HCDZX 10 D

http://www.xiaoyu163.
com
HCD-ZX10D
QQ 376315150 892498299
SERVICE MANUAL E Model
Australian Model
Ver 1.0 2004.07
TEL
TEL
HCD-ZX10D is the amplifier, disc player, tape
13942296513
13942296513
deck and tuner section in LBT-ZX10D.
This system incorporates Dolby* Digital, Dolby Pro

Model Name Using Similar Mechanism NEW
Logic (II) adaptive matrix surround decoder, and the DVD
DTS** Digital Surround System. DVD Mechanism Type CDM79B-DVBU64
* Manufactured under license from Dolby Section
Optical Traverse Unit Name DBU-3
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are Tape deck Model Name Using Similar Mechanism HCD-GN100D
trademarks of Dolby Laboratories.
Section Tape Transport Mechanism Type CWM43RR35
** Manufactured under license from Digital Theater
QQ
QQ
QQ 376315150 892498299
Systems, Inc.
TEL 13942296513
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems. Inc.
376315150 892498299
376315150 892498299
SPECIFICATIONS
Amplifier section GAME INPUT VIDEO (phono jack): SUBWOOFER OUT (phono jack):
The following measured at AC 120, 220, 240 V, 1 Vp-p, 75 ohms voltage 250 mV,
50/60 Hz VIDEO/SAT IN L/R (phono jacks): impedance 1 kOhm
DIN power output (rated) sensitivity 250 mV/ SPEAKERS:
Front speakers: 140 + 140 watts 450 mV, impedance FRONT L/R, SURROUND L/R:
(6 ohms at 1 kHz, DIN) 47 kOhms Use only the supplied
Center speaker: 55 watts Outputs speaker SS-ZX10D
(24 ohms at 1 kHz, DIN) PHONES (stereo phone jack): CENTER: Use only the supplied
Surround speakers: 140 + 140 watts accepts headphones of speaker SS-CT381
(6 ohms at 1 kHz, DIN) 8 ohms or more Disc player section
Continuous RMS power ouput (reference) VIDEO/SAT OUT L/R (phono jacks): System Compact disc and digital
Front speakers: 180 + 180 watts voltage 250 mV, audio and video system
(6 ohms at 1 kHz, 10% impedance 1 kOhm Laser Semiconductor laser
THD) VIDEO OUT (phono jack): (DVD: λ=650 nm,
Center speaker: 70 watts max. output level 1 Vp-p, CD: λ=780 nm)
(24 ohms at 1 kHz, 10% load impedance 75 ohms Emission duration:
THD) COMPONENT VIDEO OUT: continuous
Surround speakers: 180 + 180 watts Y: 1 Vp-p, 75 ohms Frequency response DVD (PCM 48 kHz):
(6 ohms at 1 kHz, 10% PB/CB: 0.7 Vp-p, 75 ohms 2 Hz – 22 kHz (±1 dB)
THD) PR/CR: 0.7 Vp-p, 75 ohms CD: 2 Hz – 20 kHz
S VIDEO OUT (4-pin/mini-DIN jack): (±0.5 dB)
Inputs Y: 1 Vp-p, unbalanced, Video color system format
PHONO IN (phono jacks): Sync negative NTSC, PAL
sensitivity 3 mV, C: 0.286 Vp-p load
impedance 47 kOhms impedance 75 ohms – Continued on next page –
MIC (phone jack): sensitivity 1 mV,
impedance 10 kOhms
GAME INPUT AUDIO L/R (phono jacks):
www x aoy u163. com

sensitivity 250 mV,
impedance 47 kOhms
DVD DECK RECEIVER
9-879-053-01
.Sony Corporation
i
2004G0579-1 Home Audio Company
© 2004.07 Published by Sony Engineering Corporation
http://www.xiaoyu163.com
HCD-ZX10D
QQ 376315150 892498299
Tape deck section
Recording system
Frequency response
Tuner section
4-track 2-channel, stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I tapes
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
FM stereo, FM/AM superheterodyne tuner Flexible Circuit Board Repairing

FM tuner section • Keep the temperature of the soldering iron around 270 ˚C
Tuning range 87.5 – 108.0 MHz during repairing.
(50 kHz step) • Do not touch the soldering iron on the same conductor of the
Antenna FM lead antenna circuit board (within 3 times).
Antenna terminals 75 ohms unbalanced
• Be careful not to apply force on the conductor when soldering
Intermediate frequency 10.7 MHz
or unsoldering.
AM tuner section
Tuning range 531 – 1, 602 kHz
(with the tuning interval CAUTION
set at 9 kHz)
530 – 1, 710 kHz
Use of controls or adjustments or performance of procedures
(with the tuning interval other than those specified herein may result in hazardous radiation
exposure.
TEL
TEL
set at 10 kHz)
Antenna AM loop antenna
Antenna terminals External antenna terminal
Intermediate frequency 450 kHz This appliance is
classified as a CLASS 1
13942296513
13942296513
General LASER product. This
Power requirements label is located on the
Australian model: 230 – 240 V AC, rear exterior.
50/60 Hz
Other models: 120 V, 220 V or The following caution label is located inside the
230 – 240 V AC, 50/60 Hz apparatus.
Adjustable with voltage
selector
Power consumption 370 watts

Dimensions (w/h/d) (Unit)
QQ
QQ
Approx. 362 × 437 ×
TEL 13942296513 QQ 376315150 892498299

465 mm
376315150 892498299
376315150 892498299
Mass (Unit) Approx. 20.0 kg
Design and specifications are subject to change

without notice.
www xiaoy u163. com

SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
.
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
HCD-ZX10D
QQ 376315150 892498299
Playable discs
You can playback the following discs on this
system. Other discs cannot be played back.
•
•
•
•
DVD Audio discs.
DVDs with a different region code.
Progressive JPEG format files.
Disc with non-standard shapes (e.g., heart,
square, star).
Cautions when playing a disc
that is recorded in Multi
Session
• This system can playback Multi Session discs
• Discs with adhesive, cellophane tape or
sticker still left on them. when an MP3 audio track is contained in the
List of playable discs first session. Any subsequent MP3 audio
1) ISO 9660 Format
Format of discs Disc logo
tracks recorded in later sessions can also be
The most common international standard for the
logical format of files and folders on a CD-ROM. played back.
DVD VIDEOs
There are several specification levels. In Level 1, file • This system can playback Multi Session discs
names must be in the 8.3 format (no more than eight when a JPEG image file is contained in the
characters in the name, no more than three characters first session. Any subsequent JPEG image
in the extension and in capital letters). Folder names files recorded in later sessions can also be
VIDEO CDs can be no longer than eight characters. There can be played back.
no more than eight nested folder levels. Level 2
• If audio tracks and images in audio CD format
specifications allow file names and folder names up
to 31 characters long. Each folder can have up to
or VIDEO CD format are recorded in the first
eight nested folder levels. session, only the first session will be played
Audio CDs 2) back.
TEL
TEL
CD-Extra
This format records audio (audio CD data) on the • When you playback Multi Session discs with
tracks in session 1 and data on the tracks in session 2. different formats in each session, the format
3)
Mixed CD of the first session is recognized as the disc
13942296513
13942296513
CD-R/CD-RW This format records data on the first track and audio type. Tracks in the second and subsequent
(Audio CDs/Discs (audio CD data) on the second and subsequent tracks sessions are played back if they are the same
with MP3 audio of a session. formats as the first session except for audio
tracks/Discs with CD and VIDEO CD format.
JPEG image files) • CD-Rs and CD-RWs recorded in Multi
Notes about CD-R/CD-RW/
Session that have not ended by “closing the
DVD-R/DVD-RW (Video mode)/
session” are not supported.
The “DVD VIDEO” logo is a trademark. DVD+R/DVD+RW
• In some cases, CD-Rs, CD-RWs, DVD-Rs, Copyrights
Region code of DVDs you can DVD-RWs (Video mode) (DVD-RWs
playback on this system created in video mode have the same format This product incorporates copyright protection
QQ
QQ
technology that is protected by U.S. patents and
QQ 376315150 892498299
as DVD VIDEO), DVD+Rs or DVD+RWs
TEL 13942296513
Your system has a region code printed on the cannot be played back on this system other intellectual property rights. Use of this
back of the unit and will only playback DVDs depending upon the recording quality or copyright protection technology must be
376315150 892498299
376315150 892498299
labeled with identical region code. physical condition of the disc, or the authorized by Macrovision, and is intended for
DVDs labeled will also be played back on
ALL
characteristics of the recording device. home and other limited viewing uses only unless
this system. Furthermore, the disc will not playback if it otherwise authorized by Macrovision. Reverse
If you try to playback any other DVD, the has not been correctly finalized. For more engineering or disassembly is prohibited.
message “Playback prohibited by area information, see the operation instructions for
limitations.” will appear on the TV screen. the recording device.
Depending on the DVD, no region code • A disc recorded in packet write format cannot
indication may be labeled even though playing be played back.
the DVD is prohibited by area restrictions.
Note on playback operations

of DVDs and VIDEO CDs
x
Some playback operations of DVDs and VIDEO
Region code CDs may be intentionally set by software
producers. Since this system playback DVDs
and VIDEO CDs according to the disc contents
Discs that this system cannot the software producers designed, some playback
features may not be available. Also, refer to the
playback
instructions supplied with the DVDs or VIDEO
• CD-ROMs other than those with extension CDs.
“.MP3”, “.JPG” or “.JPEG”.
• CD-Rs/CD-RWs other than those recorded in Music discs encoded with
the following formats:
copyright protection
– Audio CD format.
technologies
– VIDEO CD format.
– MP3 (MPEG 1 Audio Layer 3)/JPEG This product is designed to playback discs that
format that conforms to ISO 96601) Level conform to the Compact Disc (CD) standard.
1/Level 2 or Joliet. Recently, various music discs encoded with
www xiaoy u163. com

• Data part of CD-Extras2). copyright protection technologies are marketed
• Data part of Mixed CDs3). by some record companies. Please be aware that
• Super Audio CDs. among those discs, there are some that do not
• DVD-RWs in VR (Video Recording) mode. conform to the CD standard and may not be
.
• DVD-ROMs. playable by this product.
• DVD-RAMs.
3
HCD-ZX10D
QQ 376315150 892498299
1. SERVICING NOTES ............................................ 5
TABLE OF CONTENTS
7-23. PRINTED WIRING BOARD

– MAIN BOARD – .......................................................... 51
7-24. SCHEMATIC DIAGRAM
2. GENERAL .............................................................. 7
– MAIN BOARD (1/5) – .................................................. 52
3. DISASSEMBLY 7-25. SCHEMATIC DIAGRAM
3-1. FLOW CHART .................................................................. 9 – MAIN BOARD (2/5) – .................................................. 53
3-2. COVER (TOP) ................................................................. 10 7-26. SCHEMATIC DIAGRAM
3-3. CASE ................................................................................ 10 – MAIN BOARD (3/5) – .................................................. 54
3-4. LOADING PANEL .......................................................... 11 7-27. SCHEMATIC DIAGRAM
3-5. FRONT PANEL SECTION ............................................ 11 – MAIN BOARD (4/5) – .................................................. 55
3-6. BACK PANEL SECTION .............................................. 12 7-28. SCHEMATIC DIAGRAM
3-7. MAIN BOARD ............................................................... 12 – MAIN BOARD (5/5) – .................................................. 56
3-8. BRACKET (TR) BLOCK ................................................ 13 7-29. PRINTED WIRING BOARDS
3-9. DVD MECHANISM DECK ............................................ 13 – FRONT AMP SECTION – ............................................ 57
3-10. OPTICAL TRAVERSE UNIT ......................................... 14 7-30. SCHEMATIC DIAGRAM
TEL
TEL
3-11. RF BOARD ...................................................................... 14 – FRONT AMP SECTION (1/2) – ................................... 58
3-12. TAPE MECHANISM DECK ........................................... 15 7-31. SCHEMATIC DIAGRAM
– FRONT AMP SECTION (2/2) – ................................... 59
13942296513
13942296513
4. TEST MODE ............................................................... 16 7-32. PRINTED WIRING BOARD
– SURROUND BOARD – ............................................... 60
5. MECHANICAL ADJUSTMENTS ........................ 27
– SURROUND BOARD – ............................................... 61
7-34. PRINTED WIRING BOARDS
6. ELECTRICAL ADJUSTMENTS .......................... 27 – PANEL SECTION (1/5) – ............................................. 62
7. DIAGRAMS – PANEL SECTION (1/5) – ............................................. 63
7-1. BLOCK DIAGRAM – RF SERVO SECTION – ........... 29 7-36. PRINTED WIRING BOARD
7-2. BLOCK DIAGRAM – PANEL SECTION (2/5) – ............................................. 64
QQ
QQ
– VIDEO/CHANGER SECTION – ................................. 30 7-37. SCHEMATIC DIAGRAM
TEL 13942296513 QQ 376315150 892498299

– TUNER/TAPE SECTION – .......................................... 31 7-38. PRINTED WIRING BOARDS
376315150 892498299
376315150 892498299
7-4. BLOCK DIAGRAM – AUDIO SECTION – ................. 32 – PANEL SECTION (3/5) – ............................................. 66
7-5. BLOCK DIAGRAM – AMP SECTION – ..................... 33 7-39. SCHEMATIC DIAGRAM
– PANEL/POWER SUPPLY SECTION – ....................... 34 7-40. PRINTED WIRING BOARDS
7-7. PRINTED WIRING BOARD – RF BOARD – ............. 36 – PANEL SECTION (4/5) – ............................................. 68
7-8. SCHEMATIC DIAGRAM – RF BOARD – ................... 37 7-41. SCHEMATIC DIAGRAM
7-9. PRINTED WIRING BOARD – PANEL SECTION (4/5) – ............................................. 69
– DMB07 BOARD (Component Side) – .......................... 38 7-42. PRINTED WIRING BOARDS
7-10. PRINTED WIRING BOARD – PANEL SECTION (5/5) – ............................................. 70
– DMB07 BOARD (Conductor Side) – .......................... 39 7-43. SCHEMATIC DIAGRAM
7-11. SCHEMATIC DIAGRAM – PANEL SECTION (5/5) – ............................................. 71
– DMB07 BOARD (1/8) – ............................................... 40 7-44. PRINTED WIRING BOARDS
7-12. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION – ..................................... 72
– DMB07 BOARD (2/8) – ............................................... 41 7-45. SCHEMATIC DIAGRAM
7-13. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION – ..................................... 73
– DMB07 BOARD (3/8) – ............................................... 42
7-14. SCHEMATIC DIAGRAM 8. EXPLODED VIEWS
– DMB07 BOARD (4/8) – ............................................... 43 8-1. CASE SECTION ............................................................. 93
7-15. SCHEMATIC DIAGRAM 8-2. PANEL BOARD SECTION ............................................ 94
– DMB07 BOARD (5/8) – ............................................... 44 8-3. FRONT PANEL SECTION .............................................. 95
7-16. SCHEMATIC DIAGRAM 8-4. BACK PANEL SECTION ................................................ 96
– DMB07 BOARD (6/8) – ............................................... 45 8-5. HEAT SINK SECTION .................................................... 97
7-17. SCHEMATIC DIAGRAM 8-6. CHASSIS SECTION ........................................................ 98
– DMB07 BOARD (7/8) – ............................................... 46 8-7. DVD MECHANISM DECK SECTION-1
7-18. SCHEMATIC DIAGRAM (CDM79B-DVBU64) ....................................................... 99
– DMB07 BOARD (8/8) – ............................................... 47 8-8. DVD MECHANISM DECK SECTION-2
7-19. PRINTED WIRING BOARD
xiaoy u163. com

(CDM79B-DVBU64) ..................................................... 100
www
– VIDEO BOARD – ......................................................... 48 8-9. OPTICAL BLOCK SECTION ....................................... 101
– VIDEO BOARD – ......................................................... 49 9. ELECTRICAL PARTS LIST ............................... 102
7-21. PRINTED WIRING BOARDS
.
– CHANGER SECTION – ............................................... 50
4
HCD-ZX10D
SECTION 1
QQ 376315150 892498299
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP NOTE OF REPLACING THE DMB07 BOARD
BLOCK OR BASE UNIT When replacing the DMB07 board, since the adjustment value is
not set up correctly, “Drive Auto Adjustment” can’t be performed.
The laser diode in the optical pick-up block may suffer electrostatic In this case, initialize memory in the following procedures.
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body. Procedure:
During repair, pay attention to electrostatic break-down and also 1. Set the test mode. (See page 18)
use the procedure in the printed matter which is included in the 2. Press the [2] key on the remote commander, and set the
repair parts. “DRIVE MANUAL OPERATION”. (See page 21)
The flexible board is easily damaged and should be handled with 3. Press the [6] key on the remote commander, and set the “2-6,
care. Memory Check”. (See page 23)
4. Press the [CLEAR] key on the remote commander, and initialize
NOTES ON LASER DIODE EMISSION CHECK Memory.
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission, • MODEL IDENTIFICATION
observe from more than 30 cm away from the objective lens. –Back Panel–
TEL
TEL
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
13942296513
13942296513
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size) PART No.
: LEAD FREE MARK

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
QQ
QQ
applied to the solder joint for a slightly longer time.
TEL 13942296513 QQ 376315150 892498299

Soldering irons using a temperature regulator should be set to
about 350 °C.
376315150 892498299
376315150 892498299
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow) Model Name Part No.
than ordinary solder so use caution not to let solder bridges Singapore and Malaysia models 4-252-689-6[]
occur such as on IC pins, etc.
Iranian model 4-252-689-7[]
• Usable with ordinary solder
Australian model 4-252-689-8[]
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
RELEASING THE DISC TRAY LOCK

The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure :
1. Press ?/1 button to turn the power on.
2. Press the [FUNCTION] button to select the “DVD”.
3. Press two buttons of x (DVD) and Z OPEN/CLOSE
simultaneously and hold down until “UNLOCKED” displayed
on the fluorescent indicator tube (around 5 seconds).
Note: When “LOCKED” is displayed, the tray lock is not released by

turning power on/off with the ?/1 button.
www . xiaoy u163. com

5
HCD-ZX10D
QQ 376315150 892498299
HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF
2 Pull-out the disc tray.

TEL
TEL
13942296513
13942296513
1 Turn the gear (chuck)
in the direction of
arrow A.
A
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
DECISION TO PASS OR FAIL OF THE OPTICAL PICK-UP Checking Location:
BLOCK – DMB07 BOARD (Component Side) –
Connection:
oscilloscope
DMB07 board
CN901 1 pin +
CN901 3 pin –
Procedure:
1. Connect an oscilloscope to test point 1 pin and 3 pin of
CN901 on the DMB07 board.
2. Press the ?/1 button to turn the power on. CN901
3. Put the disc (LUV-P01) (Part No. 4-999-032-01) (CD) in to 1 7
playback.
4. Confirm that oscilloscope waveform is clear and check RF
signal level is correrect or not.
5. Put the disc (TDV-520CSO) (Part No. J-2501-236-A) (DVD)
in to playback.
6. Perform Comfirmation in the same manner as step 4.
Note: A clear RF signal waveform means that the shape “◊” can be clearly
distinguished at the center of the waveform.
RF signal waveform
VOLT/DIV: 200 mV
xiaoy u163. com

TIME/DIV: 500 ns
www .
CD: 1.05 ± 0.2 Vp-p
DVD: 1.09 ± 0.2 Vp-p
6
HCD-ZX10D
SECTION 2 This section is extracted from
QQ 376315150 892498299
GENERAL instruction manual.
• LOCATION OF CONTROLS
Main unit
ALPHABETICAL ORDER SYMBOLS
?/1 (power) 1
A–D I–Q
A Z e;
ALBUM +/– rl ILLUMINATION rs Z B wj
AMP MENU qk IR (receptor) ra V/v/B/b qh
CD SYNC w; JOG rk DVD Function:
CLOCK/TIMER SELECT 2 MEMORY 9 Z OPEN/CLOSE ta
CLOCK/TIMER SET 5 MIC 1/MIC 2 (jacks) ed NX (play/pause) rl
Deck A ea MIC LEVEL ef x (stop) rl
Deck B wh MODE t; m/M (rewind/fast forward)
DIRECTION eh P FILE ek rl
DISC 1 ~ 5 rh PHONES (jack) wf ./> (go backward/go
DISC SKIP td PLAY MODE rd forward) rl
Disc tray es Power illuminator wl TAPE A function:
DISPLAY 3 Preset Effect buttons 7 h/H (play) eh
TEL
TEL
Display 6 SALSA/REGGAE/POP/ x (stop) eh
DOLBY PL II tf SAMBA/TANGO/ROCK/ .m/M> eh
JAZZ/DANCE/MOVIE/
DVD MENU qj TAPE B function:
GAME
DVD TOP MENU qg h/H (play) ql
13942296513
13942296513
x (stop) ql
R–Z
E–H .m/M> ql
REC PAUSE/START wg
ECHO LEVEL eg
REPEAT rf
EFFECT ON/OFF ej
SLEEP 4
ENTER qh
SPEAKERS t;
EX-CHANGE ts
SOUND FIELD r;
FLASH rg
TUNER/BAND q;
FM MODE 8
TUNER ENTER qd
FUNCTION qs
TUNING –/+ qa
GAME ws
TUNING MODE qf
GAME INPUT AUDIO L/R
QQ
QQ
(jacks) wd
VOLUME +/– wk 1 23 456 7 89 q; qa qs
TEL 13942296513 QQ 376315150 892498299

X-GROOVE el
GAME INPUT VIDEO (jack) wd
GAME MIXING wa X-ROUND ON/OFF rj
376315150 892498299
376315150 892498299
rs qd
ra R
qf
r; qg
el qh
ek qj
ej qk
eh ql
w;
eg wa
ef ws
wd
ed
wf
es
ea e; wl wk wj wh wg
rd rf rg rh rj rk rl
www xiaoy u163. com

PLAY
MODE
HS s
.
tf td ts ta t;
7
HCD-ZX10D
QQ 376315150 892498299
Remote control
ALPHABETICAL ORDER
A–E F–Z
SYMBOLS
?/1 (power) 1
1
2
Setting the clock
Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.
ALBUM + 7 FM MODE 5 nN (play) 6
“CLOCK” appears in the display. Then, the
ALBUM – qa FUNCTION +/– q; X (pause) 6
x (stop) 6
hour indication flashes in the display.
ANGLE qk KARAOKE/MPX qf
AUDIO qk KEY CONTROL #/2 9 >10 qs 3 Press V or v repeatedly to set the
BAND wg Numeric buttons qd O RETURN ql hour.
m (rewind) w;
CLEAR wl
CLOCK/TIMER SELECT e;
PLAY MODE 4
REPEAT 5 M (fast forward) w; 4 Press ENTER.
CLOCK/TIMER SET e; SLEEP qh V/v/B/b wj The minute indication flashes in the

DISC SKIP wf SLOW / w; . (go backward) wk display.
DISPLAY wa SOUND FIELD +/– wd > (go forward) wk
5 Press V or v repeatedly to set the
DVD DISPLAY wh SUBTITLE qk minute.
DVD MENU 7 TUNER MEMORY 3
DVD SETUP ws TUNING MODE 4 6 Press ENTER.
DVD TOP MENU qa TUNING +/– wk The clock starts functioning.
TEL
TEL
ENTER wj TV CH +/– qg
TV/VIDEO ea
To adjust the clock
TV VOL +/– 2 1 Press CLOCK/TIMER SET.
TV ?/1 qj “SET” appears in the display, then “PLAY
13942296513
13942296513
VOLUME +/– 8 SET?” flashes in the display.
2 Press V or v repeatedly to select “CLOCK
SET?”, then press ENTER.
The hour indication flashes in the display.
ea qj 3 Do the same procedures as step 3 to 6
qh 1 above.
e; + + + +
Notes
– –
qg – –
2
• The clock settings are canceled when you disconnect
qk qf 3 the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode.
QQ
QQ
qd 4
TEL 13942296513
wl O
ql
qs O
QQ 376315150 892498299
5
376315150 892498299
376315150 892498299
– + y y – + y y
wk . > m M
w; . > m M
bB X x bB X x
6
–
V
+
wa qa –
V
+
7
wj B b + B b +
wh v
– v
–
8
wg + +
ws + +
– –
0 – –
9
wf wd

8
HCD-ZX10D
SECTION 3
QQ 376315150 892498299
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. FLOW CHART
SET
3-2. COVER (TOP)

(Page 10)
3-3. CASE
(Page 10)
TEL
TEL
3-4. LOADING PANEL
13942296513
13942296513
(Page 11)
3-5. FRONT PANEL SECTION

(Page 11)
3-6. BACK PANEL SECTION 3-12. TAPE MECHANISM DECK

(Page 12) (Page 15)
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
3-7. MAIN BOARD
(Page 12)
3-8. BRACKET (TR) BLOCK

(Page 13)
3-9. DVD MECHANISM DECK 3-10. OPTICAL TRAVERSE UNIT

(Page 13) (Page 14)
3-11. RF BOARD
(Page 14)

9
HCD-ZX10D
QQ 376315150 892498299
Note: Follow the disassembly procedure in the numerical order given.
3-2. COVER (TOP)
3 cover (top)
1 three screws
(BVTP3 × 8)
A
2 Push the cover (top)
in the direction of arrow A,
and release six claws.
TEL
TEL
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
3-3. CASE
4 case
3 four screws
(BVTP3 × 8)
2 three screws
(case 3 TP2)
www . xiaoy u163. com 1 three screws

(case 3 TP2)
10
HCD-ZX10D
QQ 376315150 892498299
3-4. LOADING PANEL
2 Pull-out the tray in the direction

of arrow B.
TEL
TEL
13942296513
13942296513
B
1 Rotate the gear (chuck)
3 loading panel
in the direction of arrow A.
A
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
1 two wires (flat type)
(CN104: 13 core, CN507: 21 core)
3 screw
(BVTP3 × 8)
2 connector 4 lead wire

(CN920)
2 two connectors
xiaoy u163. com

2 three connectors
www
(CN801, 802, 803)
.
6 front panel section
5 eight screws
(BVTP3 × 8)
11
HCD-ZX10D
QQ 376315150 892498299
3-6. BACK PANEL SECTION
2 three connectors
(CN1000, 1002, 1004)
1 wire (flat type) 9 3 four screws

(11 core) (CN504) (BVTP3 × 8)
4 VIDEO board
5 two screws
(BVTP3 × 8)
1 wire (flat type)
(17 core) (CN1202)
6 three screws
(BVTP3 × 8)
2 connector
TEL
TEL
(CN1200)
7 ten screws
(BVTP3 × 8)
13942296513
13942296513
8 four screws
(BVTP3 × 8)
qa back panel section

0 connector
(CN513)
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
3-7. MAIN BOARD
1 wire (flat type)

(7 core) (CN404)
5 wire (flat type)
(21 core) (CN503) 2 connector
(CN502)
7 MAIN board
6 connector
(CN506)
xiaoy u163. com

3 two screws
www
(BVTP3 × 8)
4 two connectors
(CN601, 602)
12
HCD-ZX10D
QQ 376315150 892498299
3-8. BRACKET (TR) BLOCK
5 three screws 7 bracket (TR) block

(BVTP3 × 8)
1 wire (flat type)

(29 core) (CN501)
6 two screws
(BVTP3 × 8)
TEL
TEL
13942296513
13942296513
3
4 connector
A
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
3-9. DVD MECHANISM DECK
4 two screws
(BV3)
3 two screws
(BV3)
5 DVD mechanism deck
www xiaoy u163. com

.
A
13
HCD-ZX10D
QQ 376315150 892498299
3-10. OPTICAL TRAVERSE UNIT
1 two screws
(BVTP3 × 8)
2 chuck assy
3 three step screws (M)

4 flexible flat cable
(24 core)
TEL
TEL
5 optical traverse unit
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
3-11. RF BOARD
3 flexible flat cable

(24 core) (CN001)
4 wire (flat type)
xiaoy u163. com

(29 core) (CN002)
www
2 flexible board
5 RF board (CN003)
. 1 two screws
(BTP2.6 × 10)
14
HCD-ZX10D
QQ 376315150 892498299
3-12. TAPE MECHANISM DECK
3 tape mechanism deck
1 five screws
(BVTP2.6 × 8)
2 lead wire
TEL
TEL
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

15
HCD-ZX10D
SECTION 4
QQ 376315150 892498299
TEST MODE
GC TEST MODE 5. When the [VOLUME] knob is turned counterclockwise even
This mode is used to check the fluorescent indicator tube, LED, slightly, the sound volume decreases to its minimum and a
model, destination, software version, volume, key, jog and VACS message “VOLUME MIN” appears on the fluorescent
level. indicator tube.
Procedure:
1. Press three buttons of x (TAPE B), [TUNER ENTER] , and • Tape function
[DISC 2] simultaneously. 1. When a tape is inserted in deck-B and recording is started, the
2. All LEDs and segments in fluorescent indicator tube are lighted function is changed to “VIDEO” automatically. When
up. [CD SYNC] button is pressed during recording in function, ALC
3. When you want to enter the software version display mode, (Automatic Logic Control) is turned on.
press the [DISC 1] button. The model and destination are dis- 2. During recording, press the . m (TAPE B) button will
played. stop the recording and the function is changed to “TAPE B”
4. Each time [DISC 1] button is pressed, the display changes from and rewind the tape in deck-B until the recording start position
MC version, GC version, CD version, ST version, TC version, and playback of the tape is started. If the [REC PAUSE/START]
TA version, TM version in this order, and returns to the MC button is pressed for a pause and pressed again to resume
version display. recording during recording time, when the tape is rewind, the
5. When [DISC 3] button is pressed while the version numbers are tape will be rewind until the position where the pause is applied.
TEL
TEL
being displayed except model and destination, the date of the
software creation appear. When [DISC 3] button is pressed again, • AMS test mode
the display returns to the software version display. When 1. Press the [FUNCTION] button to select the “TAPE A” or “TAPE
13942296513
13942296513
[DISC 1] button is pressed while the date of the software creation B”.
is being displayed, the date of the software creation is displayed 2. Press the [DIRECTION] button to select loop or relay mode.
in the same order of software version display. Insert a test tape AMS-110A or AMS-120 to selected tape
6. Press the [DISC 2] button, the key check mode is activated. deck.
7. In the key check mode, the fluorescent indicator tube displays 3. Press the [AMP MENU] button to enter the AMS test mode.
“K 0 J0 V0”. Each time a button is pressed, “K” value 4. After the test tape is rewind to the beginning of the tape, the
increases. However, once a button has been pressed, it is no AMS+ is checked, and the mechanism is shut off after detecting
longer taken into account. the AMS signal twice.
8. When [DISC 3] button is pressed after all LEDs and segments 5. Then the AMS– is checked and the mechanism is shut off
in fluorescent indicator tube light up, the fluorescent indicator after detecting the AMS signal twice.
QQ
QQ
tube displays “VACS A APBB”. A is VACS level which is 6. When the check is complete, a message of either “OK” or
TEL 13942296513 QQ 376315150 892498299

trigger by signal level while BB is VACS level which is trigger “NG” appears on the fluorescent indicator tube.
by APVACS (Abuse Protection VACS).
376315150 892498299
376315150 892498299
9. When [EX-CHANGE] button is pressed after all LEDs and • To release MC test mode
segments in fluorescent indicator tube light up, alternate 1. To release from this mode, press the I/1 button.
segments in fluorescent indicator tube would light up. If you 2. The cold reset is enforced at the same time.
press [EX-CHANGE] button again, another half of alternate
segments in fluorescent indicator tube would light up. Pressing COLD RESET
[EX-CHANGE] button again would cause all segments lights up. The cold reset clears all data including preset data stored in the
10. To release from this mode, press three buttons in the same RAM to initial conditions. Execute this mode when returning the
manner as step 1, or disconnect the power cord. set to the customer.
Procedure:
MC TEST MODE 1. Press three buttons of x (TAPE B), [TUNER ENTER] , and
This mode is used to check operations of the respective sections of I/1 simultaneously.
amplifier, tuner, and tape. 2. The fluorescent indicator tube becomes blank for a while, and
Procedure: the set is reset.
• To enter MC test mode
1. Press three buttons of x (TAPE B), [TUNER ENTER] , and VACS ON/OFF
[DISC 3] simultaneously. This mode is used to switch on and off the VACS (Variable
2. The 4 speaker symbols and CD ring indicators flash on the Attenuation Control System).
fluorescent indicator tube. The function is changed to Procedure:
“VIDEO”. 1. Press the I/1 button to turn the power on.
2. Press two buttons of [PLAY MODE] and I/1 simultaneously.
• Check of amplifier The message “VACS OFF” or “VACS ON” appears on the
1. When [ENTER] button is pushed with the up side, GEQ fluorescent indicator tube.
increases to its maximum and a message “GEQ MAX” appears
on the fluorescent indicator tube. AM STEP CHANGE
2. When [ENTER] button is pushed with the down side, GEQ The step interval of AM channels can be toggled between 9 kHz
decreases to its minimum and a message “GEQ MIN” appears and 10 kHz.
xiaoy u163. com

on the fluorescent indicator tube.
www
Procedure:
3. When [ENTER] button is pushed with the left side or ENTER 1. Press the I/1 button to turn the power on.
button is pushed with the right side, GEQ is set to flat and a 2. Press the [TUNER/BAND] button to select the “AM”.
message “GEQ FLAT” appears on the fluorescent indicator 3. Press the I/1 button to turn the power off.
.
tube. 4. Press two buttons of [TUNER ENTER] and I/1 simultaneously.
4. When the [VOLUME] knob is turned clockwise even slightly, The system will turn on automatically. The message “AM 9k
the sound volume increases to its maximum and a message STEP” or AM 10k STEP” appears on the fluorescent indicator
“VOLUME MAX” appears on the fluorescent indicator tube. tube and thus the channel step is changed.
16
HCD-ZX10D
QQ 376315150 892498299
REPEAT 5 LIMIT OFF MODE
The number of repeat for disc playback is 5 times when the repeat
mode is “REPEAT ALL”. This mode enables the disc to repeat
playback for limitless times.
Procedure:
CD TRAY LOCK MODE
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when Z OPEN/CLOSE button or
[EX-CHANGE] button is pressed. The message “LOCKED” will be
displayed in on the fluorescent indicator tube.
1. Press the I/1 button to turn the power on. Procedure:
2. Press the [FUNCTION] button to select the “DVD”. 1. Press the I/1 button to turn the power on.
3. Press three buttons of x (TAPE B), [TUNER ENTER] , and 2. Press the [FUNCTION] button to select the “DVD”.
[REPEAT] simultaneously to enter the repeat 5 limit off mode 3. Press two buttons of x (DVD) and Z OPEN/CLOSE simul-
and the fluorescent indicator tube displays “LIMIT OFF”. taneously and hold down until “LOCKED” or “UNLOCKED”
4. To release from this mode, operate the cold reset. displayed on the fluorescent indicator tube (around 5 seconds).
DVD SHIP MODE (WITH MEMORY CLEAR) VIDEO/SAT SWITCHING

