1N4150 FDLL4150

1N4150 / FDLL4150
Discrete POWER & Signal

Technologies
1N4150 / FDLL4150
COLOR BAND MARKING

DEVICE 1ST BAND 2ND BAND
FDLL4150 BLACK ORANGE
LL-34
DO-35 THE PLACEMENT OF THE EXPANSION GAP
HAS NO RELATIONSHIP TO THE LOCATION
OF THE CATHODE TERMINAL
High Conductance Ultra Fast Diode

Sourced from Process 1R. See MMBD1201-1205 for characteristics.
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
Symbol Parameter Value Units

W IV Working Inverse Voltage 50 V
IO Average Rectified Current 200 mA
IF DC Forward Current 400 mA
if Recurrent Peak Forward Current 600 mA
if(surge) Peak Forward Surge Current
Pulse width = 1.0 second 1.0 A
Pulse width = 1.0 microsecond 4.0 A
Tstg Storage Temperature Range -65 to +200 °C
TJ Operating Junction Temperature 175 °C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 200 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Characteristic Max Units

1N / FDLL 4150
PD Total Device Dissipation 500 mW
Derate above 25°C 3.33 mW/°C
RθJA Thermal Resistance, Junction to Ambient 300 °C/W
ã 1997 Fairchild Semiconductor Corporation

1N4150 / FDLL4150
High Conductance Ultra Fast Diode
(continued)
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Max Units

BV Breakdown Voltage IR = 5.0 µA 75 V
IR Reverse Current VR = 50 V 100 nA
VR = 50 V, TA = 150°C 100 µA
VF Forward Voltage IF = 1.0 mA 540 620 mV
IF = 10 mA 660 740 mV
IF = 50 mA 760 860 mV
IF = 100 mA 820 920 mV
IF = 200 mA 0.87 1.0 V
CO Diode Capacitance VR = 0, f = 1.0 MHz 2.5 pF
TRR Reverse Recovery Time IF = IR = 10 mA-200 mA, RL = 100Ω 4.0 nS
IF = IR =200 mA-400 mA,RL = 100Ω 6.0 nS
TFR Forward Recovery Time IF = 200 mA, VFR = 1.0 V 10 nS
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™ ISOPLANAR™
CoolFET™ MICROWIRE™
CROSSVOLT™ POP™
E2CMOSTM PowerTrench™
FACT™ QS™
FACT Quiet Series™ Quiet Series™
FAST® SuperSOT™-3
FASTr™ SuperSOT™-6
GTO™ SuperSOT™-8
HiSeC™ TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.
Preliminary First Production This datasheet contains preliminary data, and

supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete Not In Production This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

1N4150 FDLL4150

Uploaded by

Copyright:

Available Formats

1N4150 FDLL4150

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1N4150 FDLL4150

Uploaded by

Copyright:

Available Formats

1N4150 / FDLL4150

Discrete POWER & Signal

COLOR BAND MARKING

High Conductance Ultra Fast Diode

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

Symbol Parameter Value Units

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Characteristic Max Units

ã 1997 Fairchild Semiconductor Corporation

Electrical Characteristics TA = 25°C unless otherwise noted

Symbol Parameter Test Conditions Min Max Units

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

LIFE SUPPORT POLICY

PRODUCT STATUS DEFINITIONS

Datasheet Identification Product Status Definition

Preliminary First Production This datasheet contains preliminary data, and

Obsolete Not In Production This datasheet contains specifications on a product

You might also like