Handtool Pliers

W W W. L I N D S T R O M T O O L S .
U S
Welcome to the Lindström World
of High Precision
The Lindström Catalog displays our full

range of high precision cutters and pliers,
tweezers, Ergo® screwdrivers, torque testers
and screwdrivers, and a representative
selection of Specially Engineered Tools.
B
Lindström
CONTENTS
2 Introduction
About Lindström ..............................................................................................................................................................................................................................
About Quality ........................................................................................................................................................................................................................................
2
3
Lindström tools for electronics assembly ................................................................................................................................................. 4
Lindström tools for aerospace and defense ......................................................................................................................................... 6
Lindström tools for jewelry and hobby .......................................................................................................................................................... 8
Lindström tools for medical device manufacturing .................................................................................................................... 10
12 Cutters and pliers

Lindström Cutters for every application ......................................................................................................................................................
Cut result or surface ..................................................................................................................................................................................................................
12
14
Cutter head shape ........................................................................................................................................................................................................................ 15
Lindström precision Pliers for demanding users ............................................................................................................................ 16
Pliers properties ............................................................................................................................................................................................................................... 18
Product selection guide ....................................................................................................................................................................................................... 20
Product options ................................................................................................................................................................................................................................ 21
Introduction RX Series – The ultimate in comfort, performance and precision ............................... 22

Listings and Specifications ............................................................................................................................................................................................. 24
Miscellaneous Cutters – Listings and Specifications .............................................................................................................. 31

Introduction EX Series – High precision EX Series Cutters and Pliers .......................................................... 33
Introduction 80 Series – The original Lindström 80 Series Cutters .................................................................... 40

Introduction Supreme Series – Supreme Series for dependable results ................................................... 46

Introduction HS Series – The original ergonomic handtools ........................................................................................ 54

Introduction LF Series – For use in designated Lead-Free work zones ...................................................... 58
Introduction Specially Engineered Tools – Unique tools for every situation ......................................... 60
Tools Listings and Specifications .......................................................................................................................................................................... 62
69 Tweezers
Introduction Tweezers – High-performing and precise Tweezers .........................................................................
Tweezers styles for every application ..............................................................................................................................................................
69
72
110 Torque products

Introduction Torque Products ......................................................................................................................................................................................
High precision Torque Screwdrivers ..................................................................................................................................................................
110
110
Digital Torque Tester™ ........................................................................................................................................................................................................... 111
114 ERGO Screwdrivers

®
Introduction ERGO® Screwdrivers – For outstanding precision and comfort ..................................... 114
122 Spare Parts

Always ready to go with Lindström spare parts – Listings and Specifications ................................ 122
124 Warranty and Services

Warranty ....................................................................................................................................................................................................................................................... 124
Lindström Sales and Service contact information ....................................................................................................................... 125
126
Index
Index by type ........................................................................................................................................................................................................................................ 126
1
Introduction
LINDSTRÖM – PERFECTING HANDTOOLS SINCE 1856
About Lindström
Lindström is the oldest continuous manufacturer of handtools in
existence and yet one of the most forward-looking brands in the world.
We developed the scientific approach to handtool design and created the first truly
ergonomic pliers and cutters. Since 1980 we have created more than 1,500 unique tool
designs, many of which are now standard types in the electronics and medical device
manufacturing industries.
Some competitors have been able to implement one facet or another of our manufacturing
process. Others have copied the form, appearance and actual part numbers of Lindström
tools. However, none have been able to successfully blend all the elements required to
achieve the level of performance recognized as true Lindström Precision Tools.
Lindström is one of the Snap-on Industrial brands.
The expression “the right tool for the job” is perfectly appropriate
in a discussion about handtools. Whether in the hands of a skilled
professional or a new operator, the right tool can make the most
difficult operation a simple task.
2
About quality
Lindström constantly works on improving quality and the manufacturing process.
Perfection is impossible but that is the goal we set for ourselves, and it is the
standard our customers expect. Any customer who believes a Lindström Brand
product is not performing to their expectations should contact us immediately. At
any time customers are invited to send tools to us for a free evaluation.
We know it can be aggravating when products do not perform as expected, so

we try to make it as easy as possible to repair or replace tools when indicated.
You are our customer. And our customers know good tools. So we rely on you to
let us know when a tool falls short of your expectations so we can correct course
immediately and keep striving for 100% success.
Thank you for choosing to be a Lindström customer.

We appreciate you.
3
Introduction
ELECTRONICS ASSEMBLY
electronics
Lindström tools for
assembly
Since the early days of the electronics
industry Lindström has been the brand of
choice for manufacturers performing high
volume work and critical applications.
Our RX Series ergonomic pliers were the

first handtools designed to fit the hands
and needs of the user. RX Series revolu-
tionized the handtool industry, beginning
in electronics assembly and aerospace
production.

As these industries matured devices
shrank in size and increased in complexity
so Lindström developed new profiles on
pliers and cutter types to meet their de-
mands: Ultra-Flush® cutters for anti-shock
military applications, tapered and relieved
cutters to get in between and under tiny
components, super-radiused pliers to
bend sensitive wire without damage, and
extra-small tip cutters for microscopy
applications. Still, the most valued feature
of Lindström tools is high quality, from the
famous Swedish steel to the attention to
details like fit and finish.

Most Lindström cutters can be recondi-
tioned for a modest fee, reducing the total
cost of ownership. See page 125 for
more information on our reconditioning
program.
4
RX 8248 Flush cutters: 45° angled
tips, long 18 mm jaws for improved
access.
The micro-adjustable torque screwdriver is

an excellent choice when tightening delicate
screws on smart phones and tablets. 7892 Supreme bent nose pliers provide
Picture shows MAL500-3. good reach and a non-marring gripping
surface. Users gain better visibility and
can operate with a comfortable wrist
position with our 60° bent tip pliers.
51S-SA-ET tweezers: soft ESD safe,

cleanroom compatible Ergo-Touch
grips.
5
Introduction
AEROSPACE AND DEFENSE
aerospace
and defense
Lindström customers solve problems. Many of our
standard off-the-shelf pliers and cutters are used
throughout critical industries like aerospace, defense
and avionics manufacturing. When presented with a
need to prepare prototypes, insert or extract unique
components, or cut proprietary hard wire, our custo-
mers turn to Lindström for Special Engineered Tools
made to order.
Lindström has developed tools used in specialized

applications for the largest names in medical device
manufacturing and for small start-up companies
developing new technology. Every project receives
the same attention to detail and a tool that is right
for the job at hand. To make the process easy
Lindström has no minimum order quantity on
Special Engineered Tools.
Our designers and manufacturers representatives

work directly with production engineers to ensure
success.
We thrive on solving problems with our customers.
Contact one of our authorized distributors, manufac-

turers’ representatives or our office directly to start
the process of designing your special tool today.
6
RX 8148 Ultra-Flush® diagonal cutter
with tapered and relieved head is ideal
for use in confined spaces and for
rework.
341A cut and form pliers put stress

relief in component lead and trims to
length with one squeeze.
8140 oval head cutter and 7891 chain

nose pliers are used extensively for
wire harness work and assembly.
7
Introduction
JEWELRY AND HOBBY
jewelry
and hobby
For over 150 years Lindström handtools have
been the choice of professional jewelry makers.
Today makers of jewelry and hobby creations –

and a variety of artists – choose to use our pliers
and cutters to create their unique designs, to
precisely bend wire and consistently execute
flush cuts.
Comfort, balance and ergonomics are important

to Lindström users. Our products are an
extension of their hands, the means to bring their
imagination to fruition and tools they rely on.
Exacting users demand a flush cut that is truly

flush, a joint that keeps the jaws perfectly
aligned, and an edge that stays sharp. Trust is
crucial. Artistic creations often require expensive
materials, and there is little tolerance for waste.
8
7892 Supreme pliers are favored by
many bead and jewelry artists.
RX 7890 and RX 7892 pliers allow

precise bends and feature ultimate
ergonomic handles.
8141 cutters provide Flush cuts on

bead wire and precious metals.
9
Introduction
MEDICAL DEVICE MANUFACTURING
medical device
manufacturing
Lindström is the cutter of choice for manufacturers
of medical devices – both for trimming materials
and assembling high-tech miniature electronics.
For over thirty years, Lindström cutters have

been used to manufacture pacemakers, stents,
catheters, guide wires and more.
Lindström technological improvements are driven

by our customers and their demand for reliable,
precise and versatile tools.
Lindström has led the way in providing handtools

that perform to the specifications of manufaturers
for a wide range of materials including platinum,
nitinol, stainless steel, titanium, and proprietary
meshes and weaves.
Our specially engineered PS, PSF and PSP cutters

are a cost-effective alternative to expensive and
brittle cutters made of carbide or exotic alloys.
Most Lindström cutters can also be reconditioned

for a modest fee, further reducing the cost of
ownership. See page 125 for available services.
10
8154PSP cutter used to trim a stent.
Technician cuts cathether wire to

length using 80 Series 8150 cutter.
Carbon fiber tweezers 249CFR-SA is

often used in laboratory and medical
applications when handling sensitive
components or where chemical
resistance is needed.
11
Cutters and pliers
PRECISION CUTTERS BY LINDSTRÖM
for
Lindström Cutters
every application
Lindström cutters are designed to perform with ease, minimize
operator fatigue and improve productivity. Through symmetric
components, exact adherence to specifications and consistent
hardening, Lindström delivers hallmark reliability.
The Lindström formula for success, refined over the last 150-
plus years we’ve been in business, rests upon the formula for
the steel from which we make our tools, very similar to that
used to manufacture high-performance ball-bearings. In addi-
tion to iron and other key materials we add a pinch of chrome
and 1% carbon. The use of ball-bearing grade steel and app-
ropriate heat treatment ensures Lindström cutters last longer
than other brands used in the same applications. This is the
steel used for Lindström RX Series, 80 Series, EX Series and
Supreme Series cutters and pliers.
Another characteristic of a Lindström cutter is lubricity, the

ease with which the tool makes its cut, as if there is a built-in
lubricant. Measuring on a Rockwell C scale, Lindström cutters
are elevated to a hardness of 63–65 HRC on the cutting edge.
For most manufacturers this hardness level would create a
high breakage rate. Yet because of the steel and proper con-
sistency, even when used beyond the rated capacity (as they
often are!), Lindström cutters have remarkably little breakage.
12
Lindström’s world-famous
precision cutters are divided into
four main groups – each with its
own unique characteristics:
RX Series cutters
80 Series cutters
HS Series cutters
EX Series cutters
13
Cutters and pliers
PRECISION CUTTERS BY LINDSTRÖM
Cut result or
surface
Micro-Bevel® cut
• Designed to meet the high quality requirements of
our customers
• Leaves a low profile cut result, important for
solderability and connectivity
• Unique design with wide cutting range to suit an
unmatched variety of uses
Flush cut
• Cut result leaves a narrow and short peak along the
“pinch” line, decreasing the surface area at the cut
• Improves solderability
• Excellent for reducing lead-shock
Ultra-Flush® cut
• The finest cut result available with the smoothest
lead-end result
• Exceptional solderability
• Ultimate choice for minimizing component and
lead-shock
• Perfect for use in close tolerance electronic,
aerospace, defense and medical device
manufacturing
14
Cutter head shape
Oval
• The most common shape combining strength
and durability
• Evenly distributes cutting impact
Oval = O • Used for a wide variety of applications
Tapered
• The sides are shaped along diagonal lines
• Improved access where space is limited
• Improved maneuverability with good tool life
Tapered = T
Tapered and Relieved

• Tapered on both sides with underside cut away
• Minimal profile offers access to very limited
spaces
Tapered and Relieved = T&R
Angle
• Also known as an oblique cutter
• Used under and between low profile, fine lead
Angle = A pitch components
Tip
• Specialized adaption allows maximum access
and reach
• Extremely small oval head shape for added
Tip = TP
strength at the tip
Transverse End
• Cutting surfaces are perpendicular to the shank
• Allows straight-on approach to a lead
• An alternative to a diagonal cutter
Transverse End = ED
15
Cutters and pliers
PRECISION PLIERS BY LINDSTRÖM
Lindström precision Pliers for
demanding users
Pliers replicate the function of the human hand, with
greatly increased capability, in particular the thumb
and index finger, in terms of force and precision.
Holding pliers are available in almost unlimited

shapes, styles, configurations, materials and sizes.
Lindström’s well-renowned precision holding pliers are

offered in four different series, each able to satisfy the
most advanced needs of the professional user:
• RX Series
• Supreme Series
• HS Series
• EX Series
16
Robust yet precise, Lindström pliers
provide an excellent solution to a
wide range of application challenges.
A variety of handle styles, consistent
balance and fine workmanship set
our pliers apart from the rest.
RX Series pliers
Supreme Series pliers
HS Series pliers
EX Series pliers
17
Cutters and pliers
PRECISION PLIERS BY LINDSTRÖM
Pliers properties
Jaw surface or edge
Smooth surface
• Finely milled and polished just enough to retain grip on wire
Serrated surface
• Finely honed serrations allow extra “bite” for handling tricky
materials
• Top serrations cross bottom ones to prevent objects from
rolling into a groove
Super radiused edges

• Provides a gentle tight curve that tapers to follow the shape
of the jaw line
• Prevents nicking yet allows wire bends at a perfect 90°
• Standard edge for all EX jewelry pliers, available on request
for any Lindström pliers
Tip shape (end-on view)

Flat tip
• Squared and parallel ends of the jaws
• A balance of strength and beauty, evident of tool making
craftsmanship
Round tip
• Viewed end-on the tips are perfect circles
• Lindström’s precision screw joint is the reason these fine
tips achieve alignment
Round/Flat tip
• Like a tiny ball hammer and anvil, these tips are all business
Chain tip
• Designed to bend wire, these tips align like D-shaped
pinchers
18
Pliers head shape
Flat Nose
Flat nose • Flat square shape with parallel jaws
Flat nose provide the most surface area of
Flat Nose = FN
Flat nose standard pliers shapes
• Favored by chainmaille artists
Flat nose
Round nose
Round nose
Round Nose
Round nose • Round jaws taper from 7 mm to 1.0 mm
at the tips
Round Nose = RN
Flat nose
Round • Handy for closing loops and the finest
Round/Flat nose
wire work
Round/Flat nose
Flat nose
Flat nose
Round/Flat
Round/Flat Nose
Round nose
Round/Flat • A perfect combination of the above two types
Chain nose
Chain nose
• Handy for use in making fine curved wire
Round/Flat Nose = R/F
Round nose work
Round
Chain nose
Round/Flat
Chain nose
Chain Nose
Snipe nose
Snipe nose • Versatile tips with Lindström’s standard
Round/Flat nose
Round/Flat
perfect joint and tip alignment
Snipe nose Chain Nose = CN
• Named for the work it does so well
Chain
Snipe nose
Bent nose
Bent nose
Snipe Nose
Chain nose
Chain
Bent nose • Shorter version of the chain nose,
with the best gripping strength
Snipe Nose = SN
Snipe
• Used where power and torsion are
Bent nose
Needle nose paramount for the application
Needle nose
Snipe nose
Snipe nose
Needle
Bent Nose
Bent nose
Needle
• Classic variation of the chain nose,
with 60° bend at the tips
Bent Nose = BN
Bent nose • Suited for positioning components
Bent nose
or precise chain work
Needle nose
Needle Nose
Needle nose • Slimmer, more tapered version of
Needle nose
chain nose design
Needle Nose = NN
• Allows wire loop work farther into the jaws
for better grip and control
19
Cutters and pliers
PRODUCT SELECTION GUIDE Cutting capacity – Solid copper wire 2

Part Size Shape Cut Series and page reference Lead Gauge 38 24 18 15 12
no.1 result catcher Inch .004 .02 .039 .059 .079
or sur-
face mm 0.1 0.5 1.0 1.5 2.0
8130 XS O MB 24 42 56 *  1.25 mm
8131 XS O F 24 42 56 *  1.25 mm
8132 XS O UF 24 42 56 *  0.8 mm
8133 XS T MB 25 43 56 *  1.0 mm
CUTTERS
8134 XS T F 25 43 56 *  0.8 mm
8135 XS T UF 25 43 56 *  0.5 mm
8136 XS T&R MB 25 43 56 *  0.8 mm
8137 XS T&R F 25 43 56 *  0.8 mm
8138 XS T&R UF 25 43 56 *  0.5 mm
8140 S O MB 24 42 36 56 *  1.25 mm
8141 S O F 24 42 36 56 *  1.25 mm
8142 S O UF 24 42 56 *  1.0 mm
8143 S T MB 25 43 56 *  1.25 mm
8144 S T F 25 43 56 *  1.25 mm
8145 S T UF 25 43 56 *  1.0 mm
8146 S T&R MB 25 43 56 *  1.0 mm
8147 S T&R F 25 43 56 *  1.0 mm
8148 S T&R UF 25 43 56 *  0.8 mm
8149 S TP F 24 44 56 *  0.6 mm
8150 M O MB 24 42 36 56 *  1.6 mm
8151 M O F 24 42 36 56 *  1.6 mm
8152 M O UF 24 42 56 *  1.25 mm
8153 M T MB 25 43 56 *  1.6 mm
8154 M T F 25 43 56 *  1.6 mm
8155 M T UF 25 43 56 *  1.25 mm
8156 M T&R MB 25 43 56 *  1.25 mm
8157 M T&R F 25 43 56 *  1.25 mm
8158 M T&R UF 25 43 56 *  1.0 mm
8160 L O MB 24 42 56 *  2.0 mm
8161 L O F 24 42 57 *  2.0 mm
8162 L O UF 24 42 57 *  1.6 mm
8163 L T MB 25 43 57 *  2.0 mm
8164 L T F 25 43 57 *  2.0 mm
8165 L T UF 25 43 57 *  1.6 mm
8166 L T&R MB 25 43 57 *  1.5 mm
8167 L T&R F 25 43 57 *  1.5 mm
8168 L T&R UF 25 43 57 *  1.25 mm
8211 S A 20° F 26 44 57 *  1.2 mm
8233 XS T 10° F 27 0.6 mm
8234 XS T 10° F 27 0.4 mm
8237 XS A 50° F 27 0.5 mm
8247 S A 45° F 26 44 57 *  1.0 mm
8248 S A 45° F 26 45 57 *  0.8 mm
776 S T&R MB 36 1.25 mm
777 S T&R F 36 1.2 mm
7190 S T MB 48 57 *  1.0 mm
7191 S T F 48 57 *  1.0 mm
7280 S A F 48 57 * 0.8 mm
7285 S A F 49 57 * 1.0 mm
7290 S A MB 49 57 * 1.25 mm
7291 S A F 49 57 * 1.25 mm
7292 S ED F 50 57 * 0.8 mm
7293 S A F 49 57 * 1.0 mm
7450 S R/F SM 37
1. All part numbers come standard with
7490 S FN SM 28 50 37 57 * molded plastic handles and springs.
PLIERS
7590 S RN SM 28 51 38 57 * 2. Maximum cutting capacity listed.