This mode moves the optical pick-up to the position durable to This mode let you switch from VIDEO to SAT and vice-versa.
vibration and clears all data including preset data stored in the RAM Procedure:
to initial conditions. Use this mode when returning the set to the 1. Set to the power off state.
customer after repair. 2. Press two buttons of [FUNCTION] and I/1 simultaneously.
TEL
TEL
Procedure: The set power on automatically and the function will changed
1. Press the I/1 button to turn the power on. to SAT. Do the same procedures again to change from SAT to
2. Press the [FUNCTION] button to select the “DVD”. VIDEO.
13942296513
13942296513
3. Press two buttons of [EX-CHANGE] and I/1 simultaneously.
The set will power off automatically. DVD COLOR SYSTEM SWITCHING
4. After the “STANDBY” blinking display finish, a message This mode let you change the color system of the video output from
“LOCK” is displayed on the fluorescent indicator tube and PAL to NTSC or vice-versa.
the DVD ship mode is set. Procedure:
1. Press the I/1 button to turn the power on.
DVD SHIP MODE (WITHOUT MEMORY CLEAR) 2. Press the [FUNCTION] button to select the “DVD”.
This mode moves the optical pick-up to the position durable to 3. Press the I/1 button to turn the power off.
vibration. Use this mode when returning the set to the customer 4. Press two buttons of x (TAPE B) and I/1 simultaneously.
after repair. The set will power on automatically.
QQ
QQ
Procedure: 5. The message “COLOR SYSTEM PAL” or “COLOR
TEL 13942296513
2. Press the [FUNCTION] button to select the “DVD”. QQ 376315150 892498299
SYSTEM NTSC” will be displayed on the fluorescent
indicator tube
376315150 892498299
376315150 892498299
3. Press two buttons of [REPEAT] and I/1 simultaneously. The
set will power off automatically. DVD PROGRESSIVE
4. After the “STANDBY” blinking display finish, a message This mode let you change the video signal format from progressive
“LOCK” is displayed on the fluorescent indicator tube and format to interlace format if you accidentally change the
the DVD ship mode is set. COMPONENT OUT settings in DVD SETUP MENU to progressive
and your TV cannot accept progressive signal.
DVD POWER MANAGE Procedure:
This mode let you switch on or off power supply to the ZIVA during 1. Press the I/1 button to turn the power on.
tuner function. 2. Press the [FUNCTION] button to select the “DVD”.
When DVD power is set to off, the power supply to the ZIVA is cut 3. Press two buttons of x (DVD) and [DVD MENU] simul-
off during tuner function. It will increase the time taken to access taneously.
disc when function change from tuner to DVD but it will improve
tuner reception performance.
When DVD power is set to off, the power supply to the ZIVA is not
cut off during tuner function. It will reduce the time taken to access
disc when function change from tuner to DVD but it will decrease
tuner reception performance.
Procedure:
2. Press the [FUNCTION] button to select the “DVD”.
3. Press the I/1 button to turn the power off.
4. Press two buttons of x (DVD) and I/1 simultaneously. The
set will power on automatically.
5. The message “DVD POWER ON” or “DVD POWER OFF”
will be displayed on the fluorescent indicator tube.

17
HCD-ZX10D
QQ 376315150 892498299
DVD SECTION
DVD TEST MODE GENERAL DESCRIPTION

This mode let you make diagnosis and adjustment easily by using
OPERATING DVD TEST MODE
0. Syscon Diagnosis
The same contents as board detail check by serial interface can be
checked from the remote commander operation.
the remote commander and monitor TV. The instructions, diagnostic
results, etc. are given on the on-screen display (OSD). On the Test Mode Menu screen, press [10/0] key on the remote
commander, and the following Check Menu will be displayed.
• Test Disc List
Use the following test disc on test mode. ### Syscon Diagnosis ###
TDV-520CSO (DVD-SL): Part No. J-2501-236-A
LUV-P01 (CD) : Part No. 4-999-032-01 Check Menu
TDV-540C (DVD-DL) : Part No. J-2501-235-A 0. Quit
Note: Do not use existing test disc for DVD. 1. All
2. Version
STARTING DVD TEST MODE 3. EEPROM
1. Press the I/1 button to turn the power on. 4. GPIO
2. Press the [FUNCTION] button to select the “DVD”. 5. SD Bus
TEL
TEL
3. Press two buttons of x (DVD) and Z OPEN/CLOSE 6. Video
simultaneously, and then turn the [VOLUME] knob clockwise.
4. The message “SERVICE IN” will be displayed on the
13942296513
13942296513
fluorescent indicator tube and the Test Mode Menu is displayed
on the on-screen display on the monitor TV as follows. The
model name and revision number is displayed at the bottom
of the on-screen display 0-0. Quit
Quit the Syscon Diagnosis and return to the Test Mode Menu.
Test Mode Menu 0-1. All (All items continuous check)

This menu checks all diagnostic items continuously. Normally, all
0. Syscon Diagnosis items are checked successively one after another automatically
1. Drive Auto Adjustment unless an error is found, but at a certain item that requires judgment
QQ
QQ
through a visual check to the result, the following screen is displayed
QQ 376315150 892498299
2. Drive Manual Operation
TEL 13942296513
3. Mecha Aging for the key entry.
376315150 892498299
376315150 892498299
4. Emergency History
5. Mecha Error History Example display
6. Version Information
7. Video Level Adjustment ### Syscon Diagnosis ###
Exit: POWER Key
Model :LBT-ZX10D xx Diag All Check
Revision :x.xx No.2 Version
5. To execute each function, press its number by using numeric 2-2. Version
button on the remote commander (RM-SD5). ROM Reversion = X.XX
6. To release from this mode, press the I/1 button to turn the
power off.
Press NEXT Key to Continue

Press PREV Key to Repeat
For the ROM check, the check sum calculated by the syscon is
output, and therefore you must compare it with the specified value
for confirmation.
Following the message, press the > button to go to the next item,
or press the . button to repeat the same operation again.
To quit the diagnosis and return to Check Menu screen, press the
[RETURN] key on the remote commander to display Check Menu.
• Error occurred
xiaoy u163. com

If an error occurred, the diagnosis is suspended and error is displayed.
www
Press the [RETURN] key on the remote commander to quit the
diagnosis, or press the . button to repeat the same check where
an error occurred, or press the > button to continue the check
.
from the item next to faulty item.
18
HCD-ZX10D
QQ 376315150 892498299
General Description of Checking Method
Selecting 2 and subsequent items call the submenu screen of each
item. And selecting 2 and subsequent items execute respective menus
and outputs the results.
For the contents of each submenu, see “Check Items List” as below.
1. Drive Auto Adjustment
On the Test Mode Menu screen, press the [1] key on the remote
commander, the Adjustment Menu will be displayed.
## Drive Auto Adjustment ##

Adjustment Menu
Check Items List:
0-2. Version 0. ALL
0-2-1. All 1. DVD-SL
0-2-2. Revision 2. CD
0-2-3. ROM Check Sum 3. DVD-DL
0-2-4. Model Type
0-2-5. Region
0-3. EEPROM Check
0-3-1. Sampling Check
0-3-2. Detail Check
0-4. GP I/O Check Exit: RETURN
TEL
TEL
0-5. SD Bus Check
0-6. Video Check
Normally, [10/0] is selected to adjust DVD (single layer), CD and
13942296513
13942296513
0-2. Version DVD (dual layer) in this order. But, individual items can be adjusted
0-2-2. Revision for the case where adjustment is suspended due to an error. In this
The revision number of ROM IC205 that the program for mode, the adjustment can be made easily through the operation
the DVD system processor (IC207) is stored. following the message displayed on the screen. The disc used for
adjustment must be the one specified for adjustment.
0-2-3. ROM Check Sum
Check sum is calculated. (4 digits hexadecimal number) 1-0. ALL
Press the 10/0 key on the remote commander, and the servo set data
0-2-4. Model Type in EEPROM will be initialized. Then, DVD-SL disc, CD disc, and
Model name is displayed. (LBT-ZX10D) DVD-DL disc are adjusted in this order. Each time one disc was
QQ
QQ
adjusted, it is ejected. Replace it with the specified disc following
TEL 13942296513 QQ 376315150 892498299

0-2-5. Region the message. You can finish the adjustment by pressing the [RETURN]
Model destination code is displayed. (2 digits number) key on the remote commander.
376315150 892498299
376315150 892498299
0-3. EEPROM Check Note: During adjustment of each disc, the measurement for disc type
0-3-1. Sampling Check judgment is made. As automatic adjustment does not judge the disc
EEPROM check at every 64 words. type unlike conventional models, take care not to insert wrong type
It compares read data with write data of each address. When discs. Also, do not give a shock during adjustment.
there are discrepancies between two data, it displays error.
0-3-2. Detail Check

EEPROM check at every 1 word.
It compares read data with write data of each address. When
there are discrepancies between two data, it displays error.
0-4. GP I/O Check

Pull up/down setting check of the DVD system processor (IC207)
pin 150, 151 and 154 (for clock setting port).
0-5. SD Bus Check

SD bus data check between DVD decoder (IC701) and D-RAM
(IC706).
0-6. Video Check

Output the color bars for video level adjustment.

19
HCD-ZX10D
QQ 376315150 892498299
1-1. DVD-SL (single layer)
Press the [1] key on the remote commander and insert a DVD single
layer disc following the message. Then the adjustment will be made
through the steps below, then adjusted values will be written to the
EEPROM.
1-2. CD
Press the [2] key on the remote commander and insert a CD disc
following the message. Then the adjustment will be made through
the steps below, then adjusted values will be written to the EEPROM.
CD Adjustment Steps:
DVD Single Layer Disc Adjustment Steps: 1. Sled tilt rest
1. Sled tilt reset 2. Disc check memory CD
2. Disc check memory SL 3. Wait 500 msec
3. Wait 300 msec 4. Set disc type CD
4. Set disc type SL 5. LD on
5. LD on 6. Spindle start
6. Spindle start 7. Wait 500 msec
7. Wait 1 sec 8. Focus servo on 0
8. Focus servo on 0 9. Auto track offset adjust
9. Auto track offset adjust 10. CLVA on
10. CLVA on 11. Wait 500 msec
TEL
TEL
11. Wait 500 msec 12. Tracking on
12. Tracking on 13. (TC display start)
13. Wait 1 sec 14. Wait 1 sec
13942296513
13942296513
14. Sled on 15. Jitter display start
15. Check CLV on 16. Sled ON
16. Auto LFO adjust 17. Check CLV on
17. Auto focus offset adjust 18. Auto loop filter offset adjust
18. Auto tilt position adjust 19. Auto focus offset adjust
19. Auto focus gain adjust 20. Auto focus gain adjust
20. Auto focus offset adjust 21. Auto focus offset adjust
21. EQ boost adjust 22. EQ boost adjust
22. Auto loop filter offset adjust 23. Auto LFO adjust
23. Auto track gain adjust 24. Auto track gain adjust
QQ
QQ
Search check Search check
TEL 13942296513 QQ 376315150 892498299

24. 32 track jump forward 25. 32 track jump forward
25. 32 track jump reverse 26. 32 track jump reverse
376315150 892498299
376315150 892498299
26. 500 track jump forward 27. 500 track jump forward
27. 500 track jump reverse 28. 500 track jump reverse
28. All servo stop 29. All servo stop
29. EEP copy loop

20
HCD-ZX10D
QQ 376315150 892498299
1-3. DVD-DL (dual layer)
Press the 3 key on the remote commander and insert a DVD dual
layer disc following the message. Then the adjustment will be made
through the steps below, then adjusted values will be written to the
EEPROM.
2. Drive Manual Operation
Note: This mode is used for design, and not used in service fundamentally.
On the Test Mode Menu screen, press the [2] key on the remote
commander, and the Operation Menu will be displayed. For the
manual operation, each servo on/off control and adjustment can be
DVD Dual Layer Disc Adjustment Steps: executed manually.
1. Sled tilt reset
2. Disc check memory DL ## Drive Manual Operation ##
3. Wait 500 msec Operation Menu
4. Set disc type DL 1. Disc Type
5. LD on 2. Servo Control
6. Spindle start 3. Track/Layer Jump
7. Wait 1 sec 4. Non EEPROM Write Adjust
Layer 1 Adjust 5. EEPROM Write Adjust
8. Focus servo on 0 6. Memory Check
9. Auto track offset adjust 7. Disc Check Memory
TEL
TEL
10. CLVA on 8. Error Rate Display
11. Wait 500 msec 9. SACD Water Mark
12. Tracking on
13942296513
13942296513
13. Wait 500 msec Exit: RETURN
14. Sled on
15. Check CLV lock In using the manual operation menu, take care of the following
16. Auto loop filter offset adjust, Auto focus adjust points. These commands do not provide protection, thus requiring
17. Auto focus gain adjust correct operation. The sector address or time code field is displayed
18. Auto focus offset adjust when a disc is loaded.
19. EQ boost adjust
20. Auto loop filter offset adjust Note:
21. Auto Track Gain Adjust 1. Set correctly the disc type to be used on the Disc Type screen.
Search check 2. In case of an alarm, immediately press the x button to stop the
QQ
QQ
22. 32 track jump forward servo operation, and press the I/1 button to turn the power off.
TEL 13942296513 QQ 376315150 892498299

23. 32 track jump reverse
24. 500 track jump forward
376315150 892498299
376315150 892498299
25. 500 track jump reverse Basic operation:
Layer 0 Adjust (controllable from front panel or remote commander)
26. Focus jump (L1 → L0) I/1 : Power off (release the test mode)
27. Auto track offset adjust L0 x : Servo stop
Z OPEN/CLOSE : Stop and eject/loading
28. CLVA on
29. Wait 500 msec [RETURN] : Return to Operation Menu or Test Mode Menu
. , > : Transition between sub modes of menu
30. Tracking on
31. Wait 500 msec [1] to [9] , [10/0] : Selection of menu items
32. Sled on Cursor v / V : Increase/Decrease in manually adjusted value
33. Check CLV lock
34. Auto focus filter offset Adjust
35. Auto Focus Adjust
36. Auto focus gain adjust
37. Auto focus offset adjust
38. EQ boost adjust
39. Auto Loop Filter Offset
40. Auto track gain adjust
Search check
Layer Jump check
45. Layer jump (L0 → L1)
46. Layer jump (L1 → L0)
47. All servo stop

21
HCD-ZX10D
QQ 376315150 892498299
2-1. Disc Type
Disc Type
Disc Type Select

2-1-3. Disc Type CD
It sets up so that it may judge as a disc type of specification of the
disc with which the set was inserted.
[1]: CD disc (normal speed, 12 cm)
[2]: CD disc (double speed, 12 cm)
[3]: CD disc (normal speed, 8 cm)
1. Disc Type Auto Check [4]: CD disc (double speed, 8 cm)
2. Set Disc Type DVD [5]: CD-RW disc (normal speed, 12 cm)
3. Set Disc Type CD [6]: CD-RW disc (double speed, 12 cm)
4. Set Disc Type Hybrid [7]: CD-RW disc (normal speed, 8 cm)
[8]: CD-RW disc (double speed, 8 cm)
2-1-4. Disc Type Hybrid

It sets up so that it may judge as a disc type of specification of the
Exit: RETURN disc with which the set was inserted.
[1]: SACD Hybrid disc (SACD layer, 12 cm)
[2]: SACD Hybrid disc (CD layer, normal speed, 12 cm)
TEL
TEL
2-1-1. Disc Type Auto Check [3]: SACD Hybrid disc (CD layer, double speed, 12 cm)
1. Press the [1] key on the remote commander to display the Disc [4]: SACD Hybrid disc (SACD layer, 8 cm)
Type Auto Check screen. [5]: SACD Hybrid disc (CD layer, normal speed, 8 cm)
13942296513
13942296513
2. Insert a disc and press the [ENTER] key on the remote [6]: SACD Hybrid disc (CD layer, double speed, 8 cm)
commander.
3. It judges the type of inserted disc automatically and displays 2-2. Servo Control
the disc type and so on as below. Note: Be sure to perform the disc type setup before performing this item.
Disc Type Auto Check Servo Control

1. LD off R.Sled FWD
Disc Type xx 2. Focus off L.Sled REV
Layer xx 3. SPDL off U.Sled Reset
Mirr Time xx 4. CLVA off D.Sled Limit
QQ
QQ
Mirr Count xx 5. Trk. off
TEL 13942296513 QQ 376315150 892498299

FZC Count xx 6. Sled off
PI Reference xx 7. Fcs.Srch off
376315150 892498299
376315150 892498299
PI Peak xx
ENTER.Execute 0. All Servo Off
Exit: RETURN Exit: RETURN
Disc Type : CD, DVD or Hybrid (SACD) On this screen, the servo on/off control necessary for replay is
Layer : SINGLE, DUAL or HYBRID executed. Normally, turn on each servo from 1 sequentially and
Mirr Time : Mirror time of between disc surface and record when CLVA is turned on, the usual trace mode becomes active. In
surface when disc type judgment. (hexadecimal the trace mode, DVD sector address or CD time code is displayed.
number) This is not displayed where the spindle is not locked. The spindle
Mirr Count : The number of times which mirror counts between could run overriding the control if the spindle system is faulty or
disc surface and record surface when disc type RF is not present. In such a case, do not operate CLVA.
judging.
FZC Count : The number of times which focus zero cross points [1] LD : Turn on/off the laser.
of each layer when lens down. [2] Focus : Search the focus and turn on the focus.
PI Reference : The average of PI reference voltage. (hexadecimal [3] SPDL : Turn on/off the spindle.
number) [4] CLVA : Turn on/off normal servo of spindle servo.
PI Peak : PI peak level voltage. It performs only when disc [5] Trk. : Turn on/off the tracking servo.
type judgment is successful. (hexadecimal number) [6] Sled : Turn on/off the sled servo.
[7] FCS. Srch : Turn on/off the focus search.
2-1-2. Disc Type DVD [10/0] : All servo off.
It sets up so that it may judge as a disc type of specification of the b Sled FWD (right cursor) : Move the sled forward.
disc with which the set was inserted. B Sled REV (left cursor) : Move the sled reverse.
[1]: DVD single layer disc (12 cm) V Sled FWD (up cursor) : Reset the sled.
[2]: DVD dual layer disc (0 layer, 12 cm) v Sled REV (down cursor) : Limit in the sled.
xiaoy u163. com

[3]: DVD dual layer disc (1 layer, 12 cm)
www
[4]: DVD-RW disc (12 cm)
[5]: DVD single layer disc (8 cm)
[8]: DVD-RW disc (8 cm)
.
22
HCD-ZX10D
QQ 376315150 892498299
2-3. Track/Layer Jump
1. 1Tj
2. 1Tj
Track/Layer Jump
FWD
REV
2-5. EEPROM Write Adjust
1.
EEPROM Write Adjust
Focus Offset
3.500Tj Fine FWD 2. Focus Gain
4.500Tj Fine REV 3. Trk. Offset Coarse
5.10kTj Dirc FWD 4. ------------
6.10kTj Dirc REV 5. Trk. Gain
7.20kTj Dirc FWD 6. EQ Boost
8.20kTj Dirc REV
0. All Servo Off
0.All Servo Off
Exit: RETURN Exit: RETURN
On this screen, track jump, etc. can be performed. Only for the DVD On this screen, each item can be adjusted automatically. Select the
TEL
TEL
dual layer disc, the focus jump and layer jump are displayed in the desired number [1] to [10/0] from the remote commander, and
right field selected item is adjusted automatically.
[1] Focus Offset : Adjusts focus offset.
13942296513
13942296513
[1] 1Tj FWD : 1 track jump forward.
[2] Focus Gain : Adjusts focus gain.
[2] 1Tj REV : 1 track jump reverse.
[3] TRK. Offset Coarse : Adjusts tracking offset of the RF
[3] 500Tj FWD : 500 track jump (fine search)forward.
amplifier (IC001) side.
[4] 500Tj REV : 500 track jump (fine search) reverse.
[5] TRK. Gain : Adjusts track gain.
[5] 10kTj FWD : 10k track jump (direct search) forward.
[6] EQ Boost : Adjusts amount of boost of
[6] 10kTj REV : 10k track jump (direct search) reverse.
equalizer.
[7] 20kTj FWD : 20k track jump (direct search) forward.
[10/0] : All servo off.
[8] 20kTj REV : 20k track jump (direct search) reverse.
[10/0] : All servo off. 2-6. Memory Check
Display images are shown as follows, and all two screens are able
QQ
QQ
2-4. Non EEPROM Write Adjust to switch by the V key (UP) or v key (DW).
TEL 13942296513Non EEPROM Write Adjust QQ 376315150 892498299

EEPROM Data 1/2 CD SL L0 L1
376315150 892498299
376315150 892498299
Focus Gain xx xx xx xx
1. Focus Offset Trk. Gain xx xx xx xx
2. Focus Gain Focus Offset xx xx xx xx
3. Trk. Offset Coarse Trk. Offset xx xx xx xx
4. Trk. Offset Fine EQ. Boost xx xx xx xx
5. Trk. Gain PI Level xx xx -- --
6. EQ Boost Fcs. Balance -- xx -- --
Jitter xx xx xx xx
0. All Servo Off Mirror Time xx xx xx --
FE Level -- xx -- --
Traverse Lv1. -- xx -- --
Exit: RETURN Next:DW Default:CLR Exit:RET
On this screen, each item can be adjusted automatically. Select the

desired number [1] to [10/0] from the remote commander, and current EEPROM Data 2/2 CDRW DVDRW
setting for the selected item will be displayed, then increase or Focus Gain xx xx
decrease numeric value with the V key or v key. This value is Trk. Gain xx xx
stored in the EEPROM. If CLV has been applied, the jitter is Focus Offset xx xx
displayed for reference for the adjustment. Trk. Offset xx xx
EQ. Boost xx xx
[1] Focus Offset : Adjusts focus offset.
[2] Focus Gain : Adjusts focus gain.
[3] TRK. Offset Coarse : Adjusts tracking offset of the RF
amplifier (IC001) side.
[4] TRK. Offset Fine : Adjusts tracking offset of the DSP
(IC401) side.
xiaoy u163. com

[5] TRK. Gain : Adjusts track gain. Prev:UP Default:CLR Exit:RET
www
[6] EQ Boost : Adjusts amount of boost of
equalizer. On this screen, current servo adjusted data stored in the EEPROM
[10/0] : All servo off. are displayed. The adjusted data are initialized by pressing the
.
[CLEAR] key, but be careful that they are not recoverable after
initialization.
Before clearing the adjusted data, make a note of the set data. This
screen will also appear if “0. ALL” is selected in the Drive Auto
Adjustment. In this case, default setting cannot be made.
23
HCD-ZX10D
QQ 376315150 892498299
2-7. Disc Check Memory
Disc Check Memory
1. SL Disc check
3. Mecha Aging
On the Test Mode Menu screen, selecting [3] executes the aging of
the mechanism deck.
### Aging Test MENU ###

2. CD Disc check ** Pls use over 40min.CD **
3. DL Disc check Operation Menu
1. Open/Close Test
Exit: RETURN
On this screen, measure the mirror time of chucked disc, and write Exit: RETURN
TEL
TEL
to the EEPROM.
1. On the Aging Test MENU screen, press the [1] key on the
2-8. Error Rate Display remote commander to display the Open/Close Test screen.
13942296513
13942296513
2. Insert discs and press the [ENTER] key on the remote
Error Rate Display commander.
UC CR Address 3. Is starts the aging.
PI1 Err Now xx xxxx xxxxxxxx During aging, the disc number, operating status and repeat
Max xx xxxx xxxxxxxx cycle are displayed. Aging can be aborted at any time by
Avg xx xxxx xxxxxxxx pressing the [RETURN] key. After the operation is stopped,
PI2 Err Now xx xxxx xxxxxxxx press the [RETURN] key to return to the Aging Test MENU.
Max xx xxxx xxxxxxxx
Avg xx xxxx xxxxxxxx
PO Err Now xx xxxx xxxxxxxx
QQ
QQ
Max xx xxxx xxxxxxxx
TEL 13942296513 QQ 376315150 892498299

Avg xx xxxx xxxxxxxx
376315150 892498299
376315150 892498299
Exit: RETURN
On this screen, measure and display the error rate.
UC : Incorrect value
CR : Correct value
2-9. SACD Water Mark Check
SACD Water Mark Check
PSP AMP
PSN
Adjust Error Failed

Start: ENTER Stop: RETURN
On this screen, measure the PSP AMP value and PSN value of SACD
water mark.

