GOVERNMENT OF INDIA

MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP

DIRECTORATE GENERAL OF TRAINING

COMPETENCY BASED CURRICULUM

MECHANIC TRACTOR
(Duration: One Year)
Revised in July 2022
CRAFTSMEN TRAINING SCHEME (CTS)
NSQF LEVEL- 3

SECTOR – AUTOMOTIVE
MECHANIC TRACTOR
(Engineering Trade)

(Revised in July 2022)

Version: 2.0

CRAFTSMEN TRAINING SCHEME (CTS)

NSQF LEVEL- 3

Developed By

Ministry of Skill Development and Entrepreneurship

Directorate General of Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-81, Sector-V, Salt Lake City,
Kolkata – 700 091
www.cstaricalcutta.gov.in
 CONTENTS

S No. Topics Page No.

1. Course Information 1

2. Training System 2

3. Job Role 6

4. General Information 7

5. Learning Outcome 9

6. Assessment Criteria 11

7. Trade Syllabus 18

Annexure I (List of Trade Tools & Equipment) 38

Annexure II (List of Trade experts) 47

Mechanic Tractor
1. COURSE INFORMATION

During the one-year duration a candidate is trained on subjects Professional Skill,

Professional Knowledge, and Employability Skill related to job role. In addition to this a
candidate is entrusted to make/do project work and extra-curricular activities to build up
confidence. The practical skills are imparted in simple to complex manner & simultaneously
theory subject is taught in the same fashion to apply cognitive knowledge while executing task.
The broad components covered in this course are as below: -

The learner is trained on various skills like, make choices to carry out marking of the
components for basic fitting operations in the work shop; perform precision measurements on
the components and compare parameters with specifications used in automotive work shop
practices; use different types of tools and work shop equipment in the work shop; use different
types of fastening and locking devices in a vehicle; perform basic fitting operations used in the
work shop practices and inspection of dimensions etc. The trainee will learn to produce sheet
metal components using various sheet metal operations; inspect the auto component using
Nondestructive testing methods; manufacture components with different types of welding
processes in the given job; identify the hydraulic and pneumatic components in a vehicle;
construct electrical circuits and test its parameters by using electrical measuring instruments
and perform basic electrical testing in a vehicle.

The learner also learns to demonstrate Major Assemblies of Tractor; overhaul Diesel
Engine of Tractor; perform servicing of Cooling and Lubrication system of Tractor; service Intake
and Exhaust System of Tractor; service Fuel Feed System of Tractor; overhaul Clutch and
Gearbox of Tractor in a workshop; overhaul Differential and PTO Unit of Tractor in the
workshop; overhaul Steering System of Tractor in the workshop. He/she will practice repair
works of Wheels and Tyres of Tractor in the Workshop; overhauling of Brake system of Tractor
in the workshop; overhauling of Major Assemblies of Power Tiller; overhauling of Implements
of Tractor; overhauling of Charging and Starting System of Tractor and carryout Field Operation.

1
Mechanic Tractor

2. TRAINING SYSTEM

2.1 GENERAL

The Directorate General of Training (DGT) under Ministry of Skill Development &
Entrepreneurship offers a range of vocational training courses catering to the need of different
sectors of economy/ Labour market. The vocational training programmes are delivered under
the aegis of Directorate General of Training (DGT). Craftsman Training Scheme (CTS) with
variants and Apprenticeship Training Scheme (ATS) are two pioneer schemes of DGT for
strengthening vocational training.

Mechanic Tractor trade under CTS is delivered nationwide through network of ITIs. The
course is of one-year duration. It mainly consists of Domain area and Core area. The Domain
area (Trade Theory & Practical) imparts professional skills and knowledge, while Core area
(Employability Skills) impart requisite core skills, knowledge and life skills. After passing out the
training program, the trainee is awarded National Trade Certificate (NTC) by DGT which is
recognized worldwide.

Candidates need broadly to demonstrate that they are able to:

 Read & interpret technical parameters/document, plan and organize work processes,
identify necessary materials and tools;
 Perform task with due consideration to safety rules, accident prevention regulations and
environmental protection stipulations;
 Apply professional skill, knowledge, core skills & employability skills while performing
jobs.
 Check the job/assembly as per drawing for functioning, identify and rectify errors in
job/assembly.
 Document the technical parameters related to the task undertaken.

2.2 PROGRESSION PATHWAYS

 Can join industry as Technician and will progress further as Senior Technician, Supervisor
and can rise up to the level of Manager.
 Can become Entrepreneur in the related field.
 Can join Apprenticeship programme in different types of industries leading to a National
Apprenticeship certificate (NAC).

2
Mechanic Tractor

 Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in
ITIs.
 Can join various industries of the relevant field.
 Can become an Entrepreneur.
 Can join Advanced Diploma (Vocational) courses under DGT as applicable.

2.3 COURSE STRUCTURE

Table below depicts the distribution of training hours across various course elements
during a period of one year: -

Notional Training Hours

S No. Course Element
1st Year
1 Professional Skill (Trade Practical) 840
2 Professional Knowledge (Trade Theory) 240
3 Employability Skills 120

Total 1200

150 hours of mandatory OJT (On the Job Training) of industry opportunity not available
the group project is mandatory.

4 On the Job Training (OJT)/ Group Project 150

2.4 ASSESSMENT & CERTIFICATION

The trainee will be tested for his skill, knowledge and attitude during the period of course
through formative assessment and at the end of the training programme through summative
assessment as notified by the DGT from time to time.

a) The Continuous Assessment (Internal) during the period of training will be done by
Formative Assessment Method by testing for assessment criteria listed against learning
outcomes. The training institute has to maintain an individual trainee portfolio as detailed in
assessment guideline. The marks of internal assessment will be as per the formative assessment
template provided on www.bharatskills.gov.in

b) The final assessment will be in the form of summative assessment. The All India Trade Test
for awarding NTC will be conducted by Controller of examinations, DGT as per the guidelines.
The pattern and marking structure is being notified by DGT from time to time. The learning
outcome and assessment criteria will be the basis for setting question papers for final

3
Mechanic Tractor

assessment. The examiner during final examination will also check the individual trainee’s
profile as detailed in assessment guideline before giving marks for practical examination.
2.4.1 PASS REGULATION

For the purposes of determining the overall result, weightage of 100% is applied for six months
and one-year duration courses and 50% weightage is applied to each examination for two years
courses. The minimum pass percent for Trade Practical and Formative assessment is 60% & for
all other subjects is 33%. There will be no Grace marks.

2.4.2 ASSESSMENT GUIDELINE

Appropriate arrangements should be made to ensure that there will be no artificial

barriers to assessment. The nature of special needs should be taken into account while
undertaking the assessment. Due consideration should be given while assessing for teamwork,
avoidance/reduction of scrap/wastage and disposal of scrap/waste as per procedure,
behavioral attitude, sensitivity to the environment and regularity in training. The sensitivity
towards OSHE and self-learning attitude are to be considered while assessing competency.

Assessment will be evidence based comprising some of the following:

 Job carried out in labs/workshop

 Record book/ daily diary
 Answer sheet of assessment
 Viva-voce
 Progress chart
 Attendance and punctuality
 Assignment
 Project work
 Computer based multiple choice question examination
 Practical Examination

Evidences and records of internal (Formative) assessments to be preserved until

forthcoming examination for audit and verification by examining body. The following marking
pattern to be adopted for formative assessment:

Performance Level Evidence

(a) Mark in the range of 60%-75% to be allotted during assessment
For performance in this grade, the candidate  Demonstration of good skill in the use of
should produce work which demonstrates hand tools, machine tools and workshop
attainment of an acceptable standard of equipment.

4
Mechanic Tractor

craftsmanship with occasional guidance, and  60-70% accuracy achieved while undertaking
due regard for safety procedures and different work with those demanded by the
practices component/job.
 A fairly good level of neatness and
consistency in the finish.
 Occasional support in completing the
project/job.

(b) Mark in the range of 75%-90% to be allotted during assessment

For this grade, a candidate should produce  Good skill levels in the use of hand tools,
work which demonstrates attainment of a machine tools and workshop equipment.
reasonable standard of craftsmanship, with  70-80% accuracy achieved while undertaking
little guidance, and regard for safety different work with those demanded by the
procedures and practices component/job.
 A good level of neatness and consistency in
the finish.
 Little support in completing the project/job.

(c) Mark in the range of more than 90% to be allotted during assessment
For performance in this grade, the candidate,  High skill levels in the use of hand tools,
with minimal or no support in organization machine tools and workshop equipment.
and execution and with due regard for safety  Above 80% accuracy achieved while
procedures and practices, has produced work undertaking different work with those
which demonstrates attainment of a high demanded by the component/job.
standard of craftsmanship.  A high level of neatness and consistency in
the finish.
 Minimal or no support in completing the
project.

5
Mechanic Tractor
3. JOB ROLE

Tractor Mechanic; repairs and overhauls tractors by various mechanical processes for
agriculture, constructional and other heavy duties. Examines and drives vehicle on road or runs
engine in stationary position to diagnose troubles and defects. Dismantles part or complete
engine or unit according to nature of defects. Repairs or replaces defective parts, reassembles
them with prescribed settings, clearances, timings and adjustments by further tooling as
necessary and ensures accuracy of fit. Installs assembled or repaired engine securely in position
on vehicle chassis and connects oil and fuel lines, controls and other accessories. Starts engine
and observes performance for any unusual noise and knocks. Adjusts carburettor, fuel pump
(Carburettor for petrol engine and fuel pump for diesel engine), sets clearance between tappets
and valves, tunes engine, adjusts brakes, makes electrical connections and performs other tasks
to ensure stipulated performance. May repair and overhaul electric motors, fuel pump,
carburettor etc. of engine. May weld braze or solder parts. May repair other agricultural
machinery for ploughing, levelling, harvesting etc. and be designated as Mechanic, Agricultural
Machines.

