Metal Partion Wall

Group members:
Mugdha
Diksha
Vishwa
tanishq
CONTENT
• Introduction of material
• Properties
• Appearance/Types
• Application/Methods
• Advantages & Disadvantages
• Examples (Photographs) Case
study
• Process of Preparation
• Clips (1 min)
• Combination with other materials
• Latest trends
• Sheet /Material Size
• Sheet/Material Thickness
• Specification Details
• A metal partition wall may be defined as a wall or division
made up of Metal and provided for the purpose of dividing
one room or portion of a room from another. Metal partition
walls are designed as non-load bearing walls. It may be of
folding, collapsible or fixed type of wall.
• Two functions of metal partitions are:

• To divide buildings into suitably sized rooms, halls, etc.
• They may also be required to support floor and ceiling joists.
Metal Partition Properties
• Metal lath partition wall are thin, strong, durable and

considerably fire resistant.
Versions of our logo can be used to match a variety of
• Metal lath partition walls are constructed by placing 2cm or materials and applications. Make sure to apply them
2.5cm channels vertically (called studs) and fixing metal lath to appropriately.
it on one side.
Advantages • Disadvantages
• Designed for temporary uses. • Changes little with temperature.
• Easy to install and remove. • Prone to corrosion.
• Good heat resistant. • Can get damaged.
• High mechanical strength.

• Metal lath partition walls are constructed by placing 2cm or 2.5cm channels vertically (called studs) and fixing metal lath to it
on one side.
• Metal stud sizes vary in width, thickness, and depth. It’s important to consider the thickness of the frame, the size of the
webbing, and the size of the flange.
• In general, the thicker the metal, the more heavy-duty the project. This is because heavy-duty projects require a stronger
foundation.
• Here are some examples of metal stud sizes as it relates to the thickness:
• 26 gauge (0.551 mils)
• 24 gauge (0.701 mils)
Appearances
• Metal partitions or stainless steel partitions have a smooth
finish.
• They can be coated with Glossy or Matte finish paints.
• Colors- Golden, Champagne Gold, Rose Golden, Dusk, Azure

etc..
Combination with other materials
Metal and wood-
Metal partition can be combined with wooden panelings to give a aesthetic appearance.
It is used to provide Privacy and also helps for insulation.

Metal and glass-
• Metal partitions with glass can be used to divide a space while making it look bigger and open.
• Its good for getting natural light whereas making the space feel open and welcoming.
• Has a more formal look and good for insulation.

Sheets and thickness
Metal partition thickness-
Thickness of partition- 2mm - 7mm
we move into 2022 we're seeing a trend for metal partitions is CNC cutting metal partitions and
combining metal partitions with wood and glass.
Metal partition
wall with
aluminum
• Metal partition wall with
aluminum is the new trend of
2022, with the use of CNC
cutting technology you can
customize any design according
to your preference.
• You can have metal partitions
with Gold, Matte Black and white
shades.
Metal partition
wall with wood
and cnc cutting.
• Metal partition wall with wood and

use of CNC cutting technology is
another new trend in metal
partitions.
Circular glass
and metal
partitions
• Circular glass and metal

partitions is another
popular trend of 2022,
circular pattern justifies a
sense of completion,
wholeness and harmony.
• It’s a new way of having

translucent and semi
transparent metal
partitions.
metal
partitions
With fabrics.
• Using colorful fabrics

inside the metal frame
gives a very elegant and
aesthetic sense of design
and this type of metal
partition wall is one of
the trend in 2022.
L
I
V
E
C
A
S
E
S
• Here metal partition is used to separate the living room with the
T
staircase. U
• It is designed in a such a way that this partition wall acts as a
support safety also for the staircase. D
• This is a cnc cutting stainless steel golden colour metal partition
Y
wall.
PREFORATED METAL PANELS WELDED MESH METAL PARTITION STAINLESS STEEL CNC METAL PARTITIONS
ALUMINIUM BRONZE POLISHED CUSTOMIZED