24
HCD-ZX10D
QQ 376315150 892498299
4. Emergency History
On the Test Mode Menu screen, selecting [4] displays the
information such as servo emergency history. The history
information from last 1 up to 10 can be scrolled with the V key
or v key. Also, specific information can be displayed by directly
5. Mecha Error History
On the Test Mode Menu screen, selecting [5] displays the
information of mechanism deck error history.
The history information from last 1 up to 8 can be scrolled with
the V key or v key. Also, specific information can be displayed
entering that number with ten keys. by directly entering that number with ten keys.
### EMG. History ###

### Mecha Error History ###
Laser Hours CD xxxxhxxm
DVD xxxxhxxm 1. aa bb cc xx xx xx xx xx
2. aa bb cc xx xx xx xx xx
a. bb xx xx xx xx xx xx xx 3. aa bb cc xx xx xx xx xx
xx xx xx xx xx xx xx xx 4. aa bb cc xx xx xx xx xx
a. bb xx xx xx xx xx xx xx 6. aa bb cc xx xx xx xx xx
xx xx xx xx xx xx xx xx 7. aa bb cc xx xx xx xx xx
TEL
TEL
Select:1-9 Scroll:UP/DOWN
(1.Latest EMG.) Exit: RETURN Scroll:UP/DOWN
13942296513
13942296513
(1.Latest Err.) Exit: RETURN
xxxxhxxm : The laser on total hours. Data below minutes are
omitted. aa : Initialization is completed or not.
a. : Error number. FF : Complete.
bb : Error code. other number : Not complete.
xx : Not used. bb : Operating status of mechanism deck at an error occurred.
(lod sq jcp)
• Clearing History Information 00 : Initializing.
Clearing laser hours: 10 to 15 : Open operating.
Press the [DVD DISPLAY] and [CLEAR] keys in this order. 16 to 19 : Kicking cause open failed.
QQ
QQ
Then both CD and DVD data are cleared. 1A to 1F : Open operating.
TEL 13942296513
Clearing emergency history:
Press the [DVD TOP MENU] and [CLEAR] keys in this order. QQ 376315150 892498299
20 to 27 : Complete the open operation.
28 : No disc and complete the open operation.
376315150 892498299
376315150 892498299
Initializing set up data: 29 to 2F : Complete the open operation.
Press the [DVD MENU] and [CLEAR] keys in this order. 30 to 3F : Close requesting.
The data have been initialized when “Set Up Initialize” message 40 to 4F : Open requesting.
is displayed, the EMG. History screen will be restored soon. 50 to 5F : Close operating.
60 to 6F : Complete the chucking operation.
• Code list of Emergency History 80 to 8F : Complete the release operation.
10: Communication to RF amplifier (IC001) failed. (BU is home position)
11: Each servo for focus, tracking, and spindle is unlocked. 90 to 9F : BU down operating.
12: Check sum error of EEPROM (IC204). A0 to AF : Opening/closing the shutter. Or stationary state
14: Communication to servo DSP (IC509) failed, or servo DSP in open/close the shutter is enablement.
(IC509) is faulty. B0 to BF : BU up requesting.
15: Communication to DVD decoder (IC701) failed, or DVD C0 to CF : BU down requesting.
decoder (IC701) is faulty. D0 to DF : BU upping.
16: Communication to DSD decoder (not used) failed, or DSD E0 to EF : No disc checking in disc loading.
decoder (not used) is faulty. cc : Operating status of mechanism deck at an error occurred.
20: Initialization of sled servo failed. It is not placed in the initial (lod op jcp)
position. 00 : Complete the operation.
23: Sled servo operation error. 10 to 1F : Open operating.
24: Made a request to move the sled servo to wrong position. 20 to 2F : Close operating.
30: Tracking balance adjustment error. 30 to 3F : Release operating.
31: Tracking gain adjustment error. 60 to 6F : Chucking operating.
33: Focus bias adjustment error. 70 to 7F : Kicking operating.
34: Focus gain adjustment error. 80 to 8F : Returning the BU to home position. (after
35: Equalizer adjustment error. kicking)
40: Focus servo does not operate.
41: With a DVD dual layer disc, focus jump failed.
xiaoy u163. com

50: CLV (spindle) servo does not operate.
www
51: Spindle does not stop.
60: Made a request to seek nonexistent address.
61: Seek error of retry more than regulated times.
.
70: Control data could not be read.
80: Disc reading failed.
25
HCD-ZX10D
QQ 376315150 892498299
6. Version Information
On the Test Mode Menu screen, selecting [6] displays the ROM
version and region code.
The parenthesized hexadecimal number in version field is checksum
value of ROM.
## Version Information ##
IF con. Ver.x. xxx
SYScon. Ver.x. xx (xxxx)

Model LBT-ZX10D
Region 0x
Config xxxxxxxx
Front End Ver.x.xx

TEL
TEL
Exit: RETURN
13942296513
13942296513
IF con. : The version of master controller (IC401).
SYScon. : The version of DVD system processor (IC207).
Front End : The version of mechanism controller (IC901).
7. Video Level Adjustment

On the Test Mode Menu screen, selecting [7] displays color bars for
video level adjustment. During display of color bars, OSD disappears
but the menu screen will be restored if pressing the [RETURN] key.
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

26
HCD-ZX10D
SECTION 5 SECTION 6
QQ 376315150 892498299
MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS
PRECAUTION
DECK SECTION 0 dB=0.775 V
1. Clean the following parts with a denatured alcohol-moistened
swab: 1. Demagnetize the record/playback head with a head
record/playback heads pinch rollers demagnetizer.
erase head rubber belts 2. Do not use a magnetized screwdriver for the adjustments.
capstan idlers 3. After the adjustments, apply suitable locking compound to the
2. Demagnetize the record/playback head with the a head parts adjust.
demagnetizer. 4. The adjustments should be performed with the rated power
3. Do not use a magnetized screwdriver for the adjustments. supply voltage unless otherwise noted.
4. After the adjustments, apply suitable locking compound to the 5. The adjustments should be performed in the order given in this
parts adjusted. service manual. (As a general rule, playback circuit adjustment
5. The adjustments should be performed with the rated power should be completed before performing recording circuit
supply voltage unless otherwise noted. adjustment.)
6. The adjustments should be performed for both L-CH and R-
TORQUE MEASUREMENT CH.
Mode Torque meter Meter reading 7. Switches and controls should be set as follows unless otherwise
specified.
TEL
TEL
3.06 N • m to 6.96 N • m
FWD CQ-102C 31 to 71 g • cm
• Test Tape
(0.43 – 0.98 oz • inch)
13942296513
13942296513
0.19 N • m to 0.58 N • m Tape Signal Used for
FWD
CQ-102C 2 to 6 g • cm P-4-A063 6.3 kHz, –10 dB Azimuth Adjustment
back tension
(0.02 – 0.08 oz • inch)
3.06 N • m to 6.96 N • m
REV CQ-102RC 31 to 71 g • cm RECORD/PLAYBACK HEAD AZIMUTH ADJUST-
(0.43 – 0.98 oz • inch) MENT
0.19 N • m to 0.58 N • m DECK A DECK B
REV
CQ-102RC 2 to 6 g • cm
back tension Note: Perform this adjustments for both decks
(0.02 – 0.08 oz • inch)
QQ
QQ
Procedure:
6.96 N • m to 14.02 N • m
TEL 13942296513 QQ 376315150 892498299

1. Mode: Playback
FF/REW CQ-201B 71 to 143 g • cm
(0.98 – 1.99 oz • inch) test tape MAIN board
376315150 892498299
376315150 892498299
P-4-A063 IC101
9.80 N • m (6.3 kHz, –10 dB) Pin wk (L-CH)
FWD tension CQ-403A 100 g or more Pin ej (R-CH) level meter
(3.53 oz or more)
9.80 N • m set
+
REV tension CQ-403R 100 g or more –
(3.53 oz or more) MAIN board
IC101
Pin eh (GND)

27
HCD-ZX10D
QQ 376315150 892498299
2. Turn the adjustment screw and check output peaks. If the peaks
do not match for L-CH and R-CH, turn the adjustment screw
so that outputs match within 1dB of peak.
DVD SECTION
About the dicision to pass or fail of the optical pick-up block, refer
to “DICISION TO PASS OR FAIL OF THE OPTICAL PICK-UP
BLOCK” (Refer to page 6 in SERVICING NOTES)
within • Precaution
L-CH 1dB 1. DVD block is basically designed to operate without
peak adjustment. Therefore, check each item in order given.
within
Output 1dB 2. Use DVD reference disc unless othermise indicated.
level
[DVD reference disc]
TDV-520CSO (DVD-SL) : PART No. J-2501-236-A
R-CH LUV-P01 (CD) : PART No. 4-999-032-01
peak TDV-540C (DVD-DL) : PART No. J-2501-235-A
Screw Screw
position L-CH R-CH position Note: Do not use exiting test disc for DVD.
peak peak 3. Use an oscilloscope with more than 10MW impedance.
4. Clean the object lens by an applicator with neutral detergent
TEL
TEL
3. Mode: Playback when the signal level is low than specified value with the
following checks.
test tape
P-4-A063 AUTO SERVO ADJUSTMENT
13942296513
13942296513
(6.3 kHz, –10 dB) oscilloscope
pin wk After parts related to the servo circuit (RF amplifier (IC001), DSP
L-CH
pin eh
(IC509), motor driver (IC501), EEPROM (IC903) so on) are
MAIN L replaced, re-adjusting the servo circuit is necessary. Select “ALL”
V H
board at “1. Drive Auto Adjustment” (Refer to page 19 in TEST MODE)
IC101 R and adjust DVD-SL (single layer), CD and DVD-DL (dual layer).
R-CH
VIDEO LEVEL CHECK
pin ej
Purpose:
This adjustment is made to satisfy the NTSC standard, and if not
waveform of oscilloscope
QQ
QQ
adjusted correctly, the brightness will be too large or small.
TEL 13942296513
in phase 45 ° 90 ° 135 ° 180 ° QQ 376315150 892498299
376315150 892498299
376315150 892498299
Oscilloscope
good wrong
75 Ω
4. After the adjustments, apply suitable locking compound to the set
pats adjusted.
Adjustment Location: Playback Head (Deck A). VIDEO board

Record/Playback/Erase Head (Deck B). VIDEO OUT jack (J1201)
Procedure:
1. Connect an oscilloscope to VIDOE OUT jack (J1201) on the
VIDEO board.
2. Load a DVD reference disc playback.
3. Check the video signal level is 1.00 ± 0.05 Vp-p.
1.00 ± 0.05 Vp-p
(WHITE 100%)
forward reverse

28
HCD-ZX10D
SECTION 7
QQ 3 7 6 3 1 5 1 5 0
DIAGRAMS
7-1. BLOCK DIAGRAM – RF SERVO SECTION –
8 9 2 4 9 8 2 9 9 117 RFIN
44, 41, 39, 35,

HDB0 – HDB7
32, 30, 27, 24

8 SD0 – SD7
A
(Page 30)
RF
1 DVDRFP ATOP 62 59 AIP FNP 53 54 DIP RFAC 57 50 RFAC PCMD 66 160 MDAT
63 RFSIN ATON 61 60 AIN FNN 52 55 DIN
A
3 A2
B SDEF, XSAK,
DETECTOR 4 B2
C VC 20 VC BCK BCK SDEF XDCK, XSRQ
D
5 C2 BCK 67
LRCK LRCK
158 BCLK HDB8 26
XSAK
B
6 D2 LRCK 65 163 LRCK HDRQ 46 (Page 30)
COMPARATOR C2PO C2PO XDCK
D
C
B
A
C2PO 14 155 C2PO XHWR 48
F MEVO 32 IC003 GSCOR GSCOR XSRQ
18 CD_E WDCK 17 146 GSCOR XHAC 53
E DFCT DFCT
17 CD_F MIN 31 DFCT 11 145 DFCT
WFCK WFCK
WFCK 10 151 WFCK
B AVC SBSO SBSO
TEL
TEL
12 A SBSO 79 X902 148 SBIN
A (1.65V) EXCK EXCK
11 B EXCK 80 27MHz 147 EXCK
D SCOR SCOR
10 C 150 SCOR
C CD/DVD RF AMP,
9 D V125 36 38 VC
OPTICAL TRAVERSE FOCUS/TRACKING ERROR AMP
42 CE 7 8
13942296513
13942296513
UNIT B IC001
16 CD_A DVD DECODER
XTI
XTO
(DBU-3) A CD DECODER,
15 CD_B DIGITAL SERVO PROCESSOR CLOCK IC701
D IC509 GENERATOR
14 CD_C
MO1
SO3
SO2
C IC906
13 CD_D 167 XTAL
13 3 10 169 XTL2
DATA RF
SDATA 47
LASER AUTOMATIC POWER CLK RF
CD LD SCLK 46 XTAI 71 170 XTL1
DIODE CONTROL (FOR CD) 22 CDLD SDEN
(FOR CD) Q002 SDEN 48
TE BUFFER
TE 39 MDP 25 137 MDIN2
FE IC703 (2/2)
PD 24 CDPD FE 40 135 SPO
66 – 69, 71, 73 – 75, 96, 97,

PI/CE
99, 101, 102, 104 – 106

PI 38
QQ
QQ
23 DVDPD
41 – 44, 46 – 49
MDB0 – MDB9,
MDBA – MDBF
2 – 5, 7 – 10,
QQ
MIRR
I/O0 – I/O15
TEL
172 – 176, 1, 2, 4
MIRR 27
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
LASER AUTOMATIC POWER TE SCOR 15 26 SCOR
DVD LD 41 TE
D0 – D7
D0 – D7
14 – 21
DIODE CONTROL (FOR DVD) 21 DVDLD
LDON 26 40 SE
376315150 892498299
376315150 892498299
(FOR DVD) Q001 FE XTSL 69 10 CDSP2
39 FE
PI/CE
43 RFDC DOCTRL/
MD2 63 3
16Mbit
ISBTEST
D-RAM
5, 7, 9 – 14
INLIM 26 SSTP
A0 – A7
A0 – A7
89 – 96
XRST 2 98 XDRST IC706
79, 80, 82 – 87,

MA0 – MA9
LASER DIODE
21 – 24,
A0 – A9
27 – 32
89, 91
SW SELECT SWITCH
Q901 DATA 4 49 DATA_CD
XRD 85 17 XRD
CLOK 6 50 CLOK_CD
XWR 84 18 XWR
FOCUS/TRACKING COIL DRIVER, XLAT 5 27 LAT_CD
XCS_DVD 12 19 XCS
SPINDLE/SLED MOTOR DRIVER SENS 7 9 SENS_CD
IC501 INT0_DVD 22 20 XINT0 XMWR 76 17 WE
SQSO 76 52 SQSO
INT1_DVD 23 21 XINT1 XOE 94 33 OE
SQCK 77 54 SQCK
XRAS 78 18 RAS
FCS+ FF FF
36 FOCUS COIL 48 33 FFDR GFS_DVD 58 107 GFS XCAS 95 34 UCAS
2AXIS FCS– FR FR
DEVICE 37 DRIVE 1 34 FRDR 35 LCAS
TF LOCK 24 75 LOCK_CD
FOCUS/ 76 28 31 31 TFDR XRST_1882 25 164 XRST
TRACKING TRK+ TF TR GFS 13 71 GFS_CD
34 3 32 TRDR
LDSEL
LDON
INLIM
TRACKING COIL
TRK– TR FF MUTE 3 59 MUTE_CD
MNT1
COIL
APE0
35 DRIVE 4 7 FCS_JMP_1
FR
8 FCS_JMP_2
SLEDA+
32 SLED MOTOR 109 92
SLEDA– 7 44 SLED_B COUT 19 30 COUT_CD
31 DRIVE
SLED M SLEDB+
30
SCLK 8 72 SCLK_CD
SLEDB– SLED MOTOR AMP 29 SFDR FOK 22 74 FOK_CD 27M
29
DRIVE
10 43 SLED_A SLED 61
IC503 30 SRDR MIRR 20 29 MIRR C
SPDL+ (Page 30)
27 SPINDLE MOTOR SCK_DSD 45
13
28 DRIVE
SPINDLE M MIRR
JIT 64
COMPARATOR
SPDL– IC703 (1/2)
47
DATA RF
CLKRF
SDEN
TE
FE
PI/CE
BUFFER 45 62 FG X901
46 20MHz
MNT1 6
MUTE12 19 60 MUTE_2D
MUTE34 20
83 82 2 65 67 66 40 41
MUTE5 21 63 SP_ON EEPROM • SIGNAL PATH
SDATA_RF
SDCLK_RF
SDEN
TE
FE
PI
XTAL
EXTAL
TSD-M 22 73 TDS-M IC903
m
: AUDIO
www
POWER SAVE 39 97 DSAVE
MECHANISM CONTROLLER SDA_EEP 5 5 SDA : VIDEO
x ia o y u 1 6 3 c o
IC901 (1/2) SCL_EEP 100 6 SCL
WP_EEP 99 7 WP : CD PLAY
: DVD PLAY
. .
HCD-ZX10D
29 29
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-2. BLOCK DIAGRAM – VIDEO/CHANGER SECTION –
8 9 2 4 9 8 2 9 9
XCK
BCK
LRCK
SDDATA0 – SDDATA7
DML, DMR, FL, FR, SL, SR, C, SW
177 –174, 171 –168

DML
DATA0 (DM) 150 31 DATA4 VOUT8 20 F
SD0 – SD7 8 8 DMR
SD0 DATA1 (FLR) 151 45 DATA1 VOUT7 16 (Page 32)
A SD1 • SIGNAL PATH
DATA (SLR) 154 46 DATA2 FL
(Page 29) SD2 VOUT1 14
DATA (CSW) 155 47 DATA3 FR
: AUDIO
SD3
LATCH VOUT2 13
SD4 IC256 : VIDEO
SD5 XCK 147 38 SCKI SL
VOUT3 12
SD6 BCK 149 40 BCK :Y
SR
SD7 LRCK 148 41 LRCK VOUT4 11
: CHROMA
C
SDEF, XSAK, MDI 113 34 MDI VOUT5 10 : COMPONENT VIDEO
XDCK, XSRQ SDEF MC 114 35 MC
B XDCK LATCH
182 SDERROR
ML 115 36 ML VOUT6 9
SW
: GAME INPUT (VIDEO)
(Page 29) 183 SDCLK
XSAK IC258
179 SDEN
D/A CONVERTER
XSRQ IC302
178 SDREQ
D3V 192 INT/EXT J850 (1/2)
TEL
TEL
GAME INPUT
VIDEO VIDEO SWITCH, 75Ω DRIVER
VIDEO AMP, 75Ω DRIVER IC1200
IC1201
13942296513
13942296513
3 VIN2
LATCH
J1201
IC259 VDAC_0 131 4 CVBSIN CVBSOUT 23 1 VIN1 VOUT 7
ADC_DATA, BCK, VIDEO OUT
SW1
LRCK, XCK ADC_DATA
D BCK
(Page 32) 2
LRCK
C Y
Q201 VDAC_1 128 2 CIN C OUT 26 J1202
LRCK
S-DCOUT 27 S VIDEO OUT

BCK
XCK VDAC_2 125 6 YIN YOUT 21
27M
C 139 XIN
QQ
QQ
10 CYIN CYOUT 20 Y
QQ
(Page 29)
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
J1200
MASTER CONTROLLER COMPONENT
VDAC_3 122 12 CBIN CBOUT 18 PB/CB
IC401 (1/5)
376315150 892498299
376315150 892498299
LOADING MOTOR DRIVE VIDEO OUT
MUTE1
MUTE2
IC515 VDAC_4 119 14 CRIN CROUT 16 PR/CR
I/P
S1
M001 4 OUT1 FIN 7 50 LOD-POS
(LOADING)
M 2 OUT2 FIN 9 49 LOD-NEG
3 13 25 9
INTERLACE/PROGRESSIVE
SELECT SWITCH
VMUTE2 35 Q1200
TABLE MOTOR DRIVE
VMUTE 36
IC514
VIDEO OUT 70
M002 4 OUT1 FIN 7 48 TBL-POS
(TABLE)
M 2 OUT2 FIN 9 47 TBL-NEG 107 108
MREQ 38 110 MREQ
VS
I/P SW
DISC IN SYS RST 37 202 RESET
LEVEL SHIFT
DETECT SENSOR 43 DSENS DVD SYSTEM PROCESSOR
CS (ZIVA_E2P)
Q870
WRITE_CTRL
PH101 IC207
(ZIVA_E2P)
WEH.UDS
RST_SPC
DRVRDY
DRVCLK
I2C_DA
DRVRX
I2C_CL
HREAD
DRVTX
HIRQ1
HIRQ2
MRAS
MCAS
MCLK
MCS0
HCS0
MWE
BA0
BA1
ALE
TABLE SENSOR MD0 – MD31
42 TSENS HAD0 – HAD15 HA1 – HA3 MA0 – MA11 MDQM0 – MDQM3
PH102 57 – 60, 64 – 71, 75 – 78,
161 160 186 187 185 184 188 116 165 162 191 22, 19 – 14, 11 – 3 2, 207, 206 190 195 27 25 42 – 33, 45, 46 62, 73, 86, 97 48 47 56 49 53 51 52
81 – 84, 88 – 95, 99 – 102
WE
OE
CE
CHUCKING DETECT, S002 45 CHK-SW HAD0 – HAD15 HA1 – HA3
TRAY OPEN/CLOSE DETECT ROTARY ENCODER 44 OC-SW1
DATA & ADDRESS BUS

S001
(TRAY OPEN/CLOSE DETECT) 2,4,5,7,8,10,11,13,74,76,77,79, 25 – 27,
46 OC-SW2 82,83,85,31,33,34,36,37,39,40, 60 – 66, 24, 21 16, 71, 28, 59 22 23 68 20 17 19 18
OPEN HAD0 – HAD15 HA1 – HA2 42,45,47,48,50,51,53,54,56 DQM0 – DQM3
BS0
BS1
CLK
CS
WE
RAS
CAS
A0 – A9,
1 8 3 DQ0 – DQ31
CLOSE A10/AP, NC
ADDRESS LATCH
R/B
WC
CS
IC231 – 233 128Mbit SD-RAM

I2C DATA, I2C CLK I2C DATA 6 DO BUFFER IC203
E I2C CLK
SWITCH
5 DI EEPROM Q202
IC111 IC204
(Page 34) 4 SK
ADDRESS BUS
DATA & ADDRESS BUS
HA4 – HA22
D+3.3V
www m
SWITCHING SWITCHING
IC904 IC902 HAD0 – HAD15 HA1 – HA3
CE
OE
x ia o y u 1 6 3 c o WE
22 – 18, 8 – 1,48,
78 79 34 33 35 36 37 32 38 29 – 36, 38 – 45 25 – 23 26 28 11
17, 16, 9, 10, 13
. .
CS_ZIVA
RST
CE
OE
WE
DQ0 – DQ15 A0 – A2
I2C_SIO
I2C_SCL
SO_ZIVA
SI_ZIVA
SCK_ZIVA
DRVIRQ
DRVRDY
A3 – A21
MECHANISM CONTROLLER
IC901 (2/2)
PROGRAM ROM
IC205
HCD-ZX10D
30 30
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-3. BLOCK DIAGRAM – TUNER/TAPE SECTION –
FM75Ω
(COAXIAL)
ANTENNA
FM ANT
TUNER UNIT
ST-L
8 9 2 4 9 8 2 9 9 ST-L
G
ST-R R-CH
(Page 32)
AM AM ANT ST-DOUT/MC-DIN 83 ST-DIN

ST-DIN/MC-DOUT 84 ST-DOUT
ST-CLK 82 ST-CLK
ST-CE 85 ST-CE
ST-MUTE 88 ST-MUTE
TUNED 86 TUNED
STEREO 87 STEREO
DECK A/B SELECT SWITCH,

REC/PB EQ AMP
IC101 (1/2)
L-CH 75 PB-L
HP101 76
78 79 80 H
R-CH
TEL
TEL
(PB) (Page 32)
(DECK-A) MUTING CONTROL
MUTING
SWITCH 63 TC-MUTE
R-CH R-CH Q180
Q537, 538
13942296513
13942296513
AMS DETECT
11 61 AMS-IN
Q190, 198, 199
L-CH 10
R-CH AMS
9
MUTING CONTROL AMS MUTING
MUTING 8 39 AMS MUTE
SWITCH Q528 –530
Q103
Q106, 107
R-CH R-CH
REC-L
17 EQ 15 J
R-CH (Page 32)
MUTING CONTROL
HRPE101 MUTING MUTING
SWITCH 59 TC-RELAY
(REC/PB/ERASE) Q116 Q112, 114
Q108 – 110
(DECK-B)
R-CH
QQ
QQ
MUTING CONTROL
TEL QQ
SWITCH 32 REC MUTE
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
Q539, 540
T101
376315150 892498299
376315150 892498299
BIAS OSC
REC BIAS MASTER CONTROLLER
SWITCH +9V IC401 (2/5)
ERASE Q104, 105
BIAS OSC
60 BIAS
Q101
TAPE MECHANISM
DECK BLOCK
• R-ch is omitted due to same as L-ch. APLAY 51 A-PLAY
• SIGNAL PATH BPLAY 56 B-PLAY
: TUNER (FM/AM) AHALF 53 A-HALF
BHALF 91 B-HALF
: TAPE PLAY (DECK-A) ASHUT 89 A-SHUT
BSHUT 90 B-SHUT
: TAPE PLAY (DECK-B)
REC (FWD) 55 REC-A
: REC REC (REV) 58 REC-B
ATRGM+ TRIGGER PLUNGER

DRIVE (DECK-A) 52 A-TRG
Q191, 192
(DECK-A)
BTRGM+ TRIGGER PLUNGER

DRIVE (DECK-B) 57 B-TRG
Q195, 196
(DECK-B)
CAPM+ CAPSTAN/REEL
M MOTOR DRIVE 54 CPM-CNT2
Q193, 194
(CAPSTAN/REEL)
www . x ia o y u 1 6 3 . c o m
HCD-ZX10D
31 31
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-4. BLOCK DIAGRAM – AUDIO SECTION –
8 9 2 4 9 8 2 9 9 R-CH
J701 (2/2)
R
VIDEO/SAT
OUT
REC-L
J
(Page 31)
ADC_DATA, BCK,
ADC_DATA LRCK, XCK
1 VINL DOUT 15 D
BCK
BCK 14 (Page 30)
LRCK
R-CH 5 VINR LRCK 13 FEED BACK
J701 (1/2) J850 (2/2) SYSCLK 16
XCK K
R-CH (Page 33)
PHONO AMP
L L
IC519 GAME INPUT A/D CONVERTER FEED BACK MUTING
PHONO IN
AUDIO IC352 SWITCH Q290
R R-CH R R-CH Q145
6 13 14
L INPUT SELECT SWITCH,TONE CONTROL,
VIDEO/SAT 25 MUTING CONTROL
ELECTRICAL VOLUME, BASS BOOST AMP
IN 26 SWITCH
R R-CH IC101 (2/2)
3 27 Q292, 293
SELECTOR
4
TEL
TEL
ST-L BASS
G 2 + 23 24
BOOST
28
(Page 31) 1
5
PB-L R-CH + TONE
+
H R-CH 31 30 29
13942296513
13942296513
(Page 31) R-CH
I/F
J801 MCU
MIC 1
59 56 53 35 34
SPEANA
RV801 L
MIC LEVEL • R-ch is omitted due to same as L-ch. (Page 34)
• SIGNAL PATH
J802 MIC AMP MIC AMP
MIC 2
+ IC850 (1/2) IC850 (1/2) : AUDIO
QQ
QQ
: TUNER (FM/AM)
QQ
DIGITAL ECHO
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
IC851 : TAPE PLAY
RV802
: REC
376315150 892498299
376315150 892498299
ECHO LEVEL
: VIDEO/SAT OUT
DML, DMR, FL, FR,
SL, SR, C, SW DML : VIDEO/SAT IN
F 37 38
(Page 30) : PHONO IN
DMR
40 39 R-CH
: MIC INPUT
FL
41 34
: GAME INPUT (AUDIO)
FR
2
32 R-CH FL FL, FR, RL, RR, C
MUTING MUTING MUTING MUTING 33 ELECTRICAL VOLUME
M
Q205 Q206 Q207 Q208 IC501 FR (Page 33)
R-CH
SL FEED BACK
6 5 4
31 SWITCH MUTING
3 30 Q200 Q523, 524
RL
29
SR FEED BACK
10 9 8
28 SWITCH
R-CH 7 27 Q201
RR
C 26
13 12
C
15 11 25 J202
SUBWOFFER OUT
SW AUTO GAIN
14 + CONTROL
24 23 22
MUTING MUTING MUTING MUTING I/F MUTING MUTING MUTING MUTING

Q209 Q210 Q211 Q212 Q203 Q204 Q202 Q270
17 18
www m
67 68 65 66
MUTING CONTROL MUTING CONTROL MUTING CONTROL
AUDIO2-DATA
AUDIO2-CLK
AUDIO1-DATA
AUDIO1-CLK
95 MIC DET SWITCH SWITCH SWITCH
Q533, 534 Q531 Q532
MUTING CONTROL
. .
SWITCH
Q535, 536 LINE MUTE 34
A+9V
SW MUTE 31
MASTER CONTROLLER
41 CD-A-MUTE IC401 (3/5) ANALOG_IN_MUTE 69
HCD-ZX10D
32 32
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-5. BLOCK DIAGRAM – AMP SECTION –
K
FEED BACK
(Page 32)
D624
+
8 9 2 4 9 8 2 9 9 J851
PHONES
MUTING
Q640, 641
MUTING CONTROL
SWITCH
Q634, 635
POWER AMP
IC600
FL, FR, RL, RR, C –1 TM608 (1/2)

FL
M 18 11
+
(Page 32) D654 L
+ –
+ FRONT
FR –2 –
14 8 D655 R
+
TEL
TEL
12 PROTECT
OVER LOAD RELAY DRIVE AC CUT DETECT
DETECT TH630
RY646
Q644
SWITCH N
Q647
Q618, 668 (Page 34)
STANDBY M501
SWITCH (FAN)
13942296513
13942296513
Q604, 606, 610 FAN MOTOR DRIVE
THERMAL FAN MOTOR
DETECT SWITCH Q553, 555, 557
M
Q628, 630 Q629
OVER LOAD
DETECT
Q648 • SIGNAL PATH
OVER CURRENT PROTECTOR
IC627 : AUDIO
4 DC DET 2
OVER
3 1
QQ
QQ
LOAD
D627
TEL 1 3 9 4 2 2 9 6 5 1 3 D760
QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
OVER LOAD OVER LOAD
DETECT DETECT
POWER AMP Q730, 780 Q770
IC701
–1 TM608 (2/2)
SL
18 11
+
L
+ –
SURR
SR –2 –
14 8 R
+
PROTECT
RELAY DRIVE
RY760 SWITCH
Q762
Q765
C
19 21
+
CENTER
12
RY761
RELAY DRIVE
PROTECT
SWITCH
–
Q763
Q764
STANDBY
SWITCH AC CUT
Iranian,
Q720 – 722 DETECT
Singapore,
Malaysia Q402
81 80 71 72 78 33 79 77
PROTECT
STK MUTE
C-RELAY
REAR RELAY
FR RELAY
AC CUT MAIN
HP MUTE
HP DET
MASTER CONTROLLER
IC401 (4/5)
HCD-ZX10D
33 33
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-6. BLOCK DIAGRAM – PANEL/POWER SUPPLY SECTION –
8 9 2 4 9 8 2 9 9 D660
D661
T1100
POWER
TRANSFORMER
AC CUT DETECT
N
(Page 33)
F1161 VL
+VL RECT
VL
–VL D658
F1171
F1141 VH
+VH RECT
+4.5V VH
–VH D656
+4.5V REGULATOR F1151
Q563
+9V
SPEANA A+9V REGULATOR
L 1 IN1 BUF1OUT 3 4 BPF2IN1
BPF2OUT 15
BPF1 IC511
(Page 32) 5 BPF2IN2
6 BPF3IN1 BPF2
BPF3OUT 14 +9V
7 BPF3IN2 M+9V,
REGULATOR
8 BPF4IN1 BPF3 LED+9V
BPF4OUT 13 IC510
9 BPF4IN2 FAN VCC
BUF2OUT 20 19 BPF1IN1 BPF4 F1181 AC3
TEL
TEL
BPF1OUT 16 +12V
18 BPF1IN2 RECT
M+12V REGULATOR AC3
D501
IC516
D329
BAND-PASS FILTER REC
2 IN2 RECOUT 17
IC903
13942296513
13942296513
+1.8V
D+1.8V REGULATOR
DISPLAY CONTROLLER IC211
IC901 +3.3V
B+ SWITCH D+3.3V REGULATOR
BPF1 VL+9V LED+9V IC518
BPF1-F01 70 Q906
BPF2
S1EG1 – SEG36
5 – 10, 12– 22,
BPF2-F02 71
24 – 41, 43
BPF3
BPF3-F03 72
BPF4
BPF4-F04 73 B+ SWITCH +3.3V
VH+9V
Q909 A+3.3V-1 REGULATOR
REC IC502
ALL BAND 74
LED POWER
G14, G17
FL901
91, 88
GRID DRIVE SELECT SWITCH

QQ
QQ
FLUORESCENT Q905 +3.3V
Q901, 902
INDICATOR TUBE
QQ
A+3.3V-2 REGULATOR
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
IC907
4 – 1, 100 – 92,
G1 – G13, G15,
LED POWER +5V

G16, G18, G19
90, 89, 87 86
376315150 892498299
376315150 892498299
LED SELECT 59 SELECT SWITCH D+5V REGULATOR
Q903 IC517
TAPE A LED, CD/DVD POWER
SPK MODE LED, ON/OFF SWITCH
CD LED, Q506, 509
44 – 47, 52 – 58
GAME, REC LED, +3.3V

KEY 0 – KEY 5
VOL 1, 2, D906 –919, DAC+3.3V REGULATOR

S900 – 927, S931 – 945, LED DRIVE
64 – 69
VOL 3, 4, D921 – 924, IC392

S947 – 956, S958 – 967, S970 Q907 – 917
VOL 5, 6, D926, 929 F1191 AC4
(FRONT PANEL KEY) VOL 7, 8, +5V
AUDIO+5V, B+ SWITCH RECT
VOL 9, 10, REGULATOR AC4
ZIVA+5V Q552, 554 D502
VOL 11, TUNER BAND, IC513
ROTARY TAPE B LED CD-POWER/
75 JOG A 40
JOG ENCODER 97 BPM-DET-LO DVD POWER
S957 76 JOG B
OVER VOLTAGE
I2C-DAT 60 30 IIC-DATA I-HOLD 94 DETECT
I2C-CLK 61 29 IIC-CLK Q590
ROTARY 80 VOL A D1192
VOLUME ENCODER RESET 77 75 GC RESET –33V VP
VP
S975 79 VOL B REGULATOR
(Iranian, Singapore, Malaysia) (–33V)
S929 Q664 (Iranian, Singapore, Malaysia)
XOUT
MASTER CONTROLLER
XIN
I/1 IC401 (5/5)

TO FLUORESCENT VF VOLTAGE
83 82 VF1
LED DRIVE D920 INDICATOR TUBE VF SELECTOR
74 POWER-KEY STBY LED 76 (STANDBY) FL901 VF2 S1000
Q900
S928
X601 (AC IN)
4MHz DISPLAY SWITCHING
EVER+4V
AC-CUT 20 POWER
I2C DATA, I2C CLK I2C DATA (Australian)
E I2C CLK
73 DISPLAY-KEY RESET VOLTAGE D406
RESET 12 SWITCH DETECT RY1000
(Page 30)
Q401 IC402
REMOTE CONTROL POWER ON/OFF
RECEIVER 4 SIRCS STBY RELAY 28 RELAY DRIVE
IC902 Q1000
XC-OUT
X-OUT
XC-IN
X-IN
15 13 10 11
www m
X402 X401
16MHz 32.768kHz
. .
HCD-ZX10D
34 34
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
• Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location
Note on Printed Wiring Board:

• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
•
•
f : internal component.
: Pattern from the side which enables seeing.
Note on Schematic Diagram.
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
8 9 2 4 9 8 2 9 9
TRANS board
VOLTAGE SELECTOR board
TUNER UNIT
(The other layers' patterns are not indicated.) specified.
• f : internal component. VIDEO board
Caution: • 2 : nonflammable resistor.
Pattern face side: Parts on the pattern face side seen from • 5 : fusible resistor.
(Conductor Side) the pattern face are indicated. • C : panel designation.
Parts face side: Parts on the parts face side seen from Note: The components identified by mark 0 or dotted
(Component Side) the parts face are indicated. line with mark 0 are critical for safety. MAIN board
Replace only with part number specified.
• DMB07 board is multi-layer printed board.
However, the patterns of intermediate-layer have not been • A : B+ Line.
included in diagram. • B : B– Line. SENSOR board
• Indication of transistor. • Voltages and waveforms are dc with respect to ground un- SURROUND board
der no-signal (detuned) conditions.
– RF/DMB07/VIDEO Boards –
C
TEL
TEL
no mark : DVD PLAY
Q These are omitted. * : Impossible to measure SWITCHING POWER
B E – Other Boards –
no mark : TUNER (FM/AM)
13942296513
13942296513
( ) : DVD PLAY
〈〈 〉〉 : TAPE PLAY (DECK-A)
Q { } : TAPE PLAY (DECK-B)
[ ] : REC DMB07 board
B C E * : Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 MΩ).
These are omitted. Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope. POWER board
Voltage variations may be noted due to normal production
tolerances.
QQ
QQ
• Circled numbers refer to waveforms.
TEL QQ
• Signal path.
1 3 9 4 2 2 9 6 5 1 3 F : AUDIO
3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
L : VIDEO
E :Y
a : CHROMA PANEL board CURSOR board
r : COMPONENT VIDEO
J : CD PLAY FUNCTION SW board
c : DVD PLAY
f : TUNER (FM/AM)
j : TAPE PLAY (DECK-A) POWER SW board
d : TAPE PLAY (DECK-B)
G : REC
h : TV/SAT OUT
k : TV/SAT IN
q : PHONO IN
TC-A board
N : MIC INPUT
g : GAME INPUT (AUDIO) RF board
p : GAME INPUT (VIDEO)
• Abbreviation MIC board
AUS : Australian model
E15 : Iranian model
SP : Singapore model
MY : Malaysia model VOL board
TC-B board
CD-L board
SE-130 board
MD-94 board
www m
JOG board
GAME/HP board
CD-R board
. .
HCD-ZX10D
35 35
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-7. PRINTED WIRING BOARD – RF BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4 5 6 7 8 8 9 2 4 9 8 2 9 9
9 10 11 12 13
RF BOARD (COMPONENT SIDE) RF BOARD (CONDUCTOR SIDE)

A R041
C003
Q002 C001
R009 B
R008 C
OPTICAL
E TRAVERSE
B R007 UNIT
L002
C011
C010
R005 B D002
(DBU-3) C005
C
R003
E C004
Q001 L001
TEL
TEL
R004
D001
C002
R010
R006
CN001 C006
C025
C
13942296513
13942296513
R025
R024
R022 C030
C008 C026
C009 C024 C029 C031
R023
R027
C028 C027 C019 64 49 R026
R091 C020 R028
C021 C018 R029
C052
C013 C017 C016 1 48
C032
C022
D
C015
C014
R033 C038 R001
R014 C023
C049 1 5 C039 C041 C042 IC001 R031
IC003 3
C037
R012 R013
A 4 C034
QQ
QQ
R018 CN003 R011 C033 C012
R046
QQ
16 33
TEL
R016
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
DMB07 BOARD R047 R017
R034
CN501 R021 R015 C036
17 32 C035
376315150 892498299
376315150 892498299
(Page 38)
C050
C040 C051
E
R035
R019
R020
CN002
F 12 12
1-684-822- (12) 1-684-822- (12)
• Semiconductor
Location
Ref. No. Location
D001 C-10
D002 B-10
IC001 D-11
IC003 D-3
Q001 B-3
www m
Q002 B-3
. x ia o y u 1 6 3 . c o
HCD-ZX10D
36 36
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-8. SCHEMATIC DIAGRAM – RF BOARD – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams.
8 9 2 4 9 8 2 9 9 RFMON
C006
C028 C027 R026 C013
22
0.1 0.1 12k 0.1
10V CN002
29P
C030 0.01
AGND
C025 C026
R023 0.1 0.1 C029 RFAC
820 0.01
C024 C035 AGND
1000p
JL005 0.01 0.1
AVC
R024
AVC
C031
0
JL004 MIRR
MIRR
C018 5600p
PI/CE
C020 22p
C021 22p
C022 22p
C023 22p
PI
CN001 TE
24P TE
D FE
D FE
C
C A5V
JL007 R025
RFP
RF 100 A5V
SDEN
C009 R022 C019
GND 0.1 220 5600p SDEN
RFP R027 0 SDEN DATA_RF
VC DATA_RF
R028 0 DATA_RF CLK_RF
C017
VCC CLK_RF
E A 2200p R029 0 CLK_RF LDON
E LDON
A B C016 2200p
TEL
TEL
A A3V
B C C015 2200p RFMON
B
C032
RFMON (Page 40)
F D C014 2200p 0.047 C033 C012 C005
F 22 INLIM
0.1 0.1
10V
N.C JL006 LDSEL
C042
PD FD-
180p
PD CD/DVD RF AMP, JL003 FD-
13942296513
13942296513
R001 100 R014 0 FE FD+
VR FOCUS/TRACKING ERROR AMP FD+
R013 0 TE TD-
IC001
VCC TD-
R012 0 SP3723CAF0PM R031 100 PI/CE TD+
SW TD+
R011 0 SLB-
LD GND SLEDB-
DVD_LD R018 0 SLB+
DVD LD SLEDB+
R017 0 C049 SLA-
INLIM SLEDA-
0.1
CD_LD R016 0 SLA+
CD LD JL002 SLEDA+
R015 0
INLIM_3V JL001 SPDL-
FD+
FCS+ SPDL+
FD-
FCS-
TD+
TRK+
TD-
TRK-
COMPARATOR
IC003
R041 TL343IDBVR
QQ
QQ
1k
VCC
0.47
TEL QQ
R035 C036
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
0 0.47 R033
C051
E
100k
C039 0.033
C038 0.033
C037 680p
VEE
F
R034 R047
470 33k
376315150 892498299
376315150 892498299
R019 R020 C034
LDON
MIRR
0 0 0.1
C008 C041 R046 C052
3300p
C050
0.1 0.1 10k 0.1
R021 C040 R091

0 0.1 560k
PD
CD_LD
C001 C003
R003 R004 R005 R006 R007 R008 R009 R010
33 33 47k 100 470 33 33 47k 100 470
6.3V 6.3V
IOP2 IOP1
Q001 Q002
2SB1132-T100-QR 2SB1132-T100-QR
AUTOMATIC POWER AUTOMATIC POWER
CONTROL CONTROL
(FOR DVD) (FOR CD)
DVD_LD
CN003
C011
9P
L001 L002 1000p
SLA+
SLEDA+ 47µH 47µH
SLB+ D001 C002 C010 D002 C004
SLEDB+ 10 10
1SS355TE 1000p 1SS355TE
SLB- 16V 16V
SLEDB-
SLA-
SLEDA-
LED {LIMIT-SW(A)}
GND {LIMIT-SW(B)}
INLIM {LIMIT-SW(B)}
SPDL-
SPDL+
www . x ia o y u 1 6 3 . c o m The components identified by mark 0 or dotted

line with mark 0 are critical for safety.
HCD-ZX10D
37 37
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-9. PRINTED WIRING BOARD – DMB07 BOARD (Component Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4 5 6 7 8 9 10
8 9 2 4 9 8 2 9 9
11 12 13 14 15
A C MAIN BOARD
CN404 D VIDEO BOARD
CN1202
(Page 51) (Page 48)
DMB07 BOARD (COMPONENT SIDE)
2 6 2 16
CN101 CN105
1 7 1 17
B C924
Q201
C265
R970 C283
FL205
C355 R327 R296 R197
E
R219
R805 R217
C364 R225
C266
10 1 R202 R263 R264 R265 R266 R267
R198
R226
FL352 R268
IC259 R269
R275
R276
R284
R283
R273
R274
R277
C C287
C279
C241
156 105
C352
TEL
TEL
C366 11 20
R9982
157 104
R9984
R9985
R9983
R234 C242
R254
C356 C357
1
13942296513
13942296513
C1302 C246
D1303
JW801 IC256 C245
C248
D D1304
JW803
R1302
JW802 10 11 R14 R15

FL302
JW804 1
R314
JW805
JW806
20
IC207 C252
C325 C253
R13
21 C239
20 10 11
58 37
1 36 IC258R299 C278
C227
E C261
IC302 R231 R213

208 53
QQ
QQ
12 25 R928 R929 R230
E
C277
C263
C306 FL206
QQ
12 24 C914 C915 1 52
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
X901
C303
MAIN C213
R940
R921
R923
BOARD FL303
IC902
C305
C321 3 C291 X902

376315150 892498299
376315150 892498299
CN503 C215
R942 R943 C907 3 1 FL204
F (Page 51)
C304
R922 2 8 5
R938
C905 C214
R927
9 8
2 • Semiconductor
R931
C302 50 26 1 C258
1 4 5
R936
IC503 C917
R504
D202
Location
C716
C502 1 4
R984
R536
C717
CN107
51 25 R964
5 4 IC211 C568 C916
16 1 IC904C715 C259
8 1
C522
IC906 C711 Ref. No. Location
C518
R995 C567
R707
R998 C702 R708 R710
R716
C706
R712
R994 R997 20 1 R717
R548
R917 IC901 21 80 FL701 R718
D202 F-9
C708
R962 C517 R545
G R988 R719 D901 H-4
C545
C904 FL502 R767
R711
R709
R916 C712 R747 R748
C774
R762 D1303 D-2
C543
R714
R764 C771 132 89
D1304 D-2
R765
C903 R506 R550 R215 R250
76 1 R551
IC509 133 88
R769
R958 C588 R559 C773
R760
R505 R552 R563 IC207 D-13
76 100
R523 R564 R788
R629 R763 IC211 F-9
C590
R978
R586 C544 R758
D901 C901 C569 IC231 I-14
R560
R511 40 61
R907
R906
R905
H C533 C701 IC232 I-14
C733
41 60
R510 IC256 D-11
C531
C927
IC701
R558
C926 C535
C705
C902 R584 R566 R572 10 1 10 1
C925
R568 C552 IC258 E-11
C573
C565
R588
R593
C151 R562
IC259 C-11
R571
R561 C534 C547 R565

FL901 C559 C563 C781
C778 C779 IC231 IC232 IC302 E-3
C560
L103
IC503 G-8
R567
C551
R601
C548
JW392 C101 FL702 C780 IC509 G-9
11 20 11 20
C393 C528 C777
FL101 IC701 H-12
I C392 C530
C558
C553
176 45 C201 C202
FB105 C592 IC901 G-5
R975
R908
C394 FL703
L501 C526 IC902 F-12
R599 1 44
R751 (FOR CHECK) IC904 F-12

C556
C532
IC906 F-11
CN102 C561
CN901
FL501 CN501
Q201 B-11
1 7
J 1-861-848- 12
www m
B MAIN BOARD
A RF BOARD
CN508 CN002
(Page 51) (Page 36)
. .
HCD-ZX10D
38 38
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-10. PRINTED WIRING BOARD – DMB07 BOARD (Conductor Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4 5 6 7 8
8 9 2 4 9 8 2 9 9 9 10 11 12 13 14
A
DMB07 BOARD (CONDUCTOR SIDE)
R282
R281
R280 R279
R278
R293
IC352
R251
1 6
R220 3 4 R329 13 12
R328
R294 IC111 R335 R362
R228
C363
R259
R221
C234
C233
C232
C231
C230
R260
C226 R222 C367
C C238
C276
C274 C368
TEL
TEL
24 1
C237 C229 C236 C365
R1000
C250
C249 R271
R272
44 43
R261 C244
R290
R352
R353
R240 Q202
13942296513
13942296513
C247
R253
E
R369
R368
D C243 1 8
R9998
R9999
C326
C204 C251
R301 IC203 R12 IC204 4 5 R9980

R9981
R227
C240 R248 C256 R313
R310
R311
R312
R241 C257 R270
R246
C235
R11 R10
R292
C260
C290
R245
R257
R244
C218 C216
E R291
R255
C280
C270
C282 R308 C308

86 1 C220
C267 C262
R247 C309
C254 C271 C269 C268 R309
QQ
QQ
C281 C307
C255 R307
TEL QQ
C324 C322
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
C272 R232 R306
FL203 C323 R303

376315150 892498299
376315150 892498299
FL903 R305
F R935
R304
R933 R930
• Semiconductor FB902
R926
R302
R932 C910
Location C264 23
FB903 C501 R904 R925
R990
22 L901
R920
Ref. No. Location R996
R537 R503 C913
C703
R699 4 1
R700
D392 J-13 IC205 C723
C722 C718 R715
R725 C728 R694
IC903 C908
R713
D393 I-14
C752
C709
G
C713
R579
R534
R728
R530
C205 R724 R913
R517
D394 I-14
C714
C508
R727 C721 C918 R915
R726
R720 R524C589
C730 C909
D500 J-10 1 8 R787 R698 R527 5 8
R520
R519
26 25 R721 C782
R529
C514 C509 R918 R902
C720
R573
C726 C775 4 5 R786
IC111 C-10 C906
C512
E
C740
R533 C510 R525 R522 R901 R974
R911
R912
R789
IC203 D-2
C772
C770
IC703 12 1
R521
C506
C928
R580
C519
44 1 R730 C783 R785 R516 Q901
R513 R512
IC204 D-4 13 48 FL908
C503 1
C741
IC205 G-2 H R731

IC706 C769
C729 C570
C504
IC233 I-2 R778 2
C768
IC233 R732 FL706

R799
IC352 C-13
C743 C742
R581
R733 R589
11 10 C525 R515 3
IC392 I-14 R734 C727
C767
IC501 R514 R583
IC501 H-8 R735 C766
R776
L704
C524 R576 IC907
R736 C725
IC502 J-11 R737 R555
C745 C744
D393
IC703 G-6 20 1 R738
1 24 37
50 R777 R750 C765 C734 C776 C529
IC706 H-3 I C203 C724 FL705
R587
R392
D394
IC903 G-10 R744 25 36 1
C275
IC907 H-13 C760 C761 C762 C763 R745 C540 C513
C507
C527 1
IC502 2
R743
R742
R591
R741
C764 C521
Q202 D-4 R746 C515
C516
D500 2
3
Q901 H-11 C511 D392
C523
IC392
3
J
1-861-848- 12
HCD-ZX10D
39 39
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-11. SCHEMATIC DIAGRAM – DMB07 BOARD (1/8) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams.
(1/8)
8 9 2 4 9 8 2 9 9
B1
C518 0.01
FL502
C517 10
B2
C545 C543 C567 C568
10 0.01 0.01 10
C522 R537 B3
0.1 68k
MIRR
COUT
GSCOR
SCOR
C2PO
GFS_CD
WFCK
SCLK
SENS
CLOK
XLAT
DATA
MUTE_CD
XRST_CD
R536
10k
WAVRB
TEL
TEL
GND
AMP
IC503
NJM3404AV(TE2)
VDD
B6
13942296513
13942296513
C592 R548
10k
10
16V
L501
0
C516 R545
0.0022 DFCT 10k EXCK
C501 C502
0.01 0.01
C513 FOK SBSO
10
CN501 C507 R504 LOCK R694
29P
10 47k 10k
SLEDCTRL SQCK
AGND R503
47k
RFAC MDP SQSO
RFAC
R591 C570
AGND 0 10
AVC
R506 C588 C569
AVC
MIRR 47k 0.0022 R550 1k 0.1
R698
MIRR
PI R551 1k 0 768FS
QQ
QQ
PI
TE R505 TFDR C589 0.0022 R552 1k R699
QQ
TE CD DECODER,
TEL
47k 0
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
FE TRDR R559 1k CDSP2
FE DIGITAL SERVO PROCESSOR (Page 41)
FFDR R563 1k IC509
A5V CXD3068Q
FRDR R564 1k BCLK
376315150 892498299
376315150 892498299
C511
A5V 220p
SDEN C590 0.0022 MDAT
SDEN
DATA_RF LRCK
C515 R599
DATA_RF
CLK_RF 220p 1k C544 R629 0
0.1 R573
CLK_RF
LDON 10k MD2
C540
LDON
10
FE
A3V
RFMON FE R560
RFMON
1k
INLIM
(Page 37) INLIM
R558
0.0022
LDSEL
C533
C531
0.047
47k
FCS-
FD-
FCS+
R562
FD+
TRK- TE 1k
D500
TD-
TRK+ TE 1SS355TE
R561 R572
TD+
1k 470k
SLEDB- PI
R566 10k
SLEDB-
SLEDB+ PI R571 C565
SLEDB+
1M 0.1
R565 1k
SLEDA-
SLEDA- R584 B8
33k +3.3V REGULATOR
SLEDA+
SLEDA+ R588 C552 IC502
10k 0 µPC2933T-E2
SPDL-
SPDL-
0.0022
SPDL+ O I
C535
C534 C559
SPDL+ 0.022 0.1 G
100p
R568 1M
R593 C573 R576
100k 100p 0
C553 R567
C563
0.0033 3.3k
C548 C551
0.01 0.47
C560 FL501
0.0015
C558
C547 C561 R601 100 C556 C532 C523 C521 C530
0.1 0.1 0 10 10 0.1 0.1 10
4V
B9
RFAC
LDSEL
R583
RF_AC
0
B10
B11
C10
D1
D2
D3
D4
D5
C2
C3
C4
C5
C1
C7
C8
C9
www m
(Page 42) (Page 43)
. x ia o y u 1 6 3 . c o
HCD-ZX10D
40 40
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-12. SCHEMATIC DIAGRAM – DMB07 BOARD (2/8) – • See page 79 for IC Pin Function Description.
(2/8)
8 9 2 4 9 8 2 9 9
RF_AC
JIT
B1
JITOFF
R787 R786 R785
100k 100k 10k
C782
IC703(2/2) 0.0015
NJM3404AV(TE2)
6
R788 R700 C715 (1/2)
B2 MDIN 7
100k 8.2k 0.0015
5 COMPARATOR
FL706
C783 R789
B3
0.0015 100k
(2/2)
C729 R725 R726
10 BUFFER 1.8k 100k
MDP C701
100 C705 C733 C703
0.01 10 0.1
4V
R748 R724
33k 1k 8 R727
2
3.3k
FL701 1
3
4 IC703(1/2)
R713
C712
C713
C714
100p
R715 C706 C702 C752 C775 R720 R721 C720 NJM3404AV(TE2) R728 C728 C721
10k
0.1
0.1
10k 0.01 10 0.1 0.01 1k 33k 0.1 10k 0.1 0.1
FL705
C708 R710 C711 R712 C716 C717
0.01 10k 0.047 10k 0.47 0.01
R747 33k
GFS_DVD
FL702
R717 R718
MNT1
R708 R709 R711 100k 10k
470k 150k 2.2k
R714
TEL
TEL
R707
R719 1k
R716 100
10k
100
L704 C779
47µH 10
B6
MA9
MA8
BDD
XMOE
BDC
BDB
BDA
BDE
BD9
BD8
BDF
XCAS
C778
C781 0.01
C734 C776 C772 C709
220
10 0.01 0.01 0.1
4V
13942296513
13942296513
R751
0
SPIN
C718
0.01
FL703
BDF
BDE
BDD
BDC
BDB
BDA
BD9
BD8
XCAS
XMOE
MA9
MA8
MA7
MA6
MA5
MA4
C780 C777 C730
10 0.01 0.01
MA7
R765 MA6 C722

22k 0.01
MA5
R767 16Mbit D-RAM
47k
MDIN MA4 IC706
MSM51V1816
MA3 5F-60TSKR1
C723
C774 0.01
MA2
0.0047 R764 C773 R769
1M 0.47 2.2k
GND
I/O15
I/O14
I/O13
I/O12
GND
I/O11
I/O10
I/O9
I/O8
N.C.
N.C.
LCAS
UCAS
OE
A9
A8
A7
A6
A5
A4
GND
MA1
C771 R763
0.047 8.2k
QQ
QQ
(Page 40) MA0
R730 22 RAS
VDD
VDD
VDD
RAS
QQ
I/O0
I/O1
I/O2
I/O3
I/O4
I/O5
I/O6
I/O7
N.C.
N.C.
N.C.
R762 C740
A11
A10
WE
TEL
A0
A1
A2
A3
22k 0.01
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
DFCT R760 0 R731 22 WE
GSCOR BD7
376315150 892498299
376315150 892498299
EXCK R758 0 BD6
SBSO BD5
C741
0.01
SCOR BD4
WFCK
BD3
BD2
R778
100k
BD1
C2PO BD0
DVD DECODER
MA0
MA1
MA2
MA3
RAS
BD0
BD1
BD2
BD3
BD4
BD5
BD6
BD7
R732 10k
WE
IC701 C742
TMC57929PGF-RDP 0.01
B8
BCLK
C727 C724 C725 C726

10 0.01 0.01 0.01
MDAT
R733 10k
R734 10k
LRCK
C743
0.01
R735 10k
R736 10k
R799 C766
0 100p R737 10k
R738 10k
B9
R776 XSRQ
0
R750
10k C744
0.01
D0 R741 22 XSHD
B10
D1 R742 22 XDCK
C745
D2 0.01
D3 R743 22 XSAK
D4
B11
SIGNAL_BUS
R777
0
(Page 44)
XCS1882
R744
XINIT0
XINIT1
XHWR
XHRD
22
SDEF
D5
D6
D7
A0
A1
A2
A3
A4
A5
A6
A7
SD7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
www m
C769 C768 C767 C765 C770 C764 C763 R746 R745 C762 C761 C760
0.01 0.01 0.01 0.01 0.01 0.01 0.01 47k 47k 0.01 0.01 0.01
. x ia o y u 1 6 3 . c o
E1
E2
E3
(Page 43)
HCD-ZX10D
41 41
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-13. SCHEMATIC DIAGRAM – DMB07 BOARD (3/8) –
(Page 40)
8 9 2 4 9 8 2 9 9
C10
C2
C3
C4
C5
C7
C8
C1
C9
(3/8)
D3V
(Page 44)
DSAVE
MUTE_2D
SLED
SPFG
SP_ON
TSD-M
SLEDA
SLEDB
FJMP2
FJMP1
SPIN
D3V
DGND
A3V-2
SLEDCTRL
D5V
(Page 45)
TEL
TEL
C526
C527 22 VGND
0.01
16V
V5V
R589 R581 (Page 45)

13942296513
13942296513
10k 12k
R580
33k
C519
0.01
R368
0
FOCUS/TRACKING COIL DRIVER, L103
SPINDLE/SLED MOTOR DRIVER 0
D901
DGND
IC501 1SS355TE
FAN8035L
AUDIO_DGND
R579
8.2k
AUDIO_5V
AUDIO_AGND (Page 47)

QQ
QQ
QQ
R534
TEL
C514 R533
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
SPDL+ 0.01 33k 56k
+3.3V REGULATOR
C151 100 6.3V

IC907
4V
SPDL- µPC2933T-E2
376315150 892498299
376315150 892498299
C926 220
C928 10
I O
SLEDB- G
CN102
R530
C512 R529 13P
56k
SLEDB+ 0.01 33k C925 C927
22 AUDIO_GND
0.01
16V
AUDIO_5V
DGND
V+5V
C101
220
4V VGND
SLEDA-
DGND
SLEDA+ DGND
C510 R527 D+3.3V

0.001 2.2k R525 10k TRDR
FL101 D+3.3V
R587 0
TRK+ R524 10k TFDR DGND (Page 55)
D+5V
TRK-
FB105 MGND
C509 R522
FCS+ 330p 4.7k R523 10k FRDR M+12V
R521 100k
R519 100k
R520 10k FFDR

C508 0.001
C506 330p
R586 200k
R516 4.7k
R517 2.2k
R512
56k
33000p
C504
C503
33000p
R513
R555
56k
FCS- 0
R515
10k
R514 C524
10k 0.01
C525
0.01
C528
m
C529
www
22
0.01 16V
R510
150k
R511
150k
. .
HCD-ZX10D
42 42
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-14. SCHEMATIC DIAGRAM – DMB07 BOARD (4/8) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams. • See page 79 for IC Pin Function Description.
(Page 41)
8 9 2 4 9 8 2 9 9
E1
E2
E3
(4/8)
D2
768FS
FL901
D3
C901
C918 C902 C906
100
0.01 4V 0.01 0.01 R911 R912
10k 10k
D4
D5
XHWR
RXD
A7
A6
A5
A4
A3
A2
A1
A0
XHRD
XRST_CD
TXD
CLK_RF
DATA_RF
DSAVE
ZIVA_CTRL_BUS
WP
DRVRDY
DRVCLK
27M
LDSEL
CS_SPC
SCL
SDEN
I2C_SCL
I2C_SIO
(Page 45)
R978 10k
R901 22
R902 22
R905 22
R906 22
R907 22
Q901
TEL
TEL
DTC114TE-TL
LASER DIODE
GND
A2
A1
A0
SELECT SWITCH
(Page 40)
SWITCHING
EEPROM
SDA
VCC
SCL
WP
IC902
IC903
SN74AHC1G32DCKR
BR24L16F-WE2
13942296513
13942296513
V
LOCK
SDA
SCL
WP
R958 FOK
22
MD2 TSD-M
R915 100 SCLK

R913 R918
10k 22
SDA R974 0 GFS_CD
FL908
MNT1
D1
SWITCHING
FJMP1 C903
C908 C909 C904
100p 100p 0.01 100 IC904
FJMP2 4V SN74AHC2G74HDCUR
SENS R916 1k FE
R962 10k
CDSP2 R988 0 TE
FB903
FB902
QQ
QQ
CDSP4 R917 1k PI
QQ
XCS1882 C913 33000p JIT
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
R994 0 SP_ON
C907
D0 MECHANISM CONTROLLER R995 0 SPFG
R931 22
R932 22
R933 22
0.01
IC901
376315150 892498299
376315150 892498299
D1 R996 0 SLED
CXP973064
-245R
D2 R997 0 MUTE_2D
D3 MUTE_CD R984
10k
D4 R998 0 GFS_DVD
R936
100
D5
D6 R938 10k
D7
XINIT0 R920 100 SQCK
XINIT1
VDD1 NC
R990 0 SQSO
VSS1 NC
R922 22
MO1 NC
NC SO3
VDD2 VDD3
VSS2 VSS3
XTI SO2
C915 XTO SO1
7p
R930 100
R929 100
R928 100
R926 100
R925 100
C914 X902 R927
R943 100
R942 100
R921 100
R940 100
9p 27MHz 1M
R904 10k
CLOCK GENERATOR
R964 IC906
SM8707GV-G
10k
-E2
C905 X901 R935 C910

DRVCLK
CS_SPC
DRVIRQ
0.01 20MHz 4.7k 0.01

DRVRX
DRVTX
SLEDA
SLEDB
JITOFF
INLIM
SCOR
LDON
MIRR
COUT
CLOK
DATA
XLAT
L901
FL903
C916
C917
100
0.01
MREQ
R923 220 RST_SPC 4V

SYS_RST
I2C_SCL
I2C_SIO
CN901
7P
RFMON
RF
IC111
RF_AC
R970 µM6K1NL02TN RF_AC
0
SWITCH JIG_MOD
GND
CN101 TXD
5P 1S 1D TXD (FOR CHECK)
RXD
I2C DATA 1G 2G RXD
I2C CLK 2D 2S DGND

R975 R908
C924 10k 10k
MUTE REQ 3V-D
0.01
m
DGND
www
SYS RESET
VIDEO SW VIDEO_SW
(Page 53) VIDEO MUTE VIDEO_MUTE
(Page 45)
. .
HCD-ZX10D
43 43
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-15. SCHEMATIC DIAGRAM – DMB07 BOARD (5/8) – • See page 75 for IC Block Diagrams.
(5/8)
8 9 2 4 9 8 2 9 9
SIGNAL_BUS
(Page 41) F2
F4
R202
F5
47k
TEL
TEL
LATCH
IC256
SN74LV573APWR
13942296513
13942296513
SD7 AV7
Q201
DTC114TE-TL SD6 AV6
INVERTER SD5 AV5
SD4 AV4
SD3 AV3
SD2 R9998 0 AV2
SD1 R9999 0 AV1
SD0 AV0
QQ
QQ
TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0(Page 45) 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
R270
0
XSRQ XSRQ_SAMBA
LATCH
IC258
SN74LV573APWR
XSAK R9980 0 XSAK#
SDEF SDEF#
XDCK R9981 0 XDCK#
XSHD
EXT_SIGNAL_BUS
(Page 47)
F6
C284 C286 C287
0.01 0.01 0.01
D3V
R198
4.7k
(Page 42)
R9882 0
R9883 0
R9884 0
R296 R197
ADC_DATA 0 4.7k
R9885 0
www m
IC259
R294 R293
0 0 SN74LV573APWR
LRCK
BCK
LATCH
. .
HCD-ZX10D
44 44
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-16. SCHEMATIC DIAGRAM – DMB07 BOARD (6/8) – • See page 74 for Waveforms. • See page 79 for IC Pin Function Description.
(6/8)
8 9 2 4 9 8 2 9 9 ZIVA_5.1CH_BUS
BCK1
XCK1
LRCK1
BCK
XCK
DATA3
DATA2
DATA0
DATA1
LRCK
CN202
MREQ
V C Y/G CB/B CR/R
WIDE
4P
I/PSW
D5V
R228 0
R217 0
GND R268 R225 R226
0 0 0
(FOR CHECK) TXD
DAC_CTRL_BUS
(Page 47)
RXD
MC
MDI
ML
R278 R279 R280 R281 R282
R222 0
R221 0
R219 0
R220 0
R269 0
75 75 75 75 75
R263 R264 R265 R266 R267

VMUTE
R271 100
R272 100
C234 C233 C232 C231 C230 75 75 75 75 75
0.01 0.01 0.01 0.01 0.01
F3 VIDEO_SW
27M
R273 R274 R275 R276 R277
F4
0 0 0 0 0
R251 0 R290
R260 4.7k R261 4.7k
100 (Page 43)
C226
F2
0.1
(Page 44) MREQ R259 4.7k R1000 4.7k
C238
CN105
F6 17P
0.01
VIDEO.SW
VMUTE
V_GND
R284 V
C237
180 V
0.01
C256 R283
V_GND
0.01 1k
C276 C
C
0.01
C_GND
Y/G
C274 Y
0.01
TEL
TEL
Y_GND
CB/B
C236
0.01 CB
MREQ
ZIVA_CTR_BUS CB_GND
CR/R
C241 (Page 49)
CS_SPC
CR
0.01
(Page 43) CR_GND
R234 R253 R254 R291
V_GND
13942296513
13942296513
10k 4.7k 4.7k 100
I2C_SCL MD31 C279
V_5V
100p
MD30 I/PSW
R292 I/P_SW
100
I2C_SIO MD29 WIDE
C242 WIDE
0.01
MD28
C248
0.01
MDQM3
R15 22
V5V
MD27
VGND
MD26
AV7 MD25 (Page 42)

