Created by Ipro UIP JBTB # Page 1/13

Rev. Description Date Designed 08 Checked

Apr 22 Approved

PT. PLN (PERSERO)

UNIT INDUK PEMBANGUNAN JAWA
BAGIAN TIMUR DAN BALI
JL. KETINTANG BARU I NO. 1 - 3, SURABAYA 60231
CONTRACT NO.:
0002.PJ/DAN.01.03/C45000000/2022
Tanggal 11 Maret 2022

CONTRACTOR :
PT. WISMA SARANA TEKNIK

PROJECT TITLE :
PENGADAAN BARANG DAN JASA KONSTRUKSI PEMBANGUNAN REKONFIGURASI
SUTT TX PESANGGARAN/PEMECUTAN KELOD - BANDARA TAHAP I

DOCUMENT / DRAWING TITLE :

DRAWING
SINGLE TENSION STRING FOR ACCC HAMBURG - 150 KV

MANUFACTURER :
PT. SICAMINDO BALARAJA INDONESIA

MANUFACTURER'S DRAWING NO.:

8W101-0587B

Prepared : Design By :
Dated : 30 Maret 2022 Dated : 30 Maret 2022

APPROVED BY CUSTOMER / PT. PLN (PERSERO)

UNIT INDUK PEMBANGUNAN JBTB
 Created by Ipro UIP JBTB # Page 2/13

WIN 15/06/2016
FOR TENDER ONLY

Date
-
1 2 3 1352 3 4 5 6

Par
-
400
210 190
22

for approval M16 08 Apr 22

80 109 12 INSULATORS x 146 = 1752 135 340-484

7
- Revisi menggunakan polymer insulator
- sesuaikan panjang (length)
- Sesuaikan Gap Insulator

- TPG tidak perlu dilampirkan/tidak untuk

approval

a Création du plan.
Rev Modification
ACCC HAMBURG
Conductor 28.62 mm. * Minimum failing load = 95% of UTS of conductor.

b -
UTS 143.2 kN ** supplied separately

Insulator CEI 60120 N 16mm, 120 kN

SINGLE TENSION STRING
Voltage 150 kV Uts 120 kN Weight 16.04 kg.
FOR ACCC HAMBURG - 150 kV
7 1 JUMPER TERMINAL CDAXFKACCCHAMBURG ** GALVA STEEL + ALU ALLOY -
THIS DOCUMENT INCLUDING ALL INTELLECTUAL PROPERTY RIGHTS CONNECTED THEREWITH ARE OUR OWNERSHIP.
6 1 DEAD END CLAMP T2N2FKACCCHAMBURG ** GALVA STEEL + ALU ALLOY * IT IS GIVEN TO YOU ON A CONFIDENTIAL BASIS AND CANNOT BE USED, REPRODUCED, COMMUNICATED AND/OR MODIFIED (etc.)
5 1 ADJUSTABLE LINK RL120340484 GALVANIZED STEEL 120 WITHOUT OUR PRIOR WRITTEN APPROVAL.
4 1 SOCKET CLEVIS BS16CCRAC GALVANIZED STEEL 120 PT SICAMINDO Balaraja INDONESIA Executed by : WIN Date : 15/06/2016

3 2 ARCING HORN CCS4MF2A GALVANIZED STEEL - Manufacturing under license of DERVAUX France Checked by : Date :
2 1 BALL EYE OTC16 GALVANIZED STEEL 120 fully owned by SICAME Group of France Scale :
120
1 1 TWISTED DOUBLE CLEVIS CA120FB GALVANIZED STEEL
8W101-0587B
ALL DIMENSIONS IN MM

Rep Qty Designation Catalogue Reference Matiere UTS

Origine layout : A3
 Created by Ipro UIP JBTB # Page 3/13

8
50

M1 6
08 Apr 22
19

80
2

3
M1 6

20

Toutes les parties ferreuses sont galvanisées à chaud excepté les taraudages et
les pièces en acier inoxydable suivant les normes : NFC66-400, EN ISO 1461, ASTM A-153
Ferrous parts are hot dip galvanized except female threads and stainless steel
components according to standarts : NFC66-400, EN ISO 1461, ASTM A-153.