7890 M CN SM 29 51 38 57 * Wire graphic shows full range.
7891 M CN SE 29 51 57 *
7892 M BN SM 29 52 57 * Tool manufactured to order. Please
* contact Lindström for more information.
7893 S SN SM 30 52 57 * See pp 58–59 for an LF Series overview.
7894 L NN SM 30 53 39 57 *
20
Cutters and pliers
PRODUCT OPTIONS
Size
XS Extra Small
S Small
For visuals of actual sizes of cutters and
pliers, please see Appendix on page 128.
M Medium
L Large
Shape.6
O Oval
T Tapered
Flat nose
Flat nose
T&R Tapered & Relieved
A Angle Flat nose Flat Nose = FN

Oval = O
TP Tip Flat nose
ED Transverse End Round nose

Round nose
FN Flat Nose
Round nose
RN Round Nose Flat nose
Round nose
Round Nose = RN
R/F Round/Flat Nose
Flat nose
Round/Flat
CN Chain Nose Round/Flat
Tapered = T nose
Flat nose
SN Snipe Nose Round/Flat nose
Round nose
Round/Flat nose
BN Bent Nose
NN Needle Nose Round

Chain nose
Chain nose Round/Flat Nose = R/F
Cut result or surface Round nose

Chain nose
MB Micro-Bevel®
Round/Flat nose
Chain
Tapered & nose
Relieved = T&R
F Flush
Round/Flat
Snipe nose
UF Ultra-Flush® Snipe nose
Micro-Bevel® = MB Round/Flat nose Chain Nose = CN
SM Smooth Tip Snipe nose
Chain
Snipe nose
SE Serrated Tip nose
Handle descriptions Chain

Bent nose
Bent nose
The ultimate in ergonomic Angle = A
Flush = F Chain nose
and ESD safe handles Bent nose
Traditional ESD safe Snipe nose
Bent nose Snipe Nose = SN
80 Series handles
Snipe nose
Needle
Traditional ESD safe Needle nose
Supreme Series handles Ultra-Flush® = UF Snipe nose
Needle nose
Compact ESD safe ergonomic
handles with non-slip grips Bent nose
Needle nose
Tip = TP
Original ESD safe ergonomic Bent nose Bent Nose = BN
handle design, soft foam grips
Smooth = SM
Lead free (Pb free) handles. For
Bent nose
more information see pages 58–59.
Needle nose
Lead catcher
Needle nose
Lead catcher. Add “-S”
 to part number.
Example: 8140-S
Serrated = SE Transverse End = ED
Needle nose Needle Nose = NN
21
RX cutters and pliers
INTRODUCTION RX SERIES
The ultimate in comfort,

performance and precision
We have put all of our experience, technical expertise and ergonomic
know-how into the successful RX Series. Take a close look at any RX
tool, try it out and then compare it to all competitors on the market.
Lindström RX Series will always come out on top! Easily adjustable
three-position
composite spring
provides variable
resistance and grip
width
Precision screw joint
minimizes friction
and maximizes Cushioned, high-
alignment of cutting friction surface.
edges Always comfortable
and steady in hand
Radiused edges
ensure safety and
minimize damage to
components
RX 8140
Developed using
Precision-ground Rounded shape the ERGO®
cutting edges for makes it easy to process to achieve
exceptionally rotate and to find a comfortable and
long life optimal working effective grip
position
22
Our scientific ERGO®
Development Program (the
“11-Point Program”) has resulted in many
successful and scientifically evaluated
ergonomic tools.
While many others just talk about

ergonomics, we deliver scientifically
Lightweight, easy validated solutions.
to maneuver and
position
All Lindström RX Series cutters

and pliers are ESD safe and safely
dissipate electrostatic charges,
reducing the possibility of damage to
sensitive components.
Warning! Lindström cutters and pliers

should never be used on electrified
equipment.
RX 8150 oval head cutter. Ideal for

cutting leads, jewelry wire, and gene-
ral assembly applications.
ESD safe handles
Unique spring design

provides extra-low
resistance when the
cut is made, reducing
fatigue
RX 7891 chain nose pliers. 32 mm jaw
length, serrated with radiused edges.
23
RX SERIES DIAGONAL CUTTERS
• Developed according to the ERGO® process for a • Precision screw joint that minimizes friction and maximizes
comfortable and effective grip in all situations alignment of cutting edges
• Material: High performance alloy steel • Biospring® reduces tension throughout the working cycle
• Precision induction hardened edges 63–65 HRC of the tool and can be adjusted in three different positions
• ESD safe handles in 2-component synthetic material • Cutting capacity is listed for solid copper wire
OVAL HEAD
D
RX 8130 – RX 8162 C F
B
Ideal for cutting leads,
jewelry wire, and general
A
assembly applications
Micro-Bevel® Flush Ultra-Flush®
Part no. EAN code A B C D F Capacity Bevel / Lead catcher Weight Pack qty
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result option grams
RX 8130 0103003 133.5 / 5.25 8.5 / 0.33 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Micro-Bevel®  68 10
RX 8131 0103010 133.5 / 5.25 8.5 / 0.33 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.1–1.25 / 0.01–0.05 Flush  68 10
RX 8132 0103027 133.5 / 5.25 8.5 / 0.33 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.1–0.8 / 0.01–0.03 Ultra-Flush ®
 68 10
RX 8140 0103034 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Micro-Bevel®  70 10
RX 8141 0103041 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.25 / 0.01–0.05 Flush  70 10
RX 8142 0103058 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Ultra-Flush ®
 70 10
RX 8150 0103133 138.0 / 5.43 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.3–1.6 / 0.01–0.06 Micro-Bevel®  73 10
RX 8151 0103140 138.0 / 5.43 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.6 / 0.01–0.06 Flush  73 10
RX 8152 0103157 138.0 / 5.43 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.25 / 0.01–0.05 Ultra-Flush®  73 10
RX 8160 0111534 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–2.0 / 0.02–0.08 Micro-Bevel ®
 97 10
RX 8161 0111541 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–2.0 / 0.01–0.08 Flush  97 10
RX 8162 0111558 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.6 / 0.01–0.06 Ultra-Flush ®
 97 10
H
C
D
TIP CUTTER E
RX 8149
G
B
Ideal for use on
multi-lead compo-
A
nents and rework
Flush
Part no. EAN code A B C D E G H Capacity Bevel / Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams
RX 8149 0103126 139.0 / 5.47 14.0 / 0.55 10.0 / 0.39 6.0 / 0.24 5.0 / 0.20 5.0 / 0.20 3.2 / 0.13 0.1–0.6 / 0.01–0.02 Flush 70 10
24
RX SERIES DIAGONAL CUTTERS
TAPERED HEAD D
C F
RX 8133 – RX 8165
B
Ideal for assembly work
where accessibility is a
A
consideration
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm /inch Cut result option grams
RX 8133
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.2–1.0 / 0.008–0.04 Micro-Bevel®  66 10
RX 8134
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.1–0.8 / 0.004–0.03 Flush  66 10
RX 8135
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.1–0.5 / 0.004–0.02 Ultra-Flush®  66 10
RX 8143 0103065 133.5 / 5.25 10.5 / 0.41 8.0 / 0.31 6.0 / 0.24 0.8 / 0.03 0.2–1.25 / 0.01-0.05 Micro-Bevel®  68 10
RX 8144 0103072 133.5 / 5.25 10.5 / 0.41 8.0 / 0.31 6.0 / 0.24 0.8 / 0.03 0.1–1.25 / 0.01-0.05 Flush  68 10
RX 8145 0103089 133.5 / 5.25 10.5 / 0.41 8.0 / 0.31 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Ultra-Flush®  68 10
RX 8153
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.3–1.6 / 0.01–0.06 Micro-Bevel®  71 10
RX 8154
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.6 / 0.01–0.06 Flush  71 10
RX 8155
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.25 / 0.01–0.05 Ultra-Flush®  71 10
RX 8163
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–2.0 / 0.02–0.08 Micro-Bevel®  95 10
RX 8164
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–2.0 / 0.01–0.08 Flush  95 10
RX 8165
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.6 / 0.01–0.06 Ultra-Flush®  95 10
* Tool manufactured to order. Please contact Lindström for more information.
TAPERED AND RELIEVED HEAD D

C F
RX 8136 – RX 8168
B
Ideal for use in
confined spaces
A
and for rework
RX 8136
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.1–0.8 / 0.004–0.03 Micro-Bevel®  66 10
RX 8137
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.1–0.8 / 0.004–0.03 Flush  66 10
RX 8138
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.8 / 0.03 0.1–0.5 / 0.004–0.02 Ultra-Flush®  66 10
RX 8146 0103096 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.0 / 0.01–0.04 Micro-Bevel®  68 10
RX 8147 0103102 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Flush  68 10
RX 8148 0103119 135.5 / 5.33 10.5 / 0.41 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–0.8 / 0.01–0.03 Ultra-Flush®  68 10
RX 8156
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.3–1.25 / 0.01–0.05 Micro-Bevel®  70 10
RX 8157
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.25 / 0.01–0.05 Flush  70 10
RX 8158
* 138.0 / 5.3 13.0 / 0.51 12.5 / 0.49 6.0 / 0.24 1.2 / 0.05 0.2–1.0 / 0.01–0.04 Ultra-Flush®  70 10
RX 8166
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–1.5 / 0.02–0.06 Micro-Bevel®  94 10
RX 8167
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.5 / 0.01–0.06 Flush  94 10
RX 8168
* 147.0 / 5.8 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.25 / 0.01–0.05 Ultra-Flush®  94 10
25
RX SERIES OBLIQUE CUTTERS
20° SHORT HEAD D

C
RX 8211 G
B
Ideal for rework and 20o
close assembly needs

A
Flush
Part no. EAN code A B C D G Capacity Bevel / Lead catcher Weight Pack qty
RX 8211 0103188 134.5 / 5.29 9.5 / 0.37 10.0 / 0.39 6.0 / 0.24 4.1 / 0.16 0.2–1.2 / 0.01–0.05 Flush  70 10
C D
45° LONG HEAD G
RX 8247
B
45o
Ideal for rework and
A
Flush
RX 8247 0103164 143.0 / 5.63 18 / 0.71 10.0 / 0.39 6.0 / 0.24 6.7 / 0.26 0.2–1.0 / 0.01–0.04 Flush  72 10
C D
45° LONG HEAD G
RX 8248
B
45o
A
Flush
RX 8248 0103171 143.0 / 5.63 18 / 0.71 10 / 0.39 6 / 0.24 6.7 / 0.26 0.2–0.8 / 0.01–0.03 Flush  72 10
26
RX SERIES MICRO TIP CUTTERS
• ESD safe handles in 2-component synthetic material RX8234 • Cutting capacity is listed for solid copper wire
C D
10° MICRO TIP G
RX 8233
B

close fine pitch
A
applications 10o
Flush
Part no. EAN code A B C D G Capacity Bevel / Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams
RX 8233 0113521 149.0 / 5.9 22.3 / 0.87 10.6 / 0.41 7.0 / 0.27 7.2 / 0.28 0.1–0.6 / 0.004–0.024 Flush 69 1
RX8233
D
10° MICRO TIP
C
RX 8234
B
close fine pitch A
10o
applications
Flush

RX 8234 0113538 141.0 / 4.5 14.2 / 0.56 10.6 / 0.41 7.0 / 0.27 3.2 / 0.12 0.05–0.4 / 0.002–0.018 Flush 62 1
C D
50° MICRO TIP
G
RX 8237
B
Ideal for rework and 50o

close fine pitch
A
applications
Flush

RX 8237 0113545 144.0 / 5.6 17.4 / 0.69 10.6 / 0.41 7.0 / 0.27 4.1 / 0.16 0.1–0.5 / 0.004–0.02 Flush 65 1
27
RX SERIES FLAT NOSE PLIERS
• Developed according to the ERGO® process for a • ESD safe handles in 2-component synthetic material
comfortable and effective grip in all situations • Micro-Touch™: The shape of the handles makes it possible
• Material: High performance alloy steel to control and rotate the pliers between thumb and index
• Polished and tough hardened 55-58 HRC finger for precision work
• Precision screw joint that minimizes friction and • Biospring® reduces tension throughout the working cycle
maximizes jaw alignment of the tool and can be adjusted in three different positions
C D
E F
FLAT NOSE
RX 7490 B
Smooth gripping
jaws with
A
radiused edges
Smooth Flat tip
Part no. EAN code A B C D E F Jaw Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch surface grams
RX 7490 0103195 146.5 / 5.77 20.0 / 0.79 9.0 / 0.35 6.7 / 0.26 1.2 / 0.05 3.2 / 0.12 Smooth 70 10
RX SERIES ROUND NOSE PLIERS
C D
E F
ROUND NOSE
RX 7590 B
Round nose,
fine jaws with no
A
sharp edges
Smooth Round tip

RX 7590 0103201 146.5 / 5.77 20.0 / 0.79 9.0 / 0.35 6.7 / 0.26 1.4 / 0.055 0.7 / 0.027 Smooth 69 10
28
RX SERIES CHAIN NOSE PLIERS
C D
E F
CHAIN NOSE
RX 7890, RX 7891 B
RX 7890 with
smooth jaws,
radiused edges
RX 7891 with A
serrated jaws Smooth Serrated Chain tip

RX 7890 0103218 158.5 / 6.24 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 72 10
RX 7891 0103225 158.5 / 6.24 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Serrated 72 10
RX SERIES BENT NOSE PLIERS
C
60o
BENT NOSE E F
RX 7892 B
Smooth jaws
and bent tip D
angled at 60°,
A
radiused edges
Smooth Chain tip

RX 7892 0103232 155.5 / 6.12 29.0 / 1.14 9.0 / 0.35 6.7 / 0.26 1.2 / 0.05 0.8 / 0.03 Smooth 73 10
29
RX SERIES SNIPE NOSE PLIERS
C D
SNIPE NOSE E F
RX 7893
B
Smooth jaws
with radiused
A
edges
Smooth Chain tip

RX 7893 0103249 146.5 / 5.77 20.0 / 0.79 9.0 / 0.35 6.7 / 0.26 1.2 / 0.05 0.8 / 0.03 Smooth 71 10
RX SERIES NEEDLE NOSE PLIERS
C D
E F
NEEDLE NOSE
RX 7894 B
Smooth jaws
A
with radiused
edges Smooth Chain tip

RX 7894 0212101 158.5 / 6.24 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 70 10
30
RX cutters and pliers / Miscellaneous cutters
RX SERIES HEAVY DUTY CUTTER
• Non-slip handle with “gills” produces a positive grip • Rivet joint that minimizes friction and maximizes jaw
• Progressive Bevel cutting edges – suited for copper wire alignment
at the tip and hard steel wire near the jaws – for versatile • Cutting edges hardened to 63–65 HRC for durable
operation performance
• Tough design makes this cutter ideal for production, • High leverage joint to reduce cutting force
maintenance, repair and service applications • On/off spring enables reduced profile for easy storage
C D
HEAVY DUTY
TRX 8180 B
Progressive
Bevel technology A
for both soft
and hard wire
applications Progressive
Bevel
Part no. EAN code A B C D Capacity Cu Capacity Fe+ Capacity Piano Bevel / Weight Pack
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams qty
TRX 8180 0112272 210.0 / 8.26 21.0 / 0.826 29.0 / 1.141 11.0 / 0.433 4.5 / 0.177 3.0 / 0.118 2.5 / 0.10 Progressive Bevel 304 10
MULTIPURPOSE SHEAR
• User-friendly, durable and fits comfortably in either hand • Precision screw joint that minimizes friction and maximizes
• High carbon steel blades with a hardness of 57–59 HRC alignment of cutting edges
• Serrations on one edge to prevent the material being cut • ESD safe non-slip, cushioned grips
from sliding away (HS6000) • Ideal for cutting insulation, cables, ties and corded material
of all types
C D
MULTIPURPOSE SHEAR
HS6000, HS6001 B
HS6000 with
serrated jaws
A
HS6001 with
smooth jaws Smooth Serrated
Part no. EAN code A B C D Jaw Weight Pack qty

731415 mm / inch mm / inch mm / inch mm / inch surface grams
HS6000 01113781 145.0 / 5.7 29.0 / 1.1 12.7 / 0.5 6.4 / 0.2 Serrated 88 10
HS6001
* 145.0 / 5.7 29.0 / 1.1 12.7 / 0.5 6.4 / 0.2 Smooth 88 10
31
Miscellaneous cutters
ESD SAFE PLASTIC CUTTER
• Oval relieved cutting head for applications where access is • Developed according to the ERGO® process for a
limited comfortable and effective grip in all situations
• Extremely strong construction for long lasting performance • Rivet joint that minimizes friction and maximizes jaw
• Designed to produce a Flush result on plastic, nylon and alignment
cabled wire applications • ESD safe handles in 2-component synthetic material
• On/off spring enables reduced profile or easy storage
C D
PLASTIC
P6160
B
For plastic,
solid and
braided A
copper wire
applications
Flush
Part no. EAN code A B C D Capacity Capacity Bevel / Weight Pack qty
731415+ mm / inch mm / inch mm / inch mm / inch solid copper insulated cable Cut result grams
mm / inch mm /inch
P6160 1150755 160.0 / 6.3 18.0 / 0.7 21.5 / 0.85 10.0 / 0.39 1.5 / 0.059 3.0 / 0.118 Flush 162 10
The ESD safe plastic cutter P6160 leaves a Flush cut on plastic and nylon parts.
32
INTRODUCTION EX SERIES
EX Series
Cutters
and Pliers
33
EX cutters and pliers
INTRODUCTION EX SERIES
High precision EX Series

Cutters and Pliers
Our Swiss-made EX Series cutters and pliers are outstanding tools for
bead and wire artists and electronics assembly. EX pliers feature jaws
designed for smooth nick-free wire bending.
Lap joint with screw

to achieve a high
level of strength and
precision
High quality steel

provides strength
Dual steel
and durability
leaf springs
34
Wide, ergonomic handles distribute hand pressure All Lindström EX Series cutters
evenly. High-friction grips allow precise handling dissipate electrostatic charges,
and maximum comfort. Induction hardened, high- reducing the possibility of damage to
chromium steel alloy and special precision screw sensitive components.
joint offer precision alignment and extended tool life. Warning! Lindström cutters and pliers
equipment.
Soft comfortable
gripping surface with
hard plastic core
for a sure grip and
smooth operation
EX 8150 diagonal cutter with oval

head. Perfect for cutting leads,
jewelry wire, and general assembly
applications.
EX 7890 long chain nose pliers with

All EX Series smooth jaws.
cutters and pliers
are ESD safe for
use in sensitive
environments.
High-tactile two-
component rounded
ergonomic handles
35
EX SERIES DIAGONAL CUTTERS
• Material: High performance alloy steel • ESD safe 2-component handles with soft comfortable
• Polished and tough hardened 63–65 HRC gripping surface and hard plastic core
• Precision screw joint that minimizes friction and • Dual leaf springs in stainless steel
maximizes alignment of cutting edges • Cutting capacity is listed for solid copper wire
OVAL HEAD
EX 8140, EX 8141, EX 8150, EX 8151 C
D
Ideal for cutting B
leads, jewelry wire,

and general assem- A
bly applications Micro-Bevel® Flush
Part no. EAN code A B C D Capacity Bevel / Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams qty
EX 8140 0120003 123.0 / 4.825 10.0 / 0.393 10.0 / 0.393 6.4 / 0.252 0.2–1.25 / 0.008–0.049 Micro-Bevel® 76 10
EX 8141 0120004 123.0 / 4.825 10.0 / 0.393 10.0 / 0.393 6.4 / 0.252 0.1–1.2 / 0.004–0.047 Flush 76 10
EX 8150 0120006 125.0 / 4.921 12.5 / 0.492 12.5 / 0.492 6.4 / 0.252 0.3–1.6 / 0.011–0.062 Micro-Bevel® 76 10
EX 8151 0120007 125.0 / 4.921 12.5 / 0.492 12.5 / 0.492 6.4 / 0.252 0.2–1.6 / 0.008–0.062 Flush 76 10
TAPERED AND RELIEVED HEAD