Reference NCO-2015:

(i) 7231.0300– Tractor Mechanic

Reference NOS:

(I) AGR/N9421,
(II) AGR/N 9422,
(III) AGR/N 9424,
(IV) AGR/N 9425,
(V) AGR/N 9426,
(VI) AGR/N 9427,
(VII) AGR/N 9428
(VIII) AGR/N9429,
(IX) AGR/N 9450,
(X) AGR/N 9451,
(XI) AGR/N 1129,
(XII) AGR/N 1126,
(XIII) AGR/N 1130,
(XIV) AGR/N 1128,
(XV) AGR/N 1108,
(XVI) AGR/N 1119

6
Mechanic Tractor
4. GENERAL INFORMATION

Name of the Trade MECHANIC TRACTOR

Trade Code DGT/1028

NCO - 2015 7231.0300

AGR/N9421, AGR/N 9422, AGR/N 9424, AGR/N 9425, AGR/N
9426, AGR/N 9427, AGR/N 9428 AGR/N9429, AGR/N 9450,
NOS Covered
AGR/N 9451, AGR/N 1129, AGR/N 1126, AGR/N 1130, AGR/N
1128, AGR/N 1108, AGR/N 1119
NSQF Level Level – 3
Duration of Craftsmen
One year (1200 hours + 150 hours OJT/Group Project)
Training
Passed 10th class examination with Science and Mathematics or
Entry Qualification
with vocational subject in same sector or its equivalent.

Minimum Age 14 years as on first day of academic session.

Eligibility for PwD LD, LC, DW, AA, LV, DEAF

Unit Strength (No. Of Student) 20 (There is no separate provision of supernumerary seats)

Space norms 210 Sq. m (Including Parking room)

Power norms 4.8 KW

Instructors Qualification for:
1. Mechanic Tractor Trade B.Voc/Degree in Agriculture Engineering/ Automobile/
Mechanical Engg. (with specialization in Automobile) from
AICTE/UGC recognized Engineering College/ university with one-
year experience in the relevant field.
OR
03 years Diploma in Agriculture Engineering/ Automobile/
Mechanical Engg. (with specialization in (Automobile) from
AICTE/ recognized board of technical education or relevant
Advanced Diploma (Vocational) from DGT with two years’
experience in the relevant field.
OR
NTC/NAC passed in the trade of “Mechanic Tractor /Mechanic
Agricultural Machinery)" with three years’ experience in the
relevant field.

7
Mechanic Tractor

Essential Qualification:
Relevant National Craft Instructor Certificate (NCIC) in any of the
variants under DGT.

NOTE: - Out of two Instructors required for the unit of 2(1+1),

one must have Degree/Diploma and other must have NTC/NAC
qualifications. However, both of them must possess NCIC in any
of its variants.
2. Employability Skill MBA/ BBA / Any Graduate/ Diploma in any discipline with Two
years’ experience with short term ToT Course in Employability
Skills from DGT institutes.
(Must have studied English/ Communication Skills and Basic
Computer at 12th / Diploma level and above)

OR
Existing Social Studies Instructors in ITIs with short term ToT
Course in Employability Skills from DGT institutes.

3. Minimum Age for 21 Years

Instructor
List of Tools and Equipment As per Annexure – I

8
Mechanic Tractor
5. LEARNING OUTCOME

Learning outcomes are a reflection of total competencies of a trainee and assessment

will be carried out as per the assessment criteria.

5.1 LEARNING OUTCOMES

1. Make choices to carry out marking of the components for basic fitting operations in the
workshop following safety precautions.(NOS:AGR/N9421)
2. Perform precision measurements on the components in automotive workshop practices
(NOS:AGR/N9422)
3. Use different types of fastening and locking devices in a vehicle. (NOS:AGR/N9423)
4. Use cutting tools in the workshop, following safety precautions while grinding.
(NOS:AGR/N9424)
5. Use different types of tools and workshop equipment in the workshop.
(NOS:AGR/N1126)
6. Perform basic fitting operations used in the workshop practices and inspection of
dimensions. (NOS:AGR/N9425)
7. Produce sheet metal components using various sheet metal operations.
(NOS:AGR/N9426)
8. Construct electrical circuits and test its parameters by using electrical measuring
instruments. (NOS:AGR/N9427)
9. Perform basic electrical testing in a vehicle. (NOS:AGR/N1129)
10. Perform battery testing and charging operations. (NOS:AGR/N1129)
11. Construct basic electronic circuits and testing. (NOS:AGR/N9428)
12. Manufacture components with different types of welding processes in the given job.
(NOS:AGR/N9429)
13. Inspect the auto component using Non-destructive testing methods. (NOS:AGR/N1126)
14. Identify the hydraulic and pneumatic components in a vehicle. (NOS:AGR/N1129)
15. Demonstrate Major Assemblies of Tractor. (NOS:AGR/N1130)
16. Overhaul Diesel Engine of Tractor. (NOS:AGR/N1128)
17. Perform servicing of Cooling and Lubrication system of Tractor in a workshop.
(NOS:AGR/N1128)
18. Service Intake and Exhaust System of Tractor in a workshop. (NOS:AGR/N1128)
19. Service Fuel Feed System of Tractor in a workshop. (NOS:AGR/N1128)
20. Overhaul Clutch and Gearbox of Tractor in a workshop. (NOS:AGR/N1129)
21. Overhaul Differential and PTO Unit of Tractor in the workshop. (NOS:AGR/N1129)
22. Overhaul Steering System of Tractor in the workshop. (NOS:AGR/N1129)
23. Carryout Repair of Wheels and Tyres of Tractor in the Workshop. (NOS:AGR/N1129)

9
Mechanic Tractor

24. Overhaul Brake system of Tractor in the workshop. (NOS:AGR/N1129)

25. Overhaul Major Assemblies of Power Tiller and carryout Field Operation.
(NOS:AGR/N1108)
26. Overhaul Implements of Tractor. (NOS:AGR/N1119)
27. Overhaul Charging and Starting System of Tractor. (NOS:AGR/N1129)
28. Read and apply engineering drawing for different application in the field of
work(NOS:AGR/N9450)
29. Demonstrate basic mathematical concept and principles to perform practical
operations. Understand and explain basic science in the field of study.
(NOS:AGR/N9451)

10
Mechanic Tractor

6. ASSESSMENT CRITERIA

LEARNING OUTCOMES ASSESSMENT CRITERIA

1. Make choices to carry out Mark according to drawings by using marking tools on the
marking of the components for work pieces.
basic fitting operations in the Chip the job in accordance with standard specifications and
workshop following safety tolerances.
precautions. (NOS:AGR/N9421) Measure all dimensions in accordance with standard
specifications and tolerances.

2. Perform precision Measure all dimensions in accordance with standard

measurements on the specifications and tolerances by using precision measuring
components in automotive instruments.
workshop Measure the parameters related with the vehicle components
practices(NOS:AGR/N9422) for its effective operation by matching with manufacturer's
specification using different gauges.

3. Use of different types of Identify the different type of fasteners and locking devices
fastening and locking devices used in the vehicle.
in a vehicle. Use different types of locking devices correctly.
(NOS:AGR/N9423) Specify the bolt and nut threads.
Practice on removing the damaged studs and bolts.

4. Use cutting tools in the Identify cutting tool materials and their application.
workshop, following safety Plan and grind cutting and marking tools.
precautions while grinding. Measure the tool angles with gauges.
(NOS:AGR/N9424)

5. Use different types Identify the different types of hand and power tools used in
of tools and work the automotive workshop.
shop equipment in the Operate various tools and workshop equipment.
workshop. (NOS:AGR/N1126)

6. Perform basic fitting Mark according to drawing by using marking tools on flat
operations used in the surfaces.
workshop practices and Hack saw and file the job using different methods and
inspection of dimensions. perform in accordance with the standard specifications and

11
Mechanic Tractor

(NOS:AGR/N9425) tolerances.
Drilling and reaming on flat surfaces.
Identify and use hand tools for internal and external threading
with taps and dies.
Measure all dimensions in accordance with standard
specification and tolerances.

7. Produce sheet metal Ascertain and select tools and materials for the job and
components using various make this available for use in a timely manner.
sheet metal operations. Plan and organize the work for different types of sheet metal
(NOS:AGR/N9426) operations.
Mark according to drawing by using marking tools on flat
surfaces.
Produce components as per the drawing.

8. Construct electrical circuits Plan and organize the work for basic electrical operations.
and test its parameters by Select the tools, instruments and materials required to do the
using electrical measuring job.
instruments. Comply with safety rules when performing the basicelectrical
(NOS:AGR/N9427) operations.
Perform electrical wire joints, form electrical circuits and test
basic electrical parameters as per the circuit drawings and
operating procedures.

9. Perform basic electrical Plan and organize the work for auto electrical component
testing in a vehicle. testing.
(NOS:AGR/N1129) Tracing the auto electrical components in a vehicle.
Test continuity and voltage drop in the electrical circuits.
Operate the electrical components in a vehicle and test lamps.

10. Perform battery testing and Ascertain and select tools and materials for the job.
charging operations. Comply with safety rules when performing the following
(NOS:AGR/N1129) operations.
Plan and select different methods for charging the battery.
Perform battery testing as per the operating procedure.

11. Construct basic electronic Plan and select different types of basic electronic components

12
Mechanic Tractor

circuits and testing. and measuring instruments.

(NOS:AGR/N9428) Construct and test the basic electronic gate circuits and its
components as per the standard procedure.

12. Manufacture components Plan and select appropriate method to produce components
with different types of with welding process.
welding processes in the given Comply with safety rules when performing the above
job. (NOS:AGR/N9429) operations.
Mark according to the drawing using marking tools on the job.
Select appropriate tools and equipment to perform the above
operations.
Set up and produce component as per standard operating
procedure.

13. Inspect the auto component Classify different vehicle components by its manufacturing
using Non-destructive testing processes
methods. (NOS:AGR/N1126) Ascertain and select tools and equipment to do NDT test the
given job.
Plan and organize the work for nondestructive testing.
Perform different types of nondestructive tests using
appropriate testing equipment.
Observe safety/precaution during testing the job.

14. Identify the hydraulic and Comply with safety rules when performing the following
pneumatic components in a operations.
vehicle. (NOS:AGR/N1129) Locate and identify the hydraulic components in a vehicle.
Locate and identify the pneumatic components in a vehicle.

15. Demonstrate Major Ascertain and select tools and materials for the job and make
Assemblies of Tractor. this available for use in a timely manner.
(NOS:AGR/N1130) Identify different gauges fitted on the dashboard and check
for proper functioning
Perform daily checks before starting the engine.
Start the engine and allow it to warm up.
Identify the problem in functionality of particular Gauge fitted
on dashboard and record the reading and compare it with
standard reading.