Charge de rupture minimum CHAPE TWISTED

130 kN
Ultimate strength AJOUREE DOUBLE CLEVIS
Masse
CA120FB
0.990 kg THIS DOCUMENT INCLUDING ALL INTELLECTUAL PROPERTY RIGHTS CONNECTED THEREWITH ARE OUR OWNERSHIP.
Weight IT IS GIVEN TO YOU ON A CONFIDENTIAL BASIS AND CANNOT BE USED, REPRODUCED, COMMUNICATED AND/OR MODIFIED (etc.)
WITHOUT OUR PRIOR WRITTEN APPROVAL.
4 2 GOUPILLE SPLIT PIN HUMPBACK ACIER INOXYDABLE STAINLESS STEEL PT SICAMINDO Balaraja INDONESIA Executed by : FV Date : 16/06/2009

3 1 BOULON BOLT ACIER GALVANISE GALVANIZED STEEL Manufacturing under license of DERVAUX France Modified by : Date :
2 1 BOULON BOLT ACIER GALVANISE GALVANIZED STEEL fully owned by SICAME Group of France Scale :
1 1 CORPS BODY ACIER GALVANISE GALVANIZED STEEL ALL DIMENSIONS IN MM

Rep. Qty Désignation Description Matière Material

Origine layout : A3 CA120FB
 Created by Ipro UIP JBTB # Page 4/13

+1.8
16+1.3
+0.4
50 -0.9

Zones exemptées de bavures

Exempted area of burs

25+0.1
-0.9
R 25
Ch 1±0.5x45° RAYONS NON COTES
R1.5

ø20+0.4
-0.2
RADIUS WITHOUT DIMENSIONS
08 Apr 22 DEPOUILLE GENERALE EXTERIEURE 6°, INTERIEUR 8°

(Pour/For information)

(Pour/For information)
GENERAL DRAFT ANGLE OUTSIDE 6°, INSIDE 8°
30

MARQUAGE

42.5
OTC 16

46
MARKING
+ MARQUAGE SUIVANT SPECIFICATION TECHNIQUE
BET0002
ZONE DE MARQUAGE + MARKING ACCORDING TO TECHNICAL SPECIFICATION

4
R
MARKING AREA DEPORT DE JOINT
0.5 maxi
JOINT OFFSET

109+0.7
-0.5
BAVURE DE JOINT
0.6 maxi
JOINT FLASH

-0.5
32+1
28+0.3
-1.4 LA PARTIE CERCLEE NE DEVRA COMPORTER AUCUNE BAVURE AU JOINT NI AUCUN
MEULAGE EXCESSIF RISQUANT DE LAISSER UN PLAT LE LONG DU JOINT
THE RINGED PART WILL HAVE TO COMPRISE ANY BUR WITH THE JOINT AND NO
EXCESSIVE GRINDING BEING LIKELY TO LEAVE A DISH ALONG THE JOINT

2 ø16.3 BOUTON SUIVANT NORME CEI (60120:16 mm et ANSI C29-2 CLASSE 52-3 APRES GALVA)

3+1.3
0.5

-0.4
R
BALL ACCORDING TO CEI NORM (60120:16 mm et ANSI C29-2 CLASS 52-3 AFTER GALVA)
3

-0.5
R

33.5+1
R2 TOLERANCES GENERALE SUIVANT NORME (Sauf indications)
NF E 82 002 (Coef. M1 S3)
GENERALE TOLERANCES ACCORDING TO NORM (Except indications)
13+0.2
-0.9

TOLERANCES APRES GALVANISATION

5.5

TOLERANCES AFTER GALVANIZATION

R3 Tangent
R 50

GALVANISATION SUIVANT SPECIFICATION TECHNIQUE

RE000003
32.5 +0.6 GALVANIZATION ACCORDING TO TECHNICAL SPECIFICATION
-0.7

CHARGE DE RUPTURE MINIMUM

COUPE A-A MINIMUM UTS
120 kN

CUT A-A MASSE

0.480 kg
2 8 + 0 .3 WEIGHT
- 1. 4
R2.5
OEILLET BALL TONGUE
CORPS BODY
+2 .1 Plan Client OTC 16
22

