs: Track Pitch = 7", Link Height=104.8mm, Bushing Dia.
= 60mm, Bolt Diameter= 9/16"
Serial Nos: TD8E: (34 LK)

Your Track Groups
VIN3114/37 Pin & Bushing Kit 37Lk, Sealed M/P
VLSTD8EDRY Link Segment
VIN3109 Track Link, L/H
VIN3108 Track Link, R/H
VIN3111 Track Pin
VIN2566 Seal Washer
VIN2565 Spacer
Track Hardware
Page 325
MODEL: International TD12
Diameter= 5/8"
Serial Nos: TD12: (37LK) 6-S/F Rollers, 6-D/F Rollers
TD12-LGP: (42LK) 8-S/F Rollers, 6-D/F Rollers

VIN3260/37 743246C93 Chain, 37L, SALT, w/ SML
VIN3260/42 743263C93 Chain, 42L, SALT, w/ SML (TD12-LGP)
Your Track Groups
VIN3259/40 Pin & Bushing Group 40Lk SLT
VIN3274 Link, L/H
VIN3275 Link, R/H
VIN3284 Track Pin
VIN3286 Seal Assembly
VIN3287 Thrust Ring
VCR3433 Plug
Track Shoes
VIN2982/16 655032C1 Track Shoe, 1 B 16"
VIN2982/34 740772C1 Track Shoe 1 B 34"
Track Hardware
V616207C1 Bolt 5/8X2.3/8"
V1M1408 Nut 5/8"
Bottom Rollers
VIN2282 604929C93 Roller Group S.F.
VIN2283 604930C93 Roller Group D.F.
Sprockets
V1211904H1 1211904H1 Sprocket
Front Idlers
Use OEM Idler
Page 326
MODEL: International TD12C, TD12CXP
Diameter= 3/4"
Serial Nos: TD12C: 20501-up (37LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
TD12C-LGP: 25001-up (42LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
TD12CXP: 20501-up (37LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

TD12CXP-LGP: 25001-Up (42LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers

VIN3252/37 1278314H91 Chain, 37L, Sealed, w/ SML
VIN3252/42 1278408H91 Chain, 42L, Sealed, w/ SML (TD12C-LGP)
VIN3300/37/20 Track Group, 37L, Sealed, w/ SML, w/ 1 B 20" Shoe
Your Track Groups
VIN3299 Seal Washer
VIN2573 Spacer
VIN3290/39 Pin and Bushing Group, 39L,Master Pin Type
Your Track Groups
VIN3264 Master Link Complete, L.H. (2 Pieces)
VIN3263 Master Link Complete, R.H. (2 Pieces)
VIN3305 Thrust Ring
Track Hardware
V739150C1 Master Link Bolt, 3/4"
Track Shoes
VIN2901/16 655559C1 Shoe, 1 B 16"
VIN2901/20 Shoe, 1 B 20"
VIN2901/22 Shoe, 1 B 22"
VIN2901/24 Shoe, 1 B 24"
Bottom Rollers
VIN2791 655045C93 Roller Assembly, SF (No Longer Available) (See IN3429)
VIN2792 655046C93 Roller Assembly, DF (No Longer Available) (See IN3430)
Page 327
VIN2849 Roller Shell, SF w/Bushings
VIN2851 Roller Shell, DF w/Bushings
VIN3429 741145C92 Roller Assembly, SF (** Cannot Use With *USED* Old Style Rollers **) (Will Work With
*NEW* Old Style Rollers)
VIN3429V 741145C92 Roller Assembly, SF (** Cannot Use With *USED* Old Style Rollers **) (Will Work With
*NEW* Old Style Rollers) (Optional)
VIN3430 741146C92 Roller Assembly, DF (** Cannot Use With *USED* Old Style Rollers **) (Will Work With
VIN3430V 741146C92 Roller Assembly, DF (** Cannot Use With *USED* Old Style Rollers **) (Will Work With
Carrier Rollers
VIN3382 707870C92 Carrier Roller Assembly
VIN3382V 707870C92 Carrier Roller Assembly (Optional)
VIN3383 Carrier Roller Shell
Sprockets
Use OEM Sprocket
Front Idlers
VIN3435 742427C91 Front Idler Group
VIN3436 Front Idler w/Bushings
Page 328
MODEL: International TD15, TD15B, 175, 175B, 175C
Serial Nos: TD15: Up to 00151 (39LK) 8-S/F Rollers, 4-D/F Rollers
TD15: Extended Up to 00151 (42LK) 6-S/F Rollers, 8-D/F Rollers
TD15B: Up to 25000 (39LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
175: (39LK)
175B:9601-10125 (39LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
175C: Up to 3500 (39LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers

VIN2558/39 703134C91 Chain, 39L, Sealed, w/ Master Pin (TD15B-25000, 175B, 175C-3500 - Bolt Diameter 9/16")
VIN2558/41 620194C92 Chain, 41L, Sealed, w/ Master Pin (Bolt Diameter 9/16")
Your Track groups
VIN2540/39 Pin and Bushing Group, 39L,Master Pin Type-TD15B-25001, 175B, 175C-3500
VIN2562 Track Link R/H
VIN2563 Track Link L/H
V316595R1 Track Pin
VIN2564 Master Pin
VIN2565 Spacer
VIN2566 Seal Washer
Track Shoes
VIN3103/16 49766DD Shoe, 1 B 16"
VIN3103/18 51074DD Shoe, 1 B 18"
VIN3103/20 51076DD Shoe, 1 B 20"
VIN3017/16 325401R1 Shoe, 3 B 16"
Track Hardware
Bottom Rollers
VIN2282 604929C93 Roller Group S.F. (No Longer Available) (See IN3429)
VIN2283 604930C93 Roller Group D.F. (No Longer Available) (See IN3430)
Carrier Rollers
VIN3225 609600C93 Carrier Roller Assembly (TD15B S/N:20312-25000 , TD15C-up to 4716)
VIN2538 Carrier Roller Shell-TD15B
VIN2420 325196R92 Carrier Roller (For TD15B S/N: 07260-20311, 175B S/N: 9601-10125) (C02151G1N00)
Idlers
VIN2793 703613C91 Front Idler with Shaft(For TD15B 20312-UP and 175B 10065-UP/ 175C)
Sprockets
Page 329
VIN2206 1211913H1 Sprocket (Mounting Bolt 5/8")TD15B, 175, 175B, 175C-2451
VIN2206V Sprocket (Mounting Bolt 5/8")TD15B, 175, 175B, 175C-2451 (Optional)
VIN3148 1211910H1 Sprocket, 175C S/N 2452-3500 7/8 Bolt Hole
Page 330
MODEL: International TD15B, 175, 175B, 175C
Dia.= 66.47mm Bolt Diameter= 5/8"
TD15B: 25001-Up (37LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
175B: 10126-Up (37LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
175C up to 3500 (37LK) ** For severe Service Suspension ** 6-S/F Rollers, 6-
** For track Groups, Use 3/4" Bolt Hole Chains **

VIN2845/37 655005C92 Chain, 37L, Sealed, w/Master Pin (TD15B, 175B, 175C-3500 - Bolt Diameter 5/8")
Your Track Groups
VLSTD15CDRY Link Segment
VIN2569 Track Link L/H 5/8" Bolt Hole
VIN2568 Track Link R/H 5/8" Bolt Hole
VIN2573 Spacer
VIN2574 Seal Washer
Track Hardware
V616207C1 Track Bolt 5/8"
V1M1408 Track Shoe Nut, 5/8" (use for T45097)
Track
T k ShShoes
VIN2982/16 655032C1 Track Shoe, 1 B 16"
VIN2982/22 655034C1 Track Shoe, 1 B 22"
VIN3396/15 655011C1 Track Shoe, 3 B 15"
VIN3396/16 655016C1 Track Shoe, 3 B 16"
Bottom Rollers
VIN2282 604929C93 Roller Group S.F. (No Longer Available) (See IN3429)
VIN2283 604930C93 Roller Group D.F. (No Longer Available) (See IN3430)
VIN2791 655045C93 Roller Assembly, SF ** Use For Severe Service Suspension ** (No Longer Available) (See
IN3429)
VIN2849 Roller Shell, SF w/Bushings ** Use For Severe Service Suspension **
VIN2792 655046C93 Roller Assembly, DF ** Use For Severe Service Suspension ** (No Longer Available) (See
IN3430)
VIN2851 Roller Shell, DF w/Bushings ** Use For Severe Service Suspension **
Carrier Rollers
Sprockets
Page 331
VIN2794 1211912H1 Sprocket-27 tooth, 6-Bolt Hole (Mounting Bolt 5/8") TD15B, 175B, 175C S/N up to 2451
"For Severe Service Suspension Only TD15B,C,175B,C"
VIN2794V Sprocket-27 tooth, 6-Bolt Hole (Mounting Bolt 5/8") TD15B, 175B, 175C S/N up to 2451
"For Severe Service Suspension Only TD15B,C,175B,C" (Optional)
Idlers
VIN2793 703613C91 Front Idler with Shaft(For TD15B 20312-UP and 175B 10065-UP/ 175C)
Page 332
MODEL: International TD15B Severe Service, TD15C,
TD15C-LGP, 175C
Serial Nos: TD15B Severe Service G-20399-Up: (39LK) 6-S/F Rollers, 6-D/F Rollers, 4-
Carrier Rollers
TD15B Severe Service P-20399-25000: (37LK) 6-S/F Rollers, 6-D/F Rollers 4-
Carrier Rollers
TD15C: (39LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
TD15C-LGP: (44LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
175C: 3501-up (37LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers

VIN2828/37/20 624503C91 Track Group, 37L, Sealed, w/ Master Pin, w/ 1 B 20" Shoe
Your Track Groups
VIN2822 655006C1 Sealed Track Pin (O.D. 44.45mm)
VIN2824 655008C1 Sealed Bushing (O.D. 66.47mm)
VIN2574 616203C1 Seal Washer
VIN2573 Spacer
VIN3252/37 Chain, 37L, Sealed, w/ SML
VIN3300/37/20 Chain, 37L, Sealed, w/ SML, w/ 1 B 20" Shoe
Your Track Groups
VIN3297 739241C1 Sealed Track Pin (O.D. 41.275mm)
VIN3298 739242C1 Sealed Bushing (O.D. 66.47mm)
VIN3299 739259C1 Seal Washer
VIN3292 739229C1 Track Link, R.H.
VIN3291 739228C1 Track Link, L.H.
VIN3290/39 Pin and Bushing Group, 39L Sealed
VIN3251/39 743375C92 Chain, 39L, SALT, w/ SML (OEM Reference #743376C)
Page 333
Your Track Groups
VIN3305 Thrust Ring
Track Hardware
Track Shoes
VIN2901/16 655559C1 Shoe, 1 B 16"
VIN2901/20 Shoe, 1 B 20"
VIN2901/22 Shoe, 1 B 22"
VIN2901/24 Shoe, 1 B 24"
VIN3449/16 740880C1 Shoe, 2 B 16"
Bottom Rollers
VIN2791 655045C93 Roller Assembly, SF (No Longer Available) (See IN3429)
VIN2792 655046C93 Roller Assembly, DF (No Longer Available) (See IN3430)
Carrier Rollers
VIN3225 609600C93 Carrier Roller Assembly (TD15B Severe Service, TD15C Up To 4716, 175C S/N: 3501-Up)
V655973C91 Seal Group For IN3225 & IN3382
VIN3382 707870C92 Carrier Roller Assembly (OEM Reference 707870C)- TD15C-4717-up
VIN3382V 707870C92 Carrier Roller Assembly (OEM Reference 707870C)- TD15C-4717-up (Optional)
VIN3383 Carrier Roller Shell-TD15C
Idlers
VIN2793 703613C91 Front Idler with Shaft
VIN2854 Idler Shell (TD15B 6001-20311, 175, 175B 9601-10064)
Sprockets
VIN2794 1211912H1 Sprocket-27 tooth (Mounting Bolt 5/8") (TD15B Severe Service, TD15C:S/N 1-2511)
VIN2794V Sprocket-27 tooth (Mounting Bolt 5/8") (TD15B Severe Service, TD15C:S/N 1-2511)
(Optional)
VIN3104 1211908H1 Sprocket-27 tooth (Mounting Bolt 7/8")TD15C;S/N 2512-up (OEM Reference# 743159C)
VIN3104V 1211908H1 Sprocket-27 tooth (Mounting Bolt 7/8")TD15C;S/N 2512-up (Optional)
Page 334
MODEL: International TD15E, TD15E-LGP, 200E, TD15H,
TD15H-LGP
Specs: Track Pitch =8.0", Link Height=120.5mm, Bushing
Serial Nos: TD15E: (39LK) 6-S/F Bottom Rollers, 6-D/F Bottom Rollers, 4-Carrier Rollers
TD15E-LGP: (42LK) 8-S/F Bottom Rollers, 6-D/F Bottom Rollers, 4-Carrier

Rollers
200E: (39LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
200E LGP: (42LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
TD15H: (39LK)
TD15H-LGP: (42LK)

VIN3411/39 1284028H91 Chain, 39L, Sealed, w/ SML
Your Track Groups
VIN3416 Seal Washer
Your Track Groups
VIN3426 Thrust Ring
Track Hardware
Page 335
Track Shoes
VIN3419/20 743364C1 Shoe, 1 B 20"
VIN3419/22 743365C1 Shoe, 1 B 22"
VIN3419/24 743103C1 Shoe, 1 B 24"
VIN3419/26 743319C1 Shoe, 1 B 26"
VIN3498/18 743178C1 Shoe, 2 B 18"
VIN3498/20 743277C1 Shoe, 2 B 20"
Bottom Rollers
VIN3429V 741145C92 Roller Assembly, SF (Optional)
VIN3430 741146C92 Roller Assembly, DF
VIN3430V 741146C92 Roller Assembly, DF (Optional)
Carrier Rollers
Front Idlers
VIN3435 741194C1 Front Idler Group
VIN3436 Front Idler w/Bushings
Sprocket
VIN3444 1211905H1 Sprocket-27 tooth
VIN3444V 1211905H1 Sprocket-27 tooth (Optional)
Page 336
MODEL: International TD20, B, C, 250B, C
Specs: Track Pitch = 7.5", Link Height= 62mm, Bushing O.D.
Serial Nos: TD20
TD20B
TD20C: UP TO 25841
250B
250C:UP TO 12448


VIN2746 Link L.H..
VIN2745 Link R.H..
VIN2577 Pin
VIN2211 Bushing
VIN2570 Master Pin
VIN2574 Seal Washer
VIN2573 Spacer
Sprockets
VIN2798V Sprocket, 29-Tooth, 6-Bolt Hole
Page 337
MODEL: International TD20B, TD20C, 250C
Specs: Track Pitch =8.5", Link Height=122mm, Bushing O.D.
Serial Nos: TD20B & C: SEVERE SERVICE SUSPENSION
TD20C: S/N 25842-Up
250C: S/N 12449-Up (38 LK)

VIN2796/37 Chain, 37L, Sealed, w/ Master Pin (TD20C-25842-up, 250C-12449-25841)
VIN2796/38 Chain, 38L, Sealed, w/ Master Pin (TD20C-25842-up, 250C-12449-25841)
Your Track Groups
VLSTD20BDRY Link Segment
VIN2866 Sealed Bushing (O.D.72.77mm)
VIN3032 Spacer
VIN2585 Seal Washer
VIN2861/38 Pin and Bushing Group
Group, 39L
39L,Master
Master Pin Type
Track Hardware
Track Shoes
VIN2870/20 Shoe, 1 B 20"
VIN2870/22 Shoe, 1 B 22"
VIN2870/24 Shoe, 1 B 24"
Bottom Rollers
VIN2274 Roller Assembly, SF
VIN2275 Roller Assembly, DF
VIN1949 Roller Shell, SF w/ Bushings
VIN1950 Roller Shell, DF w/ Bushings
Carrier Rollers
VIN3234 Carrier Roller Assembly-TD20C
Sprockets
VIN2797 Sprocket Rim-TD20C 25842-27615, 250C 12449-up
VIN3140 Sprocket-TD20C 27616-up, 250C 12201-up
Page 338
MODEL: International TD20E, TD20E LGP, TD20G
Specs: Track Pitch =8.5", Link Height=127mm, Bushing O.D.
Serial Nos: TD20E: (39LK) 6-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
TD20E-LGP: (42LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
TD20G: S/N 51001-51097, 51121-51137, 35001-35269 (39 LK) 6-S/F
TD20G: S/N 51098-51120, 51138-Up, 35270-Up (40 LK) 6-S/F Rollers, 6-D/F
TD20G-LGP: (42 LK) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
Note: Cat D7G Track Groups May Be Substituted

VIN3033/39 Pin & Bushing Group 39LK

VIN3025 Link L.H..
VIN3024 Link R.H..
VIN3028 Track Pin
VIN2585 Seal Washer
VIN3032 Spacer
Sealed W/SML Chains and Track Groups
Your Track Groups
VIN3033/39 Pin & Bushing Group 39LK
VIN2585 Seal Washer
VIN3253/39 Chain, 39L, SALT, w/ SML (OEM Reference # 743191C)
Your Track Groups
Page 339
VIN3318 Thrust Ring
Track Hardware
VIN3389 Master Link Bolt, 3/4"
Track Shoes
VIN2870/20 Shoe, 1 B 20"
VIN2870/22 Shoe, 1 B 22"
VIN2870/24 Shoe, 1 B 24"
VIN2870/26 Shoe, 1 B 26"
Bottom Rollers
VIN3078 Roller Assembly, SF (OEM Reference 655474C)-S/N 30001-up
VIN3078V Roller Assembly, SF (OEM Reference 655474C)-S/N 30001-up (Optional)
VIN3079 Roller Assembly, DF (OEM Reference 655475C)-S/N 30001-up
VIN3079V Roller Assembly, DF (OEM Reference 655475C)-S/N 30001-up (Optional)
VIN3093 Roller Shell, SF w/ Two Bushings
VIN3094 Roller Shell, DF w/ Two Bushings
Carrier Rollers
VIN3136 Carrier Roller Assembly
Front Idlers
VIN3138 Front Idler Group Less Brackets
VIN3139 Front Idler Shell with Bushings
V655973C91 655973C91 Seal Group
Sprockets
VIN3080 Sprocket (S/N 30001 up)(OEM Reference 655425C)
VIN3080V Sprocket (S/N 30001 up)(OEM Reference 655425C) (Optional)
Page 340
MODEL: International TD25C, TD25E, TD25G, TD30
Specs: Track Pitch =9.875", Link Height=139.7mm, Bushing
Serial Nos: TD25C(38 LK)
TD25E(38 LK)
TD25G(38 LK) 6-S/F Roller, 8 D/F Roller, 2-Long Shaft & 2-Short Shaft T/C
TD30(37 LK)
Sealed W/Master Pin Chains and Track Groups

VIN2632/38 Pin and Bushing Group, 38LK, Master Pin Type

VIN2635 Seal Washer

VIN3268/38/24 Track Group
Group, 38L
38L, Sealed
Sealed, w/ SML
SML, w/ 1 B 24"
24 Shoe

Your Track Groups
VIN2635 Seal Washer
VIN3324/38 Pin and Bushing Group, 38LK, Split Master Link Type
VIN3255/38 743159C93 Chain, 38L, SALT, w/ SML
VIN3333/38/28 Tarck Group, 38L, SALT, w/ SML, w/ 1 B 28" Shoe
Your Track Groups
VIN3332 Thrust Ring
Page 341
VIN3329/38 Pin and Bushing Group, 38LK-SALT
Track Hardware
V316910R1 Track Shoe Bolt, 7/8"
V2S2140 Track Shoe Nut 7/8"
V740568C1 Master Link Bolt, 7/8" (Long) 4- Required for Sorefa/ITM chains
VIN3360 Master Link Bolt, 7/8" (Short) Note: 2-Long and 2-Short are used for Berco only
Track Shoes
VIN2639/22 Shoe, 1 B 22"
VIN2639/24 Shoe, 1 B 24"
VIN2639/26 Shoe, 1 B 26"
VIN2639/28 Shoe, 1 B 28"
Bottom Rollers
VIN2648 1299174H91 Roller Assembly, SF
VIN2649 1299175H91 Roller Assembly, DF
VIN2333 Roller Shell S.F.
VIN2679 Roller Shell D.F.
Carrier Rollers
VIN3240 700475C93 Carrier Roller Assembly(Front)-TD25B, TD25C, TD25E, TD25G, TD30
VIN3241 345755R93 Carrier Roller Assembly(Rear)-TD25B, TD25C, TD25E, TD25G, TD30
Front Idlers
VIN2662 Front Idler Group with Shaft (TD25C & TD25E ONLY)
VIN2654 Idler Shell (TD25C & TD25E ONLY)
VIN3512 1299083H91 Front Idler Group with Shaft (TD25G ONLY)
VIN3513 Front Idler Shell w/Bushings
Sprockets
VIN2663 617942C4
61 942C4 Sprocket
S k Bolt
B l OOn
VIN2663V 617942C4 Sprocket Bolt On (Optional)
Page 342
MODEL: International TD40, TD40B
Specs: Track Pitch = 280mm, Link Height=160mm, Bushing
O.D. 94.5mm, Bolt Diameter= 1.1/8"
Serial Nos: TD40: (39Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers
TD40B: S/N PO 00701-Up (39Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers
TD40B: S/N UO 02001-Up (39Lk) 6-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers

1280898H91 Chain, 39L, SALT, w/ SML
Your Track Groups
Bottom Rollers
728868C91 Roller Assembly S/F
728869C91 Roller Assembly D/F
Carrier Rollers
V729354C91 729354C91 Carrier Rollers
Page 343
MODEL: JCB JS70 Second Type, JZ70
Serial Nos: JS70: (39LK)
JZ70: (39LK)
Rubber Tracks
V64776SI Rubber Track (For JZ70)
Your Track Groups
Track Shoes
VKM1685/450 Shoe, 3 B 450mm
VKM1685/450V Shoe, 3 B 450mm (Optional)
VAT183364 2041367 Shoe, 3 B 600mm
Track Hardware
Bottom Rollers
VAP34339 JAA0011 Roller Assembly
VAP34339V JAA0011 Roller Assembly (Optional)
Carrier Rollers
VAP34340 JAA0012 Carrier Rollers
VAP34340V JAA0012 Carrier Rollers (Optional)
Idlers
VAT183365 Idler with Brackets
VAT183365V Idler with Brackets (Optional)
Sprockets
VLK319 JAA0015 Sprocket
Page 344
MODEL: JCB JS110LC, JS130
Specs Pitch = 171.5mm, Link Height = 94.5mm, Track
Bushing O.D. =50.6mm & 16mm Bolt Diameter
Serial Nos: JS110LC: (41LK) 12-Bottom Rollers, 2-Carrier Rollers
JS130: (44LK) 14-Bottom Rollers, 2-Carrier Rollers

Your Track Groups
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Track Shoes
Page 345
Track Hardware
V7H3597 Track Bolt, 5/8 X 2.1/8"
Bottom Rollers
VHT49 331/49770 Roller Assembly (For JS110LC Model)
VHT49V Roller Assembly (For JS110LC Model) (Optional)
VLK42 331/42460 Roller Assembly (For JS130 Model)
Carrier Rollers
VAT154514 331/49768 Carrier Roller (For JS110LC Model)
VAP34654V Carrier Roller (For JS110LC Model) (Optional)
VLK31 Carrier Roller (For JS130 Model)
VLK31V Carrier Roller (For JS130 Model) (Optional) (Can Use VKTA1251V)
Idlers
VKNA0540V Idler with Brackets (For JS130 Model)
Sprockets
VKNA0323V 331/49767 Sprocket (For JS110LC Model)
N/A 331/42434 Sprocket (For JS130 Model)
Page 346
MODEL: JCB JS150LC, JS200 First Type, JS200LC First
Type
Serial Nos: JS150LC: (47LK)
JS200 First Type: (47LK)
JS200LC First Type: (53LK)

Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Track Hardware
V70598931 Track Bolt 18mm X 60mm
Track Shoes
VHT20/600 Shoe, 3 B 600 mm
VHT20/700 Shoe, 3 B 700 mm
Bottom Rollers
VLK29V Outer Flange Roller Assembly
VLK30V Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
VLK31 331/42441 Carrier Rollers
VLK31V Carrier Rollers (Optional) (Can Use VKTA1251V)
Idlers
Sprockets
Page 347
MODEL: JCB: JS160L, JS160NL, JS180L, JS180NLC,
JS200 Second Type, JS200LC Second Type,
JS220LC, JS220LR, JS220N, JS220S, JS240LC
Second Type, JS240NLC Second Type, JS240S
Second Type, JS260LC Second Type,
JS260NLC Second Type, JS260S Second Type

Serial Nos: JS160L: (43LK) 14-Bottom Rollers, 4-Carrier Rollers
JS160NL: (43LK) 14-Bottom Rollers, 4-Carrier Rollers
JS180L: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
JS180NLC: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
JS200 Second Type: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
JS200LC Second Type: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
JS220LC: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
JS220LR: (49LK) 14-Bottom Rollers, 4-Carrier Rollers
JS220N: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
JS220S: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
JS240NLC Second Type: (51LK) 18-Bottom Rollers, 4-Carrier Rollers
JS240S Second Type: (47LK) 14-Bottom Rollers, 4-Carrier Rollers
JS260NLC Second Type: (51LK) 18-Bottom Rollers, 4-Carrier Rollers
JS260S Second Type: (47LK) 14-Bottom Rollers, 4-Carrier Rollers

VCR5350/43 JLA0317 Chain, 43L, Sealed, w/ Master Pin
VCR5350/46 JRA0193 Chain, 46L, Sealed, w/ Master Pin
VCR5350/47 JBA0122 Chain, 47L, Sealed, w/ Master Pin
VCR5350/49 JRA0082 Chain, 49L, Sealed, w/ Master Pin
VCR5350/51 JBA0121 Chain, 51L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Page 348
Your Track Groups
VCR5096HD Spacer
Track Hardware
V6Y0846 Track Shoe Bolt, 20mm X 63mm (Use With ESS Track Shoes)
Track Shoes
VCR5015/500 Track
T k Shoe,
Sh w// 3 B 500mm,
500 ESS
Bottom Rollers
VLK29V 331/42639 Outer Flange Roller
VLK157 331/43853 Outer Flange Roller (JS240LC, JS240NLC, JS240S, JS260LC, JS260NLC, JS260S Model)
Carrier Rollers
Idlers
VLK144 JRA0214YA Idler Group
VLK148 Idler Group (For JS240LC, JS240NLC, JS240S, JS260LC, JS260NLC, JS260S Models)
Sprockets
VLK262 331/42629 Sprockets (For JS160L, JS160NL Model)
VLK105V 331/42641 Sprocket, 21-Tooth, 22-Bolt Hole
Page 349
MODEL: JCB: JS240LC First Type, JS240S First Type,
JS260LC First Type, JS260S First Type,
JS300LC First Type
Serial Nos: JS240LC First Type: (51LK) 18-Bottom Rollers, 4-Carrier Rollers
JS240S First Type: (47LK) 16-Bottom Rollers
JS260LC First Type: (51LK) 18-Bottom Rollers, 4-Carrier Rollers
JS260S First Type: (47LK) 16-Bottom Rollers
JS300LC First Type: (50LK) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VKM1365 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Unsealed Track Chains and Track Groups
Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM959/51HD Chain, 51L, Sealed & Greased, w/ Master Pin (OEM Reference 207-32-00042)
VKM959/51HDV Chain, 51L, Sealed & Greased, w/ Master Pin (OEM Reference 207-32-00042) (Optional)
Page 350
Your Track Groups
VKM1033HD Link, R/H
VKM1034HD Link, L/H
VKM1365HD Track Pin
VCR1632HD Spacer
Track Hardware
V155.32.11210
V155 32 11210 4143721 Track Shoe Bolt
Bolt, 20mm X 68mm
Track Shoes
Bottom Rollers
VLK58 331/43219 Outer Flange Roller Assembly
VLK58V 331/43219 Outer Flange Roller Assembly (Optional)
VLK59 Outer Flange Roller Assembly
VLK59V Outer Flange Roller Assembly (Optional)
Carrier Rollers
VLK60V 331/43272 Carrier Rollers (Optional)
Idlers
Idler Group
Sprockets
VLK107 Sprockets (For JS160L, JS160NL Model)
VLK107V Sprocket, 21-Tooth, 22-Bolt Hole
Page 351
MODEL: John Deere 2010, 350, 350A, 350B, 350C, 350D,
400G, 400G-LT
Specs Track Pitch = 5.75", Link Height = 81mm, Bushing OD
= 44.45mm
Serial Nos: 2010:S/N 42001-Up 10-S/F Rollers
JD350: (36 LK) 10- S/F Rollers
JD350A: (36 LK) 10- S/F Rollers
JD350B: (36 LK) 10- S/F Rollers
JD350C: (36 LK) 10- S/F Rollers
JD350D: (36Lk) 10- S/F Rollers
JD400G: (36 LK) 10- S/F Rollers
JD400G-LT: (39 LK) 12- S/F Rollers
Component Parts for NonCounter Bored

VID40/36 Chain, 36L, Sealed, w/ Master Pin
VLSJD350DRY Link Segment
VID65 Sealed Track Pin
VID36 Sealed Bushing (O.D. 44.45mm)
VID61 Track Link, R.H.
VID62 Track Link, L.H.
VID246 Master Pin
VID247/36 Pin and Bushing Group, Master Pin Type, 36LKs (**For non-counter bored links only**)
Sealed Chains and Track Groups-Counter Bored
VID627/36 Chain, 36L, Sealed, w/ Master Pin (Bushing OD = 44.45 mm)(B.H.=1/2")
VID627/39 Chain, 39L, Sealed
Chain 39L Sealed, w// Master Pin (B
(Bushing
shing OD = 44
44.45 mm)(B.H.=1/2")
45 mm)(B H 1/2")
VID629/36/300 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 300mm Shoe
Your Track Groups
VLSJD35DDRY Link Segment
VID65 Sealed Track Pin
VID632 Sealed Bushing (O.D. 44.45mm)
VID631 Track Link, R.H.
VID630 Track Link, L.H.
VID246 Master Pin
VID636 Master Pin Complete
VID36 Master Bushing
VID634 Seal Washer
VID635/36 Pin and Bushing Group, Master Pin Type, 36LKs (**For counter bored links only**)
Track Hardware
Track Shoes
VID207/300 Shoe, 1 B 300mm
VID207/350 Shoe, 1 B 350mm
VID207/400 Shoe, 1 B 400mm
VID209/300 Shoe, 3 B 300mm
VID209/350 Shoe, 3 B 350mm
Page 352
Bottom Rollers (1/2" Mounting Hole)
VID508 Roller Assembly, SF (Reference AT174436)
Note: Use ID626 Roller Assembly
Bottom Rollers (9/16" Mounting Hole)
VID626 Roller Assembly, SF
VID626V Roller Assembly S.F. (Optional)
Carrier Rollers
VID257 Carrier Roller Assembly-JD350,350A,350B,350C (NOT FOR 350D or 400G Models)
VAT10032 Seal Group
VID645 AT167258 Carrier Roller Assembly-JD350D, JD400G
VAT42553 Seal Group
Front Idlers
VID254 Front Idler Group with Shaft (Only 350, 350B & 350C)
VID648 Front Idler With Brackets L.H. (Only 350D, 400G)
VID649 Front Idler With Brackets R.H. (Only 350D, 400G)
Sprockets
VID110 Sprocket (Reference T129879)
VID110V Sprocket (Optional)
N/A T19007 Sprocket (For 2010 Model Only)
Page 353
MODEL: John Deere 450, 450B, 450C, 450D, 450E, 450G,
455D, 455E, 455G, 550, 550A, 550B, 550G

OD = 51 mm
Serial Nos: 450:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
450: Loader (36LK) 10- S/F Rollers, 2-Carrier Rollers
450B:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
450B: Loader (37Lk) 10- S/F Rollers, 2-Carrier Rollers
450C:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
450C: Loader (37Lk) 10- S/F Rollers, 2-Carrier Rollers
450D:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
450E:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
450E-LT:Dozer (39 LK) 12- S/F Rollers, 2-Carrier Rollers
450G:Dozer (37 LK) 6- S/F Rollers, 4- D/F Rollers, 2-Carrier Rollers
450G-LT:Dozer (40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
455D: Loader (37 LK) 10- S/F Rollers, 2-Carrier Rollers
455E: Loader (37 LK) 10- S/F Rollers, 2-Carrier Rollers
455G: Loader (37 LK) 10- S/F Rollers, 2-Carrier Rollers
550:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
550A:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
550B:Dozer (36 LK) 10- S/F Rollers, 2-Carrier Rollers
550G:thru 771617 (39 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
550G: 771618-up (40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
555A: Loaders ((37 LK)) 10- S/F Rollers,, 2-Carrier Rollers
555B: Loaders (37 LK) 10- S/F Rollers, 2-Carrier Rollers

VID372/36 Chain, 36L, Sealed, w/ Master Pin (Bushing Diameter=54mm) (Bolt Hole =1/2")
VID372/37 Chain, 37L, Sealed, w/ Master Pin (Bushing Diameter=54mm) (Bolt Hole =1/2")
VID407/36/350 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 14" Shoe
Your Track Groups
VID406/36 Pin and Bushing Kit, 36L-Bushing Diameter 54mm
VID406/37 Pin and Bushing Kit, 37L-Bushing Diameter 54mm
VID400 Link R.H..
VID401 Link L.H..
VID404 Track Pin
VID402 Bushing
VID403 Sealed Master Bushing-Bushing OD = 2.125"
VID306 Seal Washer (450C, 550, 555)
When Selling Rails Only, Advise Customer That JD OEM Master Shoes Do NOT
interchange with All Makes Products, Must Use Regular Shoes with SML's in All
Makes Products
VID567/36 Chain, 36L, Sealed, w/ Master Pin (Bolt Hole =1/2") (Bushing Diameter= 51mm)
VID567/36V Chain, 36L, Sealed, w/ Master Pin (Bolt Hole =1/2") (Bushing Diameter= 51mm) (Optional)
Page 354
VID578/36400V Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe (Optional)
VID580/37/14 Track Group, 37L, Sealed, w/ Master Pin, w/ 2 B 14" Shoe * No Longer Available *
Your Track Groups
VLSJD45DRY2 Link Segment with 1/2" bolt Hole
VID569 Track Link, R.H. (1/2" Bolt Hole)
VID570 Track Link, L.H. (1/2" Bolt Hole)
VID573 Sealed Pin
VID571 Bushing
VID576 Seal Washer
VID577VT Master Pin Complete (For V-Track)
VID574 Sealed Master Pin
VID876 p
Spacer
VID568/37 Pin and Bushing Kit, 37L
Sealed & Lubricated Chains and Track Groups 1/2 Bolt Hole
Makes Products
VID595/36 Chain, 36L, SALT, w/ SML (Bolt Hole=1/2")
VID614/36/350 Track Group, 36L, SALT, w/ SML, w/ 1 B 14" Shoe
VID617/37/14 Track Group, 37L, SALT, w/ SML, w/ 2 B 14" Shoe * No Longer Available *
Your Track Groups
VID607 Master Link Complete, R.H. (2 pieces) (1/2" Bolt Hole)
VID608 Master Link Complete, L.H. (2 pieces) (1/2" Bolt Hole)
VID569 Track Link R.H..
VID570 Track Link L.H..
VID600 Salt Pin
VID601 Salt Bushing
VID599 Thrust Ring
Page 355
VID611/37 Pin & Bushing Kit, 37LK-SALT
VID613/37 Bushing Group, 37 L (OEM is 36 Bushings, All Makes=37 Bushings)
VID876 Spacer
Track Shoes (Bolt Hole = 1/2") **Heavy-Duty**
JD OEM Master Shoes Do NOT interchange with All Makes Products
Use Regular Shoes with SML's in All Makes Products
VID240/350 Shoe, 1 B 14"
VID240/400 Shoe, 1 B 16"
VID240/450 Shoe, 1 B 18"
VID240/600 Shoe, 1 B 24"
VID603/350 Shoe, 2 B 14" ** No Longer Available **
VID203/350 Shoe, 3 B 14" ** No Longer Available ** (Use ID784/14 - 9/16" Bolt Hole Shoe)
Track Hardware-1/2"
VD1545000N35 Master Bolt, Long 1/2" X 77mm (2-Needed) ** Sorefa Chains only
VID610 Master Bolt, Long, 1/2" (2 needed) 82 mm ** Berco and OEM Chains only
VID625 Master Bolt, Short, 1/2" (2 needed) 57 mm ** Will work for Berco, OEM, and Sorefa **
Sealed w/Master Pin Chains and Track Groups 9/16" Bolt
Hole
VID781/36 Chain, 36L, Sealed, w/ Master Pin (Bushing OD = 51 mm)(B.H.=9/16)
VID781/36V Chain, 36L, Sealed, w/ Master Pin (Bushing OD = 51 mm)(B.H.=9/16) (Optional)
VID781/40V Chain, 40L, Sealed, w/ Master Pin (Bushing OD = 51 mm)(B.H.=9/16)
mm)(B.H. 9/16) (Optional)
VID837/36/16 Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe (Bolt Hole = 9/16")
VID837/36/16V Track Group, 36L, Sealed, w/ Master Pin, w/ 1 B 16" Shoe (Bolt Hole = 9/16") (Optional)
Your Track Groups
Page 356
VID573 Sealed Pin
VID874 Sealed Bushing
VID576 Seal Washer
VID876 Spacer
VLSJD450DRY Link Segment with 9/16" bolt Hole
Lubricated Chains and Track Groups 9/16 Bolt Hole
Makes Products
VID782/36 Chain, 36L, SALT, w/ SML (Bushing OD = 51 mm)(Bolt Hole =9/16")
VID782/36V Chain, 36L, SALT, w/ SML (Bushing OD = 51 mm)(Bolt Hole =9/16") (Optional)
VID839/36/16 Track Group, 36L, SALT, w/ SML, w/ 1 B 16" Shoe (Bolt Hole = 9/16")
VID839/36/16V Track Group, 36L, SALT, w/ SML, w/ 1 B 16" Shoe (Bolt Hole = 9/16") (Optional)
VID839/37/16V p, 37L,, SALT,, w/ SML,, w/ 1 B 16" Shoe (Bolt
Track Group, ( Hole = 9/16")) (Optional)
( p )
VID851/37/14 Track Group, 37L, SALT, w/ SML, w/ 2 B 14" Shoe * No Longer Available *
Your Track Groups
VID879 Master Link Complete, R.H. (2 pieces) (9/16" Bolt Hole)
VID880 Master Link Complete, L.H. (2 pieces) (9/16" Bolt Hole)
VID600 Salt Pin
VID601 Salt Bushing
VID599 Thrust Ring
Page 357
VID613/37 Bushing Group, 37 L (OEM is 36 Bushings, All Makes=37 Bushings)
Lubricated Chains **Stepped Bushing**
Makes Products
VID1359/36/16 Track Group, 36L, SALT, w/ SML, (Step Bushing) w/ 1 B 16" Shoe
VID1359/3716V Track Group, 37L, SALT, w/ SML, (Step Bushing) w/ 1 B 16" Shoe (Optional)
VID1359/4024V p, 40L,, SALT,, w/ SML,, (Step
Track Group, ( p Bushing)
g) w/ 1 B 24" Shoe (Optional)
( p )
Your Track Groups
VID872 Link R.H.
VID873 Link L.H.
VID879 AT167327 Master Link R.H.. Complete
VID880 AT167329 Master Link L.H.. Complete
VID600 Salt Pin
VID1150 Salt Bushing-**Stepped Bushing**
VID599 Thrust Ring
VID1170/37 Pin & Bushing Kit, 37LK-SALT - Will not fit OEM and Berco chains
VID1170/40 Pin & Bushing Kit, 40LK-SALT - Will not fit OEM and Berco chains
VID783/16 Shoe, 1 B 16"
VID783/16V Shoe, 1 B 16" (Optional)
VID783/18 Shoe, 1 B 18"
VID783/24 Shoe, 1 B 24"
VID783/24M Shoe, 1 B 24" w/ Mud Hole
VID785/14 Shoe, 2 B 14" * No Longer Available *
VID784/14 Shoe, 3 B 14"
VID784/14NM Shoe, 3 B 14" w/o Mud Hole
Page 358
VID784/16 Shoe, 3 B 16"
Track Hardware-9/16"
V5A3187 Master Bolt (Long) 9/16" X 76mm (2 needed)
V616199C1 Master Bolt (Short) 9/16" X 54mm (2 needed) (Use for Short Bolt on V-Track Chain)
VVA551 Master Bolt (Long) 9/16" X 82.5mm Berco, OEM & V-Track Chain Only
VT126931 Master Bolt (Short) 9/16"X 46mm Berco & OEM Chain Only
Track Rollers
VID512V Roller Assembly (Optional)
VAT168419 Roller Assembly, DF
VID2184V Roller Assembly, DF (Optional)
V655973C91 Seal Group - For ITM Roller
VIN2438 Seal Group - For Berco Roller(OEM Seal NOT interchangeable w/ All Makes Seal)
Carrier Rollers
VID355 Carrier Roller (Oil Seal Required - Not Included w/ Roller) (Stand Type) **Not for 450**
VID355V Carrier Roller (Oil Seal Required - Not Included w/ Roller) (Stand Type) (Optional)
VAT42553 ID357 Seal Group-(Reference AT135802)
VID356 Carrier Roller Shell W/ bushings
VID356V Carrier Roller Shell W/ bushings (Optional)
VID355LTV Carrier Roller w/ Lifetime Seal (DOES NOT REQUIRE SEAL GROUP) (Stand Type)
VCR3002 Carrier Roller Note: (Fits with the bolt/clamp type roller stand)
NOTE: **Please verify which style roller stand before ordering carrier roller **
VCR3002V Carrier Roller Note: (Fits with the bolt type roller stand) (Optional)
V9W7216 Seal Group
Front Idlers
VID197 Now Obsolete - Use Below Idler(s)
VID536 Front Idler Complete
VID536V Front Idler (Optional)
VID455 Front Idler w/Shaft
Sprockets
VID655 T42835AM Sprocket
VT145700 Sprocket-For 54 mm Stepped Bushing Track Chain
Page 359
MODEL: John Deere 450H, 450H-LGP, 450J, 450JLT,
450J-LGP, 550H, 550J
Specs Pitch = 6.29", Link Ht = 90 mm, Bushing OD = 54 mm,
450H:(37LK) 6- S/F Rollers, 4- D/F Rollers, 2-Carrier Rollers
450H LGP: (40Lk) 12-S/F, 2-Carrier Rollers
450J: (37Lk) 12-S/F Rollers, 2-Carrier Rollers
450JLT: (37Lk) 12-S/F Rollers, 2-Carrier Rollers
450J LGP: (40Lk) 12-S/F Rollers, 2-Carrier Rollers
550H:(40LK) 12- S/F Rollers, 2-Carrier Rollers
550J: (40Lk) 12-S/F Rollers, 2-Carrier Rollers
Sealed w/Master Pin Chains and Track Groups

Your Track Groups
VID573 Sealed Pin
VID874 Sealed Bushing
VID576 Seal Washer
VID876 Spacer
VLSJD450DRY Link Segment with 9/16" bolt Hole
Page 360
Your Track Groups
VID872 Link R.H.
VID873 Link L.H.
VID879 AT167327 Master Link R.H.. Complete
VID880 AT167329 Master Link L.H.. Complete
VID600 Salt Pin
VID1150 T135646 Salt Bushing-**Stepped Bushing**
VID599 Thrust Ring
VID783/16 Shoe, 1 B 16"
VID783/18 Shoe, 1 B 18"
VID783/24 Shoe, 1 B 24"
VID783/24M Shoe, 1 B 24" w/ Mud Hole
VID783/36 Shoe, 1 B 36"
Track
T kH Hardware-9/16"
d 9/16"
V5A3187 Master Bolt, Long, 9/16" X 76mm (2 needed)
V616199C1 Master Bolt, Short, 9/16" X 54mm (2 needed)
VT126931 Master Bolt (Short) 9/16"X 46mm Berco & OEM Chain only
VVA551 Master Bolt (Long) 9/16" X 82.5mm Berco & OEM Chain only
Track Rollers
VAT168419 Roller Assembly, DF
VID2184V Roller Assembly, DF (Optional)
VIN2438 Seal Group - For Berco Roller (OEM Seal NOT interchangeable w/ All Makes Seal)
Carrier Rollers
VID355 Carrier Roller (Oil Seal Required - Not Included w/ Roller) (Press Fit Type) **Not for 450**
VID355V Carrier Roller (Oil Seal Required - Not Included w/ Roller) (Press Fit Type) (Optional)
VAT42553 ID357 Seal Group-(Reference AT135802)
VID356 Carrier Roller Shell W/ bushings
VID356V Carrier Roller Shell W/ bushings (Optional)
VID355LTV Carrier Roller w/ Lifetime Seal (DOES NOT REQUIRE SEAL GROUP) (Press Fit Type)
VCR3002 Carrier Roller Group - Serial Number 890118-up (Fits with the clamp/bolt type roller stand)
**Please verify which style roller stand before ordering carrier roller **
VCR3002V Carrier Roller (Fits with the bolt/clamp type roller stand) (Optional)
V9W7216 Seal Group
Front Idlers
VID1820V Idler Assembly (Cast)
Sprockets
VID655 T42835AM Sprocket
Page 361
VT145700 Sprocket-For 54 mm Stepped Bushing Track Chain
Page 362
MODEL: John Deere 555G, 650G, 650H, 650J,
605C Loader
Serial Nos: 555G:(36 LK) 6- S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
555G-WT:(36 LK) 6- S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650G:(38 LK) 6- S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650H:(38 LK) 6- S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650H-LT: (38Lk) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650H-XLT: (40LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650J: (38Lk) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
650J XLT: (40Lk) 8-S/F Roller, 6-D/F Roller, 2-Carrier Roller
605C Loader - *Confirm Number of Links & Quantity of Rollers*