13
Mechanic Tractor

Repair / Replace the defective gauges as per standard

operating practice.
Check for proper functionality.

16. Overhaul Diesel Engine of Ascertain and select tools and materials for the job and make
Tractor. (NOS:AGR/N1128) this available for use in a timely manner.
Plan work in compliance with standard safety norms.
Demonstrate possible solutions and agree tasks within the
team.
Drain coolant and lubricants from the engine and Remove
Accessories of engine.
Service cylinder head assembly.
Service Oil Sump and Oil Pump.
Service Piston and connecting Rod Assembly.
Service Flywheel, Crank shaft, camshaft and its Bearings and
gear.
Service cylinder block.
Check and adjust valve clearances as per procedure and
recommended specification.
Refit all the accessories.
Refill all the required coolant and lubricants as per standard
specification.
Start the engine and observe reading of dashboard gauges and
record Engine Performance.

17. Perform servicing of Cooling Check Engine Coolant and Reverse flush the cooling system
and Lubrication system of using flushing solution.
Tractor in a workshop. Service Radiator and radiator cap
(NOS:AGR/N1128) Check Radiator hoses for crack and replace if necessary.
Test Thermostat valve for proper functioning as per
manufacturer specification and replace if necessary.
Check water pump for serviceability and replace if faulty.
Check Fan/Alternator Belt for proper tension.
Check & Replace Engine Oil
Replace Oil Filter & oil pump
Service Oil Cooler and pressure relief valve

14
Mechanic Tractor

18. Service Intake and Exhaust Service/Replace Air Cleaner

System of Tractor in a Overhaul Air Compressor
workshop. (NOS:AGR/N1128) Overhaul Exhauster Assembly
Service Turbocharger/Supercharger as per manufacturer
specification.
Service Intercooler.
Check Exhaust Leakages and Rubber Mounting of Exhaust
System.
Service Exhaust manifold.
Check and Replace Catalytic Converter.
Check and Replace Resonator/Muffler.

19. Service Fuel Feed System of Tune up Petrol Engine Tractor as per manufacturer
Tractor in a workshop. specification
(NOS:AGR/N1128) Check leakages in Diesel/Petrol fuel line.
Service Fuel Tank and fuel filter
Service Fuel Feed Pump/Petrol Fuel Pump
Set Diesel Fuel Injection Pump Timing as per manufacturer
specification
Bleed the Fuel System to vent out any air trapped.
Start the Engine and check for proper functioning as per
standard guidelines specified by manufacturer.

20. Overhaul Clutch and Ascertain and select tools and equipment for the job and
Gearbox of Tractor in a make this available for use in a timely manner.
workshop. (NOS:AGR/N1129) Plan work in compliance with standard safety norms.
Adjust clutch pedal free play and check its performance.
Monitor performance of Clutch and Gearbox by operating
vehicle.
Service Clutch, Gearbox and Driveline of tractor.
Refit Clutch, Gearbox and Auxiliary Gearbox to the Tractor and
check performance as per standard guidelines.

21. Overhaul Differential and PTO Ascertain and select tools and equipment for the job and
Unit of Tractor in the make this available for use in a timely manner.
workshop. (NOS:AGR/N1129) Plan work in compliance with standard safety norms.
Service Differential unit of the tractor

15
Mechanic Tractor

Service PTO unit of the tractor.

22. Overhauling Steering System Inspect steering linkages for excessive play.
of Tractor in the workshop. Service Steering Gear Box of the Tractor.
(NOS:AGR/N1129) Remove front Axle assembly from the Tractor.
Repair Front Axle Assembly as per guidelines laid down by
manufacturer
Refit Front Axle Assembly and check for proper functioning as
per manufacturer’s guidelines.
Check front and rear suspension for proper functioning and
abnormal noise.
Service front and rear suspension system.
Refit the front and rear suspension to the tractor and check
for proper functioning as per manufacturer's specification.

23. Carryout Repair of Wheels Check and service Rim, tires and tube and perform
and Tyres of Tractor in the repair/replace if necessary.
Workshop. (NOS:AGR/N1129) Inflate tires as per manufacturer recommended inflation
pressure.

24. Overhaul Brake system of Test the brake of tractor for effectiveness.
Tractor in the workshop. Service Brake.
(NOS:AGR/N1129) Remove Hydraulic Brake cylinder.
Service Hydraulic brake cylinder.
Bleed the brake system.

25. Overhaul Major Assemblies of Remove major assemblies of Power tiller.

Power Tiller and carryout Dismantle Transmission, clutch and brake
Field Operation. Clean and Replace/Repair components of Transmission, clutch
(NOS:AGR/N1108) and brake.
Assemble Transmission, clutch and brake components.
Refit the Transmission, clutch and brake to the Power Tiller.
Carryout field operation of Power tiller without implements.

26. Overhaul Implements of Check Plough, Harrows, cultivator, seed drill and tractor trailer
Tractor. (NOS:AGR/N1119) for proper functioning.
Carryout Service of Plough, Harrows, cultivator, seed drill and

16
Mechanic Tractor

tractor trailer.
Perform hitching practice (Single& Three Point).
Adjust agricultural implements for correct functioning during
field operations.

27. Overhaul Charging and Check Charging system for proper functioning as per
Starting System of Tractor. manufacturer guidelines.
(NOS:AGR/N1129) Service alternator.
Refit Alternator to the tractor and check for functioning.
Check starting system for proper functioning as per
manufacturer guidelines.
Service starter.
Refit starter to the tractor and check for functioning.

28. Demonstrate basic Solve different mathematical problems

mathematical concept and Explain concept of basic science related to the field of study
principles to perform practical
operations. Understand and
explain basic science in the field
of study. (NOS:AGR/N9451)

29. Read and apply engineering Read & interpret the information on drawings and apply in
drawing for different executing practical work.
application in the field of Read & analyze the specification to ascertain the material
work. (NOS:AGR/N9450) requirement, tools and assembly/maintenance parameters.
Encounter drawings with missing/unspecified key information
and make own calculations to fill in missing
dimension/parameters to carry out the work.

17
Mechanic Tractor

7. TRADE SYLLABUS

SYLLABUS FOR MECHANIC TRACTOR TRADE

DURATION: ONE YEAR

Professional Skills
Reference Learning Professional Knowledge
Duration (Trade Practical)
Outcome (Trade Theory)
With Indicative Hours
Professional Make choices tocarry 1. Familiarization with Admission & introduction
Skill 76 Hrs.; out marking of the institute, Job to the trade:
components for basic opportunities in the Introduction to the Course
Professional
fittingoperations in automobile sector, duration, course content,
Knowledge 12
theworkshop Machinery used in study of the syllabus.
Hrs.
followingsafety Trade. (07 hrs.) General rule pertaining to
precautions. 2. Types of work done by the Institute, facilities
(NOS:AGR/N9421) thestudents in the available-Hostel, Recreation,
shop floor. (08 hrs.) Medical and Library working
3. Practical related to hours and timetable.
Safety and Health, Occupational Safety &
Importance of HealthImportance of
Maintenance and Safetyand general
cleanliness of Precautions to be observed
Workshop. (03 hrs.) in the shop. Basic first aid,
4. Interaction with health safety signs - for Danger,
center and fire service Warning, caution &
station to provide personal safety message.
demo on First aid and Safehandling of Fuel
Fire safety, Use of fire Spillage, Fire extinguishers
extinguishers. (02 hrs.) used fordifferent types of
5. Demonstration on safe fire. Safe disposal of toxic
handling and Periodic dust, safe handling and
testing of lifting Periodic testing of lifting
equipment, and Safety equipment, Authorization of
disposal of used Moving & road-testing
engine oil. (02 hrs.) vehicles.
Safety disposal of Used
engine oil, Electrical safety

18
Mechanic Tractor

tips. (04 Hrs.)

6. Practice using all Hand & Power Tools: -
marking aids, like steel Marking scheme, Marking
rule with spring material-chalk, Prussian
blue. Cleaning tools-
calipers, dividers,
Scraper, wire brush, Emery
scriber, punches, paper, Description, care and
Chisel etc. (11 hrs.) use of Surface plates, steel
7. Layout a work piece- rule, measuring tape, try
for line, circle, arcs square. Calipers-inside and
and circles. (10 hrs.) outside. Dividers, surface
8. Practice to measure a gauges, scriber, punches-
prick punch, center punch,
wheelbase of a vehicle
pin punch, hollow punch,
with measuring tape. number and letter punch.
(10 hrs.) Chisel-flat, crosscut.
9. Practice to measure Hammer-ball peen, lump,
valve spring tension mallet. Screw drivers- blade
using spring tension screwdriver, Phillips screw
tester Practice to driver, Ratchet screwdriver.
Allen key, bench vice & C-
remove wheel lug nuts
clamps, Spanners- ring
with use of an air spanner, open end s panner
impact wrench & the combination spanner,
Practice on General universal adjustable open-
workshop tools & end spanner. Sockets &
power tools. (23 hrs.) accessories,
Pliers - Combination pliers,
multi grip, long nose, flat-
nose, Nippers or pincer
pliers, Side cutters, Tin
snips, Circlip pliers, external
circlips pliers. Air impact
wrench, air ratchet,
wrenches- Torque
wrenches, pipe wrenches,
car jetwashers Pipe flaring
& cutting tool, pullers-Gear
and bearing. (08 hrs.)
Professional Perform precision 10. Practice on measuring Systems of measurement,
Skill 56 Hrs.; measurements on the various Description, care & use of -
the components in components using Micrometers- Outside and
Professional
automotiveworkshop precision instruments depth micrometer,
Knowledge 15