EX 776, EX 777 C
D
Ideal for use in B
confined spaces
and for rework A
Micro-Bevel® Flush
Part no. EAN code A B C D Capacity Bevel / Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams qty
EX 776 0120013 123.0 / 4.825 10.0 / 0.393 10.0 / 0.393 6.4 / 0.251 0.2–1.25 / 0.008–0.049 Micro-Bevel® 75 10
EX 777 0109661 123.0 / 4.825 10.0 / 0.393 10.0 / 0.393 6.4 / 0.251 0.1–1.2 / 0.004–0.047 Flush 75 10
36
EX SERIES ROUND/FLAT NOSE PLIERS
maximizes jaw alignment • EX Series pliers have super-radiused edges to keep pliers
from nicking jewelry metals
C D
ROUND/FLAT NOSE E F
EX 7450
B
Smooth gripping
jaws with super-
radiused edges A
Smooth Super-radiused Round/Flat tip
Part no. EAN code A B C D E F Jaw Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch surface grams qty
EX 7450 0120019 133.0 / 5.236 20.0 / 0.787 10.0 / 0.393 6.4 / 0.251 1.2 / 0.047 4.0 / 0.157 Smooth 76 10
EX SERIES FLAT NOSE PLIERS
C D
FLAT NOSE E F
EX 7490
B
Smooth gripping
jaws with super-
radiused edges A
Smooth Super-radiused Flat tip

EX 7490 0120014 133.0 / 5.236 20.0 / 0.787 10.0 / 0.393 6.4 / 0.251 1.2 / 0.047 4.0 / 0.157 Smooth 76 10
37
EX SERIES ROUND NOSE PLIERS
C D
ROUND NOSE E F
EX 7590
B
Round nose,
fine jaws with
no sharp edges A
Smooth Round tip

EX 7590 0109678 133.0 / 5.236 20.0 / 0.787 10.0 / 0.393 6.4 / 0.251 2.0 / 0.078 1.0 / 0.039 Smooth 76 10
EX SERIES CHAIN NOSE PLIERS
C D
CHAIN NOSE E F
EX 7890
B
Smooth Chain tip

EX 7890 0120016 143.0 / 5.866 30.0 / 1.181 10.0 / 0.393 6.4 / 0.251 1.2 / 0.047 1.0 / 0.039 Smooth 76 10
38
EX SERIES NEEDLE NOSE PLIERS
C D
NEEDLE NOSE E F
EX 7894
B
Smooth Chain tip

EX 7894 0120017 143.0 / 5.866 30.0 / 1.181 10.0 / 0.393 6.4 / 0.251 1.2 / 0.047 1.0 / 0.039 Smooth 76 10
39
80 series cutters
INTRODUCTION 80 SERIES
The original Lindström

80 Series Cutters
Tried and true performance for the traditional user. The Lindström 80 Series
remains the top choice for the traditional user. This range of cutters offers
unsurpassed cutting capacity covering a wide range of wire dimensions and
types. This is the technology that “started it all” for Lindström.
Precision induction
hardened allowing a
Rockwell hardness
of 63–65 HRC
Precision screw joint
minimizes friction and
maximizes alignment
of cutting edges
Precision-ground
cutting edges for Non-slip textured
exceptionally handles are
long life equipped with
leaf springs
40
Perfectly sized grips allow precise handling and All Lindström 80 Series cutters
are ESD safe and safely dissipate
effortless comfort. Induction hardened, high- electrostatic charges, reducing
chromium steel alloy and precision screw joint offer the possibility of damage to sensitive
excellent alignment and extended tool life. components.

equipment.
Durable, easily
replaceable, dual
steel leaf springs
8140 oval head cutter, ideal for wire

harness work and standard printed
circuit board assembly.
All 80 Series
cutters are
ESD safe
8144 tapered head cutter, ideal for

assembly work where accessibility is a
consideration.
41
80 series cutters
80 SERIES DIAGONAL CUTTERS
• Material: High performance alloy steel • Precision screw joint that minimizes friction and
• Exacting induction hardened edges 63–65 HRC maximizes alignment of cutting edges
• ESD safe handles in synthetic material with leaf springs • Cutting capacity is listed for solid copper wire
OVAL HEAD D
C F
8130 – 8162
Ideal for wire harness B
work and standard

printed circuit board A
assembly
8130 0050918 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Micro-Bevel®  43 10
8131 0050925 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.1–1.25 / 0.01–0.05 Flush  43 10
8132 0050932 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20 0.8 / 0.03 0.1–0.8 / 0.01–0.03 Ultra-Flush®  44 10
8140 0050949 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Micro-Bevel ®
 46 10
8141 0050987 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.25 / 0.01–0.05 Flush  45 10
8142 0051007 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Ultra-Flush ®
 46 10
8150 0051113 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.3–1.6 / 0.01–0.06 Micro-Bevel ®
 50 10
8151 0051199 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.2–1.6 / 0.01–0.06 Flush  49 10
8152 0052097 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.1–1.25 / 0.01–0.05 Ultra-Flush ®
 49 10
8160 0051229 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–2.0 / 0.02–0.08 Micro-Bevel®  88 10
8161 0051328 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–2.0 / 0.01–0.08 Flush  88 10
8162 0051335 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.6 / 0.01–0.06 Ultra-Flush®  88 10
Flush cutters are identified by a circle on the handle, as seen here on 80 Series cutters. Double circles indicate Ultra-Flush®
cutters. On RX Series cutters, the circle icons are located inside the end of the handles.
42
80 series cutters
80 SERIES DIAGONAL CUTTERS
TAPERED HEAD C
D
F
8133 – 8165 B
Ideal for assem-
bly work where A
accessibility is a
consideration Micro-Bevel® Flush Ultra-Flush®
8133
* 108.0 / 4.25 8.0 / 0.31 8.0 / 031 5.0 / 0.2 0.6 / 0.02 0.2–1.0 / 0.008–0.04 Micro-Bevel®  43 10
8134
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.6 / 0.02 0.1–0.8 / 0.004–0.03 Flush  43 10
8135
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.6 / 0.02 0.1–0.5 / 0.004–0.02 Ultra-Flush®  43 10
8143 0051021 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Micro-Bevel®  46 10
8144 0051045 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.25 / 0.01–0.05 Flush  46 10
8145 0051052 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Ultra-Flush®  46 10
8153 0051205 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.3–1.6 / 0.01–0.06 Micro-Bevel®  49 10
8154 0052103 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.2–1.6 / 0.01–0.06 Flush  49 10
8155 0052110 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.2–1.25 / 0.01–0.05 Ultra-Flush®  49 10
8163 0051342 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–2.0 / 0.02–0.08 Micro-Bevel®  88 10
8164 0052141 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–2.0 / 0.01–0.08 Flush  88 10
8165 0052158 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.6 / 0.01–0.06 Ultra-Flush®  88 10
TAPERED AND RELIEVED HEAD C

D
F
8136 – 8168
B
Ideal for use in
confined spaces
A
and for rework
8136
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.6 / 0.02 0.1–0.8 / 0.004–0.03 Micro-Bevel®  43 10
8137
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.6 / 0.02 0.1–0.8 / 0.004–0.03 Flush  43 10
8138
* 108.0 / 4.25 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2 0.6 / 0.02 0.1–0.5 / 0.004–0.02 Ultra-Flush®  43 10
8146 0051076 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.2–1.0 / 0.01–0.04 Micro-Bevel®  46 10
8147 0051083 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–1.0 / 0.01–0.04 Flush  46 10
8148 0051090 110.0 / 4.33 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24 0.8 / 0.03 0.1–0.8 / 0.01–0.03 Ultra-Flush®  45 10
8156 0051212 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.3–1.25 / 0.01–0.05 Micro-Bevel®  49 10
8157 0052127 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.2–1.25 / 0.01–0.05 Flush  49 10
8158 0052134 112.5 / 4.43 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24 1.2 / 0.05 0.2–1.0 / 0.01–0.04 Ultra-Flush®  49 10
8166
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.4–1.5 / 0.02–0.06 Micro-Bevel®  52 10
8167
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.5 / 0.01–0.06 Flush  52 10
8168
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31 1.6 / 0.06 0.3–1.25 / 0.01–0.05 Ultra-Flush®  51 10
43
80 series cutters
80 SERIES OBLIQUE CUTTERS
TIP CUTTER C
D
E
8149
Ideal for use G
with multi-lead B
components
and for rework A
Flush
Part no. EAN code A B C D E G H Capacity Bevel / Lead catcher Weight Pack
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result option grams qty
8149 0051106 114.0 / 4.49 14.0 / 0.55 5.0 / 0.23 6.0 / 0.24 5.0 / 0.23 5.0 / 0.23 3.2 / 0.13 0.1–0.6 / 0.01–0.02 Flush  48 10
D
C
20° ANGLE HEAD G
8211
B
Short opposing jaws 20o
make this oblique
cutter powerful and A
versatile
Flush
8211 0101030 110.0 / 4.33 9.5 / 0.37 10.0 / 0.39 6.0 / 0.24 4.1 / 0.16 0.2–1.2 / 0.01–0.05 Flush  43 10
C D
45° TAPERED HEAD G
8247
B
Ideal for rework 45o
and close assem-

bly needs A
Flush
8247 0051397 117.5 / 4.63 18.0 / 0.71 10.0 / 0.39 6.0 / 0.24 6.7 / 0.26 0.2–1.0 / 0.01–0.04 Flush  51 10
44
80 series cutters
80 SERIES OBLIQUE CUTTERS
C D
45° LONG TAPERED & RELIEVED HEAD G
8248
Long reach and B
45o
relieved tips
for unmatched
A
accessibility
Flush
8248 0051427 117.5 / 4.63 18.0 / 0.71 10.0 / 0.39 6.0 / 0.24 6.7 / 0.26 0.2–0.8 / 0.01–0.03 Flush  51 10
Stents can be trimmed with Lindström 8130 cutters.
45
Supreme cutters and pliers
INTRODUCTION SUPREME SERIES
Lindström Supreme Series

for dependable results
Traditional Lindström Supreme cutters and pliers provide great performance
in applications like general electronics assembly, fine mechanical work and
precise wire bending.
The Supreme Series features a precision screw & nut in an advanced lap joint
design. Joint play is held to a minimum, ensuring precise alignment of the jaws
even at the tips. Supreme Series oblique end cutters are preferred by jewelry
and wire artists, while transverse cutters are uniquely suited to trimming leads
in hard-to-reach assemblies.
Precision screw
joint minimizes
friction and
maximizes
alignment of jaws
High performance
alloy steel
Joint movement is Replaceable springs

held to a minimum, help reduce down
ensuring precise time and stocking
alignment of the substitute tools
jaws, even at the tip
46
All Lindström Supreme Series
cutters and pliers are ESD safe
and safely dissipate electrostatic
charges, reducing the possibility of
damage to sensitive components.

All Supreme equipment.
products
have ESD
safe handles
Double-leaf
springs for
quick opening
7292 Supreme miniature end cutter

is ideal for use in confined spaces.
Non-slip textured
handles provide
a natural fit for
comfortable control
7590 Supreme round nose pliers with

no sharp edges.
47
SUPREME SERIES DIAGONAL CUTTERS
• Material: High performance alloy steel • ESD safe handles in synthetic material with leaf springs
• Polished and precision induction hardened to 63–65 HRC • Cutting capacity is listed for solid copper wire
• Precision screw joint that minimizes friction and maximizes
alignment of cutting edges
TAPERED HEAD D
C F
7190, 7191
B
Ideal for assembly
work where access is
A
a consideration
Micro-Bevel® Flush
7190 0052479 109.0 / 4.29 9.0 / 0.35 9.0 / 0.35 6.0 / 0.24 1.0 / 0.04 0.2–1.0 / 0.01–0.05 Micro-Bevel®  50 10
7191 0052509 109.0 / 4.29 9.0 / 0.35 9.0 / 0.35 6.0 / 0.24 1.0 / 0.04 0.1–1.0 / 0.01–0.05 Flush  50 10
SUPREME SERIES OBLIQUE CUTTERS
REVERSE ANGLE C D
7280
B
45o
Ideal for use in G
confined spaces
A
Flush

7280 0052523 118.0 / 4.64 18.0 / 0.71 9.0 / 0.35 6.0 / 0.24 3.5 / 0.14 0.2–0.8 / 0.01–0.03 Flush 54 10
48
SUPREME SERIES OBLIQUE CUTTERS
ANGLE
C D
7285 G
Ideal for rework and B

45o

A
Flush

7285 0052530 120.0 / 4.72 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 6.0 / 0.26 0.2–1.0 / 0.01–0.04 Flush 56 10
END
7290, 7291 C G
B 11o
Angled shape ideal for
use in confined spaces
A
Micro-Bevel® Flush
Part no. EAN code A B C G Capacity Bevel / Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams
7290 0052547 108.0 / 4.25 8.0 / 0.31 10.5 / 0.41 15.0 / 0.59 0.35–1.25 / 0.01–0.05 Micro-Bevel® 56 10
7291 0052554 108.0 / 4.25 8.0 / 0.31 10.5 / 0.41 15.0 / 0.59 0.35–1.25 / 0.01–0.05 Flush 56 10
END
7293 C G
B 11o
Angled shape ideal for
use in confined spaces
A
Flush
Part no. EAN code A B C G Capacity Bevel / Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams
7293 0052592 108.0 / 4.25 8.0 / 0.31 10.5 / 0.41 8.0 / 0.31 0.35–1.0 / 0.01–0.04 Flush 56 10
49
SUPREME SERIES MINIATURE END CUTTERS
• Polished and induction hardened to 58–60 HRC • Cutting capacity is listed for solid copper wire
C D
END E F
7292
B
Miniature head ideal

for use in confined A
spaces
Flush
Part no. EAN code A B C D E F Capacity Bevel / Weight Pack qty

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch Cut result grams
7292 0052578 115.0 / 4.53 15.0 / 0.59 9.0 / 0.35 6.0 / 0.24 3.2 / 0.13 4.0 / 0.16 0.35-0.8 / 0.01–0.03 Flush 54 10
SUPREME SERIES FLAT NOSE PLIERS
• Polished and induction hardened to 58–60 HRC
jaw alignment
C D
FLAT NOSE E F
7490
B
Smooth gripping
jaws with radiused
edges A
Smooth Flat tip

7490 0052646 120.0 / 4.72 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 3.2 / 0.13 Smooth 53 10
50
SUPREME SERIES ROUND NOSE PLIERS
• Polished and induction hardened to 58–60 HRC
jaw alignment
ROUND NOSE C D
F
E
7590
B
Round jaws with

no sharp edges
A
Smooth Round tip

7590 0052660 120.0 / 4.72 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.4 / 0.055 0.7 / 0.027 Smooth 54 10
SUPREME SERIES CHAIN NOSE PLIERS
• Polished and induction hardened to 58–60 HRC • 32 mm jaws with radiused edges
jaw alignment
CHAIN NOSE C
F
D
E
7890, 7891
B
7890 with
smooth jaws,
7891 with
A
serrated jaws Smooth Serrated Chain tip

7890 0052691 132.0 / 5.20 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 60 10
7891 0052714 132.0 / 5.20 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Serrated 59 10
51
SUPREME SERIES BENT NOSE PLIERS
• Polished and hardened to 58–60 HRC
jaw alignment
C
BENT NOSE 60
o
E F
7892 B
Smooth jaws
D
bent at 60° with
radiused edges A
Smooth Chain tip

7892 0052738 129.0 / 5.08 29.0 / 1.14 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 59 10
SUPREME SERIES SNIPE NOSE PLIERS
• Material: High performance alloy steel • ESD safe handles in synthetic material with return spring
• Polished and hardened to 58–60 HRC
jaw alignment
C D
SNIPE NOSE E F
7893
B
Smooth jaws with

radiused edges
A
Smooth Chain tip

7893 0052769 120.0 / 4.72 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 56 10
52
SUPREME SERIES NEEDLE NOSE PLIERS
• Material: High performance alloy steel • ESD safe handles in synthetic material with return spring
• Polished and hardened to 58–60 HRC • 32 mm jaws with radiused edges
jaw alignment
NEEDLE NOSE C
F
D
E
7894
B
Slim long jaws for
fine wire work
Smooth Chain tip

7894 0197484 132.0 / 5.20 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Smooth 56 10
53
HS cutters and pliers
INTRODUCTION HS SERIES
The original
ergonomic handtools
In the 1980s one of the pioneers of telecommunications asked us to modify
some pliers and cutters. Lindström worked with the customer to develop
handles that were longer, softer to the touch and provided more surface area
to grip and manipulate the tools. Longer handles had the benefits of avoiding
the nerve bundle that passes through the palm of the hand and adding more
stability to the tools. The customer loved them! Howard Gittleson, a pioneer of
ergonomic handtool research, dubbed this new design HandSaver, which we
continue to produce today as the HS handle option.
HS pliers and
cutters use same
leaf springs as 80
Series & Supreme
Series tools
HS Series cutters
and pliers are built
around the precise
80 Series precision
screw joint
The “business
end” is the same
as standard 80 ESD safe grips
Series cutters or form the first
Supreme Series layer of the HS
pliers handle system
54
HS handles can be added to any 80 Series or Supreme All Lindström HS Series cutters
Series cutter or pliers. Continued research by Lindström dissipate electrostatic charges,
into ergonomic principals, after partnering with a design reducing the possibility of damage to
firm in Sweden and ergonomic experts at the University sensitive components.
of Michigan, eventually led to the RX Series design. Warning! Lindström cutters and pliers
But it all started with HandSaver handles, which are still should never be used on electrified
equipment.
very popular and still available today to customers who
specify them.
HS 8140 small, oval head