-0
22
+2 .1
-0

Customer's drawing THIS DOCUMENT INCLUDING ALL INTELLECTUAL PROPERTY RIGHTS CONNECTED THEREWITH ARE OUR OWNERSHIP.
IT IS GIVEN TO YOU ON A CONFIDENTIAL BASIS AND CANNOT BE USED, REPRODUCED, COMMUNICATED AND/OR MODIFIED (etc.)
E 61 03 04 00 WITHOUT OUR PRIOR WRITTEN APPROVAL.
MATERIAL : C35 or C40 (EN 10083-1)
h Update technical specification + marking + material CRF 11/06/2007
TREATMENT : TRAITEMENT : TREMPE + REVENU 650 R 800 N/mm²
TREATMENT : HARDENING + TEMPERED 650 R 800 N/mm²
g Modification plan en sourcing + cotation après galva DN 10/12/2004
ORIGINE SCALE : CHECKED BY :
f . 61 25 01 01 --> 9 61 03 04 00 JPC 18/03/1999
LAYOUT
e M a J changement fournisseur FAV JPC 16/03/1999 ALL DIMENSIONS IN MM

Rev Modification Par Date A3 F/ 61 03 04 00 /h P961030400

 Created by Ipro UIP JBTB # Page 5/13

WIN 13/09/2012
Date
-
400

Par
24

-
250
08 Apr 22

2 1

16
3

a Création du plan.
Rev Modification
b -
Toutes les parties ferreuses sont galvanisées à chaud excepté les taraudages et
les pièces en acier inoxydable suivant les normes : NFC66-400, EN ISO 1461, ASTM A-153
Ferrous parts are hot dip galvanized except female threads and stainless steel CORNE ARCING
components according to standarts : NFC66-400, EN ISO 1461, ASTM A-153.
DE GARDE HORN
Masse
CCS4MF2A
1.200 kg THIS DOCUMENT INCLUDING ALL INTELLECTUAL PROPERTY RIGHTS CONNECTED THEREWITH ARE OUR OWNERSHIP.
Weight
IT IS GIVEN TO YOU ON A CONFIDENTIAL BASIS AND CANNOT BE USED, REPRODUCED, COMMUNICATED AND/OR MODIFIED (etc.)
WITHOUT OUR PRIOR WRITTEN APPROVAL.
EXECUTED BY : WIN DATE : 28/05/2013
4 1 CONTREPLAQUE WALL PLATE ACIER GALVANISE GALVANIZED STEEL
3 2 RONDELLE FREIN SPRING WASHER ACIER INOXYDABLE STAINLESS STEEL MODIFY BY : DATE :
2 2 BOULON BOLT ACIER GALVANISE GALVANIZED STEEL ORIGINE SCALE : CHECKED BY :
LAYOUT
1 1 CORPS BODY ACIER GALVANISE GALVANIZED STEEL Allee Ampere Z.I. Le Bec - 42501 LE CHAMBON FEUGEROLLES ALL DIMENSIONS IN MM

Rep. Qty Désignation Description Matière Material CCS4MF2A a

Created by Ipro UIP JBTB # Page 6/13

08 Apr 22
Created by Ipro UIP JBTB # Page 7/13

08 Apr 22
 Created by Ipro UIP JBTB # Page 8/13

Rev. Description Date Designed 08 Checked

Apr 22 Approved

PT. PLN (PERSERO)

UNIT INDUK PEMBANGUNAN JAWA
BAGIAN TIMUR DAN BALI
JL. KETINTANG BARU I NO. 1 - 3, SURABAYA 60231
CONTRACT NO.:
0002.PJ/DAN.01.03/C45000000/2022
Tanggal 11 Maret 2022