19
Mechanic Tractor

Hrs. practices. Vernier Caliper, Micrometer adjustments,

(NOS:AGR/N9422) Micrometer, Dial Bore Vernier calipers, Telescope
Gauge, Telescopic gauges, Dial bore gauges,
Gauge, Feeler Gauge, Dial indicators, straightedge,
Pressure Gauge, Dial feeler gauge, thread pitch
Test Indicator by given gauge, vacuum gauge, tire
Job. (56 hrs) pressure gauge. (15 hrs.)
Professional Use different types of 11. Practice on Fasteners- Study of
Skill 14 Hrs.; fastening andlocking General cleaning, different types of screws,
devices in a vehicle. checking and use of nuts, studs & bolts, locking
Professional
(NOS:AGR/N9423) nut, bolts, & studs etc. devices, such as lock nuts,
Knowledge 05
(7 hrs.) cotter, split pins, keys,
Hrs.
12. Removal of stud/bolt circlips, lock rings, lock
from blind hole. (7 washers and locating where
hrs.) they are used. Washers &
chemical compounds can be
used to help secure these
fasteners. Function of
Gaskets, Selection of
materials for gaskets and
packing, oil seals. (05 Hrs.)
Professional Use cutting tools in 13. Practice on cutting Cutting tools :- Study of
Skill 14 Hrs.; the workshop, tools like Hacksaw, different type of cutting
following safety file, chisel, Sharpening tools like Hacksaw, File-
Professional
precautions while of Chisels, center Definition, parts of a file,
Knowledge05
grinding. punch, safety specification, Grade, shape,
Hrs.
(NOS:AGR/N9424) precautions while different type of cut and
grinding. (7 hrs.) uses., OFF-hand grinding
14. Practice on with sander, bench and
Hacksawing and filing pedestal grinders, safety
to given dimensions. precautions while grinding.
(7 hrs.) (05 Hrs.)
Professional Use different types 15. Practice on Marking Limits, Fits & Tolerances: -
Skill 14 Hrs.; of tools and and Drilling clear and Definition of limits, fits &
workshop Blind Holes, tolerances with examples
Professional
equipment in the Sharpening of Twist used in auto components.
Knowledge 05
workshop. Drills Safety Drilling machine -
Hrs.
(NOS:AGR/N1126) precautions to be Descriptionand study of

20
Mechanic Tractor

observed while using a Bench type Drilling machine,

drilling machine. (14 Portable electrical Drilling
hrs.) machine,drill holding
devices, WorkHolding
devices, Drill bits. (05 Hrs.)
Professional Perform basic fitting 16. Practice on Tapping a Taps and Dies: Hand Taps
Skill 14 Hrs.; operations used in Clear and Blind Hole, andwrenches, Calculation of
the workshop Selection of tape drill Tap drill sizes for metric and
Professional
practices and Size, use of inch taps. Different type of
Knowledge 05
inspection of Lubrication, Use of Die andDie stock. Screw
Hrs.
dimensions. stud extractor. (6 hrs.) extractors. Hand Reamers -
(NOS:AGR/N9425) 17. Cutting Threads on a Different Type of hand
Bolt/ Stud. (2 hrs.) reamers, Drill size for
18. Adjustment of two - reaming, Lapping, Lapping
piece Die, reaming a abrasives, type of Laps. (05
hole/ Bush to suit the Hrs.)
given pin/ shaft,
scraping a given
machined surface. (6
hrs.)
Professional Produce sheet metal 19. Brazing of Pipes. (7 Brazing fluxes used on
Skill 7 Hrs.; components using hrs.) common joints. (1 hrs.)
various sheet metal
Professional
operations.
Knowledge 01
(NOS:AGR/N9426)
Hrs.
Professional Construct electrical 20. Practice in joining Basic electricity, Ground
Skill 14 Hrs.; circuits and test its wires using soldering connections, Mulitmeter,
parameters by using Iron, Construction of Conductors & insulators,
Professional
electrical measuring simple electrical Wires, Shielding,Length vs.
Knowledge 03
instruments. circuits, measuring of resistance, Resistor ratings.
Hrs.
(NOS:AGR/N9427) current, voltage and (03 Hrs.)
resistance using digital
multimeter, practice
continuity test for
fuses, jumper wires,
fusible links, circuit
breakers. (14 hrs.)

21
Mechanic Tractor

Professional Perform basic 21. Diagnose series, Fuses & circuit breakers,
Skill 14 Hrs.; electrical testing in a parallel, series-parallel Ballast resistor, Stripping
vehicle. circuits using Ohm's wireinsulation, cable colour
Professional
(NOS:AGR/N1129) law, check electrical codes and sizes, Resistors in
Knowledge 03
circuit with a test Series circuits, Parallel
Hrs.
lamp, perform voltage circuits and Series-parallel
drop test in circuits circuits, Capacitors and its
using multimeter, applications, Capacitors in
measure current flow series and parallel. (03 Hrs.)
using
multimeter/ammeter,
use of service manual
wiring diagram for
Troubles hooting. (14
hrs.)
Professional Perform battery 22. Cleaning and topping Description of Batteries &
Skill 28 Hrs.; Testing and charging up of a lead acid cells, Lead acid batteries &
operations. battery, Testing Stay Maintenance Free
Professional
(NOS:AGR/N1129) battery with (SMF) batteries,
Knowledge 03
hydrometer, Thermisters, Thermo
Hrs.
connecting battery to couples, Relays, Solenoids,
a charger for battery Charging system circuit (03
charging, Inspecting & Hrs.)
testing a battery after
charging, Measure
and Diagnose the
cause(s) of excessive
Key-off battery drain
(parasitic draw) and
do corrective action.
(16 hrs.)
23. Testing of relay and
solenoids and its
circuit. (12 hrs.)
Professional Construct basic 24. Identify and test Basic electronics:
Skill 14 Hrs.; electronic circuitsand power and signal Description of
testing. connectors for Semiconductors, Solid state
Professional
(NOS:AGR/N9428) continuity, Identify devices- Diodes, Transistors,
Knowledge 05

22
Mechanic Tractor

Hrs. and test different type Thyristors, Uni Junction

of Diodes, NPN & PNP Transistors (UJT), Metal
Transistors for its Oxide Field Effect
functionality, Transistors (MOSFETs), Logic
Construct and test gates-OR, AND & NOT and
simple logic circuits Logic gates using switches.
OR, AND & NOT and (05 Hrs.)
Logic gates using
switches. (14 hrs.)
Professional Manufacture 25. Setting of Gas welding Introduction to welding and
Skill 14 Hrs.; components with flames, practice to Heat Treatment Welding
different types of make a straight beads processes - Oxy – Acetylene
Professional
welding processes in and joints Oxy- welding principles,
Knowledge 3
the given job. Acetylene welding (14 equipment,welding
Hrs.
(NOS:AGR/N9429) hrs.) parameters, edge
preparation & fit up and
welding techniques. (3 Hrs.)
Professional Identify the Hydraulic 26. Identification of Introduction to Hydraulics
Skill 56 Hrs.; and pneumatic Hydraulic components & Pneumatics: -
components in a used in vehicle. (13 Definition of Pascal law,
Professional
vehicle. hrs.) pressure, Force, viscosity.
Knowledge 6
(NOS:AGR/N1129) 27. Tracing of hydraulic Description, symbols and
Hrs.
circuit on hydraulic application in automobile of
jack, hydraulic power Gear Pump-Internal &
steering, and Brake External, single acting,
circuit. (15 hrs.). doubleacting & Double
28. Identification of ended cylinder; Directional
different type of controlvalves-2/2, 3/2, 4/2,
Vehicle. (6 hrs.) 4/3 way valve, Pressure
29. Demonstration of relief valve, Non return
vehicle specification valve, Flow control valve
data; Identification of used in automobile. (03
vehicle information Hrs.)
Number (VIN). (11 Auto Industry - History,
hrs.) leading manufacturers,
30. Demonstration of development in automobile
Garage, Service station industry, trends, new
equipments. Vehicle product. Brief about

23
Mechanic Tractor

hoists - Two post and Ministry of Road transport

four post hoist, Engine &Highways,
hoists, Jacks, Stands. Definition: - Classification of
(11 hrs.) vehicles on the basis of load
as per central motor vehicle
rule, wheels, final drive, and
fuel used, axles, position of
engine and steering
transmission, body and
load. Brief description and
uses of Vehicle hoists - Two
post and four post hoist,
Engine hoists, Jacks, Stands.
(03 Hrs.)
Professional Demonstrate 31. Demonstration of Tractor Industry in India –
Skill 56 Hrs.; Major Assembliesof tractor specification leading manufacturers,
different typesof data. (5 hrs.) development in Tractor
Professional
Tractor. 32. Identification of industry, trends, new
Knowledge 6
(NOS:AGR/N1130) different major product. Study of tractors,
Hrs.
assemblies of tractor Different type of Tractor
and cleaning of starting method and
tractors, oil greasing stopping. (01 Hrs.)
and lubricating all
moving parts of
tractor. (12 hrs.)
33. Practice on starting
and stopping of
tractor engine. (12
hrs.)
34. Dismantling of tractor Engine Basics:
engine as per Classification of engines,
procedure & Principle & working of 2 &
4- Stroke diesel engine
Inspection of
(Compression ignition
components for Engine (C.I), Principle of
dimension and wear. Spark Ignition Engine(SI),
(27 hrs.) differentiate between 2-
stroke and 4-stroke, C.I
engine and S.I Engine,
Direct injection and Indirect

24
Mechanic Tractor

injection. Brief on common

rail diesel injection engine.
Engine output,
compression pressure,
Compression ratio. (05
Hrs.)
Professional Overhaul Diesel 35. Remove cylinder head Engine Components –
Skill 77 Hrs.; Engine of Tractor. from engine. (5 hrs.) working principle &
(NOS:AGR/N1128) 36. Overhauling of construction of cylinder
Professional heads, types of combustion
cylinder head
Knowledge 16 chambers. Function of
assembly with use of Engine Valves, different
Hrs.
service manual for types, materials, Type of
clearance and other valve operating mechanism.
parameters. (11 hrs.) Importance of Valve seats &
37. Practice on removing inserts, importance of Valve
movement, Valve stem, oil
rocker arm assembly
seals, Valve-timing diagram
manifolds, fitting of and concept of Variable
valve guide. (11 hrs.) valve timing. (04 Hrs.)
38. Cylinder block Description of Cylinder
overhaul. (5 hrs.) block,Cylinder block
39. Measurement of construction, types of
cylinder liner & cylinder blocks &cylinder
crankshaft for ovality liners. Description &
and taperness. (5 hrs.) functions of different types
40. Overhauling piston of pistons, piston rings and
and connecting rod piston pins and
assembly with use of materials.
service manual for Used recommended
clearance and other clearances for the rings and
parameters. (10 hrs.) its necessity precautions
41. Practice on removing while fitting rings, common
oil sump and oil pump troubles and remedy. (06
- clean the sump. (5 Hrs.)
hrs.)
42. Practice on removing Description & function of
the big end bearing, connecting rod, importance
connecting rod with of big end split obliquely,
the piston. (2 hrs.) Materials used for
43. Practice on removing connectingrods big end &