AV6 MD24
AV5 MD23
EEPROM
AV4 MD22
R240
47k IC204
BR9040F-WE2 MD21
MD20
R/B WC AV3
QQ
QQ
VCC GND
AV2 MDQM2
QQ
CS DO
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
AV1 R14 22
SK DI
Q202
AV0 MD19
DTC114TE-TL
BUFFER MD18
XSRQ_ZIVA
376315150 892498299
376315150 892498299
MD17
XSAK#
MD16
G2
SDEF#
XDCK# MD15
R227 C252
DVD SYSTEM PROCESSOR
4.7k 0.01
DRVIRQ IC207 MD14
ZIVA5X-C1F
DRVCLK MD13
DRVTX MD12
C253
0.01
DRVRX
DRVRDY MDQM1
R248
4.7k R13 22
C204 C290 C251 C244
0.01 100p 0.01 0.01 ALE MD11
C229
RST_SPC MD10 0.01
MD9 C278
100p
MD8
MD7
R241 C261
0 0.01
MD6
MD5
C277
100p
R244 1k MD4
R805 0
C263
MDQM0 0.01
R12 22
R246 R247 1k MD3 C271

C216 0.01
10k R255 0 0.01

SYS_RST MD2
SYS_RST MD1
C280
100p
MD0
MCLK
C257 C270
0.01
HA3 R230 33 R213 68
0.01 (Page 46)
HA2 R231 33
MWE
C269
0.01
R299 G3
820
C268
0.01
A3V-2
C267
D5V 0.01
C281
100p
C272
DGND
R232 33
(Page 42) 0.01
R10 22
R11 22
FL205
D3V G4
I G O +1.8V REGULATOR
C260 C265 C266 C283 G5
MCSO
MRAS
MCAS
m
IC211 0.01 10 0.01 100p
HAD15
HAD14
HAD13
HAD12
HAD11
HAD10
www
µPC2918T-E1 C282
MA10
MA11
BA1
BA0
HAD9
HAD8
HAD7
HAD6
HAD5
HAD4
HAD3
HAD2
HAD1
HAD0
100p
MA9
MA8
MA7
MA6
MA5
MA4
MA3
MA2
MA1
MA0
R/W
HA1
FL206 G6
JIG_MOD
G7
C214 C215 C213 R245 4.7k
100
0.01 0.01 D202 C291 C262 C247
4V 1SS355TE 100p 0.01 0.01 R257 4.7k
. . G8
G9
HCD-ZX10D
45 45
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
(7/8)
8 9 2 4 9 8 2 9 9
G3
G2 IC203
HY57V283220T6
C218 128Mbit SD-RAM
0.01
MD0 MD15
C220
0.01
MD1 MD14
FL203
MD2 MD13
C227
0.01
MD3 MD12
C201 C202 C203 C275
0.01 0.01 0.01 0.01
MD4 MD11
C235
0.01
MD5 MD10
MD6 MD9
HA1
HA2
HA2
C239
0.01
MD7 MD8
C240
0.01
TEL
TEL
MDQM0 MDQM1
MWE
MCAS
ADDRESS MRAS MCLK

LATCH
MCSO SYS_RST
13942296513
13942296513
MA11 MA9 R301
IC233 1k
BA0 MA8
SN74LV573APWR
BA1 MA7
MA10 MA6
MA0 MA5
MA1 MA4
MA2 MA3
HA20
HA21
HA22
MDQM2 MDQM3
C243
0.01
MD16 MD31
C245
0.01
MD17 MD30
MD18 MD29
HAD8
HAD9
HAD10
HAD11
HAD12
HAD13
HAD14
HAD15
C246
0.01
QQ
QQ
MD19 MD28
TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
MD20 MD27 C249
0.01
MD21 MD26
376315150 892498299
376315150 892498299
MD22 MD25
C250
(Page 45) 0.01
MD23 MD24
ADDRESS
LATCH
IC232
SN74LV573APWR C255 C254
10 0.01
C264 C258 C259

0.01 10 0.01
R250
FL204
0
HA12
HA13
HA14
HA15
HA16
HA17
HA18
HA19
R215
0
PROGRAM ROM
G4 IC205
MR27V3202F
HA21
HAD0
HAD1
HAD2
HAD3
HAD4
HAD5
HAD6
HAD7
WE A20
HA19 HA20
A18 A19
HA18 HA9
A17 A8
HA8 HA10
A7 A9
HA7 HA11
A6 A10
HA6 HA12
A5 A11
HA5 HA13
A4 A12
HA4 HA14
A3 A13
HA3 HA15
A2 A14
HA2 HA16
A1 A15
ADDRESS HA1 HA17
LATCH A0 A16
CE BYTE
IC231 VSS VSS

SN74LV573APWR R/W HAD15 C205
OE DQ15 0.01
HAD0 HAD7
DQ0 DQ7
HAD8 HAD14
DQ8 DQ14
HAD1 HAD6
DQ1 DQ6
HAD9 HAD13
DQ9 DQ13
HAD2 HAD5
DQ2 DQ5
HAD10 HAD12
HA10
HA11
DQ10 DQ12
HA4
HA5
HA6
HA7
HA8
HA9
HAD3 HAD4
DQ3 DQ4
m
ALE HAD11
www
DQ11 VCC
G5
G6
G7
. .
G8
G9
HCD-ZX10D
46 46
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
8 9 2 4 9 8 2 9 9
(8/8)
ZIVA_5.1CH_BUS
DATA0
DAC_CTRL_BUS
(Page 45)
MDI R310 100
MC R311 100 C324 C323 C322

0.1 0.1 0.1
ML R312 100
TEL
TEL
R313
FL302
10k
XCK1 JW806 0 R314 22
BCK1 JW805 0
13942296513
13942296513
LRCK1 JW804 0
C325
100 C326 R309 C309
D/A CONVERTER
4V 0.01 220 100p
IC302
PCM1609KPTR
R308 C308
220 100p
DATA1 JW801 0
DATA2 JW802 0 C321

100
DATA3 JW803 0 6.3V
R307 C307
220 0.01
R306 C306
220 0.01
R305
QQ
QQ
220
TEL QQ
CN107
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
C305
JW392
21P
0.01
0
SW(LFE)
376315150 892498299
376315150 892498299
R304 C304
DGND 220 0.01 A-GND
AUDIO_5V SURROUND-R
A-GND
D392
1SS355TE
SURROUND-L
A-GND
+3.3V REGULATOR
IC392 CENTER
BA33BC0FP-E2
R303 C303 A-GND
220 0.01
I O
G FL303 FRONT-R
C302
C392 C394 A-GND
(Page 42) 22
C393
220
0.01
0.01
16V 4V FRONT-L
R302
AUDIO_AGND A-GND
220
R392 D393 D394
DOWNMIX-R
10 1SS355TE 1SS355TE
AUDIO_DGND A-GND
DOWNMIX-L
AUDIO_GND (Page 56)

D1304 D1303 R1302 AUDIO_5V
1SS355TE 1SS355TE 0
EXT_SIGNAL_BUS ANALOG-IN-R
C1302
0.1 A-GND
ANALOG-IN-L
(Page 44)
R369
A-GND
0
C357 C356
1 1
50V 50V
IC352
R353 R352
PCM1800E/2K
0 0
LRCK R328 0
BCK R329 0
R362
ADC_DATA R327 0 10k
XCK R335 0
C364 C363
100 0.1 C367
FL352 6.3V 470p
C368
m
470p
www x ia o y u 1 6 3 c o
C366 C365
100 0.1
6.3V C352 C355
100 100
6.3V 6.3V
. .
A/D CONVERTER
HCD-ZX10D
47 47
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-19. PRINTED WIRING BOARD – VIDEO BOARD – • See page 35 for Circuit Boards Location.
1 2 3 4 8 95 2 4 69 8 2 9 9
J1200
J1202 COMPONENT
VIDEO
S VIDEO OUT J1201
VIDEO OUT PR/CR PB/CB Y
C Y
A G
(CHASSIS) (CHASSIS)
VIDEO BOARD
C1230
R1233
TEL
TEL
R1231 JR1211
C1228
C1222 C1221
C1219
13942296513
FB1204
13942296513
C1224
R1232 FB1200
JW1230
JW1203 C1223 FB1201
C1220
FB1205
C1200
JW1209
JW1200
JW1201
FB1202
B
JW1237
JW1229
JW1202
JW1228
JW1231
C1205 C1201 CN1201
JW1227
C1202 JR1202
JW1233
1
C1206 IC1200 2 H
JW1236
QQ
QQ
JW1241 R1202 JW1242 GAME/HP
QQ
5 4
TEL
BOARD
R1203 1 3 9 4 2 2 9 6 5 1 3
C1218 15 14 C1207 3 7 6 3 1 5 1 5 0 C1231 8 9 2 4 9 8 2 9 9
CN802
376315150 892498299
376315150 892498299
JW1234
8 1 (Page 62)
JW1232
JW1239
C1225
JW1206
C1204
C1216 JR1210
R1204
C1208 C1203
C1226
C CN1200
JW1225
JW1208
JW1240
JW1215
JW1214
JW1213
JW1212
JW1235
JW1217
R1206
R1201
C1214 1
G
JW1238
C1217 28 1 C1210 C1209 2
JW1211
MAIN
IC1201
R1210
R1205 BOARD
JR1204 NO206
JW1218
FB1203 JR1203 E
(Page 51)
JW1243
JW1226
R1223
JW1224
C1213 JR1205
R1207
FB1206 Q1200
JW1205
C1212
C1215 JR1208
CN1202
R1200
R1208
11
C1211
JR1209 1-862-130- (11)
D
DMB07 BOARD
D CN105
(Page 38)
HCD-ZX10D
48 48
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-20. SCHEMATIC DIAGRAM – VIDEO BOARD – • See page 74 for Waveforms.
8 9 2 4 9 8 2 9 9
JW1205
CN1202
17P
WIDE
VIDEO AMP, 75Ω DRIVER
I/P_SW JR1204
IC1201
0
V_5V MM1623BF J1200
3P
V_GND C1205 1 50V
JR1203 FB1200
0 0
CR_GND C1218 1000 6.3V R1202 75
PR/CR
CR C1206 1 50V
FB1201 C1219
0 22p
CB_GND C1217 1000 6.3V R1203 75
PB/CB COMPONENT
CB C1207 1 50V
FB1202 C1220 VIDEO
TEL
TEL
Y_GND C1216 1000 6.3V R1204 75 0 22p
Y
Y C1226 C1215 1000 6.3V R1205 75 C1221
22
22p
C_GND 50V C1225 0.1
C C1208 1 50V C1214 1000 6.3V

13942296513
13942296513
(Page 45)
V_GND FB1206 JW1206 JW1200
V C1209 1 50V R1210 100
V_GND C1213 1000 6.3V

R1200 FB1203
10k 0 (CHASSIS)
VMUTE C1210 1 50V R1207 10k
J1201
VIDEO.SW 1P
R1206
75 VIDEO OUT
R1232
68
R1223 FB1204
10k 0
C1211
JW1209
100 C1212 R1231 R1233 C1222
0.1 1M 100k 22p
10V
QQ
QQ
QQ
R1201
JW1201
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
10k JR1209 R1208 C1228
0 75 0 (CHASSIS)
376315150 892498299
376315150 892498299
JW1208
JR1210
0
CN1200
2P FB1205
0
VIDEO OUT CONTROL
J1202
VIDEO +9V S VIDEO OUT
(Page 53) C1224 C1223 JW1202

VIDEO SWITCH, 75Ω DRIVER 22p 22p
IC1200
C1230
NJM2244M
0
JW1203
Q1200
DTC114EKA C1231
INTERLACE/PROGRESSIVE C1201 1000
10 50V 6.3V
SELECT SWITCH C1202
CN1201
10
2P C1203
50V 0.01
GM-SIG
GM-GND
C1200
100p
JR1202
0
(Page 63)
C1204
JR1208 100
JR1205 0 10V
HCD-ZX10D
49 49
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-21. PRINTED WIRING BOARDS – CHANGER SECTION – • : Uses unleaded solder. 7-22. SCHEMATIC DIAGRAM – CHANGER SECTION –
8 9 2 4 9 8 2 9 9
• See page 35 for Circuit Boards Location.
1 2 3 4 5 6 7 1 2 3 4 5 6 7 8
MAIN BOARD
MD-94 BOARD F CN509

(Page 51)
A
A
MD-94 BOARD
S002
ROTARY ENCODER
CN001 CHUCKING DETECT,
11P TRAY OPEN/CLOSE DETECT
CN003
B OCSW2 1 3P
B OCSW1 2 3 OCSW1
CKSW1 3 2 CKSW1
SGND 4 1 SGND
SENSOR LED 5
F TSENS 6
C MAIN
DSENS 7
CN004
2P
BOARD
S002 (4/5) LM- 8 2 LM-
M M001
TEL
TEL
ROTARY ENCODER
C CHUCKING DETECT,
CN509
LM+ 9 1 LM+ (LOADING)
(Page 55)
TRAY OPEN/CLOSE
TM+ 10
DETECT
TM- 11
TRAY S001
13942296513
13942296513
M001
OPEN/CLOSE D TRAY
M DETECT OPEN/CLOSE
(LOADING) DETECT
OPEN CLOSE
OPEN
CN002
D CLOSE
6P
1 SENSORLED
13
(13) 2 TSENS
E 3 DSENS
4 SGND
M002
(TABLE) 5 TM+
M 6 TM-
E
QQ
QQ
SE-130 BOARD
TEL 1 3 9 4 2 2 9 6 5 1 3 QQF
3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
SE-130 BOARD
F
4
G
3 2
1 CN101 CN102
6P 2P
TM- 1 2 TM-
2
M M002
(TABLE)
1 TM+ 2 1 TM+
G PH102 H SGND 3
4
DSENS 4
6 2 0.1 3 PH101
TSENS 5 RPR-220C1N
1.2 2
4 DISC IN
3 SENSOR LED 6
5 1 1 DETECT SENSOR
13
(13) 1.2 2.3
1
I
PH102
TABLE
SENSOR
PH102
0.1
4
RPI-392
HCD-ZX10D
50 50
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-23. PRINTED WIRING BOARD – MAIN BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3
VIDEO/SAT
OUT
4
J701
VIDEO/SAT
IN
PHONO
IN
5 6 7
8 9 2 4 9 8 2 9 9 8 9 10 11 12 13
A R L R L R L
GAME/HP SURROUND
J202
SUBWOOFER OUT
M501
(FAN)
MIC BOARD
BOARD BOARD
M CN920
(Page 62)
CN801 L N NO702 M
(CHASSIS) (Page 62) (Page 60)
MAIN BOARD
FB502
R529
R516
R524
C523
JW217 Q270
R281
R277
C528 C525 C513 C259
C529
JW591
R525
Q553
C524
C587
R530
R586
R278
R523
R513
C586
FB501
FB503 E
FB500
C503 JR270 R279 B
JW216
R527 C510 C508 R276 1 3
C515
C518
C522
R515
CN513 C
R517
R528
C196
R520 C514 R505 R280
R585
JW100
JW225
R501 JR118
R511 R507
D554
C519 C520 4 1 E
IC519
C516 R509 E
JW700
JR204
R157
D553
B C194 R521 R522 C526 C502 R228 C204 R225 E R588
C505
R234 R229
Q101 Q105
JW231
JR500
JW232
E E C257 Q555
R231
E JW701 R526
R155
JW520 CN502
C182 C521 R587 Q557 EPT501
R500
C500 R518
R226
C506
JW230
R214
R519
R512 R514
5 8
C527
Q104
JW173
JW174
JW665
C517 E 1
C152
JW664
R156 JW101 C511 R232 E C205 R272 C254
R275
Q203 C221 R207 JW204
R502
R160
R508
C201
R164
R158 R199 Q563
JW202
C157 C504 Q201
JW172
R206 Q212 Q211
JR212 JR211
R270
T101 E R282 R510 R506 JW592 Q204 C222 E
R283
JW203
R285
R504 C501 JR210 JR209 E C220 E JW590
BIAS OSC C512 (CHASSIS)
R224
JW593
C170
C137
JR111 E E
R271
C223
C149
JW589
R127
L102 R136 C509 C507 R215
Q115 R267
R299
JW205
JR113
R273
Q202 Q200
IC501 R218
R274
R139 L103 C142 R284 R503 R221 42 22
Q116
JW201
7 C255
C192
R201 E
R227
E E E C213
R261
E
JW599
R138 R143
JW660
R269
JW659
JW597
R223
R222
Q106
JW605
R192 Q108 R119 JR104 E E
JW598
Q114 Q113
R263
C139 R172 R200 R217 Q210 R255 R246
Q111 R109 E C209
JW594
JW595
C210 C249
R142 R123 Q109 CN503
R124 Q112
E E C233 R256 C211 C253 C234
C191 R170 NO103 C160 E
JW206 R268 Q207
R213
R121
C R137 C207
JW641
JW167
HPRE101 R122 E Q107 E R159 C231
C156
C154
R212
R264
Q110
JW603
JR112
JR115
8
JW604
(REC/PB/ERASE) C164 JW233 C232 JW207 R266 R262 E
JW606
JW168
L104 C162
C123
Q208
(DECK-B)
JR217
R211
R128
R149
JW223 1 21 C243 E
R244
R102 E (FOR CHECK) Q165 JR213 R254
C244
Q209
TEL
TEL
C239
JW200
C252
JW800
C225
Q102
JW175 R210 C219 C240
JW166
R166
R252
R104
R245
JR114
C200
R242
R247 R265 R238 C224
C251
R253
R129 C226
JR105
• Semiconductor Location
JR440
R241
E
JW170
C159
C242
JW176 R239
JW169
JW171
C208
E R153
FM75Ω TUNER Q103 C237 JW208
E
C228
C165 R235
C241
E
R240
JR205
R165
C218
C126 C176
(COAXIAL) JW108 C166 R150 C235
UNIT
JW608
3 1 C214
C216 R219
C153 JW209
C150
CN504
JW227
R251
DMB07
R243
R148 JW177 R220
R257
JW607 E
C236
R236
R209
SUPPLIED C169 CN101 R250 JR206 C230 Q206 BOARD
JW106 R230
R248
1
Ref. No. Location Ref. No. Location
JR207
WITH THE
R161
C215 R216 R208
JW609
R237 CN107
R152
NO510
R204
JW222
JW226
JW105 JW178 Q205
R141
ASSEMBLED R258 C229 JW211 (Page 38)
C114 C217 C238
C227
AM JR514 JW620
R205 R203
R287
R259
BLOCK C168 R154 1
R151 R260
R168
13942296513
13942296513
R249 R233
JR131
JW210
C212
R103
R292 C293
JW519
NO102 C247
D192 G-3 Q191 G-3 C134 C246
JW214
JW213
JW115
R169
JW212
C155 Q524 JW228
R167
JW215
C163 C245
JR116
C184 E C206
JW165
3 E R295
D HP101 C113 C158 C148 JW229 C203
C133
D193 G-3 Q192 G-4 JW110 4 E
JW161
(PB) C145 JR208
C167 R202 JW221 Q291 CN508
R186 R147 R555 JW162 R291
JW218
(DECK-A)
FL585 (AUS)
R182 1 C125 C127 C248
R145
D194 H-3 Q193 H-3 R188
JW109
C183 65 64 C147 C140 C138
Q140 R556 R296 (E15, SP, MY)
13
JW220
JW219
R184 C177 R561 C202 R289
C185
FB585
JW107
R560
C146 1 3 NO511 JW235
D329 H-13 Q194 H-4 R187 R183 C172 C179 C144
R293
R290 1
R140
R341
(AUS)
C188
R185 C181 R288
JW236 JW568 C292
C545
IC101
JW528
D402 I-6 Q195 H-3
JR103
C143 JW157
JW530
JR518
JW224
C173 R179 R178 80 R106 C531 JW234
JW237 R294
JW156 Q290
E
D403 I-5 Q196 H-3 JW111 C178 JW163
JW164
JW529
C110 JW238
C174
JW583
JW535
JW534
C136
C135
R135 E
JW538
JR519 1 41 JW154 FB584 JW553
JW155
JW159
JW158
JW112
JW160
Q180 R134
D404 I-5 Q198 G-4 JR119
JW544
JW543
R181
C132 JW153 Q293 Q292 E R297 R298
(AUS)
JW125
JW113 R171 40 C116 C130 B
JW650
JW556
E
D405 J-5 Q199 G-4
R107
C530 JW152 6 FL584
C544
JW634 C180
C109
JW558
JW663
JW554
C108
E DMB07
JW560
JW559
JW557
R554
C107
D406 I-6 Q200 C-9 JW151 JR214 NO581 FB583 BOARD
R557
R131
JW504
JW499
R101
JW525
CN102
JR501
C103 C111 R559
C131 JW150 (Page 38)
C141
JW126 FB582
D407 J-5 Q201 B-9 24 25
JW537
JW536
JW532
C101 R558 Q523
JW533
C536
R531 JW149
JW610
C175
JW545
C124
JW633
C102 C104 R108
C119
C121
R130
D408 J-10 Q202 C-8
R114
JR102 Q530 C117 R126 JW148 JR215
E
JW661
(AUS)
JW540
C151 R105
JW124
JR510 C115 JW147
R113
R286
0
R133
JWH50
D501 H-12 Q203 B-8 C171 C128
QQ
QQ
1
JW555
JW123
JW632
E R110 R111 C122 JW523
C129 E JW146
R120
JR517
D502 H-11 Q204 B-8 JW522
QQ
JW563
JW562
R132
JW116
TEL
R162
R115
R117
R118
C118
R125
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
JR216
Q145 JW145
JW140
JW141
JW539
JW639
JW640
JW128
JW127
JW561
D553 B-11 Q205 D-12 C106 C112 C120
JW139
JW611
JW130
4 JW521
D554 B-11 Q206 C-12 56
JW326
JW144 JW JW518
F JW117
376315150 892498299
376315150 892498299
NO580 JW702
JW136
JW137
JW138
JW638
JW143
D580 G-9 Q207 C-12 JW118 1 JW517
JW635
JW328
IC517 C580 JW516
JW131
JW142 R580 1
D581 G-9 Q208 C-12
JW135
JW195
JW631 JR107 1
R439
C582
JW565 2
JW515
JW194
Q209 C-11
JW637
JW134
JW644
E JW193
JW472
E JR108 JW550 4
JW190
JW191
C592
IC101 E-5 Q210 C-11 Q529 5
JW325
JW192 JW548
JW617
Q528 C590
D580 R581
IC401 H-5 Q211 B-12 JR515 JW327 JW514
JW642
L580 1 CN505
C595
JR512 JW197 6
JW465
JW464
Q
JW463
JW462
JW467
JW468
JW469
JW466
IC402 I-5 Q212 B-11 JW198 JW567
IC510
C542
JW119 1 3 JW502 POWER
Q539 Q540 JW658
R173 JW480 BOARD
IC501 C-10 Q270 B-10 G R196 JW324
JW179
JW630 E
R584
JW566 JW505 CN601
D192 Q191 C186
IC516
C540
JW616
R112 E JW479
JR509
Q192 C195 JW569 D502 (Page 57)
IC510 G-10 Q290 E-12 JW513
JW471
CN104 JW615 R579
R577
E R197 JW478 C596
R174
JR400 JW526 4 D501
JW470
CN404 C543 4
R447 E R195 C541 C584
R444
IC511 G-10 Q291 D-12
C594
JW503
E JW461 JW477 D581 C591 4
R175 R567
Q506
JR401 C598
JR109
R448 Q199 R198 R578 JW476 E 1

D193 13
Q198
C583
IC513 I-11 Q292 E-12 TAPE MECHANISM R449
JW182 JW460 C539 JR475 JW579
JW180
JW459
(E15, SP, MY)

R176
JW587
C538
JW613
JW612
Q509
R177 E Q538
JW451
BLOCK R450 Q193 D329
IC514 J-13 Q293 E-12 JW657 R590 R591
R572
E JW457 (E15, SP,MY) 3
JW452
JW614
JW458 E 1
(AUS) JR402 JW453

Q194
R193
JW474
Q190
R180
JW578
JR110
R451 JR471
R576
SUPPLIED WITH THE E E
JW652
C401 E JW656 2
ASSEMBLED BLOCK R452 R189 R446
IC518
JW601
JW473
IC515 I-12 Q401 I-5 R453 D194
E JW455 JW454
R445
E
Q537
JW447 C585
4 IC511
Q590
R583
E JR502 JW577 C599 C597 JW651
Q196 E R432 R582
FB462
R568
IC516 G-9 Q402 H-6 R454 5
Q402
JW456 JW446 L581
51 50 R434
C187 C534
H R466 1
JW507
IC517 F-9 Q506 G-9 Q195
C462 C464 JR404 C535 JW445 JW570 JW580
R575
R191 JR503
R465
JW181
JR407 E Q536
R571
JW512
R433
R190
JW449
JW444
JW187
JW498
(E15, SP, MY)

IC518 H-9 Q509 H-9 JR403 E E JW440
R474
R467 R468 1
JW586
JR406 R194
JW541
JW506
JR504 Q535 1
IC401 R436
R437 JW443 JW571
R473
31 R430
IC519 B-6 Q523 E-6 E
JW511
JW183 JW439 JR505 JW442 JW572
JW122
JW450
C
R475
R569 Q533
JW448
JW185 30 JW438 JW441
Q524 D-6 80 R429
JW653
JW552
C533
DMB07
JW510
JW509
JW508
JW434
JW500
Q534
JR405 R419 C416 C532 JW573 CN506
Q101 B-3 Q528 G-3
BOARD
P
JW497
JW184 E
JW188
R476 81 X402 JW433
JW662
CN101
FB416
R417
E R573
R566
(Page 38) JR506 POWER
Q102 C-3 Q529 F-4 JW432
JW496
R563 R562 BOARD
JW314
Q532 C342
R421
JW246
JW313
JW247 JW431 CN602
C386
JW315
JW527
R565
JR513
JR516
Q103 C-3 Q530 E-4 R482 X401 C414 (Page 57)
JW322
JW250 JW430 3
100 1 R574
C387
JW575
I
JW574
R411 R413 R427 JW437 E C306
R486 JW429
Q104 B-3 Q531 I-7 NO206
R481
C497
C499
R420 JW436 Q531
R570 JW316 E Q554
JW189
1 2 D406 R431 JW428
JW301
JR409
C403
R428
R307
C410
Q552
Q105 B-3 Q532 I-6 C411 13
D403
R328 R317
JW400
JW490 JW435
JW318
JW319
D402 JW427 1
G
R404
R426
IC513 JW309
R423
R308
JW320
Q106 C-4 Q533 H-7
R492 R391
JW491 3 1 JW426 JW302 C307

R477
C498
R425
JW300
R493 R393
C402
JW321
R424
VIDEO R401 C341 C304
R422
BOARD JW425 R314
Q107 C-4 Q534 I-6 IC515 9 1 9
JW405
JW248
C404 4 5
JW406
JW249
JW407
R409
R487
JW239
JW240
JW241
JW242
CN1200
JW243
JW244
JW245
R494
E JW424
JW414
JW415
D404
JW411
JW412
C412
Q401
C303
(Page 48)
JW413
R412 C305
Q108 C-4 Q535 H-7 R397 JW423 R315
JW410
(E15, SP, MY) JR441 E
IC402
JW486
R309
JW401
JW402
JW403
JW485
JW306
JW303
JW404
JW495
Q870
JW618
JW576
JW619
JW422
JW199
JR218 R318 JR300 R300
Q109 C-4 Q536 H-6
JW307
JW482
JW481
JW488
JW494
JW493
JW643
R304
R312
R306
R395 R303
JW408
4 CN401 1 JW409 JW655 R313 R310

D407
R301
Q110 C-4 Q537 H-6 JW666 R305 C302
JR408
JW312 JW310 L300

JW487 10 CN402 R302
D405
CN507 JW420
Q111 C-3 Q538 H-6 3 1 1
JW311 1 CN509 11
JW308
(FOR CHECK)
R311
NO401 JW419
JW484
JW492
C301 C300
Q112 C-4 Q539 G-7 J (FOR CHECK)
JW475 R316 1
JW416
D408
JW418
Q113 C-4 Q540 G-7 JW483 IC514
C395
JW417 JW317
Q114 C-4 Q552 I-11 JW489
JW323
JW305
11
Q115 C-4 Q553 B-11 1-861-315- (22)
www m
VOLTAGE SELECTOR
Q116 C-4 Q554 I-11 J PANEL BOARD
CN906 K BOARD F MD-94 BOARD
CN001
(Page 64) CN1000
Q140 D-6 Q555 B-11 (Page 72)
(Page 50)
Q145 F-6 Q557 B-11
Q165 C-4 Q563 B-7
Q180 E-3 Q590 H-13
Q190 H-4 Q870 J-12
. .
HCD-ZX10D
51 51
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-24. SCHEMATIC DIAGRAM – MAIN BOARD (1/5) – • See page 74 for Waveforms.
HRPE101
(REC/PB/ERASE)
(DECK-B)
NO103
8P
(1/5)
8 9 2 4 9 8 2 9 9 HP101
(PB)
(DECK-A)
NO102
L-PB C125 C133 3P
680p
R-CH GND C127 L-PB L-CH
L-REC GND
C176 C126
680p 680p
R-PB C114 C113 R-PB
L-CH GND R-CH

C134
680p CN101
R-REC
C181 3P
GND 100p R
ERASE E-HOT Q111 Q113 Q102 Q103 GND

2SC3661 2SC3661 2SC3661 2SC3661
(FOR CHECK)
C170
C191 R192 330p MUTING MUTING MUTING MUTING L
0.0047
0.01 C192
3.3k Q112 Q114
100V
2SC3661 2SC3661 R128 R129
2.2k 2.2k
MUTING MUTING
R138 C139 R142 R170 C123
4.7k 0.001 27k 0 330p CN504
R109 R127 R122 R124 11P
2.2k 2.2k 2.2k 2.2k
T101 82 R182 100 ST-CLK
R139 C149 R143 R172
C196 BIAS OSC 4.7k 0.001 27k 0
47 A1 83 R183 100 ST-DOUT/MC-DIN
16V
84 R184 100 ST-DIN/MC-DOUT
R181 C177 C183
C154 L104 Q110 10k 10 50V 100p 85 R185 100 ST-CE FM75Ω
R156 C152 L103 120p 27mH
Q106-110 2SA812 COAXIAL
47 120p 27mH TUNER UNIT
MUTING CONTROL Q180 C169 R165 R104 ST+9V
C173 100 16V
C172 100 16V

10
2SC5938 47k 10k SUPPLIED WITH
C194 C182 R155 R158 R136 C157 SWITCH R121 R101 50V 86 R186 100 TUNED ANTENNA
C174 MUTING THE ASSEMBLED
22p
0.0068 0.01 10k 33 5.6k 0.0022 10k 47k R341 R169
0.1
470 87 R187 100 STEREO
C156 R137 16V 180 180 Q165 BLOCK AM
0.0022 5.6k 2SC5938
C185
C188
R103 0 ST-L
C184 22p
C179 C168 MUTING
TEL
TEL
R178 330k
C101 0.01 0.01
C102 C180 STGND
R199 R299 R123 10 R171 R166 R102
100k 100k Q109 10k 10 1k 10 50V R179 R167 1k 0
50V 50V ST-R
DTC114EKA 12k 12k
88 ST-MUTE
R119
C166
R168 330k
10k 10 C165
R157 Q101 Q104 C178 C167 10 R188
50V
10 2SD596 RT1P137P 1 1 50V 100
50V 50V
BIAS OSC
Q115 Q116 Q108
13942296513
13942296513
2SC5938 2SC5938 DTC114EKA DECK A/B SELECT SWITCH,
MUTING MUTING REC/PB EQ AMP,
INPUT SELECT SWITCH,
Q105 R164 R160 R282 R283 TONE CONTROL,
4.7k 47k 10k 10k
DTC114EKA
ELECTRICAL VOLUME,
Q106 Q107
Q104,105 BASS BOOST AMP
DTC114EKA DTA124EKA R531
REC BIAS L102 1.2k IC101
100µH A4
M61537FP-RFOG
SWITCH
C108
47 C164 10 50V
C137 R285 16V R107
0.01 10k 1k
C163 10 50V 63PIN
3PIN C103 10 50V C162 10 50V 62PIN
4PIN C104 10 50V JR104 0 DMR-OUT
C160 1 50V RCH

