Physics LAB Report Simple Pendulum
Physics LAB Report Simple Pendulum
Physics LAB Report Simple Pendulum
2 . Objective:
To calculate the acceleration due to gravity g at Addis Ababa
To demonstrate how the length of the string and mass of the
pendulum bob affects the simple pendulum’s period
4. Theory:
A weight suspended from a pivot such that it can freely swing is called a pendulum. Gravity's
restoring force will cause a pendulum to accelerate back toward its equilibrium position if it is
sideways moved from its resting, equilibrium position. When the pendulum is freed, the restoring
force acting on its mass causes it to oscillate, swinging back and forth, about its equilibrium point. The
period is the length of time required for one full cycle, one left swing, and one right swing. The period
is influenced by the pendulum's length and, to a lesser extent, by the amplitude, or swing's width.
Another mechanical mechanism that oscillates is the straightforward pendulum. It consists of a point
mass "m" hung from a fixed support by a light, inextensible string of length L. The gravitational force
is what causes the motion to move in a vertical plane. the gravitational force's tangential component,
mgsin10°, and the restoring force acting tangent to the arc. A pendulum exhibits simple harmonic
motion (SHM), which allowed us to measure the gravitational constant by measuring the period of the
pendulum. The period T, of a pendulum of length L undergoing simple harmonic motion, is given by:
T=2π√L/g
1|Page
Consequently, we could determine the value of g by measuring the pendulum's
length and period: g=4π2L/T2
2|Page
5. Experimental Setup:
Set the pendulum in such a way that the length can be varied as shown below
6. Procedure:
1. A string measuring 1 meter was displaced to make 10° from the starting
point (equilibrium).
2. The bob was released right away while the stopwatch started recording the
time for 10 complete oscillations.
3. The trial was repeated for 3 sessions.
4. The length of the string was decreased from 1 meter and tried with the
same procedures for 4 sessions.
5. The results were recorded with three trials each
7. Data table:
Length of the Time (trial 1) Time (trial 2) Time (trial
Average time trial
string 3) for 10 oscillations
(sec)
1.0 19.75 20.14 19.82 19.90
0.9 19.06 18.86 18.88 18.93
0.8 17.68 17.70 17.91 17.76
0.7 16.75 16.81 16.77 16.77
0.6 15.49 15.58 15.51 15.52
0.5 14.14 14.19 14.15 14.16
Table 1: The table which shows the length of the string and time measures with
constant mass
3|Page
8. Data Analysis:
Length Avg. time taken per Time Acceleration Percentage
(m) 10 oscillations(s) period of one due to uncertainty
oscillation(s) gravity (m/s2) (%)
1 19.90 1.990 9.969 1.621
0.9 18.93 1.893 9.915 1.070
0.8 17.76 1.776 10.01 2.038
0.7 16.77 1.677 9.826 0.163
0.6 15.52 1.552 9.833 0.234
0.5 14.16 1.416 9.844 0.346
Formulas used:
Time Period = (Average time)/10
Acceleration due to gravity= (4π2L)/T2
Uncertainty Percentage= ((Accepted value-calculated value)/ (Accepted
value) (100%)
10.Conclusion:
The main goal of this lab was to ascertain how the basic pendulum's length affected the
acceleration g caused by gravity. Calculating the acceleration due to gravity and
demonstrating the precise impact of process duration required using the average time for 10
oscillations and periods. All things considered, a basic pendulum's time period is influenced
by its length. According to the formula T2 = (4π2 L)/g, T2 is directly proportional to the length of
a simple pendulum. So as the value of length is decreased, the value of time period also
decreases.
4|Page
11.References:
https://www.baylor.edu/physics/doc.php/110769.pdf
https://www.examples.com/business/physics-lab-report.html
https://www.studocu.com/row/document/haramaya-university/
physics/sample-lab-report/17172114
https://www.sampletemplates.com/business-templates/report/
physics-lab-report-samples.html
5|Page