Batteries: Electricity though chemical reactions

Batteries consist of one or more electrochemical cells that store chemical energy for later conversion to electrical energy.
Batteries are used in many day-to-day devices such as cellular phones, laptop computers, clocks, and cars. Batteries are
composed of at least one electrochemical cell which is used for the storage and generation of electricity. Though a variety of
electrochemical cells exist, batteries generally consist of at least one voltaic cell. Voltaic cells are also sometimes referred to as
galvanic cells. Chemical reactions and the generation of electrical energy is spontaneous within a voltaic cell, as opposed to
the reactions electrolytic cells and fuel cells.

Introduction
It was while conducting experiments on electricity in 1749 that Benjamin Franklin first coined the term "battery" to describe
linked capacitors. However his battery was not the first battery, just the first ever referred to as such. Rather it is believed that
the Baghdad Batteries, discovered in 1936 and over 2,000 years old, were some of the first ever batteries, though their exact
purpose is still debated.
Luigi Galvani (for whom the galvanic cell is named) first described "animal electricity" in 1780 when he created an electrical
current through a frog. Though he was not aware of it at the time, this was a form of a battery. His contemporary Alessandro
Volta (for whom the voltaic cell and voltaic pile are named) was convinced that the "animal electricity" was not coming from
the frog, but something else entirely. In 1800, his produced the first real battery: the voltaic pile.
In 1836, John Frederic Daniell created the Daniell cell when researching ways to overcome some of the problems associated
with Volta's voltaic pile. This discovery was followed by developments of the Grove cell by William Robert Grove in 1844;
the first rechargeable battery, made of a lead-acid cell in 1859 by Gaston Plante; the gravity cell by Callaud in the 1860s; and
the Leclanche cell by Georges Leclanche in 1866.
Until this point, all batteries were wet cells. Then in 1887 Carl Gassner created the first dry cell battery, made of a zinc-carbon
cell. The nickel-cadmium battery was introduced in 1899 by Waldmar Jungner along with the nickel-iron battery. However
Jungner failed to patent the nickel-iron battery and in 1903, Thomas Edison patented a slightly modified design for himself.
A major breakthrough came in 1955 when Lewis Urry, an employee of what is now know as Energizer, introduced the
common alkaline battery. The 1970s led to the nickel hydrogen battery and the 1980s to the nickel metal-hydride battery.
Lithium batteries were first created as early as 1912, however the most successful type, the lithium ion polymer battery used in
most portable electronics today, was not released until 1996.

Voltaic Cells
Voltaic cells are composed of two half-cell reactions (oxidation-reduction) linked together via a semipermeable membrane
(generally a salt bath) and a wire (Figure 1). Each side of the cell contains a metal that acts as an electrode. One of the
electrodes is termed the cathode, and the other is termed the anode. The side of the cell containing the cathode is reduced,
meaning it gains electrons and acts as the oxidizing agent for the anode. The side of the cell containing the anode is where
oxidation occurs, meaning it loses electrons and acts as the reducing agent for the cathode. The two electrodes are each
submerged in an electrolyte, a compound that consists of ions. This electrolyte acts as a concentration gradient for both sides
of the half reaction, facilitating the process of the electron transfer through the wire. This movement of electrons is what
produces energy and is used to power the battery.
The cell is separated into two compartments because the chemical reaction is spontaneous. If the reaction was to occur without
this separation, energy in the form of heat would be released and the battery would not be effective.

11/10/2020 Batteries.1 https://chem.libretexts.org/@go/page/287

 Figure 1: A Zinc-Copper Voltaic cell. The voltaic cell is providing the electricity needed to power the light-bulb.

Types of Batteries

Figure 2: Primary versus Secondary Batteries. Primary batteries (left) are non-rechargeable and disposable. Secondary
batteries (right) are rechargeable, like this cellular phone battery.

Primary Batteries
Primary batteries are non-rechargeable and disposable. The electrochemical reactions in these batteries are non-reversible. The
materials in the electrodes are completely utilized and therefore cannot regenerate electricity. Primary batteries are often used
when long periods of storage are required, as they have a much lower discharge rate than secondary batteries.
Use of primary batteries is exemplified by smoke detectors, flashlights, and most remote controls.