VCR2849/36 Chain, 36L, Sealed, w/ Master Pin (Reference AT148580)
VCR2849/36V Chain, 36L, Sealed, w/ Master Pin (Reference AT148580) (Optional)
VCR2849/38V Chain, 38L, Sealed, w/ Master Pin (Reference AT148576) (Optional)
VCR2975/38/18 AT105166 Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 18" Shoe
VCR2975/3818V AT105166 Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 18" Shoe (Optional)
VCR2975/38/20 AT105166 p, 38L,, Sealed,, w/ Master Pin,, w/ 1 B 20" Shoe
Track Group,
VCR2975/3820V AT105166 Track Group, 38L, Sealed, w/ Master Pin, w/ 1 B 20" Shoe (Optional)
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 Spacer
VCR3679/38/16V Track Group, 38L, Sealed, w/ SML, w/ 1 B 16" Shoe (Optional)
Page 363
Your Track Groups
VCR3196 Sealed Pin
VCR2562 Seal Washer
VCR3197 Spacer
VCR3519/36 Chain, 36L, SALT, w/ SML (Reference AT148856)
VCR3519/36V Chain, 36L, SALT, w/ SML (Reference AT148856) (Optional)
VCR3519/38V Chain, 38L, SALT, w/ SML (Reference AT148857) (Optional)
Group, 36L
36L, SALT
SALT, w/ SML,
SML w/ 2 B 14
14" Shoe
Your Track Groups
VCR3573 Salt Pin
VCR3575 Thrust Ring
Proline Track Chain
VCR4329/38/16 Track Group, 38L, SALT, w/ SML, w/ 1 B 16" Shoe (Bushing Dia.= 57.2mm)
VCR4329/3816V Track Group, 38L, SALT, w/ SML, w/ 1 B 16" Shoe (Bushing Dia.= 57.2mm) (Optional)
Page 364
Your Track Groups
VCR3573 Salt Pin
VCR3575 Thrust Ring
Track Shoes
Note: Master Shoes for All Makes & JD OEM are NOT interchangeable.
and thus use the appropriate master shoe to match the mfg'er.
VCR3599/16 Shoe,
Shoe 1 B 16
16"
VCR3599/18 Shoe, 1 B 18"
VCR3599/20 Shoe, 1 B 20"
VCR3599/22 Shoe, 1 B 22"
VCR3599/24 Shoe, 1 B 24"
VID1739/700 T17832 Shoe, 1 B 28"
VID1739/700V T17832 Shoe, 1 B 28" (Optional)
VID1740/700 T17833 Shoe, Master, 1 B 28"
VID1740/700V T17833 Shoe, Master, 1 B 28" (Optional)
VCR3599/30 Shoe, 1 B 30"
VCR3601/14V Shoe, Master, 2 B 14" (5/8" Bolt Hole) (Optional)
Page 365
VCR3600/16V Shoe, 2 B 16" (5/8" Bolt Hole) (Optional)
VCR3600/18V Shoe, 2 B 18" (5/8" Bolt Hole) (Optional)
Track Hardware
V7H3597 Track Bolt, 5/8" (use for T121478)
Track Rollers
VID789 Roller Assembly, S/F
VID789V Roller Assembly, S/F (Optional)
VID800 Roller Assembly, D/F
VID800V Roller Assembly, D/F (Optional)
VIN2438 Seal - For Berco Roller (will not work with OEM rollers)
Carrier Rollers
VID790 Carrier Roller (Oil Seal Required - Not Included w/ Roller) (Press Fit Type)
VID790V Carrier Roller (Oil Seal Required - Not Inlcuded w/ Roller) (Press Fit Type) (Optional)
VAT42553 ID357 Seal Group - (Reference AT135802)
VID791 Carrier Roller Shell
VID790LTV Carrier Roller w/ Lifetime Seal (DOES NOT REQUIRE SEAL GROUP) (Press Fit Type)
VCR2880 Carrier Roller Assembly Note: (Fits with bolt/clamp type roller stand) (605C Loader)
VCR2880V Carrier Roller Assembly Note: (Fits with the bolt/clamp type roller stand) (Optional)
Idlers
VID1821V Idler Assembly (For JD 650H, 650J Models & JD 605C Loader) Cast
VID1560V Idler Assembly with counterweight (For JD 650G Models) Idler fits both left and right side.
Cast ** Do not use with LGP Machines with 26" or larger track shoe **
VID1561 Use ID1560X
VID1558V Idler Assembly Without Counterweight (For JD 555G, JD 650G & 650G-LGP With 26" or
Larger Track Shoe Models) Idler fits both left and right side. Cast
VID1559 Use ID1558X
Sprockets
VID792 Sprocket
Page 366
MODEL: John Deere 700H, LGP/XLT, 700J, LGP/XLT
Specs Pitch = 6.906", Link Ht = 103.2 mm, Bolt Diameter =
5/8"
Serial Nos: 700H-LT:(40 LK) 6-S/F, 6-D/F, 2-T/C
700H-LGP/XLT:(42 LK) 8-S/F, 6 D/F, 2-T/C
700J-LT: (40LK) 6-S/F, 6-D/F, 2-T/C (Ser # UP TO 141347)
700J-LGP: (42LK) 8-S/F, 6-D/F, 2-T/C (Ser # UP TO 141347)
700J-XLT: (42LK) 8-S/F, 6-D/F, 2-T/C (Ser # UP TO 141347)
700J-LT: (37LK) 6-S/F, 6-D/F, 2-T/C (Ser # 141348-UP)
(TLA is 7.48"Pitch - Use VCR5202/37 & VCR5513 Segment)
700J-LGP: (39LK) 8-S/F, 6-D/F, 2-T/C (Ser # 141348-UP)
(TLA is 7.48" Pitch - Use VCR5202/39 & VCR5513 Segment)

VCR4264/40 Chain, 40L, SALT, w/ SML (** Link Height 109 mm **)
VCR4264/40V Chain, 40L, SALT, w/ SML (** Link Height 109 mm **) (Optional)
** OEM Chain uses standard links with step bushings not available from ITM. **
Your Track Groups
VCR4264/4024V Track Group
Group, 40L
40L, SALT
SALT, w/ SML,
SML Proline Rail,
Rail w/ 1 B 24
24" Shoe (Optional)

Track Shoes
VCR3242/20 Shoe, 1 B 20"
VCR3242/22 Shoe, 1 B 22" (use for T60828)
VCR3242/22V Shoe, 1 B 22" (use for T60828) (Optional)
VCR3242/24 Shoe, 1 B 24 " (use for T106955)
VCR3242/24V Shoe, 1 B 24 " (use for T106955) (Optional)
Page 367
VCR3242/28 Shoe, 1 B 28"
VCR3242/30 Shoe, 1 B 30"
VCR3242/34 Shoe, 1 B 34"
Track Hardware
V7H3597 Track Shoe Bolt, 5/8" (use for T45096)
Bottom Rollers
VCR1292 Roller Assembly, S/F (use for AT76033)
VCR1293 Roller Assembly, D/F (use for AT76034)
VCR1276 Roller Shell, S/F (use for AT67570)
VCR1277 Roller Shell, D/F (use for AT67567)
V9W7216 Seal Group (use for AT67566)
V8S5796 Bushing (use for AT67571)
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
Pi
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
Carrier Rollers
VCR4799V Carrier Roller Assembly (Optional) (DO NOT USE KTSU V-Track w/ DEERE MACHINE -
Seal Retainer too large and will not fit into stand)
Sprockets
VID2162 Segment Group
VID2162V Segment Group (Optional)
Idlers
VID2164V Idler with Brackets
Page 368
MODEL: John Deere 655, 655B, 750, 750B
Serial Nos: 655:(40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
655B:(40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
750:(40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
750B:(40 LK) 6- S/F Rollers, 6- D/F Rollers, 2-Carrier Rollers
750BLT:(43 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
750B-LGP:(43 LK) or (46 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

Group, 43L
43L, Sealed
Pin, w/ 1 B 24"
24 Shoe
Your Track Groups
VCR255 Sealed Pin
VCR2166 Seal Washer
Sealed Chains W/SML and Track Groups
VCR3627/40 Chain, 40L, Sealed, w/ SML (Reference AT70797)
Page 369
Your Track Groups
VCR255 Sealed Pin
VCR2166 Seal Washer
VCR3596/40/18 Track Group, 40L, SALT, w/ SML, w/ 1 B 18" Shoe (Use CR4264/40/18 Proline)
Group, 40L
40L, SALT
SALT, w/ SML,
SML w/ 1 B 3434" Shoe (Use CR4264/40/34 Proline)
VCR3597/40/15 Track Group, 40L, SALT, w/ SML, w/ 2 B 15" Shoe, w/ Mud Hole
VCR4002/40/15 Track Group, 40L, SALT, w/ SML, w/ 2 B 15" Shoe (Use CR4393/40/15)
Your Track Groups
VCR3585 Salt Pin
VCR3587 Thrust Ring
Page 370
VCR4393/40/15 Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 2 B 15" Shoe, W/O Mud Hole
VCR4393/4015V Track Group, 40L, SALT, w/ SML, Proline Rail, w/ 2 B 15" Shoe, W/O Mud Hole (Optional)

Your Track Groups
V8E2027TH Extended Wear Roller Assembly, S/F

V9W9353TH Extended Wear Roller Shell, S/F
V8E2026TH Extended Wear Roller Assembly, D/F
V9W8350TH Extended Wear Roller Shell, D/F
Track Shoes
and thus use the appropriate master shoe to match the mfg'er.
VCR3242/16 Shoe, 1 B 16"
VCR3242/20 Shoe, 1 B 20"
VCR3242/24 Shoe, 1 B 24 " (use for T106955)
VCR3242/24V Shoe, 1 B 24 " (use for T106955) (Optional)
VCR3242/30 Shoe, 1 B 30"
VCR3242/34 Shoe, 1 B 34"
Page 371
VCR3242/34V Shoe 1B 34" (Optional)
VCR3305/15 Shoe, 2,B 15" w/ Mud Hole
VCR3726/14 Shoe, 2 B 14"
VCR3726/18 Shoe, 2 B 18"
VCR3726/20 Shoe, 2 B 20"
VCR3726/22 Shoe, 2 B 22"
VCR3229/14V Shoe, 3 B 14" w/ Mud Hole (Optional)
VCR3229/15 Shoe, 3 B 15" w/ Mud Hole (use for T45100)
VCR3229/15V Shoe, 3 B 15" w/ Mud Hole (use for T45100) (Optional)
Track Hardware
V7H3597 Track Shoe Bolt, 5/8" (use for T45096)
Bottom Rollers
VCR1292 118-1611 Roller Assembly, S/F (use for AT76033)
VCR1293 118-1612 Roller Assembly, D/F (use for AT76034)
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
V0S1601 Roller Mounting Bolt (70mm long)
V4D3704 Washer (Flat)
Carrier Rollers
VID532 Carrier Roller Assembly (oil seal separate)
Idlers
VID1453V Idler With Brackets (Use 750C Mounting Bolts)
Page 372
VID526K Conversion Kit (Use Only For Converting VID526 or VID526V into VID1453V)
VID526 Front Idler Less Brackets
VID526V Front Idler Less Brackets (Optional)
VCR3169 Idler Shell (use for T47854 )
V9W7216 Seal Group
V8S5796 Bushing
Sprockets
VID522 Sprocket-Bolt on (use for T78651 as well)
Page 373
MODEL: John Deere 655C
Specs Pitch = 6.906", Link Ht = 109 mm, Bushing OD = 62.4
*OEM Chains use standard links(Ht.= 4.062")*
655C:(42LK) (6) S/F Roller, (6) D/F Roller, (2) T/C Roller

Sorefa Only
VCR4264/42 Chain, 42L, SALT, w/ SML, Proline
VCR4264/42V Chain, 42L, SALT, w/ SML, Proline (Optional)
Your Track Groups
Track Hardware
V7H3597 Track Bolt - 5/8 x 2 1/8
V1M1408 Track Nut - 5/8
V3P2274 Master Bolt - 5/8
Bottom Rollers
VCR1292 Roller Assembly S.F. (Qty needed 8)
VCR1293 Roller Assembly D.F. (Qty needed 4)
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
Carrier Rollers
VCR2881 Carrier Rollers (Qty needed 2)
VCR2881V Carrier Rollers (Qty needed 2) (Optional)
Idlers
VCR3189 Idler Group (Qty needed 2)
VCR3189V Idler Group (Qty needed 2) (Optional)
VCR3169 Idler Shell
Page 374
VCR2096 Idler Shaft
V9W7216 Seal Group
V8S5796 Bushing
Sprockets
VCR4408 Segment Group (9-Pc) (Qty needed 2)
VCR4408V Segment Group (9-Pc) (Qty needed 2) (Optional)
V6V0937 Sprocket Bolt (27 pieces)
V7H3607 Sprocket Nut (27 Pieces)
Page 375
MODEL: John Deere 750C-OEM and Sorefa Component
Parts are not interchangeable
750C:(40 LK) 8- S/F Rollers, 6- D/F Rollers, 4-Carrier Rollers

750C-LGP:(42 LK) 8- S/F Rollers, 6- D/F Rollers, 4-Carrier Rollers

ITM Only
VCR5232/40/20 Track Group, 40L, SALT, w /SML, w/ 1 B 20" Shoe
Your Track Groups
VCR4808/37 Bushing & Seal Group, 37 LK
VCR4382 Track Link, R.H. **For Sorefa Track Chain Only**
VCR4383 Track Link, L.H. **For Sorefa Track Chain Only**
VCR3585 Salt Pin
VCR4389 Thrust Ring **For Sorefa Track Chain Only**
VCR4390 Seal Assembly **For Sorefa Track Chain Only**
Track Hardware
V9G3110 Track Shoe Bolt, 5/8"
V3T8601 Master Link Bolt -Short (2 each)
V3T8580 Master Link Bolt -Long (2 each)
Track Shoes
VCR4392/18 Shoe, 1 B 18"
VCR4392/20 Shoe, 1 B 20"
VCR4392/22 Shoe, 1 B 22"
VCR4392/24 Shoe, 1 B 24"
Page 376
VCR4392/28 Shoe, 1 B 28"
VCR4392/34 Shoe, 1 B 34"
Note: No master shoes required on 750C track groups
Bottom Rollers
VCR1292 Roller Assembly, S/F (use for AT76033)
VCR1293 Roller Assembly, D/F (use for AT76034)
V8S9092 Roller Bolt - 5/8 x 2 1/4"
V5P8247 Roller Hard Washer - 5/8"
V8T0357 750C (S/N up to 85107) Roller Mounting Bolt - M16 x 70mm
V6V5686 750C (S/N 85108 and up) Roller Mounting Bolt - M16 x 50mm * Note: Counterbored holes in
track frame - Third roller only use V8T0357
Carrier Rollers
Seal Retainer too large and will not fit into stand)
VCR2881 Carrier Roller Assembly (For Serial # Prior to 824299)
VCR2881V Carrier Roller Assembly (For Serial # Prior to 824299) (Optional)
V9W6647 Seal Group
Idlers
VID1453V Idler With Brackets
VID526K Conversion Kit (Use Only For Converting VID526 or VID526V into VID1453V)
VID526 Idler Group Less Brackets
VID526V Idler Group (Optional)
Sprockets
VID1452 Segment Group (Can use V750CHDSEGR Heavy Duty Segment)
VID1452V Segment Group (Can use V750CHDSEGR Heavy Duty Segment) (Optional)
Page 377
MODEL: John Deere 750C-, 750J/WT, LT, LGP**HEAVY
DUTY** OEM and Sorefa Component Parts are
not interchangeable
750C:(40 LK) Will not work with Rock Guards 8- S/F Rollers, 6- D/F
750CLGP:(42 LK) Will not work with Rock Guards 8- S/F Rollers, 6- D/F
*D5H Heavy-duty Track Chain with 750C Drilled Bolt Hole Pattern
750J-WT: (40Lk)
750J-LT: (45Lk) 10-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
750J-LGP: (45Lk) 10-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
Lubricated Chains-**Heavy-Duty**
V1102976 Chain, 40L, SALT, w/ SML - HD (JD750CHD *See Marketing Bulletin)
V1102976V Chain, 40L, SALT, w/ SML - HD (JD750CHD *See Marketing Bulletin) (Optional)
VCR5465/43 Chain, 43L, SALT, w/ SML - HD
VCR5465/43V Chain, 43L, SALT, w/ SML - HD (Optional)
*See D5H Heavy Duty **Call ValuePart to Customize
Your Track Groups
VCR5508/39
VCR 08/39 Bushing
B hi and dSSeall Ki
Kit, 39LK
VCR5465V VLSD5HHDV Link Segment (V-Track)
VCR5442 Salt Pin
VCR5446 Thrust Ring
VCR5447 Seal Assembly (Sorefa Type)
Track Hardware
V1070719 Master Link Bolt - Short (2 each)
V1061642 Master Link Bolt - Long (2 each)
Track Shoes (3/4" Bolt Hole)
VCR5450/20 Shoe, 1 B 20"
VCR5450/22 Shoe, 1 B 22"
VCR5450/24 Shoe, 1 B 24"
Page 378
VCR5450/28 Shoe, 1 B 28"
VCR5450/34 Shoe, 1 B 34"
V8T0357 750C (S/N up to 85107) Roller Mounting Bolt - M16 x 70mm
V6V5686 750C (S/N 85108 and up) Roller Mounting Bolt - M16 x 50mm * Note: Counterbored holes in
track frame - Third roller only use V8T0357
V6V3303 750J Roller Mounting Bolt - M16 X 60mm
V5P8247 Roller Hard Washer - 5/8"
Carrier Rollers
N/A Carrier Roller (Not Available - Must Use OEM)
N/A Carrier Roller (Optional) (Not Available - Must Use OEM)
VCR2881 Carrier Roller Assembly (For Serial # Up to 824299)
VCR2881V Carrier Roller Assembly (For Serial # Up to 824299) (Optional)
V9W6647 Seal Group
Idlers
VAT304377V Idler Group
Sprockets
V750CHDSEGR Segment Group-*Use with Heavy-Duty Track Chain Only* (Not for the 750J Models)
VID1452 Segment Group - 750J models
VID1452V Segment Group - 750J models (Optional)
Page 379
MODEL: John Deere 755A, 755B, 850, 850 LGP, 850B,
850B LGP
Serial Nos: 755A:(36 LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
755B:(36 LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
850:(37 LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
850LGP:(43 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
850B:(37 LK) 6-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
850B-LGP:(43 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
850B-LT:(40 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

VCR3176/36 Chain, 36L, Sealed, w/ Master Pin (Bush. OD = 66.67 mm)(Ref. AT64400)
VCR3176/37 Chain, 37L, Sealed, w/ Master Pin (Bush. OD = 66.67 mm) 850B
VCR3176/39 Chain, 39L, Sealed, w/ Master Pin (Bush. OD = 66.67 mm) 850B
VCR3176/40 Chain, 40L, Sealed, w/ Master Pin (Bushing OD = 66.67 mm) 850B LT
VCR3176/43 Chain, 43L, Sealed, w/ Master Pin (Bushing OD = 66.67 mm) 850 LGP, 850B LGP
Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed Chains W/SML and Track Groups
VCR3307/36 AT3P1088 Chain, 36L, Sealed, w/ SML (Bushing OD = 66.67 mm)
VCR3307/36V AT3P1088 Chain, 36L, Sealed, w/ SML (Bushing OD = 66.67 mm) (Optional)
VCR3307/37 Chain, 37L, Sealed, w/ SML (Bushing OD = 66.67 mm) 850B
VCR3307/39 Chain, 39L, Sealed, w/ SML (Bushing OD = 66.67 mm) 850B
VCR3307/40 Chain, 40L, Sealed, w/ SML (Bushing OD = 66.67 mm) 850B LT
VCR3307/43 Chain, 43L, Sealed, w/ SML (Bushing OD = 66.67 mm) 850 LGP, 850B LGP
VCR3307/43V Chain, 43L, Sealed, w/ SML (Bushing OD = 66.67 mm) 850 LGP, 850B LGP (Optional)
Page 380
Your Track Groups
VCR3697/37/20 Track Group, 37L, Sealed, w/,SML, w/ 1 B 20" Shoe ESS
Your Track Groups
VCR1790/36 Pin and Bushing Group, 36 LK for Master Pin type
VCR3312/36 Pin & Bushing Group 36LK for SML type
VCR3317 p
Master Link Complete, , R.H. ((2 p
pieces))
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR3309/36 Chain, 36L, SALT, w/ SML (Bushing OD = 69.8 mm) (Ref. AT70783)
VCR3309/36V Chain, 36L, SALT, w/ SML (Bushing OD = 69.8 mm) (Ref. AT70783) (Optional)
VCR3309/37 Chain, 37L, SALT, w/ SML (Bushing OD = 69.8 mm) (Ref. AT70785)
VCR3309/40 Chain, 40L, SALT, w/ SML (Bushing OD = 69.8 mm)
VCR3309/43 Chain, 43L, SALT, w/ SML (Bushing OD = 69.8 mm)
Page 381
VCR3327/36/17 Track Group, 36L, SALT, w/ SML, w/ 2 B 17" Shoe (Ref. AT1V8054)
Your Track Groups
VCR3319 Salt Pin
VCR3321 Ring
VCR4267/36 Chain, 36L, SALT, w/ SML Note: Bushing Diameter 72.7mm
VCR4267/36V Chain, 36L, SALT, w/ SML Note: Bushing Diameter 72.7mm (Optional)
VCR4267/41V Chain, 41L, SALT
Chain 41L SALT, w/ SML Note: Bushing Diameter 72.7mm
72 7mm (Optional)
VCR4415/36/17 Track Group, 36L, SALT, w/ SML, w/ 2 B 17" Shoe, EWL Rail
VCR4415/3617V Track Group, 36L, SALT, w/ SML, w/ 2 B 17" Shoe, EWL Rail (Optional)
VCR4417/37/24 Track Group, 37L, SALT, w/ SML, w/ 1 B 24" Shoe ESS, EWL Rail
VCR4417/4022V Track Group, 40L, SALT, w/ SML, w/ 1 B 22" Shoe ESS, EWL Rail (Optional)
Your Track Groups
Chains)
Page 382
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
and thus use the appropriate master to shoe to match the mfg'er.
VCR2084/18 Shoe, 1 B 18"
VCR2084/20 Shoe, 1 B 20"
VCR3323/22V Shoe,
Sh Master,
M t 1 B 22" (O (Optional)
ti l)
VCR2084/26 Shoe, 1 B 26"
VCR2084/28 Shoe, 1 B 28"
VCR2084/30 Shoe, 1 B 30"
VCR2084/36 Shoe, 1 B 36"
VCR3694/22 Shoe, 1 B 22" ESS
VCR3694/24 Shoe, 1 B 24" ESS (Reference 7S9562)
VCR3694/24V Shoe, 1 B 24" ESS (Reference 7S9562) (Optional)
VCR3694/26 Shoe, 1 B 26" ESS
VCR3694/30 Shoe, 1 B 30" ESS
Page 383
VCR3694/36 Shoe, 1 B 36" ESS
VCR3324/18 Shoe, 2 B 18"
VCR3324/20 Shoe, 2 B 20"
VCR3324/22 Shoe, 2 B 22"
VCR2298/18 Shoe, 3 B 18"
Bottom Rollers
V9W6647 Seal Group
VCR1804 End Collar-Inner
VCR1805 End Collar-Outer
VCR399 End Collar Lock
VCR1656 Key
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V1A8537 Roller Mounting Bolt (5/8 x 2 3/4)
V5P8247 Flat Washer (5/8)
V5M4443 Snap Ring
Carrier Rollers
VID534 Carrier Roller Assembly (Less oil Seal)
Idlers
VID1463V Idler Group with Brackets (Use 850C Mounting Bolts) (Do not use on 755 Models)
VCR1833 Front Idler Group less brackets
VCR1833V Front Idler Group less brackets (Optional)
VCR1834 Idler Shell (use for AT51400)
V9W6647 Seal Group
V8S5349 Bushing
Sprockets
VID528 Sprocket-Bolt on (use for T78649) (850B-27 teeth)
VID616 Sprocket -Bolt on (use for T78652) (755B-25 teeth) 16-Bolt Hole
V1A8063 Bolt 3/4 X 2.1/2 (16-Required)
Page 384
Specs Pitch = 7.984", Link Ht = 128mm, Bushing Diameter =
Serial Nos: 755C:(39LK) (6) S/F Roller, (6) D/F Roller, (2) T/C Roller

Your Track Groups
VCR3319 Salt Pin
VCR3321 Ring
Call ValuePart to Customize
**Call
Your Track Groups
Chains)
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
VCR3324/20 Shoe, 2 B 20"
VCR3324/22 Shoe, 2 B 22"
Bottom Rollers
Page 385
V9W6647 Seal Group
VCR1656 Key
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V1A8537 Roller Mounting Bolt (5/8 x 2 3/4)
V5P8247 Flat Washer (5/8)
V5M4443 Snap Ring
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR1833 Idler W/Shaft
VCR1833V Idler W/Shaft (Optional)
V9W6647 Seal Group
Sprockets
VCR3330 Segment Group(25 Teeth) (5 pieces)
VCR3330V Segment Group(25 Teeth) (5 pieces) (Optional)
V3S8182 Segment Bolt (5/8 x 47.6) OEM is 49mm
V7H3607 Segment Nut 5/8"
Page 386
MODEL: John Deere 850C, 850C-LGP
Specs Pitch = 7.984", Link Ht = 128mm, Bushing Diameter =
Serial Nos: 850C:(40 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
850C-LGP:(43 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

VCR3310/40/24 Not Available: USE VCR4416/40/24
Your Track Groups
VCR3318 p
Master Link Complete,, L.H. (2
( pieces)
p )
VCR3319 Salt Pin
VCR3321 Ring
Your Track Groups
Chains)
Page 387
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
and thus use the appropriate master to shoe to match the mfg'er.
VCR2084/18 Shoe, 1 B 18"
VCR2084/20 Shoe, 1 B 20"
VCR2084/26 Shoe, 1 B 26"
VCR3323/26 Shoe,
Sh Master,
M t 1 B 26"
VCR2084/28 Shoe, 1 B 28"
VCR2084/30 Shoe, 1 B 30"
VCR2084/36 Shoe, 1 B 36"
VCR3694/22 Shoe, 1 B 22" ESS
VCR3694/24 Shoe, 1 B 24" ESS (Reference 7S9562)
VCR3694/24V Shoe, 1 B 24" ESS (Reference 7S9562) (Optional)
VCR3324/17 Shoe, 2 B 17"(use for T67608)
VCR3324/18 Shoe, 2 B 18"
VCR3324/22 Shoe, 2 B 22"
Page 388
VCR2298/18 Shoe, 3 B 18"
Bottom Rollers
V9W6647 Seal Group
VCR3636 Shaft
V8S5349 Bushing
VCR1656 Key
VCR3631 End Collar-Inner (3/4" bracket bolt hole)
VCR3632 End Collar-Outer (3/4" bracket bolt hole)
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V2S0115 Flat Washer
V5M4443 Snap Ring
V6V5845 850C (S/N up to
t 846928) RRoller
ll MMounting
ti Bolt
B lt - M20 x 70
70mm
V8T0360 850C (S/N 846929 and up) Roller Mounting Bolt - M20 x 90mm (Note: counterbored holes)
V6V9667 850C (S/N 851058 and up) Roller Mounting Bolt - M20 x 100mm (Note: Third roller on STD)
V8T3282 Roller Mounting Hard Washer - 20mm
Carrier Rollers
VCR2650 Carrier Roller Assembly (4 Required, For Serial # Prior to 824299)
VCR2650V Carrier Roller Assembly (4 Required, For Serial # Prior to 824299)(Optional)
VCR4800 Carrier Roller Assembly (4 Required, For Serial # 824299- Up)
Seal Retainer too large and will not fit into stand) (4 Required-For Serial # 824299- Up)
V9W6647 Seal Group
Idlers
VID1463V Idler Group with Brackets
VCR1833 Idler W/Shaft
VCR1833V Idler W/Shaft (Optional)
V9W6647 Seal Group
Sprockets
VID1462 Segment Group
VID1462V Segment Group (Optional)
Page 389
MODEL: John Deere 850J, 850J-WT, 850J-LT, 850J-WLT,
850J-LGP
Specs Pitch = 8.00", Link Ht.= 132mm, Bushing Diameter=
72.9mm Bolt Diameter = 3/4"
Serial Nos:
850J-WT: (40Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
850J-LT: (45Lk) 8-S/F Rollers, 8-D/F, 4-Carrier Rollers
850J-WLT: (45Lk) 8-S/F Rollers, 8-D/F, 4-Carrier Rollers
850J-LGP: (45Lk) 8-S/F Rollers, 8-D/F, 4-Carrier Rollers

V6I9670 AT307136 Chain, 40L, SALT, Heavy Duty, w/ SML
V6I9670V AT307136 Chain, 40L, SALT, Heavy Duty, w/ SML (Optional)
V8E9037 AT307137 Chain, 45L, SALT, Heavy Duty, w/ SML
V8E9037V AT307137 Chain, 45L, SALT, Heavy Duty, w/ SML (Optional)
V6I9647 Track Group, 40L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 22" Shoe (D6H XR)
VCR5551/40/20 Track Group, 40L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 20" Shoe ESS
VCR5551/4536V Track Group, 45L, SALT, Heavy Duty Rail, w/ SML, w/ 1 B 36" Shoe ESS (Optional)
Your Track Groups
VCR5544/39 Bushing & Seal Kit, 39L *** Not Interchangeable with OEM & V-Track Chains ***
VCR5547/39 Pin and Bushing Group, 39L *** For OEM Chains Only ***
VCR5545/39 Bushing Group, 39L *** For OEM Chains Only ***
VCR5534V Link Segment for V-Track Chain
VCR5608 Master Link Complete, R/H
VCR5609 Master Link Complete, L/H
V8E7407 Master Link Pin End R/H
V8E7408 Master Link Pin End L/H
VCR5541 Salt Pin
V8E7222 Salt Bushing *** For OEM Chains Only ***
VCR4438 Thrust Ring
Track Hardware
Track Shoes
VCR4442/18 Shoe, 1 B 18"
Page 390
VCR4442/20 Shoe, 1 B 20"
VCR4442/22 Shoe, 1 B 22"
VCR4442/24 Shoe, 1 B 24"
VCR4442/26 Shoe, 1 B 26"
VCR3323/26 Shoe, Master, 1 B 246
VCR4442/28 Shoe, 1 B 28"
VCR4442/30 Shoe, 1 B 30"
VCR4442/36 Shoe, 1 B 36"
VCR4443/18 Shoe, 1 B 18" ESS
VCR4443/20 Shoe, 1 B 20" ESS
VCR4443/20V Shoe,, 1 B 20" ESS (Optional)
( p )
VCR4443/22 Shoe, 1 B 22" ESS
VCR4443/24 Shoe, 1 B 24" ESS
VCR4443/26 Shoe, 1 B 26" ESS
VCR4443/30 Shoe, 1,B 30" ESS
VCR4443/36 Shoe, 1 B 36" ESS
VCR3695/36V Shoe, Master, 1,B 36" ESS (Optional)
V1Q4973 Shoe, 1 B 30" ESS w/ Mud Hole
V1Q4607 Shoe, Master, 1 B 30" ESS w/ Mud Hole
V1Q4728 Shoe, 1 B 36" ESS w/ Mud Hole
V1Q4729 Shoe, Master, 1 B 36" ESS w/ Mud Hole
V8T3282 Roller Mounting Hard Washer - 20mm
Page 391
Extended Wear Life - Bottom Roller
OEM ONLY AT322779 Roller Assembly S/F (Larger Shell Diameter, 20mm Mounting Bolt Hole)
V8E2025TH 118-1635 Extended Wear Life Roller Assembly, S/F 3/4 (19mm) Bolt Hole (Optional for Above)
OEM ONLY AT322778 Roller Assembly D/F (Larger Shell Diameter, 20mm Mounting Bolt Hole)
V8E2024TH 118-1634 Extended Wear Life Roller Assembly, D/F 3/4 (19mm) Bolt Hole (Optional for Above)
Carrier Rollers
N/A Carrier Roller (Not Available - Must Use OEM)
N/A Carrier Roller (Optional) (Not Available - Must Use OEM)
Idlers
VID2687V AT305808 Idler Group
Sprockets
ID1462V T213406 Segment Group
Page 392
MODEL: John Deere 855
Specs Pitch = 8.5", Link Ht = 126 mm, Bushing Diameter =
Serial Nos: 855:(39LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

Your Track Groups
VCR2572 Link L.H.
VCR2573 Link R.H.
VCR1538 Pin
VCR1539 Bushing
VCR1541 Seal Washer
VCR1537 Master Pin
VCR1540 Spacer
Track Shoes
VCR3036/18 Track Shoe, 3 B 18"
Track Hardware
V7H3598 Track Bolt 3/4X2
3/4X2.3/8
3/8"
Bottom Rollers
VCR1652A1 Roller Assembly S/F 3/4" Bolt Hole
VCR1652A1V Roller Assembly S/F 3/4" Bolt Hole (Optional)
VCR1652A2 Roller Assembly D/F 3/4" Bolt Hole
VCR1652A2V Roller Assembly D/F 3/4" Bolt Hole (Optional)
V9W6647 Seal Group
V8S2539 Bushing
VCR2612 Key
VCR1654 Collar, Inner
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V8F6711 Gasket
V3B4512 Lock Washer
V2S0115 Flat Washer
Carrier Rollers
VID562 Carrier Rollers** Currently Not Available**
Idlers
VID564 Front Idler Group Less Brackets
Sprockets
VID529 Sprocket (25-Teeth)
Page 393
Serial Nos: 950C:(40LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
950C-LGP:(43LK) 8-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers

VCR4700/40 AT278873 Chain, 40L, SALT, w/ SML (Bolt Diameter 7/8")
VCR4700/43 AT278874 Chain, 43L, SALT, w/ SML (Bolt Diameter 7/8")
Your Track Groups
VCR4782 AT279196 Split Link Master Complete L.H..
VCR4781 AT279195 Split Link Master Complete R.H..
VCR4787 AT278865 Track Link R.H..
VCR4788 AT278866 Track Link L.H..
VCR5939 T189531 Track Bushing
VCR3114 T189365 Track Pin
VCR3215 T189370 Thrust Ring
VCR3191 Plug With Stopper
Track Hardware
V7H3599 Track Bolt 7/8 X 2.23/32"
V7T9825 Track Nut 7/8"
V9W9058 Master Bolt (4- Required)
Track Shoes
VFT1461/24 Shoe,
Sh 1 B 24" ESS (NOTE:
(NOTE MUST Ream
R from
f 20mm
20 to
t 23mm)
23 )
VFT1461/26 Shoe, 1 B 26" ESS (NOTE: MUST Ream from 20mm to 23mm)
VFT1461/36M Shoe, 1 B 36" ESS (NOTE: MUST Ream from 20mm to 23mm)
Bottom Rollers
V9W6647 Seal Group
V8S2539 Bushing
VCR2609 Shaft
VCR2612 Key
V2H3928 Gasket
V9B2289 Pin
V2P0347 Gasket
V8F6711 Seal
V1S8947 Gasket
Carrier Rollers
VCR2876 AT278798 Carrier Roller Assembly
VCR2876V AT278798 Carrier Roller Assembly (Optional)
V9W6647 Seal Group
Sprockets
Page 394
VCR3148 AT278802 Segment Group (5 pieces 25 teeth)
VCR3148V AT278802 Segment Group (5 pieces 25 teeth) (Optional)
Page 395
Serial Nos: 1050C:(44LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
SALT Chains and Track Groups

VCR4525/44 AT276952 Chain, 44L, SALT, w/ SML (D8R TLA sub for OEM version LH1427/44)
VCR4525/44V AT276952 Chain, 44L, SALT, w/ SML (D8R TLA sub for OEM version LH1427/44) (Optional)
Your Track Groups
VCR4053/45 Pin and Bushing Group, 45LK (Not Interchangeable with OEM Chains)
VCR4126 Salt Pin
VCR4127 Master Pin
VCR4130 Thrust Ring
Track Hardware
V6V1723 Track Bolt (7/8"
(7/8 x 3 3/8")
3/8 )
V7G6442 Track Nut
Track Shoes
VCR4227/22 AT276951 Shoe, 1 B 22" ESS
VCR4227/24 AT263489 Shoe, 1 B 24" ESS
VCR4227/26 AT305555 Shoe, 1 B 26" ESS
VCR4227/28 AT263488 Shoe, 1 B 28" ESS
VCR4227/30 Shoe, 1 B 30" ESS
VCR4227/36 Shoe, 1 B 36" ESS
Bottom Rollers
VLH1086V AT302636 Roller Assembly, SF - Note: DO NOT USE VCR4528 or VCR4528V - WILL NOT WORK!
1050C uses a "Non Bogey" type roller frame - all rollers MUST HAVE same diameter.
VCR4529 Roller Assembly, DF

V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 Bolt
Carrier Rollers
VLH1292 AT276958 Carrier Roller Assembly
V9W7220 Seal Group
Page 396
MODEL: John Deere CT322
V50233V T208348 Rubber Track
Page 397
M0DEL: John Deere CT332
V50237V T208350 Rubber Track 320mm
V52456V T208351 Rubber Track 450mm
Page 398
MODEL: John Deere JD17D
Page 399
MODEL: John Deere JD27C, JD27ZTS
Page 400
Page 401
MODEL: John Deere JD35C, JD35D, JD35ZTZ
Page 402
Page 403
MODEL: John Deere JD50ZTS
Page 404
MODEL: John Deere 70, 70D
O.D. =46.2mm & 14mm Bolt Diameter
Serial Nos: 70: (37Lk) 10-Bottom Rollers, 2-Carrier Rollers
70D: (37Lk) 10-Bottom Rollers, 2-Carrier Rollers
Sealed & Greased Chains and Track Group

VAT134372HD Chain, 37L, Sealed and Greased, w/ Master Pin
VAT134371 Track Group, 37L, Sealed & Greased, w/ Master Pin, w/ 3 B 450mm Shoe
Your Track Groups
VAT134374HD LINK L.H..
VAT134373HD LINK R.H..
VAT170089HD PIN & BUSHING GRP.
LINK, MASTER L.H..
LINK, MASTER R.H..
VTH106074HD PIN
MASTER PIN GRP.
VAT134376HD PIN, MASTER
VAT167074HD SEAL
VAT134377HD SPACER (MASTER SEAL ONLY FOR TYPE 4)
SNAP RING ( OR COTTER PINS)
VAT134379HD BUSHING
VAT134380HD BUSHING, MASTER
Track Hardware
Track Shoes
V2037593 Shoe, 3 B 450mm
Bottom Rollers
VTH106259V Roller Assembly
Carrier Rollers
9046571 Carrier Roller (JD70 Model Only)
VTH110962V Carrier Rollers (JD 70D Model Only)
Idlers
V9160965V AT170013 Idler with Bracket
Sprockets
VTH110360V Sprockets (12-Bolt Hole, * For 70D Models Only *)
TH105865 Sprocket (For JD 70 Only) Currently Not Available
Page 405
MODEL: John Deere 80
Serial Nos: 80:(38LK) 10-Bottom Rollers, 2-Carrier Rollers
Sealed & Greased Chains and Track Group

Your Track Groups
Track Shoes
VAT183364 Track Shoe, 3 B 600mm
Track Hardware
V4378884 Track Bolt 14mm X 39mm
V110.32.11420 Track Nut 14mm
Bottom Rollers
VAP34339 Roller Assembly
VAP34339V Roller Assembly (Optional)
Carrier Rollers
VAP34340 Carrier Rollers
VAP34340V Carrier Rollers (Optional)
Idlers
VAT183365 Idler W/blocks
VAT183365V Idler W/blocks (Optional)
Sprockets
VAT183370 Sprockets
Page 406
MODEL: John Deere 110, 120, 120C
Serial Nos: JD110: (41LK) 12- Bottom Rollers, 2- Carrier Rollers
JD120: (44LK) 14-Bottom Rollers, 2- Carrier Rollers
JD120C: (44LK) 14-Bottom Rollers, 2- Carrier Rollers

Your Track Groups
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Track Hardware
Track Shoes
Page 407
Bottom Rollers
VAT166891 Roller Assembly, S/F
VAT166891V Roller Assembly, S/F(Optional)
Carrier Rollers
VAT154514 Carrier Roller
VAP34654V Carrier Roller (Optional)
VAT167822 Bushing
VTH100452 Seal Group
Idlers
VAT180421 AT172696 Idler with Bracket
VAT180421V Idler with Bracket (Optional)
V9144654 Track Adjuster Spring Assembly (For 110 Model) **Note: Individual Parts Are Not
Interchangeable. Use Complete Unit Only
V9144656 Track Adjuster Spring Assembly (For 120 Model) **Note: Individual Parts Are Not
Sprockets
VFT3056 Sprocket-Bolt On-(21 Teeth)
VFT3056V Sprocket-Bolt On-(21 Teeth) (Optional)
Page 408
MODEL: John Deere 190E
Serial Nos: 190E: (37LK) 10-Bottom Rollers, 2-Carrier Rollers

VAT134372HD Chain, 37L, Sealed and Greased, w/ Master Pin
Your Track Groups
Track Hardware
Track Shoes
V2037593 Shoe, 3 B 450mm
V2030532 Shoe, 3 B 600mm
Bottom Rollers
VAT200693 Roller Assembly, S/F (Inside Flange)
VAT200693V Roller Assembly, S/F (Inside Flange) (Optional)
VTH106259V Roller Assembly, S/F (Outside Flange)
Carrier Rollers
VTH110962V Carrier Rollers
Idlers
V9097575V Idler With Brackets
Sprockets
VAT200345V Sprockets (12-Bolt Hole)
Page 409
MODEL: John Deere 290D
Serial Nos: 290D: Up to 001352 (43LK) 12-Bottom Rollers, 2-Carrier Rollers
290D: 001353-UP (43LK) 12-Bottom Rollers, 2-Carrier Rollers

N/A AT130493 Track Chain 43LK Sealed and Greased (Effective W/Serial # Up to 001352) OFFSET BOLT
HOLES ***SEE NOTE BELOW***
N/A - OEM Only. Replace w/ AT159890HD as Track Groups. Bolt Patterns Are Different
VAT159890HD AT159890 Chain, 43L, Sealed and Greased (Effective W/Serial # 001353-UP) INLINE BOLT HOLES
VAT159890HDV AT159890 Chain, 43L, Sealed and Greased (Effective W/Serial # 001353-UP) (Optional)
Your Track Groups
VAT170089HD Pin & Bushing Group 37 LK Sealed With Master Pin Note: Currently Not Available From VPI
VAT134373HD Link, R/H
VAT134374HD Link, L/H
VAT134375HD Master Link, R/H Note: Currently Not Available From Valuepart
VTH106074HD Track Pin
VD76063A0N00 Master Pin Complete
VAT134376HD Master Pin
VAT134377HD Spacer
VTH110493HD Snap Ring
VAT134379HD Track Bushing
Track Hardware
Track Shoes
Bottom Rollers
VAT130491V AT130491 Roller Assembly
Carrier Rollers
VTH110962V Carrier Rollers
Idlers
V9160965V AT170013 Idler with Bracket
Sprockets
VAT200345V Sprockets (12-Bolt Hole)
Page 410
MODEL: John Deere 160LC
Serial Nos: 160LC:(43LK) 14-Bottom Rollers, 4-Carrier Rollers
160C-LC: (43Lk) 14-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
V031265 Spacer

Your Track Groups
Page 411
Track Hardware
Track Shoes
Bottom Rollers
VHT50 Roller Assembly S/F
VHT50V Roller Assembly S/F (Optional)
Carrier Rollers
VID861 Carrier Roller
Idlers
VAT280859 Idler with Bracket (With S/N: Up- 041910) Sorefa Brand
VAT214392V AT180014 Idler with Bracket (With S/N: Up- 041910) (Optional)
Note: The Idlers listed above (AT280859 & AT214392X ) are the same but made from
different suppliers with different part numbers
V9176864V Idler with Brackets (For 160C-LC)
Sprockets
VAT218227 Sprocket (21T - 16 Bolt Hole)
VAT218227V Sprocket (21T - 16 Bolt Hole) (Optional)
VP67304 Sprocket (21T - 22 Bolt Hole) (For S/N: 041378-Up)
Page 412
MODEL: John Deere 200LC, 200CLC
Serial Nos: 200 LC: 500005-Up (49LK) 16-Bottom Rollers, 4-Carrier Rollers
200 CLC: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
Contact Your VPI Representitive for parts availability on Older Chains.

Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VHT50 Roller Assembly, S/F
VHT50V Roller Assembly, S/F (Optional)
Carrier Rollers
VID861 Carrier Roller (4-Required)
Idlers
Page 413
VAT280859 Idler with Bracket (JD200LC) ITM Brand
VAT214392V AT180014 Idler with Bracket (JD200LC) (Optional)
Note: Idlers above are the same but from different suppliers with different part numbers
V9176864V Idler With Brackets For (JD200CLC Model Only)
V9144658 Track Adjuster Spring Assembly (For JD200LC Model) **Note: Individual Parts Are Not
V9186437 Track Adjuster Spring Assembly (For JD200CLC & JD200DLC Models) **Note: Individual
Parts Are Not Interchangeable. Use Complete Unit Only
Sprockets
VFT3059 Sprocket-Bolt On, 21-Tooth - 16 B/H
VFT3059V Sprocket-Bolt On, 21-Tooth - 16 B/H (Optional)
Page 414
MODEL: John Deere 200DLC, 230LC, 230CLC, 240DLC
Serial Nos: 200DLC: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
230LC: 600001-UP (51LK) 18-Bottom Rollers, 4-Carrier Rollers
230CLC (51Lk) 18-Bottom Roller, 4-Carrier Rollers
240DLC (51LK) 18-Bottom Roller, 4-Carrier Rollers

VKM782/51F Chain, 51L, Unsealed, w/ Press Fit Master Pin
VKM782/51FV Chain, 51L, Unsealed, w/ "T" Type Master Pin (Optional)
VKM782/51HDV Chain, 51L, Sealed & Greased, w/ "T" Type Master Pin (Optional)
Your Track Groups
Track Shoes
Page 415
Track Hardware
Bottom Rollers
VHT50 Roller Assembly
VHT50V Roller Assembly (Optional)
Carrier Rollers
VID861 Carrier Rollers
VID861V Carrier Rollers (Optional)
V9234984V Carrier Rollers (JD200DLC & JD240DLC ONLY)
Idlers
VAT280859 Idler Assy (ITM Brand)
VAT214392V Idler Assy (Optional)
Note: The Idlers above (AT280859 & AT214392V) are the same but from different suppliers
V9176864V Idler With Brackets (JD200DLC, JD230CLC & JD240DLC Model Only)
Sprockets
VFT3059 Sprocket 21T - 16 B/H
VFT3059V Sprocket 21T - 16 B/H (Optional)
V1033091V Sprocket 21T - 18 B/H (JD200DLC ONLY)
V1032489V Sprocket 21T - 20 Bolt (JD240DLC ONLY)
Page 416
Serial Nos: 270LC:(50LK) 18-Bottom Rollers, 4-Carrier Rollers

VKM959/50F Chain, 50L, Unsealed, w/ Press Fit Master Pin
VKM959/50FV Chain, 50L, Unsealed, w/ "T" Type Master Pin (Optional)
V992658HD Chain, 50L, Sealed and Greased, w/ Snap Ring Master Pin
VKM959/50HDV Chain, 50L, Sealed and Greased, w/ "T" Type Master Pin (Optional)
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VAT250257V Roller Assembly, S/F (Optional) ** NOTE old part number AT201169V
Carrier Rollers
VFT2784 Carrier Roller (Early - JD270, JD270LC Models-Tread Diameter 150mm)
VFT2784V Carrier Roller (Optional) (Early - JD270, JD270LC Models-Tread Diameter 150mm)
VAT250248V Carrier Roller (120mm Tread Dia) NOTE: Will Require Spacer if used w/ Early Models)
Idlers
VAT178256V Idler Assembly
Sprockets
VAT202586 Sprockets (20-Bolt Hole)
VAT202586V Sprockets (Optional)
Page 417
MODEL: John Deere 330LC, 270DLC, 350DLC
Serial Nos: JD330LC: (48LK) 18- Bottom Rollers, 4-Top Rollers
JD270DLC: (48LK) 16-Bottom Roller, 4-Top Rollers
JD350DLC: (48LK) 16-Bottom Roller, 4-Top Rollers

Your Track Groups
VKM1365 Track Pin
VKM1366 Master Pin
VKM2233/48HD AT250256 Chain, 48L, Sealed and Greased, w/ Press Fit Master Pin
VKM2233/48HDV Chain, 48L, Sealed and Greased, w/ "T" Type Master Pin (Optional)
Your Track Groups
ValuePart Components are NOT compatible with OEM chains.
VKM2329/48HD Pin & Bushing Group 48Lk Sealed With "M"M Type Seal
VKM1365 Track Pin
VKM1366 Master Pin
VKM1905HD Bushing
Track Hardware
V3081343 AT219650 Track Bolt M22 x 59mm X 1.5mm
V76007851 AT219651 Track Bolt 22mm X 70mm (Use With 2-Bar Shoe SJ.0162/0700)
V79035320 AT219651 Track Nut M22 x 1.5mm
Track Shoes
Bottom Rollers
VAT201169 AT250257 Roller Assembly S/F
VAT250257V Roller Assembly S/F (Optional)
V6V9667 Roller Mounting Bolt - M20 x 100mm (4 per Roller)
V9247454V Roller Assembly S/F (JD270DLC & JD350DLC Models Only)
N/A Roller Mounting Bolt - M22 x 110mm (4 per Roller)
Page 418
Carrier Rollers
VAT250248V AT250248 Carrier Roller
V6V4429 Carrier Mounting Bolt - M16 x 40mm (4 per Carrier)
N/A OEM ONLY Carrier Roller (JD270DLC & JD350DLC Models Only)
Idlers
VAT250450V AT250450 Idler Group
V6V4429 Idler Mounting Bolt - M16 x 40mm (4 per Idler)
Sprockets
V1022168V Sprocket
V6V3532 Sprocket Mounting Bolt - M20 x 60mm (20 per sprocket)
V1033227V 1033227 Sprocket 21T - 24 B/H (JD270DLC Model Only)
V1033163V 1033163 Sprocket 21T - 22 B/H (JD350DLC Model Only)
Page 419
MODEL: John Deere 370, 450LC, 450CLC, 450DLC
Serial Nos: 370: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
450LC:(53LK) 18-Bottom Rollers, 6-Carrier Rollers
450CLC:(53LK) 18-Bottom Rollers, 6-Carrier Rollers
450DLC: (53LK) 18-Bottom Rollers, 6-Carrier Rollers

VHT227/49HD 9133225 Chain, 49K, Sealed & Greased, w/ "T" Type Master Pin (AT250247)
VHT227/49HDV 9133225 Chain, 49K, Sealed & Greased, w/ "T" Type Master Pin (AT250247) (Optional)
VHT227/53HD Chain, 53L, Sealed & Greased, w/ "T" Type Master Pin (AT201936)
VHT227/53HDV Chain, 53L, Sealed & Greased, w/ "T" Type Master Pin (AT201936) (Optional)
Your Track Groups
VCR1540HD p
Spacer
Track Hardware
Track Shoes
Bottom Rollers
Page 420
Carrier Rollers
VAT201927V Carrier Roller (Optional)
Idlers
V9244297V 9244297 Idler with Bracket (Fits Only 450DLC)
V9099143 9141014 Track Adjuster Spring Assembly (For JD450L)
V9155799 9155799 Track Adjuster Spring Assembly (For JD450CLC Models Only)
Sprockets
VFT3061 Sprockets (24-Bolt Hole)
VFT3061V Sprockets (Optional)
Page 421
Specs Pitch= 228.6mm, Link Height =133mm, Bushing
Serial Nos: 550LC: (52LK) 18-Bottom Rollers, 6-Carrier Rollers

Your Track Groups
V4326065 Track Pin
Track Hardware
V4295784 4295784 Track Shoe Bolt 24MM X 81MM
V4295785 4295785 Track Shoe Nut, 24MM Special
Track Shoes
V4295783 4295783 Shoe, 3 B 600mm
V4295787 4295787 Shoe, 3 B 750mm
V4352992 4352992 Shoe, 3 B 900mm
Bottom Rollers
V4348373V 4348373 Roller Assembly, S/F (Optional)
Carrier Rollers
Idlers
V9137270 9137270 Idler with Bracket
Sprockets
V1020265 1020265 Sprocket
V1020265V Sprocket (Optional)
Page 422
MODEL: John Deere 750, 800C, 850D
Specs Pitch= 260mm, Link Height =152mm, Bushing
Serial Nos: 750: (51LK) 18-Bottom Rollers, 6-Carrier Rollers
800C: (51 LK) 18- Bottom Rollers, 6- Carrier Rollers
850D: (51 LK) 18- Bottom Rollers, 6- Carrier Rollers

Your Track Groups
V4345170 Track Pin
Track Hardware
Track Shoes
Use OEM 4218739 Track Shoe 650mm 2 B With Mud Hole
Bottom Rollers
V4473720 4350792 Roller Assembly
V4473720V 4350792 Roller Assembly (Optional)
Carrier Rollers
N/A 4638433 Carrier Roller (Fits Only JD850DLC Model)
Idlers
V9126760 9134272 Idler Group (For JD 750 Model)
V9134272V 9134272 Idler Group (For JD 750 Model) (Optional)
V4479885 4479885 Idler Group (For JD 800C Model)
OEM ONLY 4658418 Idler Group (For JD 850D Model)
Sprockets
V1017812V 1017812 Sprocket 23T - 24 B/H (Hub I.D. is 688mm) (Models EX700, JD750-5)
V4430291V 4430291 Sprocket 23T - 24 B/H (Hub I.D. is 668mm) (Models JD800C & JD850D)
Page 423
MODEL: John Deere 490, 490D, 490E
Serial Nos: 490:(43 LK)
490D: (43 LK) 14-Bottom Rollers, 2-Carrier Rollers

VCR4855/43/20 Use CR4855/4320H
VCR4855/43/24 Use CR4855/4324H
VCR4855/43/28 Use CR4855/4328H
VCR4855/44/20 Use CR4855/4420H
VCR4855/44/24 Use CR4855/4424H
VCR4855/44/28 Use CR4855/4428H
VCR4855/44/30 Use CR4855/4430H
Your Track Groups
VCR4876/47 Pin & Bushing Group, 47 LK-Master Pin Type ** Note - Not interchangeable with OEM
Chains **
0449DOM, D7610, A171J, and 1014776*
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
Your Track Groups
Chains **
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VCR3197HD Spacer
Page 424

Your Track Groups
VCR4876/47HD Pin & Bushing Group, 47 LK-Master Pin Type
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Track Hardware
Track Shoes
Page 425
Bottom Rollers
VHT49V Roller Assembly(Optional)
VAT166891 Roller Assembly, S/F(490E)
VAT166891V Roller Assembly, S/F(490E)(Optional)
V9W6647 Seal Group
Carrier Rollers
VAT131369V Carrier Roller Assembly (490D)
VAT154514 Carrier Roller Assembly (490E)
VAP34654V Carrier Roller Assembly (490E) (Optional)
VAT167822 Bushing
Idlers
V9165649V AT172563 Idler with Bracket (For 490 Model Only) (Replacement for AT172563, Complete Assembly
Only. Cannot Interchange Components)
9165902 Idler with Brackets (For 490D Model Only)
VAT180421 AT172696 Idler with Bracket (For 490E Models Only)
VAT180421V Idler with Bracket (Optional) (For 490E Models Only)
V9092563 Track Adjuster Spring Assembly (For 490E Model) **Note: Individual Parts Are Not
Sprockets
VTH100465 Sprocket (For John Deere 490 Only) Currently Not Available. OEM Only
VFT3056 Sprocket-Bolt On-(21 Teeth)**Fits 490D & E Only
VFT3056V Sprocket-Bolt On-(21 Teeth)**Fits 490D & E Only (Optional)
Page 426
MODEL: John Deere 590D
Specs 6.75" pitch, Link Height = 96mm, Track Bushing O.D.
=53.9mm & 5/8" Bolt Diameter
Serial Nos: 590D:(45 LK) 14-Bottom Rollers, 4-Carrier Rollers

VAT159899HD Chain, 45L, Sealed & Greased, w/ Master Pin
VAT159899HDV Chain, 45L, Sealed & Greased, w/ Master Pin (Optional)
* New Style Chain With Press Fit Master Pin, Verify Master Pin. *
Your Track Groups
VAT126063HD Track Link, L.H..
VAT126062HD Track Link, R.H..
VD7615301N00 Master Pin Complete (Press Fit Style)
VAT159902HD Spacer
Components For "Snap Ring" Style Track Chain
VAT170091HD Pin and Bushing Group, 47LK
VLS590DRYHD Link Segment
VAT126063HD Track Link, L.H..
VAT126062HD Track Link, R.H..
VAT126221HD Sealed Pin
VAT159901HD Master Pin "Snap Ring" Style
VAT126300HD Snap Ring
VAT159902HD Spacer
VAT159904HD Sealed Bushing
Track Hardware
V7H3597 Track Bolt, 5/8" (use for T121478)
Track Shoes
VAT126069 Shoe, 3 B 500mm w/ Mud Hole
V99J73 Shoe, 3 B 600mm w/ Mud Hole
VAT126080 Shoe, 3 B 700mm w/ Mud Hole
Bottom Rollers
VAT127162V Roller Assembly, S/F (Optional)
VAT182985V Roller Assembly, S/F (Optional)
V175.30.00702 Seal Group
VAT126104AM Bushing
Carrier Rollers
VFT2744 Carrier Roller (Thru Serial Number 2294)
VFT2744V Carrier Roller (Optional) (Thru Serial Number 2294)
See Note on the AT170410 Carrier Roller (Serial number 2295 -Up, Shell Diameter is smaller on this roller. Can use
right: FT2744 When replacing all carrier rollers)
Idlers
V9165649V Idler with brackets
V9069753 Track Adjuster Spring Assembly Without Yoke
Sprockets
VFT3057 Sprocket-Bolt On
Page 427
MODEL: John Deere 690B, 690C, 690D, 690DB, 690DLT,
690DDLT
Specs 6.74" pitch, link height = 94.5 mm, Bushing OD = 50.6
Serial Nos: 690B:(47 LK) 18-Bottom Rollers
690C:(47 LK) 18-Bottom Rollers
690D:527775 (47 LK) 18-Bottom Rollers, 4-Carrier Rollers
690DB:527776-up (48 LK) 18-Bottom Rollers
690DLT:527775 (51 LK) 18-Bottom Rollers
690DDLT:527776-up (53 LK) 18-Bottom Rollers

VCR4855/47/24 Use CR4855/4724H
VCR4855/47/28 Use CR4855/4728H
Your Track Groups
Chains **
0449DOM, D7610, A171J, and 1014776*
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
Your Track Groups
Chains **
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VCR3197HD Spacer
Page 428

Your Track Groups
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Track Shoes
Track Hardware
Page 429
Bottom Rollers
VPC377 Roller Assembly, S/F-Excavator Style-Itrac Type
Carrier Rollers
VFT2744 Carrier Roller - Check if machine has "slide plates" as Carrier Roller
VFT2744V Carrier Roller (Optional) Check if machine has "slide plates" as Carrier Roller
Idlers
VID609 Idler With Brackets
VID609V Idler With Brackets (Optional)
Sprockets
VID560 T39973 Sprocket (Only For 690B S/N Up to 400372)
VID560V Sprocket (Only For 690B S/N Up to 400372) (Optional)
Use OEM T71024 Sprocket (Only For 690B S/N 400373 - Up)
VID1311 Sprocket (Only for 690D)
VID1311V Sprocket (Only for 690D) (Optional)
Page 430
MODEL: John Deere 690E
60mm, 20mm Bolt Diameter
Serial Nos: 690ELC:(49LK) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
V031265 Spacer
Your Track Groups
Page 431
Track Shoes
Track Hardware
V9691/06 Track
T k Nut
N t SQ M20 (25 mm Thi
Thick)
k)
Carrier Rollers
VID861 Carrier Rollers
Bottom Rollers
VID856 Roller Assembly, S/F-Excavator Style-Itrac Type
Sprockets
VID863 T139591 Sprocket (21 tooth) 16-Bolt Hole
VID863V Sprocket (21 tooth) (Optional)
Idlers
VID892 AT152096 Idler Group
VID892V Idler Group (Optional)
Page 432
MODEL: John Deere 790, 790D, 790LT, 790DLT. 790E
60mm, 20mm Bolt Diameter
Serial Nos: 790:(46LK) 16-Bottom Rollers, 4-Carrier Rollers
790D:(47LK) 16-Bottom Rollers, 4-Carrier Rollers
790LT:(50LK) 18-Bottom Rollers, 4-Carrier Rollers
790DLT:(51LK)
790E-LC:(51LK) 18-Bottom Rollers, 4-Carrier Rollers

VKM782/46F Chain, 46L, Unsealed. w/ Master Pin
VKM782/46FV Chain, 46L, Unsealed. w/ Master Pin (Optional)
VKM782/51F Chain, 51L, Unsealed, w/ Master Pin (AT154855)
VKM782/51FV Chain, 51L, Unsealed, w/ Master Pin (AT154855) (Optional)
VKM969/51/600 Track Group, 51L, Unsealed, w/ Master Pin, w/ 3 B 600mm Shoe
VKM969/51700V Track
T k Group,
G 51L,
51L UUnsealed,
l d w// M
Master
t PiPin, w// 3 B 700
700mm Sh
Shoe (O
(Optional)
ti l)
VKM969/51800V Track Group, 51L, Unsealed, w/ Master Pin, w/ 3 B 800mm Shoe (Optional)
Your Track Groups
V031265 Spacer

Page 433
Your Track Groups
VKM70HDM yp
Seal "M" Type
Track Hardware
Track Shoes
Bottom Rollers
Page 434
VHT50 AT166892 Roller Assembly, S/F (790E)
VHT50V Roller Assembly, S/F (790E) (Optional)
VAT166892V Roller Assembly, S/F (790E) (Thick Mounting Collar)
VHT47 Roller Assembly, S/F (790, 790D)
VHT47V Roller Assembly, S/F (790, 790D) (Optional)
VCR1195 Seal Group
VTH108093 Bushing
Carrier Rollers
VFT2772 AT214385 Carrier Roller Assembly
VFT2772V Carrier Roller Assembly (Optional)
VTH108089 Bushing
Idlers
VAT172699V Idler group (Effective with Serial numbers Up to 015713)
VAT280859 Idler group (Effective with Serial # 015714-Up) Sorefa Brand
VAT214392V Idler group (Effective with Serial # 015714-Up) (Optional)
Note: The Idlers listed above (AT280859 & AT214392X) are the same, but made from
different suppliers with different part numbers
Sprockets
VTH102284 Sprocket-Bolt On (790)
VFT3059 Sprocket-Bolt On (790D & E)
VFT3059V Sprocket-Bolt On (790D & E) (Optional)
Page 435
MODEL: John Deere 792, 792LT, 792DLC
Serial Nos: 792:(46LK)
792LT:(49LK)
792DLC:(50LK) 18-Bottom Rollers, 4-Carrier Rollers

VKM970/46/600 Use KM970/46600H
VKM970/49/600 Use KM970/49600H
VKM970/50/600 Use KM970/50600H
Your Track Groups
VCR1632 p
Spacer ((AT159079))
Your Track Groups
VKM1365HD Track Pin
VCR1632HD Spacer
VKM170HD Bushing
Track Hardware
Page 436
Track Shoes
Bottom Rollers
VTH111594V Roller Assembly, S/F (Optional)
VTH103155 Bushing
Carrier Rollers (Use OEM)
VFT2784 Carrier Roller (JD 792D)
VFT2784V Carrier Roller (Optional) (JD 792D)
Idlers
Sprockets
VTH103099 Sprocket-Bolt On (For 792, 792-LT Models Only)
VFT3060 TH111091 Sprocket-Bolt On (For 792DLC Model Only) 16-Bolt Hole
FT3060V Sprocket-Bolt On (For 792DLC Model Only) 16-Bolt Hole (Optional)
Page 437
MODEL: John Deere 892DLC, 892E
Serial Nos: 892DLC:(50LK) 18-Bottom Rollers, 4-Carrier Rollers
892E:(50LK) 18-Bottom Rollers, 4-Carrier Rollers
Sealed Track Chains and Track Groups Components are not

interchangeable with OEM)
VKM959/50 Use KM959/50F
VKM970/50/600 Use KM970/50600H
VKM970/50/800 Use KM970/50800H
Your Track Groups
VKM959/50HDV Chain, 50L, S
Ch i 50L Sealed
l d and
dGGreased,
d w// M
Master Pin (O
t Pi (Optional)
ti l)
Your Track Groups
VKM1365HD Track Pin
VCR1632HD Spacer
VKM170HD Bushing
Track Hardware
Track Shoes
Page 438
Bottom Rollers
VTH111594V Roller Assembly, S/F (892D)
VAT201169 Roller Assembly, S/F (892E) ** Note old part number is AT201169 **
VAT250257V Roller Assembly, S/F (892E) (Optional) ** Note old part number is AT201169 **
VTH103155 Bushing
Carrier Rollers
VFT2784 Carrier Roller
VFT2784V Carrier Roller (Optional)
Idlers
V9097317 Track Adjuster Spring Assembly (892E-LC)
Sprockets
VFT3060 Sprocket-Bolt On-(892DLC) 16-Bolt Hole (Also fits 892E-LC Up to S/N 10999)
VAT202586 Sprocket-Bolt On-(892ELC Effective with S/N 11000-Up) 20-Bolt Hole
VAT202586V Sprocket-Bolt On (Optional)
Page 439
MODEL: John Deere 992DLC
Serial Nos: 992DLC:(53LK) 20-Bottom Rollers, 4-Carrier Rollers

VMT14/53 Chain, 53L, Sealed, w/ Master Pin (AT132591)
VMT22/53/750 Track Group, 53L, Sealed, w/ Master Pin, w/ 3 B 750mm Shoe
VMT22/53/900 Track Group, 53L, Sealed, w/ Master Pin, w/ 3 B 900mm Shoe
Your Track Groups
VKM1398 Sealed Pin
VKM804 Spacer
Track Hardware
V79035320 Track Nut
Track Shoes
Bottom Rollers
VAT132116 Use LH90 Roller
VAT131224 Seal Group
VLH90V Roller Assembly, S/F (Optional)
Carrier Rollers
VFT2990 Carrier Roller
Idlers
VAT201944V 9165848 Idler Group With Brackets
Sprockets
Page 440
MODEL: John Deere 992ELC
Serial Nos: 992ELC:(53LK) 20-Bottom Rollers, 4-Carrier Rollers

VHT227/53HD Chain, 53L, Sealed & Greased, w/ Master Pin (AT201936)
VHT227/53HDV Chain, 53L, Sealed & Greased, w/ Master Pin (AT201936) (Optional)
VHT226/53750H Track Group, 53L, Sealed & Greased, w/ Master Pin, w/ 3 B 750mm Shoe
VHT226/53900H Track Group, 53L, Sealed & Greased, w/ Master Pin, w/ 3 B 900mm Shoe
Your Track Groups
VCR1540HD Spacer
Track Hardware
Track Shoes
Bottom Rollers
VAT131224 Seal Group
Carrier Rollers
Page 441
VAT201927V Carrier Roller (Optional)
Idlers
V9099143 Track Adjuster Spring Assembly For S/N: 006004-Up)
Sprockets
Page 442
MODEL: John Deere 493D Feller Buncher
Specs 6.74" pitch, link height = 94.5 mm, Bushing OD = 50.6
Serial Nos: 493D: (43LK) 14-Bottom Rollers

VCR4855/43/20 Use CR4855/4320H
VCR4855/4320V Use CR48554320HV (Optional)
VCR4855/43/24 Use CR4855/4324H
VCR4855/43/28 Use CR4855/4328H
VCR4855/44/20 Use CR4855/4420H
VCR4855/44/24 Use CR4855/4424H
VCR4855/44/28 Use CR4855/4428H
VCR4855/44/30 Use CR4855/4430H
Your Track Groups
Chains **
0449DOM, D7610, A171J, and 1014776*
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
Your Track Groups
Chains **
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VCR3197HD Spacer
Page 443
Your Track Groups
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
VT55263HD Track Pin
Track Hardware
Track Shoes
Page 444
VHT49V Roller Assembly(Optional)
Carrier Rollers
Idlers
9165902 Idler with Brackets
Sprockets
VFT3056 Sprocket-Bolt On, 21-Tooth, 16-Bolt Hole
VFT3056V Sprocket-Bolt On, 21-Tooth, 16-Bolt Hole(Optional)
Page 445
MODEL: John Deere 653E, 653G Feller Buncher
Serial Nos: 653E: (43LK)
653G: (Serial Number up to 880059) (43LK)
Must Check Track Chain Pitch & Roller Count


Your Track Groups
V031265 Spacer

Your Track Groups
Page 446
Track Hardware
Track Shoes
VKM783/750 Track
T k Shoe,
Sh 3 B 750mm
750
Bottom Rollers
VID856 AT168636 Roller Assembly S/F (For 653G S/N Up to 880059)
VID856V Roller Assembly S/F (Optional)
Idlers
AT152097 Idler Group W/Yoke Assembly (Can Use VID892) (For 653G S/N: Up to 880059)
VID892 AT152096 Idler Group W/Brackets (For 653G S/N: Up to 880059)
VID892V Idler Group W/Brackets (For 653G S/N: Up to 880059) (Optional)
Sprockets
VID863 AT205126 Sprocket 21-Tooth, 16-Bolt Hole (Use With Standard Duty U/C For All S/N)
VID863V Sprocket 21-Tooth, 16-Bolt Hole (Use With Standard Duty U/C For All S/N) (Optional)
Page 447
MODEL: John Deere 653E, 653G Feller Buncher Heavy
Duty U/C
Bushing O.D. = 66.7mm Bolt Hole = 3/4"
Serial Nos:
653G: S/N: 880060-Up (43Lk) Heavy Duty U/C Use All D/F Rollers
Must Check Track Chain Pitch & Roller Count
New Style Sealed & Greased Track Chains "M" Type Seal and
Track Groups 121.5mm Link Height
Your Track Groups
VCR1630HDM Seal, Polyeurathane "M" Type
VCR1632HD Spacer
Sealed Chains **Pro Link** (ITM has 128mm Link Height)
(V-Track has 121.5mm Link Height)
VCR3176/43 Chain, 43L, Sealed, w/ Master Pin Bush OD (66.67mm) Link Height = 128mm
VCR3176/43V Chain, 43L, Sealed, w/ Master Pin Bush OD (66.67mm) Link Height = 128mm (Optional)

Your Track Groups
Page 448
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Track Hardware
V7H3598 Track Bolt 3/4"X2.3/8"
Track Shoes
Bottom Rollers
VCR5366V AT189796 Roller Assembly D/F
Idlers
251402865 Idler Group W/Brackets (For 653G S/N: 880060 Heavy Duty U/C)
Sprockets
VKO111V Sprocket 23-Tooth, 20-Bolt Hole (For 653G S/N: 880060- Up Heavy Duty U/C)
N/A VA1809 Sprocket 23-Tooth, 24-Bolt Hole (MUST CONFIRM BOLT COUNT)
Page 449
MODEL: Kobelco SK 60, SK 70SR, SK 75UR-1 & 2, SK
95UR-1
SK 60: (38LK)
SK 70SR: (39LK)
SK 75UR-1 & 2: (38LK)
SK 95UR-1: (40LK)
Note: Verify OEM numbers with VPI numbers before ordering. Any questions
please call our customer service representatives
Rubber Tracks
V64774SI Rubber Track (For SK 60, SK 75UR-1 & 2)
V64776SI Rubber Track (For SK 70 SR)
Your Track Groups
V9156478HD 24100N6311F1 Chain, 38L, Sealed & Greased, w/ Master Pin
V9156478HDV 24100N6311F1 Chain, 38L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups p
Track Shoes
VKM1685/450 Shoe, 3 B 450mm
VAT183364 2041367 Shoe, 3 B 600mm
Track Hardware
Bottom Rollers
24100N6292F2 Roller Assembly (For SK 60 Model)
LE64D00001F2 Roller Assembly (For SK 70 SR Model)
Carrier Rollers
LE64D01006F1 Carrier Rollers
Idlers
24100N6296F1 Idler with Brackets (For SK 60 Model)
YT52D00002F1 Idler with Brackets (For SK 70 SR Model)
Sprockets
2404N267 Sprocket
Page 450
MODEL: Kobelco SK 100 Mark III, IV, V, SK 110 Mark IV,
SK 115DZ, SK 120 Mark III, IV, SK 130 Mark IV
Specs Pitch= 6.750", link height = 96.0 mm, Bushing OD =

SK 100 Mark III: (41LK) 12-Bottom Rollers, 2-Carrier Rollers
SK 100 Mark IV: (41LK) 12-Bottom Rollers, 2-Carrier Rollers
SK 100 Mark V: (41LK) 12-Bottom Rollers, 2-Carrier Rollers
SK 110: (41LK)
SK 120 Mark III: (43LK) 12-Bottom Rollers, 2-Carrier Rollers
SK 120LC Mark III: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
SK 130 Mark IV: (43LK) 12-Bottom Rollers, 2-Carrier Rollers
SK 130LC Mark IV: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
SK 115DZ: (43LK)
SK 135SRL: (46LK)
SK 135SRLC: (46LK)

VKB100/41 24100J16939F1 Chain, 41L, Sealed & Greased, w/ Master Pin
VKB100/41V 24100J16939F1 Chain, 41L, Sealed & Greased, w/ Master Pin (Optional)
VKB100/44 Chain, 44L, Sealed & Greased, w/ Master Pin (Optional)
VKB100/44V Chain, 44L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VKB100 Link Segment
VDY612000M02 Link, LH
VDY612000M01 Link, RH
VDY612000N24 Pin
VDY612300N00 Master Pin Group
VKB100MPGV Master Pin Group (V-Track "T" Headed) (Can Use VKM1798HD)
Seal Assembly
VDY612000N23 Bushing
VDY612000N27 Master Bushing
Track Shoes
VCR3248/14 9G6396 Track Shoe, w/ 3 B 350mm
Page 451
Track Hardware
Bottom Rollers
V24100N6505F1 24100N6505F1 Roller Assembly
V23100N4042V Roller Assembly (Optional)
Carrier Rollers
V24100N6506F1 24100N6506F1 Carrier Rollers
V24100N6506V Carrier Rollers (Optional)
Idlers
V24100N6504F1 24100N6369F2 Idler with Brackets
V24100N6504V 24100N6369F2 Idler with Brackets (Optional)
Sprockets
V2404N416 2404N271 Sprocket 21-Tooth, 15-Bolt Hole
V2404N271V Sprocket 21-Tooth, 15-Bolt Hole (Optional)
V2404N427V Sprocket 21-Tooth, 21-Bolt Hole (SK100 Mark V ONLY)
Page 452
MODEL: Kobelco K907A,B,C, K907LC, K907CLC,
K907D, K907DLC
Serial Nos: K907A,B,C: (48LK) 14-Bottom Rollers
K907LC: (52LK) 16-Bottom Rollers
K907C-LC: (51LK) 16-Bottom Rollers
K907D: First Type (48LK) 14-Bottom Rollers
K907D-LC: First Type (51LK) 16-Bottom Rollers

VCR2006/51V Chain, 51L, Sealed, w/ Master Pin (Optional)
Your Track Groups
VCR3204/40 Pin and Bushing group, 40 LK Unsealed
VCR255 Sealed Pin
VCR1605 Master Pin
VPC57 Spacer
VCR256TH Unsealed Bushing
Track Shoes
Track Hardware
Bottom Rollers
VKB1V 24100N2157F2 Roller Assembly
Carrier Rollers
V24100N1809V 24100N1809F1 Carrier Rollers (K907C Only)
24100N2110F1 Carrier Rollers (K907CLC Only)
Idlers
24100N2885F2 Idler Group (For K907D, DLC Models Only)
Sprockets
V2404N182C2V 2404N182C2 Sprocket 23-Tooth, 22-Bolt Hole (For K907B, C, CLC Only)
2404N246 Sprocket 23-Tooth, 22-Bolt Hole (For K907D, DLC Only)
Page 453
MODEL: Kobelco K907 Mark II, K907LC Mark II, K907D
(Second Type), K907DLC (Second Type)
K907LC Mark II
Serial Nos: K907D: Second Type (48LK) 14- Bottom Rollers, 4-Carrier Rollers
K907D-LC: Second Type (52LK) 16-Bottom Rollers, 4-Carrier Rollers
K907 MARK II: (49LK) 14-Bottom Rollers, 4-Carrier Rollers
K907 LC MARK II: (53LK) 16-Bottom Rollers, 4-Carrier Rollers

VHT21/52/600 Track Group, 52L, Sealed, w/ Master Pin, w/ 3 B 600" Shoe
Your Track Groups
VCR4798/53 Pin and Bushing Group,
Group 53 LK
VCR4795 Sealed Pin
VCR2166 Seal Washer
Your Track Groups
VPBG225DRHD Pin and Bushing Group, 48 LK
VHT19HD Track Link, L.H.
VHT18HD Track Link, R.H.
Track Shoes
Page 454
VHT20/600 Shoe, 3 B 600 mm
VHT20/700 Shoe, 3 B 700 mm
VHT20/800 Shoe, 3 B 800 mm
Track Hardware
Bottom Rollers
VKB1V 24100N2157F2 Roller Assembly
Note: Confirm OEM numbers before ordering bottom rollers
Carrier Rollers
VFT2759 24100N4057F1 Carrier Roller (K907 Mark II, K907LC MarkII, K907DLC 2nd Type, K907D 2nd Type)
VFT2759V 24100N4057F1 Carrier Roller (Optional)
V24100N2961V Carrier Roller (For K907 Mark II)
Sprockets
2404N246 Sprocket 23-Tooth, 16-Bolt Hole
Page 455
MODEL: Kobelco K909
Specs Pitch= 7.484", Link Ht = 105mm, Bushing O.D. =
Serial Nos: K909:(47LK)

Your Track Groups
V031265 Spacer

Your Track Groups
Page 456
Track Hardware
Track Shoes
Page 457
MODEL: Kobelco K909A, K909 Mark II, K909ALC,
K909LC Mark II
Serial Nos: K909A:(47LK)
K909 Mark II: (47Lk)
K909ALC, LC Mark II:(51LK)

Your Track Groups
VKM1149/51F Pin and Bushing g Group,
p, 51Lk Unsealed
V031265 Spacer

Your Track Groups
Page 458
Track Hardware
V20Y.32.11210 Track Bolt, 20mm X 53mm (OEM Track Shoe - Base Plate Thickness = 7-8mm)
Track Shoes
V2273-6080D1
V2273 6080D1 Track
T k Shoe,
Sh 2 B 610mm,
610 w// Mud
M d Hole
H l
Bottom Rollers
24100J6186F1 Roller Assembly
Carrier Rollers
VFT2759 24100N5946F2 Carrier Roller With Bracket
VFT2759V 24100N5946F2 Carrier Roller With Bracket (Optional)
Sprockets
2404N183C2 Sprocket 23-Tooth, 20-Bolt Hole
Page 459
MODEL: Kobelco SK150LC Mark III, SK160LC Mark III,
SK200 Mark III/IV, SK200LC Mark III/IV, SK210
Mark III, SK210LC Mark III, SK220 Mark III/IV,
SK220LC Mark III/IV, SK235 SR, SK235 SRLC,
SK250LC Acera "LIGHT DUTY"
Specs
Serial Nos: SK150LC Mark III: (44LK)Bottom Rollers Required (14), 4-Carrier Rollers
SK160LC Mark III: (44LK)Bottom Rollers Required (14), 4-Carrier Rollers
SK200 Mark III: (45LK)Bottom Rollers Required (14), 4-Carrier Rollers
SK200 Mark IV: (45LK)Bottom Rollers Required (14), 4-Carrier Rollers
SK200LC Mark IV: (49LK)Bottom Rollers Required (16), 4-Carrier Rollers
SK210 Mark III: (45LK)Bottom Rollers Required (14), 4-Carrier Rollers
SK210 Mark IV: (46LK) 14-Bottom Rollers, 4-Carrier Rollers
SK210LC Mark IV: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
SK220 Mark III & IV "Light Duty": (49Lk) (16) Bottom Rollers, 4-Carrier
Rollers
SK220LC Mark III & IV "Light Duty": (52LK) Bottom Rollers Required (18),
Top Roller (4)
SK235 SR "Light Duty" 7.48" Pitch: (47Lk) 14-Bottom Rollers, 4-Carrier
Rollers
SK235SRLC "Light Duty" 7.48" Pitch: (51Lk)
(
SK250LC Acera: (51Lk) )
Sealed & Greased Chains and Track Groups Track Chain
VCR5350/44HD 24100J16940 Chain, 44L, Sealed & Greased w/ Master Pin

VCR5350/44HDV 24100J16940 Chain, 44L, Sealed & Greased w/ Master Pin (Optional)
VCR5350/45HD 24100J12150F5 Chain, 45L, Sealed & Greased, w/ Master Pin
VCR5350/45HDV 24100J12150F5 Chain, 45L, Sealed & Greased, w/ Master Pin (Optional)
VCR5350/48HD LQ62DU0002F2 Chain, 48L, Sealed & Greased, w/ Master Pin
VCR5350/48HDV LQ62DU0002F2 Chain, 48L, Sealed & Greased, w/ Master Pin (Optional)
VCR5350/52HD LQ62DU0002F1 Chain, 52L, Sealed & Greased, w/ Master Pin
VCR5350/52HDV LQ62DU0002F1 Chain, 52L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VCR5092HD 2424J376 Track Link, R.H.
VCR5091HD 2424J377 Track Link, L.H.
Page 460

VCR5096HD Spacer
Track Hardware
Track Shoes
VCR5360/900 9W93512 Track
T k Shoe,
Sh w// 3 B 900mm,
900 w// Mud
M d Hole
H l
Bottom Rollers
V24100N6419F2 24100N6419F2 Roller Assembly
V24100N6419V Roller Assembly (Optional)
VYN64D00013F1V YN64D00013F1 Roller Assembly (SK200-5 & SK210)
Carrier Rollers
V24100N6420 24100N6420 Carrier Roller
V24100N6420V 24100N6420 Carrier Roller (Optional)
VYN64D01022F1 Carrier Roller (For SK210 Mark VI, SK235SR, SK235SRLC)
Idlers
V24100N5948F4 24100N6417F1
Idler Group (For SK 150LC Mark III, SK 200 Mark III, IV, SK 200LC III, IV, SK 210 Mark III,
IV, SK 210LC Mark III)
V24100N5948FV 24100N6417F1 Idler Group (For SK 150LC Mark III, SK 200 Mark III, IV, SK 200LC III, IV, SK 210 Mark III,
IV, SK 210LC Mark III) (Optional)
V24100J11697FV 24100J11697F1 Idler Group (For SK 220 Mark III, SK 220LC Mark III & SK250LC Models)
Sprockets
VR16150A0Y01 2404N427 Sprocket, 21-Tooth, 21-Bolt Hole (For SK150LC Mark III & IV)
V2404N414 2404N262 Sprocket, 21-Tooth, 22-Bolt Hole (For SK200/SK200LC & SK210/SK210LC Mark III & IV)
V2404N262V 2404N262 Sprocket, (For SK200 Mark III & IV, SK210LC Mark III & IV) **Optional V from above**
VLQ51D01001P1 Sprocket, 23-Tooth, 20-Bolt Hole(SK220/SK220LC Mark III & IV "Light Duty", SK250LC)
VLQ51D01002P1 Sprocket, 21-Tooth, 26-Bolt Hole(SK235-SR/SK235-SRLC "Light Duty", SK250LC Acera)
VLQ51D01002PV Sprocket, 21-Tooth, 26-Bolt Hole (Optional)
Page 461
MODEL: Kobelco K912, K912A, K912ALC, K912LC Mark
II
K912A: (46Lk)
K912ALC:(51LK)
K912LC Mark II: (51Lk) Note: Some machines may have KB270/51 chains.
Can use KM959/51 chains when supplying track groups

Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM970/46/600 Use KM970/46600H
VKM970/51/600 Use KM970/51600H
VKM970/51/700 Use KM970/51700H
VKM970/51/750 Use KM970/51750H
VKM970/51/800 Use KM970/51800H
Your Track Groups
VKM1365 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Page 462
Your Track Groups
VKM1033HD Link, R/H
VKM1034HD Link, L/H
VKM1365HD Track Pin
VCR1632HD Spacer
Track Hardware
Track Shoes
VZV0652A0N600 Track
T k Shoe,
Sh 2 B 24",
24" w// Mud
M d Hole
H l
Bottom Rollers
VLC64DU0001F1 LC64DU0001F1 Roller Assembly
VLC64DU0001V Roller Assembly (Optional)
Carrier Rollers
VLC64DU0002V Carrier Roller (Optional)
Idlers
VLC52DU0001F1 LC52DU0001F1 Idler Group
VLC52DU0001FV LC52DU0001F1 Idler Group (Optional)
Sprockets
VLC53DU0001P1 Sprockets, 23- Tooth, 26-Bolt Hole (17.1/4" Hub I.D. - Verify measurement before ordering)
VLC53DU0001PV Sprockets, 23- Tooth, 26-Bolt Hole (17.1/4" Hub I.D.) (Optional)
Page 463
MODEL: Kobelco SK220 Mark III, IV, SK220LC Mark III,
IV, SK250 Mark IV, SK250LC Mark IV,
SK250NLC Mark IV, SK290LC Acera
Serial Nos:
SK220 Mark III: (45 Lk) 16-Bottom Rollers, 4-Carrier Rollers
SK220 Mark IV: (45Lk) 16-Bottom Rollers, 4-Carrier Rollers
SK220LC Mark III (HD U/C): (48LK) 16-Bottom Roller, (4) Top Roller
Note: HD Model, need to confirm link number for SK220LC Mark III
SK220LC Mark IV: (52 LK) 18-Bottom Rollers, 4-Carrier Rollers
Note: HD Model, need to confirm link number for SK220LC Mark IV
SK250 Mark IV: (45LK) 16-Bottom Rollers, 4-Carrier Rollers
SK250LC Mark IV (48LK) 18-Bottom Rollers, 4-Carrier Rollers
SK250NLC Mark IV: (48LK) 18-Bottom Rollers, 4-Carrier Rollers
SK290LC Acera: (50Lk) Hi & Wide U/C Only
Note: Verify OEM numbers with VPI numbers before ordering. Any
questions please call our customer service representatives

Your Track Groups
VCR5501/45HD Pin & Bushing Group 45Lk Sealed & Greased (For Old Style Chain E1627700S000)
VCR5497 Spacer
Track Hardware
Track Shoes
Page 464
Bottom Rollers
V24100J12446 24100J12446F1 Roller Assembly
V24100J12446V Roller Assembly (Optional)
Carrier Rollers
V24100N6603F1 24100N6603F1 Carrier Roller
V24100N6603V Carrier Roller (Optional)
V24100J12446 24100J12446F1 Carrier Roller Assembly (For SK290LC Acera Hi & Wide U/C)
V24100J12446V 24100J12446F1 Carrier Roller Assembly (For SK290LC Acera Hi & Wide U/C) (Optional)
VYN64D01022F1 Carrier Roller Assembly (For SK250 Mark VI, SK250LC Mark VI)
Idlers
V24100J12445 24100J12445F1 Idler W/Brackets
V24100J11697FV Idler W/Brackets (Optional)
VLB52D00002F1 Idler W/Brackets (For SK 290LC Acera Model)
Sprockets
V2404N417 2404N264 Sprocket 21-Tooth, 20-Bolt Hole
V2404N417V 2404N264 Sprocket 21-Tooth, 20-Bolt Hole (Optional)
Page 465
MODEL: Kobelco SK270 Mark III/IV, SK300 Mark III/IV,
SK300LC Mark III/IV, SK330 Mark IV
Specs Track Pitch = 8", Link Ht. = 117.6mm, Bushing Dia. =
66.65mm Bolt Diameter = 20mm
SK270 Mark III, IV: (48 LK) Bottom Rollers 14, Top Rollers 4
SK300 Mark III, IV: (48 LK) Bottom Rollers 14, Top Rollers 4
SK300LC Mark III, IV: (51 LK) Bottom Rollers 18, Top Rollers 4
SK330LC Mark IV: (51 LK) Bottom Rollers 18, Top Rollers 4
** Please Verify Track Pitch before ordering chains **

VKB270 Link Segment
V081406 Link, R/H
V081405 Link, L/H
V081401 Master Pin
VDY6300B0N23
VKB270 Link Segment
V081406 Link, R/H
V081405 Link, L/H
V081401 Master Pin
VDV158000N10 Spacer
Track Shoes
VLC60DU0003P1 Track Shoe, 2 B 700mm w/ Mud Hole
V82007 Track Shoe, 2 B 800mm w/ Mud Hole
V81516 Track Shoe, 3 B 700mm
V2415N372 Track Shoe, 3 B 800mm
Track Hardware
Bottom Rollers
VLC64DU0001F1 LC64DU0001F1 Roller Assembly
VLC64DU0001V Roller Assembly (Optional)
Carrier Rollers
V24100N8640F1 Carrier Roller (For Early Model SK300 Mark III. Roller Shell is Larger Dia. And Has No Lock
Pins On The Retainer)
V24100N8640V Carrier Roller (For Early Model SK300 Mark III. Roller Shell is Larger Dia. And Has No Lock
Pins On The Retainer) (Optional)
VLC64DU0002F1 LC64DU0002F1 Carrier Roller (For SK300 Mark IV Models and Later S/N SK300 Mark III. Roller Shell Is
Smaller Dia. And Retainer Has Lock Pins)
Idlers
VLC52DU0001F1 LC52DU0001F1 Idler With Brackets (For SK270, SK300 Models)
Page 466
VLC52DU0001FV LC52DU0001F1 Idler With Brackets (For SK270, SK300 Models) (Optional)
VLC52D00002F1 Idler With Brackets (For SK330 Mark III, IV Models)
Sprockets
V2404N431V 2404N431 Sprocket, 21T 26 B/H (8.5" Pitch)
VLC51DU1003P1 Sprocket, 21T 26 B/H (17 3/4" ID) Note: Use For Forestry Application w/ 8.5 Pitch Chains)
VLC53DU0001P1 Sprocket, 23T 26 B/H (17 1/4" ID) (Confirm I.D. before ordering) (SK270 IV,SK300 IV)
VLC53DU0001PV Sprocket, 23T 26 B/H (17 1/4" ID) (Confirm I.D.) (SK270 IV,SK300 IV) (Optional)
VLC51DU1001P1 LC51DU1001P1 Sprocket, 23T 26 B/H (17 3/4" ID) (Confirm I.D. before ordering) (SK300 IV)
Page 467
MODEL: Kobelco K914, K916, K916LC
Specs Track Pitch = 8.5", Link Height= 129mm, Bushing
O.D.= 71.4mm, Bolt Dia.= 22mm
K916LC: (49Lk)
K916LC:(53LK)

Your Track Groups
VKM1398 Sealed Pin
VKM804 Spacer
Track Hardware
V79035320 Track Nut
Track Shoes
Page 468
MODEL: Kobelco SK330 Acera, SK330LC Acera
Serial Nos: SK330 Acera (48 LK) Bottom Rollers 14, Top Rollers 4
SK330LC Acera (51 LK) Bottom Rollers 18, Top Rollers 4

VCR5926/48 Chain, 48L, Sealed & Greased, w/ Master Pin - Use V6Y2754HD & shorten to 48L
VCR5926/48V Chain, 48L, Sealed & Greased, w/ Master Pin - Use V6Y2754HDV & shorten to 48L
VCR5926/51 Chain, 51L, Sealed & Greased, w/ Master Pin - Use V6Y2754HD & add links to 51L
VCR5926/51V Chain, 51L, Sealed & Greased, w/ Master Pin - Use V6Y2754HDV & add links to 51L
Your Track Groups
V6Y2749HD Spacer
V6Y2749HD Spacer
Track Shoes
Page 469
Track Hardware
Bottom Rollers
VSI1000V VLC64D00005F1 Roller Assembly
Carrier Rollers
V24100N8640F1 Carrier Roller For Std U/C
V24100N8640V Carrier Roller For Std U/C (Optional)
VLC64D00005F1 Carrier Roller For Hi and Wide U/C
Idlers
VLC52D00002F1 Idler Group Complete
VSI1008V Idler Group Complete (Optional)
Sprockets
V2404N431V 2404N431 Sprockets
Page 470
MODEL: Kobelco SK400 Mark II, SK400LC Mark II
Specs Track Pitch = 8.5", Link Height= 129mm, Bushing
O.D.= 71.4mm, Bolt Dia.= 22mm
Serial Nos: SK400 Mark II: (49LK)
SK400LC Mark II: (53LK)