CONTRACTOR :
PT. WISMA SARANA TEKNIK

PROJECT TITLE :
PENGADAAN BARANG DAN JASA KONSTRUKSI PEMBANGUNAN REKONFIGURASI
SUTT TX PESANGGARAN/PEMECUTAN KELOD - BANDARA TAHAP I

DOCUMENT / DRAWING TITLE :

TECHNICAL PARTICULAR & GUARANTEE
SINGLE TENSION STRING FOR ACCC HAMBURG - 150 KV

MANUFACTURER :
PT. SICAMINDO BALARAJA INDONESIA

MANUFACTURER'S DRAWING NO.:

Prepared : Design By :
Dated : 30 Maret 2022 Dated : 30 Maret 2022

APPROVED BY CUSTOMER / PT. PLN (PERSERO)

UNIT INDUK PEMBANGUNAN JBTB
 Created by Ipro UIP JBTB # Page 9/13

TECHNICAL PARTICULAR AND GUARANTEE

TPG IV.4.5 OPTICAL GROUNDWIRES (OPGW AND ACCESSORIES)

NO. DESCRIPTION UNIT REQUIRED PROPOSED AND GUARANTEE

4. Suspension clamps

4.1 Manufacturer's name to be mentioned Sicamindo

4.2 Applied conductor Comply with earlhwire type Comply with earlhwire type
4.3 Materials [body) Galvanized Steel Galvanized Steel
4.4 Type to be mentioned Preformed
4.5 Slip strength kN to be mentioned 15
4.6 Ultimate breaking strength kN to be mentioned 90
08 Apr 22
5. Armour Rod

5.1 Manufacturer's name to be mentioned Sicamindo

5.2 Materials to be mentioned Alumunium Alloy
5.3 Applied conductor Comply with conductor type Comply with conductor type
5.4 Length m to be mentioned 1995
5.5 Weight kg to be mentioned 0.86
5.6 Type Prelormed Prelormed

6. Tension clamps

6.1 Manufacturer's name to be mentioned Sicamindo

6.2 Applied conductor Comply with earthwire type Comply with earthwire type
6.3 Materials (body) Galvanized Steel Galvanized Steel
6.4 Type to be mentioned Preformed
6.5 Slip strength kN to be mentioned 95% of UTS OPGW
6.6 Ultimate breaking strength kN to be mentioned 95% of UTS OPGW

7. Parallel Groove

7.1 Manufacturer's name to be mentioned Sicamindo

7.2 Materials to be mentioned Aluminium Alloy
7.3 Applied conductor Comply with conductor type Comply with conductor type
7.4 Length m to be mentioned 55
7.5 Weight kg to be mentioned 0.2
7.6 Type Bolted Bolted
7.7 Slip Strength to be mentioned 15 kN

BIDDER'S SIGNATURE MANUFACTURER SIGNATURE

(.........................................) (..................................................) 3 of 3
 Created by Ipro UIP JBTB # Page 10/13

TECHNICAL PARTICULAR AND GUARANTEE

TPG IV.4.4 - ALUMUNIUM-CLAD STEEL WIRES

NO. DESCRIPTION UNIT REQUIRED PROPOSED AND GUARANTEE

C. Suspension clamps

1 Manufacturer's name to be mentioned Sicamindo

2 Applied conductor Comply with earthwire type Comply with earthwire type
3 Materials (body) Galvanized Steel Galvanized Steel
4 Type to be mentioned Bolted
5 Slip strength kN to be mentioned 15
6 Ultimate breaking strength kN to be mentioned 70
08 Apr 22
D. Armour Rod

1 Manufacturer's name to be mentioned Sicamindo

2 Materials to be mentioned Aluminium alloy
3 Applied conductor Comply with conductor type Comply with conductor type
4 Length m to be mentioned 0.636
5 Weight kg to be mentioned 0.17
6 Type Preformed Preformed

