Aqu 4518 R1
Aqu 4518 R1
Aqu 4518 R1
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/65-17i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m By HUAWEI
Antenna Specifications
Electrical Properties
790 - 960 1710 - 2690 1710 - 2170
Frequency range (MHz) 2490 - 2690
790 - 894 880 - 960 1710 - 1990 1920 - 2200 2300 - 2690 1710 - 1990 1920 - 2170
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 0 - 10 , continuously adjustable 0 - 10 , continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
16.5 16.6 16.3 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2 17.2 17.4 17.0 17.7 17.9 17.4 17.5 17.6 17.0
Side lobe suppression for first side 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
lobe above main beam (Typ.) (dB) 17 16 16 17 16 16 17 17 16 17 17 16 16 16 15 17 16 16 17 16 16 16 16 15
Horizontal 3dB beam width (°) 65 64 66 63 60 66 63 60
Vertical 3dB beam width (°) 8.2 7.3 5.7 5.2 4.2 5.7 5.2 4.2
VSWR < 1.5
Intra-system: ≥ 28
Isolation between ports (dB)
Inter-system: ≥ 30
Front to back ratio, copolar (dB) Typ. 27 Typ. 28 Typ. 28 Typ. 28
0° Typ. 18 Typ. 18 Typ. 18 Typ. 18
Cross polar ratio (dB)
±60° Typ. 10 Typ. 10 Typ. 10 Typ. 10
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2530 x 360 x 175 Radome colour Light grey
Packing dimensions (H x W x D) (mm) 2890 x 499 x 279 Operational temperature (℃) -40 .. +65
Antenna net weight (kg) 32 Frontal: 950 (at 150 km/h)
Wind load (N) Lateral: 310 (at 150 km/h)
Bracket weight (kg) 5.6 Rear side: 985 (at 150 km/h)
Packing weight (kg) 48 Max. operational wind speed (km/h) 150
Mechanical downtilt (°) 0-8 Survival wind speed (km/h) 200
Mast diameter (mm) 50 - 115 Connector 8 x 7/16 DIN Female
Radome material Fiberglass Connector position Bottom
1
AQU4518R1
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/65-17i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m By HUAWEI
106
Integrated RCU Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC in/out DC return n/c
AISG interface (each pin)
Lightning protection (kA) 3 (10/350 μs)
2530
2425
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
2
AQU4518R1
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/65-17i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m By HUAWEI
790 - 960 MHz 1710 - 2690 MHz 1710 - 2170 MHz 2490 - 2690 MHz
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 3 Issue: 2013-04-22(S)