VMT14/53 Chain, 53L, Sealed, w/ Master Pin (AT132591)
Your Track Groups
VKM1398 Sealed Pin
VKM804 Spacer
Track Hardware
V79035320 Track Nut
Track Shoes
Page 471
MODEL: Kobelco SK400 Mark III/IV, SK400LC Mark III/IV

Serial Nos: SK400 Mark III, IV: (50LK)
SK400LC Mark III, IV: (53 LK)

VCR4235/50HD 24100J15227F2 Chain, 50L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/50HDV 24100J15227F2 Chain, 50L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
VCR4235/52HD Chain, 52L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/52HDV Chain, 52L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
VCR4235/53HD 24100J15227F1 Chain, 53L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/53HDV 24100J15227F1 Chain, 53L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1542TH Sealed Master Bushingg
VAT170096 Pin and Bushing Group, 53 LK
VCR1540HD Spacer
Track Hardware
V7H3599 Track Bolt, 7/8" (Use With Standard 2-Bar and 3-Bar 17.5mm Base Plate Track Shoe)
V171335A1 Track Bolt 22mm X 75mm (23mm Shoulder) (Use with 22.5mm Base Plate Track Shoe)
Track Shoes
Page 472
Bottom Rollers
VLS64DU0001F1 LS64DU0001F1 Roller Assembly S/F
VLS64DU00011V Roller Assembly S/F (Optional)
VLS64DU0001F2 LS64DU0001F2 Roller Assembly D/F
VLS64DU00012V Roller Assembly D/F (Optional)
Carrier Rollers
VLC64DU0002F1 LC64DU0002F1 Carrier Roller
Idlers
V24100J4658F4 LS52DU0001F1 Idler Group
Sprockets
V2404N257 LS53DU0001P1 Sprocket 25-Tooth, 24-Bolt Hole
V2404N257V LS53DU0001P1 Sprocket 25-Tooth, 24-Bolt Hole (Optional)
Page 473
MODEL: Kobelco SK480LC Acera
Serial Nos: SK480LC ACERA:

Your Track Groups
VLSSK480DRY Link Segment
Track Shoes
Track Hardware
Bottom Rollers
LSD6400001F2 Roller Assembly S/F
Carrier Rollers
V24100N8640F1 24100N7035F3 Carrier Rollers
V24100N8640V 24100N7035F3 Carrier Rollers (Optional)
Idlers
LS52D00002F1 Idler Group
Sprockets
LS51D01001P1 Sprocket
VKTA1069V Sprocket (Optional)
Page 474
MODEL: Koehring C166A, C451, C744
Serial Nos: C166A: (46Lk) 14-Bottom Rollers, 4-Carrier Rollers
C451: (46 LK) 14-Bottom Rollers, 4-Carrier Rollers
C744: (45 LK) 14-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR1732 Link L.H.
VCR1733 Link R.H.
VCR3196 Track Pin
VCR241 Bushing
VCR4873 Master Pin
Track Hardware
Track Shoes
VCR3226/20 Shoe, 3 B 500mm w/ Mud Hole
Bottom Rollers
VPC377 3018.43234 Roller Assembly
Carrier Rollers
VCR2880 3018.43232 Carrier Rollers
Idlers
VAT104 Idler Group
Sprockets
VCR1445 3018.43197 Sprocket Rim 23-Tooth
VCR1445V 3018.43197 Sprocket Rim 23-Tooth (Optional)
Page 475
MODEL: Koehring C166B, C4470G
Serial Nos: C166B: (46Lk) 14-Bottom Rollers, 4-Carrier Rollers
C4470G: (46LK) 14-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Track Hardware
Track Shoes
Bottom Rollers
VPC377 3018.43234 Roller Assembly
Carrier Rollers
Idlers
VAT104 Idler Group
Sprockets
VOK483 Sprocket Rim (For Repair)
VOK483V Sprocket Rim (For Repair) (Optional)
Page 476
MODEL: Koehring C260, C266
Specs Pitch= 171.1mm, Link Ht = 101.6mm, Bushing O.D. =
Serial Nos: C260: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers
C266: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR255 Sealed Pin
VCR1605 Master Pin
VPC57 Spacer
Track Hardware
Track Shoes
VCR3229/20 Shoe, 3 B 500mm
VCR3229/22 Shoe, 3 B 560mm
VCR3229/24 201039 Shoe, 3 B 600mm
VCR3229/28 Shoe, 3 B 700mm
VCR3229/30 Shoe, 3 B 750mm
VCR3229/36 Shoe, 3 B 900mm
Bottom Rollers
VKL18 3018.56491 Roller Assembly
VKL18V Roller Assembly (Optional)
Carrier Rollers
Idlers
VDE14 Idler Group
Sprockets
VOK391 3018.56494 Sprocket Rim
Page 477
MODEL: Koehring 6620, 6625
Specs Pitch = 175.4mm, Link Ht = 103.2 mm, Bushing OD =
Serial Nos: 6620: (53Lk) 16-Bottom Rollers
6625: (56Lk) 16-Bottom Rollers

Your Track Groups
VCR4798/53 Pin and Bushing Group, 53LK-Master Pin Type (Heat Treated pins)
VCR4795 Sealed Pin
VCR2163X Unsealed Bushing
VCR5094 Unsealed Master Bushing
VCR1605 Unsealed Master Pin
VCR2166 Seal Washer
VCR2165 Spacer
Track Hardware
V1M1408 Track
T k Shoe
Sh Nut,
N t 5/8"
Track Shoes
Bottom Rollers
VKL18 3018.56491 Roller Assembly (Verify part number as some models may vary)
VKL18V Roller Assembly (Optional) (Verify part number as some models may vary)
Carrier Rollers
Idlers
VDE14 Idler Group
Sprockets
Page 478
MODEL: Koehring C366
Specs Track Pitch = 202.8mm, Link Height = 117.5mm,
Bushing OD = 66.5mm, Bolt Hole= 3/4"
Serial Nos: C366: (47Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR1770 Link, R/H
VCR1771 Link, L/H
VCR1631 Master Pin
VD01070E0N10 Spacer
Track Hardware
V1S1859 Track Bolt 3/4" X 2.13/64
Track Shoes
Bottom Rollers
VLH27 3018.57768 Roller Assembly
Carrier Rollers
Idlers
Sprockets
VLH198 3018.57770 Sprocket Rim 23-Tooth
Page 479
MODEL: Koehring K625, K625L, 466E, 566, 6640, 666,
666E, 6644
Specs Track Pitch = 215.9mm, Link Height = 126 mm,
Bushing Dia.= 71.4mm Track Bolt Diameter =3/4"
Serial Nos: K625: (50Lk) 16-Bottom Rollers, 6-Carrier Rollers
K625L: (50Lk) 16-Bottom Rollers, 6-Carrier Rollers
566: (50LK) 16-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR4727 Sealed Pin
VCR4728 Sealed
S l dM Master Pin
t Pi
VCR1541 Seal Washer
VCR1540 Spacer
VCR5061/46HD Chain, 46L, Sealed & Greased w/ Master Pin
VCR5061/50HD Chain, 50L Sealed & Greased, w/ Master Pin
Your Track Groups
VCR4727HD Track Pin
VCR4728 Master Pin
Track Hardware
Track Shoes
Bottom Rollers
VLH27 3018.57768 Roller Assembly
VLH90 422V0054 Roller Assembly (For 6644, 666, 666E Models)
VLH90V Roller Assembly (For 6644, 666, 666E Models) (Optional)
Carrier Rollers
VCR2876 422V0039 Carrier Rollers
Page 480
Idlers
VKO76 422V0080 Idler Group With Brackets
VKO156V Idler Group HD With Brackets
VPV7464A0Y00 Idler Group (For Late 6644 Models)
Sprockets
Page 481
MODEL: Komatsu D21A, D21E, D21P, D21PL, D21Q,
D21S
Specs: Track Pitch = 135mm, Link Height = 75mm, Bushing
Diameter= 41mm, Bolt Diameter= 12mm
D21A-5, D21A-6, D21A-7:(37LK) 10-S/F Roller, 2-T/C Roller
D21E-6: (39LK) 12-S/F Roller, 2-T/C Roller
D21P-5, D21P-6, D21P-7:(39LK)
D21PL: (39LK)
D21Q-6, D21Q-7:(37LK)
D21S-5, D21S-6, D21S-7:(37LK)

VKM906/37 102-32-00032 Chain, 37L, Sealed, w/ Master Pin
VKM906/37V 102-32-00032 Chain, 37L, Sealed, w/ Master Pin (Optional)
VKM906/39V 103-32-00012 Chain, 39L, Sealed, w/ Master Pin (Optional)
Your Track Groups
VKM910/40 Pin & Bushing Group 40Lk Sealed Master Pin Type
VKM940 101-32-11131 Track Link R/H
VKM941 101-32-11121 Track Link L/H
VKM942 201-32-11151 Track Pin
VKM944 Track Bushing
VKM945 101-32-11173 Master Bushing
p
Your Track Groups
VKM910/45HD Pin & Bushing Group 45Lk Sealed & Greased
VKM940 101-32-11131 Link, R/H
VKM941 101-32-11121 Link, L/H
VKM942 201-32-11151) Track Pin
VKM950HD Spacer
Track Hardware
Bottom Rollers
VKM909 Roller Assembly S/F
VKM909V Roller Assembly S/F (Optional)
Carrier Rollers
VKM913 Carrier Rollers ( Currently Not Available)
Idlers
VKM914V 103-30-00030 Idler Group W/ Brackets
Sprockets
VKM911V 201-27-11530 Sprocket, 25-Tooth, **Splined**
VKM912V Sprocket Rim - Weld On, 25 Tooth
Page 482
MODEL: Komatsu D30A, D31A/E, D37E, D30S, D31S,
D31P, D31EX-21, D31PX-21, D37E
Specs: Track Pitch = 6.0126", Link Height = 87 mm, Bolt
Diameter= 14.3mm
Serial Nos: D30A-12(37LK)
D31A-15(37LK)
D30S-15(37LK)
D31S-16 up to Serial Number 32000 (37 LK)
D31P-16(41LK)
D31EX-21: (38Lk) - 10 Bottom Rollers
D31PX-21: (40Lk) - 12 Bottom Rollers
D37E - Serial Number 1001 up (41 LK)

VKM1098/37 111-32-00026 Chain, 37L, Sealed, w/ Master Pin (Bush. OD=45.2)
VKM1098/41 Chain, 41L, Sealed, w/ Master Pin (Bush. OD=45.2)
VKM401/37/350 Track Group, 37L, Sealed, w/ Master Pin, w/ 1 B 350mm Shoe
VKM277/37/330 Track Group, 37L, Sealed, w/ Master Pin w/ 3 B 330mm Shoe
Your Track Groups
VKM780/37 Pin & Bushing Group 37 LK With Master Pin
VKM273 Master Pin
VKM274 Spacer
VKM728/37 Chain, 37L, Sealed, w/ SML (Bushing OD=47.25mm)
VKM728/37V Chain, 37L, Sealed, w/ SML (Bushing OD=47.25mm) (Optional)
VKM728/41 Chain, 41L, Sealed, w/ SML (Bushing OD=47.25mm)
VKM728/41V Chain, 41L, Sealed, w/ SML (Bushing OD=47.25mm) (Optional)
VKM773/37/350 Track Group, 37L, Sealed, w/ SML, w/ 1 B 350mm Shoe
VKM773/37/600 111-820-0115 Track Group, 37L, Sealed, w/ SML, w/ 1 B 600mm Shoe
VKM773/41/400 11G-32-01505 Track Group, 41L, Sealed, w/ SML, w/ 1 B 400mm Shoe
VKM773/41600V Track Group, 41L, Sealed, w/ SML, w/ 1 B 600mm Shoe (Optional)
VKM774/41/400 11G-32-01304 Track Group, 41L, Sealed, w/ SML, w/ 3 B 400mm Shoe
Your Track Groups
VLSD31/1 Link Segment (D31 Size for Bushing OD=47.25mm)
VLSD31/2 Link Segment (D31 Size for Bushing OD=45.2mm)
VKM271 Pin (Both Sld and Sld w/SML)
VKM270 Bushing (Sld; Bushing OD=45.2 mm)
VKM769 Bushing (Sld; Bushing OD=47.25 mm)
VKM274 Spacer
VCR3014 Seal Washer
VKM240/39 Pin and Bushing Group, 39L, w/Master Pin (Bush OD = 45.2mm)
Page 483
VKM240/41 Pin and Bushing Group, 41L, w/Master Pin (Bush OD = 45.2mm)
VKM770/37 Pin and Bushing Group, 37L, (Bush. OD = 47.25mm)-Master Pin Type
VKM770/41 Pin and Bushing Group, 41L, w/SML (Bush. OD = 47.25mm)
VKM727/37 Chain, 37L, SALT, w/ SML (Bushing OD=47.25mm)
VKM727/37V Chain, 37L, SALT, w/ SML (Bushing OD=47.25mm) (Optional)
VKM727/41 Chain, 41L, SALT, w/ SML (Bushing OD=47.25mm)
VKM727/41V Chain, 41L, SALT, w/ SML (Bushing OD=47.25mm) (Optional)
VKM771/37/330 112-32-04106 Track Group, 37L, SALT, w/ SML, w/ 1 B 330mm Shoe
VKM771/37/350 Track Group, 37L, SALT, w/ SML, w/ 1 B 350mm Shoe
VKM771/41/400 11G-32-02146 Track Group, 41L, SALT, w/ SML, w/ 1 B 400mm Shoe
VKM772/37/400V Track Group, 37L, SALT, w/ SML, w/ 3 B 400mm Shoe (Optional)
VKM772/41/400 11G-32-02131 Track Group, 41L, SALT, w/ SML, w/ 3 B 400mm Shoe
Your Track Groups
VKM765 Master Link Complete, R.H. (2 pieces)
VKM766 Master Link Complete, L.H. (2 pieces)
VKM268 Track Link, R.H. (Bushing O.D. = 45.2)
VKM269 Track Link, L.H. (Bushing O.D. = 45.2)
VKM759 Track Link, R.H. (Bushing O.D. = 47.25)
VKM760 Track Link, L.H. (Bushing O.D. = 47.25)
VCR3618 Thrust Ring
VKM767 Pin (Lubricated)
VKM768 Bushing
VD31PLUG Plug Assembly (OEM Reference #112-32-E8131)
VKM757/37 Bushing Group, 37LK
Track Hardware
V203.32.21210 Track Shoe Bolt, M14 x 50mm
V110.32.11420 Track Shoe Nut M14 Hex (Confirm Nut Type)
V9691/03 Track Shoe Nut M14 SQ (Confirm Nut Type)
V112.32.21352 Master Bolt
Track Shoes
VKM1088/330 Shoe, 1 B 330mm
VKM1088/350 Shoe, 1 B 350mm
VKM1088/16 Shoe, 1 B 400mm
VKM1088/16CC Shoe, 1 B 400mm With Clipped Corners
VKM1088/24 Shoe, 1 B 600mm
VKM1088/24CC Shoe, 1 B 600mm With Clipped Corners
VKM276/330 Shoe, 3 B 330mm
VKM276/370 Shoe, 3 B 370mm
VKM276/400 Shoe, 3 B 400mm
Bottom Rollers
VKM388 Roller Assembly, S/F with Collars
VKM388V Roller Assembly, S/F with Collars (Optional)
VKM389 Roller Assembly, D/F with Collars
VKM389V Roller Assembly, D/F with Collars (Optional)
VKM410 Roller Shell, S/F, w/ bushing
VKM411 Roller Shell, D/F, w/ bushing
Page 484
V140.30.00141 140.30.00041 Seal Group
VKM2162 Bushing
VKM2435 O-Ring-Metal Face Seal
VTR0004 O-Ring-Shaft
Carrier Rollers
VKM574 Carrier Roller Assembly (SN15008-32000)-44mm diameter Shaft (Press Fit)
VKM778 Carrier Roller Assembly (SN32001 & up)-Threaded Bolt Mount (Doesn't fit EX21 & PX21)
VKM575 Carrier Roller Shell
V140.30.00141 140.30.00041 Seal Group
Idlers
VKM840 Front Idler Group Complete (Will not fit D31EX-21 or D31PX-21)
VKM840V Front Idler Group Complete (Optional) (Will not fit D31EX-21 or D31PX-21)
VKM576 Front Idler with Shaft
VKM577 Idler Shell
N/A 11Y-30-00010 Idler Group (OEM - To fit D31EX-21 & D31PX-21)
V140.30.00141 140.30.00041 Seal Group
VKM665 Bushing Assembly
Sprockets
VKM390 Sprocket (Press On Type) (If out of stock use KM391)
VKM391 Sprocket Rim (Weld On) **For Small Bushing O.D. Track Chain only**
VKM781 Sprocket, 25 Teeth (Bolt on Type) D37E **For Large Bushing O.D. Track Chain**
VKM781V Sprocket, 25 Teeth (Bolt on Type) D37E **For Large Bushing O.D. Track Chain** (Optional)
V11Y.2711531V 11Y-27-11531 Sprocket (Models D31EX-21 & D31PX-21)
Page 485
MODEL: Komatsu D32E, P, D38E,P, D39E,P
Specs: Track Pitch = 6.5", Link Height = 97.5 mm, Bushing
OD 53.8mm Bolt Diameter= 9/16
Serial Nos: D32E(34 LK) (10) S/F Roller, 2-T/C Roller
D32P(37LK) (10) S/F Roller, (2) T/C Roller
D38E,P:(37 LK) (12) S/F Roller, (2) T/C Roller
D39E,P:(39 LK) (12) S/F Roller, (2) T/C Roller

VIN3450/39 Chain, 39L, SALT
VIN3488/34/15 1237162H93 Track Group, 34L, SALT, w/ SML, w/ 1 B 15" Shoe
VIN3488/3415V 1237162H93 Track Group, 34L, SALT, w/ SML, w/ 1 B 15" Shoe (Optional)
Your Track Groups
VIN3502 Master Link Complete, R.H.-Bolt Diameter=9/16"
VIN3503 Master Link Complete, L.H.-Bolt Diameter=9/16"
VCR3575 Thrust Ring
VIN3471 Track Link, R.H., Link Height = 97.5 mm-Bolt Diameter=9/16"
VIN3472 Track Link, L.H., Link Height = 97.5 mm-Bolt Diameter=9/16"
Track Hardware
V616199C1 Track Shoe Bolt, 9/16
V7K2017 Track Shoe Nut, 9/16
Page 486
VD0207000N35 Master Link Bolt-Long (4- Needed)
Track Shoes
VIN3451/15 Shoe, 1 B 15"
VIN3451/16 Shoe, 1 B 16"
VIN3451/17 Shoe, 1 B 17"
VIN3451/18 Shoe, 1 B 18"
VIN3451/20 Shoe, 1 B 20"
VIN3451/24 Shoe, 1 B 24"
Bottom Rollers
VIN2808 621481C94 Roller Assembly, SF (For D39E/P)
VIN2808V 621481C94 Roller Assembly, SF (For D39E/P) (Optional)
VIN3490 662822C93 Roller Assembly, SF (For D32E/P, D38E/P)
Carrier Rollers
VIN3511 Carrier Roller Assembly
VIN3511V Carrier Roller Assembly (Optional)
Idlers
VIN3802V 1280499H92 Front Idler Group w/ Brackets D32E,P D38E, P
VIN3810V 1280471H92 Front Idler Group w/ Brackets D39E, P
Sprockets
VIN3491 741191C2 Sprocket D32E,P D38E, P
VIN3491V 741191C2 Sprocket D32E,P D38E, P (Optional)
VIN3492 121902H2 Sprocket D39E, P
VIN3492V 121902H2 Sprocket D39E, P (Optional)
Page 487
MODEL: Komatsu: D39EX-21, D39PX-21, D41E-6,
D41P-6
Specs: Pitch= 6.75", Link Height=98mm, Bushing O.D.= 55.9,
Bolt Hole= 5/8"
Serial Nos: D39EX-21 (39Lk)
D39PX-21 (39Lk)
D41E-6 (41Lk) 12-Bottom Rollers, 2-Carrier Rollers
D41P-6 (44Lk) 14-Bottom Rollers, 2-Carrier Rollers
Note: If Customer is using CR5552 or CR5192 Chains they cannot use OEM
Rollers

VCR4341/4428V Track Group, 44L, SALT, w/ SML, w/ 1 B 28" Shoe
Your Track Groups
VCR3573 Salt Pin (Reference 6Y9260)
VCR4355 Thrust Ring
Track Shoes
VCR4358/20 Shoe, 1 B 20"
VCR4358/22 Shoe, 1 B 22"
VCR4358/24 Shoe, 1 B 24"
VCR4358/26 Shoe, 1 B 26"
VCR4358/28 Shoe, 1 B 28"
VCR4358/30 Shoe, 1 B 30"
No Master Shoe on D4H
Track Hardware
V9G3110 Track Shoe Bolt, 5/8" X 2.1/4"
V7H3597 Track Shoe Bolt, 5/8" X 2.1/8" Use With OEM Track Shoes
" If Original Cat Chains Use 2- 9G8592 & 2-3T8601 per chain.
V3P2274 Master Link Bolt-Long (2 required) ITM Chain
V3T8601 Master Link Bolt-Short (2 required) ITM Chain
Page 488
V1A8537 Roller Mounting Bolt Series III
V5P8247 Washer
Note: Do not mix with OEM Rollers, must replace complete sets
VKM2379V Carrier Roller Assembly (Qty 2)
Idlers
V124.3000105V 124-30-00105 Idler Group (D39EX-21, D39PX-21)
V124.3000103V 124-30-00103 Idler With Brackets (For D41E-6 S/N up to B20980 and D41P-6 S/N up to B20983)
Sprockets
V11Y.27.11510 11Y-27-11510 Sprocket (D39EX-21, D39PX-21)
VKM2465 124-27-51155 Sprocket (For D41E-6, D41P-6 With S/N 20501-Up)
VKM2465V Sprocket (For D41E-6, D41P-6 With S/N 20501-Up) (Optional)
Page 489
MODEL: Komatsu D40A-1,D40P, D40P-3, D41A,E,P,S,Q-
3, D45A,E-1, D45S-1, D45P-1, D50A,S,P,PL,
D53A,S,P-16, D53A,S,P-17, D58E,P-1, D63E-1
Pitch= 6.906, Link Height=102mm, Bushing O.D.= 55

& 58.5mm, Bolt Hole= 5/8"
D40A-1: 3201-UP (37LK)
D40P, PL: 3501-UP (43LK)
D40PLL: 3501-UP (46LK)
D40P-3: 6001-UP (43LK)
D41A,S,Q-3: 6001-UP (37LK) 6-S/F, 4-D/F, 2-T/C
D41E-3: 6001-UP (39LK)
D41P-3: 6001-UP (43LK)
D45S-1: 2101-UP (39LK)
D45P-1: 3501-UP (43LK)
D45E-1: 3201-UP (39LK)
D45A-1:3201-UP (37LK)
D50A, F, S-16: 68001-UP (39LK)
D50P, PL-16:68001-80000 (47LK)
D53A, S-16: 68001-80000 (39LK)
D53P-16: 68001-80000 (47LK)
D53A-17: 80001-UP (41LK)
D53P-17: 80001-UP (49LK)
D53S-17: 80001-UP (39LK)
D58E-1: 80888-UP
D58E 1: 80888 UP (41LK)
D58E-1A: 81651-Up (42LK)
D58P-1: 80588-UP (49LK)
D63E-1: 1001-UP (42LK) 8 S/F, 4 D/F, 4 T/C
Sealed w/MP Chains and Track Groups

VKM62/39 Chain, 39L, Sealed, w/ Master Pin (55mm OD Bushing) Note: Use 131.32.00037
VKM62/40 Chain, 40L, Sealed, w/ Master Pin (55mm OD Bushing) Note: Use Step Bushing Chains
VKM62/41 Chain, 41L, Sealed, w/ Master Pin (55mm OD Bushing) Note: Use Step Bushing Chains
VKM60/39/18 Track Group, 39L, Sealed, w/ Master Pin, w/ 1 B 18" Shoe
Your Track Groups
VKM43/39 Pin & Bushing Group 39 LK With Master Pin
VKM45 130-32-11126 Link R.H..
VKM44 130-32-11136 Link L.H..
VKM66 Pin
VKM47 Bushing
VKM71 Spacer
VKM70 Seal Washer
Sealed w/MP & Step Bushing Chains and Track Groups
V131.32.00037 Chain 39LK Sealed w/Master Pin (59.5mm OD Step Bushing)
V12F.32.00044 Chain 43LK Sealed w/Master Pin (59.5mm OD Step Bushing)
V13F.32.00062 Chain 49LK Sealed w/Master Pin (59.5mm OD Step Bushing)
Your Track Groups
Page 490
VKM45 130-32-11126 Link R.H..
VKM44 130-32-11136 Link L.H..
VKM66 Pin
VKM863 Track Bushing (59.5mm Step Bushing)
VKM70 Seal Washer
VKM861/37 Chain, 37L, Sealed, w/ SML (58.5mm OD Bushing)
VKM861/39 Chain, 39L, Sealed, w/ SML (58.5mm OD Bushing)
VKM861/49V Chain, 49L, Sealed, w/ SML (58.5mm OD Bushing) (Optional)
VKM864/37/18 124-32-02204 Track Group, 37L, Sealed, w/ SML, w/ 1 B 18" Shoe
Your Track Groups
VKM862/39 Pin & Bushing Group 39LK
VKM45 Link R.H..
VKM44 Link L.H..
VKM863 Bushing
VKM66 Pin
VKM70 Seal Washer
VKM489/37 Chain, 37L, SALT, w/ SML (58.5 OD Bushing)
VKM489/41V Chain, 41L, SALT, w/ SML (58.5 OD Bushing) (Optional)
VKM489/42 Chain, 42L, SALT
Ch i 42L SALT, w// SML (58.5
(58 5 OD Bushing)
B hi )
VKM489/49V Chain, 49L, SALT, w/ SML (58.5 OD Bushing) (Optional)
VKM490/37/18 124-32-02412 Track Group, 37L, SALT, w/ SML, w/ 1 B 18" Shoe
VKM490/41/20 Track Group, 41L, SALT, w/ SML, w/ 1 B 20" Shoe
VKM490/49/34 13F-32-01642 Track Group, 49L, SALT, w/ SML, w/ 1 B 34" Shoe
VKM491/37/16 124-32-02462 Track Group, 37L, SALT, w/,SML, w/ 3 B 16" Shoe
Your Track Groups
VKM506/39 Pin & Bushing Group 39LK SALT
VKM45 130-32-11126 Link R.H..
VKM44 130-32-11136 Link L.H..
VKM502 130-32-21151 Pin lubricated
VKM503 130-32-21141 Bushing
VKM744 130-32-21190 Thrust Ring
VKM741 130-32-21160 Seal Assembly
VCR3433 Plug w/Stopper
VKM504 Master Link R.H..
VKM505 Master Link L.H..
Track Hardware
V7H3597 Track Bolt 5/8X2.1/8
V1M1408 Track Nut 5/8
V130.32.21252 Master Bolt (4 Needed, For Sorefa/ITM Chains)
Page 491
V3P2274 Master Link Bolt (5/8" x 3 25/32") (2 needed) For Berco Chains Only
V616207C1 Bolt 5/8X2.3/8" For Berco Chains Only
Track Shoes
VKM259/18 130-32-11280 Shoe, 1 B 18"
VKM259/18V 130-32-11280 Shoe, 1 B 18" (Optional)
VKM259/20 130-32-11270 Shoe, 1 B 20"
VKM259/28 Shoe, 1 B 28"
VKM259/34 13F-32-21210 Shoe, 1 B 34"
VKM241/16 130-32-11312 Shoe, 3 B 16"
Carrier Rollers
VKM103 Carrier Roller Assembly
VKM103V Carrier Roller Assembly (Optional)
Bottom Rollers
VKM859 Bottom Roller, SF
VKM859V Bottom Roller, SF (Optional)
VKM860 Bottom Roller, DF
VKM860V Bottom Roller, DF (Optional)
VKM852 Roller Shell, SF
VKM853 Roller Shell, DF
Idlers
VKM841 Front Idler w/ Brackets (D40A,P,PL,PLL-1/ D40A,E,F,P,PL,Q,S-3/ D41A,E,F,S,Q-3/
D45A,E,S-1)
VKM787 Front Idler Less Brackets(Same Models As Above)
VKM842 Front Idler w/Brackets (D53, D58, D63 Models)
Note: D58E & P-1B, S/N 80588-Up With Power Angle, Power Tilt Blade Takes Different
Idler Groups. Please Confirm Before Selling The KM842 Idlers. (13F-30-00250 & 13F-30-
00260)
Sprockets
VKM788 Sprocket Group
VKM788V Sprocket Group (Optional)
V09203.21860 Segment Bolt (27) required
V01803.11824 Segment Nut (27) required
Page 492
MODEL: Komatsu D55S-2, D55S-3, D57S-1, 1B, D60A-3.
D60E-3
Specs: Track Pitch = 7.484", Link Height = 105 mm, Bushing
O.D. = 60mm, Bolt Diameter=18mm
Serial Nos:
D55S-2:(36LK)
D55S-3(36LK)
D57S-1: 06501-Up (39Lk)
D57S-1B: 20001-Up (39Lk)
D60A-3:(38LK)
D60E-3: (41LK)

Your Track Groups
VKM72/41 Pin & Bushing Group 41 Lk Sealed With Master Pin
VKM54 Link R/H
VKM53 Link L/H
VKM66 Track Pin
VKM67 Master Pin
VKM68 Track Bushing
VKM71 Spacer
VKM70 Seal Washer
Track Hardware
V70598391 Track Shoe Bolt 18mm
Track Shoes
VKM1080/400 Shoe, 3 B 400mm w/ Mud Hole
VKM1080/440NM Shoe, 3 B 440mm w/o Mud Hole
Carrier Rollers
VKM103 131-30-00316 Carrier Roller Assembly
VKM103V 131-30-00316 Carrier Roller Assembly (Optional)
Bottom Rollers
VKM859 131-30-56100 Bottom Roller, SF (Can use to replace 131-30-00343)
VKM859V 131-30-56100 Bottom Roller, SF (Can use to replace 131-30-00343) (Optional)
VKM860 131-30-56200 Bottom Roller, DF (Can use to replace 131-30-00353)
VKM860V 131-30-56200 Bottom Roller, DF (Can use to replace 131-30-00353) (Optional)
VKM852 Roller Shell, SF
VKM853 Roller Shell, DF
Idlers
VKM282 130-30-00086 Idler With Shaft (For D57S-1, 1B only)
VKM842 Front Idler w/Brackets (D55S, D60A-3 Models)
Sprockets
VKM393 Segment Group D55S
VKM347 Segment Group D57S, D60A-3, S, D63E-1
V09203.21860 Segment Bolt
V01803.11824 Segment Nut
Page 493
MODEL: Komatsu D61EX-12, D61PX-12
Specs: Track Pitch = 7.484", Link Height = 119mm, Bushing
O.D. = 65mm, Bolt Diameter=20mm
Serial Nos:
D61EX-12: (40Lk) 8-S/F Rollers, 4-D/F, 4- Carrier Rollers
D61PX-12: (46Lk) 16-Bottom Rollers, 4-Carrier Rollers
SALT Chains and Track Groups

VKM2868/40 134-32-00020 Chain, 40L, SALT, w/ SML
VKM2868/40V 134-32-00020 Chain, 40L, SALT, w/ SML (Optional)
VKM2868/46 13G-32-00010 Chain, 46L, SALT, w/ SML
VKM2868/46V 13G-32-00010 Chain, 46L, SALT, w/ SML (Optional)
Your Track Groups
VKM3357/46V Pin & Bushing Group
Track Hardware
V79035814 Track Bolt, 20mm X 60mm With Washer Head
V134.32.61310 Master Bolt (4 required)
Track Shoes
VKM2611/600 134-32-61110 Shoe, 1 B 600mm (Standard)
VKM2611/860 13G-32-61110 Shoe, 1 B 860mm (Standard)
VID1705/600 Shoe, 1 B 600mm w/ Clipped Corners and Mud-Hole (Alternative)
VID1705/600V Shoe, 1 B 600mm w/ Clipped Corners and Mud-Hole (Alternative) (Optional)
Carrier Rollers
VKM2872 134-30-00110 Carrier Rollers
Bottom Rollers
VKM2870 131-30-00342 Roller Assembly S/F
VKM2870V Roller Assembly S/F (Optional)
VKM2871 131-30-00352 Roller Assembly D/F
VKM2871V Roller Assembly D/F (Optional)
Idlers
V134.3000200V 134-30-00200 Idler With Brackets
Sprockets
VKM2874V Segment Group
VKM2874V Segment Group (Optional)
Page 494
MODEL: Komatsu D60A-6/7&8, D60E-7&8, D60F-7&8,
D60-P-7&8, D60PL-7&8, D60S-7&8, D65A-6/7&8,
D65E-6/7&8, D65P-7&8, D65S-7&8, D66S, D68E,
D68P, D75A-1
Specs: Track Pitch = 7.984", Link Height = 116mm, Bolt
Diameter= 3/4"
Serial Nos: D60A-6, S/N 20000-32000 (Use 66.8mm Bushing Chain): (37LK) 8-S/F
D60A-6, S/N 32001-40000: (37Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier
Rollers
Rollers
Rollers
D60A-8, S/N 45409-Up: (37Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
D60E-7, S/N 40001-45000: (39Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier

Rollers
Rollers
Rollers
D60F-7, S/N 40001-45000: (37Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier
Rollers
D60F-8, 45001-Up:
D60F 8 S/N 45001 8-S/F
Up: (37Lk) 8 Rollers, 4
S/F Rollers 4-D/F Rollers, 4
D/F Rollers 4-Carrier
Carrier Rollers
D60P-7, S/N 40001-45000: (44Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier

Rollers
Rollers
D60P-8, S/N 45205-Up: (44Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D60PL-7: (49Lk) 12-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

D60PL-8: (49Lk) 12-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D60S-7: (39Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
D65A-6, S/N 20006-32000 (Use 66.8mm Bushing Chain): (37Lk) 8-S/F
Rollers
D65A-7: (37Lk) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
Rollers
D65E-6: (39Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers

D65E-7: (39Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D65E-8 S/N 45001-47629: (39Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
D65E-8 S/N 47630-60000: (39Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
D65P-7: (44Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
Page 495
Rollers
Rollers
D66S-1: (39 LK) 8-S/F Rollers, 4-D/F Rollers, 2-Carrier Rollers
D68E-1: (40 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D68P-1: (44 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
D75A-1, S/N 10001-50328: (40 LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
Sealed w/ Master Pin Chains and Track Groups

VKM953/39 Chain, 39L, Sealed, w/ Master Pin (Bush OD=66.8mm)
VKM953/44V Chain, 44L, Sealed, w/ Master Pin (Bush OD=66.8mm) (Optional)
VKM1012/40/22 Track Group, 40L, Sealed, w /Master Pin, w/ 1 B 22" Shoe
VKM1012/40/26 p 40L, Sealed, w /Master Pin, w/ 1 B 26" Shoe
Track Group,
Your Track Groups
VKM154/39 Pin and Bushing Group, 39L (Master Pin Chains)
VKM154/44 Pin and Bushing Group, 44L (Master Pin Chains)
VKM170 Bushing (Sealed Chains)
VCR1632 Spacer
VCR1630 Seal Washer
Sealed and Greased w/Master Pin
V141.32.00046 Chain, 39L, Sealed & Greased w/Master Pin
Your Track Groups
Sealed w/ SML Chains and Track Groups
VKM1268/37 144.32.00031 Chain, 39L, Sealed, w/ SML (Bush OD=70mm)
VKM1268/49 14F-32-00021 Chain, 49L, Sealed, w/ SML (Bush OD=70mm)
VKM1292/37/20 144.32.01010 Track Group, 37L, Sealed, w/ SML, w/ 1 B 20" Shoe
Page 496
VKM1293/39/22 Track Group, 39L, Sealed, w/ SML, w/ 1 B 22" Shoe ESS
VKM1293/40/22 144.32.02760 Track Group, 40L, Sealed, w/ SML, w/ 1 B 22" Shoe ESS
VKM1293/44950 14G.32.01005 Track Group, 44L, Sealed, w/ SML, w/ 1 B 38" Shoe ESS
Your Track Groups
VKM1269/39 Pin and Bushing Group, 39L (SML Chains)
VKM1291/39 Pin and Bushing Group, 39L (MP Chains)-**For OEM Track Chain Only
VKM169 Pin (Sealed Chains)
VKM1289 Bushing
VCR1630 Seal Washer
VLSD65DRY Link Segment (Bushing O.D. 66.8)-Sealed
VLSD65DRY1 Link Segment (Bushing O.D. = 69.8mm)-Sealed
VKM951/39 141-32-00061 Chain, 39L, SALT, w/ SML (Bush OD=69.8mm)
VKM951/39V 141-32-00061
141 32 00061 Chain, 39L, SALT
Chain 39L SALT, w/ SML (Bush OD=69.8mm)
OD=69 8mm) (Optional)
VKM951/40 Chain, 40L, SALT, w/ SML (Bush OD=69.8mm)
VKM951/40V Chain, 40L, SALT, w/ SML (Bush OD=69.8mm) (Optional)
VKM951/44V Chain, 44L, SALT, w/ SML (Bush OD=69.8mm) (Optional)
VKM1010/39/20 144.32.04665 Track Group, 39L, SALT, w/ SML, w/ 1 B 20" Shoe
VKM1009/44950 14G-32-01214 Track Group, 44L, SALT, w/ SML, w/ 1 B 38" Shoe ESS
Your Track Groups
VKM418 Pin (Lubricated Chains)
VKM419 Bushing (Lubricated Chains)
VCR3321 Thrust Ring
Page 497
VKM751/39 Bushing Group, 39LK
Track Hardware
V144.32.21342 Master Bolt (4 needed)
Track Shoes
VKM155/20 144.32.11112 Shoe, 1 B 20"
VKM155/22 Shoe, 1 B 22"
VKM155/24 Shoe, 1 B 24"
VKM155/24V Shoe, 1 B 24" (Optional)
VKM155/26 Shoe, 1 B 26"
VKM155/26V Shoe, 1 B 26" (Optional)
VKM155/36 Shoe, 1 B 36"
VKM155/38 Shoe, 1 B 38"
VKM509/22 Shoe, 1 B 22" ESS
VKM509/950 Shoe, 1 B 38" ESS
VKM507/18 Shoe, 2 B 18"
VKM507/20 Shoe, 2 B 20"
VKM156/18 Shoe, 3 B 18"
Bottom Rollers
VKM116 141-30-00577 Roller Assembly, S/F with Collars-18mm Mounting Bolt Diameter
VKM116V 141-30-00577 Roller Assembly, S/F with Collars-18mm Mounting Bolt Diameter (Optional)
VKM117 141-30-00587 Roller Assembly, D/F with Collars-18mm Mounting Bolt Diameter
VKM117V 141-30-00587 Roller Assembly, D/F with Collars-18mm Mounting Bolt Diameter (Optional)
Must Confirm Bolt Hole Size - VKM116 & VKM117 require 18mm Bolt
VKM159 Roller Shell, S/F
VKM160 Roller Shell, D/F
VKM231 Key
V5F8000 O-Ring-Shaft
V9B2289 Pin
VKM655 O-Ring
VLA131 O-Ring
V01010-61865 Bolt 18mm X 65mm
VFT383 Lock Washer
VKM2101 14X-30-14100 Bottom Roller S.F. (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8 S/N:
45205-Up, D65A-8 S/N: 46048-Up, D65E-6, D65E-8 S/N: 47630-60000, D65P-8 S/N: 46288-
60000 Models)
VKM2101V Bottom Roller S.F. (Optional) (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-
8 S/N: 45205-Up, D65A-8 S/N: 46048-Up, D65E-6, D65E-8 S/N: 47630-60000, D65P-8 S/N:
46288-60000 Models)
VKM2102 14X-30-14200 Bottom Roller D.F. (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8 S/N:
45205-Up, D65A-8 S/N: 46048-Up, D65E-6, D65E-8 S/N: 47630-60000, D65P-8 S/N: 46288-
60000 Models)
VKM2102V Bottom Roller D.F. (Optional) (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-
8 S/N: 45205-Up, D65A-8 S/N: 46048-Up, D65E-6, D65E-8 S/N: 47630-60000, D65P-8 S/N:
46288-60000 Models)
Must Confirm Bolt Hole Size - VKM2101 & VKM102 require 20mm Bolt
Carrier Rollers
VKM118V 141-30-00566 Carrier Roller Assembly (Optional)
VKM161 Carrier Roller Shell
Page 498
VKM2105 14X-30-00141 Carrier Roller (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8 S/N: 45205-
Up, D65A-8 S/N: 46048-Up, D65E-8 S/N: 47630-60000, D65P-8 S/N: 46288-60000)
VKM2105V Carrier Roller (Optional) (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8
S/N: 45205-Up, D65A-8 S/N: 46048-Up, D65E-8 S/N: 47630-60000, D65P-8 S/N: 46288-
60000)
Idlers
VKM834 144-30-00038 Front Idler Group Complete D60, D65, D68
VKM834V Front Idler Group Complete (Optional) D60, D65, D68
VKM348 Front Idler with Shaft All including D66S
VKM215 Idler Shell
Sprockets
VKM162 Segment Group
VKM162V Segment Group (Optional)
V155.27.12181 Segment Bolt (27 needed)
V01803.02228 Segment Nut (27 needed)
VKM119 141-98-00141 Sprocket Rim (Old Style D60A S/N: Up To 32000, D65A-6 S/N: 20006-32000)
VKM2111 Segment Group (27 tooth) (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8
60000)
VKM2111V Segment Group (27 tooth) (For D60A-8 S/N: 45409-Up, D60E-8 S/N: 47641-60000, D60P-8
60000) (Optional)
V155.27.12181 Segment Bolt 22 mm (27 Needed)
V01803.02228 Segment Nut 22 mm (27 Needed)
Page 499
MODEL: Komatsu D65EX-12, D65PX-12, D65EX-15,
D65PX-15, D65WX-15
O.D. = 73mm
Serial Nos: Bolt Diameter=20mm
D65EX-12: Serial Number 6001-up (39LK) 10-S/F Rollers, 4-D/F Rollers, 4-
Carrier Rollers
D65PX-12 LGP:Serial Number 6001-up (45LK) 12-S/F Rollers, 4-D/F Rollers,
4-Carrier Rollers
D65EX-15: (39LK)
D65PX-15: (45LK)
D65WX-15: (39LK)
Confirm Number of Links Before Ordering

VKM2095/39 14X-32-00100 Chain, 39L, Sealed and Greased, w/ Master Pin
VKM2095/45 14Y-32-00100 Chain, 45L, Sealed and Greased, w/ Master Pin
VKM2095/45V 14Y-32-00100 Chain, 45L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
VKM2259/39HD Pin & Bushing Group 39LK Sealed w/ Polyurethane seals Master Pin
VD40653E0N00 Master Pin Complete With Master spacer
V14X.32.11270 14X-32-11270 Master Bushing
VCR1630HDM 144-32-11240 Polyurethane Seal "M" Type
VCR1632HDM Master Seal Polyurethane "M" Type
VKM2094/39 14X-32-00010 Chain, 39L, SALT, w/ SML
VKM2094/39V 14X-32-00010 Chain, 39L, SALT, w/ SML (Optional)
VKM2094/45 14Y-32-00020 Chain, 45L, SALT, w/ SML
VKM2094/45V 14Y-32-00020 Chain, 45L, SALT, w/ SML (Optional)
VKM2097/39560 14X-32-01110 Track Group, 39L, SALT, w/ SML, w/ 1 B 560mm Shoe
VKM209739560V 14X-32-01110 Track Group, 39L, SALT, w/ SML, w/ 1 B 560mm Shoe (Optional)
VKM2097/39610 14X-32-01120 Track Group, 39L, SALT, w/ SML, w/ 1 B 610mm Shoe
VKM209739610V 14X-32-01120 Track Group, 39L, SALT, w/ SML, w/ 1 B 610mm Shoe (Optional)
VKM2097/39660 Track Group, 39L, SALT, w/,SML, w/ 1 B 660mm Shoe
VKM209739660V Track Group, 39L, SALT, w/,SML, w/ 1 B 660mm Shoe (Optional)
VKM2097/45915 14Y-32-01110 Track Group, 45L, SALT, w/ SML, w/ 1 B 915mm Shoe
VKM209745915V 14Y-32-01110 Track Group, 45L, SALT, w/ SML, w/ 1 B 915mm Shoe (Optional)
Your Track Groups
Note: Measure track pin length to insure correct Pin & Bushing's are ordered.
VKM2259/39 Pin & Bushing Group 39LK SALT (Not for OEM - OEM Pin Length is 9.9" or 251.46mm)
VKM2236 Link R.H. (Height 125 mm)
VKM2237 Link L.H. (Height 125 mm)
VKM1187 144-32-21151 Pin Lubricated (O.D. 44.6 mm - Pin Length 236.2mm)
VKM2242 14X-32-11140 Bushing (O.D. 73 mm)
VCR3321 Thrust Ring
VKM2247 14X-32-11350 Master Bolt (4-Required) 20mm X 105mm
VKM2343 14X-32-11420 Master Link R.H.. (2 Pieces)
VKM2344 14X-32-11320 Master Link L.H.. (2 Pieces)
Track Hardware
Page 500
V79035814 Track Bolt w/Washer Head 20 mm X 60mm
V14X.32.11220 Track Nut 20mm Hex (Special) For OEM Non-Strutted Links With Round Pocket) (ITM)
V01803.02026 Track Nut 20mm Hex (For Strutted Links) (Use with V-Track Chains)
Track Shoes
VKM2093/560 14X-32-11360 Shoe, 1 B 560 mm Bolt Hole 20 mm
VKM2093/610 14X-32-11370 Shoe, 1 B 610 mm Bolt Hole 20 mm
VKM2093/610V 14X-32-11370 Shoe, 1 B 610 mm Bolt Hole 20 mm (Optional)
VKM2093/660 Shoe, 1 B 660 mm Bolt Hole 20 mm
VKM2093/660V Shoe, 1 B 660 mm Bolt Hole 20 mm (Optional)
VKM2093/915 Shoe, 1,B 915 mm Bolt Hole 20 mm
VKM2093/915V Shoe, 1 B 915 mm Bolt Hole 20 mm (Optional)
V46424CV Shoe, 1 B 610 mm ESS Bolt Hole 20 mm
Bottom Rollers
VKM2101 14X-30-14100 Bottom Roller S.F.
VKM2101V Bottom Roller S.F. (Optional)
VKM2102 14X-30-14200 Bottom Roller D.F.
VKM2102V Bottom Roller D.F. (Optional)
Carrier Rollers
VKM2105 14X-30-00141 Carrier Roller
VKM2105V Carrier Roller (Optional)
Idlers
VKM2107 14X-30-00110 Front Idler w/Brackets
Note: Idler does not include shims and side plates
VKM2107V Front Idler w/Brackets (Optional)
Sprockets
VKM2111 14X-27-11511 Segment Group (27 tooth)
VKM2111V 14X-27-11511 Segment Group (27 tooth) (Optional)
V155.27.12181
V155 27 12181 Segment Bolt 22 mm (27 Needed)
Page 501
MODEL: Komatsu D75S-2, D75S-3, D75S-5, D80A-7,
D80A, E, P-12, D83E, P-1, D85A, E-12, D85A, E,
P-21, D95S-1, D95S-2
O.D =74.6 mm. Bolt Dia. = 20 mm
Serial Nos: D75S-2:(37 LK) 12-Bottom Rollers, 4-Carrier Rollers
D75S-3:(38 LK) 14-Bottom Rollers, 4-Carrier Rollers
D80A, E, P-12:(38 LK), (41 LK), (41 LK)
D83E-1:(40 LK) 14-Bottom Rollers, 4-Carrier Rollers
D83P-1: (42Lk) 16-Bottom Rollers, 4-Carrier Rollers
D85A, E-12: (38Lk) 12-Bottom Rollers, 4-Carrier Rollers
D85A-21: (39Lk) 14-Bottom Rollers, 4-Carrier Rollers
D85E-21: (41Lk) 14-Bottom Rollers, 4-Carrier Rollers
D85P-21: (45Lk) 16-Bottom Rollers, 4-Carrier Rollers