E. Tension clamps

1 Manufacturer's name to be mentioned Sicamindo

2 Applied conductor Comply with earthwire type Comply with earthwire type
3 Materials (body) Galvanized Steel Galvanized Steel
4 Type to be mentioned Compression
5 Slip strength kN to be mentioned 95% of UTS Earthwire
6 Ultimate breaking strength kN to be mentioned 95% of UTS Earthwire

F. Parallel Groove

1 Manufacturer's name to be mentioned Sicamindo

2 Materials to be mentioned Aluminium alloy
3 Applied conductor Comply with conductor type Comply with conductor type
4 Length m to be mentioned 0.055
5 Weight
Continuous kg to be mentioned 0.2
6 TypeFor one sec Bolted Bolted
7 Slip Strength to be mentioned 15

BIDDER'S SIGNATURE MANUFACTURER SIGNATURE

(.........................................) (..................................................) 1 of 1
 Created by Ipro UIP JBTB # Page 11/13

TECHNICAL PARTICULAR AND GUARANTEE

TPG IV.4.7 - INSULATORS AND FITTINGS INSULATOR UNIT

NO. DESCRIPTION UNIT REQUIREMENT PROPOSED AND GUARANTEE

Single Tension Double Tension Single Double Single Tension Double Single Double
set set Suspention set Suspention set set Tension set Suspention set Suspention set
II Insulator sets for 1 x HCLS ≥ 1858 A & 1 x TACSR 240

1 Number of strings Insulator (1 string):

- For Heavy Pollution unit 1 x 120 2 x 120 1 x 120 2 x 120 1 x 120 2 x 120 1 x 120 2 x 120
2 Length of string when streched mm to be mentioned to be mentioned to be mentioned to be mentioned 2551 2871 2195 4294
3 Net weight of one set kg to be mentioned to08
be Apr
mentioned
22 to be mentioned to be mentioned 85.1 158.9 74.82 164.66
4 Specified Mechanical Load(SML) kN 1 x 120 2 x 120 1 x 120 2 x 120 1 x 120 2 x 120 1 x 120 2 x 120
5 Withstand voltage without arching horn
- Wet power-frequency withstand voltage test kV to be mentioned to be mentioned to be mentioned to be mentioned 390 390 390 390
- Dry lightning Impulse withstand voltage test (1.2 x 50 us) kV to be mentioned to be mentioned to be mentioned to be mentioned 1000 1000 1000 1000
6 Withstand voltage with arching horn
- Wet power-frequency withstand voltage test kV to be mentioned to be mentioned to be mentioned to be mentioned ˂ 390 ˂ 390 ˂ 390 ˂ 390
- Dry lightning Impulse withstand voltage test (1.2 x 50 us) kV to be mentioned to be mentioned to be mentioned to be mentioned ˂ 1000 ˂ 1000 ˂ 1000 ˂ 1000
7 Arching horn gap (appraoximately) :
- For Heavy Pollution mm ≥ 1400 ≥ 1400 ≥ 1400 ≥ 1400 ≥ 1400 ≥ 1400 ≥ 1400 ≥ 1400

III Insulator sets for 1 x HCLS ≥ 1858 A & 1 x TACSR 240

For Heavy Pollution (120) For Heavy Pollution (120)
1 Number of string insulator (for Jumper) 1 x 120 1 x 120
2 Length of string when streched mm to be mentioned 2200
3 Wet weight of one set kg to be mentioned 69
4 SpecifIed Mechanical Load (SML) kN 1 x 120 1 x 120
5 Withstand voltage without arching horn :
- Wet power-frequency withstand voltage test kV to be mentioned 390
- Dry lightning Impulse withstand voltage test (1.2 x 50 us) kV to be mentioned 1000

BIDDER'S SIGNATURE MANUFACTURER SIGNATURE

(.........................................) (..................................................) 1 of 1
 Created by Ipro UIP JBTB # Page 12/13

