Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    LT-Inclibus Tiltmeter Array

    Uploaded by

    Pamela Roque Rodrigo
    The LT-Inclibus is a digital inclinometer system that monitors tilting along a line using a chain of gauges connected via RS485. It consists of fiberglass rods with two-axis sensors spaced at 1m intervals. Customers can use any RS485/Modbus compatible device as a logger. It measures inclination, temperature, and voltage to provide calibrated data on tilting, suitable for monitoring structures like embankments, slopes, tanks and bridges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LT-Inclibus Tiltmeter Array

    Uploaded by

    Pamela Roque Rodrigo
    41 views4 pages
    The LT-Inclibus is a digital inclinometer system that monitors tilting along a line using a chain of gauges connected via RS485. It consists of fiberglass rods with two-axis sensors spaced at 1m intervals. Customers can use any RS485/Modbus compatible device as a logger. It measures inclination, temperature, and voltage to provide calibrated data on tilting, suitable for monitoring structures like embankments, slopes, tanks and bridges.

    Original Title

    LT-Inclibus_tiltmeter_array

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The LT-Inclibus is a digital inclinometer system that monitors tilting along a line using a chain of gauges connected via RS485. It consists of fiberglass rods with two-axis sensors spaced at 1m intervals. Customers can use any RS485/Modbus compatible device as a logger. It measures inclination, temperature, and voltage to provide calibrated data on tilting, suitable for monitoring structures like embankments, slopes, tanks and bridges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views4 pages

    LT-Inclibus Tiltmeter Array

    Uploaded by

    Pamela Roque Rodrigo
    The LT-Inclibus is a digital inclinometer system that monitors tilting along a line using a chain of gauges connected via RS485. It consists of fiberglass rods with two-axis sensors spaced at 1m intervals. Customers can use any RS485/Modbus compatible device as a logger. It measures inclination, temperature, and voltage to provide calibrated data on tilting, suitable for monitoring structures like embankments, slopes, tanks and bridges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Instrument Datasheet

    LT-Inclibus
    Digital Inclinometer
    DES CR IP T I ON

    The LT-Inclibus gauge is able to monitor local tilting mechanical joints, while the gauges are connected in
    along a line, assuring the alignment, distance and a RS485 chain. The logger can read both the
    measuring axis orientation between the gauges. inclination of the two axis in engineering units and
    The standard segment is composed by a 2m fibre the internal sensor diagnostics for each measuring
    glass rod with two biaxial waterproof gauges, 1m point (temperature and voltage supply).
    spaced.
    Customers can use any electronic device compatible
    The chain of LT-Inclibus can be installed within a with RS485 and Modbus RTU protocol as a logger.
    borehole, mounted to a surface of a structure, laid The LT-Inclibus gives a complete and transparent
    along a trench or buried in a concrete mass. It is array of data in engineering unit, as a result.
    possible to have one or four gauges on the 2m rod
    upon request. The rods are connected through

    A P P L IC AT I ON S FE AT U RES

    ✔ Embankments ✔ Light and flexible array


    ✔ Unstable slopes ✔ Simple and fast to install
    ✔ Settlements ✔ Number of measuring points customisable
    ✔ LNG tanks ✔ Each measuring point is individually calibrated
    following high level procedures
    ✔ Deep excavations
    ✔ Tunnelling
    ✔ Dam slope stability
    ✔ Deck bridges deformation
    TECH N IC A L S PECI F I C ATI ONS

    PRODUCT CODE 0LTIBV20102 0LTIBH20102

    (1)
    TILTMETER

    Application Vertical, biaxial Horizontal, biaxial

    Measurement principle TRIAXIAL MEMS inclinometer TRIAXIAL MEMS inclinometer


    2 axis used 2 axis used

    Measuring range standard ±10° (other ranges available on request)

    Sensor resolution 0.0002°

    Sensor repeatability <±0.008°

    Sensitivity (2) see the Calibration Report

    Sensor accuracy
    Lin. MPE(3) <±0.10% F.S.
    Pol. MPE(3) <±0.05% F.S.

