MCQ on Management Information System.

Answer Key

1.Management information systems (MIS)

1. create and share documents that support day-today office activities
2. process business transactions (e.g., time cards, payments, orders, etc.)
3. capture and reproduce the knowledge of an expert problem solver
4. use the transaction data to produce information needed by managers to run the
business
5. none of the above
2 The term used to describe those people whose jobs involve sponsoring and funding the project
to develop, operate, and maintain the information system is
1. information worker
2. internal system user
3. systems owner
4. external system user
5. systems builder
3 The person who ensures that systems are developed on time, within budget, and with
acceptable quality is a
1. systems designer
2. project manager
3. systems owner
4. external system user
5. systems builder
4 Which one of the following is not a business driver for an information system?
1. business process redesign
2. knowledge asset management
3. proliferation of networks and the Internet
4. security and privacy
5. collaboration and partnership
5 A task of developing a technical blueprint and specifications for a solution that fulfills the
business requirements is undertaken in the following phase of the system development
process
1. system initiation
 2. system implementation
3. system analysis

4. system design
5. feasibility analysis
6 If a university sets up a web-based information system that faculty could access to record
student grades and to advise students, that would be an example of a/an
1. CRM
2. intranet
3. ERP
4. extranet
5. none of the above
7 Which of the following is not a technology driver for an information system?
1. enterprise applications
2. object technologies
3. knowledge asset management
4. collaborative technologies
5. networks and the Internet
8 Which of the following is a deliverable of the system implementation phase in a formal
system development process?
1. technical hardware and software solution for the business problem
2. business problem statement
3. statement of the system users’ business requirements
4. technical blueprint and specifications for a solution that fulfills the business requirements
5. none of the above
9 An information system that supports the planning and assessment needs of executive
management is
1. DSS
2. TPS
3. ERP
4. MIS
5. none of the above
10 Decision makers who are concerned with tactical (short-term) operational problems and
decision making are
 1. middle managers
2. executive managers
3. supervisors
4. mobile managers
5. none of the above
11 The application of information to scan an organisation’s environment is:
1. external communication.
2. information overload.
3. sensing.
4. internal communication.
5. none of the above.
12When a bank uses information to launch a personalised credit card product this:
1. manages risks.
2. creates a new opportunity.
3. adds value.
4. reduces costs.
5. none of the above.
13 When a bank uses business performance management software to monitor its performance in
differences regions this:
1. reduces costs.
2. manages risks.
3. adds value.
4. creates a new opportunity.
5. none of the above.
14 When a bank offers web self-service for customers to answer their questions, the primary
outcome is:
1. adds value.
2. manages risks.
3. reduces costs.
4. creates a new opportunity.
5. none of the above.
15 The general transformation cycle for information is:
1. information to data to knowledge.
2. knowledge to data to information.
3. data to knowledge to information.
 4. data to information to knowledge.
5. none of the above.
16 The most important attribute of information quality that a manager requires is:
1. relevance.
2. media.
3. presentation.
4. timeliness.
5. none of the above.
17 To improve the performance of a business process, which of the following is most relevant?
1. Input.
2. Processing.
3. All of the above.
4. Control and feedback
5. Output.
18 Monitoring the legal constraints which a company operates under requires review of:
1. a company’s customers.
2. a company’s outputs.
3. a company’s macro-environment.
4. a company’s micro-environment.
5. all of the above.
19 The majority of publically available Internet information sources are:
1. created in XML.
2. structured information.
3. normal information.
4. unstructured information.
5. none of the above.
20 Records management:
1. is a discipline limited to digitised paper documents.
2. is a discipline limited to library books.
3. is a discipline limited to paper documents.
4. is a discipline limited to information contained in databases.
5. none of the above.

21 Which of the following should be represented on an information flow diagram?

 1. Entity
2. Source
3. Process
4. Attribute
5. Database
22 A web blueprint depicts:
1. the layout of an individual web page
2. the layout of the home page
3. the layout of an index page
4. the layout of a website
5. the layout of a sitemap
23 UML depicts information systems as a collection of:
1. Entities
2. Processes
3. Data
4. Information
5. Objects
24 Which of the following statements describes a taxonomy?
1. A browsable hierarchy
2. A list of equivalent terms
3. A complex controlled vocabulary showing relationships
25 Which of the following statements about XML schemas is incorrect?
1. Schemas can specify integer values
2. Schemas are defined by XSD tag
3. All XML documents must have a schema
4. Schemas provide data oriented data types
5. They offer more flexibility than DTDs
26 Which of the following relates to enterprise interoperability?
1. DFD
2. Information flow diagram
3. XML
4. Entity relationship diagram
27 Which of the following is not a type of navigation system for a web site?
1. National
 2. Global
3. Contextual
4. Local
5. Regional
28 What should not be part of an acceptable use policy?
1. Allowable use of systems
2. Legal obligations
3. Encryption policies
4. User responsibilities
5. Account and password responsibilities 29 Use-case analysis focuses upon:

1. data
2. Objects
3. Entities
4. Actors
30 Which of the following is part of a static view of information?
1. Logical data model
2. Meta data
3. Data flow model
4. Information process model
31Contemporary Information Systems are interfacing with customers and suppliers using :
1. BPR
2. CRM
3. SCM
4. Both A and B
5. Both B and C
32 Information systems that support the business functions that reach out to suppliers are known
as:
1. back office information systems
2. decision support systems
3. expert information systems
4. front office information systems
5. none of the above
33 Which of the following is not a class of information system applications?
1. database management system
 2. decision support system
3. expert system
4. management information system
5. office automation system
34 Who are the people that actually use the system to perform or support the work to be
completed?
1. system analysts
2. system designers
3. system owners
4. system builders
5. none of the above
35 Which is not a typical business function?
1. Sales
2. Service
3. Manufacturing
4. Accounting
5. Benefits and Compensation
36 The flow of transactions through business processes to ensure appropriate checks and
approvals are implemented is called:
1. procedures
2. work flow
3. process flow
4. process requirements
5. procedures
37 Language-based, machine-readable representations of what a software process is supposed to
do, or how a software process is supposed to accomplish its task is known as:
1. prototyping
2. software specifications
3. application programs
4. human engineering
5. none of the above
38 A specification of how the user moves from window to window, interacting with the
application programs to perform useful work is called:
1. interface specifications
2. software specifications
 3. user dialog
4. prototyping specifications
5. navigation specification
39 Examples of keyless interfaces include:
1. bar coding, OCR, pen, and voice recognition
2. mouse, OCR, pen, and voice recognition
3. keyboard, OCR, pen, and voice recognition
4. all of the above
5. none of the above
40 Open database connectivity (OBDC) tools are an example of:
1. layerware
2. tool kit
3. interfaceware
4. middleware
5. none of the above

Information Systems Development

41 The first CMM level at which measurable goals for quality and productivity are established is
1. Level 1
2. Level 2
3. Level 3
4. Level 4
5. Level 5
42 Project Management ensures that
1. project’s risk is assessed
2. project’s feasibility is assessed
3. system is developed at minimum cost
4. both A and B
5. none of the above
43 The deliverable of the problem analysis phase is
1. system improvement objectives
2. problem statement
3. statement of constraints
4. statement of work
5. none of the above
44 Which one is NOT a category of problems represented by the PIECES framework?
1. control
2. efficiency
3. service
4. economics
5. technology
45 Which one is NOT a phase of the systems development life cycle?
1. problem analysis
2. scope definition
3. requirements analysis
4. post-implementation review
5. decision analysis
46 A cross life-cycle activity of system development is
1. object modeling
2. prototyping
3. fact-finding
4. data modeling
5. data flow diagram modeling
47 An ongoing activity of systems support is
1. assisting users
2. adapting the system to new requirements
3. recovering the system
4. fixing software defects
5. all of the above
48 Rapid Application Development (RAD) strategy includes all of the following, except
1. actively involves system users in the analysis, design, and construction activities
2. uses waterfall development approach to evolve system concept
3. organizes systems development into a series of focused, intense workshops
4. reduces the amount of time that passes before the users begin to see a working
system
5. accelerates the requirements analysis and design phases 49 Request for quotation
(RFQ) is

