The document provides installation and operation instructions for JingBiao Automation's EX1S series micro programmable controllers. It outlines safety precautions, installation methods, general specifications, hardware features, PLC models and types, performance specifications, and RS485 communication settings. The EX1S series PLCs can be used for industrial control applications and support programming via RS-232 and RS-485 ports.
The document provides installation and operation instructions for JingBiao Automation's EX1S series micro programmable controllers. It outlines safety precautions, installation methods, general specifications, hardware features, PLC models and types, performance specifications, and RS485 communication settings. The EX1S series PLCs can be used for industrial control applications and support programming via RS-232 and RS-485 ports.
The document provides installation and operation instructions for JingBiao Automation's EX1S series micro programmable controllers. It outlines safety precautions, installation methods, general specifications, hardware features, PLC models and types, performance specifications, and RS485 communication settings. The EX1S series PLCs can be used for industrial control applications and support programming via RS-232 and RS-485 ports.
The document provides installation and operation instructions for JingBiao Automation's EX1S series micro programmable controllers. It outlines safety precautions, installation methods, general specifications, hardware features, PLC models and types, performance specifications, and RS485 communication settings. The EX1S series PLCs can be used for industrial control applications and support programming via RS-232 and RS-485 ports.
Installation Manual 【Safety Precautions】 EX1S series PLC can be used in industrial control applications,please follow the requirements of manual to wire.
Maybe there is potentially hazardous, if not comply, may cause serious or fatal injuries
there is potentially hazardous, if not comply, may cause moderate Injuries, or cause serious damage to products.
Absolutely prohibited operations, if not comply, could result in damage to the product, or even malfunction can not be used.
【Installation methods】
<1> Do not use the following environments
1.Humid environment,dew environment 2.Crrosive gases or dust environment 3.water, chemicals and other conductive liquid splashes into place
<2>Wiring 1.Avoid close to high-voltage, high-current power supply or cable 2.Do not over-pressure power: be sure the polarity is correct 3.Communication cable is connected correctly.
1. General Specifications Items Specification Insulation voltage above DC 500V 2MΩ
Anti-noise 1000V 1uS pulse 1 minute
Port 1 RS-232, connect PC, HMI programming or debugging
RS-485, HMI programming or debugging, support modbus Rtu Agreement and port 2 Mitsubishi Agreement Installation Screw or rail mounting
Grounding Third type grounding (not with strong power system common grounding)
JingBiao Automation Co., Ltd. Input Voltage DC24V Electrical Voltage range DC22V~DC26V Characteristics Current consumption Less than 260mA
Allow power failure 10ms or less (actual power failure is less than 1s) Electrical Characteristics Anti-voltage surge AC1000V, 10mA, less than one minute (between signal and ground) Insulation resistance DC500V, 10MΩ or more (between signal and ground) Operating temperature 0 ℃ ~ 50 ℃ Storage Temperature -20 ℃ ~ 60 ℃ Environment Operating humidity 10% RH ~ 90% RH (without condensation) ImmunityAbility Interference voltage: 1500Vp-p pulse period: 1us Duration: 1 minute Air Non-corrosive gases
3. PLC model and machine types
name and model Inputs points Output points Analog Input Analog Output
JingBiao Automation Co., Ltd. b6 (0,1,0,0):600 (1,0,0,0):9,600 b7 (0,1,0,1):1,200 (1,0,0,1)19,200 (0,1,1,0):2,400 Start b8※1 character NO Has (D8124) initial value:STX (02H) Termination b9※1 character NO Has (D8125) initial value:ETX (03H) b11,b10 (0,0):NO<RS-232C Interface> No sequence (0,1):Normal mode<RS-232C Interface> b10 (1.0):Interlock Mode<RS-232C Interface>※ Control line b11 (1,1): Modem mode<RS-232C Interface,RS-485Interface>※ Computer link b11,b10 (0,0) RS-485Interface communication※4 (1,0) RS-232CInterface
b12 Can not be used
b13※2 And parity Without attaching Attaching b14※2 Protocol Do not use Using Control b15※2 sequence Mode1 Mode4 Note: Unspecified Please follow Mitsubishi format uses 7. RS485 port Modbus master Description:
Note: 1.If the program has RS instruction, RS485 interface automatically configured as master mode; 2. setting master mode is as same as slave mode configured RS485 communication formats;
JingBiao Automation Co., Ltd. 3. If the M8125 bit is ON, it is RS485 modbus mode, Otherwise it is Mitsubishi free format;
8. PLC digital and analog input specifications:
【IO digital input characteristics】 【AD analog inputs characteristics】 Input signal voltage DC24V±10% DC0~5V 、 0~10V 、 Analog input signal Input signal current 7mA / DC24V DC0～20mA、4 ～20mA EX1S-22-4AD 4-channel Input ON current more than 5mA or Number of Channels analog input Input OFF current Less than 1mA Integrated accuracy 0.5% Input or NPN open- Input Model Type collector transistor Maximum Input Range DC0～40mA DC15V Fully isolated Circuit insulation Analog Input Protection Instant suppression diode optocoupler Input response time 10msec Resolution / Speed 4096(12Bit) / 10 msec Input motion display LED lit when input ON Analog input register CH1:D803～ CH3:D8033 【NPN input wiring diagram】 【AD voltage, current input wiring】
9.PLC relays, transistors, analog output specifications:
【Digital relay output characteristics】【Digital transistor output characteristics】 【 Analog Output
Characteristics】 Output Transistors, non- 0～5V、0～ Relay, dry contact Output Type Type contact Output 10V、0～ Circuit Mechanical Circuit Photocoupler Signal 20mA、4～ insulation Insulation insulation insulation 20mA Action Action Number of EX1S- LED indicator LED indicator Knowledge Knowledge Channels 20MRT4ADDA
JingBiao Automation Co., Ltd. two-channel output Integrated resistive load 3A resistive load 1A 0.5% accuracy Maximum Inductive load Inductive load Output 10V or 20MA Max Load 80VA Max Load 12W/DC24V Range Analog Lamp Instant Lamp load 100W Output load1.5W/DC24V suppression diode Protection Output Output Resolution / 4096(12Bit) / 10 response 10msec response Within 0.2msec Speed msec time time Output Output CH1:D8037 LED lit when LED lit when output Output operation operation output is ON is ON register ～ CH2:D8038 Show Show