C142 R284
0.01 10k
LCH C159 10 50V R159 0 MICIN
C158 0.47
R117 R286 C106
2.2k 47k 1 R108 27k R149 0 FL
50V C141 R111
0.01 15k C151 0.01 R153 0 FR
QQ
QQ
R110
C111
15k
0.47 C109 220p C155 0.068
QQ
50V
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
A5 R154 10k
C112 10 50V C153 10 50V A7

60
59
R162 1M R152 100 52PIN

376315150 892498299
376315150 892498299
13PIN R113 100 R151 10k
R114 R161 R150
10k 6.8k 1k
A2 R132 6.8k C150 0.1
C117
2.2
R287
50V
R115 1k C115 0.1 C148 2.2 50V 47k
CN104
13P R118 C118 0.022 C147 0.022
2.2k
TC DGND C119 0.022 C146 0.022 R147
JR102 2.2k
REC(REV) 58 C120 R120 10k C145
0 10 10
BTRGM+ R454 10k 50V C121 0.033 C144 0.033 50V
C122 R145
0.0047 10k
BPLAY 56 C143 0.0047
D194
1SS355
BHALF 91 R453 10k
TAPE MECHANISM
BSHUT 90 R452 10k
C187
BLOCK
REC(FWD) 55 R451 10k 0.0047
C124 C110
SUPPLIED WITH
CAPM+ R450 10k 10 10
THE ASSEMBLED R190 Q196 50V 50V
2.2k 2SB1132
BLOCK AHALF 53 R449 Q195 R148
DTC114EKA
10k 2.2k
TCM MGND 14PIN
ASHUT 89
R448 D193 R191 R194
10k 1SS355 2.2k 680
ATRGM+
C135 220p
C132 1 50V
APLAY 51 Q195,196
R447 Q191,192
10k TRIGGER PLUNGER DRIVE
TRIGGER PLUNGER DRIVE
C140
(DECK-B)
(DECK-A) 0.27
R131 1k
Q193,194 R105 C171
10k 0.27
R130 2.2k
CAPSTAN/REEL MOTOR DRIVE
R134 470
R135 470
D192 C186 C138 R106 R140
1SS355 0.0047 0.47 470 10k
R126 C175
Q145
470 0.47
0.1
2SC1623 C136
220p Q140
FEED BACK
C107
2SC1623
R173 Q191 R176 Q193 SWITCH C131 C116
2.2k 2SB1132 3.3k 2SB1132 FEED BACK
0.22 100
Q192 Q194 C130 16V SWITCH
A6
A9
DTC114EKA DTC114EKA 0.1
R177
3.3k
C128
DML-OUT
R125 R133
LINK-L
0.47
47k 1M 50V R141 47k
R174 R175 R180 R189
52
54
57
2.2k 680 3.3k 680 LINK-R
C129 2.2 50V
31PIN 51PIN
A1
A2
A3
A4
A5
A6
A7
C1
C2
C3
C4
B1
B2
B3
B5
B6
B7
www m
(Page 53) (Page 56) (Page 54)
. x ia o y u 1 6 3 . c o
HCD-ZX10D
52 52
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-25. SCHEMATIC DIAGRAM – MAIN BOARD (2/5) – • See page 74 for Waveforms. • See page 79 for IC Pin Function Description.
8 9 2 4 9 8 2 9 9 (Page 52)
A1
A2
A3
A4
A5
A6
A7
(2/5)
CN507
21P
VF VF2
-VG -VG
VF VF1
R397 R487 R486 R482 R193 R494
10k 10k 10k 10k 10k 10k
-VG I-HOLD
R395
100
MIC DETECT MIC
I2C CLK CLK
I2C DATA DATA
BPM
EVER 4V
91
90
89
MIC
61
SIRCS SIRCS
∗ R393
88
87
86
85
84
83
82
D GND
R391 4.7k
R393 ∗
0 (SP, MY)
D GND 330 (E15) (E15,SP, MY) PROTECT
1.5k (AUS)
D+4V
C395 R493 R481
0.1 4.7k 100
SPEANA A7
(Page 65) R198 R197
C387 0.022
C386 0.022
10k 22k
A GND
R492 Q190
GC RESET GCRST 0 DTC114EKA
TEL
TEL
LED+9V
Q198
BPM LOW BPM DTC114EKA
LED GND
R112
4.7k
DISPLAY DSPL A5
POWER KEY POWKEY

13942296513
13942296513
Q190,198,199 Q199
2SC5938
STBY LED LED AMS DETECT C195
R195 R196
10k 22 10k
50V
AVCC
VREF
BPM-DET-LO
AVSS
MIC DET
I-HOLD
DEST-IN
MODEL-IN
B-HALF
B-SHUT
A-SHUT
ST-MUTE
STEREO
TUNED
ST-CE
ST-DOUT
ST-DIN
ST-CLK
MP3 PROTECT
REQ
NO401 S-MUTE
3P
MP3 ACK STK MUTE
EVER+4V H-MUTE
MP3 LP HP MUTE
D-GND R404 FR-RY
1SS355
MP3 CS FR RELAY
D407
100
STBY RLY RLY SIRCS R476 10k
SIRCS HP DET
LED
MP3 DATA OUT STBY LED R475 10k
(Page 73) GCRST
CN401 MP3 DATA IN GC RESET R474 10k
POWKEY
4P
MP3 CLK POWER-KEY R473 10k
D-GND R409 10k DSPL
BYTE DISPLAY-KEY
D+3.3V C412 0.1 CNVSS REAR-RY NO206
2P
CNVSS REAR RELAY
(FOR CHECK) IIC-CLK CLK C410 X401 32.768KHz C-RY VIDEO +9V
XC-IN C-RELAY
22p
IIC-DATA DATA VIDEO OUT CONTROL
C411 XC-OUT VIDEO OUT
QQ
QQ
RESET 15p R411 330k ALOG
Q401 RESET ANALOG_IN _MUTE R477
CN404 2SC1623 100
QQ
X402 R468 100 CLK2
7P (Page 49)
TEL
RESET 16MHz X-OUT AUDIO2-CLK D1
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
C414
VIDEO MUTE2 MUTE2 R467 100 DATA2
SWITCH C499 0.1 R413 D2
0.1 0 VSS AUDIO2-DATA
VIDEO SW MUTE1 D404 1SS355 R466 100 A6
R412
10k FB416 X-IN AUDIO1-CLK
SYS RESET SYS-R R401 22k R465 100 A9
376315150 892498299
376315150 892498299
VCC MASTER CONTROLLER AUDIO1-DATA
DGND R417 10k
R426 IC401
NMI VSS
22k M30620MCN-
MUTE REQ M-REQ A42FPU0 C464 C462
MP3RST TC-MUTE 100
0.01
I2C-CLK CLK C403 C404 R419 100 10V
SCOR VCC
0.1 0.1
I2C-DATA DATA R420 1k 61 FB462
(Page 43) AC-CUT AMS-IN
R421 100 60
R427 SENS BIAS
CN402 1k
R422 100 59
10P
CD-CLK TC-RELAY
D-GND R423 100 58
GND NC XLAT REC-B
TXD1 TXD1 C498 R424 100 57
1000 CD-DATA B-TRG
RTS1 RTS1 VDD 6.3V R425 100 56
XRST /SW RELAY B-PLAY
CD-POWER/DVD POWER
NC C416 55
2200
VOUT NC XTCN REC-A
6.3V
MCU VCC 54
1SS355
FAN CTRL CPM-CNT2

D403
(FOR CHECK) CLK1 CLK1 53

R431 STBY RELAY A-HALF Q531,532
10k
AC CUT MAIN
RXD1 RXD1 CLK R429 100 52 MUTING
CD-A-MUTE
IIC-CLK A-TRG
AMS MUTE
LINE MUTE
CONTROL
REC MUTE
CN VSS CNVSS VOLTAGE DETECT DATA R430 100 51
LOD-NEG
C402 R428 C497
TBL-NEG
TBL-POS
SYS RST
VMUTE2
CHK-SW
OC-SW1
OC-SW2
10 220 IC402 0.1 IIC-DATA A-PLAY SWITCH
VMUTE
DSENS
TSENS
RESET RESET RLY
MREQ
50V BD4929G
GND
SW MUTE LOD-POS
D406 D405 R436 R437
D402
1SS355 1SS355 1SS355 10k 10k
R563 R565 (Page 54)
3.3k 10k
Q539
DTC114EKA
D408 R584 Q532 R562
10EDB40 22k Q531 DTA124EKA 5.6k
Q540 DTA124EKA
R432 100
DTA124EKA
42
43
44
45
46
47
48
49
50
Q539,540 D3
C543
C401 MUTING CONTROL
10 R579 R570 R578 R574
10 16V 10k SWITCH 470 100k 47k
R439 10k
50V R444 10k
R445 10k
R446 10k
A2
MUTE2
MUTE1
M-REQ
SYS-R
(E15,SP, MY)
RXD1
TXD1
RTS1
CLK1
Q402
DTC114EKA R433
JR402 0
10k
AC CUT
DETECT R434
10k
C533
1
50V
(E15,SP, MY) (AUS) Q528 C532 Q534

JW122 1
DTC114EKA DTC114EKA
50V
Q529
Q533,534
DTA124EKA Q533
DTA124EKA MUTING
CONTROL
Q530 R566 R569
CD-POWER
Q528-530
R568 DTC114EKA 68k 6.8k SWITCH
68k AMS MUTING
D4
Q536
Q535 DTC114EKA
R573 470k
DTA124EKA
C535
1
m
Q535,536
A4
50V F1
www
MUTING CONTROL
R571 JR103
C534 1k SWITCH 0
1 F2
50V
R575 470k
(Page 56)
E10
E11
E12
E13
E14
. .
E3
E4
E6
E7
E8
E9
(Page 55)
HCD-ZX10D
53 53
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-26. SCHEMATIC DIAGRAM – MAIN BOARD (3/5) –
(Page 52)
8 9 2 4 9 8 2 9 9
B1
B2
B3
B5
B6
B7
(3/5)
NO510
4P
LCH GM L-CH
A.GND
RCH GM R-CH
HP DETECT
D1
(Page 63)
JR131
0 NO511
TEL
TEL
3P
MICIN MIC
MIC_GND
A+9V
(Page 63)
13942296513
13942296513
D2
C516
10 R517 J701
50V 2.2k
13PIN 6P
FB503
0
C530 C531
R559 R561 C524 R525 R530
4.7 10k 10k 4.7 220p 100k 1k L
50V 50V
VIDEO/SAT
C515
10 FB502 0 OUT
R516 C523 R524 R529
50V R
R558 R560 52PIN 2.2k 220p 100k 1k JW520
1k R557 R556 1k
47k 47k 4PIN FB501 0
L
R518 C520 R522 R528 VIDEO/SAT
100 220p 100k 1k
FB500 0 IN
(Page 53) R
C519 R521 R527
R502 IC519(1/2) 220p 100k 1k
62PIN
Q523 Q524 1k NJM4565M L
QQ
QQ
2SC5938 2SC5938
8 3
MUTING MUTING 3PIN PHONO IN
TEL QQ
Q563 2 C514
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
R520 R523 C525
2SC3052 1 100p R
C503 R507 1k 1k 10
+4.5V REGULATOR 0.033 1k 50V
4
376315150 892498299
376315150 892498299
R509 R511
47k 560k
R554 R555 C529 C528
10k 10k 0.1 0.1
R501
1k C508 C510 R513
0.0015 0.0047 1k (CHASSIS)
C500 C502
R500 47 R503 C501
47 C506 C513
330 16V 1k 0.01 R505 JR118 C505 R515 C518 C522 C527
16V 100k 0 0.01 100 2.2 47k 100p 330p 0.1
16V 50V
C526
C512 10
R526
2.2 50V J202
1k
50V 1P
D3
R514 C517 C521 SUBWOOFER OUT
C507 PHONO AMP C509 R512 47k 100p 330p JR270
D4
0.0015 0.0047 1k 0
R223 R227 R232 R504
10k 10k 10k 100k
C257 R278 R279 R280
10 1k 47k 1k
R508 R510 50V
47k 560k
C504 R506 6
0.033 1k R519 R276 Q270
63PIN 7 C511
5 100p 1k 10k 2SC5938
Q202 Q203 Q204
MUTING
2SC5938 2SC5938 2SC5938
R277 R281
MUTING MUTING MUTING IC519(2/2)
10k 100k
NJM4565M
R221 R222 R225 R226 R229 R231 C259

1k 47k 1k 47k 1k 47k 0.1 CN502
G1 7P
C-RY CENTER-RY
G2 R224 R228 R234
10k 10k 10k
CENTER
CENTER GND
(Page 55)
REAR-RY REAR-RY
REAR-L
REAR GND
(Page 61)
IC-2
IC-4
IC-3
REAR-R
IC-1
www m
H1
H2
(Page 56)
. x ia o y u 1 6 3 . c o
HCD-ZX10D
54 54
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-27. SCHEMATIC DIAGRAM – MAIN BOARD (4/5) – • See page 75 for IC Block Diagrams.
(Page 53)
8 9 2 4 9 8 2 9 9
E10
E11
E12
E13
E14
E3
E4
E6
E7
E8
E9
(4/5)
TABLE LOADING
MOTOR DRIVE MOTOR DRIVE
+12V REGULATOR
IC514 IC515
BA6956AN BA6956AN
Q552 IC516
RT1P137P PQ12RF21
B+ SWITCH +5V REGULATOR
IC513
TA7805LS
O I
R302 R307 R328
C302 47 25V
C306 47 25V
1k 15k 0 G
C303 0.1
C307 0.1
CN509
R315 10
R314 10
11P R300 C300 R317
OCSW2 R311 100 46 100k 0.01 1k
Q554
C342 C541
DTC114EKA C341 C540 C542
OCSW1 R312 100 45 R303 R301 R308 C304 1000 0.1 0.1 2200 0.1 R577
B+ SWITCH 6.3V 16V
100k 47k 33k 0.01 10k
CKSW1 R313 100 44
TEL
TEL
SGND
L300
48
47
50
49
SENSOR LED R304 75 10µH Q506 CD-POWER
Q506,509 DTC114EKA
TSENS R305 47k 42
CD/DVD POWER Q509
DTC114EKA
DSENS R316 100 SELECT SWITCH
43
LM-
R310 R318
13942296513
13942296513
LM+ 47k 100
(Page 50)
TM+ C305
C539 I2
0.1
TM- R306 1
50V
56k
(E15,SP, MY)
C301 R309
CN508 0.1 1k
13P C536 FB582
0.1 0
AUDIO_GND
Q870 Q538
2SC1623 DTC114EKA
Q537
(AUS) FB582 LEVEL SHIFT DTA124EKA
AUDIO_5V
R576
DGND Q537,538 470k
FB583 MUTING CONTROL

V+5V C538 R567 R572
1 SWITCH
68k 15k
VGND 50V A1
(AUS)
DGND
DGND (AUS) JW587

FB583
0
D+3.3V
C544
0.1
D+3.3V (E15,SP, MY) FB580
QQ
QQ
C584 I3
0.1
(Page 42) DGND
TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
D+5V
+5V REGULATOR +3.3V REGULATOR
MGND C583
C580 47
(AUS)
47 50V +9V REGULATOR
M+12V
(E15,SP, MY)
50V
376315150 892498299
376315150 892498299
IC517 IC518 IC510
0
SI-8050JF SI-8033JF TA7809LS

FL584
FL585
FB585
FB584
I O
NO581 VIN D580 VIN D581 G
6P RK36 RK36
JR471 C592
SW OUT SW OUT 0 6800 C595
25V 0.1
(AUS) GND GND
VOS VOS
C545
0.1 R581 R583
ON/OFF ON/OFF
820 820
L580 R580 L581 R582 +9V REGULATOR

100µH 47 100µH 47
IC511
TA7809LS
I O
NO580 C582 C585 G
6P 1000 3300
JW526
D502 D501 (Page 56)
6.3V 6.3V D5SBA20 1 D3SBA20 1
2 3 2 3
4 4
C599 C596 C597 C598 C594 C590 C591
4700 100
0.01 0.01 0.01 0.01 0.1
25V 10V
I-HOLD
CN506
13P (E15,SP, MY)
JW552
-VG -VG
DGND VF2
VF
Q590
VF VF1 FA1L3Z
I4
OVER
AC4
VOLTAGE I5
AC4
DETECT I6
AC3
D329 R591
1SS355 1.8k
AC3
A+9V
R590
56k
NC
(Page 58)
FRONT RELAY FR-RY
AC CUT DETECT
STK MUTE S-MUTE
CN505
13P
UNREG-V
-B(-VL)
I7
-B(-VL)
POWER GND
m
POWER GND
www
HP MUTE H-MUTE
DBFB FEEDBACK
PROTECT PROTECT
R-IN
G2
A-GND
(Page 58)
. .
L-IN
G1
FAN DET
FAN ON (Page 54)
HCD-ZX10D
55 55
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-28. SCHEMATIC DIAGRAM – MAIN BOARD (5/5) –

8 9 2 4 9 8 2 9 9
H1
H2
C1
C2
C3
C4
F2
F1
(5/5)
ELECTRICAL VOLUME
IC501 C231
M61530
1
50V
IC-1
C213
0.22
R218 2.2k
C211 0.1
TEL
TEL
R217 1k
C243 220p
IC-2 C201 10 50V R253 470 CLK2
IC-3 C205 10 50V R252 470 DATA2

13942296513
13942296513
C242 220p
R215 C223
620 0.39
Q201 R207 C222 C230

2SC1623 10k 0.18 10 50V
31PIN
FEED BACK C204
10
R201 SWITCH 50V R243 C229
47k 47k 10 50V
IC-4 ZIVA-LFE
C228 0.001
R214 C221
620 0.39
ZIVA-CTR
Q200 R206 C220 R242 C240 R259 R251

C247
2SC1623 10k 0.18 4.7k 0.001 10k 2.2k 10
R200
FEED BACK 50V
47k
SWITCH C239
10
FR C210 10 50V R213 0 50V C227
0.001
R212 1M
C200
100 ZIVA-SR
QQ
QQ
10V
R211 1M
QQ
R241 C238 R258 R250
TEL
4.7k 0.001 10k 2.2k C246
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
FL C209 10 50V R210 0 10
50V
C237
10
50V
376315150 892498299
376315150 892498299
C241
C219 R249 R240 10
100 10V
47k 47k 50V
LINK-R
C218 R239
0.001 4.7k
DM-L C208 10 50V ZIVA-SL
R204 47k
R209 C215 R220 C236 R248
2.2k 0.0022 2.2k 0.001 R257 2.2k C245
DML-OUT C207 10 50V 10 C251
10k
50V 220 CN513
C235 10V
C217 C586 3P
10
DMR-OUT C203 10 50V 0.001 50V 0.1 FAN+
R202 47k C233 FAN- M501

R205 C212 R216 R247 R245 10
(FAN)
2.2k 0.0022 2.2k 47k 47k 50V
DM-R C202 10 50V LINK-L
C216 R244 R256

220p 10k 470
ZIVA-FL C206 10 50V ZIVA-FR
R203 47k
R208 C214 R219 C226 C232 C244 R260
470 220p 10k 0.001 220p 220p 47k C248
10
50V
CN503
21P
LFE-IN SW(LFE)
A-GND
SR-IN SURROUND-R
A-GND
SL-IN SURROUND-L
A-GND
C-IN CENTER
I2
A-GND
FR-IN FRONT-R
C292
C587 R293 4.7 A-GND
0.1 1k 50V
14PIN FL-IN FRONT-L
DM-R
DM-L
R233 R237 R254 R262 R265 R268 R271 R274

ZIVA-SR
ZIVA-FR
ZIVA-SL
ZIVA-CTR
ZIVA-FL
1k 1k 1k 1k 1k 1k 1k 1k
ZIVA-LFE
A-GND
ALOG
Q553
DM-R DOWNMIX-R
2SD2525
R294 R290
A-GND (Page 47)
D553 D554 47k 10k
UDZS-6.2B UDZS-7.5B DM-L DOWNMIX-L
R586 R288 Q290 Q293
4.7k 10k 2SC5938 DTC114EKA AUDIO_GND
Q205 Q206 Q207 Q208 Q209 Q210 Q211 Q212
MUTING
2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 2SC5938 AUDIO_5V
R291 Q292
MUTING MUTING MUTING MUTING MUTING MUTING MUTING MUTING
Q555 10k C293 DTA124EKA
R585 2SC1623 4.7 ANALOG-IN-R
4.7k R295 50V
51PIN Q292,293 A-GND
(Page 55) R230 R235 R236 R238 R246 R255 R261 R263 R264 R266 R267 R269 R270 R272 R273 R275 R289 Q291 47k R296 R297
JW530
Q553,555,557
2.2k 10k 2.2k 10k 2.2k 10k 2.2k 10k 2.2k 10k 2.2k 10k 2.2k 10k 1k 10k 10k 2SC5938 68k 15k MUTING CONTROL
ANALOG-IN-L
FAN MOTOR DRIVE C255 MUTING R292 SWITCH
1k
m
C224 C225 C234 C249 C252 C253 C254 1 A-GND
www
1 1 1 1 1 1 1 50V
50V 50V 50V 50V 50V 50V 50V
LFE-IN
I3
SR-IN
DM-R
FR-IN
SL-IN
DM-L
FL-IN
C-IN
R587
100k Q557
R588 2SC1623
I4
4.7k EPT501
R298
I5
470k
I6
. .
I7
(CHASSIS)
HCD-ZX10D
56 56
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-29. PRINTED WIRING BOARDS – FRONT AMP SECTION – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4
8 9 2 4 9 8 2 9 9
5 6 7
FRONT R
8
SURR R CENTER
TM608
SPEAKER
9
FRONT L
10
SURR L
11
A (CHASSIS) – + – + – + – + – +
POWER BOARD
C690
R636 C636
E EP608
Q641
C695
R643
C694
C692
C691
C693
R642 E
JW725
JW688
L688
Q640
C637
R637
R641 R640 R688 JW727
B R638 (AUS) JW726 (AUS) JW724
R639 C634
JW684
R693 R635 C635
L684
Q635 JW719
R634
R623 (AUS)
E E R684
JW715
Q634 R673 JW720
JW718
JW686
R626 D624
JW716
JW717
(AUS)
L686
R674
R682
JW680
R686
JW722
JW721
R665 R625
L680
R624
C
TEL
TEL
R680
L682
(AUS)
JW696
JW711
JW712
JW713
JW682
SENSOR BOARD
JW714
JW697
JW707
CN605
13942296513
13942296513
TH630 R655
1 2
D655 RY646
-1
D646
D 1-861-388-
11
(12)
D654 -2
JW723
R646
JW710
JW708
• Semiconductor E E E R654
R631 R644
Location Q630 Q628 Q629 JW706 Q644
R629
R633
R630
R628
Ref. No. Location JW728 E
R652
R632
JW705
R651
C651
S R650
D609 G-4 GAME/HP BOARD
R692 E
R617
C654
D611 E-7 E CN803 JW709
R699
IC600 JW628
Q647
(Page 62) R647
NO609
QQ
QQ
D612 E-6 22 1
C609
QQ
1 3 C616 1
D620 G-5
TEL
C652 C604 JW704
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
2
JW614 D612
JW619
JW610 R602 C601 D611
D624 C-6 JW611
R653 R601 R612
NO604
JW703
D627 H-4
376315150 892498299
376315150 892498299
JW629
C617
JW729
R603
D646 D-9
JW624
JW625
JW626
JW627
CN606
JW615
JW616
JW617
JW612
JW618
JW621
JW622
JW623
C655
JW613
JW620
JW609 JW702
D654 D-8 CN601
C650 C666
C616
10
R613
R614
JW701
D655 D-8 F 1
D656 H-9 JW639 JW700
JW635
JW633
C600 R622 R672
JW637
D658 H-5 C602
JW601
JW602
JW607
JW608
R600
JW603
JW604
JW605
JW606
D660 G-10 R668 R618 R616 V
R619
JW640 SURROUND
R669
D661 G-10 BOARD
JW689
JW698
C648
JW699
JW651
C608 Q610 JW646
JW631
JW630
NO700
JW634
JW632
JW636
R694 JW641
D664 H-10 Q
JW638
(Page 60)
D609 E Q618 Q668
MAIN JW642
D670 G-5
JW600
R620 1
R621
BOARD R610 JW643
E Q648
CN505 R611 E E
JW644
(Page 51)
G C610 R670 R671
R649
IC600 E-6 JW645
JW649
JW648
JW650
JW656 R609 JW653 R615
D620 D670 D660
R698 R691
IC627 H-4 13 JW657 R608
JW654
D661 C649
JW652
JW655
R660
R661
JW687
Q604 H-4 Q604
E
R605 JW730 R664
R604
Q606 H-4 E C628
JW677
JW659
Q606
JW678
C656
JW676
JW685 B
JW671
C658
CN602 R606
Q610 G-5 R607 C
JW670
Q664
JW664
R690
R663
JW661
JW660
1
Q618 G-5 D627 1 E
C629
R662
JW658
JW665
JW666 3 1 R658
Q628 D-6 H JW667
C627
Q629 D-6
JW673
JW674
JW675
4 6
R659
Q630 D-6 IC627 D664
JW679
C679
JW668 C662
Q634 B-5
C605
P 4 D656 1
JW681
JW669
JW683
R657
R656
Q635 B-5 MAIN C663
BOARD JW647
Q640 B-5 CN506 EP605 C659
(Page 51) C678 C676 NO607
Q641 B-5 JW672
4
6 C657
Q644 E-9
I D658
R676
13 JW732
Q647 E-9 C677
R677
R679
R678
Q648 G-10
JW662
JW731
Q664 H-10 NO603
CN600 7
Q668 G-5 1 5
1
JR647
www m
1
J
11
. .
1-861-387- (12)
SURROUND BOARD TRANS BOARD TRANS BOARD

(CHASSIS) R NO701 U CN1112 T CN1113
HCD-ZX10D
57 57
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-30. SCHEMATIC DIAGRAM – FRONT AMP SECTION (1/2) –
(1/2)
8 9 2 4 9 8 2 9 9
R637
C637
4.7 680
2W
100V
Q634
DTA124EKA R693 R640
2.2k 10k
POWER AMP
IC600 Q640
C634
STK412-230 100 2SC3661
R634
Q634,635 25V MUTING
2.2k NO609
MUTING 3P
C635
R635 R642
CONTROL 100 10k 56 HP-R
25V
SWITCH
HP-GND
Q635
DTC114EKA
HP-L
R641
10k
(Page 63)
R618 Q641
0.22 2SC3661
5W R638 R639 R643
R636 MUTING
100k 100k C636 680 56
4.7
TEL
TEL
2W
100V
C604
RY646
100p
R616 -2
1 R619
1k Z1
13942296513
13942296513
-1
R612 Z2
100
C601 0.0022
R601 47k
R646 R654 R655

R603 R692 47k 47k
R673 68k
R623 56k
R674 22k
R624 22k
100
C616
0.068
47k 100k 1W
R600
UDZSTE-18B
UDZSTE-18B
1k D654 D655
R617 Q610 D646 1SS355TE 1SS355TE
D612
D611
C617
0.068
100k 2SC3906K 1SS355TE
R615 Q618
100 2SC3906K
R699 R622
100k
10
R620 Q644
R602 C608 15k 1/2W 2SC2412K-T
22
220 R621 R625 -146-R R647
50V C610 C609 150k 1.5k 1.5k
22 22 RELAY
1SS355TE
R614 R613 Z3
C600 100V 100V
D620
EP605 4.7 C602 1k 1k DRIVE
C605 100 R611 1W 1W R671 R665 Q647
50V
0.01 10V 33k 150k 1.5k 2SC2412K-T
-146-R
QQ
QQ
PROTECT
(CHASSIS) D670 SWITCH
QQ
C652 R672
TEL
R694 R610 1SS355TE Q648
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
100 10
10V 68k 68k 2SC2412K-T
1/2W
Q604,606,610 -146-R
(Page 59)
0.0022
STANDBY OVER LOAD

R652 D609 R609 R670 Q668 C649
376315150 892498299
376315150 892498299
220 SWITCH 1SS355TE 68k 15k 2SC3906K R644 JR647 DETECT R649
R651 47k
C648 10
C667
0.068
R653 2.2k 0 12k
47k 100 50V
C651
10V
Z4
C654 R669
C666
0.068
100p 1k Q618,668
R690 R668
OVER LOAD
47k 0.22
5W DETECT
R650
1k R606 R608 R691 R698
Z6
47k 100k 100k 100k
C650 R604
10k
4.7
50V Z7
Q604 Z8
2SC2412K-T
R605 -146-R R607 Q606
10k 2.2k 2SA1207
Z9
CN600
5P
CN602
STK MUTE 13P
OVERLOAD DETECT -VG
DC DETECT DGND
PROTECT JW647 VF1 VF
UNREG-V VF2 VF
(Page 61) AC1 AC4
CN601
AC2 AC4
13P R633 R632
FAN ON 47k 560k AC3 AC3
FAN DET AC4 AC3
L-IN A+9V
A-GND R628 R630 R631 NC

33k 100k 100k
(Page 55)
R-IN FRONT RELAY
PROTECT AC CUT DETECT

R626 D624
100k 1SS355TE Q630
DBFB FEEDBACK STK MUTE
2SC2412K-T
-146-R
HP MUTE C655
10
POWER GND 50V
(Page 55) NO603
POWER GND Q628
R629 7P
2SC2412K-T
100
-B(-VL) -146-R AC2 AC4
-B(-VL) Q629 AC1 AC4

Q628,630
2SC2412K-T
JW662
UNREG-V AC3 AC3
THERMAL -146-R
DETECT FAN MOTOR AC4 AC3
SWITCH
VP
VF1 VF
OVER CURRENT
(Page 73)
m
PROTECTOR
www
IC627 VF2 VF
Q664
RT8H015C-TH12-1
B1565E
C629 C628 C627
100 2.2 -33V REGULATOR
0.1
16V 50V R662 R663 R664
8.2k 8.2k 1k
CN605 NO604 D627
2P 2P 1SS355TE
C662 C663
10 D664 100
. .
UDZS-TE17-33B
TH630 50V 50V
The components identified by mark 0 or dotted

HCD-ZX10D
58 58 Replace only with part number specified.
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-31. SCHEMATIC DIAGRAM – FRONT AMP SECTION (2/2) –
8 9 2 4 9 8 2 9 9
(2/2) EP608
(CHASSIS)
JW682
(AUS)
R682 10
L682
SURR L
L680
R680 10 JW720
FRONT L
JW699
TEL
TEL
Z1
JW680
Z2
JW684
(AUS) JW689
13942296513
13942296513
R684 10
L684
TM608
CENTER
SPEAKER
JW698
JW688
(AUS)
Z3
R688 10 JW726
SURR R
D660 D661
1SS355TE 1SS355TE L688
L686
FRONT R
R686 10
R660 R661
QQ
QQ
12k 12k
QQ
(Page 58)
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
JW686
376315150 892498299
376315150 892498299
Z4
Z6
C695 0.01
C694 0.01
C693 0.01
C692 0.01
C691 0.01
C690 0.1
Z7
Z8
Z9
2 3
1 4 1 4
NO607
3 D656 2 D658 6P
C656 C657 C658
3300 R656 R657 RBV-2506 0.1 3300 R658 R659 RBV-2506 C659 VH(AC)
220k 220k 220k 220k 0.1
100V 100V 63V
VH(AC)
GND
C679 GND
0.1
C676 C677 C678 VL(AC)
3300 R676 R677 0.1 3300 R678 R679
220k 220k 220k 220k
100V 100V 63V
VL(AC)
(Page 73)
CN606
10P
CENTER
C-GND
REAR L-CH
REAR GND
REAR R-CH
www m
SURR GND
-VL
+VL
(Page 61)
-VH
+VH
. .
HCD-ZX10D
59 59
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-32. PRINTED WIRING BOARD – SURROUND BOARD – • See page 35 for Circuit Boards Location.
1 2 3 4 5 8 9 2 4 9 8 2 9 9 6 7
MAIN BOARD
CN502 N
SURROUND BOARD (Page 51)
A IC701 R796
C771 C770 D791