Micro-Bevel® cutter.
Soft foam outer

grips provide ESD-
safe, highly tactile
surface
HS 8211 oblique cutter with

Flush bevel.
HS 7890 chain nose,

smooth jaw pliers.
Overall handle
length is increased
by more than
30 mm (1.27") to
avoid pressure
points in palm
HS 7893 short snipe nose,

smooth jaw pliers.
55
HS SERIES CUTTERS
• Long, foam covered handles provide added leverage, an • All HS cutters and pliers are ESD safe, using static
ergonomic grip, and reduced fatigue dissipative foam grips over conductive spring holders
• HS handle option can be applied to any standard • Contact Lindström for additional options
80 Series cutters or Supreme Series cutters and pliers
HS SERIES CUTTERS C C C
H H H
D D D
E D E D E D
C C C F F F
G G G
B B B
B B B
A A A A A A
Part no. EAN code A B C D E F G H Capacity Head Bevel / Lead Weight Pack
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch shape Cut catcher grams qty
** result option
***
HS 8130 0107773 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20
**** 0.8 / 0.03
**** **** 0.2–1.25 / 0.01–0.05 O MB  91 10
HS 8131 0107803 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20
**** 0.8 / 0.03
**** **** 0.1–1.25 / 0.01–0.05 O F  91 10
HS 8132 0107810 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.20
**** 0.8 / 0.03
**** **** 0.1–0.8 / 0.01–0.03 O UF  91 10
HS 8133
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.2–1.0 / 0.008–0.04 T MB  91 10
HS 8134
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.1–0.8 / 0.004–0.03 T F  91 10
HS 8135
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.1–0.5 / 0.004–0.02 T UF  91 10
HS 8136
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.1–0.8 / 0.004–0.03 T&R MB  90 10
HS 8137
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.1–0.8 / 0.004–0.03 T&R F  90 10
HS 8138
* 140.3 / 5.52 8.0 / 0.31 8.0 / 0.31 5.0 / 0.2
**** 0.8 / 0.03
**** **** 0.1–0.5 / 0.004–0.02 T&R UF  90 10
HS 8140 0107926 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.2–1.25 / 0.01–0.05 O MB  92 10
HS 8141 0107940 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.1–1.25 / 0.01–0.05 O F  92 10
HS 8142 0107964 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.1–1.0 / 0.01–0.04 O UF  92 10
HS 8143 0107988 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.2–1.25 / 0.01–0.05 T MB  91 10
HS 8144 0108008 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.2–1.25 / 0.01–0.05 T F  91 10
HS 8145 0108002 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.1–1.0 / 0.01–0.04 T UF  91 10
HS 8146 9954701 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.2–1.0 / 0.01–0.04 T&R MB  91 10
HS 8147 9955777 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.1–1.0 / 0.01–0.04 T&R F  91 10
HS 8148 0108084 142.3 / 5.60 10.0 / 0.39 10.0 / 0.39 6.0 / 0.24
**** 0.8 / 0.03
**** **** 0.1–0.8 / 0.01–0.03 T&R UF  90 10
HS 8149 9953650 146.3 / 5.76 14.0 / 0.55 5.0 / 0.23 6.0 / 0.24 5.0 / 0.23
**** 5.0 / 0.23 3.2 / 0.13 0.1–0.6 / 0.01–0.02 TP F  90 10
HS 8150 0108114 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.3–1.6 / 0.01–0.06 O MB  98 10
HS 8151 9953643 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.2–1.6 / 0.01–0.06 O F  98 10
HS 8152 9954695 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.1–1.25 / 0.01–0.05 O UF  97 10
HS 8153 9953414 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.3–1.6 / 0.01–0.06 T MB  97 10
HS 8154 9953735 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.2–1.6 / 0.01–0.06 T F  97 10
HS 8155 9973511 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.2 / 0.05
**** **** 0.2–1.25 / 0.01–0.05 T UF  97 10
HS 8156
* 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.0 / 0.04
**** **** 0.3–1.25 / 0.01–0.05 T&R MB  97 10
HS 8157 9949264 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.0 / 0.04
**** **** 0.2–1.25 / 0.01–0.05 T&R F  97 10
HS 8158 9949271 144.8 / 5.70 12.5 / 0.50 12.5 / 0.50 6.0 / 0.24
**** 1.0 / 0.04
**** **** 0.2–1.0 / 0.01–0.04 T&R UF  97 10
HS 8160 0108305 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** **** 0.4–2.0 / 0.02–0.08 O MB  136 10

** O = Oval. T = Tapered. T&R = Tapered & Relieved. A = Angle. TP = Tip. ED = Transverse End.
*** MB = Micro-Bevel®. F = Flush. UF = Ultra-Flush®.
**** Signifies dimensional data is not applicable to this specific tool.
56
HS SERIES CUTTERS (CONTINUED)
Part no. EAN code A B C D E F G Capacity Head Bevel / Lead Weight Pack
731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch shape Cut catcher grams qty
** result option
***
HS 8161 0108329 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–2.0 / 0.01–0.08 O F  136 10
HS 8162 0108343 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–1.6 / 0.01–0.06 O UF  136 10
HS 8163 0108367 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.4–2.0 / 0.02–0.08 T MB  136 10
HS 8164 0108381 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–2.0 / 0.01–0.08 T F  136 10
HS 8165 0108404 157.3 / 6.19 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–1.6 / 0.01–0.06 T UF  136 10
HS 8166
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.4–1.5 / 0.02–0.06 T&R MB  139 10
HS 8167
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–1.5 / 0.01–0.06 T&R F  139 10
HS 8168
* 125.0 / 4.92 16.0 / 0.63 16.0 / 0.63 8.0 / 0.31
**** 1.6 / 0.06
**** 0.3–1.25 / 0.01–0.05 T&R UF  139 10
HS 8211 9944146 142.3 / 5.60 9.5 / 0.37 10.0 / 0.39 6.0 / 0.24
**** **** 4.1 / 0.16 0.2–1.2 / 0.01–0.05 A 20° F  91 10
HS 8247 0108480 149.8 / 5.90 18.0 / 0.71 10.0 / 0.39 6.0 / 0.24
**** **** 6.7 / 0.26 0.2–1.0 / 0.01–0.04 A 45° F  99 10
HS 8248 0108503 149.8 / 5.90 18.0 / 0.71 10.0 / 0.39 6.0 / 0.24
**** **** 6.7 / 0.26 0.2–0.8 / 0.01–0.03 A 45° F  99 10
HS 7190
* 141.3 / 5.56 9.0 / 0.35 9.0 / 0.35 6.0 / 0.24
**** 1.0 / 0.04
**** 0.2–1.0 / 0.01–0.05 T MB  98 10
HS 7191
* 141.3 / 5.56 9.0 / 0.35 9.0 / 0.35 6.0 / 0.24
**** 1.0 / 0.04
**** 0.1–1.0 / 0.01–0.05 T F  98 10
HS 7280
* 150.3 / 5.91 18.0 / 0.71 9.0 / 0.35 6.0 / 0.24
**** **** 3.5 / 0.14 0.2–0.8 / 0.01–0.03 A F 102 10
HS 7285
* 152.3 / 5.99 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24
**** **** 6.0 / 0.26 0.2–1.0 / 0.01–0.04 A F 103 10
HS 7290
* 140.3 / 5.52 8.0 / 0.31 10.5 / 0.41 6.0 / 0.24
**** **** 15.0 / 0.59 0.35–1.25 / 0.01–0.05 A MB 103 10
HS 7291 9944115 140.3 / 5.52 8.0 / 0.31 10.5 / 0.41 6.0 / 0.24
**** **** 15.0 / 0.59 0.35–1.25 / 0.01–0.05 A F 103 10
HS 7292 9960692 147.3 / 5.80 15.0 / 0.59 9.0 / 0.35 6.0 / 0.24 3.2 / 0.13 4.0 / 0.16
**** 0.35–0.8 / 0.01–0.03 ED F 101 10
HS 7293
* 140.3 / 5.52 8.0 / 0.31 10.5 / 0.41 6.0 / 0.24
**** **** 8.0 / 0.31 0.35–1.0 / 0.01–0.04 A F 103 10

** O = Oval. T = Tapered. T&R = Tapered & Relieved. A = Angle. TP = Tip. ED = Transverse End.
*** MB = Micro-Bevel®. F = Flush. UF = Ultra-Flush®.
**** Signifies dimensional data is not applicable to this specific tool.
HS SERIES PLIERS
• Long, foam covered handles provide added leverage, an • All HS cutters and pliers are ESD safe, using static
ergonomic grip, and reduced fatigue dissipative foam grips over conductive spring holders
• HS handle option can be applied to any standard • Contact Lindström for additional options
80 Series cutters or Supreme Series cutters and pliers
HS SERIES PLIERS C C C D
F
D
F
D
F
E E E
HS 7450 – HS 7894
B B B
A A A
Smooth Serrated Flat tip Round tip Chain tip
Part no. EAN code A B C D E F Head Jaw Tip Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch shape surface shape grams qty
HS 7490 9953704 152.3 / 5.99 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 3.2 / 0.13 Flat Nose Smooth Flat 100 10
HS 7590 0109395 152.3 / 5.99 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.4 / 0.055 0.7 / 0.027 Round Nose Smooth Round 101 10
HS 7890 0109401 164.3 / 6.47 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Chain Nose Smooth Chain 105 10
HS 7891 0109425 164.3 / 6.47 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Chain Nose Serrated Chain 106 10
HS 7892 0109432 161.3 / 6.35 29.0 / 1.14 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Bent Nose Smooth Chain 106 10
HS 7893 0109456 152.3 / 5.99 20.0 / 0.79 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Snipe Nose Smooth Chain 103 10
HS 7894
* 164.3 / 6.47 32.0 / 1.26 9.0 / 0.35 6.0 / 0.24 1.2 / 0.05 0.8 / 0.03 Needle Nose Smooth Chain 102 10
57
LF cutters and pliers
INTRODUCTION LF SERIES
Lindström LF Series,
for use in designated
Lead-Free work zones
Lindström started by solving a problem: how to cut hard
wire used to make fish hooks. From there the tasks didn’t
get any easier because jewelers and watchmakers adopted
Lindström cutters as their tool of choice. Over time, other
areas of concern have been identified and addressed within
our customers’ applications. ESD and cleanroom use are
important to some, ROHS compliance and traceability are
important to others. And we’ve responded with products
– and in some cases proof that our products are already
compliant – to address each of these environmental
concerns.
Lead-free assembly areas are vitally important to many

manufacturers. Some of our customers have set up
completely segregated production zones in which only
products used exclusively in lead-free assembly are
allowed. To help identify which Lindström pliers or cutters
are used in Pb-free areas, we offer green ESD safe grips in
the industry-standard color for “get the lead out” zones.
Lindström LF Series grips can be substituted for standard

handles on any 80 Series or Supreme Series cutters and
pliers.
Simply being green can be a big help!
58
All Lindström LF Series cutters
are ESD safe and safely dissipate
electrostatic charges, reducing
the possibility of damage to sensitive
components.

equipment.
LF 8140 oval head Micro-Bevel®
cutter, our most popular type.
LF 8144 small tapered Flush cutter,

good for limited access applications.
LF 8132 oval Ultra-Flush® cutter for truly

flush cuts unmatched by other brands.
The lead free icon employed by LF 7890 chain nose pliers for bending
Pb
many manufacturers uses Pb, the wire in lead-free areas.
symbol for lead from the periodic
table of elements. Lindström LF tools
are offered for use in lead free assembly
areas, and our handles are the industry
standard green to identify their purpose.
Contact Lindström for more

information regarding technical
specifications and ordering details.
LF Series tools are manufactured
LF 7893 snipe nose pliers, like other in
to order.
this range, can be fitted with our green
LF handles.
59
Specially engineered tools
INTRODUCTION SPECIALLY ENGINEERED TOOLS
Unique tools for

every situation
Lindström customers are innovators, pushing the envelope,
developing new technologies and building new industries.
When presented with a need to prepare prototypes, insert or
extract unique components, or cut proprietary hard wire, our
customers turn to Lindström for Specially Engineered Tools.
Lindström has developed tools used in specialized

applications for the largest names in medical device
manufacturing and for small start-up companies developing
new technology. Every project receives the same attention
to detail and a tool that is right for the job at hand.
To make the process easy Lindström has no minimum order

on Specially Engineered Tools. Our tool designers and
manufacturers representatives work directly with production
engineers to ensure success. We thrive on solving problems
with our customers.
Contact one of our authorized distributors,

manufacturers representatives or our office directly to
start the process of designing your special tool today
(specials.usa@lindstromtools.com).
The Lindström Design Process

The Lindström staff can design special application tools
by working from “before” and “after” components,
engineering drawings, or prototypes. We even build
tools drawn on the back of a napkin. It’s that easy!
A customer provides an idea Every project begins

for a specially engineered with a blank tool.
transistor tool.
60
The tools featured here and on the
following pages are a small sample
of over 1,500 different designs
that we have manufactured so far.
Several handle options are available
on Special Tools.
8154PSP cutter trims stents precisely.
331A-31 bend and cut pliers create precise

two-angle bend and cuts lead the same length
every time.
RX 601 forming pliers leave a standoff in wire

and on LED leads.
202A cut and clench pliers leave a swaged,

bent lead end that clenches the PCB.
Lindström tool designer Finished Transistor

shapes the tool according Forming Pliers RX 601-16 7292MI micro-mini end cutter is used to
to customer specifications. ready for delivery! cut wire inside a mini connector.
61
IC INSERTION/EXTRACTION TOOLS & IC CUTTERS
IC INSERTION/EXTRACTION TOOL
7992
• The 7990-7993 family of insertion tools can
be used for ICs or DIPs from 4 pin to 64 pin
• To order, indicate total number of pins on
IC/DIP and length of package
• Tool length: 4.5 in. / 114.3 mm
• Picture shows 80 Series handle
IC CUTTER
RX 501
• IC cutters can be produced to cut up to 10
pins simultaneously
• Standoff length is typically .040° (1 mm) but
can vary according to specifications
• To order, indicate total number of pins on
IC and standoff length. Example: For 14 pin
IC, order Part no. 501-14
• Tool length: 6 in. / 152.4 mm
• Tool can be produced with RX, 80 Series or
HS handles as specified by end user
COAXIAL CABLE CONNECTOR TOOL

801C
• Reduces possibility of marred connector
threads
• Picture shows ESD safe foam handle
62
STANDOFF CUTTERS
STRAIGHT STANDOFF SHEAR CUTTER .075"

111A
• Uncut lead capacity: 1.000" / 25.4 mm
• Cuts leads to length as needed
• Standard length is .075" (1.9 mm) but varies according
to specifications
• Cutter can be used on 16 AWG (1.295 mm) solid
copper and also trims wire wrap pins
• To order other than .075" standoff, specifiy length
(Example: For .065" standoff, order Part no. 111A-065)
• Picture shows Supreme Series handle
STRAIGHT STANDOFF SHEAR CUTTER .040"

112A
• Uncut lead capacity: .75" / 19 mm
• Anti-shock lead trimmer for use on 20 AWG (.813 mm)
copper wire or smaller
• Standoff is .040" (1 mm) unless otherwise specified
• To order other than .040" standoff, specify length
OBLIQUE STANDOFF SHEAR CUTTER .045"

121A
• Similar to 111A, heavy-duty type, featuring a 45° angle
to allow clearance for longer leads
• Standoff is .045" (1.14 mm) unless otherwise specified
• To order other than .045" standoff, specify length
• Tool can be produced with RX, 80 Series or HS handles
as specified by end user
63
STANDOFF CUTTERS
OBLIQUE STAND-OFF SHEAR CUTTER

HS122M
• 45° angle offers good lead visibility, does not limit lead
length
• Standard standoff is .060" and can be ordered in other
lengths
• To order other than .060" indicate lead length as a
suffix to the product code (example HS122M-080 for a
stand-off of .080")
• Picture shows HS Series handles
CUT AND BEND
STRAIGHT CUT, BEND AND CLENCH .060" 20°

202A
• Cuts leads to .060" (1.52 mm) and bends them at an
angle
• To order other than .060" and 20° indicate, lead length
and angle (Example: For .050" length and 30° angle,
order Part no. 202A-050 30°)
CUT & BEND .060" 45°

204B
• Bends leads at 45° then cuts, leaving a .060" (1.52 mm)
standoff
• Other angles and lengths are available
• To order other than 45° and .060", indicate degree of
bend required and lead length (Example: For 40° angle
and .050" length, order Part no. 204B-050 40°)
64
CUT AND BEND
OBLIQUE CUT, BEND AND CLENCH .060" 20°

212A
• Similar to 202A featuring an oblique angle that offers
improved lead visibility and accommodates longer leads
• To order other than .060" and 20°, indicate lead length
and angle (Example: For .055" length and 35° angle,
order Part no. 212A-055 35°)
CUT AND FORM
CUT AND FORM – UP TO 16 AWG

331A
• Cuts leads and forms dogleg on solid
copper as large as 16 AGW (1.295 mm)
• To order, furnish component or rough
drawing, indicate lead length, radii,
diameter and location
CUT AND FORM – UP TO 16 AWG

341A
• Cuts leads to length and forms stress
relief in component leads up to
16 AWG (1.9 mm) solid copper
• To order, furnish component or rough
drawing, indicate lead length, radii,
diameter and location
65
LEADFORMERS
FLAT PACK LEADFORMER

RX304D
• Cuts and forms multi-lead flat packs
• To order, indicate length from
component body to bend, angle of
bend and length of tail
• Picture shows RX Series handle
LEADFORMER – STRESS RELIEF UP TO 16 AWG

601A
• Forms leads for stress relief up to 16 AWG (1.9 mm) solid copper
• To order, indicate lead length (minimum/maximum) from compo-
nent body to P.C. board and lead diameter
45° OBLIQUE LEADFORMER – UNLIMITED LENGTH

614A
• Adds stress relief to leads in high density board population
applications
• Allows unlimited lead length forming with high visibility
• To order, indicate lead length (minimum/maximum) from
component body to P.C. board and lead diameter
66
CUTTERS
CUTTER
RX 8140PS
• Made for hard wire applications
• Medical device manufacturing of
pacemaker coils, stents, catheters
• PS cutting edge technology available in
many different models and 8130-8160
sizes
CUTTER
RX 8140PSF
• PSF cutting edge technology available
in many different models and 8130-8160
sizes
CUTTER
8154PSP
• Durable edge profile for tip-cuts on coil
applications
• Picture shows 80 Series handle; other
handle options available
67
CUTTERS
CUTTER
8160PS
• PS cutting edge technology available in
many different models and 8130-8160
sizes
• Picture shows 80 Series handle
MICRO-MINI END CUTTER

7292MI
• Specially engineered mini end cutter
• For micro-applications where access is
a concern
• Designed to customer specifications
CUSTOM FORMING PLIERS
CUSTOM LEADFORMER
RX 601-16
• Specially engineered leadforming pliers
• Turns 5 equal-length leads into 3 long
and 2 short leads
• Typically used on transistors
68
INTRODUCTION TWEEZERS
Tw e e z e r s
High quality Lindström tweezers 7-SA-ET

with ESD safe Ergo Touch grips
69
Tw e e z e r s
INTRODUCTION TWEEZERS
High-performing
and precise Tweezers
Lindström’s tweezers offer perfect balance, tip
alignment and symmetry as well as a wide variety
of materials and designs. Our tweezers meet the
most sophisticated and demanding requirements of
our customers: SMD handling, mini Ergo models,
cleanroom and ESD environments. We also make
special tweezers for unique applications.
70
7-SA-ET high quality Lindström
tweezers with ESD safe Ergo Touch
grips.
29D-SA reverse action tweezers can

be used to safely hold components
for placement.
249CFR-SA carbon fiber tweezers,

with replaceable tips, is often used in
laboratory and medical industries to
handle sensitive components.
71
Tw e e z e r s
LINDSTRÖM TWEEZERS STYLES
Lindström Tweezers
styles for every
application
Fiber Tip
Minimizes scratching and
damage to delicate surfaces,
high-temperature ESD safe tips.
Picture shows 248CF-SA.
SMD
Smooth edges and a wide choice of tips
and angles assure ease of component
handling and protection of board surfaces.
Picture shows SM104-SA.
Carbon Fiber Tweezers

with Replaceable Tips
ESD safe for use on sensitive electronic
assemblies. Good heat resistance
(150°C / 300°F) for positioning
components and devices in high-
temperature environments. Very
high rigidity and strength for precise
applications. Polyamide-based carbon
fiber offers excellent chemical resistance.
Picture shows 249CFR-SA.
72
General Purpose
Very accurate finish for a wide variety of
applications from electronics to bio medical
uses. Extremely accurate serration quality.
Different lengths, thicknesses and angles
for every application. Stainless and/or anti-
magnetic/anti-acid steel.
Picture shows 119-SA.
Extra Strength, General Purpose