VKM1103/40V Chain, 40L, Sealed, w/ Master Pin (Optional)
VKM1103/41V Chain, 41L, Sealed, w/ Master Pin (Optional)
**Call
Your Track Groups
VKM310 Link, R/H
VKM311 Link, L/H
Sealed w/ SML Chains and Track Groups
VKM494/38 Chain, 38L, Sealed, w/ SML
VKM527/38/22 Track Group, 38L, Sealed, w/ SML, w/ 1 B 22" Shoe
Your Track Groups
VKM530/41 Pin & Bushing Group 41 LK Sealed
VKM310 154-32-11137 R.H. Link
VKM311 154-32-11127 L.H. Link
VKM312 154-32-11152 Track Pin
VCR1541 Seal Washer
VKM478/38/22 Track Group, 38L, SALT, w/ SML, w/ 1 B 22" Shoe (D80A)
Your Track Groups
VKM460/37 Pin and Bushing Group, 37LK, SALT
VKM460/45 Pin and Bushing Group, 45LK, SALT
Page 502
VKM797 Master Link R/H
VKM798 Master Link L/H
VKM791 154-32-31130 Track Link, R.H.
VKM792 154-32-31120 Track Link, L.H.
VKM452 Pin Lubricated
VKM453 154-32-41143 Bushing
VCR3215 Spacer
Track Shoes
VFT1102/22 154-32-11113 Shoe, 1 B 22"
VFT1102/22M Shoe, 1 B 22" w/ Mud Hole
VFT1102/24 Shoe, 1 B 24"
VFT1102/26 Shoe, 1 B 26"
VFT1102/36 Shoe, 1 B 36"
VFT1102/36M Shoe, 1 B 36" w/ Mud Hole
VFT1461/24 Shoe, 1 B 24" ESS
VFT1461/26 Shoe, 1 B 26" ESS
VFT1461/36M Shoe, 1 B 36" ESS, w/ Mud Hole
Track Hardware
V155.32.11210 Track Shoe Bolt (20mm X 2.7")
V9691/06 Track Shoe Nut
V154.32.21260 Master Bolts
Bottom Rollers
VKM351 Roller Assembly, S/F with Collars-22mm Mounting Bolt Diameter
VKM353 Roller Assembly, D/F with Collars-22mm Mounting Bolt Diameter
Idlers
3 5
VKM375 o t Idler
Front d e with
t S a t ((For
Shaft o D75S-3,
5S 3, D75S-5,
5S 5, D95S-1,
95S , D95S-2)
95S )
VKM374 Front Idler with Shaft (For D80A-12, D85A-12, D85E-12)
V154.30.00770 Idler With Brackets (For D83E-1, P-1, D85A-21, D85E-21, P-21)
VKM835V Idler With Brackets (For D83E-1, P-1, D85A-21, D85E-21, P-21) (Optional)
Carrier Rollers
VC4085100M00 154-30-00310 Carrier Roller Assembly Less Brackets (D80A: S/N 10001-25000, D85A: S/N 10001-25000)
Sprockets
VKM224 Segment Group (D75S-2,-3,-5, D80A, D83E, D85A, D95S)
VKM224V Segment Group (D75S-2,-3,-5, D80A, D83E, D85A, D95S) (Optional)
V155.27.12181 Segment Bolt 22 mm (27 Needed)
Page 503
MODEL: Komatsu D150A-1, D155A-1, D155C-1, D155S-1

O.D. = 79 mm, Bolt Hole = 24 mm
Serial Nos: D150A-1 (41LK)
D155A-1 (41LK) 4-S/F, 10-D/F, 4-T/C Roller
D155C-1 (45LK)
D155S-1 (45LK)

VKM535/41/24 175-32-01664 Track Group, 41L, Sealed, w/ SML, w/ 1 B 24" Shoe ESS
Your Track Groups
VKM598 Master Link R.H.. (Complete)
VKM597 Master Link L.H.. (Complete)
VKM328 178-32-11131 Link R.H..
VKM329 Link L.H..
VKM330 176-32-11150 Pin
VKM332 Bushing
VKM385 Seal Washer
V175.32.81192 Master Shoe Bolt (Short)
V175.32.81312 Master Shoe Bolt (Long)
VKM425/41 Chain, 41L, SALT, w/ SML (Bush OD=79mm)
VKM425/41V Chain, 41L, SALT, w/ SML (Bush OD=79mm) (Optional)
VKM484/41/24 Track Group, 41L, SALT, w/ SML, w/ 1 B 24" Shoe ESS
Your Track Groups
VKM472/41 Pin & Bushing Group SALT 41LK
VKM598 Master Link R.H.. (Complete)
VKM597 Master Link L.H.. (Complete)
VKM328 178-32-11131 Link R.H..
VKM329 Link L.H..
VKM469 Bushing
VKM471 Spacer
V175.32.81192 Master Shoe Bolt (Short)
V175.32.81312 Master Shoe Bolt (Long)
Track Shoes
VKM337/22 170-32-11115 Shoe, 1 B 22"
VKM337/24 175-32-11113 Shoe, 1 B 24"
VKM337/26 Shoe, 1 B 26"
VKM337/28 Shoe, 1 B 28"
VKM278/24 175-32-31410 Shoe, 1 B 24" ESS
Track Hardware
V175.32.11210 Track Shoe Bolt (24mm X 3)
Page 504
V178.32.11220 Track Shoe Nut 24 mm
Bottom Rollers
VKM122 Roller Assembly, S/F
VKM122V Roller Assembly, S/F (Optional)
VKM123 Roller Assembly, D/F
VKM123V Roller Assembly, D/F (Optional)
Carrier Rollers
KM130 Carrier Roller Assembly (Optional)
Idlers
VKM836 Front Idler with Brackets D150, D155 (Not D155S)
VKM836V Front Idler with Brackets D150, D155 (Not D155S) (Optional)
VKM537 Front Idler Group
Sprockets
VKM193 Segment
VKM193V Segment (Optional)
V178.27.11150 Segment Bolt (24 MM) 27 Needed
V01803.02430 Segment Nut (27 Needed)
V170.27.00023 Seal Group, Final Drive
Page 505
MODEL: Komatsu D135A-1, D135A-2, D155A-2, D155A-
3, D155AX-3, D155AX-5
O.D. = 79 mm, Bolt Hole = 24 mm
Serial Nos: D135A-1: S/N 10001-10300 (40Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
D135A-2: S/N 10301-Up (40Lk) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier
Rollers
D155A-2(41 LK) 6-S/F, 6-D/F, 4-T/C Roller
D155A-3: 60001- Up(41 LK) 6-S/F, 6-D/F, 4-T/C Roller
D155AX-3(41 LK) 6-S/F, 6-D/F, 4-T/C Roller
D155AX-5 (41Lk) 6-S/F, 6-D/F, 4-T/C Roller

V15A.32.00030 15A-32-00030 Chain, 40L, Sealed, w/ Master Pin (Bushing O.D.= 81mm)
V175.32.00410 175.32.00410 Chain, 41L, Sealed, w/ Master Pin (Bushing O.D.= 81mm)
Your Track Groups
VKM1317 15A-32-11131 Link, RH
VKM1318 15A-32-11121 Link, LH
VKM332 176-32-E3110 Track Bushing (81mm O.D.)
176-32-11151 Track Pin
VKM385 176-32-E8270 Seal Washer
176-32-11172 Master Bushing
176 32 11192
176-32-11192 Master Pin
176-32-E8260 Master Bushing Spacer
VKM1270/40 Chain, 40L, Sealed, w/ SML (Bush OD=79mm)
VKM1270/41 Chain, 41L, Sealed, w/ SML (Bush OD=79mm)
Your Track Groups
VKM330 Pin
VKM332 Bushing
VKM1333/41/24 175-32-01960 Track Group, 41L, SALT, w/ SML, w/ 1 B 24" Shoe ESS
Your Track Groups
VKM472/41 Pin & Bushing Group SALT 41LK
VKM1267 Link Segment
VKM1325 Master Link R/H
VKM1326 Master Link L/H
Track Shoes
VKM337/22 170-32-11115 Shoe, 1 B 22"
VKM337/24 175-32-11113 Shoe, 1 B 24"
Page 506
VKM337/26 Shoe, 1 B 26"
VKM337/28 Shoe, 1 B 28"
Track Hardware
V175.32.11210 Track Shoe Bolt (24mm X 3)
V178.32.11220 Track Shoe Nut 24 mm
V175.32.41260 Master Bolts 24mm X 125.5mm
Bottom Rollers
VKM122 Roller Assembly, S/F
VKM122V Roller Assembly, S/F (Optional)
VKM123 Roller Assembly, D/F
VKM123V Roller Assembly, D/F (Optional)
VKM2265 Roller Assembly S/F (For D155A-3 & D155AX-3, D155AX-5 Models only)
VKM2265V Roller Assembly S/F (For D155A-3 & D155AX-3, D155AX-5 Models only) (Optional)
VKM2266 Roller Assembly D/F (For D155A-3 & D155AX-3, D155AX-5 Models only)
VKM2266V Roller Assembly D/F (For D155A-3 & D155AX-3, D155AX-5 Models only) (Optional)
Carrier Rollers
VKM2279 Carrier Roller Assembly (For D155A-3, AX-3, AX-5 Models Only)
VKM2279V Carrier Roller Assembly (For D155A-3, AX-3, AX-5 Models Only) (Optional)
Idlers
VKM836 Front Idler With Blocks (D155A)
VKM836V Front Idler With Blocks (D155A) (Optional)
N/A 17A-30-00040 Front Idler With Blocks (D155AX-3,5)
53
VKM537 o t Idler
Front d e With
t Shaft
S at
Sprockets
VKM1334 Segment (For D135A-1, 2 Models)
VKM193 Segment (For D155A-2,3, & AX-3, AX-5 Models)
VKM193V Segment (For D155A-2,3, & AX-3, AX-5 Models) (Optional)
V178.27.11150 Segment Bolt (24 MM) 27 Needed
Page 507
MODEL: Komatsu D275A-5
Specs: Track Pitch = 10.25", Link Height = , Bushing O.D. =
mm, Bolt Dia = 27 mm
Serial Nos: D275A-5 (39LK)
Lubricated Chains
VKM3593/39V Chain, 39L, SALT, w/ SML
Bottom Rollers
VKM3594V Roller Group, S/F
VKM3595V Roller Group, D/F
Carrier Roller
VKM3601V Carrier Roller Group
Sprockets
VKM3603V Segment Group
Page 508
MODEL: Komatsu D355
O.D. = 88 mm, Bolt Dia = 27 mm
Serial Nos: D355(39 LK)
Sealed w/MP Chains and Track Groups

VKM596/39 Chain, 39L, Sealed, w/ MP
VKM596/39V Chain, 39L, Sealed, w/ MP (Optional)
VKM596/42 Chain, 42L, Sealed, w/ MP
VKM596/42V Chain, 42L, Sealed, w/ MP (Optional)
VKM648/39/24 195-32-02404 Track Group, 39L, w/ SML, w/ 1 B 24" Shoe
VKM648/39/28 195-32-02424 Track Group, 39L, w/ SML, w/ 1 B 28" Shoe
Your Track Groups
VKM581 Master Link, L/H (Complete)
VKM582 Master Link, R/H (Complete)
VKM431 Track Pin
VKM426/39 195-32-00170 Chain, 39L, SALT, w/ SML
VKM426/39V 195-32-00170 Chain, 39L, SALT, w/ SML (Optional)
VKM476/39/28 195-32-02728
195 32 02728 Track Group
Group, 39L
39L, SALT
SALT, w/ SML,
SML w/ 1 B 2828" Shoe
Your Track Groups
VKM581 Master Link, L/H (Complete)
VKM582 Master Link, R/H (Complete)
VKM715 Track Pin
VKM717 Spacer
VCR3191 Plug With Stopper (ITM Style)
Track Hardware
V195.32.11210 Track Shoe Bolt, 27mm
V195.32.11221 Track Shoe Nut, 27mm
195.23.23140 Master Shoe Bolt, 27mm
Track Shoes
VKM234/24 Shoe, 1 B 24"
VKM234/28 Shoe, 1 B 28"
Bottom Rollers
VKM926 195.30.00336 Roller Group S.F. (D355A-3 1632-UP), (D355A-5, D355C)
VKM926V 195.30.00336 Roller Group S.F. (D355A-3 1632-UP), (D355A-5, D355C) (Optional)
VKM927 195.30.00346 Roller Group D.F. (D355A-3 1632-UP), (D355A-5, D355C)
VKM927V 195.30.00346 Roller Group D.F. (D355A-3 1632-UP), (D355A-5, D355C) (Optional)
Carrier Rollers
VKM578 195-30-00106 Carrier Roller Assembly (D355A-1/ D355A-3/ D355A-5/ D355C)
VKM578V 195-30-00106 Carrier Roller Assembly (D355A-1/ D355A-3/ D355A-5/ D355C) (Optional)
Idlers
Page 509
VKM837 Front Idler With Brackets
Sprockets
VKM341 Segment Group (D355A-1, D355A-3, D355A-5)
VKM341V Segment Group (D355A-1, D355A-3, D355A-5) (Optional)
V195.27.12632 Segment Bolt (27 Needed)
V170.27.00023 Seal group
Page 510
MODEL: Komatsu D375A-2
Specs: Track Pitch = 280mm", Link Height = 181 mm,
Bushing O.D. = 98 mm, Bolt Dia = 30mm
Serial Nos: D375A-2:16001-17000(40LK)
D375A-3: 17001-UP(40LK) 8-S/F, 8-D/F, 4-T/C
D375A-5: (40LK)

VKM1274/40 195.32.00541 Chain, 40L, SALT, w/ SML (also 195.32.00591)
VKM1274/40V 195.32.00541 Chain, 40L, SALT, w/ SML (also 195.32.00591) (Optional)
Your Track Groups
VKM1275/40 Pin and Bushing Group, 40LK SALT
VKM1352 195-32-61120 Track Link, L.H..
VKM1351 195-32-61130 Track Link, R.H..
VKM1357 195-32-61151 Salt Pin
VKM1996 195-32-61340 Salt Bushing
VKM3447 195-32-61201 Seal Assembly
VKM1995 195-32-61180 Thrust Ring
VKM2015 195-32-41290 Plug Assembly
VKM1349 Master Link, R/H Complete (2-Halves)
VKM1350 Master Link, L/H Complete (2-Halves)
Track Hardware
V195.32.61210 Track Shoe Bolt, 30mm
V195.32.61220 Track Shoe Nut, 30mm
V195.32.61350
V195 32 61350 195-32-61350 Master Shoe Bolt 30mm X 167.5mm
167 5mm
Track Shoes
VKM1276/610 195-32-61110 Shoe, 1 B 610mm
VKM1276/710 195-32-61370 Shoe, 1 B 710mm
VKM1276/760 195-32-61380 Shoe, 1 B 760mm
VKM1276/810 195-32-61390 Shoe, 1 B 810mm
Bottom Rollers
VKM1277 195.30.01011 Roller Assembly S/F (8-Required) (also 195.30.01411)
VKM1277V 195.30.01011 Roller Assembly S/F (8-Required) (also 195.30.01411) (Optional)
VKM1279 195.30.01021 Roller Assembly D/F (8-Required) (also 195.30.01421)
VKM1279V 195.30.01021 Roller Assembly D/F (8-Required) (also 195.30.01421) (Optional)
Carrier Rollers
VKM1281 195.30.01040 Carrier Rollers (4-Required) (also 195.30.01041)
VKM1281V 195.30.01040 Carrier Rollers (4-Required) (also 195.30.01041) (Optional)
Sprockets
VKM1285 195.27.33111 Segment Group 5-Pc (25-Bolt Hole) (also 195.27.33111)
V195.27.33130 Segment Bolt (Required -25)
V195.27.33141 Segment Nut (Required -25)
Idlers
N/A 195.30.01030 Front Idler With Brackets (also 195.30.01430)
Page 511
MODEL: Komatsu D475A-1, A-2
Specs: Track Pitch = 317.5mm", Link Height = 199mm,
Bushing O.D. = 116mm, Bolt Dia = 33mm
Serial Nos: D475A-1: S/N 10001-10200 (40Lk) 8-S/F Rollers, 8-D/F Rollers, 4-Carrier
Rollers
D475A-2: 10201-UP(39Lk) 8-S/F Rollers, 8-D/F Rollers, 4-Carrier Rollers

V198.32.00120 Chain, 39L, SALT, w/ SML
Your Track Groups
Track Hardware
Track Shoes
VKM3098/710 198-32-3111 Shoe, 1 B 710mm
VKM3147/710 198-32-16141 Shoe, Master, 1 B 710mm
VKM3098/810 198-32-31372 Shoe, 1 B 810mm
VKM3098/910 198-32-31381 Shoe, 1 B 910mm
Bottom Rollers
198-30-00421 Roller Assembly S/F
198-30-00432 Roller Assembly D/F
Carrier Rollers
198-30-00410 Carrier Rollers
Sprockets
198-27-42260 Segment Group
Page 512
MODEL: Komatsu PC60, PC60LC
Specs Pitch= 135mm, Link Ht = 105mm, Bushing O.D. =
Serial Nos: PC60-1: (40LK)
PC60LC-1: (45LK)
PC60-2: (40LK)
PC60LC-2: (45LK)
PC60-3: (42LK)
PC60LC-3: (45LK)
PC60-5: (42LK)
PC60LC-5: (46LK)

VKM906/40HD 201-32-00112 Chain, 40L, Sealed & Greased, w/ Master Pin
Your Track Groups
VKM910/45HD Pin & Bushing Group 45Lk Sealed & Greased
VKM940 101-32-11131 Link, R/H
VKM941 101-32-11121 Link, L/H
VKM942 201-32-11151) Track Pin
VKM950HD Spacer
Track Shoes
VKM908/300 102-32-11290 Track Shoe 3 B 300mm W/Mud Holes
VKM908/450 Track Shoe 3 B 450mm W/Mud Holes
VKM908/480 201-32-15111 Track Shoe 3 B 480mm W/Mud Holes
VKM908/600 Track Shoe 3 B 600mm W/Mud Holes
Track Hardware
VFT887 Track Nut 12mm Square
Bottom Rollers
VKM909 101-30-00042 Roller Assembly S/F(**Note: Do not use for PC60-5 & PC60LC-5) (10-Needed for PC60, 12-
Needed for PC60LC Machines)
VKM909V Roller Assembly S/F(**Note: Do not use for PC60-5 & PC60LC-5) (10-Needed for PC60, 12-
Needed for PC60LC Machines) (Optional)
VKM1690V 201-32-00062 Roller Assembly For PC60-5, 6
Carrier Rollers
VKM2794 203-30-00150 Carrier Rollers Note: For PC60-5 & PC60-6 Models only
VKM2794V Carrier Rollers Note: For PC60-5 & PC60-6, PC-6 Models only (Optional)
Idlers
N/A 201-30-00012 Idler With Brackets
Sprockets
VKM911V 201-27-11530 Sprocket, **SPLINED**, 25-T (For PC60-1 Model)
N/A 201.27.31120 Sprocket, 25 T, 12 B/H (PC60-2)
N/A 201.27.41110 Sprocket, 25 T, 12 B/H (PC60-3/5)
Page 513
VKM912V Sprocket Rim, 25T (For PC60-1, 2, 3, 5 Models)
Page 514
MODEL: Komatsu PC60-6, PC60-7, PC70-6, PC75UU
Serial Nos: PC60-6: (37LK) 10-Bottom Rollers, 2-Carrier Rollers
PC60LC-6 (41Lk)
PC60-7: (38Lk) 10-Bottom Rollers, 2-Carrier Rollers
PC75UU: (39Lk)

VKM3041/37HDV 201-32-00201 Chain, 37L, Sealed & Greased, w/ Master Pin (Optional)
V9156478HD 201-32-00300 Chain, 38L, Sealed & Greased, w/ Master Pin
V9156478HDV 201-32-00300 Chain, 38L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
Track Hardware
Track Shoes
VKM1685/450 2040402 Shoe, 3 B 450mm
VKM1685/450V 2040402 Shoe, 3 B 450mm (Optional)
VAT183364 2041367 Shoe, 3 B 600mm
Bottom Rollers
VKM1690V 201-30-00062 Roller Assembly (For PC60-6, 7 Models)
Carrier Rollers
VKM2794 203-30-00150 Carrier Rollers Note: For PC60-6, PC70-6 Models only
VKM2794V Carrier Rollers Note: For PC60-6, PC70-6 Models only (Optional)
V20T.3000051V Carrier Rollers Note: For PC60-7 Models only
Sprockets
VKM3158V Sprocket (For PC60-6, 7 )
Page 515
MODEL: Komatsu PC80-1, PC80-3, PC80LC-3, PC100-3,
PC120-3
Serial Nos: PC80-1: (41Lk) 10-Bottom Rollers, 2-Carrier Rollers
PC80LC-3: (43Lk) 12-Bottom Rollers, 2-Carrier Rollers

VKM965/41 Chain, 41L, Sealed & Greased, w/ Master Pin
Your Track Groups
Track Hardware
Track Shoes
VKM276/600 Shoe, 3 B 600mm
Bottom
B tt Rollers
R ll
203-30-00023 Roller Assembly (For PC80-1 Only)
VKM1705 203-30-00140 Roller Assembly (For PC80-3, PC80LC-3, PC100-3, PC120-3 Models Only)
Carrier Rollers
203-30-00012 Carrier Roller (For PC80-1 Only)
VKM2794 203-30-00150 Carrier Roller (For PC80-3, PC80LC-3, PC100-3, PC120-3 Models Only)
VKM2794V Carrier Roller (For PC80-3, PC80LC-3, PC100-3, PC120-3 Models Only) (Optional)
Sprockets
20X-27-11320 Sprocket (For PC80-1 Model Only)
20X-27-21110 Sprocket (For PC80-3, PC80LC-3 Models Only)
V203.27.41111 203-27-41111 Sprocket (For PC100-3, PC120-3 Models Only)
Page 516
MODEL: Komatsu PC90-1, PC100-5, PC100-6, PC120-5,
6, PC130-5, PC130-6
Specs Pitch= 175mm, Link Ht = 105mm, Bushing O.D. =
PC120-5: (42LK) 14-Bottom Rollers, 2-Carrier Rollers
PC120-6: (42LK) 14-Bottom Rollers, 2-Carrier Rollers

VKM1262/38HD 20X-32-00100 Chain, 38L, Sealed & Greased, w/ Master Pin
VKM1262/42HDV 203-32-00102 Chain, 42L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VKM1702HD Link, L.H
VKM1701HD Link, R.H
VKM1799HD Track Pin
VKM1800HD Master Pin
V4012000N42 Seal Assembly
VKM1024HD Spacer
Track Hardware
V205.32.51120 Track Shoe Bolt, 16mm X 50mm, 1.5mm thread pitch
V9691/04 Track Shoe Nut, 16mm
V7H3597 Track shoe bolt, 5/8 x 2 1/8 (option if above is out of stock)
V1M1408 Track Shoe Nut, 5/8 (option if above is out of stock)
Track Shoes
VKM1263/600 Shoe, 3 B 600mm
VKM1263/700 Shoe, 3 B 700mm
Bottom Rollers
VKM1705 203-30-00110 Roller Assembly
Carrier Rollers
VKM2794 Carrier Rollers
Idlers
V203.30.00160 Idler Group (For PC100-5, 6, PC120-5, PC120-6, PC130-5, PC130-6 Models Only)
Sprockets
VKM1925 203-27-61310 Sprocket (For PC100-5, PC120-5, PC120-6 Models Only)
VKM1925V 203-27-61310 Sprocket (Optional)
Page 517
MODEL: Komatsu PC150-1, PC150-3, PC150LC-1,
PC150LC-3
Specs 175mm Pitch, Link Height =101.5mm, Bushing
Serial Nos: PC150-1: (43Lk) 12-Bottom Rollers, 2-Carrier Rollers

VKM1400/43 21K-32-00012 Chain, 43L, Unsealed, w/ Master Pin
Your Track Groups
Track Hardware
Bottom Rollers
VKM1179 Roller Assembly, SF ( PC150-1, PC150LC-1 Models)
VKM1179V Roller Assembly, SF ( PC150-1, PC150LC-1 Models) (Optional)
VKM1428 Roller Assembly, SF (PC150-3, PC150LC-3 Models)
VKM1428V Roller Assembly
Assembly, SF (PC150-3,
(PC150 PC150LC-3
3 PC150LC 3 Models) (Optional)
Carrier Rollers
VKM1640 20Y-30-00022 Carrier Roller Assembly
Seal Group (Use for Sorefa Rollers Only)
Idlers
205-30-00073 Idler Group (For PC150-1, PC150LC-1 Models)
VKM1641 205-30-00182 Idler with Brackets (PC150-3, PC150LC-3 Models)
VKM1641V Idler with Brackets (PC150-3, PC150LC-3 Models) (Optional)
Sprockets
Page 518
MODEL: Komatsu PC180-3, PC180LC-3, PC200-1, PC200-
2, PC200LC-2, PC200-3, PC200LC-3, PC220-1,
PC220-2, PC220LC-2, PC220-3, PC220LC-3

Serial Nos: PC180-3(45 LK)
PC180LC-3(45 LK)
PC200-1(43 LK)
PC220-2(46 LK)
PC200LC-2
PC200-3 (SER # up to 33762) (45 LK)
PC200LC-3 (SER # up to 33883) (49 LK)
PC220-1(46 LK)
PC220-2(46 LK)
PC220LC-2
PC220-3 (SER # up to 23302) (47 LK)
PC220LC-3 (SER # up to 23322) (51 LK)
PF55L-1

Your Track Groups
V031265 Spacer
Page 519

Your Track Groups
VKM1149/47HD Pin and Bushing Group, 47LK
VKM1148HD Master
M t PinPi Complete
C l t
VKM70HD Seal Assembly Polyurethane
VKM71HD Spacer
VAT174863 Snap Ring
Track Hardware
Track Shoes
Bottom Rollers
VKM1179 Roller Assembly, SF ( PC100L-3 s/n 12001-up; PC150-3; PC150LC-3
PC180LC-3; PC200-3; PC200LC-3; PC220-3; PC200LC-3; PC210-3; PC240-3; PF55L-1)
16mm Mounting
VKM1179V Roller Assembly, SF ( PC100L-3 s/n 12001-up; PC150-3; PC150LC-3
PC180LC-3; PC200-3; PC200LC-3; PC220-3; PC200LC-3; PC210-3; PC240-3; PF55L-1)
16mm Mounting (OPTIONAL)
Page 520
Carrier Rollers
V9W6647 Seal Group (Use for Sorefa Rollers Only)
Idlers
VKM1641 Idler with Brackets (PC180-3, LC-3, PC200-3, LC-3, PC220-3, LC-3)
VKM1641V Idler with Brackets (PC180-3, LC-3, PC200-3, LC-3, PC220-3, LC-3) (Optional)
Sprockets
OEM ONLY 206-27-21111 Sprocket PC200-2, PC200LC-2 (Splined Hub) Serial Number Up To 15001
VCR5356 Sprocket Weld On Rim - For above Splined Hub Sprocket
VKM1217 Sprocket (21 teeth)-(PC180-3, PC180LC-3, PC200LC-2, PC200-3, PC200LC-3, PC220-3,
PC220LC-2, PC220-3, PC220LC-3, PF55L-1)-16mm Bolt Diameter
VKM1217V Sprocket (21 teeth)-( Optional, see above for Machine details)
Page 521
MODEL: Komatsu PC150-5-LC, PC210-3, PC200-3,
PC200LC-3, PC200-5, PC200LC-5,
PC200LC-6/7, PC220-3, PC220LC-3, PC220-5,
PC220LC-5, PC220LC-6/7, PC240-3-LC,
PF55L-1
Serial Nos: PC150-5(41LK) 12-Bottom Rollers, 2-Carrier Rollers
PC150LC-5(43LK) 14-Bottom Rollers, 2-Carrier Rollers
PC200-3: SER # 33763 & Up - (45 LK) 14-B/R, 4-Carrier Rollers
PC200LC-3: SER # 33884 & Up (49 LK) 18-B/R, 4-Carrier Rollers
PC200-5: (45 LK) 14-Bottom Rollers, 4-Carrier Rollers
PC200LC-5: (49 LK) 18-Bottom Rollers, 4-Carrier Rollers
PC210-3 (45Lk) 14-Bottom Rollers, 4-Carrier Rollers
PC220-3: SER # 23303 & Up (47 LK) 16-Bottom Rollers, 4-Carrier Rollers
PC220LC-3: SER # 23323 & Up (51 LK) 20-B/R, 4-Carrier Rollers
PC220-5: (47 LK) 16-Bottom Rollers, 4-Carrier Rollers
PC240-3 (47Lk) 16-Bottom Rollers, 4-Carrier Rollers
PC240LC-3 20-Bottom
PC240LC 3 (51Lk) 20 B tt Rollers,
R ll 4-Carrier
4 C i Rollers
R ll
PF55L-1: 10196 up (49 LK)
Contact Your VPI Representitive for parts availability of Older Style Chains

Your Track Groups
Page 522
V031265 Spacer
**Call
Your Track Groups
Track Hardware
Track Shoes
Page 523
Bottom Rollers
VKM1428 20Y-30-00012 Roller Assembly, SF (See above for Serial Number Details)
VKM1428V Roller Assembly, SF (See above for Serial Number Details) (Optional)
Carrier Rollers
VKM3532V Carrier Roller Assembly (PC200-7/PC200LC-7/PC220-7/PC220LC-7 ONLY)
V9W6647 Seal Group (Use for Sorefa Rollers Only)
Idlers
VKM1641 Idler Group (PC150-5, 200-3, 220-3, 240-3,5)
VKM1641V Idler Group (PC150-5, 200-3, 220-3, 240-3,5) (Optional)
VKM1642 Idler Group (PC200-5,LC-5; PC200-6,LC-6; PC220-5,LC-5; PC220-6,LC-6 (Short Bracket)
VKM1642V Idler Group (Optional) (Short Bracket)
VKM3299V Idler Group (PC200-7, PC200LC-7; PC220-7, PC220LC-7 ONLY)
VKM1803 Idler w/bushings
VKM1554 Seal Group
V20Y.30.29100 Track Adjuster Spring Assembly (For PC200-5, PC200-6, PC220-5, PC220-6 Models)
**NOTE INTERCHANGEABLE WITH OEM**
Sprockets
VKM1926 Sprocket (PC150-5)
VKM1217 Sprocket (21 teeth)-(PC180-3, PC180LC-3, PC200-3, PC200LC-3, PC220-3)
PC220LC-3, PC240-3, PC240LC-3, PF55L-1)-16mm Bolt Diameter
VKM1217V Sprocket (21 teeth)-( Optional, see above for Machine details)
VKM1501 Sprocket (21 teeth)-PC200-5; PC200LC-5; PC200LC-6, PC220-5; PC220LC-5,-18mm Blt.
VKM1501V Sprocket (21 teeth)-PC200-5; PC200LC-5; PC200LC-6, PC220-5; PC220LC-5-18mm Blt.
(Optional)
VKM1423 Seal Group
Page 524
MODEL: Komatsu PC300-1, PC300-2, PC300LC-2, PC300-
3, PC300LC-3, PC300-5, PC300LC-5
Serial Nos: PC300-1: 10356 up (45 LK)
PC300LC-1: 10001 up (51 LK)
PC300-2: 11001 up (45 LK)
PC300LC-2: 11001 up (51 LK)
PC300-3: 12001-Up (47LK)
PC300LC-3: 12001-Up (51LK) 16-S/F Roller, 4-T/C Roller
PC300-5 ** 22mm B/H ** : 20001-Up (47LK)
PC300LC-5 ** 22mm B/H**: 20001-Up (50LK)
Unsealed Track Chains Track Groups (20mm Bolt Dia)

Your Track Groups
VKM959F g
Link Segment
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
Sealed Track Chains and Track Groups (20mm Bolt Dia)
VKM970/50/600 Use KM970/50600H
VKM970/51/600 Use KM970/51600H
VKM970/51/700 Use KM970/51700H
VKM970/51/750 Use KM970/51750H
VKM970/51/800 Use KM970/51800H
Your Track Groups
Page 525
VKM1365 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed & Greased Track Chains & Track Groups (20MM)
VKM970/50750H Track
T k Group,
G 50L,
50L SSealed
l d&G Greased,
d w// M
Master
t PiPin, w// 3 B 750
750mm Sh
Shoe
Your Track Groups
VKM1033HD Link, R/H
VKM1034HD Link, L/H
VKM1365HD Track Pin
VCR1632HD Spacer
Track Hardware (20mm)
Page 526
Sealed Track Chains (22mm Bolt Diameter) PC300-5
VKM1617/47 Chain, 47L, Sealed, w/ Master Pin, (22mm Bolt Hole)
VKM1618/47700 Track Group, 47L, Sealed, w/ Master Pin, w/ 3 B 700mm Shoe (22mm Bolt Hole)
VKM1618/51700 Track Group, 51L, Sealed, w/ Master Pin, w/ 3B 700mm Shoe (22mm Bolt Hole)
Your Track Groups
VKM1406/47 Pin & Bushing Group 47LK Sealed w/Master Pin
VKM1716 Link R.H.
VKM1717 Link L.H.
VKM1365 Pin
VKM1366 Master Pin
VKM170TH Bushing
VCR1632 Spacer
VCR1630 Seal Washer
Sealed & Greased Track Chain (22mm Bolt Dia) PC300-5
VKM1617/47HDM Chain, 47L, Sealed & Greased, w/ Master Pin

Your Track Groups
VKM1406/47HDM Pin and Bushing Group, 47LK
VKM1617HDM Link Segment 22mm Bolt Hole
VKM1717 Link, L.H. 22mm Bolt Hole
VKM1716 Link, R.H. 22mm Bolt Hole
VKM1365HDM Sealed Pin
VKM170HDM Sealed Bushing
VKM1403HDM Master Pin Complete
VKM16366HDM Master Pin
VKM171HDM Master Bushing
VCR1630HDM Seal Washer-Polyurethane
Track Hardware (22 mm)
V207.32.51210 Track Bolt, 22mm X 56mm
V207.32.51220 Track Nut (22mm Hex)
Page 527
Bottom Rollers - Excavator Type
VKM1429 207-30-00150 Roller Assembly, S/F (PC300-5,6, PC350-6, PC300LC-5) 22mm Mounting Bolt - Exc Type
PC300LC-3 Effective with S/N # 14119-19999
VKM1429V Roller Assembly, S/F (PC300-5; PC300LC-5) 22mm Mounting Bolt - Exc- Type (Optional)
VKM1819 Seal Group
V8F6711 O-Ring/Shaft
Bottom Rollers - Tractor Type
VKM116 Roller Assembly, S/F with Collars (PC280-3; PC280LC-3; PC300-1-Tractor Type
PC300LC-1; PC300-2; PC300LC-2)-18mm Mounting Bolt Diameter (PC300LC-3 Effective
with S/N 12001-14118)
VKM116V Roller Assembly, S/F with Collars (PC280-3; PC280LC-3; PC300-1-Tractor Type (Optional)
VKM117 Roller Assembly, D/F with Collars (PC280-3; PC280LC-3; PC300-1-Tractor Type
PC300LC-1; PC300-2; PC300LC-2)-18mm Mounting Bolt Diameter
VKM117V Roller Assembly, D/F with Collars (Optional) Tractor Type
Carrier Rollers
VKM1817 208-30-00320 Carrier Roller Assembly (207-30-00140)
VKM1817V Carrier Roller Assembly (Optional, See Above For Machine Details)
V20Y.30.00041 Seal Group
Idlers
VKM2018 207-30-00160 Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300-6
VKM2018V Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300-6 (Optional)
VPC300SL Seal Group
V207.30.68500 Track Adjuster Spring Assembly (For PC300-5, PC300-6 Models)
V207.30.00071 Front Idler Group w/Brackets (PC280LC-3, PC300-3, PC300LC-3)
Sprockets
VKM1615 207-27-33222 Sprocket-Bolt On (22 Teeth)
VKM1615V Sprocket-Bolt On (22 Teeth) (Optional)
VKM1809 Bolt
Page 528
MODEL: KOMATSU PC250-6, PC250LC-6 Early Model
PC250LC-6: A80001-A81999 (50LK) 16-Bottom Rollers, 4-Carrier Rollers
Sealed Track Chains (22mm Bolt Diameter)

Your Track Groups
VKM1406/47 Pin & Bushing Group 47LK Sealed w/Master Pin
VKM1716 Link R.H.
VKM1717 Link L.H.
VKM1365 Pin
VKM1366 Master Pin
VKM170TH Bushing
VCR1632 Spacer
VCR1630 Seal Washer
Sealed & Greased Chains "M" Type (22mm Bolt Hole)
VKM1617/45HDM Chain, 45L, Sealed & Greased
Chain 45L Greased, w/ Master Pin
Your Track Groups
VKM1617HDM Link Segment 22mm Bolt Hole
VKM1717 Link, L.H. 22mm Bolt Hole
VKM1716 Link, R.H. 22mm Bolt Hole
VKM1403HDM Master Pin Complete
Track Hardware (22 mm)
V207.32.51210 Track Bolt, 22mm X 56mm
V207.32.51220 Track Nut (22mm Hex)
Bottom Rollers
VKM1429 207-30-00150 Roller Assembly, S/F (PC300-5,6, PC350-6, PC300LC-5)-22mm Mounting Bolt - Exc Type
PC300LC-3 Effective with S/N # 14119-19999
VKM1429V Roller Assembly, S/F (PC300-5; PC300LC-5)-20mm Mounting Bolt Exc - Type (Optional)
VKM1819 Seal Group
Page 529
V8F6711 O-Ring/Shaft
Carrier Rollers
VKM1817 208-30-00320 Carrier Roller Assembly (207-30-00140)
Idlers
VKM2018 207-30-00160 Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300-6
VKM2018V Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300-6 (Optional)
VPC300SL Seal Group
V207.30.00071 Front Idler Group w/Brackets (PC280LC-3, PC300-3, PC300LC-3)
Sprockets
VKM1615 207-27-33222 Sprocket-Bolt On (22 Teeth)
VKM1615V Sprocket-Bolt On (22 Teeth) (Optional)
VKM1809 Bolt
Page 530
MODEL: KOMATSU PC250LC-6/7, PC290LC-6,
PC300-6/7, PC300LC-6/7, PC340-6/LC-6,
PC350-6/LC-6
Serial Nos: PC250LC-6: A82000-A83999 (48Lk)
PC250LC-7: A82000-A83999 (48Lk)
PC290LC-6(48LK)
PC300-6:(45LK) 14-Bottom Rollers, 4-Carrier Rollers
PC300-7:(45LK) 14-Bottom Rollers, 4-Carrier Rollers
PC300LC-6 (48LK) 16-Bottom Rollers, 4- Carrier Rollers
PC300LC-7 (48LK) 16-Bottom Rollers, 4- Carrier Rollers
PC340-6 (45LK)
PC340LC-6 (48LK)
PC350-6 (45LK) 14-Bottom Rollers, 4-Carrier Rollers
PC350LC-6 (48LK) 16-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VKM2235HD Track
T k Link,
Li k LL.H.
H
VKM1365 Track Pin
VKM1366 Master Pin
VKM2233/45HD 207-32-00300 Chain, 45L, Sealed and Greased, w/ Master Pin
VKM2233/45HDV 207-32-00300 Chain, 45L, Sealed and Greased, w/ Master Pin (Optional)
VKM2233/48HD 207-32-00310 Chain, 48L, Sealed and Greased, w/ Master Pin
VKM2233/48HDV 207-32-00310 Chain, 48L, Sealed and Greased, w/ Master Pin (Optional)
Your Track Groups
VKM1365 Track Pin
VKM1366 Master Pin (1.75" X 9.5")
VKM1905HD Bushing
Track Hardware
Page 531
V3081343 Track Bolt, 22mm X 59mm X 1.5mm (Use with Triple Bar Shoe)
V76007851 Track Bolt, 22mm X 70mm X 1.5mm (Use With 2-Bar Shoe SJ.0162/0700)
V79035320 Track Nut, 22mm X 1.5mm
V207.32.51210 Track Bolt 22mm X 56mm (Can Use as an alternative based on shoe base plate thickness)
(Confirm with VPI before ordering these bolts) Course Thread, do not mix.
V207.32.51220 Track Nut 22mm Hex (Can Use as an alternative) Course Thread, do not mix.
Track Shoes
VKM2118/600 207-32-61110 Track Shoe, 3 B 600mm
Bottom Rollers
VKM1429 207-30-00150 Roller Assembly, S/F -22mm Mounting Bolt Dia-Exc. Type
VKM1429V Roller Assembly S/F (Optional) -22mm Mounting Bolt Dia.-Exc. Type
Carrier Rollers
VKM3538V Carrier Roller Assembly (PC250-7/PC250LC-7/PC300-7/PC300LC-7 ONLY)
Idlers
VKM2018 207-30-00160 Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300-6/7, PC300LC-6/7
VKM2018V Front Idler Group Complete (Short Bracket)-PC300-5/LC-5, PC300LC-6/7 (Optional)
VPC300SL Seal Group
V207.30.68500 Track Adjuster Spring Assembly (For PC300LC-5, PC300LC-6 Models)
Sprockets
VKM2385 Sprocket (21- Teeth, 20- Bolt Hole, 20mm Mounting B/H)
VKM2385V 207-27-61210 Sprocket (21- Teeth, 20- Bolt Hole, 20mm Mounting B/H) (Optional)
Page 532
MODEL: KOMATSU PC360-3, PC360LC-3, PC400-1,
PC400LC-1, PC400-3, PC400LC-3, PC400-5,
PC400LC-5
Serial Nos: PC400-1: (**22mm **) (46 LK) 14-Bottom Rollers, 4-Carrier Rollers
PC400LC-1: (**22mm **) (52 LK) 18-Bottom Rollers, 4-Carrier Rollers
PC400-3: up to 12243 (**22mm **) (49 LK) 14-Bottom Rollers, 4-Carrier
Rollers
PC400LC-3: up to 12243 (**22 mm **) (53 LK) 16-Bottom Rollers, 4-Carrier
Rollers
PC360LC: (**24mm**) (53LK) 16-Bottom Rollers, 4-Carrier Rollers
PC360-3: 10001 up (**24 mm **)
PC360-LC-3: 10001 up (**24 mm **) (53 LK) 16-Bottom Rollers, 4-Carrier
Rollers
PC360-5:(**24 mm **)
PC360LC-5: (**24mm**) (52LK) 16-Bottom Rollers, 4-Carrier Rollers
PC400-3: 12244 up (**24 mm **) (49 LK)
PC400-5: (**24 mm **) (49 LK) 14-Bottom Rollers, 4-Carrier Rollers
PC400LC-5: (**24 mm **) (52 LK) 16-Bottom Rollers, 4-Carrier Rollers
PC400-HD-5: (**24 mm **) (52LK) 20-Bottom Rollers, 4-Carrier Rollers
Sealed Chains and Track Groups (22mm Bolt Hole)