C743 C753 C703 D790 JW702 R793
R742
R792 JW721
R702
R741
R712 JW703
R799 C742 R752
R770 JW704
JW744
JW737 JW722
R798
R775 R780 R730
JW738
R710 • Semiconductor
TEL
TEL
C752 R794
R750
C796 R797
JW755 Location
JW758 R711
R795
C702 Ref. No. Location
JW700
R771 C751 JW707
13942296513
13942296513
R740
C741 R701 D720 B-6
JW706
JW705
B
R727
JW748 D730 D-6
Q722
R772 R751 C701 D760 D-3
R700
C740 C721
JW745 C750 C795 D761 D-4
D770 E D762 D-3
R737
Q770
R729
JW756 D770 B-2
E 7 NO702 1 R726
D720
D780 C-3
R724
R725
C792
C700 JW708 R736 D790 A-5

JW739
R784 D791 A-5
JW746
C791 JW709 R722

R773
JW740 E
R766
R781 R728
JW710 Q721 IC701 A-4
R782
R768
QQ
QQ
C781 JW725 JW724
E JW711 R723 Q720 Q720 C-6
TEL QQ
JW759
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
R774 JW712 Q721 C-6
JW749 E E
D780 Q780 C780 Q722 B-6
376315150 892498299
376315150 892498299
JW750 Q762 Q765 Q763 R721 Q730 A-6
E
C EP790 E
Q764 JW727 C730
Q762
Q763
C-3
C-3
JW741
R720 Q764 C-3

E R785 Q765 C-3
R790 Q770 B-2
Q780 C-4
R783
(CHASSIS) R788 C731

JW742 -2
JW714
R734
R764 D761
RY760
-1
JW729 R735
R732
D R765 JW728 JW715 E
R731
RY761 JW791 JW716 D730
-1
JW731 JW717 R733 Q730
JW760
D762 JW732 JW718

JW743 11
D760 JW733
-2 1-861-383- (14)
JW734
NO701 JW762
JW751 5 1 JW735
JW747
JW753
JW736
JW761
JW754 JW752 JW719

NO700
10 1
m
E
www . x ia o y u 1 6 3 R
POWER BOARD
CN600
(Page 57)
V
POWER BOARD
CN606
(Page 57)
. c o
HCD-ZX10D
60 60
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-33. SCHEMATIC DIAGRAM – SURROUND BOARD –
8 9 2 4 9 8 2 9 9
POWER AMP
IC701
STK413-430
TEL
TEL
R799
100k
R798
100k
13942296513
13942296513
R792 D791
NO702 C700 100k UDZ-TE-17-18B
7P 4.7 R700
50V 1k
REAR-R
NO700
REAR GND
C703 R793 10P
100p R730 1
REAR-L 0.22 -1 CENTER
5W
REAR-RY C-GND
R710
-2
CENTER GND ∗ REAR L-CH
C701 0.0022
CENTER REAR GND
(Page 54) CENTER-RY R731 REAR R-CH

R701 ∗
R794
1k R764
100
100 RY760 SURR GND
50V
1W
UDZ-TE-17-18B
-VL
R702
C750 4.7
220
D790
+VL
Q722 R732 Q730 C730
2SC3906K 15k 2SC3906K 0.068 (Page 59)
-VH
R795 D761
QQ
QQ
100 OVER LOAD 1SS355TE
C702 +VH
DETECT C731
QQ
1SS355TE
100
TEL
10V 0.068
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
D730
R727 C721 R733
C791 0.01
33k 22 50V C795 C796 R796 R797 150k R735

R750 1k
22 22 1k 1k 10 -1
100V 100V 1W 1W 1/2W
376315150 892498299
376315150 892498299
JW791 -2
R783 150k R785

EP790 R736 R726 10
68k 68k
D780 1/2W
1SS355TE
0.0022
R765
D720
1SS355TE 100 RY761
C752 1W
R751 ∗
(CHASSIS) R782 Q780

100
C781
0.068
15k 2SC3906K
C751
10V
D762
OVER LOAD
1SS355TE
R752 R711 DETECT
220 ∗
C753
C780
0.068
100p
R725 R780
68k 0.22
R781 5W Q763 Q762
1k 2SC2412 2SC2412
R737 R724 R729
100k 100k 100k RELAY RELAY
R740 C743 DRIVE DRIVE
C740 1k 100p Q720-722 R770
4.7
STANDBY 0.22
50V
SWITCH 5W
∗ R701,710-712,741,751 R790 Q764 Q765

1.5k 2SC2412 2SC2412
47k (E15,SP,MY) R712
PROTECT PROTECT
56k (AUS) ∗
C770 R768 SWITCH SWITCH
0.068 2.2k
∗ C741 R728 R771
0.0022 (E15,SP,MY) 47k 1k
R788 R766
0.001 (AUS) 1.5k 2.2k
R784 68k
R734 56k
R774 47k
R722
47k
R772 C771
15k 0.068
Q721 Q770
2SA1207 2SC3906K
C792 C741 R741 R742
OVER LOAD
0.01 ∗ ∗ 220
DETECT R773 R775
10
150k
C742 Q720 R723 D770 1/2W
100 2SC2412 2.2k 1SS355TE
10V
R720 R721
10k 10k
NO701
5P
UNREG-V
PROTECT
D760
1SS355TE DC DETECT
-17
OVERLOAD DETECT
STK MUTE
(Page 58)
www . x ia o y u 1 6 3 . c o m The components identified by mark 0 or dotted

HCD-ZX10D
61 61
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-34. PRINTED WIRING BOARDS – PANEL SECTION (1/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4 5 8 9 2 4 9 8 2 9 9 6 7 8
MIC BOARD GAME/HP BOARD
C822
C820
C834
R824 C832 C824
A RV802
R819
D801
C825 CN802
JW810
ECHO LEVEL
C819
C826 IC851 H
2 VIDEO
R817 R820 R1344 1

1 16
R815 VIDEO BOARD (E15, SP, MY) C842
R818
R816
CN1201
(Page 48) EPT803
EPT801 R825
R821 (CHASSIS) C843
C827 J850
C821 C823 8 9
L GAME
(CHASSIS) R828 R830
TEL
TEL
INPUT
JW830
4
C818 C830 JW811
R807 R822
C833
L R827 R829
JW827 C828 MAIN BOARD 1 AUDIO
R823 C829
13942296513
13942296513
B RV801
MIC LEVEL
C831
NO510
(Page 51) CN801
EPT804
(E15, SP, MY) R
C809
JW822 JW823 C840
(CHASSIS)
R826
C802
C841
JW919
R804
QQ
QQ
C812
R814
QQ
CN803
J801
TEL 1 3 9 4 2 2 9 6 5 1 3 3 S7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
R806
C807 3
MIC 1 JW821
C
376315150 892498299
376315150 892498299
C817 J851
PHONES
R809 C810 IC850 C804 POWER BOARD
1
JW812
R805 R801 NO609
R808
R813 1 8 (Page 57)

C811 C806
1
C813 4 5
R812 R802
3
M 11
R800 MAIN BOARD 1-861-386- (14)
C814 R810 JW820 CN920 NO511
C815 (Page 51)
J802 R811 R803 C801

MIC 2
C805
D
JW828
EPT808 1
2
C808 11
CN930
1-861-391- (13)
PANEL BOARD
(CHASSIS) W NO931
(Page 64)
HCD-ZX10D
62 62
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-35. SCHEMATIC DIAGRAM – PANEL SECTION (1/5) – • See page 75 for IC Block Diagrams.
8 9 2 4 9 8 2 9 9
C804
150p CN802
2P (E15,SP,MY)
R805 MIC AMP GM-SIG C842 EPT803

150k C814 0.1
IC850(1/2) GM-GND JW810
C809 NJM4565M C811 2.2 R813
R807 2.2 47p 50V 1k
3
100 50V 1
IC850(2/2)
C807
2 (Page 49) (CHASSIS)
C802 R806 2.2 J801
NJM4565M
C813
0.001
R804 2.2 10k 50V R812 R814 C817
6 4 MIC 1
100 50V RV801 1k 10k 0.01
7 J850
CN920 5 50k 3P
3P C806
MIC LEVEL
MIC 8 47p CN801
R808 R810 4P
VIDEO
R801 47k 100k
MIC_GND 100k R800 GM L-CH R828 R830
0 100k 1k GAME
A+9V C810 R809 A.GND JW811
INPUT
470p 1k L
GM R-CH
R827 R829
100k 1k AUDIO
(Page 54) HP DETECT
R
C812
TEL
TEL
1 (Page 54)
50V (E15,SP,MY)
J802
CN930 R811 C815 C840 C843
MIC 2 EPT804
2P R803 10k 0.01 0.1 0.1
MIC_GND 10k
MIC DETECT
13942296513
13942296513
C841 (CHASSIS)
R802 C801 C818 EPT801 0.1
220
10k 0.1
16V
(Page 65) R826
100
C805 C821 C828 C831
10 1 R817 C824 0.47 0.47
22k 0.0068 (CHASSIS) CN803
50V 50V 50V 50V
3P
HP-R
R819 R820 C833
22k 22k 0.15 J851
HP-GND JW812
PHONES
R815 C808 EPT808 HP-L
15k C826 0.1
0.068 R825
C823 47k
0.001
C819
2.2 (CHASSIS) (Page 58)
50V
NC
LPF1IN
LPF1OUT
OP1OUT
OP1IN
CC1
CC2
GND
QQ
QQ
TEL QQ
DIGITAL ECHO
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
LPF2OUT
OP2OUT
LPF2IN
CLOCK
OP2IN
VCC
REF
NC
IC851
376315150 892498299
376315150 892498299
M65850FP
C830
R822 22k 0.001
R818
120k
C834
0.022
R823
22k
C827 R821 RV802
R1344
C832
330
R816 0.068 22k 1 50k

330
50V ECHO LEVEL
UDZS-TE-17-5.1B
R824
C822 C825 15k
D801
C820 47 47 C829
0.1 10V 10V 0.0068
HCD-ZX10D
63 63
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-36. PRINTED WIRING BOARD – PANEL SECTION (2/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location.
1 2 3 4 5 6 8 9 2 4 9 8 2 9 9 7 8 9 10
PANEL BOARD
R1350 R941
A R940
D905 FL901
C922 FLUORESCENT INDICATOR TUBE C944
1 9 63
JW966
JW967
D906 8 62 70
Q908
D906, S921
R899
R897
R898
JW986
JW985
JW984
JW983
JW982
JW981
JW980
JW979
JW978
JW977
JW976
JW975
JW974
JW973
JW972
JW971
JW987
E TUNER/BAND D903 C942 R990
JW1003
R942 C941
D901 D902 NO910
D900
S921 JW999 S903 S928
JW895 1
DISPLAY
JW942
JW941
R959 SLEEP
C928
C930
C936
C939
C925
C927
C929
C932
C933
C940
C931
C934
C935
C937
C926
C938
R983 C924
X
JW970
JW969
B JW1005 JW1004
C900
C923 31 30
TEL
TEL
JW1002
JW896
JW1001
R984
JW1000
JW1016
JW903
SET CLOCK TIMER SELECT
JW902
JW900
JW901
JW899
4 POWER SW
BOARD
R985 NO912
C904
JW998
(Page 66)
JW968
R901
IC901 Q902
C905
R902
50
13942296513
13942296513
S923 TUNING S922 R900 S901 S902
JW994
JW993
JW990
JW989
JW996
JW995
JW991
JW988
JW997
JW992
+ – C903 E R958
R986 1 Q901
JW1006 51 R939
JW897
R957
JW898
JW1007
R903 E
R956
R904 R938
100
C910 S900
ILLUMINATION
R987
C
JW879
JW876
JW875
JW874
JW867
JW866
JW863
JW878
JW865
JW864
JW877
JW834
JW835
JW833
S925
JW840
JW838
JW837
JW836
S924
JW839
MEMORY R922
JW832
JW831
TUNER R988 JW892 80 81 X601
ENTER JW862 C918
R1351 3
C921
IC902
JW870
R989 JW1014
R908
R909
C953
C951
R905
R906
C955
C957
C949
R907
R910
C917
C919
QQ
QQ
S927 R944 1
QQ
JW842
JW841
TEL
TUNING MODE JW860 JW885 FB901
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
R947
R949
R952
R950
C961
JW868
JW893 JW861
R1352
R919
JW943
R916
S926 R918 JW951 NO909
R953
(E15, SP, MY)
376315150 892498299
376315150 892498299
FM MODE R917 C920
R911 C946 JW944 7
JW847
JW844
R912
R915
R914
C916
R913 20 11 C959
R954
C948
JW905
C958
D C973 C960 Z
JW859
CNS928 JW950
JW843
8 1 C956
JW957
JW824
JW881
JW945
JW1008
R945 TC-A
JW1009
JW916 C954
JW880
JW884
R946 R951 BOARD

JW939
JW917 1 10 C952
JW849
JW848
R948 1 CN915
IC903
JW846
JW845
JW1011 C945
JW918 (FOR CHECK) C950 (Page 68)
JW947
JW953
JW946
JW1010 C947
JW952
D904 JW915
1 R999
JW956
JW850 JW949
JW887 D927
JW958
JW886
JW955
JW954
JW959
JW960
NO917 1
JW888
JW948
JW851
JW889
E E JW890
JW852 Y
E E JR921 C966 JW853 JW856 JOG
JW1012
Q905 Q903
JW1013
E 9
Q904 Q906
R994 R998
JW891
EPT805 JW854 JW857
5 BOARD
NO922
CN908
JW855 JW858 (Page 68)
R993
JW961
JW963
JW962
R997
JW964
NO931
CN906
JR918 FB931 2 1
JR916 CN913 11
1-861-397- (13)
S900 – 903,
(CHASSIS)
BB TC-BCN916
BOARD S921 – 928
J MAIN BOARD
CN507 AA VOL BOARD
NO924 W MIC BOARD
CN930
F (Page 70) (Page 51) (Page 66) (Page 62)
• Semiconductor Location
Ref. No. Location Ref. No. Location
D900 B-4 IC902 C-9
www m
D901 B-3 IC903 D-7
D902 B-4
D903 B-3 Q901 C-8
D904 D-4 Q902 B-8
D905 A-3 Q903 E-3
. . D906
D927
A-2
D-4
Q904
Q905
Q906
E-2
E-3
E-2
IC901 C-5 Q908 B-1
HCD-ZX10D
64 64
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-37. SCHEMATIC DIAGRAM – PANEL SECTION (2/5) – • See page 74 for Waveforms. • See page 75 for IC Block Diagrams. • See page 79 for IC Pin Function Description.
8 9 2 4 9 8 2 9 9 JW915
FL901
FLUORESCENT INDICATOR TUBE
Q902
DTC143TKA
-T146
GRID DRIVE
100
NO910 Q901
99
98
97
96
95
94
93
92
90
89
87
86
4P
88
91
43
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
22
21
20
19
18
17
16
15
14
13
12
10
DTC143TKA
1
9
5
EVER 4V -T146 C944
10
GRID DRIVE
D GND 50V
LED STBY LED-S
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
330p
KEY POWER KEY-P C922
10
C924
C925
C926
C927
C928
C929
C930
C931
C932
C933
C934
C935
C936
C937
C938
C939
C940
C941
C942
50V
(Page 67)
R941 R942
100 100
C900
R938 R939 D905
4.7
100k 100k UDZS-TE-17-5.1B
50V
TEL
TEL
NO931
2P
MIC_GND
R999
R945 47k
R946 68k
CNS928 0
MIC DETECT
8P R948 R951 R954
R1350 22k
R940 22k
6.8k 5.6k 10k
MD0 49
1
30
29
28
27
26
25
24
22
21
20
19
18
17
16
15
14
13
12
10
13942296513
13942296513
MD2 51 (AUS)
(Page 63)
0.0047
0.0047
C954 0.022
C956 0.022
C958 0.047
C959 0.047
C945 1
C947 1
INT0 52
FB931
(E15,SP,MY)
INT1 53
C950
C952
FB931
(FOR CHECK) SI0 54 0
S00 56
SEG-23
SEG-22
SEG-21
SEG-20
SEG-19
SEG-18
VDD-FIP
SEG-17
SEG-16
SEG-15
SEG-14
SEG-13
SEG-12
SEG-11
SEG-10
SEG-9
SEG-8
SEG-7
VSS-IO
SEG-6
SEG-5
SEG-4
SEG-3
SEG-2
SEG-1
G1
G2
G3
G4
SEG-24
VCC-CPU
GC DGND 31 100
IN1
IN2
BUF1OUT
BPF2IN1
BPF2IN2
BPF3IN1
BPF3IN2
BPF4IN1
BPF4IN2
GND
SEG-25 G5
32 99
SEG-26 G6 BAND-PASS
BUF2OUT
BPF1OUT
BPF2OUT
BPF3OUT
BPF4OUT
EPT805 33 98
BPF1IN1
BPF1IN2
RECOUT
C966 FILTER
SEG-27 G7
0.1 34 97
VCC
SEG-28 G8 JR918
NC
35 96
IC903 0
SEG-29
(CHASSIS) CN908 G9 NJM2760
5P 36 95
SEG-30 G10 CN906
SPK MODE LED 45 37 94 21P
SEG-31 G11
JOG A 75 38 93 VF
QQ
QQ
SEG-32 G12
JOG B 76 39 92 VG
QQ
C946 470p
C948 470p
SEG-33 G13
TEL
R947 1k
R949 1k
R950 1k
R952 1k
R953 1k
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
+VL 9V 40 91 VF
SEG-34 G14
LED GND 41 90 VG
SEG-35 DISPLAY CONTROLLER G15
(Page 69)
376315150 892498299
376315150 892498299
89 MIC DETECT
IC901
VSS-IO G16
43 MB90M407PF-G-142 88 61 I2C CLK
-BNDE1
SEG-36 G17
44 D903 1SS355 87 60 I2C DATA
74
70
71
72
73
TAPE A LED G18
45 D901 1SS355 86 EVER 4V
SPK MODE LED G19
C961
46 D900 1SS355 SIRCS
CD LED NO USE 4.7 C949 C951 C953 C955 C957
VOL 11, TUNER BAND
50V 1 1 1 1 1
47 D902 1SS355 C917 0.01 JW905 D GND
GAME , REC LED VCC-CPU
D GND
VKK XIN
49 D+4V
LED SELECT
TAPE B LED
MD0 XOUT
SOFT TEST
C904
ALL BAND
SPEANA
BPF1-F01
BPF1-F02
BPF2-F03
BPF3-F04
VOL 9,10
0.1 R922
MD1 VSS-CPU X601
I2C-DAT
I2C-CLK
VOL 3,4
VOL 1,2
VOL 5,6
VOL 7,8
1M
(Page 53)
RESET
4MHz A GND
JOG A
VOL B
JOG B
KEY 2
KEY 4
KEY 1
KEY 0
KEY 5
KEY 3
C960
AVCC
AVSS
MD2
1 77 GC RESET
50V
VOL A
C903 JR916 LED+9V
0.1 0
C916 0.1 BPM LOW
R1351 1k REMOTE CONTROL LED GND

RECEIVER
(E15,SP,MY) DISPLAY
R901 R900
10k 10k IC902
R1352 4.7k RPM7240-H4 KEY-P POWER KEY
R903 100
R904 100
R911 0 R919 10k LED-S STBY LED
R913 0
R917 10k
C921
0.001
NO909 C920
7P R916 R915 R918
47
1k 100 1k
+VH 9V 10V
64
65
66
67
68
69
70
71
72
73
74
75
C905 R902 R944

51
52
53
54
55
56
57
58
59
60
61
76
79
77
80
0.1 10k 47
+VL 9V
LED GND (E15,SP,MY)

D904
RR263M-400FTR
TAPE A LED 44 FB901 0
64
R905 15k
R906 15k
R907 15k
R908 15k
R909 15k
R910 15k
KEY0
C923 C910
0.01 0.01 R959
DGND C918 FB901 C973
470 R912 R914 C919 D927
470 1000
(Page 69) KEY5 69
10k 10k
4V (AUS)
0.01
6.3V
RR263M-400FTR
R956 R957 R958

CN913 1.5k 1k 680
57
65
15P
VOL B 79
R993 R983 R984 R985 R986 R987 R988 R989 R990
S900 S903 470 Q904 470 680 1k 1.5k 1.5k 2.2k 3.3k 470
VOL A 80 S901 S902
2SB1132-T100-QR
ILLUMINATION SLEEP
GC DGND B+ SWITCH
R997
470 Q906
VH +9V S921 S922 S923 S924 S925 S926 S927 S928
R994 JR921 2SB1132-T100-QR
SET SELECT
VL +9V 1k 0 B+ SWITCH
LED GND CLOCK TIMER

TUNER/BAND - + TUNER MEMORY FM MODE TUNING MODE DISPLAY
NO917
VOL 11 LED R998 ENTER 9P
TUNING
1k
m
VOL 9, 10 LED 56 58 TAPE B LED
www
VOL 7,8 LED 55 KEY TC-B
R899 R898 R897
59
470 470 470

VOL 5, 6 LED 54 Q905 47 GAME,REC LED
(Page 67) DTC114EKA-T146
VOL 3,4 LED 53 D906 46 CD LED
LED POWER
Q903 SEL5423E
VOL 1, 2 LED 52 SELECT SWITCH Q908 68 KEY 4
DTC114EKA-T146 TUNER/BAND
DTC114EKA-T146
KEY2 66 LED POWER D GND
LED DRIVE
. .
KEY3 67 SELECT SWITCH VH +9V
KEY TC-B VL +9V (Page 71)

LED GND
HCD-ZX10D
65 65
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
VOL BOARD
2 3 4 5 6
8 9 2 4 9 8 2 9 9 7 8
R968
A S918
S913
ROCK
S904
D912 SALSA R963
DVD TOP R970 R967
MENU VOLUME
D913 LEVEL 6
JW909
S914 VOLUME S905 S909
JAZZ LEVEL 7 REGGAE SOUND
FIELD
R975 R971 R966
R974 D911
R1313
JR911
R1316
R1317
D914 VOLUME R962
R1320
S915 VOLUME LEVEL 5 S906
S919 LEVEL 8
R1324
JR912
POP
R1323
DANCE D910
JW923
JW924
DVD VOLUME S910
B R972 R965
TEL
TEL
MENU R1301 LEVEL 4 P FILE
R1308 Q915 Q913 Q912 Q911
S916 R961
R976 S907 S911
MOVIE D915 R1315
E
JW928
E E E E SAMBA X-GROOVE
VOLUME R1322 Q914 R960
13942296513
13942296513
R973
JW940
JW922
S920 LEVEL 9 R1329 JR910 R964
R1310 D909 JW829
AMP
MENU JW929 R1309 VOLUME
S908 S912
LEVEL 3
JW927
S975 R1306 TANGO EFFECT
R969 S917 ROTARY EPT927 ON/OFF
JW921
R1331
15 GAME JR913 ENCODER
R1330
R1327
VOLUME
C
JW908
3 1 C971
D916
VOLUME C968 C967
AA LEVEL 10
QQ
QQ
PANEL BOARD NO924 JR909 D908
QQ
JW912
TEL
VOLUME
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
CN913 CN928 R1303
(Page 64) LEVEL 2
2 R1302
C969
376315150 892498299
376315150 892498299
1 R1300
R1337
R1336
R1335
JW913
1
JW926
JW925
JW914
D917 D907
VOLUME VOLUME
LEVEL 11 LEVEL 1
D 11
1-861-394- (13)
(CHASSIS) S904 – 920, 929

CURSOR BOARD POWER SW BOARD
• Semiconductor
4 6
Location
R979
E R980
S970
Ref. No. Location
ENTER D907 D-6
R978
R981
R982
R1338 D908 C-6
D920 D909 C-6
R1339
3 1 (STANDBY) D910 B-6

D911 B-6
R1340
D912 A-5
Q900 D913 B-4
2 1
E S929 D914 B-4
11 D915 C-4
NO929 1
1-863-006- (14) D916 C-4
D917 D-4
R1342 R1341 D920 E-3
www m
F Q900 F-3
Q911 B-6
4 1 Q912 B-5
11
NO912 Q913 B-5
. .
1-861-396- (13)
Q914 B-5
Q915 B-5
PANEL BOARD
X NO910
(Page 64)
HCD-ZX10D
66 66
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-39. SCHEMATIC DIAGRAM – PANEL SECTION (3/5) –
8 9 2 4 9 8 2 9 9
R969
S904 S913 470
R968
SALSA ROCK
470
C968
S975 0.1
ROTARY ENCODER C967
S905 R967 S914 R970
VOLUME 0.1
680 680
REGGAE JAZZ
R971
S906 R966 S915 1k
1k D908 D910 D912 D914 D916
POP DANCE
SELS5823C SELS5823C SELS5823C SELS5823C SELS5823C
-TP15 -TP15 -TP15 -TP15 -TP15
VOLUME VOLUME VOLUME VOLUME VOLUME R972
S907 R965 LEVEL 2 LEVEL 4 LEVEL 6 LEVEL 8 LEVEL 10 S916 1.5k
1.5k
SAMBA MOVIE
TEL
TEL
S917 R973
S908 R964 1.5k
TANGO GAME
1.5k JR909 JR910 JR911 JR912 JR913
0 0 0 0 0
EPT927
C971
S918 R974 0.1
SOUND DVD TOP 2.2k
S909 R963
13942296513
13942296513
FIELD MENU
2.2k D907 D909 D911 D913 D915 D917 C969
SELS5823C SELS5823C SELS5823C SELS5823C SELS5823C SELS5823C 0.1 (CHASSIS)
-TP15 -TP15 -TP15 -TP15 -TP15 -TP15 S919 R975
DVD 3.3k
VOLUME VOLUME VOLUME VOLUME VOLUME VOLUME
MENU
S910 R962 LEVEL 1 LEVEL 3 LEVEL 5 LEVEL 7 LEVEL 9 LEVEL 11
P FILE 3.3k
R976
R1300
R1302
R1303
R1306
R1309
R1310
R1313
R1316
R1317
R1320
R1323
R1324
R1327
R1330
R1331
R1335
R1336
R1337
S920 4.7k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
1k
AMP
S911 R961 NO924
MENU
4.7k 15P
X-GROOVE
VOL B
VOL A
S912 R960 GC DGND
6.8k
EFECT
VH +9V
ON/OFF Q911 Q912 Q913 Q914 Q915
DTC114EKA-T146 DTC114EKA-T146 DTC114EKA-T146 DTC114EKA-T146 DTC114EKA-T146 VL +9V
QQ
QQ
LED DRIVE LED DRIVE LED DRIVE LED DRIVE LED DRIVE
LED GND
TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
VOL 11 LED
R1301 R1308 R1315 R1322 R1329
100 100 100 100 100
VOL 9, 10 LED
376315150 892498299
376315150 892498299
VOL 7,8 LED
VOL 5, 6 LED
CN928 VOL 3,4 LED
(Page 65)
2P
DGND VOL 1, 2 LED
CURSOR KEY KEY2
KEY3
KEY TC-B
NO912
R978 R979 R980 R981 R982 4P
10k 15k 22k 33k 68k
EVER 4V
D GND
S970 D920
SEL5223S
ENTER LED STBY
(STNDBY)
KEY POWER
(Page 65)
NO929 R1338 R1339 R1340 R1341 R1342
2P 1k 1k 1k 100 470
CURSOR KEY
DGND
S929
Q900
DTC114EKA-T146
LED DRIVE
HCD-ZX10D
67 67
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
1 2 3 4 5 6 8 9 2 4 9 8 2 9 9
7 8 9
TC-A BOARD
A E R842
Q907
R835
R836
R833
D919 JR903 D918 D918, S935
D916, S936
CD-L BOARD
CN915
S936
TEL
TEL
B NO900
JW920
S935
3 1 JW911
R846
Z JW910 R845
13942296513
13942296513
PANEL
R834 BOARD
NO909 R843
S938 (Page 64) R844
REPEAT R896 S933 S934
DIRECTION
S939
R866 R840 R837
PLAY
1 MODE
C 2 S937 S931 – 939,

S956, 958 – 967
DOLBY PL
CN911
S932 S931
QQ
QQ
TEL QQ
CN914
1 3 9 4 2 2 9 6 5 1 3
11 11 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
1-861-393- (13) 1-861-395- (13)
PANEL BOARD
Y CN908
(Page 64)
JOG BOARD
D
S957
ROTARY ENCODER NO922
JOG E R871
Q916 7
S967 R883
R892 FLASH
MODE S961 S960 S959 S958 S956
R890 SPEAKERS
DISC 5 DISC 4 DISC 3 DISC 2 DISC 1
R888
D925 1
R887 R886 R885 R884 R882
D925, S966
JW1018
R889 R891
C964 3 X-ROUND R895
1 C965
E ON/OFF R893 11
JW1017
R894 S965
S962 S963 S964 FLASH 1-861-392- (13)
S966 OPEN/CLOSE EX-CHANGE DISC SKIP
HCD-ZX10D
68 68
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
8 9 2 4 9 8 2 9 9
CN915
7P
+VH 9V
+VL 9V
LED GND
TAPE A LED
KEY0
DGND
(Page 65) KEY5 D918 D919
SEL5423E SEL5423E
JR903
0
TEL
TEL
R842 R833 R835 R836
100 470 470 470
R846
13942296513
13942296513
1.5k
Q907
DTC114EKA-T146
LED DRIVE
R866 R896 R834 R837 R840 R843 R844 R845

33k 22k 15k 10k 6.8k 4.7k 3.3k 2.2k
NO900 CN914
CN911 3P 3P
QQ
QQ
KEY5
2P
S937 S938 S939 S931 S932 S933 S934 S935 S936
QQ
KEY5 KEY0
TEL DGND
1 3 9 4 2 2 9 6 5 1 3 DGND
3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
PLAY DIRECTION
DOLBY PL REPEAT
MODE
NO922
7P
KEY5
DGND
SPK MODE LED
JOG A
JOG B
S957
+VL 9V
ROTARY ENCODER
LED GND
JOG D925
C965 SEL5823A (Page 65)
0.01
X-ROUND
ON/OFF
R871 R883
100 470
R888 R890 R892
1k 1k 1k
C964
0.01
Q916
DTC114EKA
LED DRIVE
R895 R894 R893 R891 R889 R887 R886 R885 R884 R882
15k 10k 6.8k 4.7k 3.3k 2.2k 1.5k 1.5k 1k 680
www m
S964 S963 S962 S961 S960 S959 S958 S956
S967 S966 S965
MODE
.
SPEAKERS
x ia o y u 1 6 3
X-ROUND
ON/OFF
FLASH DISC SKIP EX-CHANGE
OPEN/CLOSE
DISC 5 DISC 4 DISC 3 DISC 2
.
DISC 1
c o
HCD-ZX10D
69 69
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
1 2 3 4 5
8 9 2 4 9 8 2 9 9
TC-B BOARD CD-R BOARD
A NO919 NO925
1 2 1 5
R859
R857
R860
JW935 R862
ALBUM
D923
JR908 S950
D924, S949 D923, S948 – + S951
D924
R870 R872
TEL
TEL
CN916
R869
R873
R874
S949 S948 R875
13942296513
13942296513
R868
B Q910
S952 R876
R877
S953
BB
JW936
E
JW934 PANEL
BOARD R881
NO917
S947 (Page 64) S954 S955
D926, S955
u D926
S945 JW937
R880 R878
QQ
QQ
R861
QQ
E R879
TEL 1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
JW938 Q917
S944 JW933
376315150 892498299
376315150 892498299
R864
C JW932 D922, S940