Large and strong tips with perfect Component Handling
balance, symmetry and alignment for Anti-magnetic/anti-acid steel.
demanding tasks of all types. Picture shows 571-SA.
Picture shows 475-SA.
NC High Precision Super Alloy

High fatigue resistance, very high shape
retention, heat-resistant to 800°C / 1470°F.
Excellent for medical applications.
Picture shows 7-NC.
Ceramic Tip Tweezers

Electrically insulative, and
stable at high temperature.
Very hard surface, high
flexural strength and fracture
toughness. Extreme corrosion
resistance.
Picture shows 7MZ-SA.
SL Series Tweezers
Competitively priced, high quality
tweezers. ESD safe for secure use in
electronics assembly. Anti-acid stainless
steel for durable performance.
Picture shows 7A-SA-SL.
High Precision Ergo Touch Tweezers

Fine points, perfect alignment, Tactile grips for increased precision and
polished edges and anti-glare reduced fatigue. Static dissipative grips
satin finish for the most offer added comfort.
demanding work, particulary Picture shows 51S-SA-ET.
under magnification.
Picture shows 00B-SA.
73
Tw e e z e r s
HIGH PRECISION TWEEZERS
• Highest quality Swiss made tweezers • NC – Super Alloy (Ni-Cr-Mo) is six times harder than SA,
• Precise tips, with great attention to detail anti-magnetic
• S – Higher carbon stainless steel, when strength and • TA – Titanium alloy, anti-magnetic, very high heat
hardness are of highest concern resistance (1600°F, 800°C)
• SA – Standard material is ESD safe, anti-magnetic stainless • BR – Brass (copper-zinc alloy) anti-magnetic, good for
steel scratch sensitive parts
FLAT EDGE, FINE TIPS

0
Part no. EAN code L Weight Pack
NC version also 731415+ mm / inch grams qty
available as Ergo 0-SA 0109593 120 / 4.72 14 1
Touch (ET) style,
0-NC 0120026 120 / 4.72 21 1
see page 103 for
details.
FLAT EDGE, FINE TIPS

0C9 Available as Ergo
Touch (ET) style 731415+ mm / inch grams qty
in NC material, 0C9-SA 0109586 90 / 3.54 7 1
see page 103 for
details.
FLAT EDGE, THICK TIPS

00
Also available as Part no. EAN code L Weight Pack
731415+ mm / inch grams qty
Ergo Touch (ET)
style, see page 00-SA 0109579 120 / 4.72 22 1
103 for details.
THICK TIPS & SERRATED GRIPS

00B
00B-SA 0115402 120 / 4.72 21 1
SERRATED TIPS AND GRIPS

00D
00D-SA 0109562 120 / 4.72 21 1
74
Tw e e z e r s
STRONG, SEMI-FINE PRECISION TIP

000
Ergo Touch (ET) 731415+ mm / inch grams qty
style, see page 000-SA 0120028 120 / 4.72 20 1

103 for details.
STRONG, STRAIGHT FINE

1
1-SA 0109647 120 / 4.72 15 1
1-S 0120161 120 / 4.72 15 1
1-NC 0120178 120 / 4.72 15 1
1-TA 0120185 120 / 4.72 15 1
SHARP FINE TIPS

2
2-SA 0110117 120 / 4.72 15 1
2-S 0120031 120 / 4.72 15 1
2-NC 0120192 120 / 4.72 15 1
2-BR 0120208 120 / 4.72 15 1
STRAIGHT BLUNT TIPS

2A
2A-SA 0110100 120 / 4.72 15 1
2A-S 0120032 120 / 4.72 15 1

Also available as
2A-NC 0120215 120 / 4.72 15 1
Ergo Touch (ET)
style, see page 2A-TA 0120222 120 / 4.72 15 1
103 for details.
75
Tw e e z e r s
CURVED BLUNT
2AB
Also available as 2AB-SA 0110094 120 / 4.72 15 1
Ergo Touch (ET)
2AB-TA 0120239 120 / 4.72 15 1
style, see page
104 for details.
VERY SHARP TIPS

3
3-SA 0110162 120 / 4.72 13 1
3-S 0120246 120 / 4.72 15 1

Also available as
3-NC 0120033 120 / 4.72 13 1
Ergo Touch (ET)
style, see page 3-TA 0110179 120 / 4.72 9 1
104 for details.
VERY SHARP TIPS

3C
3C-SA 0110148 110 / 4.33 12 1
3C-NC 0120034 110 / 4.33 7 1

Also available as
3C-TA 0110155 110 / 4.33 7 1
Ergo Touch (ET)
style, see page 3C-BR 0120058 110 / 4.33 10 1
104 for details.
EXTRA FINE TIPS

4
4-SA 0120036 110 / 4.33 13 1
4-S 0120253 110 / 4.33 15 1

Also available as
4-NC 0120035 110 / 4.33 13 1
Ergo Touch (ET)
style, see page 4-TA 0120260 110 / 4.33 15 1
104 for details.
76
Tw e e z e r s
EXTRA FINE AND STRONG

4A
4A-SA 0110193 110 / 4.33 13 1
EXTRA FINE SMOOTH TIPS

5
5-SA 0110247 110 / 4.33 12 1
5-S 0120038 110 / 4.33 12 1

Also available as
5-NC 0120037 110 / 4.33 12 1
Ergo Touch (ET)
style, see page 5-TA 0110254 110 / 4.33 7 1
104 for details.
EXTRA FINE SMOOTH TIPS

5A
5A-SA 0110216 115 / 4.53 13 1
EXTRA FINE BENT TIPS

5B
5B-SA 0110223 110 / 4.33 13 1
5B-NC 0120039 110 / 4.33 13 1
77
Tw e e z e r s
EXTRA FINE DOUBLE BENT TIPS

5C
5C-SA 0110230 115 / 4.53 13 1
FLAT ANGLED TIPS

6
6-SA 0110261 115 / 4.53 15 1
FINE CURVED TIPS

7
7-SA 0110292 115 / 4.53 13 1
7-S 0120041 115 / 4.53 13 1

Also available as
Ergo Touch (ET) 7-NC 0120040 115 / 4.53 13 1
style, see page 7-TA 0120043 115 / 4.53 15 1

105 for details.
STRONG CURVED TIPS

7A
Ergo Touch (ET)
style, see page 7A-SA 0110285 115 / 4.53 14 1
105 for details.
78
Tw e e z e r s
SERRATED TIPS AND GRIPS

10G
10G-SA 0109609 110 / 4.33 13 1
STRONG TIPS, NICKEL PLATE

11
11-N 0116058 120 / 4.72 15 1
TAPERED CUTTING TIPS, CARBON STEEL

15A
12 mm 15A 0109616 115 / 4.53 27 1
0.47"
PARALLEL CUTTING TIPS, CARBON STEEL

15AGW Also available as ET
style, see page 105. Part no. EAN code L Weight Pack
15AGW 0109623 120 / 4.72 26 1

10 mm
0.39"
PARALLEL CUTTING TIPS, CARBIDE INSERT

15AGWHM
Hard wire 731415+ mm / inch grams qty
10 mm
0.39" 15AGWHM-SA 0120029 120 / 4.72 26 1
79
Tw e e z e r s
NARROW CUTTING TIPS, CARBON STEEL

15AP
12 mm 15AP 0109630 115 / 4.53 27 1
0.47"
STRONG FINE TIPS

27
27-SA 0109654 130 / 5.12 15 1
EXTRA SHARP, BENT TIPS

51S
Ergo Touch (ET)
51S-SA 0110209 115 / 4.53 13 1
style, see page
105 for details.
LONG, FINE, BENT TIPS

65A
65A-SA 0110278 140 / 5.51 12 1
STRONG TIPS, SERRATED GRIPS

AC
AC-SA 0110308 110 / 4.33 18 1
80
Tw e e z e r s
FLAT SQUARE-END TIPS

F
F-SA 0109883 120 / 4.72 15 1
MINI WITH SERRATED TIPS & GRIPS

M00D
M00D-SA 0109586 90 / 3.54 15 1
MINI WITH FLAT, SHARP, FINE TIPS

M2
M2-SA 0120369 90 / 3.54 15 1
MINI WITH ROUNDED FLAT TIPS

M2A
M2A-SA 0120376 80 / 3.15 15 1
MINI WITH SHARP, FINE TIPS

M3
M3-SA 0120154 90 / 3.54 15 1
81
Tw e e z e r s
MINI WITH VERY FINE TIPS

M4
M4-SA 0120383 90 / 3.54 15 1
MINI WITH EXTRA FINE TIPS

M5
Also available as 731415+ mm / inch grams qty
Ergo Touch (ET)
M5-SA 0120044 90 / 3.54 15 1
style, see page
106 for details.
VERY FINE TIPS

S
S-SA 0109906 120 / 4.72 13 1
SLENDER, LONG TIPS

SS
SS-SA 0109937 140 / 5.51 12 1
82
Tw e e z e r s
HIGH PRECISION REVERSE ACTION TWEEZERS
REVERSE ACTION DUCKBILL

2AX
2AX-SA 0110025 120 / 4.72 15 1
REVERSE ACTION SHARP, FINE

3X
3X-SA 0120069 115 / 4.53 15 1
REVERSE ACTION, EXTRA FINE

5AX
5AX-SA 0120070 115 / 4.53 15 1
ANTI-MAGNETIC, VERY FINE CURVED TIPS

7X
7X-SA 0120071 115 / 4.53 15 1
TWEEZERS REVERSE ACTION FINE

31
31-SA 0110490 120 / 4.72 12 1
83
Tw e e z e r s
GENERAL PURPOSE TWEEZERS
• Swiss made
• Handcrafted to perfect tip symmetry and balance
• Polished edges with superior no-scratch, anti-glare
satin finish
• All models are available in anti-magnetic, anti-acid
stainless steel (SA), other materials as noted
FINE SERRATED TIPS AND GRIPS

119
119-SA 0109951 150 / 5.91 19 1
STRONG SERRATED TIPS AND GRIPS

120
120-SA 0109975 150 / 5.91 25 1
STRONG, BLUNT, SERRATED TIPS AND GRIPS

121
121-SA 0109982 160 / 6.30 26 1
FINE, BENT, SERRATED TIPS AND GRIPS

122
122-SA 0109999 150 / 5.91 19 1
FINE, DOUBLE BENT, SERRATED TIPS AND GRIPS

123
123-SA 0110001 150 / 5.91 19 1
84
Tw e e z e r s
• Swiss made
satin finish
STRONG BENT TIPS

124
Serrated tips
and grips 124-SA 0110018 150 / 5.91 20 1
STRONG SERRATED TIPS

231
231-SA 0110087 120 / 4.72 14 1
BLUNT SERRATED TIPS AND GRIPS

475
475-SA 0110032 140 / 5.51 25 1
FINE, STRONG, ALIGNING PIN

648
Serrated tips
648-SA 0120062 150 / 5.91 25 1
and grips
648-NC 0110971 150 / 5.91 25 1
FINE, STRONG, ALIGNING PIN, BENT TIPS

649
649-SA 0110063 150 / 5.91 25 1

Serrated tips
and grips 649-NC 0120063 150 / 5.91 25 1
85
Tw e e z e r s
• Swiss made
satin finish
STRONG FINE TIPS

AA
AA-SA 0110551 130 / 5.12 17 1

AA-SA available
AA-S 0110544 130 / 5.12 17 1
as Ergo Touch (ET)
style, see page AA-TA 0110575 130 / 5.12 10 1
106 for details.
GENERAL PURPOSE REVERSE ACTION TWEEZERS
REVERSE ACTION SOLDERING/DESOLDERING

29
Straight tips 731415+ mm / inch grams qty
29-SA 0120068 150 / 5.91 20 1

29D
Formed tips 29D-SA 0110476 155 / 6.10 32 1

30
30-SA 0110483 165 / 6.50 32 1

Bent tips
86
Tw e e z e r s
PLASTIC TIP TWEEZERS
• No other factory can boast the experience and range of • DG/DL: acetal resin reinforced with 30 wt% glass fibre,
precise plastic tip tweezers found here insulating (not ESD), good chemical resistance
• CF: carbon fiber tips, polyamide 66 reinforced with 30 wt% • SV: polyvinylidene flouride reinforced with carbon fibre,
carbon fiber, ESD safe, good chemical resistance smooth surface, heat capacity up to 150°C, ESD safe, ex-
• CFR: replaceable carbon fiber tips (listed on pp 89–92) cellent chemical resistance to aggressive acids, solvents
and halogens, resistant to UV and radiation sterilization
• CP: PEEK (polyetheretherketone) reinforced with 30 wt%
carbon fiber, ESD safe, high heat capable (260-300°C),
excellent resistance to chemicals
CARBON FIBER TIPS

00CF
00CF-SA 0120082 130 / 5.12 15 1
CARBON FIBER TIPS

2ACF
2ACF-SA 0120085 130 / 5.12 15 1
CARBON FIBER TIPS, EXTRA FINE

5CF
5CF-SA 0120092 130 / 5.12 15 1
CARBON FIBER TIPS, SQUARE

248CF
248CF-SA 0110612 125 / 4.92 32 1
CARBON FIBER TIPS, THICK & STRONG

249CF
249CF-SA 0120088 130 / 5.12 17 1
87
Tw e e z e r s
CARBON FIBER SOFT TIPS, WIDE PADDLE

251
251-SA 0110643 110 / 4.33 17 1
CARBON FIBER SOFT TIPS, TAPER T

252
252-SA 0110650 110 / 4.33 17 1
CARBON FIBER SOFT TIPS, ANGLE SQUARE

253
253-SA 0110667 110 / 4.33 17 1
CARBON FIBER TIPS, 2 MM 3-ANGLE

255
255-SA 0110681 110 / 4.33 11 1
CARBON FIBER TIPS, STRONG POINT

259CF
259CF-SA 0110728 130 / 5.12 17 1
88
Tw e e z e r s
CARBON FIBER TIPS, STRONG BLUNT

269CF
269CF-SA 0110735 130 / 5.12 16 1
PLASTIC TIP TWEEZERS – REPLACEABLE TIPS
CARBON FIBER REPLACEABLE TIPS

00CFR
Flat edge, thick tips 731415+ mm / inch grams qty
00CFR-SA 0115402 130 / 5.12 19 1
CARBON FIBER REPLACEABLE STRAIGHT TIPS

2ACFR
Flat edge, 731415+ mm / inch grams qty
rounded tips
2ACFR-SA 0115419 130 / 5.12 19 1
CARBON FIBER REPLACEABLE CURVED TIPS

2ABCFR
Curved tips
2ABCFR-SA 0120083 130 / 5.12 15 1

5CFR
Extra fine tips Part no. EAN code L Weight Pack
5CFR-SA 0115426 130 / 5.12 19 1
89
Tw e e z e r s
PLASTIC TIP TWEEZERS – REPLACEABLE TIPS

7CFR
Fine, curved tips 731415+ mm / inch grams qty
7CFR-SA 0115433 130 / 5.12 19 1

246CFR
Thick & strong 731415+ mm / inch grams qty
246CFR-SA 0120130 130 / 5.12 15 1

249CFR
Flat edge, thick tips 731415+ mm / inch grams qty
249CFR-SA 0115143 130 / 5.12 15 1
CARBON FIBER REPLACEABLE TIPS, STRONG

259CFR, 259-DLR, 259-SVR
259CFR-SA 0115150 130 / 5.12 19 1
Extra fine tips 259-DLR-SA 0120089 130 / 5.12 19 1
259-SVR-SA 0120090 130 / 5.12 19 1
90
Tw e e z e r s
PLASTIC TIP TWEEZERS – REPLACEABLE TIP SETS
REPLACEABLE TIP SET FOR 00CFR

00 ACF Flat edge, thick tips Part no. EAN code L Weight Pack
00 ACF 0115440 40 / 1.57 2 1*
* Includes 2 tips and 2 screws in a plastic bag
REPLACEABLE TIP SET FOR 2ACFR

2A ACF Flat edge, Part no. EAN code L Weight Pack
rounded tips 731415+ mm / inch grams qty
2A ACF 0115457 40 / 1.57 2 1*
REPLACEABLE TIP SET FOR 2ABCFR

2AB ACF Curved tips
2AB ACF 0120104 40 / 1.57 2 1*

5 ACF Extra fine tips Part no. EAN code L Weight Pack
5 ACF 0115464 40 / 1.57 2 1*
91
Tw e e z e r s

7 ACF Fine, curved tips Part no. EAN code L Weight Pack
7 ACF 0115471 40 / 1.57 2 1*

246 ACF Thick & strong
246 ACF 0120277 40 / 1.57 2 1*

249 ACF Flat edge, thick tips
249 ACF 0115174 40 / 1.57 2 1*

259 ACF Extra fine tips Part no. EAN code L Weight Pack
259 ACF 0115167 40 / 1.57 2 1*
92
Tw e e z e r s
PLASTIC TWEEZERS
• 100% plastic tweezers in three materials for lightweight • SV: polyvinylidene flouride reinforced with carbon fibre,
operation smooth surface, heat capacity up to 150°C, ESD safe,
• CF: carbon fiber tips, polyamide 66 reinforced with 30 wt% excellent chemical resistance to aggressive acids,
carbon fiber, ESD safe, good chemical resistance solvents and halogens, resistant to UV and radiation
sterilization
• DG/DL: acetal resin reinforced with 30 wt% glass fibre,
insulating (not ESD), good chemical resistance
STRAIGHT, FINE TIP

705
705CF 0120284 115 / 4.53 5 1
705DG 0109593 115 / 4.53 5 1
705SV 0109609 115 / 4.53 5 1
STRAIGHT, PARALLEL FINE TIP

707
Fine, strong, Part no. EAN code L Weight Pack
parallel tips
707CF 0120291 115 / 4.53 5 1
707DG 0120307 115 / 4.53 5 1
707SV 0109616 115 / 4.53 5 1
BENT PARALLEL STRONG TIP

708
Angled, fine, Part no. EAN code L Weight Pack
parallel tips
708CF 0120314 115 / 4.53 5 1
708DG 0120321 115 / 4.53 5 1
708SV 0109623 115 / 4.53 5 1
PARALLEL SQUARED TIP

709
Strong, square, Part no. EAN code L Weight Pack
parallel tips 731415+ mm / inch grams qty
709CF 0120338 115 / 4.53 5 1
709DG 0120345 115 / 4.53 5 1
709SV 0109630 115 / 4.53 5 1
93
Tw e e z e r s
PLASTIC TWEEZERS
• 100% plastic tweezers in three materials for lightweight • SV: polyvinylidene flouride reinforced with carbon fibre,
operation smooth surface, heat capacity up to 150°C, ESD safe,
• CF: carbon fiber tips, polyamide 66 reinforced with 30 wt% excellent chemical resistance to aggressive acids,
carbon fiber, ESD safe, good chemical resistance solvents and halogens, resistant to UV and radiation
sterilization
• DG/DL: acetal resin reinforced with 30 wt% glass fibre,
insulating (not ESD), good chemical resistance
PARALLEL, PADDLE TIPS