Secondary Batteries
Secondary batteries are rechargeable. These batteries undergo electrochemical reactions that can be readily reversed. The
chemical reactions that occur in secondary batteries are reversible because the components that react are not completely used
up. Rechargeable batteries need an external electrical source to recharge them after they have expended their energy.
Use of secondary batteries is exemplified by car batteries and portable electronic devices.

Battery Cell Types

Wet Cells
Wet cell batteries contain a liquid electrolyte. They can be either primary or secondary batteries. Due to the liquid nature of
wet cells, insulator sheets are used to separate the anode and the cathode. Types of wet cells include Daniell cells, Leclanche
cells (originally used in dry cells), Bunsen cells, Weston cells, Chromic acid cells, and Grove cells. The lead-acid cells in
automobile batteries are wet cells.

11/10/2020 Batteries.2 https://chem.libretexts.org/@go/page/287

 Figure 3: A lead-acid battery in an automobile.

Dry Cells
In dry cell batteries, no free liquid is present. Instead the electrolyte is a paste, just moist enough to allow current flow. This
allows the dry cell battery to be operated in any position without worrying about spilling its contents. This is why dry cell
batteries are commonly used in products which are frequently moved around and inverted, such as portable electronic devices.
Dry cell batteries can be either primary or secondary batteries. The most common dry cell battery is the Leclanche cell.

Battery Performance
The capacity of a battery depends directly on the quantity of electrode and electrolyte material inside the cell. Primary batteries
can lose around 8% to 20% of their charge over the course of a year without any use. This is caused by side chemical reactions
that do not produce current. The rate of side reactions can be slowed by lowering temperature. Warmer temperatures can also
lower the performance of the battery, by speeding up the side chemical reactions. Primary batteries become polarized with use.
This is when hydrogen accumulates at the cathode, reducing the battery's effectiveness. Depolarizers can be used to remove
this build up of hydrogen.
Secondary batteries self-discharge even more rapidly. They usually lose about 10% of their charge each month. Rechargeable
batteries gradually lose capacity after every recharge cycle due to deterioration. This is caused by active materials falling off
the electrodes or electrolytes moving away from the electrodes.
Peukert's law can be used to approximate relationships between current, capacity, and discharge time. This is represented by
the equation
Qp
t = (Batteries.1)
k
K

where I is the current, k is a constant of about 1.3, t is the time the battery can sustain the current, and Qp is the capacity when
discharged at a rate of 1 amp.

Current, Voltage, and Standard Reduction Potential

There is a significant correlation between a cell's current and voltage. Current, as the name implies, is the flow of electrical
charge. Voltage is how much current can potentially flow through the system. Figure 4 illustrates the difference between
current and voltage.

11/10/2020 Batteries.3 https://chem.libretexts.org/@go/page/287

 Figure 4: The difference between voltage and current.
Water is flowing out of a hose and onto a waterwheel, turning it. Current can be thought of as the amount of water flowing
through the hose. Voltage can be thought of as the pressure or strength of water flowing through the hose. The first hose does
not have much water flowing through it and also lacks pressure, and is consequently unable to turn the waterwheel very
effectively. The second hose has a significant amount of water flowing through it, so it has a large amount of current. The third
hose does not have as much water flowing through it, but does have something blocking much of the hose. This increases the
pressure of the water flowing out of the hose, giving it a large voltage and allowing the water to hit the waterwheel with more
force than the first hose.
Standard reduction potential, Eo, is a measurement of voltage. Standard reduction potential can be calculated with the
knowledge that it is the difference in energy potentials between the cathode and the anode: Eocell = Eocathode − Eoanode. For
standard conditions, the electrode potentials for the half cells can be determined by using a table of standard electrode
potentials.
For nonstandard conditions, determining the electrode potential for the cathode and the anode is not as simple as looking at a
table. Instead, the Nernst equation must be used in to determine Eo for each half cell. The Nernst equation is represented by ,
where R is the universal gas constant (8.314 J K-1 mol-1), T is the temperature in Kelvin, n is the number of moles of electrons
transferred in the half reaction, F is the Faraday constant (9.648 x 104 C mol-1), and Q is the reaction quotient.