VKM973/49 Chain, 49L, Sealed
Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
Track Hardware **22 mm **
V79035320 Track Nut
Page 533
VKM1402/49 208-32-00101 Chain, 49L, Sealed, w/ Master Pin (24mm Bolt Hole)
Your Track Groups
VLSPC400DY2 Link Segment
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
Sealed & Greased and Track Groups (24mm Bolt Hole)
Your Track Groups
VKM1402HDM Link Segment
VKM1402HDV Link Segment (Optional for V-Track)
VKM804HD Spacer
V175.32.11210 175.32.11210 Track Shoe Bolt, 24MM X 76MM X 1.5mm thread pitch
V178.32.11220 178.32.11220 Track Shoe Nut, 24MM Square
Page 534
Bottom Rollers
VKM1743 208.30.00210 Roller Assembly, SF-Excavator Style (PC360LC-5, PC400-5,6, PC400HD-5, PC400LC-5,6)
VKM1743V 208.30.00210 Roller Assembly, SF-Excavator Style (Optional)
Carrier Rollers
VKM1817 207-30-K1800 Carrier Roller Assembly (207-30-00140)
Sprockets
VKM1616 208.27.31221 Sprocket 23-Teeth (PC360-3,5, PC400-3,5, PC400HD-5, PC400LC-3,5)
VKM1616V Sprocket 23-Teeth (PC360-3,5, PC400-3,5, PC400HD-5, PC400LC-3,5) (Optional)
Idlers
VKM1973V 208.30.00200 Idler w/Brackets (PC400-5, 6)
208.30.00071 Idler w/Brackets (PC400-3)
V208.30.X2250 Track Adjuster Spring Assembly (For PC400-5, PC400LC-5, PC400LC-6 Models)
Page 535
MODEL: KOMATSU PC300HD-6/7, PC400-6, PC400LC-6,
PC450-6, PC450LC-6, PC380LC-6
Specs Pitch= 9", Link Ht = 129mm, Bolt Dia= 24mm
Serial Nos: PC300HD-6/7: Check Number of Links
PC400-6: Serial # 30001-Up (46LK) 14-Bottom Rollers, 4-Carrier Rollers
PC400LC-6: Serial # 30001-Up (49LK) 16-Bottom Rollers, 4-Carrier Rollers
PC450-6: Serial # 10001-Up (46LK) 14-Bottom Rollers, 4-Carrier Rollers
PC450LC-6: Serial # 10001-Up (49LK) 16-Bottom Rollers, 4-Carrier Rollers
PC380LC-6: (49LK) 16-Bottom Rollers, 4-Carrier Rollers
Sealed & Greased Chains and Track Groups (24mm B/H)
VKM2489/46M 208-32-00300 Chain, 46L, Sealed & Greased, w/ Master Pin

VKM2489/49M 208-32-00310 Chain, 49L, Sealed & Greased, w/ Master Pin
VKM2489/49V 208-32-00310 Chain, 49L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VKM2678/49M Pin & Bushing Group 49LK
VKM2492M Track Link L/H
VKM2491M Track Link R/H
VKM2489M Link Segment
VKM1398HDM Track Pin
VKM1411V Master Pin Group (Optional)
VKM1399 Master
M t PinPi
VKM804HDM Master Seal "M" Type
VKM802HDM Track Bushing
VKM1813 208-32-61210 Track Bolt 24mm X 65mm
VKM1635 208-32-51220 Track Nut 24mm Hex
VKM2119/600 Shoe, 3 B 600mm
VKM2119/700 Shoe, 3 B 700mm
VKM2119/800 Shoe, 3 B 800mm
VKM2119/900 Shoe, 3 B 900mm
V99M04 Shoe, 2 B 700mm With Mud Hole
Carrier Rollers
VKM1817 207-30-K1800 Carrier Roller Assembly
Bottom Rollers
VKM1743 208.30.00210 Roller Assembly, SF-Excavator Style
VKM1743V 208.30.00210 Roller Assembly, SF-Excavator Style (Optional)
Sprockets
VKM2384 208-27-61210 Sprocket 21-Teeth; 26- Bolt Holes; 20mm Mounting B/H
VKM2384V Sprocket 21-Teeth; 26- Bolt Holes; 20mm Mounting B/H
Idlers
VKM1973V 208.30.00200 Idler w/Brackets (PC400-6)
Page 536
MODEL: KOMATSU PC600LC-6, PC650LC-6
Specs Pitch = 9.00", Link Ht = 133mm, Bushing Dia.=79mm,
Bolt Dia= 24mm
Serial Nos: PC600-6: (49Lk)
PC600LC-6: (52Lk) - 18 Bottom Roller, 6 Top Roller
PC650LC-6: (52Lk) - 18 Bottom Roller, 6 Top Roller
Sealed & Greased Track Chain (24mm Bolt Hole)

V9137495HD KM3057/49 Chain, 49L, Sealed & Greased, w/ Master Pin
V9137494HD KM3057/52 Chain, 52L, Sealed & Greased, w/ Master Pin
Your Track Groups
***Parts Below "Will Not" Fit OEM Komatsu Chains***
V4326065 Track Pin
D7655300N00 Master Pin Complete
V4295784 Track Bolt, M24 x 81mm Washer Head (Note: Use with VPI/Hitachi Shoe)
V4295785 Track Nut, M24 (Note: Use with VPI Rails)
V4328034 Track Bolt, M24 x 75mm Washer Head (Note: Use with OEM Komatsu Track Shoe)
V178.32.11220 Track Nut, M24 (Note: Use with OEM Komatsu Rails)
V4295783 Shoe,
Sh 3 B 600mm
600 w// 24
24mm B/H
V4295787 Shoe, 3 B 750mm w/ 24mm B/H
V4352992 Shoe, 3 B 900mm w/ 24mm B/H
Carrier Rollers
V4349517 KM3058 Carrier Roller
V4349517V KM3058 Carrier Roller (Optional)
Bottom Rollers
V4348373 KM3059 Bottom Roller
V4348373V KM3059 Bottom Roller (Optional)
Sprockets
N/A KM3076 Sprocket 21Tooth - 26 B/H
Idlers
N/A KM3060 Idler Group
Page 537
MODEL: KOMATSU PC650, PC710-5, PC750-6 & 7,
PC750LC-6 & 7, PC800-6
Specs Pitch= 10.25", Link Ht = 156mm, Bushing
O.D.=87.86mm, Bolt Dia= 27mm
Serial Nos: PC650: (47Lk)
PC650LC-3 (51Lk)
PC650LC-5 (51Lk)
PC710SE-5: (47Lk)
PC750-6 & 7: (46LK)
PC750LC-6 & 7: (51LK)
PC800-6: (47LK)

Your Track Groups
VKM596 Link Segment
VKM431 Track Pin
VKM432 Master Pin
VKM976/700 Shoe, 2 B 700mm
VKM976/900 Shoe, 2 B 900mm
VKM976/1010 209-32-11411 Shoe, 2 B 1010mm
Carrier Rollers
VKM2160 195-30-00580 Carrier Rollers
VKM2160V 195-30-00580 Carrier Rollers (Optional)
209-30-00300 Carrier Rollers (For PC750-7 Models)
Bottom Rollers
VKM2143 209-30-00191 Roller, S/F
VKM2143V 209-30-00191 Roller, S/F (Optional)
Sprockets
209-27-51172 Sprocket, 25-Bolt Hole
195-27-31640 Sprocket Bolt
V01803-02430 01803-02430 Sprocket Nut
209-27-51173 Sprocket (For PC750-6 & 7 Models)
Idlers
VKM2224 209-30-00014 Idler Group
Page 538
MODEL: KOMATSU PC1000-2, PC1100-6
Specs Pitch= 280mm, Bolt Dia= 33mm
Serial Nos: PC1000-2
PC1100-6: (48LK)
Chains and Track Groups

VKM2346/48 21N-32-00101
Your Track Groups
Track Hardware
21N-32-31211 Track Bolt 33mm
21N-30-31220 Track Nut 33mm
Track Shoes
Carrier Rollers
21N-30-00130 Carrier Rollers
Bottom Rollers
VKM2503 21N-30-00023 Roller Assembly S/F
Sprockets
21N-27-31191 Sprocket
Idlers
21N-30-00110 Idler Group
Page 539
MODEL: KUBOTA KX91-3
Page 540
MODEL: KUBOTA KX121-3
VRD118-22310V Rubber Track
Page 541
MODEL: KUBOTA KX161-3, KX161-3S
Page 542
MODEL: Leeboy Pavers 8000 BH Elite, 8500
Specs Pitch = 125mm, Link Ht = 63mm, Bushing OD =
31.97 mm , Bolt Hole = 10mm
Serial Nos: 8000: (26LK)
8500: (33Lk)
Unsealed Track Chains

Your Track Groups
VFT1335 Link Segment
Sealed & Greased Track Chains
VEY4007A0Y25 Chain, 25L, Sealed & Greased, w/ Press Fit Style M/P
Your Track Groups
V083180 Link, R/H
V083179 Link, L/H
V083183 Track Pin
V083184 Master Pin
V083185 Spacer For Master Pin
Sealed & Greased Track Chains w/ Snap Ring M/P
VEY400700Y25 Chain, 25L, Sealed & Greased, w/ Headed Style M/P (Snap Ring)
Your Track Groups
V083180 Link, R/H
V083179 Link, L/H
V083183 Track Pin
V083275 Master Pin Group
V083272 Master Pin
V083185 Spacer For Master Pin
Track Hardware
VFT1012 Track Bolt 10mm X 33.5mm
VFT1029 Track Nut 10mm Square
Track Shoes
V81490 Track Shoe Poly 305mm
Bottom Rollers
VVA576 Roller S/F
Sprockets
VVA1816 Sprockets - 17 tooth
Page 543
MODEL: Liebherr PR721C/721CM, PR731-
LR621/621B/621BM, LR621C
58.738 mm , Bolt Hole = 5/8"
Serial Nos: PR721C(42 LK)
PR721C-M(44 LK)
PR731: (40LK) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
LR621(40 LK)
LR621B(40 LK)
LR621C: S/N 278-1573: (40Lk)
Sealed w/Master Pin Track Chains and Track Groups

VCR2823/40 5002296 Chain, 40L, Sealed, w/ Master Pin
Your Track Groups
VCR255 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Sealed w/SML Track Chains and Track Groups
Your Track Groups
Page 544
VCR255 Sealed Pin
VCR2166 Seal Washer
VCR400240/16 Track Group, 40L, SALT, w/ SML, w/ 2 B 16" Shoe (Use CR4393/40/16 Proline)
Your Track Groups
VCR3585 Salt Pin
VCR3587 Thrust Ring
Your Track Groups
Page 545
Track Shoes
VCR3242/20 5002763 Shoe, 1 B 20"
VCR3242/20V 5002763 Shoe, 1 B 20" (Optional)
VCR3242/28 Shoe, 1 B 28 "
VCR3726/16 Shoe, 2 B 16" (without Mud Hole)
VCR3939/16 Shoe, Master, 2 B 16" (without Mud Hole)
VCR3726/18 Shoe, 2 B 18"
VCR3726/20 Shoe, 2 B 20"
VCR3726/22 Shoe, 2 B 22"
Track Hardware
Bottom Rollers
VCR1292 5002765 Roller Assembly, S/F
VCR1292V 5002765 Roller Assembly, S/F (Optional)
VCR1293 5003857 Roller Assembly, D/F
VCR1293V 5003857 Roller Assembly, D/F (Optional)
V9W7216 Seal Group
V8S5796 Bushing
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
V4D3704 Flat Washer
Carrier Rollers
VCR2881 5003858 Carrier Roller Assembly
V9W6647 Seal Group
Sprockets
VCR4408 Segment Group (9 Pieces 27 Teeth)
VCR4408V Segment Group (9 Pieces 27 Teeth) (Optional)
Idlers
VCR3189 5800068 Idler With Shaft (Qty needed 2) Note: Must use Liebherr brackets
VCR3189V Idler With Shaft (Qty needed 2) (Optional)
Page 546
MODEL: Liebherr LR622
LR622:(42LK)
SALT Components are Interchangeable with ITM Only

VCR4264/42 Chain, 42L, SALT, w/ SML, Proline Rail
VCR4264/42V Chain, 42L, SALT, w/ SML, Proline Rail (Optional)
Your Track Groups
Bottom Rollers
VCR1292 Roller Assembly S.F. (Qty needed 8)
VCR1292V Roller
R ll A Assembly
bl S/F (O
(Optional)
ti l)
VCR1293 Roller Assembly D.F. (Qty needed 4)
V4F0324 Key
V1H6227 Gasket
V9B2289 Pin
V1S8947 Gasket
V6H7382 Ring
V7F8267 Gasket
Carrier Rollers
VCR2881 Carrier Rollers (Qty needed 2)
VCR2881V Carrier Rollers (Qty needed 2) (Optional)
Idlers
VCR3189 Idler Group (Qty needed 2)
VCR3189V Idler Group (Qty needed 2) (Optional)
VCR3169 Idler Shell
VCR2096 Idler Shaft
V9W7216 Seal Group
V8S5796 Bushing
Sprockets
VCR4408 Segment Group (9-Pc) (Qty needed 2)
Page 547
VCR4408V Segment Group (9-Pc) (Qty needed 2) (Optional)
Page 548
MODEL: Liebherr PR731B, PR731B-L, PR731B-M
PR731C/731C-L, PR731C-M, PR732 Litronic,
LR631/631B
Serial Nos: PR731B: (37 LK) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
PR731B-L: (41LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
PR731B-M: (41LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
PR731C: (37LK) 8-S/F Rollers, 4-D/F Rollers, 4-Carrier Rollers
PR731C-L: (41LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
PR731C-M: (41LK) 8-S/F Rollers, 6-D/F Rollers, 4-Carrier Rollers
PR732 Litronic: (39LK) 8-S/F Rollers, 6-D/F Rollers, 2-Carrier Rollers
LR631(37 LK)
LR631B(37 LK)

VCR3176/36 Chain, 36L, Sealed, w/ Master Pin Bush OD(66.67mm) (Reference AT64400AM)
VCR3176/37 5003808 Chain, 37L, Sealed, w/ Master Pin Bush OD (66.67mm)
Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR3307/36 AT64400AM1 Chain, 36L, Sealed, w/ SML (Bush OD=66.67mm)
VCR3307/36V AT64400AM1 Chain, 36L, Sealed, w/ SML (Bush OD=66.67mm) (Optional)
VCR3307/37 Chain, 37L, Sealed, w/ SML (Bush. OD=66.67mm)
VCR3307/42 Chain, 42L, Sealed, w/ SML (Bush. OD=66.67mm)
Page 549
Your Track Groups
VCR3312/36 Pin and Bushing Group, 36LK-SML Type
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR3309/36V Chain, 36L, SALT, w/ SML (Bush OD=69.8mm) (Reference AT70783AM) (Optional)
Group, 42L
42L, SALT
SALT, w/ SML,
SML w/ 1 B 3232" Shoe
Your Track Groups
VCR3319 Salt Pin
VCR3321 Ring
VCR4416/37/24 Track Group, 37L, SALT, w/ SML, w/ 1 B 24" Shoe, Proline Rail
VCR4416/3724V Track Group, 37L, SALT, w/ SML, w/ 1 B 24" Shoe, Proline Rail (Optional)
Page 550
Your Track Groups
VCR3313/36 Pin and Bushing Group, 36 LK (Use When Replacing Pins and Bushings on CR4267
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
VCR2084/18 Shoe, 1 B 18"
VCR2084/20 5003911 Shoe, 1 B 20"
VCR2084/20V 5003911 Shoe, 1 B 20" (Optional)
VCR2084/24 Shoe, 1 B 24"
VCR2084/24V Shoe,
Sh 1 B 24" (O
(Optional)
ti l)
VCR2084/26 Shoe, 1 B 26"
VCR2084/28 Shoe, 1 B 28"
VCR2084/32 Shoe, 1 B 32"
VCR3324/17 Shoe, 2 B 17"
VCR3324/18 Shoe, 2 B 18"
VCR3324/20 Shoe, 2 B 20"
VCR3324/22 Shoe, 2 B 22"
Bottom Rollers
VCR1793 5003815 Roller Assembly, S/F (5/8" bracket bolt hole)
VCR1793V 5003815 Roller Assembly, S/F (5/8" bracket bolt hole) (Optional)
VCR1792 5003816 Roller Assembly, D/F (5/8" bracket bolt hole)
VCR1792V 5003816 Roller Assembly, D/F (5/8" bracket bolt hole) (Optional)
Page 551
V9W6647 Seal Group
V8S5349 Bushing
VCR1656 Key
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V2S0115 Flat Washer
Carrier Rollers
VCR2650 5003817 Carrier Roller Assembly (Qty 4)
V9W6647 Seal Group
Idlers
VCR1833 5003814 Idler With Shaft
VCR1833V 5003814 Idler With Shaft (Optional)
VCR1834 Idler Shell
V9W6647 Seal Group
V8S5349 Bushing
Sprockets
VCR3330 Segment Group D6C, D6D, 955L, 963, 963 LGP (25 Teeth) (5 pieces)
VCR3330V Segment Group D6C, D6D, 955L, 963, 963 LGP (25 Teeth) (5 pieces) (Optional)
Page 552
MODEL: Liebherr LR632
Specs Pitch = 7.984", Link Ht = 121.5 mm, Bushing
Diameter = 69.8mm, Bolt Diameter = 3/4"
Serial Nos: LR632:(39LK)

Your Track Groups
VCR3319 Salt Pin
VCR3321 Ring
Your Track Groups
VCR3313/36 Pin and Bushing Group, 36L, (Can Use When Replacing Pins and Bushings on CR4267
Rail)
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
VCR3324/20 Shoe, 2 B 20"
VCR3324/22 Shoe, 2 B 22"
Bottom Rollers
Page 553
V9W6647 Seal Group
VCR1656 Key
V2H3928 Gasket
V9B2289 Pin
V1S8947 Gasket
V5F8000 Gasket
V2S0115 Flat Washer
V5M4443 Snap Ring
Carrier Rollers
VCR2650 Carrier Roller Assembly (4 Required)
VCR2650V Carrier Roller Assembly (4 Required) (Optional)
V9W6647 Seal Group
Page 554
MODEL: Liebherr PR741, PR741B, PR741C, LR641
OD = 71.44mm, Bolt Hole = 3/4"
Serial Nos: PR741(38 LK)
PR741B(38 LK)
PR741C(38 LK)
LR641(38 LK)

VCR2576/38V Chain, 38L, Sealed, w/ Master Pin (Bushing OD = 71.4mm) (Optional)
Your Track Groups
VCR1538 Sealed Pin
VCR1541 Seal Washer
C 53
VCR1537 Sea ed Master
Sealed aste Pin
VCR1540 Spacer
VCR3308/38 Chain, 38L, Sealed, w/ SML (Bushing OD = 71.4mm)
VCR3308/38V Chain, 38L, Sealed, w/ SML (Bushing OD = 71.4mm) (Optional)
Your Track Groups
VCR1538 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR3116/38 Chain, 38L, SALT, w/ SML (Bushing OD = 74.6mm)
VCR3116/38V Chain, 38L, SALT, w/ SML (Bushing OD = 74.6mm) (Optional)
Page 555
Your Track Groups
VCR3114 Salt Pin
VCR3215 Ring
Track Hardware
Track Shoes
VCR2086/24 Shoe, 1 B 24"
VCR2086/34 Shoe, 1 B 34"
VCR2604/20 Shoe, 1 B 20" ESS
VCR2604/24 Shoe, 1 B 24" ESS
VCR2604/26 Shoe, 1 B 26" ESS
VCR3167/26 Shoe,
Sh Master,
M t 1 B 26" ESS
VCR2604/28 Shoe, 1 B 28" ESS
Bottom Rollers
V9W6647 Seal Group
VCR2609 Shaft
V8S2539 Bushing
VCR2612 Key
V2H3928 Gasket
V9B2289 Pin
V2P0347 Gasket
V8F6711 Seal
V1S8947 Gasket
Carrier Rollers
V9W6647 Seal Group
Sprockets
VCR3148 Segment Group (5 pieces 25 teeth)
Page 556
VCR3148V Segment Group (5 pieces 25 teeth) (Optional)
Page 557
MODEL: Liebherr PR742
Serial Nos: PR742: (43LK)

Your Track Groups
VCR4782 AT279196 Split Link Master Complete L.H..
VCR4781 AT279195 Split Link Master Complete R.H..
VCR4787 AT278865 Track Link R.H..
VCR4788 AT278866 Track Link L.H..
VCR5939 T189531 Track Bushing
VCR3114 T189365 Track Pin
VCR3215 T189370 Thrust Ring
VCR3191 Plug With Stopper
Track Hardware
V7H3599 Track Bolt 7/8 X 2.23/32"
V7T9825 Track Nut 7/8"
V9W9058 Master Bolt (4- Required)
Track Shoes
VFT1461/24 Shoe,
Sh 1 B 24" ESS (NOTE:
(NOTE MUST ReamR from
f 20mm
20 to
t 23mm)
23 )
VFT1461/26 Shoe, 1 B 26" ESS (NOTE: MUST Ream from 20mm to 23mm)
VFT1461/36M Shoe, 1 B 36" ESS, w/ Mud Hole (NOTE: MUST Ream from 20mm to 23mm)
Bottom Rollers
V9W6647 Seal Group
VCR2609 Shaft
V8S2539 Bushing
VCR2612 Key
V2H3928 Gasket
V9B2289 Pin
V2P0347 Gasket
V8F6711 Seal
V1S8947 Gasket
Carrier Rollers
V9W6647 Seal Group
Sprockets
Page 558
VCR3148 Segment Group (5 pieces 25 teeth)
VCR3148V Segment Group (5 pieces 25 teeth) (Optional)
Page 559
MODEL: Liebherr PR752B
Serial Nos: PR752B: (44LK)

VCR4525/44 5801841 Chain, 44LK, SALT, w/SML (OLD STYLE D8N, D8R RAILS)
VCR4525/44V 5801841 Chain, 44LK, SALT, w/SML (OLD STYLE D8N, D8R RAILS) (Optional)
Your Track Groups
VCR4126 Salt Pin
VCR4127 Master Pin
VCR4130 Thrust Ring
Track Hardware
V6V1723 Track Bolt (7/8" x 3 3/8")
V7G6442 Track Nut
Track Shoes
VCR4227/22 Shoe, 1 B 22" ESS
VCR4227/24 Shoe, 1 B 24" ESS
VCR4227/26 Shoe, 1 B 26" ESS
VCR4227/30 Shoe, 1 B 30" ESS
VCR4227/36 Shoe, 1 B 36" ESS
Bottom Rollers
VLH1086V 5801601 Roller Assembly, SF
VCR4529 5801602 Roller Assembly, DF
Roller Shell w/Bushings, SF
V9W6649 Seal Group
V5P8249 Flat Washer
V6T1140 Bolt
Carrier Rollers
VLH1292 5802011 Carrier Roller Assembly
V9W7220 Seal Group
Page 560
MODEL: Liebherr PR751
Specs Track Pitch = 9", Link Height = 138 mm, Bushing OD
= 80.4 mm, Bolt Hole= 7/8"
Serial Nos: PR751(41 LK)

p
Your Track Groups
VD8KSMLPIN Joining Pin for Split Master Link (Extra)
VCR3852 Salt Pin
VCR3212 Ring
Track Hardware
V2S2140 4129306 Track Shoe Nut 7/8"
V8S0395 7403846 Master Link Bolt, 7/8"
Track Shoes
VCR2089/22 Shoe, 1 B 22"
VCR2089/24 Shoe, 1 B 24"
VCR2089/26 Shoe, 1 B 26"
VCR2089/28 Shoe, 1 B 28"
VCR2089/30 Shoe, 1 B 30"
VCR2248/22 Shoe, 1 B 22" ESS
Page 561
VCR2248/24 Shoe, 1 B 24" ESS
VCR2248/26 Shoe, 1 B 26" ESS
VCR2248/28 Shoe, 1 B 28" ESS
VCR2248/30 Shoe, 1 B 30" ESS
Bottom Rollers
VCR2798 5800163 Roller Assembly, S/F
VCR2798V 5800163 Roller Assembly, S/F (Optional)
VCR2787 5800164 Roller Assembly, D/F
VCR2787V 5800164 Roller Assembly, D/F (Optional)
V9W7220 Seal Group
Carrier Rollers
VCR3512 5605506 Carrier Roller Assembly (Qty 4)
VCR3512V 5605506 Carrier Roller Assembly (Qty 4) (Optional)
V9W6647 710924101 Seal Group
Idlers
V9W7220 7109240 Seal Group
Sprockets
VCR3144 Segment Group (9 Pieces - 27 Teeth)
VCR3144V Segment Group (9 Pieces - 27 Teeth) (Optional)
V9S2727 5800146 Sprocket Bolt (27 Needed)
V7H3609 5800147 Sprocket Nut (27 Needed)
V9W6690 Seal Group
Page 562
MODEL: Liebherr R911CHD, R912HD, R912HDS,
R921BHD(First & Second Type), R921CHD(First
& Second Type), R921HD, R922HD,
R925(Second Type), R925B, R932HD,
R932HDSL, R941(First & Second Type), R941B,
R941BLC, R941LC, R942, R942LC, R945(First
Type),
Specs Pitch= 171.1mm, Link Ht = 101.6mm, Bushing O.D. =
Serial Nos: R911CHD: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R912HD: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers
R912HDS: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R921BHD First Type: (45Lk) 14-Bottom Rollers, 2-Carrier Rollers
R921BHD Second Type: (47Lk) 14-Bottom Rollers, 2-Carrier Rollers
R921CHD First Type: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R921CHD Second Type: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers
R925 Second Type: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers
R925B: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers
R932HDSL: (59Lk) 22-Bottom Roller, 4-Carrier Rollers
R941 First Type: (47Lk) 14-Bottom Rollers, 4-Carrier Rollers
R941BLC: (58Lk) 20-Bottom Rollers, 4-Carrier Rollers
R941LC: (56Lk) 18-Bottom Rollers, 4-Carrier Rollers
R942: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers

VCR2006/45 5604139 Chain, 45L, Unsealed, w/ Master Pin
VCR2006/49V 5602744 Chain, 49L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
Page 563
VCR255 Sealed Pin
VCR1605 Master Pin
VPC57 Spacer
Track Hardware
Track Shoes
VCR3229/20 Shoe, 3 B 500mm
VCR3229/22 Shoe, 3 B 560mm
VCR3229/24 Shoe, 3 B 600mm
VCR3229/28 Shoe, 3 B 700mm
VCR3229/30 Shoe, 3 B 750mm
VCR3229/36 Shoe, 3 B 900mm
Bottom Rollers
VKL18 5601352 Roller Assembly S/F
VKL18V Roller Assembly S/F (Optional)
Carrier Rollers
V5605641 5605641 Carrier Rollers
Idlers
LH485 5601564 Idler Group
VDE14 2206265 Idler Group (R912HD, R932HD)
Sprockets
VLH188 3000617 Sprocket Rim 27T
5209467 Sprocket Rim (For R941 Models)
Page 564
MODEL: Liebherr R310B, R312, R900LC (Second Type),
R901C, R902LC (First Type), R911 (Second
Type), R911B, R911BLC, R911C, R911CLC,
R911HD, R911LC (Second Type), R912 (First
Type), R912LC (First Type) R921 (First &
Second Type), R921B, R921BLC, R921C,
R921CLC, R921LC, R922, R922LC (First Type),
R925 (First Type)
Serial Nos:
R901C: (47Lk) 14-Bottom Rollers, 2-Carrier Rollers
R911CLC: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers
R911HD: ((39Lk)) 14-Bottom Rollers,, 2-Carrier Rollers
R921CLC: (54Lk) 20-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR4874/51 Pin & Bushing Group 51 LK Unsealed With Master Pin
VCR3198 Link, R/H
Page 565
VCR3199 Link, L/H
VCR3194 Master Pin
VCR3196 Track Pin
VCR3197F Spacer
Track Hardware
V7H3596 Track Bolt 9/16" X 1.15/16"
Track Shoes
Bottom Rollers
VPC377 5601365 Roller Assembly
VPC377V Roller Assembly (Heavy Duty)
Carrier Rollers
VCR2880 5601364 Carrier Rollers
VCR2880V Carrier Roller (Heavy Duty)
PC377 Carrier Roller (For R911, R911HD, R911LC)
VPC377V Carrier Roller (For R911, R911HD, R911LC) (Optional)
Sprockets
N/A
Idlers
VLH492 5602249 Front Idler With Brackets (Fits All Models Except R911 Second Type, R911B, R911BLC, R911HD,
R911LC Second Type, R921 First Type, R921LC, R925 First Type)
Page 566
MODEL: Liebherr R941BHD, R941HD, R942HD,
R942HD(Litronic), R942HDS,
R942HDS(Litronic), R942HDSL(Litronic), R945,
R945B, R961, R944HDS (Litronic), R944HDSL
(Litronic)
Serial Nos: R941BHD: (45Lk) 14-Bottom Rollers, 4-Carrier Rollers
R942HD Litronic: (51Lk) 20-Bottom Rollers, 4-Carrier Rollers
R942HDSL Litronic: (52Lk) 22-Bottom Rollers, 4-Carrier Rollers
R944HDS Litronic: (51Lk)
R944HDSL Litronic
R961 Third Type: (45Lk) 14-Bottom Rollers, 4-Carrier Rollers

VCR5060/51HDV Chain, 51L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
VCR1770 Link, R/H
VCR1771 Link, L/H
VCR1631 Master Pin
VD01070E0N10 Spacer
Track Shoes
Track Hardware
V1S1859 Track Bolt 3/4" X 2.13/64
Bottom Rollers
V5618394 5601872 Roller Assembly S/F
VLH27 Roller Assembly S/F (For R944HDS, R944HDSL Models)
VLH27V Roller Assembly S/F (For R944HDS, R944HDSL Models) (Optional)
Carrier Rollers
Page 567
V5604047 Carrier Rollers
V5618394 5601872 Roller Assembly S/F (Carrier Roller R941HD, R961 First and Second Type)
V5615338 5615338 Carrier Rollers (For R944HDS, R944HDSL Models)
Idlers
V5209270 Idler Group Note: Will not work on 944HDSL Models
5604043 Idler Group (For R942HD, R942HDS Models)
Sprockets
VLH198 Sprocket Rim 23T
Page 568
MODEL: Liebherr R952(Litronic) R952HD,
R952HD(Litronic), R954(Litronic),
R954HD(Litronic), R961B, R961BLC, R961HD,
R962LC, R962LC(Litronic), R965, R965B, R971
Specs Track Pitch = 215.9mm, Link Height = 126 mm,

Bushing Dia.= 71.4mm Track Bolt Diameter =3/4"
Serial Nos: R952 Litronic: (52Lk) 20-Bottom Rollers, 4-Carrier Rollers
R954 Litronic: (52Lk) 20-Bottom Rollers, 4-Carrier Rollers
R962LC Litronic: (52Lk) 20-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
Your Track Groups
VCR4727HD Track Pin
VCR4728 Master Pin
Track Shoes
Page 569
Track Hardware
Bottom Rollers
VLH90 5209264 Roller Assembly S/F (For R961HD, R971 Model)
VLH90V Roller Assembly S/F (Optional) (For R961HD, R971 Model)
Carrier Rollers
VLH90 5209264 Carrier Roller Assembly S/F (For R961HD, R971 Model)
VLH90V Carrier Roller Assembly S/F (Optional) (For R961HD, R971 Model)
Idlers
V5209270 5603477 Idler Group
5604043 Idler Group (For R952HD Models)
V5607652 Idler Group (For R954 & R962 Litronic Models)
Sprockets
VLH664 Sprocket Rim 21T (For R952HD Model)
V14023979 Sprocket Rim (For Litronic Models)
Page 570
MODEL: Liebherr R961BHD, R962HD(First Type),
R965BHD, R971HD, R972HD, R981, R981LC,
R982LC
Specs Track Pitch = 228.6mm, Link Height = 138mm,
Serial Nos: R961BHD: (50Lk) 16-Bottom Rollers, 4-Carrier Rollers
R962HD First Type: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R965BHD: (50Lk) 16-Bottom Rollers, 4-Carrier Rollers
R972HD First Type: (50Lk) 16-Bottom Rollers, 4-Carrier Rollers
R982LC First Type: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
Track Shoes
VCR3400/20 5002667 Track Shoe, 3 B 20"
VCR3400/24 Track Shoe
Shoe, 3 B 24"
24
Track Hardware
V9M7444 Track Shoe Bolt, 7/8" X 2.41/64
Bottom Rollers
VWS39 5601511 Roller Assembly S/F
Carrier Rollers
VCR3512V 5601508 Carrier Roller Assembly (Optional)
Idlers
5601876 Idler Group
Sprockets
5601879 Sprockets
Page 571
MODEL: Liebherr R962HD(Litronic), R962HD(Second
Type), R964(Litronic), R964B,
R964HD(Litronic), R972HD(Second Type),
R982LC(Second Type)
Bushing OD = 76.10mm, Bolt Hole= 1"
Serial Nos: R962HD Litronic: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R962HD Second Type: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
R964 Litronic: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers
964B: S/N 6255015 (52LK) Confirm Link # Before Ordering. LH1155 Is for
Berco Chains Only (LH1154/52 & LH1350/52)
R972HD Second Type Type: (50Lk) 16-Bottom Rollers, 4-Carrier Rollers
R982LC Second Type Type: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR3127 Link Segmentt
Li k S
VCR2725 Pin
VCR1560 Bushing
VCR1558 Spacer
Track Shoes
VCR3401/36 Shoe, 3 B 36"
Track Hardware
V9M7445 Track Bolt 1" X 2 31/32 (Use with 2 BAR Shoe)
V3T6308 Track Bolt 1" X 3 5/16 (Use with 3 BAR Shoe)
V2V0250 Track Nut 1" (Stepped Nut)
Bottom Rollers
VWS39 5601511 Roller Assembly S/F
Carrier Rollers
VCR3512V 5601508 Carrier Roller Assembly (Optional)
Idlers
5601876 Idler Group
Sprockets
5606201 Sprockets
Page 572
MODEL: Liebherr R982HD
Specs Track Pitch = 260mm, Link Height = 156mm, Bushing
OD = 85.6 mm, Bolt Hole= 1.1/8"
Serial Nos: R982HD:(49 LK) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
Track Hardware
V5P3868 Track Bolt, 1.1/8" X 107mm
V70671868 Track Nut 1.1/8"
Track Shoes
VZR5802001040 Shoe, 2 B 40"
Bottom Rollers
VLH178 5604008 Roller Assembly, S/F
Carrier Rollers
VCR1728 Carrier Rollers (12" Shell Diameter)
Page 573
MODEL: Liebherr R992, R992 Litronic, R994
Bushing OD = 104.7mm, Bolt Hole= 1.1/8"
Serial Nos: R992: (49 LK) 18-Bottom Rollers
R992 Litronic: (49LK) 18-Bottom Rollers
R994: (57LK) 20-Bottom Rollers

N/A Chain, 49L, Unsealed, w/ Master Pin
Your Track Groups
Track Hardware
N/A
N/A
Track Shoes
N/A
N/A
Bottom Rollers
Carrier Rollers
N/A
Page 574
MODEL: Liebherr R992HD Litronic
Bushing OD = 101.54mm, Bolt Hole= 30mm
Serial Nos: R992HD Litronic: (51LK)

Your Track Groups
Track Hardware
N/A
N/A
Track Shoes
N/A
N/A
Bottom Rollers
Carrier Rollers
N/A
Page 575
MODEL: Linkbelt 75LX, 80LX
Serial Nos: 75LX: (39Lk)
80LX: (39Lk)

VKM3041/39HD KAA1174 Chain, 39L, Sealed & Greased, w/ Master Pin
VKM3041/39HDV KAA1174 Chain, 39L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
Track Hardware
Track Shoes
VKM1685/450 KAA1175 Shoe, 3 B 450mm
VKM1685/450V KAA1175 Shoe, 3 B 450mm (Optional)
VAT183364 2041367 Shoe, 3 B 600mm
Bottom Rollers
KAA1160 Roller Assembly, S/F
Carrier Rollers
KAA1182 Carrier Rollers
Idlers
KAA1154 Idler Group
Page 576
MODEL: LinkBelt LS2650C-II, LS2650Q, 130LX
Serial Nos: LS2650C-II: (44Lk)
LS2650Q: (44Lk)
130LX: (43LK) 14-Bottom Rollers, 2-Carrier Rollers

VCR4854/44 KNA0347 Use Unsealed or Sealed & Greased Chains
Your Track Groups
VCR4876/47 Pin & Bushing Group, 47 LK-Master Pin Type
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
VCR4854/44F Chain, 44L, Unsealed
Chain 44L Unsealed, w/ Master Pin
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Page 577
Your Track Groups
VT55263HD Track Pin
VT55263HD Track Pin
Track
T kH Hardware
d
Track Shoes
Bottom Rollers
KNA0242 Outer Flange Roller (For LS2650C-II)
KNA0246 Inner Flange Roller (For LS2650C-II)
KNA0532 Outer Flange Roller (For LS2650Q)
KNA0533 Inner Flange Roller (For LS2650Q)
KNA0693 Roller Assembly (130LX Model)
Carrier Rollers
VLK31 KRA1267 Carrier Rollers (For 2650C-II Only)
VLK31V Carrier Rollers (Optional) (For 2650C-II Only) (Can Use VKTA1251V)
161705A1 Carrier Roller (130LX Model)
Sprockets
VKNA0323V 150866A1 Sprocket (LS2650Q) (130LX - Prior to Ser # DAC0713102) (KNA0867)
N/A KNA1256 130LX (After Ser # DAC0713102) (KNA0826)
Page 578
Idlers
VKNA0540V KNA0375 Idler Group With Brackets (For LS2650Q, 130LX Models)
Page 579
MODEL: LinkBelt LS2700C-II
Serial Nos: LS2700C-II: (47Lk) 14-Bottom Rollers, 4-Carrier Rollers

VHT17/47 KLA0019 Chain, 47L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Track Hardware
Track Shoes
VHT20/700 2022495 Shoe,
Sh 3 B 700mm
700
Bottom Rollers
VLK29V KRA0781 Outer Flange Roller Assembly
VLK30V KRA0785 Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
VLK31 KRA1267 Carrier Rollers
Idlers
VPV128400Y00 KRA0946 Idler Group Complete With Side Bar
Sprockets
VKLA0011 Sprockets
Page 580
MODEL: LinkBelt LS2700Q, 160LX, 210LX, 225LX, 240LX

Serial Nos: LS2700Q: (43Lk) 14-Bottom Rollers, 4-Carrier Rollers
160LX: (43Lk) 14-Bottom Rollers, 2-Carrier Rollers
225LX: (49LK)

VCR5350/43 KLA0087 Chain, 43L, Sealed, w/ Master Pin
VCR5350/49 KRA1512 Chain, 49L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Your Track Groups
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 581
Bottom Rollers
VLK30V KRA0785 Inner Flange Roller Assembly
VKRA1189V KRA1189 Outer Flange Roller Assembly (For 160LX, 210LX, 225LX, 240LX Models)
Carrier Rollers
Idlers
VKRA1198V 166099A1 Idler With Brackets (For LS2700Q & 160LX, 210LX, 225LX, 240LX Models)
Sprockets
VKLA0083V 161299A1 Sprocket, 21-Tooth, 21-Bolt Hole (For LS2700Q Model)
C 5606
VCR5606V 0 58
KLA0158 Sp oc et, 21-Tooth,
Sprocket, oot , 22-Bolt
o t Hole
o e (For
( o 160LX
60 Models)
ode s)
VLK105V KRA1109 Sprocket, 21-Tooth, 22-Bolt Hole (For 210LX, 225LX, 240LX Models)
Page 582
MODEL: LinkBelt LS2800, A, B, LS2800AJ (First Type)
Serial Nos: LS2800: (47LK)
LS2800A: (47LK)
LS2800AJ, First Type: (47Lk)
LS2800B: (48Lk)
NOTE: **Verify Bolt Hole size before ordering track chains**

VCR2006/47 Chain, 47L Unsealed, w/ Master Pin
VCR2006/48 Chain, 48L Unsealed, w/ Master Pin
Your Track Groups
VCR255 Sealed Pin
VCR1605 Master Pin
VPC57 Spacer
Track Hardware
(5/8 )
Bottom Rollers
VLK30V KRA0785 Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
BRA0260 Carrier Rollers
Idlers
BRA0679 Idlers (LS2800 Model)
KRA0009 Idlers (LS2800A Model)
KRA0603 Idlers (LS2800B Model)
Sprockets
BRA0733 Sprockets (LS2800 Model)
KRA0141 Sprockets (LS2800A Model)
KRA0436 Sprockets (LS2800B Model)
Page 583
MODEL: LinkBelt LS2800-2, LS2800C, LS2800C-2,
LS2800AJ(Second Type) LS2800FJ, LS2800J
Serial Nos: LS2800-2: (47LK)
LS2800AJ, Second Type: (47Lk)
LS2800C: (53Lk)
LS2800C-2:(53LK)10-Outer Flange Roller, 6-Inner Flange Roller, 4-Carrier
Rollers
LS2800FJ: (48Lk)
LS2800J: (53Lk)

VHT21/52/600 Track Group, 52L, Sealed, w/ Master Pin, W/ 3 B 600mm Shoe
Your Track Groups
VCR4795 Sealed Pin
VCR2163TH Sealed Bushing g
VCR2166 Seal Washer
V9093376HD Chain, 52L, Sealed & Greased, w/ Master Pin (Note: Add Link Segment for 53 Link)
Your Track Groups
VPBG225DRHD Pin and Bushing Group, 48 LK
VHT19HD Track Link, L.H..
VHT18HD Track Link, R.H..
VCR2166HD Seal Washer
Track Shoes
VHT20/700 2022495 Shoe, 3 B 700mm
Page 584
Track Hardware
V79039443 Track Bolt 18mm X 55 (Washer Head)
Bottom Rollers
VLK29V Roller Assembly, S/F-Excavator Style (LS2800)
VLK30V Inner Flange Roller Assembly, S/F-Excavator Style
Carrier Rollers
VLK31 Carrier Roller (LS2800)
VLK31V Carrier Roller (LS2800) (Optional) (Can Use VKTA1251V)
Idlers
VKRA0946V KRA0946 Idler Group (Optional)
Sprockets
VKRA1078V KRA1078 Sprocket 23-Tooth, 22-Bolt Hole
Page 585
MODEL: LinkBelt LS2800Q, LS2800Q TL
LS2800Q TL: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
VCR5350/51HDV Chain, 51L, Sealed & Greased
Your Track Groups
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 586
Bottom Rollers
VKRA1189V KRA1189 Outer Flange Roller Assembly, S/F-Excavator Style (For LS2800Q Model)
VKRA1190V KRA1190 Inner Flange Roller Assembly, S/F-Excavator Style (For LS2800Q Model)
VKBA1047V KBA0869 Outer Flange Roller Assembly, S/F-Excavator Style (For LS2800Q TL Model)
VKBA1050V KBA0870 Inner Flange Roller Assembly, S/F-Excavator Style (For LS2800Q TL Model)
Carrier Rollers
VLK31 KRA1302 Carrier Roller Assembly (For LS2800Q Model)
VLK31V Carrier Roller Assembly (For LS2800Q Model) (Optional) (Can Use VKTA1251V)
VKRA1190V KRA1190 Carrier Roller (For LS2800Q TL Model)
Idlers
VKRA1198V Idler With Brackets (For LS2800Q Model)
VKBA0877V KBA0877 Idler (For LS2800Q TL Model)
Sprockets
VLK105V KRA1109 Sprockets 21-Tooth, 22-Bolt Hole
Page 587
MODEL: Linkbelt LS3400C, LC3400C-II, LS3400FJ
(Second Type)
Serial Nos: LS3400C: (52LK) 18-Bottom Rollers, 4-Carrier Rollers
LS3400C-II: (52Lk) 18-Bottom Rollers, 4-Carrier Rollers
LS3400FJ: (48LK) Second Type
** NOTE: VERIFY BOLT HOLE SIZE IF PERFORMING A PAD SWAP BEFORE ORDERING
CHAINS FOR LS3400C-II **

Your Track Groups
V031265 Spacer
Your Track Groups
Page 588
Track Shoes
VKM783/700 Track Shoe
Shoe, 3 B 700mm
Track Hardware
Bottom Rollers
VKBA1047V KBA0432 Outer Flange Roller Assembly
VKBA1050V KBA0433 Inner Flange Roller Assembly
Carrier Rollers
VKBA0486 Carrier Roller Assembly
Idlers
KBA0666 Idler Group Complete With Side Bar
Sprockets
VKBA0425V KBA0425 Sprockets
Page 589
MODEL: Linkbelt LS3400Q
Serial Nos: LS3400Q:(51Lk) 10-Outer Flange B/R, 8-Inner Flange B/R, 4-Carrier Roller

VCR5350/51 KBA0920 Chain, 51L, Sealed, w/ Master Pin
Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
Your Track Groups
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 590
Bottom Rollers
VKBA1047V KBA0869 Outer Flange Roller Assembly
VKBA1050V KBA0870 Inner Flange Roller Assembly
Carrier Rollers
Idlers
VKBA0877V KBA0877 Idler Group
Sprockets
VLK105V KRA1109 Sprockets 21-Tooth, 22-Bolt Hole
Page 591
MODEL: Linkbelt LS3400Q TL
Specs
Serial Nos: LS3400Q TL: (50Lk) 18-Bottom Rollers, 4-Carrier Rollers

VKTA0434 KBA0973 Chain, 50L, Sealed, w/ Master Pin
Your Track Groups
V081406 Link, R/H
V081405 Link, L/H
V081401 Master Pin
Track Hardware
Track Shoes
VZV158200N700 Shoe, 28" 2 B
V99I12 Shoe, 28" 3 B
V82619 Shoe, 32" 3 B
Bottom Rollers
VLK58 KSA0671 Outer Flange Roller Assembly
VLK58V KSA0671 Outer Flange Roller Assembly (Optional)
VLK59 KSA0672 Inner Flange Roller Assembly
VLK59V KSA0672 Inner Flange Roller Assembly (Optional)
Carrier Rollers
VLK59 KSA0672 Carrier Rollers
Idlers
KSA0659 Idler Group
Sprockets
VLK107 KSA0643 Sprocket 23-Tooth, 24-Bolt Hole
VLK107V KSA0643 Sprocket 23-Tooth, 24-Bolt Hole (Optional)
Page 592
MODEL: Linkbelt LS4300C-II

Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM959/50 KSA0692 Use KM959/50F or KM959/50HD
Your Track Groups
VKM1406/47 Pin and Bushing Group

Group, 47LK (AT170093)
Your Track Groups
VKM1365HD Track Pin
VCR1632HD Spacer
VTH111227 Snap Ring
VKM170HD Bushing
Track Hardware
Page 593
Track Shoes
Bottom Rollers
Carrier Rollers
KTA0699 Carrier Rollers
Idlers
VC8A0173 KSA0783 Idler Group
Sprockets
VLK107V KSA0643 Sprocket 23-Tooth, 24-Bolt Hole (Optional)
Page 594
MODEL: Linkbelt LS4300Q