710
Strong, parallel Part no. EAN code L Weight Pack
paddle tips 731415+ mm / inch grams qty
710CF 0120352 115 / 4.53 5 1
710DG 0109647 115 / 4.53 5 1
710SV 0109654 115 / 4.53 5 1
CERAMIC REPLACEABLE TIP TWEEZERS
• Advanced ceramic type MZ tweezers tips made with • Excellent thermal properties and high temperature
Zirconia Toughened Alumina (ZTA) stability exceeding 1000˚C
• Not intended for ESD safe applications, electrically • Extreme corrosion resistance, nearly chemically inert
insulative
• Hard, strong tweezers with low density provide good
abrasion and wear resistance
CERAMIC REPLACEABLE TIPS

2AMZ Straight tips Part no. EAN code L Weight Pack
2AMZ-SA 0120098 135 / 5.31 15 1

7MZ
Curved tips Part no. EAN code L Weight Pack
7MZ-SA 0120147 135 / 5.31 15 1
94
Tw e e z e r s
insulative

71MZ Straight sharp tips Part no. EAN code L Weight Pack
71MZ-SA 0120100 135 / 5.31 15 1

72MZ Straight, fine
sharp tips Part no. EAN code L Weight Pack
72MZ-SA 0120101 135 / 5.31 15 1

73MZ
Strong sharp tips Part no. EAN code L Weight Pack
73MZ-SA 0120102 140 / 5.51 15 1

74MZ Straight, strong tips Part no. EAN code L Weight Pack
74MZ-SA 0120103 140 / 5.51 15 1
REPLACEABLE TIP SET FOR 2AMZ

A2AMZ
A2AMZ 0120105 35 / 1.38 2 1
95
Tw e e z e r s
insulative
REPLACEABLE TIP SET FOR 7AMZ

A7MZ Fine curved tips.
A7MZ 0120106 43.5 / 1.71 2 1
REPLACEABLE TIP SET FOR 71MZ

A71MZ
A71MZ 0120107 30 / 1.18 2 1

A72MZ
A72MZ 0120108 30 / 1.18 2 1

A73MZ
XXX
A73MZ 0120109 33 / 1.30 2 1

A74MZ
XXX
A74MZ 0120110 40 / 1.57 2 1
96
Tw e e z e r s
WAFER HANDLING TWEEZERS
• Top quality Swiss design and manufacturing ensures • Satin anti-glare finish for use in spotlighted work areas
precise attention to detail • Specially designed for use with delicate,
• SA stainless steel fragile wafer types
• ESD safe permanent or replaceable tips
• Choice of CF, CP, DG or SV materials for plastic jaws
2" WAFER HANDLING TWEEZERS, CPR

2WFCPR
Replaceable 731415+ mm / inch grams qty
6.6 mm wide 2WFCPR-SA 0120086 130 / 5.12 15 1
carbon fiber tips
3" WAFER HANDLING TWEEZERS

3WL
9.5 mm wide Part no. EAN code L Weight Pack
anti-magnetic 731415+ mm / inch grams qty
stainless steel 3WL-SA 0120072 125 / 4.92 15 1

tips

4WF
12 mm wide tips 731415+ mm / inch grams qty
4WF-SA 0120073 125 / 4.92 15 1

4WFG
12 mm wide 731415+ mm / inch grams qty
serrated tips 4WFG-SA 0120074 125 / 4.92 15 1

4WL
12 mm wide tips 731415+ mm / inch grams qty
4WL-SA 0120075 125 / 4.92 15 1
97
Tw e e z e r s
WAFER HANDLING TWEEZERS
• Top quality Swiss design and manufacturing ensures • Satin anti-glare finish for use in spotlighted work areas
precise attention to detail • Specially designed for use during delicate, fragile wafer
• SA stainless steel handling
• ESD safe permanent or replaceable tips
• Choice of CF, CP, DG or SV materials for plastic jaws
4" WAFER HANDLING TWEEZERS, CPR

4WFCPR
Replaceable 731415+ mm / inch grams qty
12 mm wide 4WFCPR-SA 0120091 130 / 5.12 15 1
carbon fiber tips

8WNY
65 mm wide
nylon jaws Part no. EAN code L Weight Pack
8WNY-SA 0120116 150 / 5.91 40 1

8WT
65 mm wide
teflon jaws Part no. EAN code L Weight Pack
8WT-SA 0120123 150 / 5.91 40 1

8WTC1
65 mm wide
ESD safe
teflon jaws
8WTC1-SA 0120081 150 / 5.91 40 1
98
Tw e e z e r s
FLAT TIP TWEEZERS
• High precision Swiss made tweezers

• Anti-magnetic, anti-acid stainless steel
• Serrated gripping area for precise manipulation
• Smooth scratch proof tips for handling sensitive
components
RECTANGULAR, SMOOTH TIPS

34A
34A-SA 0110124 120 / 4.72 15 1
FAN SHAPE, SMOOTH TIPS

35A
35A-SA 0110131 120 / 4.72 14 1
COMPONENT HANDLING TWEEZERS
• Superior Swiss quality in each design • All component handling tweezers are made of
• Handcrafted to perfect tip symmetry and balance SA stainless steel
• Polished edges with superior no-scratch, anti-glare satin finish • Tips are precisely formed for consistent results
COMPONENT HANDLING
571
2.5–5.0 mm 731415+ mm / inch grams qty
571-SA 0110391 145 / 5.71 25 1
COMPONENT HANDLING 90˚

572
572-SA 0110407 145 / 5.71 26 1
99
Tw e e z e r s
COMPONENT HANDLING TWEEZERS
• Superior Swiss quality in each design • Tips are precisely formed for consistent results
• Polished edges with superior no-scratch, anti-glare satin finish
• All component handling tweezers are made of
SA stainless steel
COMPONENT HANDLING 45˚ ANGLE

573
573-SA 0110414 145 / 5.71 25 1
SMD TWEEZERS
• Highest quality Swiss manufacturing • Satin anti-glare finish and ergonomic design
• Smooth handling and positioning of SMD components • ESD safe SA steel
• Different tips and angles for specific applications • Modifications or special models available on request
SMD REVERSE ACTION, 3-LEAD SOT PACKAGES

SM104
SM104-SA 0110780 120 / 4.72 15 1
SMD REVERSE ACTION, ALL SOT PACKAGES

SM105
SM105-SA 0110797 120 / 4.72 15 1
SMD REVERSE ACTION, FLAT BASE TIPS

SM106
SM106-SA 0110803 120 / 4.72 15 1
100
Tw e e z e r s
SMD TWEEZERS
• Highest quality Swiss manufacturing • Modifications or special models available on request

• Smooth handling and positioning of SMD components
• Different tips and angles for specific applications
• Satin anti-glare finish and ergonomic design
• ESD safe SA steel
SMD REVERSE ACTION, 60˚ ANGLE

SM107
SM107-SA 0110810 120 / 4.72 15 1
SMD GROOVED TIPS, 1 MM

SM108
SM108-SA 0110827 120 / 4.72 15 1
SMD GROOVED TIPS, 45˚ ANGLE

SM109
SM109-SA 0110834 120 / 4.72 15 1
SMD GROOVED TIPS FOR CHIPS

SM110
SM110-SA 0110841 120 / 4.72 15 1
SMD GROOVED TIPS FOR 5 MM CHIPS

SM111
SM111-SA 0110858 120 / 4.72 15 1
101
Tw e e z e r s
SMD TWEEZERS
• Highest quality Swiss manufacturing • Modifications or special models available on request

• Smooth handling and positioning of SMD components
• Different tips and angles for specific applications
• Satin anti-glare finish and ergonomic design
• ESD safe SA steel

SM112
SM112-SA 0110865 120 / 4.72 15 1
SMD 1 FORK, 60˚ ANGLE

SM113
SM113-SA 0110872 120 / 4.72 15 1
SMD 1 FORK, VERTICAL

SM114
SM114-SA 0110889 120 / 4.72 15 1

SM115
SM115-SA 0110896 120 / 4.72 15 1
SMD GROOVED TIPS, VERTICAL

SM116
SM116-SA 0110902 120 / 4.72 14 1
102
Tw e e z e r s
ERGO TOUCH TWEEZERS
• High quality Lindström tweezers with soft ESD safe foam • ESD safe packaging protects tweezers on workbench
Ergo Touch grips and in tool cases
• Static dissipative material provides reliable ESD protection • ET tweezers are offered on select SA, S and NC types;
• Anti-acid, anti-magnetic stainless steel for use in contact Lindström for a quote on outfitting other
many environments tweezers with ET grips
FLAT EDGE, FINE TIPS, SUPER ALLOY

0
0-NC-ET 0120027 120 / 4.72 21 1
MINI STYLE, VERY SHARP TIPS, SUPER ALLOY

0C9
0C9-NC-ET 0120046 90 / 3.54 21 1
FLAT EDGE, THICK TIPS

00
00-SA-ET 8279219 120 / 4.72 28 1
STRONG, SEMI-FINE PRECISION TIP

000
000-SA-ET 0120047 120 / 4.72 21 1
FLAT, DUCKBILL TIPS

2A
2A-SA-ET 0120057 120 / 4.72 21 1
103
Tw e e z e r s
ERGO TOUCH TWEEZERS
CURVED BLUNT TIPS

2AB
2AB-SA-ET 0120049 115 / 4.53 21 1
VERY SHARP TIPS

3
3-SA-ET 8279356 120 / 4.72 19 1
VERY SHARP TIPS

3C
3C-SA-ET 8279240 110 / 4.33 18 1
EXTRA FINE TIPS

4
4-SA-ET 0120059 110 / 4.33 21 1
EXTRA FINE TIPS

5
5-SA-ET 8279257 110 / 4.33 18 1
5-NC-ET 0120050 110 / 4.33 21 1
104
Tw e e z e r s
ERGO TOUCH TWEEZERS
VERY FINE CURVED TIPS

7
7-SA-ET 8279264 115 / 4.53 19 1
STRONG CURVED TIPS

7A
7A-SA-ET 0120060 115 / 4.53 21 1
PARALLEL CUTTING TIPS

15AGW
15-AGW-ET 8279233 115 / 4.53 32 1
CUTTING TWEEZERS, ULTRA-FLUSH FLAT TIPS

15UFF
15-UFF-ET 0120030 120 / 4.72 21 1
VERY SHARP BENT TIPS

51S
51S-SA-ET 0120052 120 / 4.72 21 1
51S-NC-ET 0120051 120 / 4.72 21 1
105
Tw e e z e r s
ERGO TOUCH TWEEZERS
STRONG FINE TIPS

AA
AA-SA-ET 8279271 130 / 5.12 23 1
MINI STYLE WITH EXTRA FINE TIP

M5
M5-SA-ET 0120045 90 / 3.54 21 1
106
Tw e e z e r s
SL TWEEZERS
• Lindström SL (service level) tweezers for use in production, • ESD safe properties for use in sensitive environments
assembly and field service kits • Matte finish for reduction of glare in intensely lit
• Swiss quality at lower cost for applications that do not environments
require the highest precision
• Anti-acid, anti-magnetic stainless steel same as our other
tweezers
FLAT EDGE, STRONG TIPS

00
00-SA-SL 3580034 120 / 4.72 22 1
STRONG TIPS
1
1-SA-SL 3580041 120 / 4.72 13 1
SHARP, FINE TIPS

2
2-SA-SL 3580065 120 / 4.72 15 1
FLAT ROUNDED TIPS

2A
Sometimes called Part no. EAN code L Weight Pack
“Duckbill” tip
tweezers 2A-SA-SL 3580058 120 / 4.72 15 1
STRONG SHARP TIPS

3C
3C-SA-SL 3580072 110 / 4.33 12 1
107
Tw e e z e r s
SL TWEEZERS
tweezers
VERY SHARP TIPS

3
3-SA-SL 3580089 120 / 4.72 13 1
FINE TIPS
4
4-SA-SL 3580094 110 / 4.33 13 1
EXTRA FINE TIPS

5
5-SA-SL 3580119 110 / 4.33 12 1
VERY FINE TIPS

5A
5A-SA-SL 3580102 115 / 4.53 13 1
FINE CURVED TIPS

7
7-SA-SL 3580133 115 / 4.53 13 1
108
Tw e e z e r s
SL TWEEZERS
tweezers
STRONG, CURVED TIPS

7A
7A-SA-SL 3580126 115 / 4.53 14 1
STRONG FINE TIPS

AA
AA-SA-SL 3580140 130 / 5.12 17 1
STRONG TIPS, SERRATED GRIP

AC
AC-SA-SL 0120053 110 / 4.33 18 1
STRONG FINE TIPS

MM
MM-SA-SL 3580164 130 / 5.12 15 1
SLENDER, FINE LONG TIPS

SS
SS-SA-SL 0120055 140 / 5.51 12 1
109
To r q u e p r o d u c t s
INTRODUCTION TORQUE PRODUCTS
High precision
Torque Screwdrivers
Lindström Torque Screwdrivers virtually eliminate the over-application of
force, thereby reducing the risk for damage and rework costs. They feature
an ergonomic shape, a positive grip powder-coating, and a anti-magnetic
ESD safe bit holder that accepts any standard 1/4" Hex drive bit.
The two models available are the Micro-Adjustable Torque Screwdriver and
the Preset Torque Screwdriver. The Lindström Digital Torque Tester™ (DTT™)
is an excellent callibration instrument at a reasonable cost.
Preset Torque Screwdriver

Outstanding for high-volume use in
assembly where precision and repeatability
is paramount. Torque values are easily set
on this durable driver.
The end cap removes for access to the

1/8" Hex adjustment screw (Hex key
included with each driver). Use a certified
torque tester like the DTT™ to verify
the exact torque value after adjustment.
Replace the end cap and it’s ready to go.
110
Micro-Adjustable
Torque Screwdriver
A flexible torque tool for a wide range of
production applications. This driver allows
instant changes to the torque value with the
easy-to-read window scale and a precise
pull-to-set, push-to-lock adjustment knob.
Adjusting the screwdriver is easy. Simply pull

the adjusting knob to unlock, then turn it to the
desired torque value while keeping an eye on
the major scale in the window and the minor
scale on the knob. When the correct setting is
reached push in the knob until it clicks.
All Lindström torque

devices are ESD safe.
Warning! Lindström Torque

Screwdrivers should never be
used on electrified equipment.
Digital Torque Tester™

The Lindström Digital Torque Tester™ (DTT™) will calibrate or
check values on torque wrenches and torque screwdrivers. The
DTT501-EZ DTT™ can be mounted on a wall, bench-top or mobile test cart,
and is a great addition to any calibration laboratory.
The Digital Torque Tester™ features an easy-to-use touch

screen to capture peak torque values in real time, and downlo-
ad stored torque data to a computer. Lindström testers are sold as
complete kits that include AC/DC power supply, USB cable, Hex
adapter, instruction manual and sturdy carrying case.
See listing on page 113 for specifications.
111
MICRO-ADJUSTABLE TORQUE SCREWDRIVERS
• Micro-Adjustable Torque Screwdriver • ISO 6789, ISO 1174, ASME B107.300-2010

• ESD safe (IEC 61340-5-1 & EN 100015-1) • Store driver in the protective case at lowest torque setting
• Torque limiting clutch prevents over application of force • Powder coat wrinkle finish provides positive grip
to fastener • Accuracy meets or exceeds +/-6% over recommended
• 1/4" Hexagon anti-magnetic spring loaded bit holder usage period: 5000 cycles or one year, whichever occurs first
to avoid ESD damage to sensitive equipment or • Standard adjustable drivers include SAE window scale, ISO
components in electronic applications (metric) versions available on request
MICRO-ADJUSTABLE TORQUE SCREWDRIVER Micro-adjustable drivers may also be special

MAL500-1 – MAL500-3 ordered with ISO (Metric) window scale.
Call 626.956.1201 for other options.
B
8
9
200
80
60
40
20
160
120
OZ.
80
40
NCM
D C
0
IN.
180
140
100
60
20
70
50
30
10
1
2
A
Part no. EAN code A B C D Hexagon Capacity Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch Bit Holder in.ozs / in.lbs grams qty
MAL500-1 112593 138.0 / 5.43 18.2 / 0.72 28.0 / 1.10 9.6 / 0.38 1/4" 20-200 in.ozs 195 1
MAL500-2 112609 157.0 / 6.18 18.2 / 0.72 28.0 / 1.10 9.6 / 0.38 1/4" 3-15 in.lbs 260 1
MAL500-3 112616 171.0 / 6.73 18.2 / 0.72 32.0 / 1.26 9.6 / 0.38 1/4" 5-40 in.lbs 306 1
PRESET TORQUE SCREWDRIVERS
• Preset Torque Screwdriver, with powder coat finish • Accuracy meets or exceeds +/-6% over recommended
for sure grip usage period: 5000 cycles or one year, whichever occurs first
• Cam-over torque limiting clutch for repeatability • DIN/ISO 6789, EN 26789/1994
• 1/4" Hexagon anti-magnetic spring loaded bit holder to • To order, please specify at what value to set the driver and
avoid ESD damage to sensitive equipment or components Lindström will supply a Certificate of Calibration at no charge
in electronic applications • Preset screwdrivers ordered without specifying setting will be
set to lowest torque value and shipped without certificate
PRESET TORQUE SCREWDRIVER

PS501-1 – PS501-4
D C
Part no. EAN code A B C D Hexagon Capacity Weight Pack

731415+ mm / inch mm / inch mm / inch mm / inch Bit Holder Ncm / in.ozs / in.lbs grams qty
PS501-1 0112425 115.0 / 4.53 18.2 / 0.72 28.0 / 1.10 9.6 / 0.38 1/4" 4-22 Ncm / 6-32 in.ozs 147 1
PS501-2 0112432 141.0 / 5.55 18.2 / 0.72 28.0 / 1.10 9.6 / 0.38 1/4" 7-70 Ncm / 10-100 in.ozs 187 1
PS501-3 0112449 141.0 / 5.55 18.2 / 0.72 28.0 / 1.10 9.6 / 0.38 1/4" 15-170 Ncm / 1.5-15 in.lbs 198 1
PS501-4 0112456 154.0 / 6.06 18.2 / 0.72 32.0 / 1.26 9.6 / 0.38 1/4" 45-450 Ncm / 4-40 in.lbs 270 1
112
DIGITAL TORQUE TESTER™
Features Specifications
• Integral transducer and sturdy enclosure allow mounting • Selection of units of torque available: Nm, kgcm, fl.lb, in.lb
in virtually any position and in.oz
• Audible indicator for torque range • Torque range: 1.25 in.lb to 50 in.lb (20–800 in.oz)
• LCD touch screen display • Torque accuracy: ±0.5% ±1 count CW & CCW
• AC power supply included from 20–100% of full scale at 77°F (25°C)
• Battery backup (6 AA Alkaline batteries included) • Display accuracy: 4 digits, 9999 cycle counts
• ISO-6789-2003 and ASME B107.300-2010 compliant • Operating temperature: 40–110°F (5–42°C)
• Certificate of NIST traceability from 20 to 100% of full • Storage temperature: 0–122°F (-20–50°C)
scale • Humidity up to 85% non-condensing
• Highly accurate transducer for precise measurement and
repeatability
DIGITAL TORQUE TESTER™

