POLYVEST HT en

Product information
POLYVEST HT
HYDROXYL-TERMINATED LIQUID POLYBUTADIENE
GENERAL DESCRIPTION
POLYVEST HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene with a high
content of double bonds having the following composition:
· 1,2-vinyl (x) approx. 22 %
· 1,4-trans (y) approx. 58 %
· 1,4-cis (z) approx. 20 %
SPECIFICATION
Property Value Unit Test Method

Viscosity at 30°C 4,000 – 5,500 mPa s DIN EN ISO 3219
Hydroxyl Number 44 – 51 mg KOH/g DIN EN ISO 4629-2
Evonik Operations | POLYVEST HT en | Page 1/4 | 1/26/2021

TYPICAL DATA
Property Value Unit Test Method

Mean molar mass approx. 2,900 g/mol GPC*
(polybutadiene standard)
Mean OH functionality approx. 2.4 calculated via Mn and
hydroxyl number
3
Density at 20°C 0.90 – 0.92 g/cm DIN ISO 2811-1
Iodine Number 420 – 440 g Iodine/100 g DIN 53 241
Gardner Color ≤1 DIN EN ISO 4630
Flash Point approx. 215 °C DIN EN ISO 2719
Ignition Temperature approx. 375 °C DIN 51 794
Pour Point approx. -18 °C DIN ISO 3016
Glass Transition Temperature (Tg) approx. -80 °C DIN EN ISO 11 357-1
GENERAL USE AND APPLICATIONS
Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and
hydrophobic hydrocarbon resin POLYVEST HT is a highly reactive binder and it provides versatile
opportunities for precise chemical modifications and reactions. POLYVEST HT exhibits the following
features:
· high chemical resistance towards acids and bases

· excellent water resistance
· excellent electrical insulation properties
· high cold resistance by keeping good flexibility at low temperatures
· good solubility in aliphatics, aromatics and ethers
· low moisture and gas permeability
· good adhesion to various substrates
In this form POLYVEST HT is used in various fields of application such as:
· adhesives and sealants

· insulated glass sealants
· waterproofing membranes and coatings
· gap fillers and expansion joints
· electrical insulations and potting compounds
· binder for rubber based sealants and recycled rubber compounds
· polymer modification
We are pleased to send guide formulations.
*GPC: Gel Permeation Chromatography

SUPPLY FORM
Viscous liquid
PACKAGING AND TRANSPORT
· steel drums (content 180 kg); minimum order quantity 4 drums on pallet
· IBC (content 850 kg)
· delivery in road tankers
STORAGE
POLYVEST HT is stable for at least 1 year with exclusion from air, light and moisture at storage
temperatures below 25 °C.
SAFETY AND HANDLING
POLYVEST HT is supplied under a blanket of inert gas (nitrogen). The contact with air oxygen should be
avoided as possible. Opened containers should be blanketed with inert gas again and closed tightly.
We are pleased to send our current Material Safety Data Sheet.
EXPORT REGULATIONS
POLYVEST HT is subject to export control regulations. For exportation of this product, an export licence
by German Export Control Authorities (BAFA) may be mandatory.

Marl, October 12, 2018; This data sheet replaces all former issues.
POLYVEST is a registered trademark of Evonik Industrie AG or one of ist subsidiaries.
Disclaimer
This information and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other legal
responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty,
whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes
according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and
testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out only by qualified
experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply
that similar products could not be used.
EVONIK OPERATIONS GMBH EVONIK CORPORATION EVONIK SPECIALITY CHEMICALS

Coating & Adhesive Resins Coating & Adhesive Resins (SHANGHAI) CO., LTD.
Paul-Baumann-Str. 1 299 Jefferson Road, 55, Chundong Road
45764 Marl Parsipanny, NJ 07054-0677 Xinzhuang Industry Park
Germany USA Shanghai, 201108
P.R. China
For contacts in your country, please visit: www.evonik.com/adhesive-resins-contact
E-mail: adhesives@evonik.com
www.evonik.com/designed-polymers

POLYVEST HT en

Uploaded by

Copyright:

Available Formats

POLYVEST HT en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

POLYVEST HT en

Uploaded by

Copyright:

Available Formats

Product information

HYDROXYL-TERMINATED LIQUID POLYBUTADIENE

· 1,2-vinyl (x) approx. 22 %

· 1,4-trans (y) approx. 58 %

· 1,4-cis (z) approx. 20 %

Property Value Unit Test Method

Evonik Operations | POLYVEST HT en | Page 1/4 | 1/26/2021

Property Value Unit Test Method

GENERAL USE AND APPLICATIONS

· high chemical resistance towards acids and bases

In this form POLYVEST HT is used in various fields of application such as:

· adhesives and sealants

We are pleased to send guide formulations.

*GPC: Gel Permeation Chromatography

Evonik Operations | POLYVEST HT en | Page 2/4 | 1/26/2021

PACKAGING AND TRANSPORT

SAFETY AND HANDLING

We are pleased to send our current Material Safety Data Sheet.

Evonik Operations | POLYVEST HT en | Page 3/4 | 1/26/2021

EVONIK OPERATIONS GMBH EVONIK CORPORATION EVONIK SPECIALITY CHEMICALS

Evonik Operations | POLYVEST HT en | Page 4/4 | 1/26/2021

You might also like