25
Mechanic Tractor

the piston rings, main bearings.Shells piston

Dismantle the piston pins and locking methods of
and connecting rod. (5 piston pins.Recommended
hrs.) clearances for the cylinder
44. Check the side liners & rings. Bearing
clearance of piston failure & its causes-care &
rings in the piston maintenance.
groove & lands for Description of crankshaft &
wear. (3 hrs.) Camshafts. Types of their
45. Check piston skirt and drives. Description of
crown for damage and Overhead camshaft,
scuffing, clean oil importance of Cam lobes.
holes. Measure -the Crankcase ventilation (PCV).
piston ring close gap in Camshaft, Crank-shaft
the cylinder, clearance balancing, Firing order of
between the piston the engine.
and the liner, Description and function of
clearance between the fly wheel and vibration
crank pin and the damper. Timing mark. (06
connecting rod big end Hrs.)
bearing. (2 hrs.)
46. Check connecting rod
for bend and twist. (3
hrs.)
47. Setting of Connecting
rod big end & main
bearing. (2 hrs.)
48. Assembling crank
shaft, main bearings,
connecting rods and
piston assembly in the
engine, fitting
cylinder head. (5 hrs.)
49. Setting valve timing. (3
hrs.)
Professional Perform servicing of 50. Checking cooling Cooling systems: - Coolant
Skill 56 Hrs.; Cooling and system for properties,preparation and
Lubrication systemof overheating under- recommended change of

26
Mechanic Tractor

Tractor in a cooling. (6 hrs.) interval, use of anti-freezer.

Professional
workshop. 51. Dismantling, cleaning, Cooling system
Knowledge 6
(NOS:AGR/N1128) assembling & testing components, water pump,
Hrs.
of water pumps, function of thermostat,
reverse flushing the pressure cap,Recovery
system. (11 hrs.) system & Thermo-switch.
52. Checking of Function & types of
thermostat valve, Radiator. (03 Hrs.)
pressure cap. (6 hrs.)
53. Adjusting the fan belt
tension. (5 hrs.)
54. Identification of Lubrication system: -
lubrication oil flow purposes & characteristics
circuit in an engine. (6 of oil, type of lubricants,
hrs.) gradeas per SAE, & their
55. Overhauling oil pump, application, oil additives,
servicing of oil cooler typeof lubrication system.
& centrifugal oil filter. Lubrication system
(11 hrs.) components- different type
56. Testing oil pressure. ofOil pump, Oil filters & oil
(11 hrs.) cooler. Probable reasons for
low / high oil pressure,
highoil consumption and
their remedies. (03 Hrs.)
Professional Service Intake and 57. Servicing of air cleaner Intake & exhaust systems -
Skill 28 Hrs.; Exhaust System of (Oil bath) Checking & Description of Diesel
Tractor in a changing an air filter. induction & Exhaust
Professional
workshop. (5 hrs.) systems. Description &
Knowledge 04
(NOS:AGR/N1128) 58. Dismantling & function of air compressor,
Hrs.
assembling of turbo Supercharger, Intercoolers,
charger, check for turbocharger, variable
axial clearance as per turbo charger mechanism.
service manual. (6 Intake system components-
hrs.) Description and function of
59. Checking of Exhaust Air cleaners, Different type
Gas Recirculation. (5 aircleaner, Description of
hrs.) Intake manifolds and
60. Check Exhaust system material. Exhaust system

27
Mechanic Tractor

for rubber mounting components-Description

for damage, and function of Exhaust
deterioration and out manifold, Exhaust pipe,
of position; for Mufflers- Reactive,
leakage, loose absorptive, Combination,
connection, dent and Electronic mufflers, Catalytic
damage; Practice on converters, Backpressure,
Exhaust manifold Diesel particulate filter,
removal and Exhaust Gas Recirculation
installation. (6 hrs.) (EGR). (04 Hrs.)
61. Practice on Catalytic
converter removal and
installation. (6 hrs.)
Professional Service Fuel Feed 62. Practice in engine tune Diesel fuel characteristics,
Skill 56 Hrs.; System of Tractorin a up in a vehicle -testing concept of Quiet diesel
workshop. vacuum and technology & Clean diesel
Professional
(NOS:AGR/N1128) compression of technology, Fuel feed
Knowledge 7
engine, (6 hrs.) system used in Tractor's
Hrs.
63. Tracing of different descriptionand layout.
parts of fuel system. (5 Diesel fuel system
hrs.) components, Description
64. Repairing fuel leaks in and function of Diesel fuel
pipe line and unions, injection system, types of
Servicing and testing fuelinjection pumps, type
of fuel feed pump. of drive, injectors-types and
Servicing of fuel filters. function. Governor and their
Servicing of fuel types.
Injection Pump. (8 Distributor-type injection
hrs.) pump, Glow plugs,
65. Servicing of pressure Cummins & Detroit
pump of (C.R.D.I.). (7 Diesel injection. Diesel
hrs.) electronic control- Diesel
66. Regulator's and electronic control systems
Elect/Electronic (DEC),Common rail diesel
injectors, checking injectionSystem.
operation of C.R.D.I. Method of bleeding fuel
system. Overhauling & supply system. (7 hrs.)
testing of injectors. (8

28
Mechanic Tractor

hrs.)
67. Setting injection
timing. Bleeding fuel
lines for Air locks. (8
hrs.)
68. Testing cylinder
compression, checking
idle speed, Obtaining
& interpreting scan
tool data. (7 hrs.)
69. Fault finding &
remedy, care &
maintenance. (7 hrs.)
Professional Overhaul Clutch and 70. Dismantle clutch
Clutch: -types, construction
Skill 28 Hrs.; Gearbox of Tractor in assembly. (4 hrs.) and function. Components
a workshop. 71. Inspect the parts of of clutch -driver & driven
Professional
(NOS:AGR/N1129) clutch. (2 hrs.) plates, torsion spring,
Knowledge 05
72. Relining of clutch plate cushion springs, operating
Hrs.
& assemble. (3 hrs.) fingers, clutch shaft, Slave
73. Coupling the clutch cylinder & oil seal. Clutch
with flywheel & join release bearing & linkages.
the engine with gear Manual transmissions-
box. (5 hrs.) Function, description, types
74. Adjust clutch pedal and their application.
free play. Dismantle Gearbox layout.
gear box of a tractor & Components of tractor gear
inspect the parts. (5 box. Principle of epicyclical
hrs.) gear box. Necessity of
75. Assemble the gear torque convertor, need of
box. (5 hrs.) 4 x 4-wheel d r i v e /
76. Overhauling Transfer Front wheel drive, Low &
case and auxiliary gear high gear ratio, universal
box. (4 hrs.) joint and propellershaft. (05
Hrs.)
Professional Overhaul Differential 77. Overhauling of Final Drive & Drive Shafts
Skill 28 Hrs.; and PTO Unit of differential. (6 hrs.) Differential carriers double
Tractorin the 78. Servicing of reduction reduction gearing,
Professional
workshop. gear, rear axle wheel differentiallock, crown
Knowledge 07

29
Mechanic Tractor

Hrs. (NOS:AGR/N1129) hub. (11 hrs.) wheel andpinion

79. Servicing of PTO adjustments, functionand
(Power Take Off). types of power take off
Measure rpm of PTO (PTO) mechanism. Types of
shaft & speed of belt front & rear axles. Common
pulley. (11 hrs.) trouble and their remedies,
care and maintenance. (07
Hrs.)
Professional Overhaul Steering 80. Checking, Layout of Steering Systems-
Skill 56 Hrs.; System of Tractor in Mechanical steering Function and types of
the workshop. system. Checking/ steeringsystem. Description,
Professional
(NOS:AGR/N1129) Inspection of Steering construction and function of
Knowledge 09
linkage and necessary mechanical steering system
Hrs.
repair. (6 hrs.) steering wheel, steering
81. Remove steering gear box, tie-rod, arms link,
wheel. Overhauling of ball and socket joints etc.
steering gear box of their movement and
tractor. (5 hrs.) adjustment.Description and
82. Remove front axle and mechanismof foot steerage
spindle hub and pedal as incorporated in
steering linkage. (6 tractors.Description,
hrs.) working and principle of
83. Reassembling steering hydraulic steering system.
assembly and Test for Different parts such as
correct function. (6 pump, distributor valves,
hrs.) pipe line and hoses etc.
84. Checking, inspect Development of mechanical
layout of different framing. Use of Power tiller,
parts of Hydraulic Tractor & Bulldozer, Chassis
steering system. (11 frame of tractor. (9 hrs.)
hrs.)
85. Practice on visual
Inspection of chassis
frame for crack, bent
and twists. (6 hrs.)
86. Overhauling and
Inspection of shackle,
front & rear

30
Mechanic Tractor

suspension. (10 hrs.)

