Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Comeup Wireless Remote Control

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Wireless Remote Control

2.4GHz technology eliminates interference and saves power

COMEUP wireless remote control communicates by a 2.4GHz digital transmission


frequency. It delivers a reliable connection covering up to 27m diameters without
interference. Users will experience virtually no interference and no time-lag operation
when multiple devices are used in the same working area. The two-way communica-
tions provides feedback on signal receiving and it requires no manual configuration.
It’s easy to install. By simple plug-and-play, it starts working within seconds. Each
pairing transmitter links up and stays linked automatically. You never have to worry
about anyone having the same frequency. The sooner they are installed, the faster
they work.
COMPARISON CHART
Item RF-24A RF-24B RF-24C RF-24D WA-0823 WA-0824 X Brand
PN 880609 880608 881262 881286 881168 881170

Seal 9.5rs Seal 9.5rsi


Application DC WINCH ATV DC WINCH Cub
(built-in) (built-in)

Waterproof
Quick Connector 3 pin Terminal 6 pin 6 pin 6 pin
Terminal
Input Voltage 8-24V (26V also available) 8-26V
Frequency 2.4 GHz 433 MHz
Signal Digital signal Analog signal

Signal Receiving Two ways, including feedback function One way

Time Receiving Synchronous w/o lag 0.4 sec. lag

Interference Never in-band interference Have in-band interference


Waterproof
IP 66
Grade
Certificate FCC、CE FCC、CE

Pushing Button 3 buttons 2 buttons


Press both cable in and
Starting Press power button for 5 seconds out buttons simultane-
ously for 5 seconds
Remote Range 15 - 27 m 15 - 27 m

Battery 3V Lithium battery x 1 12V Alkaline batteries x 2


Europe: 433/868 MHz
Applicable Area Worldwide (Including America, Europe, Asia, Australia, Africa) Asia: 315/433 MHz
Australia: 433/915 MHz

Besides the function


1. Green LED for power on mentioned left-hand,
2. Red LED for winching including warning signal Power on and off
Functions
3. Blinking green LED for low battery life for motor over-heating indicators only
4. Blinking red LED for poor signal received and signal receiving
confirmation

www.comeupwinch.com | COMEUP INDUSTRIES INC. | E-mail: winch@comeup.com.tw


Wireless Remote Control
2.4GHz technology eliminates interference and saves power

FEATURES
Work with any 12 or 24 volt solenoid-switched ATV/UTV and automotive winches.
2.4 GHz wireless technology works within 27m range and the anti-interference function lets you
move around an obstacle for winching.
Stylish and ergonomic design fits comfortably with your hand.
Switch power on after a 5-second continuous press on the button for safety work.
Automatically power off after a 5-minute silence for safety work and for conserving battery life.
The transmitter can be self-coded, simplifying installation and replacement.

Wiring harness with built-in antenna


designs for quick installation and easy
wireless operation

2.4 GHz high frequency device features


never in-band interference within 27m range
IP66 waterproof transmitter
and receiver ensure all weather
protection Colour LED indicates different winching conditions

Press here to loose the


transmitter from holder Transmitter holder for Cub Series

DIMENSION mm/in

www.comeupwinch.com | COMEUP INDUSTRIES INC. | E-mail: winch@comeup.com.tw

You might also like