DTT501-EZ
Calibrates and verifies

values on torque
wrenches and torque
screwdrivers.
Part no. UPC code Unit width Height Depth Torque range Operating temp. Storage temp. Unit weight Shipping weight Pack
mm / inch mm / inch mm / inch inch ounces °F / °C °F / °C lbs. lbs. qty
DTT501-EZ 0662459332431 254.0 / 10.0 387.4 / 15.25 63.5 / 2.5 20–800 40–110 / 5–42 0–122 / -20–50 10.6 17.25 1
113
ERGO® screwdrivers
INTRODUCTION ERGO® SCREWDRIVERS
ERGO Screwdrivers ®
For outstanding
precision and comfort
Exhaustive ergonomic studies and tests are the basis of the handle design
of ERGO® screwdrivers. The studies revealed how a screwdriver is typically
used and how the handle should be designed to obtain a comfortable and
effective grip in all situations. These tests resulted in a handle design featur-
ing different diametrics: thin, near the shaft, nearest to the shaft, for starting
fasteners and a larger diameter for applying higher torque.
The handle always fits comfortably in the hand. The cross-section pat-
tern and material surface texture of the handle are also the result of
extensive ergonomic research and testing. In addition to being comforta- Hardened
ble to use in different work situations, the round and efficiently patterned phosphate
treated tip
shape permits high torque and reduces the risk of injury.
The strength of ERGO® screwdrivers exceeds the requirements

of ISO standards by a good margin, in some cases more
than 60%. The specially hardened steel shaft has a
phosphate treated pro-point tip. Larger screw-
drivers are equipped with a practical hexagonal
drive on the blade, so that a wrench can be
used whenever greater force is required.
BE-8260 shown at right.
Slotted: DIN 5265, ISO 2380-2,

Tip DIN 5264-A, ISO 2380-1
Picture shows BE-8030.
Pozidriv®: DIN 5262, ISO 8764-2,

Tip DIN 5260, ISO 8764-1
Phillips : DIN 5262, ISO 8764-2,

®
Tip DIN 5260, ISO 8764-1

114
Flat surface on the Can be hung on
screwdriver handle a peg, secured
limits rolling by a lanyard or
used for added
Only rounded contours. leverage
No pressure points, no
matter how you hold or
use the screwdriver
Three-component
handle combines
strong core with
comfortable grip
BE-8260
Color-coded handle
and symbol on the
end, which don’t
Optimal length for wear out
Hexagonal nut on
quick turning, good
certain models
access and precise
where extra force
control
is necessary
Our scientific ERGO® Development

Program (the “11-Point Program”)
Torx® has resulted in many successful and
Picture shows BE-8910. scientifically evaluated ergonomic tools.
While many others just talk about

ergonomics, we deliver.
Hexagon
115
ERGO® screwdrivers
SLOTTED SCREWDRIVERS
SLOTTED
BE-8010 – BE-8255
Screwdriver for
slotted screws
Part no. EAN code Weight Pack

731415+ grams qty
mm / inch mm / inch mm / inch mm / inch mm / inch
BE-8010 0010615 0.4 / 0.01 2.5 / 0.09 50.0 / 1.96 16.0 × 102.0 / 0.63 × 4.02 15.0 / 5.98 17 5
BE-8020 0010639 0.5 / 0.02 3.0 / 0.11 50.0 / 1.96 16.0 × 102.0 / 0.63 × 4.02 152.0 / 5.98 20 5
BE-8020L 1838591 0.5 / 0.020 3.0 / 0.11 75.0 / 2.95 16.0 × 102.0 / 0.63 × 4.02 177.0 / 7.0 22 5
BE-8030 0010653 0.6 / 0.024 3.5 / 0.13 75.0 / 2.95 20.0 × 122.0 / 0.79 × 4.80 197.0 / 7.76 35 5
BE-8040 0010677 0.8 / 0.03 4.0 / 0.15 100.0 / 3.93 20.0 × 122.0 / 0.79 × 4.80 222.0 / 8.75 38 5
BE-8150 0010707 1.0 / 0.039 5.5 / 0.21 100.0 / 3.92 27.0 × 122.0 / 1.06 × 4.80 222.0 / 8.75 70 5
BE-8155 0010721 1.2 / 0.05 6.5 / 0.26 125.0 / 4.92 36.0 × 122.0 / 1.42 × 4.80 247.0 / 9.72 101 5
BE-8210 1838584 0.4 / 0.01 2.5 / 0.09 75.0 / 2.95 16.0 × 102.0 / 0.63 × 4.02 177.0 / 7.0 18 5
BE-8220 0047741 0.5 / 0.020 3.0 / 0.11 125.0 / 4.92 16.0 × 102.0 / 0.63 × 4.02 227.0 / 9.0 22 5
BE-8230 0047758 0.6 / 0.024 3.5 / 0.13 125.0 / 4.92 20.0 × 122.0 / 0.79 × 4.80 247.0 / 9.72 38 5
BE-8240 0047765 0.8 / 0.03 4.0 / 0.15 175.0 / 6.89 20.0 × 122.0 / 0.79 × 4.80 297.0 / 11.69 47 5
BE-8250 0047772 1.0 / 0.039 5.5 / 0.21 150.0 / 5.90 27.0 × 122.0 / 1.06 × 4.80 272.0 / 10.70 75 5
BE-8250L 1838607 1.0 / 0.039 5.5 / 0.21 200.0 / 7.87 27.0 × 122.0 / 1.06 × 4.80 322.0 / 12.67 90 5
BE-8255 0047789 1.2 / 0.05 6.5 / 0.26 150.0 / 5.90 36.0 × 122.0 / 1.42 × 4.80 272.0 / 10.70 114 5
SLOTTED STUBBY TYPE

BE-8330 – BE-8455
Screwdriver for slotted
screws
Stubby type for working
in confined spaces
ISO 2380/DIN 5264

731415+ grams qty
mm / inch mm / inch mm / inch mm / inch mm / inch
BE-8330 1838614 0.6 / 0.02 3.5 / 0.13 25.0 / 0.98 36.0 × 0.58 / 1.42 × 2.28 83.0 / 3.26 43 5
BE-8340 1838621 0.8 / 0.03 4.0 / 0.15 25.0 / 0.98 36.0 × 0.58 / 1.42 × 2.28 83.0 / 3.26 43 5
BE-8350 1838638 1.0 / 0.04 5.5 / 0.21 25.0 / 0.98 36.0 × 0.58 / 1.42 × 2.28 83.0 / 3.26 43 5
BE-8355 1838652 1.2 / 0.05 6.5 / 0.26 25.0 / 0.98 36.0 × 0.58 / 1.42 × 2.28 83.0 / 3.26 43 5
BE-8360 1838676 1.2 / 0.05 8.0 / 0.31 25.0 / 0.98 36.0 × 0.58 / 1.42 × 2.28 83.0 / 3.26 50 5
BE-8450 1838645 1.0 / 0.04 5.5 / 0.21 45.0 / 1.77 36.0 × 0.58 / 1.42 × 2.28 103.0 / 4.05 51 5
BE-8455 1838669 1.2 / 0.05 6.5 / 0.26 45.0 / 1.77 36.0 × 0.58 / 1.42 × 2.28 103.0 / 4.05 25 5
116
ERGO® screwdrivers
SLOTTED SCREWDRIVERS WITH HEXAGON COLLAR
SLOTTED WITH HEXAGON COLLAR -8 890

5 , BE
886 880
BE-8160 – BE-8890 BE- E-8
-826
0, 0, B
Screwdriver for 887
, BE BE-
160
E-8
slotted screws B
Hexagon bolstered
blade, two-handed grip
ISO 2380/DIN 5264

731415+ grams qty
mm / inch mm / inch mm / inch mm / inch mm / inch mm / inch
BE-8160 0010745 1.2 / 0.05 8.0 / 0.31 125.0 / 4.92 36.0 × 122.0 / 1.42 × 4.80 247.0 / 9.72 11.0 / 0.43 142 5
BE-8260 0047796 1.2 / 0.05 8.0 / 0.31 175.0 / 6.88 36.0 × 122.0 / 1.42 × 4.80 297.0 / 11.69 11.0 / 0.43 165 5
BE-8865 0010851 1.6 / 0.06 8.0 / 0.31 175.0 / 6.88 36.0 × 161.0 / 1.42 × 6.33 336.0 / 13.25 13.0 / 0.51 176 5
BE-8870 0010875 1.6 / 0.06 10.0 / 0.39 175.0 / 6.88 36.0 × 161.0 / 1.42 × 6.33 336.0 / 13.25 13.0 / 0.51 200 5
BE-8880 0010899 2.0 / 0.08 12.0 / 0.47 200.0 / 7.86 36.0 × 161.0 / 1.42 × 6.33 361.0 / 14.20 13.0 / 0.51 272 5
BE-8890 0010905 2.5 / 0.09 14.0 / 0.55 200.0 / 7.86 36.0 × 161.0 / 1.42 × 6.33 361.0 / 14.20 16.0 / 0.63 276 5
HEXAGON SOCKET SCREWDRIVERS
HEXAGON SOCKET / HEXAGON COLLAR 0

871
BE-
BE-8702 – BE-8710
Screwdriver for hexagonal
screws, ball ended
BE-8710 with Hexagon
bolstered blade,
30° 30°
two-handed grip

731415+ grams qty
mm / inch mm / inch mm / inch
BE-8702 1838768 110.0 / 4.33 16.0 × 102.0 / 0.63 × 4.02 212.0 / 8.35 2 22 5
BE-8725 1838775 110.0 / 4.33 17.0 × 102.0 / 0.67 × 4.02 212.0 / 8.35 2.5 22 5
BE-8703 0027651 110.0 / 4.33 16.0 × 102.0 / 0.63 × 4.02 212.0 / 8.35 3 25 5
BE-8704 0027668 110.0 / 4.33 20.0 × 122.0 / 0.79 × 4.80 232.0 / 9.13 4 41 5
BE-8705 0027675 110.0 / 4.33 27.0 × 122.0 / 1.06 × 4.80 232.0 / 9.13 5 65 5
BE-8706 0027682 140.0 / 5.51 27.0 × 122.0 / 10.6 × 4.80 262.0 / 10.31 6 97 5
BE-8708 0027699 150.0 / 5.90 36.0 × 122.0 / 1.42 × 4.80 272.0 / 10.71 8 178 5
BE-8710 0027705 150.0 / 5.90 36.0 × 161.0 / 1.42 × 6.34 311.0 / 12.24 10 250 5
117
ERGO® screwdrivers
PHILLIPS® SCREWDRIVERS
PHILLIPS®
BE-8600 – BE-8620L
Screwdriver for
Phillips® screws

731415+ grams qty
BE-8600 0010769 60.0 / 2.36 16.0 × 102.0 / 0.63 × 4.02 162.0 / 6.38 0 19 5
BE-8610 0010776 75.0 / 2.95 20.0 × 122.0 / 0.79 × 4.80 197.0 / 7.75 1 46 5
BE-8610L 1838683 200.0 / 7.87 20.0 × 122.0 / 0.79 × 4.80 322.0 / 12.67 1 75 5
BE-8620 0010783 100.0 / 3.94 27.0 × 122.0 / 1.06 × 4.80 222.0 / 8.74 2 72 5
BE-8620L 1838690 200.0 / 7.87 27.0 × 122.0 / 1.06 × 4.80 322.0 / 12.67 2 85 5
PHILLIPS® WITH HEXAGON COLLAR BE-

8640
0
863
BE-
BE-8630 – BE-8640
Screwdriver for
Phillips® screws
Hexagon bolstered blade
BE-8640 with
two-handed grip

731415+ grams qty
mm / inch mm / inch mm / inch mm / inch
BE-8630 0010790 150.0 / 5.90 36.0 × 122.0 / 1.42 × 4.80 272.0 / 10.71 11.0 / 0.43 3 154 5
BE-8640 0010806 200.0 / 7.87 36.0 × 161.0 / 1.42 × 6.34 361.0 / 14.21 16.0 / 0.63 4 222 5
PHILLIPS® STUBBY TYPE

BE-8601– BE-8602
Screwdriver for
Phillips® screws
in confined spaces

731415+ grams qty
BE-8601 1838706 25.0 / 0.98 36.0 × 58.0 / 1.42 × 2.28 83.0 / 3.26 1 40 5
BE-8602 1838713 25.0 / 0.98 36.0 × 58.0 / 1.42 × 2.28 83.0 / 3.26 2 45 5
118
ERGO® screwdrivers
POZIDRIV® SCREWDRIVERS
POZIDRIV®
BE-8800 – BE-8820L
Screwdriver for
Pozidriv® screws

731415+ grams qty
BE-8800 0042012 60.0 / 2.36 16.0 × 102.0 / 0.63 × 4.02 162.0 / 6.34 0 19 5
BE-8810 0010813 75.0 / 2.95 20.0 × 122.0 / 0.79 × 4.80 197.0 / 7.76 1 40 5
BE-8810L 1838720 200.0 / 7.86 20.0 × 122.0 / 0.79 × 4.80 322.0 / 12.67 1 75 5
BE-8820 0010820 100.0 / 3.94 27.0 × 122.0 / 1.06 × 4.80 222.0 / 8.74 2 72 5
BE-8820L 1838737 200.0 / 7.87 27.0 × 122.0 / 1.06 × 4.80 322.0 / 12.67 2 85 5
POZIDRIV® WITH HEXAGON COLLAR

BE-8830
Screwdriver for
Pozidriv® screws
Hexagon bolstered blade

731415+ grams qty
BE-8830 0010837 150.0 / 5.90 36.0 × 122.0 / 1.41 × 4.80 272.0 / 10.71 11.0 / 0.43 3 136 5
POZIDRIV® STUBBY TYPE

BE-8801 –BE-8802
Screwdriver for
Pozidriv® screws
in confined spaces

731415+ grams qty
BE-8801 1838744 25.0 / 0.98 36.0 × 58.0 / 1.42 × 2.28 83.0 / 3.26 1 40 5
BE-8802 1838751 25.0 / 0.98 36.0 × 58.0 / 1.42 × 2.28 83.0 / 3.26 2 45 5
119
ERGO® screwdrivers
TORX® SCREWDRIVERS
TORX® 945
E-8
940, B
BE-8906 – BE-8945 930 BE-8
– BE-8
8 906
Screwdriver for BE-
Torx® screws
BE-8940 and
BE-8945 with
two-handed grip

731415+ grams qty
BE-8906 0027729 50.0 / 1.97 16.0 × 102.0 / 0.63 × 4.02 152.0 / 5.98 1.70 / 0.07 T6 15 5
BE-8907 0027736 55.0 / 2.16 16.0 × 102.0 / 0.63 × 4.02 157.0 / 6.18 1.99 / 0.08 T7 22 5
BE-8908 0027743 60.0 / 2.36 16.0 × 102.0 / 0.63 × 4.02 162.0 / 6.38 2.31 / 0.09 T8 23 5
BE-8909 0027750 60.0 / 2.36 20.0 × 122.0 / 0.79 × 4.80 182.0 / 7.16 2.50 / 0.10 T9 41 5
BE-8910 0027767 65.0 / 2.56 20.0 × 122.0 / 0.79 × 4.80 187.0 / 7.36 2.74 / 0.11 T10 34 5
BE-8915 0027774 70.0 / 2.75 20.0 × 122.0 / 0.79 × 4.80 192.0 / 7.56 3.27 / 0.13 T15 35 5
BE-8920 0027781 80.0 / 3.15 27.0 × 122.0 / 1.06 × 4.80 202.0 / 7.95 3.86 / 0.15 T20 60 5
BE-8925 0027798 80.0 / 3.15 27.0 × 122.0 / 1.06 × 4.80 202.0 / 7.95 4.43 / 0.17 T25 55 5
BE-8927 0027804 100.0 / 3.94 36.0 × 122.0 / 1.42 × 4.80 222.0 / 8.74 4.99 / 0.20 T27 96 5
BE-8930 0027811 100.0 / 3.94 36.0 × 122.0 / 1.42 × 4.80 222.0 / 8.74 5.52 / 0.22 T30 96 5
BE-8940 0027828 130.0 / 5.12 36.0 × 161.0 / 1.42 × 6.34 291.0 / 11.46 6.65 / 0.26 T40 163 5
BE-8945 1838782 130.0 / 5.12 36.0 × 161.0 / 1.41 × 6.34 291.0 / 11.46 7.82 / 0.31 T45 163 5
120
ERGO® screwdrivers
ERGO® SCREWDRIVER SETS
SLOTTED/PHILLIPS®
BE-9881 ERGO® screwdriver
set, 6 pcs
For Slotted and
Phillips® screws
In display box

731415+ mm / inch mm / inch grams qty
BE-9881 0043279 BE-8020 - 0.5 × 3 × 50 / 0.02 × 0.11 × 1.96 BE-8610 - PH 1 × 75 / 2.95 450 1
BE-8040 - 0.8 × 4 × 100 / 0.03 × 0.15 × 3.93 BE-8620 - PH 2 × 100 / 3.94
BE-8150 - 1.0 × 5.5 × 100 / 0.039 × 0.21 × 3.92
BE-8155 - 1.2 × 6.5 × 125 / 0.05 × 0.26 × 4.92
TORX®
set, 5 pcs
For Torx® screws
In display box

731415+ grams qty
BE-9885 0048465 BE-8910 - T10 355 1

BE-8915 - T15
BE-8920 - T20
BE-8925 - T25
BE-8930 - T30
SLOTTED/PHILLIPS®/POZIDRIV®
set, 6 pcs
For Slotted, Phillips®
and Pozidriv® screws
In display box

731415+ mm / inch mm / inch mm / inch grams qty
BE-9886 0048472 BE-8030 - 0.6 × 3.5 × 75 / BE-8610 - PH 1 × 75 / 2.95 BE-8810 - PZ 1 × 75 / 2.95 430 1
0.024 × 0.13 × 2.95 BE-8620 - PH 2 × 100 / 3.94 BE-8820 - PZ 2 × 100 / 3.94
BE-8150 - 1.0 × 5.5 × 100 /
0.039 × 0.21 × 3.92
121
Spare parts
INTRODUCTION SPARE PARTS
Always ready to go
with Lindström spare parts
122
Spare parts
BIOSPRING® FOR RX SERIES
• Tension is kept minimal and limited thoughout the • Tension and opening width can be adjusted according to
working cycle of the tool preference via three ports
• Handle width is controlled for ease of tool pick-up • Almost indestructible in normal use
and handling • On facing page, a spring is properly inserted for sure retention
BIOSPRING® RX SPRING ADJUSTMENT:
RX8000 Fits all RX Series 1. Pull the tool apart 2. Place the spring in
the desired port
3. Close the tool
cutters and pliers
Part no. EAN code Weight Pack qty

731415+ grams
RX8000 0103263 5 5
SPRINGS FOR 80, EX, HS AND SUPREME SERIES
• Due to the long life of 80 Series, EX Series, HS Series and

Supreme Series cutters and pliers, replaceable springs help
reduce down time and the need to stock substitute tools
RETURN SPRINGS
SP8000, SP8160, EX8000 Part no. EAN code Cutters and Pliers Weight Pack
731415+ grams qty
Springs to fit all SP8000 0111572 HS, 80 Series 8130-8158; all Supreme 2 1 PR
non-RX cutters
SP8160 0111589 HS, 80 Series 8160-8168 2 1 PR
and pliers
EX8000 0109685 EX Series 2 1 PR
LEAD CATCHER FOR 80, RX, HS AND SUPREME SERIES
• Patented lead catcher holds cut wires, preventing injury and • The lead catchers can be removed and reused
keeping leads from flying into the assembly • Sold in packs of 5
LEAD CATCHER
813, 814 Part no. EAN code Cutters Weight Pack
731415+ grams qty
813 0055852 8130 – 8138, RX 8130 – 8138, HS 8130 – 8138, 7190–7191 4 5

Easy to install
and remove 814 0055845 8140 – 8148, RX 8140 – 8148, HS 8140 – 8148 4 5
Lead catchers for other products are available on request.