WOOD AND METAL SHELF CUM PARTITION METAL PARTITIONS FOR PUBLIC WASHROOMS
PARTITIONS
APPLICATION OF
METAL PARTION WALL
 Partition walls used to divide the interior
space of a building.
 To provide privacy to the building
occupants.
 Partition walls also used to make private
cabins.
 It is used to make a shower partition.
 It is used to make reception counters.
PROCESS OF
PREPARATION OF
METAL PARTION WALL
Step 1: Defining The Position Of Metal Stud
Wall
First of all, we need to define the position of our
metal stud wall. For this, take the measurement
of the partition position. Then put a pencil mark
on the ground. At the opposite end, do the
same.
Step 2: Fixing U Track On The Floor
Secondly, between those two marks, indicate the
position of the U track that will be fixed on the
floor. Next, note the length of the U track on the
back. If necessary, use a tin snips to cut down
one side. Afterwards, depending on the floor you
have, use appropriate screws to securely fix the
track down to the floor.
PROCESS OF
PREPARATION OF
METAL PARTION WALL
Step 3: Implementing C Stud On The Wall
Thirdly, take the measurement from floor to
ceiling. After that, cut your C Stud to
length, maximum 5 millimeters shorter than the
floor to ceiling height. Put it into your U track
and place it against the wall surface. Select
appropriated screws to the type of background
you have (timber, concrete , brick and fix the C
stud to the wall.
Step 4: Installing U Track On The Ceiling
Fourthly, over the stud that we have just fixed
against the wall, put into position a ceiling track.
Then, use another stud caught to length and
place it into the top and bottom track. Fix the U
track to the ceiling. Where the stud stops is the
end of the partition. Meaning that it is where we
need to fix (top and bottom).
PROCESS OF
PREPARATION OF
METAL PARTION WALL
Attachment of Plasterboards in The Metal
Frame Partition
Step 5: Placing Plasterboard in Partition
Fifthly, we make sure that the gypsum plates we
will use are cut to size. To avoid the contact with
the ground (due to the fact that gypsum can
absorb water and moisture), we tight up the
boards against the ceiling by lifting them up from
the floor.
Step 6: Insulating The Partition Wall
Last but not least, to improve the acoustic and
thermal performance of the partition, we highly
recommend to INSULATE your partition wall.
PROCESS OF
PREPARATION OF
METAL PARTION WALL
Step 7: Jointing and Finishing Gypsum Boards

Once you have finished, you can start the
jointing of gypsum boards.
SMALL METAL PARTITION INSTALLATION CLIP
THANKYOU
-DR. RUTUJA DESHMUKH
-AR. PAYAL GULHANE
Diksha
Properties
Advantages & Disadvantages
Material Size
Mugdha
Appearance/Type
Combination with other materials Sheet/Material
Thickness
Tanishq
Latest trends
Examples (Photographs)
Specification Details
Vishwa
Application/Methods
Process of Preparation
Clips (1 min)

Metal Partion Wall

Uploaded by

Copyright:

Available Formats

Metal Partion Wall

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metal Partion Wall

Uploaded by

Copyright:

Available Formats

Group members:

• Two functions of metal partitions are:

• Metal lath partition wall are thin, strong, durable and

• Designed for temporary uses. • Changes little with temperature.

• Easy to install and remove. • Prone to corrosion.

• Good heat resistant. • Can get damaged.

• High mechanical strength.

• They can be coated with Glossy or Matte finish paints.

• Colors- Golden, Champagne Gold, Rose Golden, Dusk, Azure

It is used to provide Privacy and also helps for insulation.

• Has a more formal look and good for insulation.

• Metal partition wall with wood and

• Circular glass and metal

• It’s a new way of having

• Using colorful fabrics

ALUMINIUM BRONZE POLISHED CUSTOMIZED

Step 7: Jointing and Finishing Gypsum Boards

You might also like