VEV158600Y47 Chain, 47L, Sealed & Greased, w/ Master Pin
VKTA0434 C8A0255 Chain, 50L, Sealed & Greased, w/ Master Pin
Your Track Groups
V081406 Link, R/H
V081405 Link, LH
V081401 Master Pin
VCR1630HDM Seal Assembly "M" Style
VCR1632HDM Spacer
Track Hardware
Track Shoes
VZV158200N700 Shoe, 28" 2 B
V99I12 Shoe, 28" 3 B
V82619 Shoe,
Sh 32" 3 B
Bottom Rollers
Carrier Rollers
VLK60 KTA0825 Carrier Roller Assembly
VLK60V KTA0825 Carrier Roller Assembly (Optional)
Idlers
VC8A0173 KSA0783 Idler Group
Sprockets
VLK107V Sprocket 23-Tooth, 24-Bolt Hole (Optional)
Page 595
MODEL: Linkbelt LS4300Q TL
Serial Nos: LS4300Q TL: (49Lk) 16-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Shoes
Bottom Rollers
VKSA0835 C8A0286 Roller Assembly S/F
Carrier Rollers
VKSA0835 C8A0286 Roller Assembly S/F
Idlers
V173785A1 C8A0283 Idler Group
Page 596
Sprockets
VR14070B0Y01 KSA0826 Sprocket 23-Tooth, 24-Bolt Hole
VKSA0826V Sprocket 23-Tooth, 24-Bolt Hole (Optional)
Page 597
MODEL: Linkbelt LS5800C-II, LS5800Q, LS6000,
LS6000Q
LS5800Q: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers
LS6000: (51Lk)
LS6000Q: (51Lk)

VCR4235/51HD KTA0544 Chain, 51L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/51HDV KTA0544 Chain, 51L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VAT170096 Pin and Bushing Group,
Group 53 LK
VCR1540HD Spacer
V7H3599 Track Shoe Bolt, 7/8" x 2 23/32
V171335A1 Track Bolt M22 x 75mm (Use With Thick Track Shoe)
V79035320 Track Nut M22 (Use with Thick Track Shoe)
Track Shoes
Track Shoes
Page 598
Bottom Rollers
VKTA0674 KTA0674 Inner Flange Roller
VKTA0674V KTA0674 Inner Flange Roller (Optional)
VKTA0673 KTA0673 Outer Flange Roller
VKTA0673V KTA0673 Outer Flange Roller (Optional)
Carrier Rollers
KTA0699 Carrier Rollers
VLK60 KTA0958 Carrier Rollers (For LS5800Q Model)
VLK60V KTA0958 Carrier Rollers (For LS5800Q Model) (Optional)
Note: Will need to check serial numbers and confirm part number for correct carrier
rollers
Idlers
V171800A1 KTA0771 Idler Group
Sprockets
KTA0531 Sprockets
V171703A1 KTA1007 Sprocket (For LS5800Q, LS6000Q Models)
VKTA1007V KTA1007 Sprocket (For LS5800Q, LS6000Q Models) (Optional)
Page 599
MODEL: Linkbelt 240LX Timber Loader, 290LX, 330LX
Serial Nos: 240LX Timber Loader: (47Lk)
330LX: (48Lk)

VHT227/47HD KBA1146 Chain, 47L, Sealed and Greased, w/ Master Pin
VHT227/48HD KSA1166 Chain, 48L, Sealed and Greased, w/ Master Pin
Your Track Groups
VCR1540HD Spacer
VKM1426/600 KSA1106 Track Shoe, 3 B 600mm
Bottom Rollers
VKSA0835 Outer Flange Roller
Carrier Rollers
KBA1141 Carrier Roller Assembly
VKSA0835 KSA0835 Carrier Roller Assembly (For 240LX Timber Loader)
Page 600
Sprockets
V2404N431V KSA1061 Sprocket 21-Tooth, 26-Bolt Hole
Idlers
KSA1064 Idler Group
Page 601
MODEL: Linkbelt 370LX Timber Loader, 460LX
Serial Nos: 370LX Timber Loader: (48Lk)

VSI1057/48 Chain, 48L, Sealed & Greased, w/ Master Pin
VLS62D00003F2 KTA1186 Chain, 50L, Sealed & Greased, w/ Master Pin
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VKTA1106V KTA1106 Outer Flange Roller
Carrier Rollers
KSA1145 Carrier Roller Assembly
VKTA1106V KTA1106 Carrier Roller (370LX Timber Loader Model)
Sprockets
VLS51D01001P1 KTA1069 Sprocket
Idlers
KTA1097 Idler Group
Page 602
MODEL: Linkbelt 800LX
Serial Nos: 800LX: (51Lk) 18-Bottom Rollers, 6-Carrier Rollers

Your Track Groups
VKM596 Link Segment
VKM431 Track Pin
VKM432 Master Pin
Bottom Rollers
Outer Flange Roller
Carrier Rollers
Carrier Roller Assembly
Sprockets
Sprocket 21-Tooth, 26-Bolt Hole
Idlers
Idler Group
Page 603
MODEL: Madill 120 Yarder
Serial Nos:
120 Yarder: (48Lk)

Your Track Groups
VCR5497 Spacer
Track Hardware
V6Y0846 17185 Track Shoe Bolt
Bolt, 20mm X 63mm
V79035816 17186 Track Nut (20mm Square)
Track Shoes
Bottom Rollers
VCR5525 Roller Assembly, S/F (16-Required)
V7X2565 Bolt
V8T4123 Washer
Carrier Rollers
Idlers
VCR5884 Idler Group
VCR5884V Idler Group (Optional)
Sprockets
VCR5604 Sprocket 21-Tooth, 18-Bolt Hole
Page 604
MODEL: Madill 122, 124, 172, 255B Yarder
122 Yarder: (52 or 54Lk) Must confirm bolt hole size. Can be 3/4" or 7/8".
124 Yarder: (52 or 54Lk) Must confirm bolt hole size. Can be 3/4" or 7/8".
172 Yarder: (52Lk) Must confirm bolt hole size. Can be 3/4" or 7/8".
255B Yarder: (52Lk) Must confirm bolt hole size. Can be 3/4" or 7/8".
Sealed Chains 3/4" Bolt

"Must extend chain to desired length"
Your Track Groups
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
Sealed & Greased Chains 3/4" Bolt
VCR5061/51HD Chain, 51L, Sealed & Greased,
Chain 51L Greased w/ Master Pin (Bushing OD = 71.4mm)
71 4mm)
Your Track Groups
VCR4727HD Track Pin
VCR4728 Master Pin
Track Hardware
Sealed Chains 7/8" Bolt
Your Track Groups
VCR4247 Link, R.H.
VCR4248 Link, L.H..
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
Sealed & Greased Chains - 7/8" Bolt
VCR4235/52V Chain, 52L, Sealed, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Page 605
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Hardware
Track Shoes
Bottom Rollers
VLH90 Roller Assembly, S/F (122 & 124 Models Only)
VLH90V Roller Assembly, S/F (Optional) (122 & 124 Models Only)
Carrier Rollers
VCR2617 Carrier Roller (For 172B Yarder Model)
VCR2617V Carrier Roller (For 172B Yarder Model) (Optional)
Sprockets
VCR1591 1146 Weld on Sprocket Rim 25 tooth. (122 & 124 Models) Complete sprocket not available.
VKO114V Sprocket Bolt on (For 172B Yarder ONLY)
Idlers
V5000126 35056 Idler Group With Brackets (122 & 124 Models Only)
Page 606
MODEL: Madill 3200B & 3200C Feller Buncher, 3800B &
3800C Heel Boom
3200B Feller Buncher: (46Lk)
3200C Feller Buncher: (46Lk)
3800B Loader: (50Lk)
3800C Loader: (50Lk)

Your Track Groups
VCR4247 Link, R.H.
VCR4248 Link, L.H..
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Hardware
Track Shoes
Page 607
Bottom Rollers
V5618394 Roller Assembly, S/F (Heavy Duty)
Carrier Rollers
N/A Not Used
Sprockets
VKO114V Sprocket
Idlers
VKO76 58739 Idler Group With Brackets (For 3200C, 3800C )
VKO156V Idler Group HD With Brackets (For 3200C, 3800C)
V14024008 28890 Idler Group With Brackets (For 3200B/3800B & Early Model 3200C/3800C)
Page 608
MODEL: Madill 143 Tower Yarder, 075 Tower Yarder
Bushing OD = 76.10mm, Bolt Hole= 1"
Serial Nos:
143 Tower Yarder: (52Lk)

Your Track Groups
VCR2725 Pin
VCR1560 Bushing
VCR1558 Spacer
Track Hardware
V6T2638 Track Bolt 1 x 3 1/2
V2V0250 Track Nut 1"
Track Shoes
VCR3401/36 Shoe 3B 36"
Bottom Rollers
VWS39 Roller Assembly
Carrier Rollers
VWS39 Carrier Rollers
Sprockets
VR1408000Y01 Sprockets
V2M8810 Sprocket Rim 25T
Idlers
N/A OEM ONLY
Page 609
MODEL: Madill 144 Tower Yarder, 044 Tower Yarder
Bushing OD = 76mm, Bolt Hole= 7/8"
Serial Nos:

VFY4088D0Y61 Chain, 61L, Unsealed, w/ Master Pin
Your Track Groups
Track Hardware
V6V1723 Track Bolt 7/8" X 3.5"
Track Shoes
VCR3400/482 Shoe, 3 B 482mm w/o Mud Hole
VCR3400/900CC Shoe, 3 B 900mm w/o Mud Hole w/ Clipped Corners
Bottom Rollers
VWS39 Roller Assembly
Carrier Rollers
VWS39 Carrier Rollers
Sprockets
N/A OEM ONLY
Idlers
N/A OEM ONLY
Page 610
MODEL: Madill 2200B, 2800B Heel Boom
2200B Feller Buncher (47Lk)
2800B Heel Boom: (50Lk)

Your Track Groups
VCR3172 Link, R/H
VCR3173 Link, L/H
VCR1783 Track Pin
VCR1789 Master Pin
V082532 Spacer
Sealed & Greased Track Chains **121.5mm** Link Height
**Note: Current Sealed & Greased Track Chains Produced With "M" Type Seals**
**Call
Your Track Groups
VCR1632HD Spacer
VCR3176/47 Chain, 47L, Sealed, w/ Master Pin **Pro Link**
VCR3176/47V Chain, 47L, Sealed, w/ Master Pin **Pro Link** (Optional)
Page 611
VCR3176/50 Chain, 50L, Sealed, w/ Master Pin **Pro Link**
VCR3176/50V Chain, 50L, Sealed, w/ Master Pin **Pro Link** (Optional)
Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Track Hardware
V1S1859 Track Bolt 3/4" X 2.13/64
Track Shoes
VCR3324/26M Track
T k Shoe,
Sh 2 B 26",
26" w// Mud
M d Hole
H l
Bottom Rollers
V5618394 Roller Assembly, S/F (Heavy Duty)
Carrier Rollers
Sprockets
VKO162 Sprocket
Idlers
VKO76 Idler Group With Brackets
Page 612
MODEL: Madill 4800
Specs Track Pitch = 9", Link Height = , Bolt Diameter =
22mm
Serial Nos: 4800: (51LK) 18-Bottom Rollers, 6-Bottom Roller as Carrier Rollers
**Some Machines may have had Factory Track Groups reamed from 22mm to 1" bolt hole**
***Must Confirm before Ordering***

Your Track Groups
8E6091 Link, R/H
8E6092 Link, L/H
8E6093 Trk Pin
8E6094 Master Pin
8E6095 Trk Bushing
8E6096 Master Bushing
Track Shoes
V8E6097 8E6097 Shoe, 3 B 600mm w/ Mud Hole
V8E6099 8E6099 Shoe, 3 B 900mm w/ Mud Hole
Track Hardware
V6Y9024 6Y9024 Track Shoe Bolt, 22mm X 66mm
V79035320 9W4381 Track Nut (22mm Square)
Bottom Rollers
V1890475V 152-4129 Roller Assembly
Carrier Rollers
V8E4623V 8E4623 Carrier Rollers
Idlers
Sprockets
VCR6402V 8E6974 Sprocket
V7X2575 7X2575 Sprocket Bolt (23-Required for each sprocket)
Page 613
MODEL: Mitsubishi BD2, BD2F/G/H/J
Specs Check Pitch 1/2" Bolt Hole
Serial Nos:
BD2, BD2F/G/H/J

VMT24/38V Chain, 38 Link, Sealed & Greased
VMT24V Link Segment
Track Hardware
V616191C1 Track Bolt 1/2" x 1 11/16
Bottom Rollers
V58845-10010 Roller, SF
Page 614
MODEL: Mustang MTL16
V08801-30000V Bottom Roller
V08801-40000V Front Idler
V08801-66210V Sprocket
Page 615
MODEL: Mustang MTL20
V08821-60010V Sprocket (confirm sprocket ID 200mm)
V08811-60110V Sprocket (confirm sprocket ID 242mm)
Page 616
MODEL: Mustang MLT25
V08811-60110V Sprocket
Page 617
MODEL: New Holland DC70-LT/LGP
Specs 5.5" Pitch: Check with OEM
Serial Nos:
DC70-LT: (39LK) 12-Bottom Rollers, 2 Carrier Rollers
DC70-LGP: (43LK)
Carrier Rollers
VLA337 Carrier Roller Assembly (For DC70 Model)
Page 618
MODEL: New Holland DC80-LT/LGP
Specs 6.125" Pitch, Link HT = 84mm, Bushing OD = 46.8
mm, 9/16" Bolt Hole
Serial Nos:
DC80-LT: (39LK) 12-Bottom Rollers, 2-Carrier Rollers
DC80-LGP: (43LK)

Your Track Groups
Your Track Groups
VCR4773 6Y0650 Bushing
VCR1620 4K4078 Master Pin Complete-For Dry Track Chain Only
Track Shoes
VCR4583/14 Shoe, 1 B 14" (6Y1328)
VCR4584/14 Shoe, Master, 1 B 14" (6Y1329)
VCR4584/14V Shoe, Master, 1 B 14" (6Y1329) (Optional)
VCR4583/16 Shoe, 1 B 16" (6Y1381)
VCR4583/16V Shoe, 1 B 16" (6Y1381) (Optional)
VCR4583/18 Shoe, 1 B 18"
VCR4583/20 Shoe, 1 B 20"
Page 619
VCR4583/25 Shoe, 1 B 25" (6Y1385)
VCR4583/25V Shoe, 1 B 25" (6Y1385) (Optional)
VCR3656/14V Shoe, 3 B 14" (with mud hole) (Optional)
Track Hardware
V4K7038 Track Shoe Bolt, 9/16"
V7K2017 Track Shoe Nut, 9/16"
V5P4684 Master Link Bolt
Bottom Rollers
VCR3000 Roller Assembly, S/F
VCR3000V D3 RLR GP SF (3T4352) Optional
VCR3001 Roller Assembly, D/F
VCR3001V D3 RLR GP DF (3T4353) Optional
V9W7207 Seal Group
V6Y4744 Bushing
VCR3067 Rubber Seal
V0S1585 Roller Mounting Bolt (1/2" x 1 1/2")
V2M0849 Hard Washer
Carrier Rollers
VCR3002 Carrier Roller (For DC80 Model)
VCR3002V Carrier Roller (For DC80 Model) (Optional)
Idlers
VVA1618 Idler Complete (For DC80 Model)
Sprockets
VCR4754 Segment Group (MUST USE OEM MOUNTING HARDWARE)
VCR4754V Segment Group (Optional) (MUST USE OEM MOUNTING HARDWARE)
Page 620
MODEL: New Holland DC75-LT, WT, LGP, D85-LT, WT,
LGP, DC95X-LT, WT, LGP
Specs Track Pitch = 6.75", Link Ht. = 96mm, Bushing O.D.=
57 mm, Bolt Hole= 5/8"
Serial Nos:
DC75-LT, WT, LGP: (38LK) 12-Bottom Rollers, 2-Carrier Rollers
DC85-LT, WT, LGP: (39LK) 12-Bottom Rollers, 2-Carrier Rollers
DC95X-LT, WT, LGP: (40LK) 14-Bottom Rollers, 2-Carrier Rollers

V300212A1 Chain, 38L, Sealed, w/ Master Pin (Second Type)
V300212A1V Chain, 38L, Sealed, w/ Master Pin (Second Type) (Optional)
407014A1 Chain, 39L, Sealed, w/ Master Pin (Second Type)
407015A1 Chain, 40L, Sealed, w/ Master Pin (Second Type)
Your Track Groups
VR56517 Bushing
VCR3196 R49792 Pin
VCR2562 R50211 Seal Washer
VR50210 Spacer
V295202A1V Chain, 38L, SALT, w/ SML, 5/8" Bolt Hole (Second Type) (Optional)
407017A1 Chain, 39L, SALT, w/ SML, 5/8" Bolt Hole (Second Type)
V235239A1V Track Group, 38L, SALT, w/ SML, w/ 1 B 18" Shoe (Optional)
Your Track Groups
VR56024 Pin & Bushing Group 38LK Sealed and Lubricated
V295169A1 Master Link, L/H
V295170A1 Master Link, R/H
VR56515 Bushing
VCR3573 R51131 Pin
VCR3433 R50441 Plug w/Stopper
Track Hardware
V295325A1 295325A1 Master Bolt (4-Required 5/8X82.5mm)
Track Shoes
V295181A1 295181A1 Shoe, 1 B 18"
V295181A1V 295181A1 Shoe, 1 B 18" (Optional)
V295183A1 295183A1 Shoe, 1 B 28"
V328940A1 328940A1 Shoe, 1 B 16" w/ Mud Hole
V303471A1V 303471A1 Shoe, 1 B 18" w/ Mud Hole (Optional)
Page 621
Bottom Rollers
Carrier Rollers
Sprockets
412164A1 Sprocket 25 Teeth (10 Bolt Hole)
412061A1 Sprocket 25 Teeth (10 Bolt Hole) LGP & Wide Track Models
Idlers
419395A1 Idler Group (For DC85, DC95X Models)
Page 622
MODEL: New Holland DC100-LT, LGP
Specs Pitch = 6.75", Link Ht = 98mm, Bushing OD = 55.9
Serial Nos:
DC100-LT: (41LK) 14-Bottom Rollers, 2-Carrier Rollers
DC100-LGP: (45LK)

VCR4341/44 Chain, 45L, SALT, w/ SML (LGP) (Use VCR4341/44 & Link Components for 45 Link)
VCR4341/44V Chain, 45L, SALT, w/ SML (LGP) (Use VCR4341/44V & Link Components) (Optional)
Your Track Groups
VCR3573 Salt Pin (Reference 6Y9260)
VCR4355 Thrust Ring
Track Shoes
VCR4358/14 Shoe, 1,B 14"
VCR4358/16 Shoe, 1 B 16"
VCR4358/18 Shoe, 1 B 18"
VCR4358/20 Shoe, 1 B 20"
VCR3600/14 Shoe, 2 B 14"
VCR3600/16 Shoe, 2 B 16"
VCR3600/18 Shoe, 2 B 16"
Track Hardware
V9G3110 Track Shoe Bolt, 5/8"
" If Original Cat Chains Use 2- 9G8592 & 2-3T8601 per chain.
V3P2274 Master Link Bolt-Long (2 required) Sorefa Chain
V3T8601 Master Link Bolt-Short (2 required) Sorefa Chain
Page 623
V1A8537 Roller Mounting Bolt Series III
V5P8247 Washer
Carrier Rollers
V9W7216 Seal Group
Idlers
VFT3869 76606840 Idler
Sprockets
V3S8182 Sprocket Bolt (20 per side)
V6V4316 Washer (20 pieces per side)
Page 624
MODEL: New Holland DC150-LT, DC150X-LT, LGP
DC150B-LT, DC150BX-LT, LGP
Specs Pitch = 176mm, Link Ht = 106mm, Bushing OD = 57
mm, Bolt Diameter = 18mm
Serial Nos:
DC150-LT: (43LK) 14-Bottom Rollers, 4-Top Rollers
DC150X-LT, LGP: (48LK) 16-Bottom Rollers, 4-Top Rollers
DC150B-LT: (43LK) 14-Bottom Rollers, 4-Carrier Rollers
DC150BX-LT, LGP: (48LK) 16-Bottom Rollers, 4-Carrier Rollers

VFT2280/48 Chain, 48L, SALT, w/ SML (LGP)
Your Track Groups
VFT2309 Link, RH
VFT2310 Link, LH
VFT1967 Track Pin
Track Hardware
Track Shoes
VFT2284/500 76029769 Shoe, 1 B 20"
VFT2285/500 76029770 Shoe, Master, 1 B 20"
VFT2284/550 79039480 Shoe, 1 B 22"
VFT2285/550 79039481 Shoe, Master, 1 B 22"
VFT2284/800 76069524 Shoe, 1 B 32"
VFT2285/800 76069525 Shoe, Master, 1 B 32"
Bottom Rollers
VFT1910V 76004826 Roller Assembly S/F (Optional)
VFT1911V 76004825 Roller Assembly D/F (Optional)
Carrier Rollers
VFT949 Seal Group
Sprockets
VFT2958 79107146 Segment Group
Page 625
MODEL: New Holland DC195L
Serial Nos:
DC195L: (41LK)

Your Track Groups
VFT2105/41 Pin & Bushing Group 41L Sealed & Lubricated
VFT2119 79082230 Link R/H
VFT2120 79082231 Link L/H
VFT2068 79082234 Seal Assembly
VCR3191 79082221 Plug W/Stopper
Track Hardware
V79035814 Track Bolt, 20mm X 60mm
V79035816 Track Nut, 20mm
Bottom Rollers
Carrier Rollers
VFT2789 Carrier Rollers
Sprockets
Page 626
MODEL: New Holland DC180-LT, DC180X-LT, LGP,
DC180B-LT, DC180BX-LT, LGP
Serial Nos:
DC180-LT: (40LK) 14-Bottom Rollers, 4-Top Rollers
DC180X-LT, LGP: (45LK) 16-Bottom Rollers, 4-Top Rollers
DC180B-LT: (40LK) 14-Bottom Rollers, 4-Carrier Rollers
DC180BX-LT, LGP: (45LK) 16-Bottom Rollers, 4-Carrier Rollers

VCR4267/40V Chain, 40L, SALT, w/ SML, ProLine Rail (Optional)
VCR4267/45 Chain, 45L, SALT, w/ SML, Proline Rail (LGP)
VCR4267/45V Chain, 45L, SALT, w/ SML, Proline Rail (LGP) (Optional)
Your Track Groups
VCR3313/36 Pin and Bushing Group, 36 LK (Can Use When Replacing Pins and Bushings on CR4267)
VCR3313/39 Pin and Bushing Group, 41 LK (Can Use When Replacing Pins and Bushings on CR4267)
VCR4328 Master Link Complete,
Complete L.H.
L H (2 pieces)
VCR3319 Salt Pin
VCR3321 Ring
Track Hardware
Track Shoes
VCR2084/22 Shoe, 1 B 22"
VCR2084/24 Shoe, 1 B 24"
Bottom Rollers
V9W6647 Seal Group
VCR3636 Shaft
Page 627
V8S5349 Bushing
VCR1656 Key
Carrier Rollers
Sprockets
VFT4004 Segment Group
Page 628
MODEL: New Holland EC130LC, EC160LC
Serial Nos:
EC130LC: (45Lk) 16-Bottom Rollers, 2-Carrier Rollers

VCR1766/45 1922043 Chain, 45L, Unsealed, w/ Master Pin (Use VCR1766/46 and Shorten to 45 Link)
VCR1766/50 Chain, 50L, Unsealed, w/ Master Pin (Use VCR1766/51 and Shorten to 50 Link)
Your Track Groups
VCR1732 Link L.H.
VCR1733 Link R.H.
VCR3196 Track Pin
VCR241 Bushing
VCR4873 Master Pin
Track Hardware
Track Shoes
Bottom Rollers
VOK403 902236 Roller Assembly
Carrier Rollers
Sprockets
VOK484 204214 Sprockets
Idlers
VOK596 Front Idler With Brackets
Page 629
MODEL: New Holland EH130LC SR
Specs Pitch= 6.750", link height = 96.0 mm, Bushing OD =
Serial Nos:
EH130LC SR: (42Lk)

VKB100/42 Chain, 42L, Sealed & Greased, w/ Master Pin
VKB100/42V Chain, 42L, Sealed & Greased, w/ Master Pin (Optional)
VKB100/46 Track, 46L, Sealed & Greased, w/ Master Pin
VKB100/46V Track, 46L, Sealed & Greased, w/ Master Pin (Optional)
Your Track Groups
VKB100 Link Segment
VDY612000M02 Link, LH
VDY612000M01 Link, RH
VDY612000N24 Pin
VDY612300N00 Master Pin Group
VKB100MPGV Master Pin Group (V-Track "T" Headed) (Can Use VKM1798HD)
Seal Assembly
VDY612000N23 Bushing
VDY612000N27 Master Bushing
Track Hardware
V1M1408 Track Shoe Nut
Track Shoes
Bottom Rollers
N/A
N/A
Carrier Rollers
N/A
Sprockets
VR1610000Y01 Sprockets
Idlers
N/A
Page 630
MODEL: New Holland EH160, EH215, EC240LC
Serial Nos:
EH160: (45Lk)
EH215: (49Lk)
EC240LC: (51Lk)

Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
VCR5096 Spacer
VCR5350/45HDV Chain, 45L, Sealed & Greased w/ Master Pin (Optional)
Your Track Groups
VCR5096HD Spacer
Track Hardware
Track Shoes
Page 631
Bottom Rollers
V24100N6419F2 Roller Assembly, S/F-Excavator Style (44mm Collar Thickness)
V24100N6419V Roller Assembly, S/F-Excavator Style (44mm Collar Thickness) (Optional)
OK400 788479 Roller Assembly (Currently Not Available)
Carrier Rollers
V24100N6420 Carrier Roller
V24100N6420V Carrier Roller (Optional)
LQ64D01013F1 Carrier Roller (For EH215 Model) (Currently Not Available)
VID861 Carrier Roller (For EC240LC Model)
VID861V Carrier Roller (Optional) (For EC240LC Model)
Sprockets
VR16150A0Y01 Sprocket, 21-Tooth, 21-Bolt Hole
V2404N414 2404N262 Sprockets, 21-Tooth, 22-Bolt Hole (For EH215 Model)
V2404N262V VSI881V Sprockets (Optional) (For EH215 Model)
VCR5356 Sprocket rim 21-Teeth (For EC240LC Model)
Idlers
N/A
Page 632
MODEL: New Holland EC215LC
Serial Nos:
EC215LC: (50Lk)
Confirm Bolt Hole Size On Rails, May Be CR5350/.. Chains


Your Track Groups
V031265 Spacer
Track Hardware
Track Shoes
Bottom Rollers
OK400 788479 Roller Assembly (Currently Not Available)
Carrier Rollers
VID861 Carrier Roller
Sprockets
Page 633
Idlers
N/A
Page 634
MODEL: Prentice 620 Feller Buncher
Serial Nos:
620: (45 Lk)

Your Track Groups
VCR5497 Spacer
Track
T kH Hardware
d
V6Y0846 Track Shoe Bolt, 20mm
Track Shoes
Bottom Rollers
VCR5525 30004492 Roller Assembly, S/F (16-Required)
V7X2565 Bolt
V8T4123 Washer
Sprockets
VCR5604 30005743 Sprocket 21-Tooth, 18-Bolt Hole
Page 635
MODEL: Prentice 630, 630A Feller Buncher
Serial Nos:
630: (47 Lk)
630A: (47Lk)
Unsealed Chains **121.5 mm Link Height**

Your Track Groups
VCR3172 Link, R/H
VCR3173 Link, L/H
VCR1783 Track Pin
VCR1789 Master Pin
V082532 Spacer
Sealed Chains **121.5 mm Link Height**
Your Track Groups
VCR5055 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
VCR31764724SB Track Group, 47L, Sealed, w/ Master Pin, w/ 1 B 24" Shoe CC/MH
VCR31764724DB Track Group, 47L, Sealed, w/ Master Pin, w/ 2 B 24" Shoe MH
Your Track Groups
VCR1783 Sealed Pin
Page 636
VCR1630 Seal Washer
VCR1632 Spacer
Track Hardware
Track Shoes
Bottom Rollers
Carrier Rollers
Sprockets
VR14060C0Y01 Sprocket (Prentice 630 Model)
V10031208 Sprocket (Prentice 630A Model)
Idlers
VKO76
VKO 6 Idler
Idl G Group Wi
With
hBBrackets
k
Page 637
MODEL: Prentice 730 Feller Buncher
Serial Nos:
730: (45 Lk)

VKM1402/45 Chain, 45L, Sealed, w/ Master Pin (Use VKM1402/49 & Shorten to 45 Link)
Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
V175.32.11210 175.32.11210 Track Shoe Bolt, 24MM X 76MM X 1.5mm thread pitch
V178.32.11220 178.32.11220 Track Shoe Nut, 24MM Square
Bottom Rollers
VLH90 Roller Assembly (Check Hole Diameter - Some can be 24mm - VLH90 is for 22mm Bolt)
Sprockets
V10101033 Sprockets
Idlers
Page 638
MODEL: Samsung SE130LC, SE130LC-2, SE130LCM,
SE130LCM-2, SE130LCS, SE130LC-3, LCM-3
Serial Nos: SE130LC: (46Lk) 14-Bottom Rollers, 2-Carrier Rollers
SE130LC-2: (46Lk) 14-Bottom Rollers, 2-Carrier Rollers
SE130LCM: (48Lk) 14-Bottom Rollers, 4-Carrier Rollers
SE130LCM-2: (48Lk) 14-Bottom Rollers, 4-Carrier Rollers
SE130LCS: (46Lk) 14-Bottom Rollers, 2-Carrier Rollers
SE130LC-3: (42Lk)
SE130LCM-3: (42Lk)

VCR4854/46F 1082-02541 Chain, 46L, Unsealed, w/ Master Pin
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Your Track Groups
0449DOM, D7610, A171J, and 1014776*
VT55263HD Track Pin
Page 639
VT55263HD Track Pin
Track Hardware
Track Shoes
Bottom Rollers
VPC377 1030-03970 Bottom Rollers
VPC377V Bottom Rollers (Optional)
Carrier Rollers
VCR2880 1081-01670 Carrier Rollers
Idlers
V1081-04050V 1081-04050 Idler Group (For SE130, SE130LC, SE130LC-2, 3)
1081-04130 Idler Group (For SE130LCM-2)
V1181-00030V 1181-00030 Idler Group (For SE130LCM-3)
Sprockets
V1081-01021V 1081-03860 Sprockets 21T - 21 B/H (For SE130, SE130LC, SE130LC-2 Models)
1081-04170 Sprockets (For SE130LCM-2 Models)
Page 640
MODEL: Samsung SE200, SE200LC, SE210, 210LC
Serial Nos: SE200: (50LK) 14-Bottom Rollers, 4-Carrier Rollers
SE200LC: (54LK) 16-Bottom Rollers, 4-Carrier Rollers
SE210: (50Lk) 14-Bottom Rollers, 4-Carrier Rollers
SE210LC: (54Lk) 18-Bottom Rollers

VCR2006/50 1030-60020 Chain, 50L, Unsealed, w/ Master Pin
VCR2006/50V 1030-60020 Chain, 50L, Unsealed, w/ Master Pin (Optional)
VCR2006/54 1082-00100 Chain, 54L, Unsealed, w/ Master Pin
VCR2006/54V 1082-00100 Chain, 54L, Unsealed, w/ Master Pin (Optional)
Your Track Groups

VCR255 Sealed Pin
VCR1605 Master Pin
VPC57 Spacer
C 56
VCR256TH U sea ed Bushing
Unsealed us g
Track Hardware
Track Shoes
Bottom Rollers
VPC431 Bottom Rollers
VPC431V Bottom Rollers (Optional)
Carrier Rollers
VCR2881 Carrier Rollers(For SE200, SE200LC Models Only)
VCR2881V Carrier Rollers(For SE200, SE200LC Models Only) (Optional)
Idlers
V1081-03790V 1081-03790 Idler Group with Brackets (For SE210 Only)
1081-00980 Idler Group with Brackets (For SE210LC Only)
Sprockets
VRN8 Sprocket Rim 23-Tooth (For SE210LC Model)
1030-61890 Sprocket 23-Tooth, 16-Bolt Hole
1030-60001 Sprocket 23-Tooth, 22-Bolt Hole
Page 641
MODEL: Samsung SE210-2, SE210LC-2, SE210LC-3,
SE235LC-3, SE235NLC-3, SE240LC-3,
SE240NLC-3
Specs Track Pitch = 7.484, Link Ht.= 105mm, Bushing O.D.=
60mm, Bolt Hole Dia.= 20mm
Serial Nos: SE210-2: (45Lk) 14-Bottom Rollers, 4-Carrier Rollers
SE210LC-3: (49Lk)
SE235LC-3: (51Lk)
SE235NLC-3: (51Lk)
SE240LC-3: (51Lk)
SE240NLC-3: (51Lk)

Your Track Groups
V031265 Spacer
New Style Sealed & Greased Track Chains & Track Groups

Page 642
Your Track Groups
Track Hardware
Track Shoes
VID1705/600 Track
T k Shoe,
Sh 1 B 600mm,
600 w// CC/M
CC/Mud Hole
dH l
Bottom Rollers
VKL18 1030-03680 Bottom Rollers
VKL18V Bottom Rollers (Optional)
Carrier Rollers
V1030-50030 1030-50030 Carrier Rollers
V1030-50030V 1030-50030 Carrier Rollers (Optional)
N/A 1181-00020 Carrier Roller (For SE210LC-3, SE235LC-3, NLC-3, SE240LC-, NLC-3 Models)
Idlers
V1081-03790V 1081-03790 Idler Group with Brackets
Page 643
V1181-00030 1181-00030 Idler Group ( For SE210LC-3, SE235LC-3, NLC-3, SE240LC-, NLC-3 Models)
V1181-00030V 1181-00030 Idler Group ( For SE210LC-3, SE235LC-3, NLC-3, SE240LC-, NLC-3 Models) (Optional)
Sprockets
V1181-03710V 1030-03710 Sprocket 21-Tooth, 22-Bolt Hole (For SE210LC-2, SE210LC-3 Models)
N/A 1181-00380 Sprocket 21-Tooth, 18-Bolt Hole (For SE235 & SE240 Models Only)
Page 644
MODEL: Samsung SE280-2, SE280LC-2, NLC-2
Serial Nos: SE280-2: (47Lk) 16-Bottom Rollers, 4-Carrier Rollers
SE280NLC-2: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers

Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM959/47HDV 9114840 Chain, 47L, Sealed and Greased
Your Track Groups
VKM1033HD Link, R/H
VKM1034HD Link, L/H
VKM1365HD Track Pin
VCR1632HD Spacer
Track Hardware
Track Shoes
Page 645
Bottom Rollers
V207.30.16102 1081-03871 Bottom Rollers with 20mm Bolt Hole
Carrier Rollers
1081-01030 Carrier Rollers
Idlers
V5209270 1081-03910 Idler Group
V1081-03910V Idler Group (Optional)
Sprockets
V1081-03900V 1081-03900 Sprocket 23-Tooth, 24-Bolt Hole
VSI59 Sprocket Rim
Page 646
MODEL: Samsung SE350, SE350LC-2, SE350LC-5
Serial Nos: SE350:
Note: Check Bolt Diameter to Determine Track Chain Needed.

Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
VHT227/48HD Chain, 48L, Sealed and Greased
Your Track Groups
VCR1540HD Spacer
Page 647
Bottom Rollers
VLH90 1081-01800 Bottom Rollers
VLH90V Bottom Rollers (Optional)
Carrier Rollers
VCR2876 1081-01820 Carrier Rollers (For SE350LC-2, 5 Models)
VCR2876V 1081-01820 Carrier Rollers (For SE350LC-2, 5 Models) (Optional)
Idlers
V1081-03910V 1081-00510 Idler With Brackets (For SE350LC-2, 5 Models)
Sprockets
V1081-01850V 1081-01850 Sprocket, 21-Tooth, 24-Bolt Hole
Page 648
MODEL: Samsung SE450LC-2
Serial Nos: SE450LC-2: (52Lk)

Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
VHT227/52HD 1082-01990 Chain, 52L, Sealed & Greased, w/ Master Pin
Your Track Groups
VAT201777 Track Link
Link, R
R.H..
H
VCR1540HD Spacer
Page 649
Bottom Rollers
VLH90 1081-01800 Bottom Rollers
VLH90V Bottom Rollers (Optional)
Carrier Rollers
VCR2876V 1081-01820 Carrier Rollers (Optional)
Idlers
V1081-02222V 1081-02222 Idler Group
Sprockets
Page 650
MODEL: Tamrock DH400, DHA400, DHAT
Specs Track Pitch = 140mm, Link Ht.= 70mm, Bushing Dia.=
37.1mm, Bolt Diameter =12mm
Serial Nos:
DH400: (40Lk) 12-Bottom Rollers, 2-Carrier Rollers
DHA400: (44Lk) 12-Bottom Rollers
DHAT: (40Lk) 12-Bottom Rollers, 2-Carrier Rollers

Your Track Groups
VKM680HD Link R/H
VKM681HD Link L/H
VFT684 Track Pin
VFT1351/40HD Chain, 40L, Sealed & Greased, w/ Master Pin
Your Track Groups
VFT684HD Track Pin
Track Shoes
Track Hardware
Carrier Rollers
VVA380 Carrier Rollers (For DH400, DHAT Models)
VVA380V Carrier Rollers (For DH400, DHAT Models) (Optional)
Bottom Rollers
VVA380 Roller Assembly S/F
VVA380V Roller Assembly S/F (Optional)
VVA1267 Roller Assembly S/F (For DHA400 Model)
Page 651
MODEL: Tamrock DHA1000, DHA500, DHA600, DHA800,
DHH
Serial Nos:
DHA1000: (43Lk) 2-Carrier Rollers
DHA500: (40Lk) 14-Bottom Rollers, 2- Carrier Rollers
DHA600: (40Lk) 14-Bottom Rollers, 2-Carrier Rollers
DHA800: (43Lk) 2-Carrier Rollers
DHH: (40Lk) 14-Bottom Rollers, 2-Carrier Rollers

Your Track Groups
VFT785 79005967 Track Bushing
VFT1348 Master Pin
VFT471 5011869 Track Pin
VFT778 Spacer
Track Hardware
V7K2017 Track
T k Shoe
Sh Nut
N t 9/16"
Track Shoes
Carrier Rollers
VVA542 Carrier Rollers (For DHA500, DHA600, DHH Models)
Bottom Rollers
Page 652
MODEL: Tigercat 240T, 245T, 853, PP, 845,H, 860, D,
Feller Buncher
Serial Nos: Note: Check Track Shoe Style, Size and Number of Links
Before Ordering Track Groups and/or Track Shoes
Sealed Track Groups - **128 mm Link Height**

Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed & Greased Track Chains - **121.5 mm Link Height**
VCR5059/45HD 90595/96317 Chain, 45L, Sealed & Greased, w/ Master Pin
Your Track Groups
Page 653
VCR1632HD Spacer
Track Shoes
Track Hardware
V7H3598 Track Bolt 3/4"X2.3/8"
Carrier Rollers
VLH27 7055A Roller Assembly, S/F (4-Required)
VLH27V 7055A Roller Assembly, S/F (4-Required) (Optional)
Bottom Rollers
VCR5365V CW032 Roller Assembly S/F 7/8 Bolt Hole (12-Required)
VCR5366V CW033 Roller Assembly D/F 7/8 Bolt Hole (6-Required)
Idlers
VKO76 Idler Group With Brackets
Sprockets
** Measure Sprocket Opening to Determine Sprocket **
VPC37 3748B Sprocket Rim (Weld On) (Will work with either KO0142 or VA1042)
VKO142V 3647B Sprocket, 23-Tooth, 24-Bolt Hole, 18" Center Opening
VVA1042 Sprocket, 23-Tooth, 24-Bolt Hole, 16" Center Opening
Page 654
MODEL: Timbco T415, T415D
Serial Nos: T415: (45Lk)
T415D (45Lk)

Your Track Groups
VCR5096HD Spacer
Track Shoes
VZ1621100N700 Track Shoe
Shoe, w/ 1 B 700mm
700mm, w/ CC/Mud Hole
Track Hardware
V6Y0846 Track Bolt 20mm X 63mm ** Note: For ESS and Double bar shoes **
Bottom Rollers
VCR5726 6I9396 Roller Assembly
VCR5726V 6I9396 Roller Assembly (Optional)
Idlers
VCR5786V 115-6337 Idler with Brackets
Sprockets
VCR5602 8E9805 Sprocket Rim
VCR5602V Sprocket Rim (Optional)
Page 655
VCR5606V Sprocket (Timbco 415D Model)
Page 656
MODEL: Timbco T420
58.70mm , Bolt Diameter =3/4"
Serial Nos:

Your Track Groups
VCR4795 Sealed Pin
VCR2166 Seal Washer
Track Shoes
VCR5012/22 Shoe, 3 B 22"
VCR5012/26 Shoe, 3 B 26"
VCR5012/30 15922 Shoe, 3 B 30"
VCR5012/34 Shoe, 3 B 34"
Track Hardware
V1S1859 15923 Track Shoe Bolt, 3/4"
V1S1860 15924 Track Shoe Nut, 3/4"
VCR5110 16416 Roller Assembly, S/F-Excavator Style
VCR5110V 16416 Roller Assembly, S/F-Excavator Style (Optional)
VIN3403 Seal Group
V5P8248 Washer (3/4")
Carrier Rollers
V9W6647 Seal Group
Idlers
VCR3978 Idler w/Shaft
V9W7216 Seal Group
Sprocket
V9C2646V Sprocket, 21-Tooth, 16-Bolt Hole
V1D4608 Bolt 3/4" X 2.3/4" (16-Required)
V5P8248 Washer 3/4" (16-Required)
Page 657
MODEL: Timbco T425
Serial Nos: T425: (45Lk) 18-Bottom Rollers, 4-Carrier Rollers
Advise Customer of Option to Convert Track Groups to D6C for Severe

Duty Applications
Note: Check Final Drive Clearance if Converting Tracks to the CR3176/..
Dozer Style Track Chain. Link Height much larger at 128MM.