Different Sizes of Batteries and Some Additional Facts

Batteries vary both in size and voltage due to the chemical properties and contents within the cell. However, batteries of
different sizes may have the same voltage. The reason for this phenomenon is that the standard cell potential does not depend
on the size of a battery but rather on its internal content. Therefore, batteries of different sizes can have the same voltage
(Figure 5). Additionally, there are ways in which batteries can amplify their voltages and current. When batteries are lined up
in a series of rows it increases their voltage, and when batteries are lined up in a series of columns it can increases their
current.

11/10/2020 Batteries.4 https://chem.libretexts.org/@go/page/287

Figure 5: Four batteries of different sizes all of 1.5 voltage

Hazards
Batteries can explode through misuse or malfunction. By attempting to overcharge a rechargeable battery or charging it at an
excessive rate, gases can build up in the battery and potentially cause a rupture. A short circuit can also lead to an explosion. A
battery placed in a fire can also lead to an explosion as steam builds up inside the battery. Leakage is also a concern, because
chemicals inside batteries can be dangerous and damaging. Leakage emitted from the batteries can ruin the device they are
housed in, and is dangerous to handle. There are numerous environmental concerns with the widespread use of batteries. The
production of batteries consumes many resources and involves the handling of many dangerous chemicals. Used batteries are
often improperly disposed of and contribute to electronic waste. The materials inside batteries can potentially be toxic
pollutants, making improper disposal especially dangerous. Through electronic recycling programs, toxic metals such as lead
and mercury are kept from entering and harming the environment. Consumption of batteries is harmful and can lead to death.

Homemade Batteries
Any liquid or moist object that has enough ions to be electrically conductive can be used to make a battery. It is even possible
to generate small amounts of electricity by inserting electrodes of different metals into potatoes, lemons, bananas, or
carbonated cola. A voltaic pile can be created using two coins and a paper dipped in salt water. Stacking multiple coins in a
series can results in an increase in current.

Practice Problems
Problems
1. Yes/No
1. Will adding batteries that are lined up in a row amplify the overall voltage of the batteries?
2. Do electrolytic cells undergo non-spontaneous chemical reactions?
3. Are rechargeable batteries also known as disposable batteries?
4. Can batteries of different sizes have the same voltage?
2. T/F
1. In primary cells all of the components in the electrodes are almost always completely used.
2. Primary and secondary cells differ in their cathode and anode properties.
3. Redox reactions play a critical role in the cells within batteries.
4. The cathode in a voltaic cell gains electrons.
3. Determine the standard electrode potential of a voltaic cell within a Leclanche (Dry) cell with half cell voltages of .875V at
the graphite cathode and .253V at the zinc anode.
4. Determine the standard electrode potential with given half cell voltages of .987V at the cathode and .632V at the anode.
5. Explain why rechargeable batteries might be advantageous over disposable batteries.

Solutions
1. Yes/No
1. Yes
2. Yes
3. No
4. Yes
2. T/F
1. True
2. False
3. True
4. True
3. E0cell=E0(cathode)-E0(anode)

11/10/2020 Batteries.5 https://chem.libretexts.org/@go/page/287

 E0celll= 0.875V - 0.253V = 0.622v
4. E0cell=E0(cathode)-E0(anode)
E0cell= 0.987V -0.632V = 0.355V
5. Even though disposable batteries are cheaper initially and easier to make, the longer lifespan of rechargeable batteries is
often more efficient and useful. Rechargeable batteries mean less waste, as less batteries need to be made and less are disposed
of in land-fills or through recycling programs. Rechargeable batteries are also more convenient as changing batteries is no
longer required. This is especially beneficial in portable electronic devices. Also, because the components in a secondary cell
are reusable, rechargeable batteries will generally cost less than disposable batteries in the long run.

References
1. Harwood, William, Herring, Geoffrey, Madura, Jeffry, and Petrucci, Ralph. General Chemistry: Principles and Modern
Applications. Ninth Edition. Upper Saddle River, New Jersey: Pearson Prentice Hall, 2007.
2. Kiehne, H.A. Battery Technology Handbook. Second Edition. Renningen-Malsheim, Germany: Expert Verlag, 2003.

Contributors
Abheetinder Brar (UCD)

11/10/2020 Batteries.6 https://chem.libretexts.org/@go/page/287