VMS500 Hardware

HARDWARE
Analyzing Computer
 Microprocessor based On Line
Vibration Monitoring System
Preferentially used for Hydro Power
Applications.
 Upto 8/16/32 Analog Inputs
 Calculates peak-peak values and
Average values from Proximity
Transducers.
 Calculates Alarm and trip for each
Transducers.
 All current values are displayed Ethernet Cable Ethernet Cable
on the screen and stored for future use.
 Easy trending data on the screen.
 Front Flush Type mounting for Measuring Measuring
Station Station
19’’ rack Unit# 1 Unit# 2
Measuring Computer:
The VSM 500 Measuring Station hardware Multi Conduit cable Multi Conduit cable
is built in standard 19” rack. It consists of:
 Local LCD display 14” Touch Screen
 Upto 12 Channel Relay card with 2 No
& 2 NC per channel potential free contact UNIT # 1 UNIT # 2
Junction Boxes Junction Boxes
Proximity, Proximity,
AccelerometerTransducer & AccelerometerTransducer &
Tacho. Tacho.
Block Diagram for 2 Nos. VMS 500 Measuring and Analyzing

Station in a LAN configuration
Vibration Input Module : VCIM-xxx
 Input: 0-10V, 0-20V, 4-20 mA, Digital

 Channels: 4/6/8/16 Channels for Proximity
3/4/8 Channels for Accelerometer
2 Channels for Tachometer
 Storing Capacity upto 240 GB SSD  Optional:- Buffered Transducer output: BNC
 2/4 GB RAM connectors for each channel for taking buffered
Analyzing Computer: DELL/HP Make output.
Intel Core i3-6500 6th Generation Processor
/ 3MB Cache /4GB DDR RAM / 1TB SATA Relay Output Module -RC 12
HDD @ 5400 rpm / On Board 10/100/1000 Relays: 2 NO & 2NC contacts for each channel
Gigabit LAN Card / USB Mouse /USB Keyboard /
(Maximum 12 Relays)
Win 10 Professional or better
8A/250V rating
Potential free contacts
HARDWARE
Diagnosis & Analysis Tools /Features
Proximity Transducer
The Pro ximity P robe, is an "Ed dy C urrent Prob e"  System Configuration: Manually configure the
also call ed "Displacement Trans ducer", i s a parameters to ensure the system operates normally or
permanently mounted un it, a nd requ ires a sign al- add/change parameters in future.
conditioning a mplifier t o genera te an o utput voltage  Data acquisition: Accurately collect vibration signals
proportional to t he dist ance b etween the tran sducer and the revolution and other procedure parameters
end and the sha ft. Differe nt measuring rang e a re continuously and synchronistically in the full period.
available as per customer’s requirement.  Real-time monitoring: The monitored data could be
displayed in real time with the main monitoring graph,
It o perates o n a magnetic p rinciple, and is thu s bar chart, data sheet, curve, etc.
sensitive t o magnetic anomalies i n the s haft, c are  Alarm monitoring: Automatic Alarm monitoring and
should be t aken t hat the shaft is not magnetized to recording
assure the output signal is not contaminated.  Optional Tripping: Machine tripping can be provided
using dry contacts
 Data management: Store & Maintain relevant data
and form historical database and maintains them.
Tachometer Transducer  Trend analysis: Trending analysis of one or more
parameters with respect to certain parameters
A Tachometer (also ca lled a revolution-counter, rev-  Orbit Analysis: Plotting of shaft center line plot using
counter, or RPM gauge) is an instrument that measures the two orthogonally mounted probes per plain
rotation speed of a shaft or disk , as in a motor, Generator or  Vibration analysis: Powerful vibration analysis
other machine. Th e dev ice u sually d isplays the RP M functions are provided including time domain analysis,
through digital display on the screen. frequency domain analysis and trend analysis along
with comparative analysis
A ta chometer is u sed to measure the speed of th e shaft  Event List: Record the details of alarms
(RPM) & P hase a nd re turns p er p ulse per revo lution. The  Report printing: Printing of reports and signal
output p ulse acts as a reference po int to co rrectly iden tify analysis charts as available
each rotating part of the machine.  Network communication: Communicates with any
Remote Analysis Computer through Ethernet Port
 Communication with Plant SCADA/DCS system:
Through Modbus/OPC protocol
Power Supply
 +24V OR + 12 V DC Output Environmental
Power supply Operating Temperature : 0° - 65° C
 Input Voltage: 120 Vdc-240 Vdc, Storage Temperature : 0° - 80° C
100Vac-240 Vac
(50/60Hz) Physical Characteristics*
Height : 310 mm
Width : 482 mm
Depth : 134 mm
Panel Cutout Dimension*

Height : 305 mm
* Logic Plus Plus reserves the right to change specifications to improve products Width : 450 mm
without notification or as per customer requirement
Logic Plus Plus India Pvt. Ltd.

F-4, First Floor, Sector 27, Noida - 201 301
Ph: +91-120- 4222460-62 Fax: +91-120-4327624
E-mail: logicpp@logicplusplus.com An ISO 9001:2008 Certified Company

VMS500 Hardware

Uploaded by

Copyright:

Available Formats

VMS500 Hardware

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VMS500 Hardware

Uploaded by

Copyright:

Available Formats

HARDWARE

Junction Boxes Junction Boxes

Block Diagram for 2 Nos. VMS 500 Measuring and Analyzing

Vibration Input Module : VCIM-xxx

 Input: 0-10V, 0-20V, 4-20 mA, Digital

Panel Cutout Dimension*

Logic Plus Plus India Pvt. Ltd.

You might also like