87. Lubricating a
suspension system. (6
hrs.)
Professional Carryout Repair of 88. Remove wheels from Wheels & Tyres-
Skill 28 Hrs.; Wheels and Tyres of tractor. (4 hrs.) Description, construction
Tractor in the 89. Dismantle wheel for and function ofWheel. Rim
Professional
Workshop. checking rims, tyres sizes. Types & sizes of tyres.
Knowledge 05
(NOS:AGR/N1129) for wear and tubes for Solid, pneumatic & Radial.
Hrs.
leaks. (5 hrs.) Ply rating. Tyre materials,
90. Repairing, de-rusting, Tyre information, Tyre tread
painting. (5 hrs.) designs, Tyre ratings for
91. Fitting of tyres and temperature & traction.
tubes on rim & inflate Importance of in-Flatting
to correct pressure. (5 tyres to correct pressure.
hrs.) Repair and maintenance of
92. Balancing of Tractor tyres and tubes. Storage of
wheels. Practice of tyres. Descriptions Tire wear
tyre rotation. Fitting Patterns and causes
wheels on tractors. Nitrogen vs atmospheric air
Tightening of wheel in in tyres. (05 Hrs.)
correct sequence. (5
hrs.)
93. Checking & adjusting
tire pressure by use of
air or by Nitrogen. (4
hrs.)
Professional Overhaul Brake 94. Overhauling brakes Braking Systems - Braking
Skill 28 Hrs.; system of Tractorin including cleaning and fundamentals Principles of
the workshop. inspection of all braking, Drum & disc
Professional components, relining
(NOS:AGR/N1129) brakes, Lever/mechanical
Knowledge 09 shoes, setting and
advantage,Hydraulic
Hrs. actuating shoe
clearance. (6 hrs.) pressure & force, Brake
95. Inspection spring of fade.
both shoe and lever. Braking systems - Brake
(5 hrs.) type used on tractor.
96. Inspecting and Braking system
setting parking brakes. components-
(5 hrs.)
Park brake system, Brake
97. Inspecting and setting

31
Mechanic Tractor

hydraulic main brake pedal, Brake lines, Brake

including replacement fluid,Bleeding, Master
of washer and oil cylinder, Divided systems,
seals. (4 hrs.) Tandemmaster cylinder,
98. Overhauling serve Powerbooster or brake unit,
mechanism (as Hydraulic brake booster,
applicable) inspecting Applying brakes, Brake
piston and valves. (2 force, Brake light switch
hrs.) Drum brakes & components
99. Bleeding and -Drum brake system, Drum
adjustment of brakes. brake operation, Brake
(2 hrs.) linings& shoes, Backing
100. Fault tracing and plate, Wheelcylinders Disc
remedy. (2 hrs.) brakes & components-Disc
101. Skimming of brake brakesystem, Disc brake
drum and disc plate. (2 operation, Disc brake rotors,
hrs.) Disc brake pads, Disc brake
calipers,Proportioning
valves, Proportioning valve
operation, Brake friction
materials. (9 hrs.)
Professional Overhaul Major 102. Overhauling power Description, working
Skill 21 Hrs.; Assemblies of tiller transmission principle& use of power
Power Tiller and system includes main tiller (two-wheel tractor)
Professional
carryout Field clutches, steering power unit. Method of
Knowledge 04
Operation. clutch/brakes powertransmission to wheel
Hrs.
(NOS:AGR/N1108) mechanism-gear box from engine. Main clutch
and wheel hub testing assembling working
for field operation procedure steering
without implements Clutch/brakes mechanism
and with implements. method of power
(13 hrs.) transmission to implement
103. Driving practice with (Rotation). Hitching of M.B.
trolley/trailer. (8 hrs.) Plough, trailer disc harrow.
(04 Hrs.)
Professional Overhaul Implements 104. Checking implements Tractor equipment: -
Skill 15 Hrs.; of Tractor. such as ploughs, Description, function of
Professional (NOS:AGR/N1119) harrows, cultivators, harrows, cultivators, seed
drills & tractor trailer.

32
Mechanic Tractor

Knowledge 06 seed drills, tractor Hitching of equipment.

Hrs. trailer, & P.T.O. units Danger in overloading &
etc. for serviceability incorrect field operation.
Average life of Agriculture
before use. (5 hrs.)
implements. Description
105. Lubricate them as andfunction of tractor
required. Hitching accessoriessuch as Draw
practice (single & bar, top link & Belly Pulley.
three points). (5 hrs.) Setting of drawbar to
106. Exercise in driving a correct height. Use of
Hydraulic lift. Maintenance
tractor with different
of tractor accessories. (06
implements. (5 hrs.) Hrs.)
Professional Overhaul Charging 107. Practice on removing Tractor Electrical
Skill 28 Hrs.; and Starting System alternator from Maintenance:
of Tractor. vehicle dismantling, Lighting arrangement in
Professional
(NOS:AGR/N1129) cleaning checking for tractors (As applicable).
Knowledge 05
defects, assembling Description of charging
Hrs.
and testing for circuit. Operation of
motoring action of alternator, regulator unit
alternator & fitting to ignition warning lamp
vehicles. (11 hrs.) troubles and remedy in
108. Practice on removing charging system. Fault
starter motor vehicle findingin electrical system.
and overhauling the Description of starter motor
starter motor, testing circuit, common troubles
of starter motor. (11 and remedy in starter
hrs.) circuit. Description of
109. Servicing storage lighting circuit. Charging &
batteries, tracing discharging of lead acid
lighting circuit fault battery. (05 Hrs.)
rectification. (6 hrs.)
ENGINEERING DRAWING: (40 Hrs.)
Professional Read and apply Introduction to Engineering Drawing and Drawing
Knowledge engineering drawing Instruments –
ED- 40 Hrs. for different Conventions
application in the Sizes and layout of drawing sheets
field of work. Title Block, its position and content
(NOS:AGR/N9450) Drawing Instrument
Lines- Types and applications in drawing

33
Mechanic Tractor

Free hand drawing of –

Geometrical figures and blocks with dimension
Transferring measurement from the given object to the
free hand sketches.
Free hand drawing of hand tools and measuring tools.
Drawing of Geometrical figures:
Angle, Triangle, Circle, Rectangle, Square, Parallelogram.
Lettering & Numbering – Single Stroke.
Dimensioning
Types of arrowhead
Leader line with text
Position of dimensioning (Unidirectional, Aligned)
Symbolic representation –
Different symbols used in the related trades of Mechanic
Auto Body Repair / Electrical and Electronics / Diesel /
Tractor / Two and Three-wheeler.
Concept and reading of Drawing in
Concept of axes plane and quadrant
Concept of Orthographic and Isometric projections
Method of first angle and third angle projections
(definition and difference)
Reading of Job drawing related to Mechanic Auto Body
Repair / Electrical and Electronics / Diesel / Tractor / Two
and Three-wheeler trades.
WORKSHOP CALCULATION & SCIENCE: (40 Hrs)
Professional Demonstrate basic Unit, Fractions
Knowledge mathematical Classification of unit system
concept and Fundamental and Derived units F.P.S, C.G.S, M.K.S and SI
units
WCS- 40 Hrs. principles to perform
Measurement units and conversion
practical operations. Factors, HCF, LCM and problems
Understand and Fractions - Addition, substraction, multiplication &
explain basic science division
in the field of study. Decimal fractions - Addition, subtraction, multilipication &
(NOS:AGR/N9451) division
Solving problems by using calculator
Square root, Ratio and Proportions, Percentage
Square and suare root
Simple problems using calculator
Applications of pythagoras theorem and related problems
Ratio and proportion

34
Mechanic Tractor

Ratio and proportion - Direct and indirect proportions

Percentage
Precentage - Changing percentage to decimal and fraction
Material Science
Types metals, types of ferrous and nonferrous metals
Physical and mechanical properties of metals
Introduction of iron and cast iron
Difference between iron & steel, alloy steel and carbon
steel
Properties and uses of rubber, timber and insulating
materials
Mass, Weight, Volume and Density
Mass, volume, density, weight and specific gravity,
numerical related to L, C, O section only
Related problems for mass, volume, density, weight and
specific gravity
Speed and Velocity, Work, Power and Energy
Speed and velocity - Rest, motion, speed, velocity,
difference between speed and velocity, acceleration and
retardation
Speed and velocity - Related problems on speed &
velocity
Work, power, energy, HP, IHP, BHP and efficiency
Heat & Temperature and Pressure
Concept of heat and temperature, effects of heat,
difference between heat and temperature, boiling point &
melting point of different metals and non-metals
Concept of pressure - Units of pressure, atmospheric
pressure, absolute pressure, gauge pressure and gauges
used for measuring pressure
Basic Electricity
Introduction and uses of electricity, electric current AC,
DC their comparison, voltage, resistance and their units
Conductor, insulator, types of connections - series and
parallel
Ohm's law, relation between V.I.R & related problems
Mensuration
Area and perimeter of square, rectangle and
parallelogram
Surface area and volume of solids - cube, cuboid, cylinder,
sphere and hollow cylinder
Finding the lateral surface area, total surface area and
capacity in litres of hexagonal, conical and cylindrical
shaped vessels

35
Mechanic Tractor

Levers and Simple machines

Simple machines - Effort and load, mechanical advantage,
velocity ratio, efficiency of machine, relationship between
efficiency, velocity ratio and mechanical advantage
Lever & Simple machines - Lever and its types
Trigonometry
Measurement of angles
Trigonometrical ratios
Trigonometrical tables
In plant Training/Project Work

36
Mechanic Tractor

SYLLABUS FOR CORE SKILLS

1. Employability Skills (Common for all CTS trades) (120 Hrs.)

Learning outcomes, assessment criteria, syllabus and Tool List of Core Skills subjects which is
common for a group of trades, provided separately in www.bharatskills.gov.in

37
Mechanic Tractor

ANNEXURE-I

LIST OF TOOLS AND EQUIPMENT

Mechanic Tractor (For batch of 20 candidates)

S. No. Name of the Tools& Equipment Specification Quantity

A. TRAINEES TOOL KIT

1. Allen Key set of 12 pieces 2mm to 14mm 5+1 nos.
2. Caliper inside 15 cm Spring 5+1 nos.
3. Calipers outside 15 cm spring 5+1 nos.
4. Center Punch 10 mm. Dia. x 100 mm. 5+1 nos.
5. Dividers 15 cm Spring 5+1 nos.
6. Electrician Screwdriver 250mm 5+1 nos.
7. Hammer ball peen 0.5 kg with handle 5+1 nos.
8. Hands file 20 cm. Second cut flat 5+1 nos.
9. Philips Screwdriver set of 5 pieces 100 mm to 300 mm 5+1 nos.
10. Pliers combination 20 cm. 5+1 nos.
11. Screwdriver 20cm.X 9mm. Blade 5+1 nos.
12. Screwdriver 30 cm. X 9 mm. Blade 5+1 nos.
13. Scriber 15 cm 5+1 nos.
14. Spanner D.E. set of 12 pieces 6mm to 32mm 5+1 nos.
15. Spanner, ring set of 12 metric sizes 6 to 32 mm. 5+1 nos.
16. Spanners socket with speed 5+1 nos.
handle, T-bar, ratchet and
universal upto 32 mm set of 28
pieces with box
17. Steel rule 30 cm inch and metric 5+1 nos.
18. Steel tool box with lock and key 400x200x150 mm 5+1 nos.
(folding type)
19. Wire cutter and stripper 5+1 nos.
B. TOOLS, INSTRUMENTS AND GENERAL SHOP OUTFIT
25. Adjustable spanner pipe wrench 350 mm 2 nos.
26. Air blow gun with standard 1 no.
accessories
27. Air impact wrench with standard 4 nos.
accessories