TECHNICAL PARTICULAR AND GUARANTEE

TPG IV.4.7 - INSULATORS AND FITTINGS INSULATOR UNIT

NO. DESCRIPTION UNIT REQUIREMENT PROPOSED AND GUARANTEE

IV Fitting
1 Suspension Clamps
1.1 - Manufacturer's name to be mentioned Sicamindo
1.2 - Materials (Body) Aluminium Alloy + Galvanized steel Aluminium Alloy + Galvanized steel
1.3 - Type to be mentioned Bolted
1.4 - Applied conductor Comply with conductor type + armour rod Comply with conductor type + armour rod
1.5 - Ultimate breaking strength kN to be mentioned 90
1.6 - Slip strength kN to be mentioned 15
08 Apr 22
2 Armour Rod
2.1 - Manufacturer's name to be mentioned Sicamindo
2.2 - Materials Aluminium Alloy Aluminium Alloy
2.3 - Applied conductor Comply with conductor type Comply with conductor type
2.4 - Type of end from Ball Ball
2.5 - Diameter mm to be mentioned 7.87
2.6 - Length mm to be mentioned 2134
2.7 - Slip strength to be mentioned 75% of UTS Conductor
2.8 - Minimum tensile strength to be mentioned 75% of UTS Conductor
2.9 - Direction of lay Comply with conductor type Comply with conductor type
2.10 - Weight kg to be mentioned 3.74
2.11 - Type Preformed Preformed

3 Tension Clamps Compression Type

3.1 - Manufacture's name to be mentioned Sicamindo
3.2 - Material :
* Dead end body and jumper connector Aluminium Alloy + Galvanized steel
* Steel core with clevis Galvanized steel Galvanized steel
* Bolt Galvanized steel Galvanized steel
3.3 - Minimum tensile strength :
* Dead end clamp kN to be mentioned 95% of UTS Conductor
* Jumper connector kN to be mentioned 25% of UTS Conductor
- Slip strength kN to be mentioned 95% of UTS Conductor
- Ultimatebreaking strength kN to be mentioned 95% of UTS Conductor

BIDDER'S SIGNATURE MANUFACTURER SIGNATURE

(.........................................) (..................................................) 2 of 2
 Created by Ipro UIP JBTB # Page 13/13

TECHNICAL PARTICULAR AND GUARANTEE

TPG IV.4.7 - INSULATORS AND FITTINGS INSULATOR UNIT

NO. DESCRIPTION UNIT REQUIREMENT PROPOSED AND GUARANTEE

4 Parallel Groove
4.1 - Manufactur's name to be mentioned Sicamindo
4.2 - Material to be mentioned Aluminium Alloy
4.3 - Applied conductor Comply with conductor type Comply with conductor type
4.4 - Length m to be mentioned 55
4.5 - Weight kg to be mentioned 0.2
4.6 - Type Bolted Bolted
4.7 - Slip Strength to be mentioned 15 kN
08 Apr 22
5 Arching Horn
5.1 - Manufactur's name to be mentioned Sicamindo
5.2 - Material Galvanized steel Galvanized steel
5.3 - Insulation to be mentioned Air
5.4 - Number of Insulation Comply with string polymer insulator Comply with conductor type
5.5 - Bolt Galvanized steel Galvanized steel

6 Vibration Damper
6.1 - Manufactur's name to be mentioned Sicamindo
6.2 - Type to be mentioned Stockbridge STUN
6.3 - Material Galvanized steel Galvanized steel
6.4 - Minimum operating temperatur ºC 200 200
6.5 - Weight kg to be mentioned 3.56

V Join Sleeves (Midspan Joint)

1 - Manufactur's name to be mentioned Sicamindo
2 - Type to be mentioned Compression
3 - Material Galvanized steel Galvanized steel
4 - Minimum operating temperatur ºC 200 200
Min Tensile strenght after compressed (95% conductor
5 - kN to be mentioned 95% of UTS Conductor
tensile strenght)

VI Repair Sleeves (Midspan Joint)

1 - Manufactur's name to be mentioned Sicamindo
2 - Type to be mentioned Compression
3 - Material Galvanized steel Galvanized steel
4 - Minimum operating temperatur ºC 200 200

BIDDER'S SIGNATURE MANUFACTURER SIGNATURE

(.........................................) (..................................................) 3 of 3