V6Z7825V Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 1 B 600mm Shoe CC/MH (Option)
VCR5488/45700 8E6047 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 700mm Shoe
VCR5488/45800 6Y2131 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 800mm Shoe
VCR548845800V 6Y2131 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 3 B 800mm Shoe (Optional)
Your Track Groups
VCR5497 Spacer
Track Shoes
Track Hardware
V6Y0846 17185 Track Shoe Bolt, 20mm X 63mm
Page 658
VCR3176/45V Chain, 47L, Sealed, w/ Master Pin Bush OD (66.67mm) (Optional)
Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Track Hardware
Track Shoes
Bottom Rollers
163-4148 Roller Assembly, D/F NOT AVAILABLE - CAT ONLY
V7X2565 Bolt
V8T4123 Washer
Carrier Rollers
Note: Some machines have bottom rollers as a carrier roller. Please confirm before ordering
VCR5595 17540 Carrier Roller (4-Required)

VCR5525V Roller Assembly, S/F (4-Required) (Optional)
Idlers
VCR5884 17872 Idler Group
VCR5884V Idler Group (Optional)
Sprockets
VCR5604 21378 Sprocket 21-Tooth, 18-Bolt Hole
Page 659
MODEL: Timbco T430, T435
Serial Nos: T430: (47Lk)

VCR3176/47V Chain, 47L, Sealed, w/ Master Pin Bush OD (66.67mm) (Optional)
Your Track Groups
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed Chains and Track Groups **121.5 mm Link Height

Your Track Groups
VCR5055 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed & Greased Track Chains - 121.5 mm Link Height
Your Track Groups
Page 660
VCR1632HD Spacer
Track Hardware
Track Shoes
Bottom Rollers
VCR5111 16417 Roller Assembly, S/F-Excavator Style
Carrier Rollers
Sprockets
VCR1844 Sprocket Rim (Can be used for 235 Exc 32K1-1300 & 64R 1 up)(25 Teeth)
VPC37 Weld on sprocket Rim 23-Tooth
Page 661
MODEL: Timbco T440, T445
Serial Nos:

V6Y2755HD Chain, 45L, Sealed & Greased, w/ Master Pin (USE V6Y2754HD and Shorten to 45 Link)
V6Y2755HDV Chain, 45L, Sealed & Greased, w/ Master Pin (USE V6Y2754HDV and Shorten to 45 Link)
V6I9891 22656 Track Group, 45L, Sealed & Greased, w/ Master Pin, w/ 1 B 600mm Shoe ESS
Your Track Groups
V6Y2749HD Spacer
V6Y2749HD Spacer
Track Shoes
Track Hardware
Page 662
V1434891 17863 Track Shoe Bolt, 22mm X 73mm
Bottom Rollers
VCR5897 Roller Assembly, S/F (24mm Bolt Hole)
179-1491 Roller Assembly, D/F NOT AVAILABLE - CAT ONLY
V7X2454 Bolt 24mm
V8T4167 Washer
Idlers
VCR6087 17873 Idler With Brackets
VCR6087V Idler With Brackets (Optional)
Sprockets
V6Y5685 21443 Sprocket Rim
V6Y5685V Sprocket Rim (Optional)
Page 663
MODEL: Timbco T450D, T455
Serial Nos: Note: Check Track Shoe Style and Size Before Ordering
Track Groups and Track Shoes
T450D: (45LK)
T455: (45LK)

Your Track Groups
VCR4247 Link, R.H.
VCR4248 Link, L.H..
VCR4727 Sealed Pin
VCR1541 Seal Washer
VCR1540 Spacer
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Shoes
Page 664
Bottom Rollers
V9W6647 Seal Group
VCR2609 Shaft
V8S2539 Bushing
VCR2612 Key
V2H3928 Gasket
V9B2289 Pin
V2P0347 Plug
V1S8947 Plug
Carrier Rollers
Idlers
VCR6087 Idler Group With Brackets (For T455 Model)
VCR6087V Idler Group With Brackets (Optional) (For T455 Model)
Sprockets
V6Y5685 Sprocket 23-Tooth, 16-Bolt Hole
V6Y5685V Sprocket 23-Tooth, 16-Bolt Hole (Optional)
Page 665
MODEL: Timberjack TJ608 Feller Buncher
Serial Nos: Note: For track groups use 608B

VKM1170/45F Chain, 45LK, Unsealed w/Master Pin
Your Track Groups
VKM1147HD Master Pin (1
(1.5
5" X 8
8.75
75"))
V031265 Spacer
Your Track Groups
VKM1149/47HD Pin and Bushing Group, 47LK
VKM70HD Seal Assembly Polyurethane
VKM71HD Spacer
VAT174863 Snap Ring
Track Hardware
Page 666
Track Shoes
Bottom Rollers
VCR1292 700649500 Roller Assembly, S/F - 5/8 Bolt Hole (4 Required)
VCR1292V 700649500 Roller Assembly, S/F - 5/8 Bolt Hole (4 Required) (Optional)
VCR1293 700649600 Roller Assembly, D/F - 5/8 Bolt Hole (12 Required)
VCR1293V 700649600 Roller Assembly, D/F - 5/8 Bolt Hole (12 Required) (Optional)
Idlers
VDE14 F121439 Idler Group. With Brackets Only
Sprockets
VKO115 700035400 Sprocket
Page 667
MODEL: Timberjack TJ653 Shovel Loader
Note: Check Track Shoe Style and Size Before Ordering
Serial Nos: 653:(49LK) 18-B/R, 4-T/C

VKM782/49F 790098200 Chain, 49L, Unsealed, w/ Master Pin
VKM782/49FV 790098200 Chain, 49L, Unsealed, w/ Master Pin (Optional)
* New Style Chain Casting Number DY569, Verify Casting Number for Parts *
Your Track Groups
V031265 Spacer
Your Track Groups
Page 668
Track Shoes
Track Hardware
V79035814 Track
T k Bolt,
B lt 20mm
20 60mm (NON
X 60 (NON-OEM
OEM Track
T k Shoe
Sh - Base
B Plate
Pl t Thickness
Thi k = 9-10mm)
9 10 )
Bottom Rollers
VKM1428 Bottom Roller (20mm Roller Bolt)
VKM1428V Bottom Roller (Optional) (20mm Roller Bolt)
Carrier Rollers
VKM1640 Carrier Roller
VKM1640V Carrier Roller (Optional)
Idlers
VKM1642 Idler Group
VKM1642V Idler Group (Optional)
Sprockets
N/A 01010-51670 Sprocket (Serial # 1-972004)
VKM1501 20Y.32.11581 Sprocket (Serial # 972005-up)
VKM1501V 20Y.32.11581 Sprocket (Serial # 972005-up) (Optional)
Page 669
MODEL: Timberjack TJ608B Feller Buncher
Note: Check Track Shoe Style and Size Before Ordering
Serial Nos: 608B:(45LK)

* New Style Chain Casting Number DY569, Verify Casting Number for Parts *
Your Track Groups
V031265 Spacer
Your Track Groups
Page 670
Track Shoes
Track Hardware
V79035814 Track
T k Bolt,
B lt 20mm
20 60mm (NON
X 60 (NON-OEM
OEM Track
T k Shoe
Sh - Base
B Plate
Pl t Thickness
Thi k = 9-10mm)
9 10 )
Bottom Rollers
VVA1676V F121512 Roller Assembly, S/F 3/4 Bolt Hole (4 Required)
VVA1677V F121513 Roller Assembly, D/F 3/4 Bolt Hole (12 Required)
Carrier Rollers
VCR5110 F121568 Roller Assembly, S/F-Excavator Style (4-Required)
VCR5110V F121568 Roller Assembly, S/F-Excavator Style (4-Required) (Optional)
VIN3403 Seal Group
V5P8248 Mounting Washer 3/4"
Idlers
VDE14 F121439 Idler Group. With Brackets Only
Sprockets
VKO115 700035400 Sprocket
Page 671
MODEL: Timberjack TJ608L, S, TJ618, TJ735, TJ850,
TJ2618 Feller Buncher
Serial Nos: Note: Check Track Shoe Style, Size and Number of Links
Before Ordering Track Groups and/or Track Shoes
Sealed Track Groups - **128mm Link Height**

VCR31764524SB Track Group, 45L, Sealed, w/Master Pin, w 1 B 24" Shoe CC/MH
VCR31764528SB Track Group, 45L, Sealed, w/Master Pin, w 1 B 28" Shoe CC/MH
VCR31764524DB Track Group, 45L, Sealed, w/Master Pin, w 2 B 24" Shoe MH
VCR3176/45 Chain, 45L, Sealed, w/ Master Pin - Bush OD (66.67mm)
VCR3176/45V Chain, 45L, Sealed, w/ Master Pin - Bush OD (66.67mm) (Optional)
Your Track Groups
VCR3172 Track Link
Link, R
R.H.
H
VCR1783 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Unsealed Chains **121.5 mm Link Height**
Your Track Groups
VCR3172 Link, R/H
VCR3173 Link, L/H
VCR1783 Track Pin
VCR1789 Master Pin
V082532 Spacer
Sealed Chains **121.5 mm Link Height**
Your Track Groups
Page 672
VCR5055 Sealed Pin
VCR1630 Seal Washer
VCR1632 Spacer
Sealed & Greased Track Chains - **121.5mm Link Height**
VCR5059/45HD 790104700 Track Chain, 45L, Sealed & Greased, w/ Master Pin
Your Track Groups
p
Components y Sealed & Greased Chains
For Old Style
VCR1632HD Spacer
Track Shoes
Track Hardware
V7H3598 790105700 Track Bolt 3/4"X2.3/8"
V1S1860 842635900 Track Nut 3/4"
Bottom Rollers
VCR5365V 701506000 Roller Assembly S/F 7/8 Bolt Hole (4-Required)
Page 673
VCR5366V 701506100 Roller Assembly D/F 7/8 Bolt Hole (12-Required)
Carrier Rollers
VLH27 842590100 Roller Assembly, S/F (4-Required)
VLH27V Roller Assembly, S/F (4-Required) (Optional)
Idlers
VKO76 F121365 Idler Group With Brackets
Sprockets
VKO111V Sprocket (Optional)
Page 674
MODEL: Timberjack 2518 Feller Buncher
Serial Nos: 2518:(42LK)

Your Track Groups
VCR1770 Link, R/H
VCR1771 Link, L/H
VCR1631 Master Pin
VD01070E0N10 Spacer
Track Shoes
VCR2086/24CM Track Shoe 1-Bar 24" With Clipped Corners and Mud Hole
VCR2086/36CM Track Shoe 1-Bar 36" With Clipped Corners and Mud Hole
Track Hardware
V1S1859 Track Bolt 3/4" X 2.13/64
Bottom Rollers
VLH27 Roller Assembly S/F Excavator Style (12-Required)
VLH27V Roller Assembly S/F Excavator Style (Optional)
Carrier Rollers
VCR2876 Carrier Rollers (4-Required)
Idlers
V5209270 Idler Group
Sprockets
VLH198 Sprocket Rim
Page 675
MODEL: Timberjack TJ628, TJ900, TJ950 Feller Buncher

Serial Nos: Note: Check Track Shoe Style and Size Before Ordering
TJ900: (45LK) 4-S/F Rollers, 14-D/F Rollers, 4-Carrier Rollers

TJ950: (45LK)
TJ628: (45LK)
Sealed "Dozer Style" Chains and Track Groups

VMT14/45 Chain, 45L, Sealed, Dozer Style, w/ Master Pin
Your Track Groups
VKM1398 Sealed Pin
VKM804 Spacer
S
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Shoes
Page 676
Bottom Rollers
V9W6647 Seal Group
V8S2539 Bushing
VCR2612 Key
V2H3928 Gasket
V9B2289 Pin
V2P0347 Plug
V1S8947 Plug
Carrier Rollers
VLH27 842590100 Roller Assembly, S/F (4-Required)
VLH27V 842590100 Roller Assembly, S/F (4-Required) (Optional)
VCR2876 Carrier Roller (For 628 Model)
VCR2876V Carrier Roller (For 628 Model) (Optional)
Idlers
VKO76 F121365 Idler Group With Brackets
Sprockets
VKO114V 700027690 Sprocket (Optional)
Page 677
MODEL: TAKEUCHI TL120
Page 678
MODEL: TAKEUCHI TL130
V53251SL Rubber Track, TL130
V53252V Rubber Track, TL130 (Optional)
V08801-30000V V0880130000 TL130 CENTER ROLLER (Also fits TL26 Model)
V08801-35600V V0880135600 TL130 REAR IDLER
V08801-40000V V0880140000 TL130 FRONT IDLER
V08801-66210V V0880166210 TL130 SPROCKET
Page 679
MODEL: TAKEUCHI TL140/TL150
V54648SWL Rubber Track, TL140
V54650SWL Rubber Track, TL150
V08811-30500V V0881130500 TL140/TL150 CENTER ROLLER (10 Roller Required)
V08811-31300V V0881131300 TL140/TL150 REAR IDLER
V08811-40300V V0881140300 TL140/TL150 FRONT IDLER
V08821-60010V V0882160010 TL140 SPROCKET (Confirm Sprocket I.D. of 200mm)
V08811-60110V V0881160110 TL150 SPROCKET (Confirm Sprocket I.D. of 242mm)
Page 680
MODEL: TAKEUCHI TB125
Page 681
V63580V Rubber Track (350mm Width)
V63184V Rubber Track (300mm Width)
Page 682
Page 683
MODEL: Volvo H3, H3B
Serial Nos: H3: (38LK) 10-Bottom Rollers
H3B: (38LK) 12-Bottom Rollers

VAK13/38 210925 Chain, 38L, Unsealed, w/ Master Pin

Your Track Groups
VAK13 Link Segment
VAK16 Link, R/H
VAK17 Link, L/H
VCR2678 Track Pin
VCR3012 Master Pin
VCR3550 Spacer
VAK13/38HD Chain, 38L, Sealed & Greased, w/ Master Pin
VAK13/46HD Chain, 46L, Sealed & Greased, w/ Master Pin
Your Track Groups
VAK13HD Link Segment
V084194 Link, R/H
V084193 Link, L/H
V084105 Track Pin
V084107 Master Pin
V084108 Spacer
Track Hardware
V4K7038 Track Bolt 9/16" X 1.21/32
Track Shoes
VAK14/500 Shoe, 3 B 20"
V78406 Shoe, 12" Poly Bonded
Bottom Rollers
VVA1165 14210924 Roller Assembly S/F
Idlers
V14210920 14210920 Idler Group
Sprockets
VQ1402000Y01 Sprocket Rim
Page 684
MODEL: Volvo EC130C, EC140, EC140LC, EC140B,
EC140BLC, EC140BLCM, EC150C
Specs Track Pitch = 171.1mm, Link Ht.= 96mm, Bushing
Serial Nos: EC130C: (47Lk) 16-Bottom Rollers, 4-Carrier Rollers
EC140: (42Lk) 12-Bottom Rollers, 4-Carrier Rollers
EC140B: (41Lk)
EC140BLC: (46Lk)
EC140B LCM: (42Lk)
EC150C: (47Lk)
EC200LC: (52Lk) S/N 2760 & Up 18-Bottom Rollers, 4-Carrier Rollers

VCR4858/47F 14340707 Chain, 47L, Unsealed, w/ Master Pin
Your Track Groups
VCR3196 Sealed Pin
VCR3194 Master Pin
VCR3197F Spacer
Page 685
Your Track Groups
VCR4874/51HD Pin & Bushing Group, 51 LK Sealed & Greased
VCR4872HD Track Pin
VCR3197F Spacer
VCR3195HD Bushing
Track Hardware
Track Shoes
VCR3600/26 Track
T k Shoe,
Sh w// 2 B 660mm
660 w/o
/ MMud
dHHole
l
Bottom Rollers
VV2442343 14214918 Roller Group (For EC130C & EC150C Models Only)
VPC377 1081-03970 Roller Group (For EC140, EC140LC, EC140BLC, EC200LC Models)
VPC377V Roller Group (For EC140, EC140LC, EC140BLC, EC200LC Models) (Optional)
VKL18 14504091 Roller Group (For EC140BLCM)
VKL18V Roller Group (For EC140BLCM) (Optional)
Carrier Rollers
14252446-1 Carrier Roller (For EC130C, EC150C)
1181-01100 Carrier Roller (For EC140, EC140LC, EC140B, EC140BLC)
1181-00020 Carrier Roller (For EC140B LCM)
14215476 Carrier Roller (For EC200LC)
Idlers
1081-04000 Idler Group (For EC140B, EC140B LC Models Only)
V1181-00030V 1181-00030 Idler Group (For EC140B LCM Model Only)
Sprockets
V5006114 14214926 Sprocket (For EC130C, EC150C Models)
Sprocket (For EC140, EC140LC, EC140B, EC140BLC Models)
Sprocket (For EC140B LCM Model) 22-Bolt Hole
14340313 Sprocket (For EC200LC S/N: 2760 - Up Model)
V14215468 14215468 Sprocket (For EC200LC S/N: 02101 - 02442)
Page 686
MODEL: Volvo EC160CHN, EC160CHW, EC160LC
O.D. = 50.6mm & 5/8" Bolt Diameter
Serial Nos:
EC160CHN: S/N 1001-1113 (49Lk)
EC160LC: (50Lk)

VCR4854/49V 11705618 Chain, 49L, Sealed, w/ Master Pin (Optional)
Your Track Groups
VCR3196 Track Pin
VCR4873 Master Pin
VCR1617 Seal Washer
VCR1619 Spacer
VCR4854/49F Chain, 49L Unsealed, w/ Master Pin
VCR4854/50F Chain, 50L Unsealed, w/ Master Pin
Your Track Groups
VT55263HD Track Pin
VCR3197HD Spacer
Your Track Groups
VT55263HD Track Pin
Page 687
VT55263HD Track Pin
Track Hardware
V1M1408 14044062 Track Shoe Nut, 5/8"
Track Shoes
Bottom Rollers
VHT49 14370170 Roller Assembly, S/F
VHT49V Roller Assembly, S/F (Optional)
Carrier Rollers
Sprockets
Idlers
Page 688
MODEL: Volvo EC180B, EC210B, EC210B LC, EC230B,
EC240B, EC240B LC
Specs Track Pitch = 7.484", Bushing Diameter= 60mm, Bolt
Hole= 20mm
Serial Nos:
EC180B: S/N: 10001-10011 (46Lk)
EC210B: (46Lk)
EC210B LC: (49Lk)
EC230B: (50Lk)
EC240B: (49Lk) 18-Bottom Rollers, 4-Carrier Rollers
EC240B LC: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers

VKM782/51F 1182-00131
1182 00131 Chain, 51L, U
Ch i 51L Unsealed,
l d w// M
Master
t PiPin
Your Track Groups
V031265 Spacer
New Style Sealed & Greased Track Chains & Track Groups
VKM782/46HD Chain, 46L, Sealed & Greased, w /Master Pin

VKM782/46HDV Chain, 46L, Sealed & Greased, w /Master Pin (Optional)
Page 689
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VKL18 14504091 Bottom Rollers
VKL18V Bottom Rollers (Optional)
Carrier Rollers
14520149 Carrier Rollers (For EC180B, EC210B, EC210B LC, EC240B, EC240B LC Models)
VID861 14260871 Carrier Roller (For EC230B Model Only)
Page 690
VID861V Carrier Roller (Optional) (For EC230B Model)
Idlers
V1181-00030V 1181-00030 Idler Group (For EC180B, EC210 & EC240 Models)
Sprockets
V1181-03710V Sprocket (For EC180B, EC210B, EC210B LC Model) 22-Bolt Hole
VAK21 14260868 Sprocket (For EC230B Model Only)
Sprocket (EC240B, EC240B LC Models) 18-Bolt Hole
Page 691
MODEL: Volvo EC230 (First & Second Type)
Serial Nos:
EC230: (50Lk)

Your Track Groups
V031265 Spacer
Track Hardware
Track Shoes
Bottom Rollers
VKL18 1181-00010 Roller Assembly
VKL18V Roller Assembly, S/F (Optional)
Carrier Rollers
VID861 Carrier Roller (For EC230 Second Type Model)
VID861V Carrier Roller (Optional) (For EC230 Second Type)
Sprockets
Idlers
V14016657 Idler Group With Brackets (For EC230 First Type)
VID892 Idler Group (For EC230 Second Type)
VID892V Idler Group (For EC230 Second Type) (Optional)
Page 692
MODEL: Volvo EC280 CHWL
Serial Nos:
EC280 CHWL: (51Lk)

11703566 Chain 51L, Unsealed, w/ Master Pin (OK520/51)
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VKL18 1181-00010 Roller Assembly
VKL18V Roller Assembly (Optional)
Carrier Rollers
VID861 14260871-0 Carrier Rollers
Sprockets
V14268385 Sprockets
Idlers
V11703579 Front Idler With Brackets
Page 693
MODEL: Volvo EC290B, EC290BLC, EC290B NLC
Serial Nos:
EC290B: (50Lk)
EC290BLC: (50Lk)
EC290B NLC: (50Lk)

Your Track Groups
VKM1033 Link, R/H
VKM1034 Link, L/H
VKM169 Track Pin
VKM1366 Master Pin
VKM959/50 14502158 Use KM959/50F or KM959/50HD
Your Track Groups
Your Track Groups
VKM1365HD Track Pin
Page 694
VCR1632HD Spacer
VTH111227 Snap Ring
VKM170HD Bushing
Track Hardware
Track Shoes
Bottom Rollers
V207.30.16102 1181-00781 Bottom Rollers with 20mm Bolt Hole
Carrier Rollers
1181-01011 Carrier Roller
Sprockets
V14520824V VO1 Sprocket, 21T - 16 B/H
Idlers
Idl
V1181-00721V 14510972 Idler Group
Page 695
MODEL: Volvo EC300LC, EC340LC
Serial Nos: EC340LC: (53Lk) 18-Bottom Rollers, 4-Carrier Rollers
EC300LC: 53Lk)

Your Track Groups
VCR1770 Link, R/H
VCR1771 Link, L/H
VCR1631 Master Pin
VD01070E0N10 Spacer
Track Hardware
V1S1859 Track Bolt 3/4" X 2.13/64
Track Shoes
VCR2264/30 Shoe, 3 B 30"
VCR2264/36 Shoe, 3 B 36"
Bottom Rollers
VLH27 14043993 Roller Assembly S/F Excavator Style (12-Required)
VLH27V Roller Assembly S/F Excavator Style (Optional)
Carrier Rollers
V14043256 14043256 Carrier Rollers (For EC300LC Model)
VFT2990V Carrier Rollers (Optional)
Idlers
V14026414 14026414 Idler Group (For EC300LC Model)
V11700924 Idler Group (For EC340LC Model)
Sprockets
14265480 Sprocket 23-Tooth, 24-Bolt Hole
VQ14060B0M01 Sprocket Weld On Rim (For EC300LC Model)
Page 696
MODEL: Volvo EC330B, EC360, EC360LC, EC360B,
EC420
Serial Nos: EC330B: (48Lk) 16-Bottom Rollers, 4-Carrier Rollers
EC360: (48Lk) 16-Bottom Rollers, 4-Carrier Rollers
EC360 LC: (50Lk) 18-Bottom Rollers, 4-Carrier Rollers
EC360B: (50Lk) 18-Bottom Rollers, 4-Carrier Rollers
EC420: (49Lk)

VCR4235/48HD 1182-01080 Chain, 48L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/48HDV 1182-01080 Chain, 48L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
VCR4235/50HD 1182-00671 Chain, 50L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm)
VCR4235/50HDV 1182-00671 Chain, 50L, Sealed & Greased, w/ Master Pin (Bushing OD = 71.4 mm) (Optional)
Your Track Groups
V081402 Master Pin
VCR1541 Seal Washer
VCR1540 Spacer
VCR1540HD Spacer
Track Hardware
Track Shoes
Page 697
Bottom Rollers
V14501642V 14501642 Roller Assembly (For EC330B Model Only)
VLH90 1081-04411 Roller Assembly (For EC360, EC420 Models Only)
VLH90V Roller Assembly (For EC360, EC420 Models Only) (Optional)
Carrier Rollers
VCR2876V 1081-01820 Carrier Rollers (Optional)
V5604047 17428140 Carrier Roller (EC420 Model)
Idlers
V1081-03910V 1081-03910 Idler Group With Brackets
V14024008 Idler Group With Brackets (For EC420 Model)
Sprockets
V1081-01850V 1081-01850 Sprocket 24 Bolt - 21 Tooth
V14023979 Sprocket Rim (For EC420 Model)
Page 698
MODEL: Volvo EC390LC
Serial Nos: EC390LC: (51Lk) 18-Bottom Rollers, 4-Carrier Rollers

VMT14/51 11701786 Chain, 51L, Sealed, w/ Master Pin
Your Track Groups
VKM1398 Sealed Pin
VKM804 Spacer
Track Hardware
V79035320 Track Nut
Track Shoes
VCR4236/28M Track Shoe
Shoe, w/ 2 B 28"
28 , w/ Mud Hole
Bottom Rollers
Carrier Rollers
VFT2990V Carrier Rollers (Optional)
Sprockets
14263404 Sprockets
Page 699
MODEL: Volvo EC450LC, EC460LC, EC460BLC
Serial Nos:
EC450LC: (51Lk)
EC460LC: (52Lk) 20 S/F Roller, 4 T/C Roller
EC460BLC: (52Lk) 20 S/F Roller, 4 T/C Roller

VKM1402/51 11700139-6 Chain, 51L, Sealed, w/ Master Pin
VKM1402/52 1182-00700 Chain, 52L, Sealed, w/ Master Pin
Your Track Groups
VKM1398 Sealed Pin
VKM1399 Master Pin
VCR1541 Seal Washer
VKM804 Spacer
Track Hardware
V175.32.11210
V175 32 11210 Track
T k Shoe
Sh Bolt,
B lt 24MM X 76MM X 1
1.5mm
5 thread
th d pitch
it h
V178.32.11220 Track Shoe Nut, 24MM Square
Track Shoes
Bottom Rollers
VLH90 14263401-3 Roller Assembly
Carrier Rollers
VFT2990 14263402-1 Carrier Roller
VCR2876 1081-01820 Carrier Roller (For EC460LC, EC460BLC Models)
VCR2876V 1081-01820 Carrier Roller (For EC460LC, EC460BLC Models) (Optional)
Sprockets
Idlers
Page 700
V1081-02222V Idler Group (EC460)
Page 701
MODEL: Volvo EC650
O.D.= 85.6 mm Bolt Diameter = 1"
Serial Nos:
EC650: (48Lk)

VCR4200/48 11700717-9 Chain, 45L, Sealed, w/ Master Pin
Your Track Groups
VCR2508 Track Link R/H
VCR2509 Track Link L/H
VCR4210 Track Pin
VCR4213 Master Pin
VCR4250 Complete Master Pin Group
VCR1823 Seal Washer
Track Hardware
V9M7445 Track Bolt 1 X 2 31/32
V1S6421 Track Nut 1"
Track Shoes
VCR4705/24 Shoe, 2 B 24"
VCR4705/30 Shoe, 2 B 30"
VCR4705/36 Shoe,
Sh 2 B 36"
Bottom Rollers
14263419-5
Carrier Rollers
14263420-3
Sprockets
14263421-1
Idlers
Page 702
MODEL: Wirtgen 1900DC, 1900SM
Serial Nos: 1900DC: (24Lk)
1900SM: (24Lk)

Your Track Groups
VKM680 Link R/H
VKM681 Link L/H
VFT684 Track Pin
Your Track Groups
VFT684HD Track Pin
Track Hardware
Track Shoes
VFT1234/265P Track Shoe 10" Poly Without Mud Hole
Bottom Rollers
VVA380V Roller Assembly S/F (Optional)
Sprockets
V55602 Sprockets
Page 703
MODEL: Wirtgen 2000DC, 2000VC
2000VC: (23Lk)

VEZ1026A0Y23 121236 Chain, 23L, Sealed & Greased, w/ Master Pin
Your Track Groups
Track Hardware
Track Shoes
Bottom Rollers
VVA345 118717 Roller Assembly S/F
Idlers
121231 Idler Group
Sprockets
VR14020B0Y01 121234 Sprockets
Page 704
MODEL: Wirtgen 2100DC, 2100DCL, 2100DCR, 2100VC,
2100VCL
2100DCL: Note, need to confirm number of links
2100DCR: Note, need to confirm number of links
2100VC: Note, need to confirm number of links
2100VCL: Note, need to confirm number of links

VCR1766/48 Chain, 48L, Unsealed. w/ Master Pin
VCR1766/51HDV Chain, 51L, Unsealed, w/ Master Pin (Optional)
Your Track Groups
VCR1732 Link L.H.
VCR1733 Link R.H.
VCR3196 Track Pin
VCR241 Bushing
VCR4873 Master Pin
Track Hardware
Track Shoes
VCR3226/20 Shoe 3B 500mm With Mud Hole
VCR3226/20P Shoe 3B 500mm Poly Bonded
Bottom Rollers
Idlers
Sprockets
Page 705
ValuePart
"Torque and Turn"
Track Bolt Torque Specifications
Inch Standard Applications
Track Bolt Size Torque Min - Max Initial Bolt Torque and
Additional Turn .
Ft. Pounds of Torque Ft. Pounds of Torque Plus Turn
7/16" - 20 UNF 86 - 94 FT / LBS 32 FT / LBS + 120 DEGREES
1" - 14 UNF 1160 - 1280 FT / LBS 410 FT / LBS + 120 DEGREES
1-1/8" - 12 UNF 1680 - 1860 FT / LBS 600 FT / LBS + 120 DEGREES
Metric Applications
Track Bolt Size Torque Min - Max Initial Bolt Torque and
Additional Turn .
Foot Pounds of Torque Foot Pounds of Torque and turn
M10 x 1.0 64 - 74 FT / LBS 25 FT / LBS + 120 DEGREES
Page 706
Bolt Torque Values shown are for use with ValuePart Track Hardware only.
Always remove paint and/or debris from the rails, links, and track shoe mounting
surfaces before assembling track shoes to the rails.
Re-Torque all Hardware between 50-100 Hours
Page 707
MODEL: Misc. Excavator, Pavers, Rock Drills, Etc.
Serial Nos:
(40L) ATLAS: 1104, 1122B, 1204
(44L) ATLAS: 1202D
(47L) ATLAS: 1122, 1200, 1202, 1301,
1302, 1602
(52L) ATLAS: 1301 ELC
(37L) BARBER GREEN: BG225, BG235,
BG245, RX40B
(37L) CMI-CAT: PR375
(42L) DEMAG: DF100C, DF10C
(46L) DEMAG: DF120C, DF150C
(43L) HOES: 9009K Paver
(54L) HOES: 11011K, Mark IV, Mark V,
Mark VI
(66L) HOES: Gigant 680, Super Gigant
(41L) LIEBHERR: R900, R901, R901B,
R911
(42L) LIEBHERR: R308, R310
(51L) LIEBHERR: R900-LC, R901-BLC,
R901-LC, R911-LC

VLH1/34 Track Chain 34L Unsealed With Master Pin
Your Track Groups
VLH1 Link Segment
VLH139 Track Link R.H..
VLH140 Track Link L.H..
VCR2678 Track Pin
VCR3012 Master Pin
Page 708
VCR3550 Spacer
Bottom Rollers
VVA1165 Track Roller Assembly
Atlas 857947
Liebherr 5205013
Page 709
MODEL: Misc. Excavator, Pavers, Rock Drills, Etc.
(38L) ATLAS COPCO: ROC601, ROC604
ROC606
(43L) ATLAS COPCO: ROC604, ROC642
ROC701, ROC712H
(47L) ATLAS COPCO: ROC712HC,
ROC722HC, ROC742HC, ROC810H
ROC812H, HC, HCS, HT, ROC820H
(51L) ATLAS COPCO: ROC912HC,
ROC920HC, HCT
(51L) BARBER GREEN: SA144A, SA145,
(53L) BARBER GREEN: SA147, SA150
(42L) BENATI: Max 70 Pony
(43L) BENATI: BEN90CS
(30L) CMI-CAT: PR225, PR400, PR525,
SF175
(45L) CMI-CAT: SF250
(45L) COSMOTER: 10C, Bat10C, Bat94C
(35L) DEMAG: CRD25
(42L) DEMAG: CRD45, CRD50HD,
CRD65HD, CRD70HD
(44L) DEMAG: DF9
(42L) FAI: 500C
(44L) FAI: 470, 750, 750C
(52L) GOMACO: GP2500, GP2500S
(35L) INGERSOLL-RAND:
INGERSOLL RAND LM300
(46L) INGERSOLL-RAND: ECM440
(39L) LALTESI: 101
(40L) LALTESI: L40C
(43L) LALTESI: L30C
(45L) LALTESI: 111
(33L) LAVERDA: M84R
(34L) LAVERDA: 3300
(35L) LAVERDA: M60R
(37L) LAVERDA: M80R
(42L) LAVERDA: M92R
(38L) MAC-MOTER: M4, M5, M6, ZR6B
(40L) MAC-MOTER: M7, ZR6BLC
(35L) O AND K: RH2.4, RH2.5
(40L) O AND K: RH2.8, RH2.8C
(42L) PMI: HD450, PMI450
(38L) POCLAIN-CASE: 35CK
(40L) TAMROCK: DH400, DHAT
(44L) TAMROCK: DHA400

VFT1351/24 Track Chain 24L Unsealed With Master Pin
VFT1351/35V Track Chain 34L Unsealed With Master Pin (Optional)
VFT1351/36V Track Chain 36L Unsealed With Master Pin (Optional)
Page 710
Your Track Groups
VKM680 Link R/H
VKM681 Link L/H
VFT684 Track Pin
Sealed & Greased and Track Groups
VFT1351/24HD Track Chain 24L Sealed & Greased With Master Pin
Your Track Groups
VFT684HD Track Pin
Track Hardware
Track Shoes
VFT1234/16P Shoe, 16" Poly
Page 711
Bottom Rollers
VVA1267 Track Roller Assembly
Benati 2103041
Cosmoter 11760170
FAI, 030.03.050
Laltesi 68204
Mac-Moter 11760170
PMI 960014
VVA380 Roller Assembly (For Gomaco 2500, 2500S Models)
VVA380V Roller Assembly (For Gomaco 2500, 2500S Models) (Optional)
Sprockets
VVA324 Weld On Sprocket Rim (For Gomaco 2500, 2500S Models)
Idlers
VPT8044C0Y00 Idler Group With Slide Bars (For Gomaco 2500 Models)
VPZ704900N00 Hydraulic Tension Cylinder (For Gomaco 2500 Models)
VPY401800N00 Spring Assembly (For Gomaco 2500 Models)
Page 712
Lubricants and Other items
V69038901 AT69038901 V-Track Molylube PA TP Lubricant-55 gal drum
V690308401 AT690308401 V-Track Molylube PA TP Lubricant-5 gal drum
VCR1764 AT5M2080 Track Idler/Roller Oil Nozzle
VAT90363 AT90363AM Track Press Evacuator & Lubricator Needle
VSH1200 Lubrication Kit For SLT Tracks
Page 713
Safety Hooks and Repair kits
V001100Y32125 Safety Hooks 1-Ton
V9001700N000 Repair kit for 1-Ton safety hook
V002100Y42163 Safety Hooks 2.1/2-Ton
V9002700N000 Repair kit for 2.1/2-Ton safety hook
V005100Y52196 Safety Hooks 5-Ton
V9005700N000 Repair kit for 5-Ton safety hook
V9007700N000 Repair kit for 7.1/2-Ton and 12.1/2- Ton safety hook
Page 714
CAT - GET
V1U3202 1U3202 TIP-LONG
V6Y3222 6Y3222 TIP-LONG
V7T3402 7T3402 TIP-LONG
V9W8452 9W8452 TIP-LONG
V9W8552 1U3552 TIP-LONG
V6I6602 6I6602 TIP-LONG
V1U3201 1U3201 TIP-SHORT
V7T3401 7T3401 TIP-SHORT
V9W8451 9W8451 TIP-SHORT
V1U3209 1U3209 TIP-PENETRATION
V9J4259 9J4259 TIP-PENETRATION
N/S 9J4309 TIP-PENETRATION
V9J4359 9J4359 TIP-PENETRATION
V6Y7409 6Y7409 TIP-PENETRATION
V9W8459 9W8459 TIP-PENETRATION
V9W8559 9W8559 TIP-PENETRATION
V7I7609 7I7609 TIP-PENETRATION
V4T2203 4T2203 TIP-ABRASION
V9N4302 4T2303 TIP-ABRASION
V9W1453 9W1453 TIP-ABRASION
V9N4552 9W1553 TIP-ABRASION
N/S 9N4252 TIP-HEAVY DUTY LONG
V9N4302 9N4302 TIP-HEAVY DUTY LONG
N/S 8E4402 TIP-HEAVY DUTY LONG
V7Y0602 7Y0602 TIP-HEAVY DUTY LONG
V9N4253 9N4253 TIP-HEAVY DUTY ABRASION
V7T3403 7T3403 TIP-HEAVY DUTY ABRASION
V6Y2553 6Y2553 TIP-HEAVY DUTY ABRASION
N/S 1U3302PT TIP-PENETRATING ABRASION
N/S 1U3352PT TIP-PENETRATING ABRASION
N/S 7T3402PT TIP-PENETRATING ABRASION
N/S 9W8452PT TIP-PENETRATING ABRASION
N/S 9W8552PT TIP-PENETRATING ABRASION
N/S 6I6603PT TIP-PENETRATION ABRASION
N/S 4T4703PT TIP-PENETRATING ABRASION
N/S 1U3202WTL TIP-TWIN TIGER
V1U3352WTL 1U3352WTL TIP-TWIN TIGER
N/S 7T3402WTL TIP-TWIN TIGER
N/S 9W8452WTL TIP-TWIN TIGER
N/S 9W8552WTL TIP-TWIN TIGER
Page 715
VT1U3202 1U3202TL TIP-TIGER
VT7T3402 7T3402TL TIP-TIGER
V3G8250 3G8250 TIP-WIDE
N/S 1U3302RC TIP-ROCK CHISEL
N/S 1U3352RC TIP-ROCK CHISEL
V7T3402RC 7T3402RC TIP-ROCK CHISEL
N/S 9W8452RC TIP-ROCK CHISEL
V1U3552RC 1U3552RC TIP-ROCK CHISEL
N/S 1U3352SYL TIP
N/S 9W8452SYL TIP
N/S 9W8552SYL TIP
V4T2303RP2 4T2303RP2 TIP-ROCK PENETRATION
V4T2353RP2 4T2353RP2 TIP-ROCK PENETRATION
V9W1453RP2 9W1453RP2 TIP-ROCK PENETRATION
V9W1553 RP3 9W1553 RP3 TIP-ROCK PENETRATION
V6Y0309 6Y0309(9J8910) TIP-RIPPER
V6Y0359 6Y0359(9J8920) TIP-RIPPER
V9W2451 9W2451 TIP-RIPPER
V9W2452 9W2452 TIP-RIPPER
V4T4453 4T4453 TIP-RIPPER
V4T4501 4T4501 TIP RIPPER
TIP-RIPPER
V6Y5230 6Y5230(2D5572) TIP-SCARIFIER
V9F5124 9F5124 SHANK
V8J7525 8J7525 ADAPTER-STANDARD
V6Y3224 6Y3224 ADAPTER-STANDARD
V6Y3254 6Y3254 ADAPTER-STANDARD
N/S 8J7525HD ADAPTER-HEAVY DUTY
N/S 6Y3254HD ADAPTER-HEAVY DUTY
V3G6304 3G6304HD ADAPTER-HEAVY DUTY
V3G8354 3G8354HD ADAPTER-HEAVY DUTY
V1590464 8E6464HD ADAPTER-HEAVY DUTY
V8E9490 8E9490 ADAPTER
V6I6354 6I6354 ADAPTER
V1590464 6I6464 ADAPTER
V3G9494 3G9494 ADAPTER
V4T1204 4T1204 ADAPTER-WELD-ON
V1U1254 1U1254 ADAPTER-WELD-ON
V1U2209 1U2209 ADAPTER-BOLT ON
V3G4259 3G4259 ADAPTER-BOLT ON
Page 716
V4T4307 4T4307 ADAPTER-BOLT ON
V8E5358 8E5358 ADAPTER-BOLT ON
V8E5359 8E5359 ADAPTER-BOLT ON
V6Y6335 6Y6335-9W1879 UNITOOTH
V1U1857 1U1857 UNITOOTH
V4J8665 4J8665 ROUTER BIT
V7J3023 7J3023 ROUTER BIT
N/S 4T0668 ROUTER BIT
V5V4311 5V4311 FINGER SHANK
V9J6586 9J6586 SHANK
V2V6628 2V6628 TIP-WELD ON
V8K9171 8K9171 TIP-BOLT ON
V3S3225 3S3225 RETAINER-BAR
N/S 3S4228 BAR
V7K2939 7K2939 TIP
V8K9189 8K9189 TIP-WELD ON
V4S7928 4S7928 CLEANER BAR
V6J8814 6J8814 PROTECTOR
V8E6208 8E6208 PIN
V6Y3228 6Y3228 PIN
V8E6258 8E6258 PIN
V9J2308 107-3308 PIN
V8E6358 8E6358 PIN
V7T3408 7T3408 PIN
V8E0468 8E0468 PIN
V6Y8558 6Y8558 PIN
V8E6209 8E6209 WASHER
V1078559 8E5559 WASHER
Page 717
Komatsu - GET
N/S 20X-70-14160 TIP-LONG
V205-70-19570 205-70-19570 TIP-LONG
V207-70-14151 207-70-14151 TIP-LONG
N/S 208-70-14152 TIP-SHORT
N/S 208-70-14270 TIP-LONG
N/S 209-70-54210 TIP-LONG
V21N-72-14290 21N-72-14290 TIP-LONG
N/S 205-70-19570RC TIP-ROCK CHISEL
N/S 205-70-19570RE TIP-ROCK
N/S 207-70-14151RE TIP-ROCK
N/S 205-70-19570TL TIP-TIGER
N/S 20X-70-14151 ADAPTER
N/S 20E-70-K2460 ADAPTER
N/S 205-939-7120 ADAPTER
N/S 206-939-5120 ADAPTER
N/S 208-939-3120RC ADAPTER
N/S 208-939-3120-AHHEAVY DUTY
N/S 209-70-74140 ADAPTER
N/S 21N-70-14140 ADAPTER
V092.44.02496 09244-02496 PIN
N/S 09244-02508 PIN
N/S 09244-02516 PIN
N/S 09244-03036 PIN
Page 718
JCB - GET
N/S 531-03205 TIP
N/S 531-03208 SIDE-CUTTER
N/S 531-03209 SIDE-CUTTER
Page 719
Hensley - GET
VX156 X156 TIP-SHORT
VX156L X156L TIP-LONG
VT156 X156T TIP-TIGER
VX156WT X156WT TIP-TWIN TIGER
N/S X156LP TIP-LONG
VX220 X220 TIP-STANDARD
N/S X220T TIP-TIGER
N/S X290T TIP-TIGER
VX330 X330 TIP-LONG
VX330T X330T TIP-TIGER
N/S X370T TIP-TIGER
VX400 X400 TIP-LONG
N/S X400T TIP-TIGER
N/S X410T TIP-TIGER
N/S X410T TIP-TIGER
V230x156 230x156 ADAPTER
V550X156 550X156 ADAPTER
N/S 940X370 ADAPTER
N/S 940X410 ADAPTER
N/S 330WN WELD ON NOSE
V400WN 400WN WELD ON NOSE
VP400HD P400HD PIN
VP475HD P475HD PIN
VK290S K290 STEEL PIN
VK330S K330S STEEL PIN
N/S K450S STEEL PIN
VP400SA P400SA SPOOL
VP400SBS P400SB WEDGE
Page 720
H&L - GET
V23SP 23SP TIP-PENETRATION
V23ST 23ST TIP
VT23 23TL TIP-TIGER
V23WTL 23WTL TIP-TWIN TIGER
V23WT 23WT TIP-TWIN TIGER
N/S 240THD TIP-TIGER
N/S 240TW TIP-TWIN TIGER
V3CH 3CH TIP-CRIMP
V2A 2A TIP-FABRICATED
N/S 2300-10 ADAPTER
V2300-75 2300-75 ADAPTER
V2300FL 2300FL ADAPTER
N/S 834-23 ADAPTER
V23P 23P PIN
Page 721
Daewoo - GET
N/S S55-18 TIP
N/S 2713-9041 TIP
N/S 2713-9038 TIP
N/S 2713-9042 ADAPTER
N/S 2713-9037 ADAPTER
N/S 2713-9044 TIP
N/S 2713-1217 TIP
N/S 2713-1219 TIP
N/S 2713-1271 TIP
Page 722
Hyundai - GET
N/S E161-3027 TIP
N/S E161-3027TL TIP-TIGER
N/S E161-3017 ADAPTER
N/S E262-3046 TIP
N/S E262-3027 ADAPTER
Page 723
ESCO - GET
V18TL 18TL TIP
N/S 25T TIP
V25S 25S TIP
V30S 30S TIP
V35S 35S TIP
V40S 40S TIP
V45S 45S TIP
N/S 18VIP TIP-TIGER
N/S 25VIP TIP-TIGER
V30VIP 30VIP TIP-TIGER
N/S 21VIP TIP-TIGER
N/S 21TVIP TIP-TWIN TIGER
V27TVIP 27TVIP TIP-TWIN TIGER
V37TVIP 37TVIP TIP-TWIN TIGER
N/S 833-18 ADAPTER
N/S 855-25 ADAPTER
N/S 3807-25 ADAPTER
N/S 3807-30 ADAPTER
N/S 3808-35 ADAPTER
N/S 3809-40 ADAPTER
N/S 25R112 TIP
N/S 25R112HD TIP
N/S 25RC12 TIP
N/S 25RC10 TIP
N/S 3861-25RC ADAPTER
N/S 35R14-1 TIP
V18PN 18-PN LOCK
V25/30PNP 25-30-PN LOCK
V35PNP 35-PN LOCK
V40PNP 40PN LOCK
V45PNP 45PN LOCK
V18LK 18-LK RUBBER
V25/30LKR 25-30-LK RUBBER
V35/40LKR 35-40-LK RUBBER
V45LKR 45-LK RUBBER
Page 724
Bofors - GET
N/S 4047167-31102 TOOTH
N/S 3031537-32101 TOOTH
N/S 4046797-31004 ADAPTER
N/S 4046819-32004 ADAPTER
N/S 3027512 TOOTH
N/S 4047166 TOOTH
N/S 4046799 TOOTH
N/S 3031539 TOOTH
N/S 3027580 TOOTH
N/S 4046729 TOOTH
N/S 3027689 TOOTH
N/S 4038210 ADAPTER
N/S 3032682 TOOTH
Page 725
V-Track Link Segments
VCA307V LINK SEGMENT
VCR2849V LINK SEGMENT
VCR4235HDV LINK SEGMENT
VCR5465V VLSD5HHDV LINK SEGMENT
VHT17HDV LINK SEGMENT
VID1354V LINK SEGMENT
VKB100V LINK SEGMENT
VKM1170HDV LINK SEGMENT
VKM2094V LINK SEGMENT
VKM2868V LINK SEGMENT
VKM782FV LINK SEGMENT
VKM906HD LINK SEGMENT
VKM959FV LINK SEGMENT
VLSEX60V LINK SEGMENT
VLS330V LINK SEGMENT
VLSCN550V LINK SEGMENT
Page 726
Glossary / Terms / Notes
Disclaimer
All manufacturer's names, numbers, symbols and descriptions are
used for reference purposes only and it is NOT implied that any part
listed is the product of these manufacturers. Parts listed are
produced by ValuePart Incorporated, or of its subcontractors.
Details and application data is Subject To Change Without Notice.
The information contained in this catalog, is to the best of our

knowledge
accurate and correct at the time of publication. However, No
responsibility
can be accepted for any inaccuracies or omissions, which may have
occurred.
We suggest you consult the specific parts books or other OEM
application
information to verify track chain length, pitch and bolt hole
diameter, track shoe type, width and bolt hole diameter, updated
part numbers, and applications prior to placing any orders.
*UNLESS OTHERWISE SPECIFIED, ALL TRACK SHOES ARE CLOSED CENTERED

Description Abbreviations
Link LK
Split Master Link SML
Single Bar Grouser 1B
Shoe
Double Bar Grouser 2 B
Shoe
Triple Bar Grouser 3B

Shoe
Extreme Service ESS
Shoe
Sealed and SALT
Lubricated Track
Single Flange S/F
Double Flange D/F
Track Link Segment: TLS
RH & LH link with the
bushing & pin for
adding to chain
lengths.
Track Pin and TPBG

Bushing Group
Track Bushing Group TBG
Left Hand L.H.

Right Hand R.H.
Page 727

All Cat 107

Uploaded by

Copyright:

Available Formats

All Cat 107

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

All Cat 107

Uploaded by

Copyright:

Available Formats

MODEL: BOBCAT - Skid Steer: T190, T200, T250, T300,

NEW VPI # OEM# Description

NEW VPI # OEM# Description

NEW VPI # OEM # Description

Sealed Chains and Track Groups

NEW VPI # OEM # Description

Sealed Chains and Track Groups

Sealed Chains and Track Groups

Sealed Chains and Track Groups

Sealed Chains and Track Groups

NEW VPI # OEM # Description

Sealed Chains and Track Groups

NEW VPI # OEM # Description

Sealed Chains and Track Groups

NEW VPI # OEM # Description

Sealed Chains and Track Groups

Specs Track Pitch = 6.687" , Link Ht.= 101.6mm, Bushing

Sealed Chains and Track Groups Case 1150B

NEW VPI # OEM # Description

Sealed Chains and Track Groups

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

Note: Verify Link Casting Number Before Ordering Track Components.

NEW VPI # O.E.M. # Description

New Style Unsealed Chains

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

Unsealed Chains *Forestry Application*

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

NEW VPI # O.E.M. # Description

Sealed & Greased Chains

NEW VPI # O.E.M. # Description

Unsealed Chains and Track Groups

Sealed Chains and Track Groups

Sealed Chains and Track Groups

NEW VPI # OEM# Description

Sealed Chains and Track Groups

NEW VPI # OEM# Description

Sealed Chains and Track Groups 9/16" B/H

VCR3287 Front Idler Group w/Brackets (Shaft-Large End)

NEW VPI # OEM# Description

Unsealed Chains Forestry Application

Lubricated Chains and Track Groups NON-PPR