Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 135 views

    QAQC Requirement-Tile Works - 副本 12345

    Uploaded by

    Mile Stone
    This document provides instructions for fixing wall and floor tiles on Gewan Island. It outlines the surface preparation process and required materials. Quality control measures include ensuring proper tile elevation, drainage locations, opening sizes, and avoiding damaged edges or misaligned joints. Tiles must be installed according to specifications and subject to rejection by the client if issues arise.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    QAQC Requirement-Tile Works - 副本 12345

    Uploaded by

    Mile Stone
    135 views4 pages
    This document provides instructions for fixing wall and floor tiles on Gewan Island. It outlines the surface preparation process and required materials. Quality control measures include ensuring proper tile elevation, drainage locations, opening sizes, and avoiding damaged edges or misaligned joints. Tiles must be installed according to specifications and subject to rejection by the client if issues arise.

    Original Title

    QAQC Requirement-Tile Works - 副本 12345 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for fixing wall and floor tiles on Gewan Island. It outlines the surface preparation process and required materials. Quality control measures include ensuring proper tile elevation, drainage locations, opening sizes, and avoiding damaged edges or misaligned joints. Tiles must be installed according to specifications and subject to rejection by the client if issues arise.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    135 views4 pages

    QAQC Requirement-Tile Works - 副本 12345

    Uploaded by

    Mile Stone
    This document provides instructions for fixing wall and floor tiles on Gewan Island. It outlines the surface preparation process and required materials. Quality control measures include ensuring proper tile elevation, drainage locations, opening sizes, and avoiding damaged edges or misaligned joints. Tiles must be installed according to specifications and subject to rejection by the client if issues arise.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    GEWAN ISLAND BUILDING PACKAGE 03

    PROCEDURE OF WALL&FLOOR TILES FIXING WORKS

    PART 1 APPLICATION OF MAIN MATERIALS

    /Final plaster/ wet water


    proofing application /Final
    SURFACE screed /Surface preparation Ask CRCC site Eng for IR
    1
    PREPRATION INR must be approved, before work starts
    Area must be cleaned

    mixed with CEMPATCH


    OPC CEMMENT SBR 100(1 SBR:2 OPC
    2
    50KG/BAG cemment)--FOR FLOOR
    TILES

    3CM mortar should be put


    CEMFIX-TBG on the sand screed--FOR
    3
    25KG/BAG/(CIKO BS40) FLOOR TILES. Mixing 1bag
    with 2L-2.5L water

    FOR WALL TILES,1 bag


    CEMFIX-GP
    mixed with 6.75L-7.25L
    25KG/BAG
    water

    CIKO TILE 2K
    (CIKOtile 2K is available as 30
    FOR WALL TILES-1bag part
    kg kits consisting
    A&1 pcs part B mixed
    of in Part-A 25kg powder and
    Part-B 5.0 litre)

    mixing 1 part Cempatch


    SBR100:2 parts OPC
    cement by weight.Pour the
    properly mixed slurry over
    5 CEMPATCH SBR 100 the leveled bedding screed
    whist wet at a thickness of
    2 to 3mm and immediately
    install the tile.--FOR
    FLOOR TILES

    Grout for ceramic tiles


    CIKO TILE Grout 2k (12kg
    6 .there have different color
    part A&2kg part B)
    for tiles
    PART 2 QUALITY CONTROL

    Tiles elevation。
    Mortar layers and tile
    8 backs need to cover
    （SBR+OPC cemment） to
    avoid sound

    The floor drain must be


    located in the corner of the
    FLOOR DRAIN LOCATION two tiles. Determine
    9
    CONTROL whether the floor drain is
    located properly before
    pasting the floor tile

    The floor drain model is


    used before the wall tiles
    starts, and the position of
    FLOOR DRAIN LOCATION
    10 the floor drain from the
    CONTROL
    wall is adjusted by the
    thickness of the wall motar
    （ciko tile 2k）

    After the floor drain


    locationis confirmed, put
    11 FLOOR DRAIN LOCATION
    one wall tile to fix the
    CONTROL
    location, and other wall
    tiles follow the first tile。

    Tile opening size must be


    the same as floor drain size
    to avoid secondary cutting
    damage to the finished
    product

    12
    The tile plane should be
    lower than the flush tank
    cover plane, otherwise the
    13 button cannot be
    installed.Notify CRCC ENG
    immediately if this
    happens

    Only need half pcs above


    the celling level,some
    14 ceramic tile edge Angle
    damage is used above
    celling

    Tile pipe openings require


    15 a professional opening
    bit,it will rejected if it is
    ugly

    16 wall and tiles backside


    must fill with materials

    Tile edges and corners


    17 should not be damaged。
    Tile gaps need to be。
    Aligned

    Shower mixer-156mm
    18
    need follow actual cutting

    To ensure proper mixing ，


    mechanically powered
    19 mixer or drill fitted with
    suitable paddle should be
    used

    The joint is not matching


    proprely, the level is not
    20
    same, this situation will be
    reject by KEO
    different color have
    21
    different color grout

    if tiles up and down like


    22 this ，it will be reject after
    grou

    You might also like