1. a document that compares business and technical requirements of a commercial

application package against the capabilities and features of a specific commercial
application package
 2. a document that communicates business, technical, and support requirements for an
application software package to vendors that wish to compete for the sale of that
application package and services
3. a document that communicates business, technical, and support requirements for an
application software package to a single vendor that has been determined as being
able to supply that application package and service
4. a contract with management and the user community to develop or enhance an
information system
5. none of the above
50 Which of the following phases is unique to the commercial application package
implementation strategy as opposed to the rapid application development strategy
1. problem analysis
2. construction and testing
3. scope definition
4. requirements analysis
5. business process design
51 A model-driven analysis approach that focuses on the structure of stored data in a system
rather than on processes is
1. structured analysis
2. information engineering
3. rapid architected analysis
4. object-oriented analysis
5. none of the above
52 All of the following are phases of systems analysis, except
1. decision analysis phase
2. requirements analysis phase
3. design analysis phase
4. problem analysis phase
5. scope definition phase
53 Which of the following analysis techniques derive system models from existing system or
discovery prototypes?
1. rapid architected analysis
2. object-oriented analysis
3. data modeling
4. discovery prototyping
5. structure analysis
54 Prototypes are used in
1. model-driven analysis
2. object-oriented analysis
3. traditional approaches
4. accelerated systems analysis
5. structured analysis
55 Which of the following is NOT a feasibility analysis criterion?
1. technical feasibility
2. schedule feasibility
3. operational feasibility
4. economic feasibility
5. resource feasibility
56 Which of the following phases identifies and expresses requirements, prioritizes
requirements, updates project plan, and communications the requirements statement?
1. logical design phase
2. decisions analysis phase
3. problem analysis phase
4. systems analysis phase
5. none of the above
57 The tasks of defining acceptance tests, structuring functional requirements, and validating
functional requirements are performed in which one of the phases?
1. problem analysis phase
2. decision analysis phase
3. systems analysis phase
4. logical design phase
5. none of the above
58 The task of establishing system improvement objectives is performed in which phase of
systems analysis?
1. problem analysis phase
2. logical design phase
3. scope definition phase
4. physical design phase
5. requirements analysis phase
59 The task of identifying and expressing system requirements is performed in which phase of
systems analysis?
 1. problem analysis phase
2. logical design phase
3. scope definition phase
4. requirements analysis phase
5. none of the above
60 Cause-and-effect analysis is performed in the following phase of systems analysis
1. scope definition phase
2. logical design phase
3. requirements analysis phase
4. physical design phase
5. problem analysis phase
61 A property or quality the system must have is called a:
1. scope
2. functional requirement
3. preliminary requirement
4. nonfunctional requirement
5. none of the above
62 The process of requirements discovery consists of the following activities, except
1. requirements management
2. sampling of existing documentation, forms and files
3. requirements discovery
4. problem discovery and analysis
5. documenting and analyzing requirements
63 Which one is NOT a common fact-finding technique?
1. prototyping
2. interviews
3. research and site visits
4. sampling of existing documents, forms, databases
5. reverse engineering
64 A fact-finding technique that involves a large number of observations taken at random
intervals is called:
1. randomization
2. stratification
3. people sampling
 4. work sampling
5. none of the above
65 Which one of the following fact-finding techniques is an inexpensive means of gathering data
from a large number of individuals?
1. observations
2. work sampling
3. interviews
4. proxemics
5. none of the above
66 Randomly sampling ten invoices based on a given sample size would be an example of
1. stratification
2. closed-ended sampling
3. observation
4. open-ended sampling
5. none of the above
67 All of the following are examples of requirements problems, except
1. missing requirements
2. overlapping requirements
3. costly requirements
4. conflicting requirements
5. ambiguous requirements
68 Which of the following types of questions should not be asked on an interview?
1. closed-ended questions
2. biased questions
3. open-ended questions
4. loaded questions
5. both (b) and (d)
69 Which of the following is an advantage of discovery prototyping?
1. serves as a training mechanism for users
2. allows users and developers to experiment with the software and develop an
understanding of how the system might work
3. aids in building system test plans and scenarios
4. aids in determining the feasibility and usefulness of the system before high development
costs are incurred
5. all of the above
70 Which of the following is NOT a guideline for successfully conducting a Joint Requirements
Planning (JRP) session?
1. stay on schedule
2. allow for ample breaks
3. encourage user and management participation
4. brainstorm technical alternatives to problems identified in a JRP session
5. ensure that the scribe is able to take notes
71 The person generally responsible for the program design strategy, standards, and construction
is called a(n):
1. program librarian
2. backup chief programmer
3. network designer
4. chief programmer
5. systems analyst
72 Which one of the tests is performed on a subset of a program?
1. subset test
2. unit test
3. stub test
4. program test
5. system test
73 Which of the following is the last phase of the Systems Construction phase?
1. build and test databases
2. write and test new programs
3. prepare conversion plan
4. build and test networks
5. none of the above
74 Which installation strategy is a variation on the abrupt and parallel conversion?
1. location conversion
2. staged conversion
3. partial conversion
4. hierarchical conversion
5. none of the above
75 Which of the following is(are) the task(s) of the Systems Conversion phase?
1. prepare conversion plan
2. train users
 3. convert to new system
4. build and test networks
5. none of the above
76 Which of the tests is a final system test performed by end users using real data over an
extended period of time?
1. final test
2. complete test
3. systems acceptance test
4. parallel test
5. none of the above
77 Which of the following is(are) the primary inputs into the task of writing and testing new
programs?
1. programming plan
2. database structure
3. test data
4. integration requirements
5. both (a) and (c)
78 Which of the following is the first phase of the Systems Implementation phase?
1. conduct system test
2. build and test networks
3. prepare conversion plan
4. build and test databases
5. write and test new programs
79 Which of the following is(are) the deliverables of the Systems Implementation phase?
1. training materials
2. functional system
3. physical design specification
4. operational system
5. none of the above
80 Which of the following is(are) the inputs to the Systems Construction phase?
1. design prototypes
2. redesigned business processes
3. physical design specifications
4. documentation
5. all of the above
81 Which of the following is(are) an input process method(s)?
1. smart card
2. biometric
3. optical mark
4. point-of-sale
5. all of the above
82 A form used to record data about a transaction is a(n)
1. batch document
2. source document
3. on-line document
4. data entry document
5. none of the above 83 Combination checks:

1. determine data entry errors on primary keys

2. ensure that the correct type of data is input
3. determine whether a known relationship between two fields is valid
4. determine whether all required fields of the input have actually been entered
5. none of the above
84 Which of the following is NOT an advanced input control?
1. radio button
2. slider edit calendar
3. spin box
4. both (a) and (c)
5. Internet hyperlink
85 If you need a student to select from a list of eighty courses of the university’s on-line
catalogue, your best choice for a GUI control would be:
1. check box
2. radio buttons
3. drop-down list
4. combination box
5. Internet hyperlink
86 If you need to collect employee status information (e.g., full-time vs. part-time) on a
computer screen, your best choice for a GUI control would be:
1. drop-down list
2. masked edit control
 3. radio buttons
4. spin box
5. none of the above
87 Remote batch processing has the following characteristic(s):
1. Data is entered online.
2. Data is collected in batches.
3. Data is processed at a later time.
4. both (a) and (b) and (c)
5. none of the above
88 Optical character recognition:
1. is less prevalent than optical mark recognition
2. is used on forms for subjective-based questions on exams
3. requires the user to carefully handwrite input data on a business form
4. both (a) and (c)
5. both (a) and (b) and (c)
89 Which of the following advanced input controls provides a nonnumeric means of selecting a
value?
1. ellipsis control
2. Internet hyperlink
3. check list box
4. slider edit calendar
5. none of the above
90 In cases where the data item has a large number of predefine values and screen space is tight,
the following GUI control should be used for an input:
1. combination box
2. drop-down list
3. list box
4. ellipsis control
5. none of the above
91 Which of the following reports presents information with little or no filtering or restrictions?
1. non-filtered

2. summary
3. external
4. exception
 5. none of the above
92 A list of the names of all customers who purchased only one product within a six-month
period would be an example of a(n):
1. detailed report
2. summary report
3. exception report
4. external report
5. none of the above
93 A listing of the names and addresses of all the employees for an organization would be an
example of a(n):
1. detailed report
2. summary report
3. external report
4. exception report
5. none of the above
94 The most common medium for computer outputs is:
1. screen
2. paper
3. e-mail
4. microfilm
5. none of the above
95 Which of the following reports categorizes information for managers who are not interested
to wade through the details?
1. external
2. detailed
3. exception
4. supplemental
5. none of the above
96 A turnaround output is an example of
1. internal output
2. external output
3. summary output
4. exception output
5. none of the above
97 A count of the number of students who earned A, B, C, D, and F grades in a given course
would be an example of a(n):
1. external report
2. summary report
3. detailed report
4. exception report
5. none of the above
98 Which kind of chart is useful for comparing series or categories of data, each in its own bar?
1. line chart
2. pie chart
3. scatter char
4. bar chart
5. none of the above
99 Which of the following is NOT a general principle for output design?
1. The distribution of (or access to) computer outputs must be sufficient to assist all relevant
users.
2. The computer outputs should be designed with automated tools.
3. The computer outputs must be acceptable to the system users.
4. Computer outputs should be simple to read and interpret.
5. The timing of computer outputs is important. Output information must reach recipients
while the information is pertinent to transactions or decisions.
100 Which of the following is(are) the step(s) in the output design process?
1. specify physical output requirements
2. identify system outputs and review logical requirements
3. design, validate, and test outputs
4. design any preprinted forms
5. all of the above