    Sensor 24h stability (4) < ±0.1mm/m

    Sensor mechanical bandwidth 10 Hz

    Sensor offset temperaturedependancy A axis: <±0.01°/°C A axis: <±0.004°/°C


    B axis: <±0.004°/°C B axis: <±0.004°/°C

    Temperature operating range from -30°C to +70°C

    TEMPERATURE SENSOR (5) Embedded on electronic board

    Measuring range - 40°C to +125°C

    Accuracy ±1°C with temperaturerange -10°C to +85°C

    SUPPLY VOLTAGE MONITOR (5) Embedded on electronic board

    Measuring range 0 to 36 V

    Accuracy ±5% FS

    ELECTRICAL SPECIFICATIONS

    Signal output RS485 non-optoisolatedcommunication with MODBUS RTU protocol (6)

    Maximum reading frequency 2.5 sec for each reading (7)

    Power supply from 8 to 28 Vdc

    Average consumption 3.2 mA @ 24 Vdc, 4.6 mA @ 12 Vdc

    Max cable length to logger 1000 m

    (1) Technical characteristics are referred to ±10° measuring range


    (2) Sensitivity is a specific parameter different for every gauge. The sensitivity is calculated during gauge calibration test and inserted into the Calibration
    Report.
    (3) MPE is the MaximumPermitted Error on the measuring range (FSR). In the Calibration Report, the accuracies of the gauge are calculated using both linear
    regression (≤ Lin. MPE) and polynomial correction (≤ Pol. MPE)
    (4) Stability calculated as difference after a 24 h period under repeatability conditions (ISO18674-3).
    (5) These sensors are installed on the internal electronic board for sensor diagnostics.
    (6) RS485 not-optoisolated Modbus communication with RTU Protocol. Legacy mode is not supported by this instrument Default output is sen α, other units
    available are degree, mm/mand inch/feet (to be requested at order).
    (7) Faster reading are available under request, but the performance of the system will be lower due to the increment of noises.
    P H YS I C A L FE ATURES

    GAUGE FIBERGLASS ROD

    Material polycarbonate stainless steel joint tips and fibre-glass rod

    IP class IP68 up to 1.0 MPa (2.0 MPa on request) --

    Dimensions 145mm x 35mm x 35mm 2m length, rod Ø 7 mm

    Weight 200 gr 200 gr

    145 mm fibreglass rod Ø 7mm gauge section 35x35mm

    500 mm 1000 mm 500 mm

    2000 mm

    MEASURING AXIS IN HORIZONTAL APPLICATION

    A-channel B-channel

    MEASURING AXIS IN VERTICAL APPLICATION

    A-channel B-channel
    A C CE S S O RI ES AN D SPARE PARTS

    Available in different lengths (2m, 5m, 10m, 15m), it is composed by a


    CABLE WITH CONNECTOR
    signal cable with IP68 connector to link the nearest gauge to local logger,
    0S400HD00MT
    wireless node or junction box.

    TERMINATION RESISTANCE Resistance ending device with connector, needed to close every digital IPI
    0ETERMRESI0 chain. The value of resistor depends on the layout of the system.

    2M FG ELONGATION ROD Fibre glass rod for chain elongation, 2m length, including mechanical joints
    0LTIBROD020 and signal cable with connectors assembled at factory.

    DIGITAL CABLE
    LSZH cable for connecting digital gauge chains to OMNIAlog data logger.
    0WE606IPDZH

    Kit composed by one 120 Ohm, two 240 Ohm, three 360 Ohm and four 480
    RESISTANCES KIT (SPARE) Ohm resistance ending devices. Each one has a M12 5-pin connector for
    0ERESIKIT00 linking to digital gauges. Check the compatibility with old digital gauges,
    consulting your Sales Representative.

    Logger
    Cable with Termination
    connector resistance

    Signal Mechanical Fibreglass Signal LT INCLIBUS Gauge Foundation


    cable joint rod connectors segment concrete slab

    GEOMOTION.COM.AU | INFO@GEOMOTION.COM.AU

    You might also like