38
Mechanic Tractor

28. Air ratchet with standard 4 nos.

accessories
29. Allen Key set of 12 pieces 2mm to 14mm 2 nos.
30. Alternator for tractor - different 2 nos.
type
31. Ammeter 300A/ 60A DC with external 4 nos.
shunt
32. Angle plate adjustable 250x150x175 1 no.
33. Angle plate size 200x100x200mm 2 nos.
34. Anvil 50 Kgs with Stand 1 no.
35. Arbor press hand operated 2 ton capacity 1 no.
36. Auto Electrical test bench 1 no.
37. Battery -charger 2 nos.
38. Belt Tensioner gauge 1 no.
39. Blow Lamp 1 litre 2 nos.
40. Caliper inside 15 cm Spring 4 nos.
41. Calipers outside 15 cm spring 4 nos.
42. Car Jet washer with standard 1 no.
accessories
43. Chain Pulley Block-3-ton capacity 1 no.
with tripod stand
44. Chaser hard W/V 9 to 40 T.P.I. set 1 set
of 11 external.
45. Chaser, hand W/W 9 to 40 T.P.I. 1 set
set of 11 internal
46. Chisel 10 cm flat 4 nos.
47. Chisels cross cut 200 mm X 6mm 4 4 nos.
48. Circlip pliers Expanding and 15cm and 20cm each 4 nos.
contracting type
49. Clamps C 100mm 2 nos.
50. Clamps C 150mm 2 nos.
51. Clamps C 200mm 2 nos.
52. Cleaning tray 45x30 cm. 4 4 nos.
53. Clutches, different types such as 1 each
cone type, disc type
54. Compression testing gauge 2 nos.
suitable for diesel Engine
55. Connecting rod alignment fixture 1 1 no.
56. Copper bit soldering iron 0.25 Kg 4 nos.
57. Cut section model of fuel filter 1 no.

39
Mechanic Tractor

58. Cylinder bore gauge capacity 20 to 160 mm 4 nos.

59. Cylinder liner- Dry & wet liner, 1 each
press fit & slidefit liner
60. Depth micrometer 0-25mm 4 nos.
61. Dial gauge type 1 Gr. A (complete 4 nos.
with clamping devices and stand)
62. Different type of Engine Bearing 1 set
model
63. Different type of piston model 1 each
64. Dividers 15 cm Spring 4 nos.
65. Drift Punch Copper 15 Cm 4 nos.
66. Drift, copper 10 x 15 1/2 mm 2 nos.
67. Drill point angle gauge 1 no.
68. Drill twist 1.5 mm to 15 mm (various sizes) 4 nos.
by 0.5 mm 4
69. Electric Soldering Iron 230 V 60 watts 230 V 25 2 each
watts
70. Electric testing screw driver 4 nos.
71. Engineer's square 15 cm. Blade 4 nos.
72. Engineers stethoscope 1 no.
73. Equipment puncture, in box, 1 no.
74. Feeler gauge 20 blades (metric) 2 nos.
75. File flat 20 cm bastard 4 nos.
76. File, half round 20 cm second cut 4 nos.
77. File, Square 20 cm second cut 4 nos.
78. File, Square 30 cm round 4 nos.
79. File, triangular 15 cm second cut 4 nos.
80. Files assorted sizes and types 2 set
including safe edge file (20 Nos)
81. Flat File 25 cm second cut 4 nos.
82. Flat File 35 cm bastard 4 nos.
83. Fuel feed pump for Diesel 1 no.
84. Fuel injection pump (Diesel) inline 1 no.
85. Glow plug tester 2 nos.
86. Granite surface plate 1600 x 1000 with stand and cover 1 no.
87. Grease Gun 2 nos.
88. Grover - 3, 4, 6mm. 1 Each
89. Growler 2 nos.
90. Hacksaw frame adjustable 20-30 cm 10
91. Hammer Ball Peen 0.75 Kg 4 nos.
92. Hammer Chipping 0.25 Kg 4 nos.
93. Hammer copper 1 Kg with handle 4 nos.

40
Mechanic Tractor

94. Hammer Mallet 4 nos.

95. Hammer Plastic 2 nos.
96. Hand operated crimping tool (i) for 2 nos.
crimping up to 4mm and (ii) for
crimping up to 10mm
97. Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75 2sets
mm, 12.75 to 14.25 mm and 14.25 to
15.75 mm
98. Hand Shear Universal 250mm 2 nos.
99. Hand vice 37 mm 2 nos.
100. Hollow Punch set of seven pieces 6mm to 15mm 2 sets each
101. Hydraulic jack HI-LIFT type - 3 ton capacity 1 no.
102. Injector - Multi hole type, Pintle 4 each
type
103. Injector cleaning unit 1 no.
104. Injector testing set (Hand tester) 1 no.
105. Insulated Screwdriver 20 cm x 9mm blade 10 nos.
106. Insulated Screwdriver 30 cm x 9mm blade 10 nos.
107. Lifting jack screw type 3 ton capacity 4 nos.
108. Magneto spanner set with 8 spanners 1 set
109. Magnifying glass 75mm 2 nos.
110. Marking out table 90X60X90 cm. 1 no.
111. Multi Scan Tool 1 no.
112. Multimeter digital 5 nos.
113. Oil can 0.5/0.25 liter capacity 2 nos.
114. Oil pump for dismantling and 2 nos.
assembling.
115. Oil Stone 15 cm x 5 cm x 2.5 cm 1 no.
116. Oscilloscope 20MHz 1 no.
117. Outside micrometer 0 to 25 mm 4 nos.
118. Outside micrometer 25 to 50 mm 4 nos.
119. Outside micrometer 50 to 75 mm 1 no.
120. Outside micrometer 75 to 100 mm 1 no.
121. Philips Screwdriver set of 5 pieces 100 mm to 300 mm 2 sets
122. Pipe cutting tool 2 nos.
123. Pipe flaring tool 2 nos.
124. Piston ring compressor 2 nos.
125. Piston Ring expander and 2 nos.
remover.
126. Piston Ring groove cleaner. 1 no.
127. Pliers combination 20 cm. 2 nos.
128. Pliers flat nose 15 cm 2 nos.

41
Mechanic Tractor

129. Pliers round nose 15 cm 2 nos.

130. Pliers side cutting 15 cm 2 nos.
131. Portable electric drill Machine 1 no.
132. Portable oil monitoring Indicator 1 no.
133. Power Supply 0-12 v, lamp 1 no.
134. Prick Punch 15 cm 4 nos.
135. Punch Letter 4mm 2 set
136. Radiator cut section-cross flow 1 no.
137. Radiator cut section-down flow 1 no.
138. Radiator pressure cap 2 nos.
139. Rake 1 no.
140. Rear axle assembly-gear box 2 set
steering box assembly of the
diesel engine
141. Ridger. 2 nos.
142. Rivet sets snap and Dolly 3mm, 4mm, 6mm 4 nos.
combined
143. Scraper flat 25 cm 2 nos.
144. Scraper half round 25 cm 2 nos.
145. Scraper Triangular 25 cm 2 nos.
146. Scriber 15 cm 2 nos.
147. Scriber with scribing black 2 nos.
universal
148. Set of stock and dies - UNC, UNF 2 sets
and metric
149. Soldering Copper Hatchet type 500gms 4 nos.
150. Spanner Clyburn 15 cm 1 no.
151. Spanner D.E. set of 12 pieces 6mm to 32mm 4 nos.
152. Spanner T. flocks for screwing up 2 nos.
and up-screwing inaccessible
positions
153. Spanner, adjustable 15cm. 2 nos.
154. Spanner, ring set of 12 metric sizes 6 to 32 mm. 2 nos.
155. Spanners socket with speed 2 nos.
handle, T-bar, ratchet and
universal upto 32 mm set of 28
pieces with box
156. Spirit level 2 V 250, 05 metre 2 nos.
157. Spring tension tester 1 no.
158. Stake grooving. 2 nos.
159. Stake, hatchet. 2 nos.
160. Starter motor for tractor -different 1 each
type

42
Mechanic Tractor

161. Steel measuring tape 10 meter in a 4 nos.

case
162. Steel rule 15 cm inch and metric 4 nos.
163. Steel rule 30 cm inch and metric 4 nos.
164. Steel wire Brush 50mmx150mm 4 nos.
165. Stone, carborandum 15 x 5 x 4 cm smooth and rough. 1each
166. Straight edge gauge 2 ft. 2 nos.
167. Straight edge gauge 4 ft. 2 nos.
168. Stud extractor set of 3 2 sets
169. Stud remover with socket handle 1 no.
170. Surface gauge with dial test i.e. 0.01 mm 2 nos.
indicator plunger type
171. Tachometer (Counting type) 1 no.
172. Taps and Dies complete sets (5 1 set
types)
173. Taps and wrenches - Metric 2 sets
174. Telescope gauge 4 nos.
175. Temperature gauge 0-100 deg c 2 nos.
176. Thermostat 2 nos.
177. Thread pitch gauge metric, BSW 1 no.
178. Torque wrenches 5-35 Nm, 12-68 Nm & 50-225 Nm 1 each
179. Trammel 30 cm 2 nos.
180. Turbocharger cut sectional view 1 no.
181. Tyre pressure gauge with holding 2 nos.
nipple
182. Universal puller for removing 1 no.
pulleys, bearings
183. V' Block 75 x 38 mm pair with Clamps 2 nos.
184. Vacuum gauge to read 0 to 760 mm of Hg. 2 nos.
185. Valve Lifter 1 no.
186. Valve spring compressor universal. 1 no.
187. Vernier calliper 0-300 mm with least count 0.02mm 5 nos.
188. Vice grip pliers 2 nos.
189. Voltmeter 50V/DC 4 nos.
190. Water pump for dismantling and 2 nos.
assembling
191. Wing compass 25 cm 2 nos.
192. Wire Gauge (metric) 5 nos.
193. Work bench 250 x 120 x 60 cm with 4 vices 12cm 5 nos.
Jaw
C. GENERAL INSTALLATION/ MACHINERIES
194. 3 furrow disc plough with 1 no.