Please contact Lindström for more information.
123
Wa r r a n t y a n d S e r v i c e s
Warranty
Lindström brand tools carry a full guarantee covering defects in material and workmanship.
Tools subjected to abnormal use, abuse, alteration or use after the tool is significantly worn are
not covered by this warranty. The Lindström facility conducts all tool evaluations for warranty
claims. To start the warranty process contact your Lindström distributor.
Returns for warranty evaluation from North American customers should be sent to:
Lindström Precision Tools

Attn: Warranty Dept.
19240 San Jose Avenue
City of Industry, California 91748
Phone: 626.956.1201
E-mail: service.usa@lindstromtools.com
Questions involving the performance of your

Lindström tools should be directed to our
customer service office listed above.
124
Services
Only factory-authorized service can offer resharpening and reconditioning
that keeps the Lindström lifetime warranty intact. Our service center in
City of Industry offers a full range of reconditioning, calibration and tool
sharpening for all Lindström brand products and other brands. Services
offered include:
• Cutter reconditioning: Sharpening cutting edges, installing new grips &

springs, adjusting the joint
• Sharpening only: Cutters, scissors, cutting tweezers
• Pliers reconditioning: Jaw resurfacing, installing new grips and springs
and adjusting the joint
• Pliers modification: Adding serrations, super-radiused edges and
handle retrofitting
• Recalibration: Repair, recalibration, and recertification for torque
screwdrivers
• Tweezers reconditioning: Tip straightening and realignment
Call 626.956.1201 or E-mail us at

service.usa@lindstromtools.com for price and lead-time.
Tools for servicing should be sent to:
Lindström Precision Tools

Attn: Recon Dept.
19240 San Jose Avenue
City of Industry, California 91748
125
Index
INDEX BY TYPE
ERGO®
CUTTERS SCREWDRIVERS
ANGLE OVAL TAPERED TAPERED AND RELIEVED ERGO® SCREWDRIVER

7280 20, 48 8130 20, 42, 45, 128 7190 20, 48 8136 20, 43 SETS
7285 20, 49 8131 20, 42 7191 20, 48 8137 20, 43 BE-9881 121
7290 20, 49 8132 20, 42 8133 20, 43 8138 20, 43 BE-9885 121
7291 20, 49 8140 7, 20, 41, 42, 128 8134 20, 43 8146 20, 43 BE-9886 121
7293 20, 49 8141 9, 20, 42 8135 20, 43 8147 20, 43
8211 20, 44 8142 20, 42 8143 20, 43 8148 20, 43 HEXAGON SOCKET
8247 20, 44 8150 11, 20, 42, 128 8144 20, 41, 43 8156 20, 43 BE-8702 117
8248 20, 45 8151 20, 42 8145 20, 43 8157 20, 43 BE-8703 117
HS 7280 20, 57 8152 20, 42 8153 20, 43 8158 20, 43 BE-8704 117
HS 7285 20, 57 8160 20, 42, 128 8154 20, 43 8166 20, 43 BE-8705 115, 117
HS 7290 20, 57 8161 20, 42 8155 20, 43 8167 20, 43 BE-8706 117
HS 7291 20, 57 8162 20, 42 8163 20, 43 8168 20, 43 BE-8708 117
HS 7293 20, 57 EX 8140 20, 36 8164 20, 43 EX 776 20, 36 BE-8725 117
HS 8211 20, 55, 57 EX 8141 20, 36 8165 20, 43 EX 777 20, 36
HS 8247 20, 57 EX 8150 20, 35, 36 HS 7190 20, 57 HS 8136 20, 56 HEXAGON SOCKET
HS 8248 20, 57 EX 8151 20, 36 HS 7191 20, 57 HS 8137 20, 56 WITH HEXAGON COLLAR
LF 7280 20 HS 8130 20, 56 HS 8133 20, 56 HS 8138 20, 56 BE-8710 117
LF 7285 20 HS 8131 20, 56 HS 8134 20, 56 HS 8146 20, 56
LF 7290 20 HS 8132 20, 56 HS 8135 20, 56 HS 8147 20, 56 PHILLIPS®
LF 7291 20 HS 8140 20, 55, 56 HS 8143 20, 56 HS 8148 20, 56 BE-8600 118
LF 7293 20 HS 8141 20, 56 HS 8144 20, 56 HS 8156 20, 56 BE-8610 114, 118, 121
LF 8211 20 HS 8142 20, 56 HS 8145 20, 56 HS 8157 20, 56 BE-8610L 118
LF 8247 20 HS 8150 20, 56 HS 8153 20, 56 HS 8158 20, 56 BE-8620 118, 121
LF 8248 20 HS 8151 20, 56 HS 8154 20, 56 HS 8166 20, 57 BE-8620L 118
RX 8211 20, 26 HS 8152 20, 56 HS 8155 20, 56 HS 8167 20, 57
RX 8247 20, 26 HS 8160 20, 56 HS 8163 20, 57 HS 8168 20, 57 PHILLIPS® STUBBY
RX 8248 5, 20, 26 HS 8161 20, 57 HS 8164 20, 57 LF 8136 20 BE-8601 118
HS 8162 20, 57 HS 8165 20, 57 LF 8137 20 BE-8602 118
HEAVY DUTY LF 8130 20 LF 7190 20 LF 8138 20
TRX 8180 31 LF 8131 20 LF 7191 20 LF 8146 20 PHILLIPS®
LF 8132 20, 59 LF 8133 20 LF 8147 20 WITH HEXAGON COLLAR
MICRO TIP LF 8140 20, 59 LF 8134 20 LF 8148 20 BE-8630 118
RX 8233 20, 27 LF 8141 20 LF 8135 20 LF 8156 20 BE-8640 118
RX 8234 20, 27 LF 8142 20 LF 8143 20 LF 8157 20
RX 8237 20, 27 LF 8150 20 LF 8144 20, 59 LF 8158 20 POZIDRIV®
LF 8151 20 LF 8145 20 LF 8166 20 BE-8800 119
MINIATURE END LF 8152 20 LF 8153 20 LF 8167 20 BE-8810 114, 119, 121
7292 20, 47, 50 LF 8160 20 LF 8154 20 LF 8168 20 BE-8810L 119
HS 7292 20, 57 LF 8161 20 LF 8155 20 RX 8136 20, 25 BE-8820 119, 121
LF 7292 20 LF 8162 20 LF 8163 20 RX 8137 20, 25 BE-8820L 119
RX 8130 20, 24 LF 8164 20 RX 8138 20, 25
MULTI-PURPOSE SHEAR RX 8131 20, 24 LF 8165 20 RX 8146 20, 25 POZIDRIV® STUBBY
HS6000 31 RX 8132 20, 24 RX 8133 20, 25 RX 8147 20, 25 BE-8801 119
HS6001 31 RX 8140 20, 22, 24 RX 8134 20, 25 RX 8148 7, 20, 25 BE-8802 119
RX 8141 20, 24 RX 8135 20, 25 RX 8156 20, 25
RX 8142 20, 24 RX 8143 20, 25 RX 8157 20, 25 POZIDRIV®
RX 8150 20, 23, 24 RX 8144 20, 25 RX 8158 20, 25 WITH HEXAGON COLLAR
RX 8151 20, 24 RX 8145 20, 25 RX 8166 20, 25 BE-8830 119
RX 8152 20, 24 RX 8153 20, 25 RX 8167 20, 25
RX 8160 20, 24 RX 8154 20, 25 RX 8168 20, 25
RX 8161 20, 24 RX 8155 20, 25
RX 8162 20, 24 RX 8163 20, 25 TIP
RX 8164 20, 25 8149 20, 44
PLASTIC RX 8165 20, 25 HS 8149 20, 56
P6160 32 LF 8149 20
RX 8149 20, 24
126
Index
INDEX BY TYPE
SPECIALLY TORQUE
PLIERS SPARE PARTS ENGINEERED TOOLS PRODUCTS
SLOTTED BENT NOSE BIOSPRING® CUT AND BEND DIGITAL TORQUE

BE-8010 116 7892 5, 9, 20, 46, 52 RX8000 123 202A 61, 64 TESTER™
BE-8020 116, 121 HS 7892 20, 57 204B 64 DTT501-EZ 111, 113
BE-8020L 116 LF 7892 20 LEAD CATCHER 212A 65
BE-8030 114, 116, 121 RX 7892 9, 20, 29 813 123 MICRO-ADJUSTABLE
BE-8040 116, 121 814 123 CUT AND FORM SCREWDRIVER
BE-8150 116, 121 CHAIN NOSE 331A 61, 65 MAL500-1 112
BE-8155 116, 121 7890 20, 51, 128 REPLACEABLE SPRINGS 341A 7, 65 MAL500-2 112
BE-8210 116 7891 7, 20, 51 EX8000 123 MAL500-3 5, 112
BE-8220 116 EX 7890 20, 35, 38 SP8000 123 CUTTERS
BE-8230 116 HS 7890 20, 55, 57 SP8160 123 8154PSP 11, 61, 67 PRESET SCREWDRIVER
BE-8240 116 HS 7891 20, 57 8160PS 68 PS501-1 112
BE-8250 116 LF 7890 20, 59 RX 8140PS 67 PS501-2 112
BE-8250L 116 LF 7891 20 RX 8140PSF 67 PS501-3 112
BE-8255 116 RX 7890 9, 20, 29 PS501-4 112
RX 7891 20, 23, 29 END CUTTERS
SLOTTED STUBBY 7292MI 61, 68
BE-8330 116 FLAT NOSE
BE-8340 116 7490 20, 50 FORMING PLIERS
BE-8350 116 EX 7490 20, 37 RX 601 61
BE-8355 116 HS 7490 20, 57 RX 601-16 61, 68
BE-8360 116 LF 7490 20
BE-8450 116 RX 7490 20, 28 IC INSERTION/
BE-8455 116 EXTRACTION TOOLS
NEEDLE NOSE 801C 62
SLOTTED 7894 20, 53 7992 62
WITH HEXAGON COLLAR EX 7894 20, 39 RX 501 62
BE-8160 117 HS 7894 20, 57
BE-8260 114, 115, 117 LF 7894 20 LEADFORMERS
BE-8865 117 RX 7894 20, 30 601A 66
BE-8870 117 614A 66
BE-8880 117 ROUND/FLAT NOSE RX304D 66
BE-8890 117 EX 7450 20, 37
STANDOFF CUTTERS
TORX® ROUND NOSE 111A 63
BE-8906 120 7590 20, 47, 51 112A 63
BE-8907 120 EX 7590 20, 38 121A 63
BE-8908 120 HS 7590 20, 57 HS122M 64
BE-8909 120 LF 7590 20
BE-8910 115, 120, 121 RX 7590 20, 28
BE-8915 120, 121
BE-8920 120, 121 SNIPE NOSE
BE-8925 120, 121 7893 20, 52, 128
BE-8927 120 HS 7893 20, 55, 57
BE-8930 120, 121 LF 7893 20, 59
BE-8940 120 RX 7893 20, 30
BE-8945 120
127
Index Appendix
INDEX BY TYPE Actual sizes of

Cutters and Pliers
See Product selection guide
and Product options on
pages 20–21
TWEEZERS
CERAMIC 649-SA 85 15A 79 259 ACF 92

REPLACEABLE TIP AA-S 86 15AGW 79 259CFR-SA 90
2AMZ-SA 94 AA-SA 86 15AGWHM-SA 79 259CF-SA 88
7MZ-SA 73, 94 AA-TA 86 15AP 80 259DLR-SA 90
71MZ-SA 95 27-SA 80 259SVR-SA 90
72MZ-SA 95 HIGH PRECISION 31-SA 83 269CF-SA 89
8130 extra small = XS
73MZ-SA 95 00B-SA 73, 74 51S-SA 80
74MZ-SA 95 0C9-SA 74 65A-SA 80 SL
A2AMZ 95 00D-SA 74 AC-SA 80 00-SA-SL 107
A7MZ 96 0-NC 74 F-SA 81 1-SA-SL 107
A71MZ 96 000-SA 75 M00D-SA 81 2A-SA-SL 107
A72MZ 96 00-SA 74 M2A-SA 81 2-SA-SL 107
A73MZ 96 0-SA 74 M2-SA 81 3C-SA-SL 107
A74MZ 96 1-NC 75 M3-SA 81 3-SA-SL 108
8140 small = S
1-S 75 M4-SA 82 4-SA-SL 108
COMPONENT HANDLING 1-SA 75 M5-SA 82 5A-SA-SL 108
571-SA 73, 99 1-TA 75 S-SA 82 5-SA-SL 108
572-SA 99 2AB-SA 76 SS-SA 82 7A-SA-SL 73, 109
573-SA 100 2AB-TA 76 7-SA-SL 108
2A-NC 75 PLASTIC AA-SA-SL 109
ERGO TOUCH 2A-S 75 705CF 93 AC-SA-SL 109
0C9-NC-ET 103 2A-SA 75 705DG 93 MM-SA-SL 109
0-NC-ET 103 2A-TA 75 705SV 93 SS-SA-SL 109
8150 medium = M
000-SA-ET 103 2AX-SA 83 707CF 93
00-SA-ET 103 2-BR 75 707DG 93 SMD
2AB-SA-ET 104 2-NC 75 707SV 93 SM104-SA 72, 100
2A-SA-ET 103 2-S 75 708CF 93 SM105-SA 100
3C-SA-ET 104 2-SA 75 708DG 93 SM106-SA 100
3-SA-ET 104 3C-BR 76 708SV 93 SM107-SA 101
4-SA-ET 104 3C-NC 76 709CF 93 SM108-SA 101
5-NC-ET 104 3C-SA 76 709DG 93 SM109-SA 101
5-SA-ET 104 3C-TA 76 709SV 93 SM110-SA 101
7A-SA-ET 105 3-NC 76 710CF 94 SM111-SA 101
7-SA-ET 69, 71, 105 3-S 76 710DG 94 SM112-SA 102 8160 large = L
15-AGW-ET 105 3-SA 76 710SV 94 SM113-SA 102
15-UFF-ET 105 3-TA 76 SM114-SA 102
51S-NC-ET 105 3X-SA 83 PLASTIC TIP SM115-SA 102
51S-SA-ET 5, 73, 105 4A-SA 77 00 ACF 91 SM116-SA 102
AA-SA-ET 106 4-NC 76 00CFR-SA 89
M5-SA-ET 106 4-S 76 00CF-SA 87 WAFER HANDLING
4-SA 76 2A ACF 91 2WFCPR-SA 97
FLAT TIP 4-TA 76 2AB ACF 91 3WL-SA 97
34A-SA 99 5A-SA 77 2ABCFR-SA 89 4WFCPR-SA 98
35A-SA 99 5AX-SA 83 2ACFR-SA 89 4WFG-SA 97
5B-NC 77 2ACF-SA 87 4WF-SA 97 7893 small = S
GENERAL PURPOSE 5B-SA 77 5 ACF 91 4WL-SA 97
29D-SA 71, 86 5C-SA 78 5CFR-SA 89 8WNY-SA 98
29-SA 86 5-NC 77 5CF-SA 87 8WTC1-SA 98
30-SA 86 5-S 77 7 ACF 92 8WT-SA 98
119-SA 73, 84 5-SA 77 7CFR-SA 90
120-SA 84 5-TA 77 246 ACF 92
121-SA 84 6-SA 78 246CFR-SA 90
122-SA 84 7A-SA 78 248CF-SA 72, 87
123-SA 84 7-NC 73, 78 249 ACF 92
124-SA 85 7-S 78 249CFR-SA 11, 71, 72, 90
231-SA 85 7-SA 78 249CF-SA 87
475-SA 73, 85 7-TA 78 251-SA 88
648-NC 85 7X-SA 83 252-SA 88
648-SA 85 10G-SA 79 253-SA 88 7890 medium = M
649-NC 85 11-N 79 255-SA 88
128
Welcome to the Lindström World
of High Precision
Lindström Precision Tools Catalog, USA-3

LIN-2013-ENG
Concept, Graphic Design and Photography – www.gracemill.se
Printed in USA
City of Industry, California, May 2013

LINDSTRÖM PRECISION TOOLS
1 9 2 4 0 S A N J O S E AV E N U E
C I T Y O F I N D U S T RY | C A 9 1 7 4 8
W W W. L I N D S T R O M T O O L S . U S

Handtool Pliers

Uploaded by

Copyright:

Available Formats

Handtool Pliers

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Handtool Pliers

Uploaded by

Copyright:

Available Formats

W W W. L I N D S T R O M T O O L S .

The Lindström Catalog displays our full

12 Cutters and pliers

Introduction RX Series – The ultimate in comfort, performance and precision ............................... 22

Miscellaneous Cutters – Listings and Specifications .............................................................................................................. 31

Introduction 80 Series – The original Lindström 80 Series Cutters .................................................................... 40

Introduction Supreme Series – Supreme Series for dependable results ................................................... 46

Introduction HS Series – The original ergonomic handtools ........................................................................................ 54

Introduction LF Series – For use in designated Lead-Free work zones ...................................................... 58

110 Torque products

114 ERGO Screwdrivers

122 Spare Parts

124 Warranty and Services

LINDSTRÖM – PERFECTING HANDTOOLS SINCE 1856

Lindström is one of the Snap-on Industrial brands.

We know it can be aggravating when products do not perform as expected, so

Thank you for choosing to be a Lindström customer.

Our RX Series ergonomic pliers were the

The micro-adjustable torque screwdriver is

51S-SA-ET tweezers: soft ESD safe,

AEROSPACE AND DEFENSE

Lindström has developed tools used in specialized

Our designers and manufacturers representatives

We thrive on solving problems with our customers.

Contact one of our authorized distributors, manufac-

341A cut and form pliers put stress

8140 oval head cutter and 7891 chain

JEWELRY AND HOBBY

Today makers of jewelry and hobby creations –

Comfort, balance and ergonomics are important

Exacting users demand a flush cut that is truly

RX 7890 and RX 7892 pliers allow

8141 cutters provide Flush cuts on

MEDICAL DEVICE MANUFACTURING

Lindström tools for

For over thirty years, Lindström cutters have

Lindström technological improvements are driven

Lindström has led the way in providing handtools

Our specially engineered PS, PSF and PSP cutters

Most Lindström cutters can also be reconditioned

Technician cuts cathether wire to

Carbon fiber tweezers 249CFR-SA is

PRECISION CUTTERS BY LINDSTRÖM

Another characteristic of a Lindström cutter is lubricity, the

PRECISION CUTTERS BY LINDSTRÖM

Tapered and Relieved

PRECISION PLIERS BY LINDSTRÖM

Lindström precision Pliers for

Holding pliers are available in almost unlimited

Lindström’s well-renowned precision holding pliers are

Supreme Series pliers

PRECISION PLIERS BY LINDSTRÖM

Super radiused edges

Tip shape (end-on view)

PRODUCT SELECTION GUIDE Cutting capacity – Solid copper wire 2

8136 XS T&R MB 25 43 56 *  0.8 mm

8137 XS T&R F 25 43 56 *  0.8 mm

8138 XS T&R UF 25 43 56 *  0.5 mm

8146 S T&R MB 25 43 56 *  1.0 mm

8147 S T&R F 25 43 56 *  1.0 mm