43
Mechanic Tractor

scrapersyk
195. 9 tine cultivator-spring loaded 1 no.
mounted type
196. Arbor press hand operated 2 ton capacity 1 no.
197. Automotive exhaust 5 gas analyzer 1 no.
(petrol & Diesel) or Diesel Smoke
meter
198. Bench lever shears 250mm Blade x 3mm Capacity 1 no.
199. Discrete Component Trainer / 1 no.
Basic Electronics Trainer
200. Drilling machine bench to drill up 1 no.
to 12mm dia. along with
accessories
201. Gas Welding Table 1220mm x760mm 2 nos.
202. Grinding machine (general 1 no.
purpose) D.E. pedestal with 300
mm dia. wheels rough and smooth
203. Multi Scan Tool 1 no.
204. P.T.O. operated rotary lawn 1 no.
mower
205. Pneumatic rivet gun
206. Spring tension tester 1 no.
207. Tractor Diesel Engine 4 stroke for 2 nos.
Dismantling and assembling with
208. Trolley type portable air 1 no.
compressor single cylinder with 45
liters capacity Air tank,
209. Welding plant Oxy-Acetylene 1 no.
complete ( high pressure)
210. Wheel type tractor fitted with 2 nos.
diesel engine with standard
accessories
D. LIST OF CONSUMABLE:
211. Automatic Transmission oils As required
212. Battery- SMF As required
213. Brake fluids As required
214. Chalk, Prussian blue. As required
215. Chemical compound for fasteners As required
216. Diesel As required
217. Different type gasket material As required
218. Different type of oil seal As required
219. Drill Twist (assorted) As required
220. Emery paper - 36-60 grit , 80-120 As required

44
Mechanic Tractor

221. Engine coolant As required

222. Engine oil As required
223. Gear oils As required
224. Hacksaw blade (consumable) As required
225. Hand rubber gloves tested for 5 pair
5000 V
226. Holders, lamp teakwood boards, As required
plug sockets, solders, flux wires
and cables batteries round
consumable blocks and other
consumables as required
227. Hydrometer 8 nos.
228. Lapping abrasives As required
229. Leather Apron 5 nos.
230. Petrol As required
231. Power steering oil As required
232. Radiator Coolants As required
233. Safety glasses As required
234. Steel wire Brush 50mmx150mm 5 nos.
235. Engine Spare Parts As per req.
236. Gloves for Welding (Leather and 5 sets
Asbestos)
E. WORKSHOP FURNITURE
237. Book shelf (glass panel) 6ft.x 3ft. x As required
1ft.
238. Computer Chair 1+1
239. Computer Table 1+1
240. Desktop Computer CPU: 32/64 Bit i3/i5/i7 or latest 1+1
processor, Speed: 3 GHz or Higher.
RAM:-4 GB DDR-III or Higher, Wi-Fi
Enabled. Network Card: Integrated
Gigabit Ethernet, with USB Mouse,
USB Keyboard and Monitor (Min. 17
Inch. Licensed Operating System
and Antivirus compatible with trade
related software.
241. Discussion Table 8ft. x 4ft. x 2ft. 2 nos.
242. Fire Extinguishers, first- aid box As required
243. Instructional Material - NIMI As required
Books/Ref.books
244. Internet connection with all As required
accessories
245. Laser printer 1 no.

45
Mechanic Tractor

246. LCD projector/ LED /LCD TV (42") 1 no.

247. Multimedia DVD for Automotive As required
application/subjects
248. Online UPS 2KVA As required
249. Stools 21 nos.
250. Storage Rack 6ft. x 3ft. x 1ft. As required
251. Storage shelf 6ft. x 3ft. x 1ft. As required.
252. Suitable classroom furniture As required
253. Suitable Work Tables with vices As required
254. Tool Cabinet - 6ft. x 3ft. x 1ft. 2 nos.
255. Trainees locker 6ft.X 3ft. x 1ft. 2 Nos. to
accommodate
20 Lockers
Note: -
1. All the tools and equipment are to be procured as per BIS specification.
2. Internet facility is desired to be provided in the classroom.

Annexure II

The DGT sincerely acknowledges contributions of the Industries, State Directorates, Trade
Experts, Domain Experts, trainers of ITIs, NSTIs, faculties from universities and all others who
contributed in revising the curriculum.

Special acknowledgement is extended by DGT to the following expert members who had
contributed immensely in this curriculum.

List of Expert Members contributed/ participated for finalizing the course curriculum of
Mechanic Tractor trade from 19.04.2022 to 22.04.2022 at Pusa, New Delhi.
Name & Designation
S No. Organization Remarks
Sh/Mr./Ms.
1. Anil Kumar, Director CD Section, DGT, Delhi Member
2. S. Bandyopadhyay, AD CD Section, DGT, Delhi Member
3. RP Dhingra, Consultant NSDC, Delhi Member
4. Lokepal, Consultant NSDC, Delhi Member
5. Bhagat Singh, AD CSTARI, Kolkata Member
6. N. Ramesh, TO NSTI, Chennai Member
7. Sanjiv Kumar, VI NSTI, Ludhiana Member
8. Krishna Singh, AD KPMG Member

46
Mechanic Tractor

9. Vinod Kumar Dwivedi Automotive Skills Development Council Member

10. Om Prakash, Craft Instructor ITI, PUSA New Delhi Member
11. Kapil Dev CI ITI, PUSA New Delhi Member
12. Veer Singh Jayant, CI ITI, PUSA New Delhi Member
13. Amit Kumar Joshi, CI ITI, PUSA New Delhi Member
14. Amit Rohilla, CI ITI, PUSA New Delhi Member
15. Deepak Kumar, CI ITI, AKS Nizamuddin N. Delhi Member

List of Expert members participated for finalizing the course curriculum of Mechanic Tractor
Trade
Name & Designation
S No. Organization Remarks
Shri/Mr./Ms.
1. A. Ramesh, Professor IIT Chennai Chairman
2. TC Saravanabava, DDG(AT) DGE&T, HQ, New Delhi Mentor
3. K Srinivasa Rao, JDT CSTARI, Kolkata Team Leader
4. Yuvaraj C, DDT ATI, Chennai Member
5. V.Krishna Shankar, GM Ashok Leyland Member
6. G.Sathiskumar, Senior Mgr Ashok Leyland Member
7. Dr.Abhjit KR Mandal, Consultant NATRIP Member
8. M.Sivaraman, Consultant Delphi TVS Member
9. Mohan Kumar, Manager TAFE, Chennai Member
10. KanchiPurushotham,, Manager Prabha Engineers, Hosur Member
Quality
11. Sunil Bagwe, Paint shop Head Prabha Engineers, Hosur Member
12. G.M.Cholanrajan, Sr.Manager- Lanson Toyota, Chennai-107 Member
Technical Training
13. Sunil Kumar S.R, Assistant Toyota Kirloskar Motor Pvt Member
Manager Ltd Karnataka, 562 109
14. S.ArulSelvan, Asst Professor Dept Auto Engg, M.I.T, Anna Member
University, Chennai.

47
Mechanic Tractor

15. S. Jayaraj, Asst Professor Dept Auto Engg, M.I.T, Anna Member
University, Chennai.
16. R. Lakshmanan, Training Mgr Bosch Ltd, Bangalore Member
17. V.Vadivelan, Consultant NATRIP, Global Automotive Member
Research centre, Chennai
18. B. Gridharan, Managing Visa Diesel Service, Chennai Member
Director
19. VKR. Vadivelan, President Two Wheeler workshop Member
owners Association,
Chennai
20. P. Marveldass, DDT (Electronics) ATI, Chennai Member
21. Swamy S.M, Senior Officer, Toyota Kirloskar Motor Pvt Member
Training Dept Ltd Karnataka, 562 109
22. Suresh Babu, Service Manager, ABT Maruti, Chennai-32 Member
Body & Paint shop
23. M. Veerasamy, Works Manager Vishnu Cars Pvt Ltd, Chennai-43 Member
24. P.Senthil Kumar, Service DSC Motor Pvt Ltd., Chennai-15 Member
Manager
25. T.Selvan, Manager Body shop DSC Motor Pvt Ltd., Chennai-15 Member
26. G Venkatesh, ADT ATI(V), Hyderabad Member
27. SP Rewaskar, ADT ATI(V), Hyderabad Member
28. N Ramesh kumar, TO CTI, Chennai Member
29. R Rajeshkanna, TO ATI, Chennai Member
30. Akhilesh Pandey, TO ATI, Mumbai Member
31. TN Rudra, TO ATI, Howrah Member
32. A. Duraichamy, Assistant Govt ITI Coimbatore Member
Training Officer (ATO)
33. Gurcharan Singh, ADT ATI, Ludhiana Member
34. O.R. Arjun Mohan, AE Agricultural Engg. Dept, Chennai Member
35. R.Murugesan, AE Agricultural Engg. Dept, Chennai Member
36. K.Thaniyarasu, ATO Govt ITI Trichy Member
37. W. Nirmal Kumar Israel, ATO Govt ITI Trichy Member
38. N. Duraimurugan, ATO Govt ITI Guindy Member
39. K. Ravindranath, ATO Govt. ITI, Ambattur Member
40. K. Veerappan, ATO Govt. ITI, Nagapattinam Member
41. V.Palanikumar, ATO GovtITI, Pudukottai. Member
42. H.S.Kalra, Principal Govt ITI Chandigarh Member
43. B Ramarao, ATO Govt ITI, Vizag , AP Member
44. Suresh Naik, ATO Govt ITI, Mangalore , Karnataka Member
45. ND Zaware, Principal ITI, Pimpri-Chinchwad Member
46. RM Gotmare, TO ITI, Gowandi, Maharastra Member
47. Pranjit Das, DDT Govt ITI Assam Member
48. M. Madaswamy, Principal Ramco, ITC, Rajapalayam, TN Member
49. Damachadramouli, Agricultural SFMT & TI Hyderabd Member

48
Mechanic Tractor

Er
50. V. Gopalakrishnan, Training Co-ordinator, NIMI, Chennai. Member
Officer,

ABBREVIATIONS
CTS Craftsmen Training Scheme
ATS Apprenticeship Training Scheme
CITS Craft Instructor Training Scheme
DGT Directorate General of Training
MSDE Ministry of Skill Development and Entrepreneurship
NTC National Trade Certificate
NAC National Apprenticeship Certificate
NCIC National Craft Instructor Certificate
LD Locomotor Disability
CP Cerebral Palsy
MD Multiple Disabilities
LV Low Vision
HH Hard of Hearing
ID Intellectual Disabilities
LC Leprosy Cured
SLD Specific Learning Disabilities
DW Dwarfism
MI Mental Illness

49
Mechanic Tractor

AA Acid Attack
PwD Person with disabilities

50