11
Q909 REC PAUSE/
R858 R850 D922
START 1-861-398- (13)
E
R848
JW931
S943
CD SYNC S940 FUNCTION SW BOARD
JR907
R851
JW930
R849
D921
R855
R847
R852
D S942
GAME
D921, S941
S941
GAME
MIXING CN905 • Semiconductor
Location
Ref. No. Location
D921 D-2
11 D922 C-2
(13) D923 B-2
1-861-390-
D924 B-1
D926 C-5
S930
S930, 940 – 945, FUNCTION Q909 C-1
S947 – 955 Q910 B-1
m
Q917 C-4
www
R832
E NO901
1 2
. .
11
1-861-389- (13)
HCD-ZX10D
70 70
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
8 9 2 4 9 8 2 9 9
CN916
9P
TAPE B LED
KEY TC-B
GAME, REC LED
CD LED
KEY 4
DGND
VH +9V
VL +9V
(Page 65)
LED GND
TEL
TEL
D922
D921 SEL5223S D923 D924
SEL5423E SEL5423E SEL5423E
REC PAUSE/
GAME
START
13942296513
13942296513
R847 R849 R851 JR907 R857 R859 R862 JR908
470 470 470 0 470 470 470 0
Q909 Q910
R850 DTC114EKA-T146 R860 DTC114EKA-T146
100 100
LED DRIVE LED DRIVE
CN905
5P
CD LED
QQ
QQ
DGND
TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
+VL 9V
R870
6.8k
LED GND
R848 R852 R855 R858 R861 R864
376315150 892498299
376315150 892498299
2.2k 1.5k 1.5k 1k 680 470
KEY4
R868 R869
15k 10k
NO919
2P
S940 S941 S942 S943 S944 S945 S947 S949 S948 KEY3
GND
REC PAUSE/ GAME GAME CD SYNC

START MIXING
NO925
5P
CD LED
DGND
+VL 9V S930
FUNCTION
LED GND D926 NO901
R832 2P
SEL5423E
22k
KEY4 KEY 3
R872 R873 R874 R875 R876 R877 GND

3.3k 4.7k 6.8k 10k 15k 22k
R878 R879 R880 R881
470 470 470 100
S950 S951 S952 S953 S954 S955
www - ALBUM
.
+
x ia o y u 1 6 3 Q917
DTC114EKA-T146
LED DRIVE
. c o m
HCD-ZX10D
71 71
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-44. PRINTED WIRING BOARDS – POWER SUPPLY SECTION – • See page 35 for Circuit Boards Location.
1 2 3 4 5 6 7 8 9
8 9 2 4 9 8 2 9 9
CN1112
A TRANS BOARD
FH1172 F1171 FH1171
6
JW1145
JW1144
FH1152 F1151 FH1151
U
JW1142
POWER
JW1143
BOARD
1 NO607
(Page 57)
FH1162 F1161 FH1161

B FH1142 F1141 FH1141
F1181
TEL
TEL
FH1182 FH1181
C
CN1113
JW1111
JW1183
13942296513
13942296513
JW1182
JW1187
JW1184
7
JW1186
JW1185
FH1192 F1191 FH1191
1
JW1189
JW1188
T1100 T
JW1121 POWER POWER
TRANSFORMER BOARD
NO603
1 (Page 57)
R1192
(E15, SP, MY)
D
JW1131
NOT REPLACEABLE:
JW1193
BUILT IN TRANSFORMER D1192
4
JW1192
JW1194
NO1111
QQ
QQ
E TEL 1 3 9 4 2 2 9 6 5 1 3 QQ 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
C1192
11
1-861-385- (14)
(CHASSIS) VOLTAGE SELECTOR BOARD (CHASSIS)

F
(E15, SP, MY)
EP1003 EP1004
S1000
NO1001 VOLTAGE SELECTOR
C1004
2 230 – 240V 220V 120V
1
JW1004
(AUS)
G SWITCHING
POWER
JW1005
JW1007
JW1009
1 2
(AC IN)
1
2
NO1003 CN1002
JW1006
JW1008
JW1010
H JR1002
D1000
RY1000
(E15, SP, MY)

Q1000 4 1
www m
C1002
I JW1001 E
R1001
R1000
L1001
3 1
CN1000 11
C1006
C1001 CN1004
. .
1-861-384- (14)
MAIN BOARD
J K NO401
(Page 51)
HCD-ZX10D
72 72
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
7-45. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION –
8 9 2 4 9 8 2 9 9
F1141
T8AL
250V
F1151
CN1112 T8AL
6P 250V NO1111
VH(AC) 4P (E15,SP,MY)
T1100
2P (AUS)
VH(AC) POWER TRANSFORMER (E15,SP,MY)
GND 8 5 JW1111 120

F1161
GND T8AL
250V
9 3 JW1121 220
VL(AC)
VL(AC) F1171 10 1 JW1131 230-240

T8AL
TEL
TEL
(Page 59) 250V 11 7 L
F1181
12
T4AL
250V
13
13942296513
13942296513
CN1113
7P
AC4
F1191
AC4 T4AL 14
250V
AC3 15
AC3 16
VP JW1192 D1192 10EDB40 17
VF 18
VF JW1193 19
(Page 58)
C1192
QQ
QQ
R1192 100
0.68
63V
∗ NOT REPLACEABLE:
TEL QQ
BUILT IN TRANSFORMER
1 3 9 4 2 2 9 6 5 1 3 3 7 6 3 1 5 1 5 0 8 9 2 4 9 8 2 9 9
376315150 892498299
376315150 892498299
(E15,SP,MY)
S1000
VOLTAGE SELECTOR
EP1003
120V
CN1004
4P (E15,SP,MY)
220V
2P (AUS)
(CHASSIS)
120 (E15,SP,MY)
230-240V
220
230-240
C1004
0.1
NO1003
L JW1004
2P
L
(AUS)
RY1000
CN1002
2P SWITCHING
POWER
R1000 D1000 (AC IN)
CN1000 4.7k 1SS355TE
Q1000
m
3P 2SC2412KT
www
STBY RLY -146-R
R1001 JR1002
100k POWER ON/OFF 0 NO1001
D-GND
2P
RELAY DRIVE
EVER+4V EVER+4V
D-GND
(Page 53)
. .
C1006
C1001 L1001 C1002
1000
0.1 18µH 0.1
6.3V The components identified by mark 0 or dotted
HCD-ZX10D
73 73
HCD-ZX10D
QQ 3 7 6 3 1 5 1 5 0
• Waveforms
– RF Board –
qa IC001 1 (DVDRFP)
– DMB07 Board –
1 IC509 el (FE)
(DVD play mode)
7 IC207 <zxx (VDAC_3)
(DVD play (color bar) mode)
– VIDEO Board –
wa IC1201 qh (CROUT)
8 9 2 4 9 8 2 9 9
– MAIN Board –
ea Q101 (Base) (REC mode)

– PANEL Board –
ra IC901 is (X-OUT)
4.3 Vp-p
1.5 Vp-p 3.2 Vp-p
Approx.
400 mVp-p 0.1 Vp-p 0.7 Vp-p
11.4 µs
H 250 ns
H
500 mV/DIV, 100 ns/DIV 100 mV/DIV, 5 ms/DIV 1 V/DIV, 20 ns/DIV 2 V/DIV, 20 µs/DIV 2 V/DIV, 5 µs/DIV 1 V/DIV, 100 ns/DIV
IC001 el (TE) IC509 ra (TE) IC207 <zxb (VDAC_2) IC1201 qk (CBOUT) Q101 (Collector) (REC mode)
qs 2 8 ws (DVD play (color bar) mode)
es
(DVD play mode) (DVD play (color bar) mode)
TEL
TEL
Approx. Approx. 2.2 Vp-p 1.5 Vp-p 15.4 Vp-p
100 mVp-p 0.2 Vp-p
H H 11.4 µs
13942296513
13942296513
100 mV/DIV, 5 ms/DIV 200 mV/DIV, 5 ms/DIV 1 V/DIV, 20 ns/DIV 2 V/DIV, 20 µs/DIV 5 V/DIV, 5 µs/DIV
IC001 r; (FE) IC509 t; (RFAC) IC207 <zx, (VDAC_1) IC1201 w; (CYOUT), wa (YOUT) IC401 qa (XC-OUT)
qd 3 9 wd (DVD play (color bar) mode)
ed
(DVD play mode) (DVD play (color bar) mode)
Approx. 2.2 Vp-p

1Vp-p 2.8 Vp-p
50 mVp-p 1.09 Vp-p
QQ
QQ
H 30.5 µs
TEL 1 3 9 4 2 2 9 6 5 1 3 QwfQ 3 7 6 3 1 5ef 1 5 0 8 9 2 4 9 8 2 9 9

200 mV/DIV, 5 ms/DIV 1 V/DIV, 100 ns/DIV 1 V/DIV, 10 ns/DIV 2 V/DIV, 20 µs/DIV 1 V/DIV, 10 µs/DIV
376315150 892498299
376315150 892498299
IC001 tj (RFAC) IC901 r; (XTAL) IC207 <zcz (VDAC_0) IC1201 wd (CVBSOUT) IC401 qd (X-OUT)
qf 4 q; (DVD play (color bar) mode) (DVD play (color bar) mode)
1.6 Vp-p
1.09 Vp-p 3.4 Vp-p 1.2 Vp-p 2.5 Vp-p
50 ns 62.5 ns
500 mV/DIV, 100 ns/DIV 1 V/DIV, 20 ns/DIV 1 V/DIV, 10 ns/DIV 2 V/DIV, 10 µs/DIV 1 V/DIV, 20 ns/DIV
IC906 8 (XTO) IC1201 wh (C OUT)

5 wg (DVD play (color bar) mode)
4 Vp-p 1.9 Vp-p
37 ns
1 V/DIV, 20 ns/DIV 2 V/DIV, 10 µs/DIV
IC207 <zz. (VDAC_4) IC1201 wj (S-DCOUT)

6 wh (DVD play (color bar) mode)
0.7 Vp-p
www m
0.4 Vp-p
H
1 V/DIV, 20 ns/DIV 500 mV/DIV, 10 µs/DIV
. .
HCD-ZX10D
74 74
HCD-ZX10D
QQ 376315150 892498299
• IC Block Diagrams
– RF Board –
IC001 SP3723CAF0PM
RFSIN
ATON
RFDC
ATOP
RFAC
MEV
VNA
VPA
BYP
FNN
FNP
DIN
AIN
DIP
AIP
RX
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
FAST ATTACK
INPUT
SEL ATT AGC
4 OUTPUT FULL WAVE AGC CHARGE HOLD
INHIBIT RECTIFER PUMP
PROGRAMMABLE FROM S-PORT
INPUT EQUALIZER
DVDRFP 1 MUX ATT AGC
BIAS FILTER
DVDRFN 2 DIFFERENTIATOR
2
2 INPUT
INPUT IMPEDANCE
IMPEDANCE SEL AGCO
SEL + CLAMP &
– ENVELOPE
48 SDEN
TEL
TEL
CONTROL SERIAL
BUFFER SIGNALS 47 SDATA
PORT
+ TO EACH REGISTER 46 SCLK
2 LEVEL
SIGDET – BLOCK 45 V33
DAC
13942296513
13942296513
V33 FOR
OUTPUT
3 BUFFER
COMPARATOR CE ATT LPF ATT 44 LCP
A2 3 POL SEL
CEPOL BUFFER 43 LCN
PHASE – – PI
DETECTOR
B2 4 FE
TE
GCA EQ + MNTR
CE 42 MNTR
+ CONTROL
C2 5 V25
V125
PHASE
V25/3
DETECTOR
D2 6
QQ
QQ
TOPHOLD –
QQ 376315150 892498299
3 3 OFFSET
TEL 13942296513
+ GCA 41 CE
FROM FROM VC CANSEL
TOPHOLD
S-PORT S-PORT 4
376315150 892498299
376315150 892498299
CP 7 FROM
S-PORT
CN 8
A+D –
D OFFSET
D 9 + + GCA
LPF GCA 40 FE
GCA CANSEL
+
C 4 5
C 10
GCA + FROM FROM
B + S-PORT S-PORT
B 11
B+C
A OFFSET TE
A 12 MUX
GCA GCA
LPF GCA
SUB GCA 39 TE
CANSEL RST
3 6 3
FROM CD/DVD CP/CN CEFDB FROM FROM
MUX
S-PORT LOW S-PORT S-PORT
IMPEDANCE
B+D +
CD D 13 OFFSET
+ GCA
LPF 38 PI
+ CANSEL
+
CD C 14 5
GCA SUM FROM FOR SERVO PH
W/LPF AMP S-PORT OUTPUT
CD B 15
+ HOLDEN 37 V25
+ V25/2
CD A 16 SEL 36 V125
A+C
3 BCA
TOP
CD/DVD FROM DET 35 TPH
HOLD COMPA-
S-PORT
RATOR
– –
GCA + FROM 2 +
GCA
SEL 34 DFT
GCA DAC
S-PORT
3 4
FROM FROM
33 LINK
S-PORT S-PORT
VCI FOR SERVO INPUT
HYSTERESISTER LINKEN
VC = VPB/2 & OFFSET
FROM S-PORT
INPUT GAIN
xiaoy u163. com

BOTTOM
www
APC SEL FROM S-PORT INPUT AGCO
DUAL APC ENVELOPE
DVD/CD MIRR 2 IMPEDANCE
COMPARATOR FROM S-PORT SINK CURRENT 2
2 FROM S-PORT PH
LD H/L PEAK/BOTTOM INPUT
INTERNAL
HOLD BUFFER
.
FROM S-PORT FDGHG MUX
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
CD F
CD E
VPB
VC
DVDLD
CDLD
DVDPD
CDPD
VNB
LDON
MIRR
MP
MB
MLPF
MIN
MEVO
75
HCD-ZX10D
QQ 376315150 892498299
– DMB07 Board –
IC231 – 233, 256, 258, 259
SN74LV573APWR
IC302 PCM1609KPTR
AGND1
AGND2
ZERO8
DATA4
ZERO7
VCC1
VCC2
MDO
MDI
MC
ML
NC
OE 1 20 VCC 32 31 30
36 35 34 33 29 28 27 26 25
C1
19 1Q FUNCTION
24 VCC3
1D 2 1D 23 AGND3
RST 37 CONTROL
INTERFACE 22 VCC4
C1 21 AGND4
18 2Q SYSTEM
2D 3 1D SCKI 38
CLOCK
SCKO 39
MANAGER
C1 DAC LPF 20 VOUT8
17 3Q
3D 4 1D 19 AGND6
BCK 40 DAC LPF
LRCK 41 18 VCC5
C1 17 AGND5
16 4Q DAC LPF
4D 5 1D TEST 42 4X/8X ENHANCED 16 VOUT7
OVER SAMPLING MULTI- DAC LPF
VDD 43 SERIAL DIGITAL LEVEL
C1 INPUT
TEL
TEL
FILTER DELTA-
15 5Q INTERFACE 15 VCOM
5D 6 1D WITH SIGMA
DGND 44
FUNCTION MOJULE
CONTROLLER DAC LPF
C1 DATA1 45
14 6Q DATA2 46 14 VOUT1
6D 7 1D DAC LPF
13942296513
13942296513
DATA3 47
13 VOUT2
C1 DAC LPF
13 7Q
7D 8 1D
ZEROA 48 ZERO DETECT DAC LPF
C1
12 8Q
8D 9 1D
1 2 3 4 5 6 7 8 9 10 11 12
11 LE
ZERO1/GPO1
ZERO2/GPO2
ZERO3/GPO3
ZERO4/GPO4
ZERO5/GPO5
ZERO6/GPO6
NC
NC
VOUT6
VOUT5
VOUT4
VOUT3
GND 10
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
IC352 PCM1800E/2K
SYSCLK
DGND
AGND
DOUT
LRCK
C NR
C NR
C PR
C PR
VDD
VCC
BCK
24 23 22 21 20 19 18 17 16 15 14 13
DIGITAL ∑
MODULATOR 1/64
SERIAL I/O
DECIMATION
INTERFACE
FILTER
&
&
MODE/FORMAT
LOW-CUT
CONTROL
DIGITAL ∑ FILTER
MODULATOR
SINGLE-END SINGLE-END CLOCK/

DEFERENTIAL REFERENCE DEFERENTIAL TIMING CONTROL RESET/
CONVERTER CONVERTER POWER CONTROL
1 2 3 4 5 6 7 8 9 10 11 12
LIN
V REF 1
REFCOM
V REF 2
RIN
RSTB
BYPASS
FMT0
FMT1
MODE0
MODE1
FSYNC

76
HCD-ZX10D
QQ 376315150 892498299
IC509 CXD3068Q
AVDD1
AVDD0
AVSS1
AVSS0
V16M
VPCO
ASYO
RFDC
RFAC
VCTL
ADIO
CLTV
IGEN
BIAS
ASYI
FILO
PCO
FILI
CE
TE
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
DVDD2 61 OSC
ASYE 62
MD2 63 DIGITAL ASYMMETRY
PLL CORRECTOR
DIGITAL
ANALOG SWITCH
DOUT 64
OPERATIONAL
AMPLIFIER &
OUT
CONVERTER
A/D
LRCK 65 40 SE
D/A DIGITAL EFM
PCMD 66 INTERFACE 39 TE
DEMODULATOR
BCK 67 38 VC
37 TES1
36 TEST1
TEL
TEL
32K ERROR
35 DVSS1
RAM CORRECTOR
FOCUS FOCUS 34 FRDR
SERVO PWM
DSP GENERATOR 33 FFDR
13942296513
13942296513
EMPH 68 TRACKING TRACKING 32 TRDR
XTSL 69 SERVO PWM
DSP GENERATOR 31 TFDR
DVSS2 70
CLOCK SLED SLED 30 SRDR
XTAI 71
GENERATOR SERVO PWM
XTAO 72 DSP GENERATOR 29 SFDR
SUBCODE
PROCESSOR 28 DVDD1
SOUT 73
SOCK 74 27 FSTO
XOLT 75 SERVO INTERFACE 26 SSTP
DIGITAL 25 MDP
SERVO
QQ
QQ
CLV 24 LOCK
AUTO PROCESSOR
QQ 376315150 892498299
23 PWMI
TEL 13942296513
SEQUENCER
SQSO 76
376315150 892498299
376315150 892498299
SQCK 77 MIRR, DFCT, 22 FOK
SCSY 78 CPU FOK 21 DFCT
SBSO 79 INTERFACE DETECTOR
EXCK 80
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
DVDD0
XRST
MUTE
DATA
XLAT
CLOK
SENS
SCLK
ATSK
WFCK
XUGF
XPCK
GFS
C2PO
SCOR
C4M
WDCK
DVSS0
COUT
MIRR
IC906 SM8707GV-G-E2
VDD1 1 16 NC
VSS1 2 15 SO2
MO1 3 14 FSEL
MO2 4 13 SO1
VDD2 5 REF. PHASE CHARGE 12 VDD3

LPF 0 VCO 0
DIV. 0 DETECTOR0 PUMP 0
VSS2 6 11 VSS3
CONTROL
LOOP LOGIC
DIV. 0 10 AO2
www xiaoy u163. com

XTI 7 9 AO1
X'TAL REF. PHASE CHARGE
LPF 1 VCO 1
OSC DIV. 1 DETECTOR1 PUMP 1
XTO 8
LOOP
.
DIV. 1
77
HCD-ZX10D
QQ 376315150 892498299
– MAIN Board –
IC514, 515 BA6956AN
TSD
IC516 PQ12RF21
OVERHEAT
CONTROL LOGIC PROTECTION
CIRCUIT
ASO
1 2 3 4 5 6 7 8 9 PROTECTION
VREF
OUT2
RNF
OUT1
VM
VCC
FIN
GND
RIN
CIRCUIT
REFERENCE
VOLTAGE OUTPUT
GENERATION ON/OFF
CIRCUIT
TEL
TEL
CONTROL
CIRCUIT
1 2 3 4
13942296513
13942296513
DC INPUT
DC OUTPUT
GND
CONTROL
ON/OFF
IC517 SI-8050JF
IC518 SI-8033JF
OVER
REGULATOR CURRENT
PROTECTOR
LATCH
RESET &
ON/OFF
QQ
QQ
SOFT OSC DRIVER
QQ 376315150 892498299
COMPARATOR
TEL 13942296513
START
+
OVER HEAT
– PROTECTOR
376315150 892498299
376315150 892498299
+
– VREF
ERROR AMP
1 2 3 4 5
VIN
SW OUT
GND
VOS
ON/OFF
– MIC Board – – PANEL Board –

IC851 M65850FP-E1 IC903 NJM2760V-TE2
LPF2OUT
OP2OUT
LPF2IN
CLOCK
OP2IN
VCC
REF
IN1 1 20 BPF2OUT
14 13 12 11 10 9 8 BAND-PASS 19 BPF1IN2
DET
FILTER 18 BPF1IN1
OSCILLATOR
D/A LPF2
IN2 2 DET 17 RECOUT
1/2 VCC
CLOCK DO1 BUF1OUT 3 16 BPF1OUT
MO
AUTO MAIN 20KBIT
RESET BPF2IN1 4 BAND-PASS
RESET CONTROL SRAM DET 15 BPF2OUT
MI BPF2IN2 5 FILTER
xiaoy u163. com

D1 DO0
www
BPF3IN1 6 BAND-PASS
A/D DET 14 BPF3OUT
BPF3IN2 7 FILTER
LPF1
BPF4IN1 8 BAND-PASS
DET 13 BPF4OUT
.
1 2 3 4 5 6 7 BPF4IN2 9 FILTER
LPF1IN
LPF1OUT
OP1OUT
OP1IN
CC1
CC2
GND
12 N.C.
GND 10 11 V+
78
HCD-ZX10D
QQ 376315150 892498299
• IC Pin Function Description
DMB07 BOARD IC207 ZIVA5X-C1F (DVD SYSTEM PROCESSOR)
Pin No.
1
Pin Name
VDDP
I/O
– Power supply terminal (+3.3V)
Description
2 HA1 O Address signal output to the program ROM and address latch
Two-way data bus (address signal multiplexed) with the program ROM and
3 to 11 HD15 to HD7 I/O
address latch
12 VDDP – Power supply terminal (+3.3V)
13 GNDP – Ground terminal
14 to 19 HD6 to HD1 I/O
address latch
TEL
TEL
22 HD0 I/O
address latch
13942296513
13942296513
23 HDTACK I Acknowledge signal input terminal for host data transfer Not used
24 HIRQ0 I Interrupt signal input terminal Not used
25 WEH.UDS O Write enable host upper data strobe signal output to the program ROM
26 WEL.LDS O Write enable host lower data strobe signal output terminal Not used
27 HREAD O Output enable signal output to the program ROM
28 GPIO0 I Check jig detection signal input terminal
29 GND – Ground terminal
30 VDD – Power supply terminal (+1.8V)
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
31 GND25 – Ground terminal
32 VDD25 – Power supply terminal (+3.3V)
376315150 892498299
376315150 892498299
33 to 42 MA9 to MA0 O Address signal output to the SD-RAM
45, 46 MA10,MA11 O Address signal output to the SD-RAM
47, 48 BA1, BA0 O Bank select signal output to the SD-RAM
49 MCS0 O Chip select signal output to the SD-RAM
50 MCS1 O Chip select signal output terminal Not used
51 MRAS O Row address strobe signal output to the SD-RAM
52 MCAS O Column address strobe signal output to the SD-RAM
53 MWE O Write enable signal output to the SD-RAM
56 MCLK O Master clock signal output to the SD-RAM
57 to 60 MD0 to MD3 I/O Two-way data bus with the SD-RAM
62 MDQM0 O Write mask signal output to the SD-RAM
www xiaoy u163. com

80
81 to 84
. VDD
MD16 to MD19
–
I/O
Power supply terminal (+1.8V)
Two-way data bus with the SD-RAM
79
HCD-ZX10D
QQ 376315150 892498299
Pin No.
86
87
Pin Name
MDQM2
VDD25
I/O
O
–
Description
Write mask signal output to the SD-RAM
105 VCLK O Not used
106 XCK_I/O_SEL O Not used
107 VS O Wide control signal output to the video amplifier
TEL
TEL
Interlace/progressive selection signal output terminal
108 I/P SW O
"L": interlace, "H": progressive
13942296513
13942296513
109 CDSEL O Digital out signal selection signal output terminal Not used
110 MREQ O Muting request signal output to the master controller
113 MDI O Serial data output to the D/A converter
114 MC O Serial data transfer clock signal output to the D/A converter
115 ML O Serial data latch pulse signal output to the D/A converter
116 HIRQ2 I Busy signal input from the EEPROM
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
117 VDAC_4B – Ground terminal
118 VDAC_VDD4 – Power supply terminal (+3.3V)
376315150 892498299
376315150 892498299
119 VDAC_4 O Component video signal output to the video amplifier
122 VDAC_3 O Component video signal output to the video amplifier
125 VDAC_2 O Y signal output to the video amplifier
128 VDAC_1 O Chroma signal output to the video amplifier
131 VDAC_0 O Video signal output to the video amplifier
132 VDAC_DVSS – Ground terminal
133 VDAC_DVDD – Power supply terminal (+3.3V)
134 VDAC_REFVDD – Power supply terminal (+3.3V)
135 VDAC_REF I Reference voltage input terminal
136 VDAC_REFVSS – Ground terminal
137 XVSS – Ground terminal
138 XOUT O Clock signal output terminal Not used
www xiaoy u163. com

139 XIN I System clock signal (27 MHz) input from the clock generator
140 XVDD – Power supply terminal (+3.3V)
141 AVSS2 – Ground terminal
142
143
AVDD2
AVDD1
. –
–
144 AVSS1 – Ground terminal
80
HCD-ZX10D
QQ 376315150 892498299
Pin No.
145
146
Pin Name
VDD
GND
I/O
–
–
Ground terminal
Description
147 XCK O Audio system clock output to the D/A converter and A/D converter
148 LRCK O L/R sampling clock signal (44.1 kHz) output to the D/A converter
149 BCK O Bit clock signal (2.8224 MHz) output to the D/A converter
150 DATA0 (DM) O Audio data (for down mix) output to the D/A converter
151 DATA1 (FLR) O Audio data (for front) output to the D/A converter
154 DATA2 (SLR) O Audio data (for surround (rear)) output to the D/A converter
155 DATA3 (CSW) O Audio data (for center and sub woofer) output to the D/A converter
156 IEC958 O S/PDIF signal output terminal Not used
TEL
TEL
157 DAI_DATA I Data input terminal Not used
158 DAI_BCK I Bit clock signal input terminal Not used
13942296513
13942296513
159 DAI_LRCK I L/R sampling clock signal input terminal Not used
Two-way I2C clock bus with the master controller, mechanism controller and
160 I2C_CL I/O
display controller
Two-way I2C data bus with the master controller, mechanism controller and
161 I2C_DA I/O
display controller
162 CS (ZIVA_E2P) O Chip select signal output to the EEPROM
163 RXD1 I Serial data input terminal for check jig
164 TXD1 O Serial data output terminal for check jig
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
WRITE_CTRL
165 O Write control signal output to the EEPROM
(ZIVA_E2P)
376315150 892498299
376315150 892498299
SDDATA7 to
168 to 171 I Stream data signal input from the DVD decoder
SDDATA4
SDDATA3 to
174 to 177 I Stream data signal input from the DVD decoder
SDDATA0
178 SDREQ O Serial data request signal output to the DVD decoder
Serial data enable signal input from the DVD decoder and L/R sampling clock
179 SDEN I
signal input from the A/D converter
181 VDDP – Power supply terminal
Stream data signal input from the DVD decoder and digital audio data input from
182 SDERROR I
the A/D converter
Serial data transfer clock signal input from the DVD decoder and bit clock signal
183 SDCLK I
input from the A/D converter
184 HIRQ1 I Interrupt request signal input from the mechanism controller
185 DRVCLK I Serial data transfer clock signal input from the mechanism controller
186 DRVTX I Serial data input from the EEPROM and mechanism controller
www xiaoy u163. com

187 DRVRX O Serial data output to the EEPROM and mechanism controller
188 DRVRDY I Ready signal input from the mechanism controller
189 VNW – Power supply terminal (+5V)
190
191
. ALE
RST_SPC
O
O
Latch enable signal output to the address latch
Reset signal output to the mechanism controller "L": reset
192 INT/EXT O Internal/external selection signal output terminal
81
HCD-ZX10D
QQ 376315150 892498299
Pin No.
193, 194
195
Pin Name
HCS2, HCS1
HCS0
I/O
O
O
Chip select signal output terminal
Description
Not used
Chip select signal output to the program ROM
197 TRST I Reset signal input terminal (for JTAG)
198 TDO O Data output terminal (for JTAG)
199 TDI I Data input terminal (for JTAG) Not used
200 TMS I Mode selection signal input terminal (for JTAG)
201 TCK I Clock signal input terminal (for JTAG)
202 RESET I System reset signal input from the master controller "L": reset
203 BUS CLK O Not used
TEL
TEL
206 HA3 O Address signal output to the program ROM
207 HA2 O Address signal output to the program ROM and address latch
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

82
HCD-ZX10D
QQ 376315150 892498299
DMB07 BOARD IC701 TMC57929PGF-RDP (DVD DECODER)
Pin No.
1, 2
Pin Name
D5, D6
I/O
I/O
Description
Two-way data bus with the mechanism controller
3 VSS – Ground terminal
4 D7 I/O Two-way data bus with the mechanism controller
5 A0 I Address signal input from the mechanism controller
7 A1 I Address signal input from the mechanism controller
8 VDD5V – Power supply terminal (+5V)
9 to 14 A2 to A7 I Address signal input from the mechanism controller
16 XWAIT O Wait signal output terminal Not used
17 XRD I Read strobe signal input from the mechanism controller
TEL
TEL
18 XWR I Write strobe signal input from the mechanism controller
19 XCS I Chip select signal input from the mechanism controller
13942296513
13942296513
20, 21 XINT0, XINT1 O Interrupt signal output to the mechanism controller
23 XHRS I Not used
24 HDB7 O Stream data signal output to the DVD system processor
QQ
QQ
28 VDDS – Power supply terminal (+5V)
TEL 13942296513 QQ 376315150 892498299

29 HDB9 O Not used
376315150 892498299
376315150 892498299
31 HDBA O Not used
34 HDBB O Not used
37 HDBC O Not used
40 HDBD O Not used
43 HDBE O Not used
45 HDBF O Not used
46 HDRQ O Serial data effect flag signal output to the DVD system processor
48 XHWR O Serial data transfer clock signal output to the DVD system processor
49 XHRD O Header flag signal output terminal Not used
www xiaoy u163. com

51 REDY O Not used
53 XHAC I Serial data request signal input from the DVD system processor
54
55
. HINT
XS16
O
O
Not used
Not used
56 HA1 I Not used
83
HCD-ZX10D
QQ 376315150 892498299
Pin No.
57
58
Pin Name
XPDI
VDDS
I/O
I/O
–
Not used
Power supply terminal (+5V)
Description
59, 60 HA0, HA2 I Not used

62, 63 HCS0, HCS1 I Not used
65 DASP I/O Not used
66 to 69 MDB0 to MDB3 I/O Two-way data bus with the D-RAM
71 MDB4 I/O Two-way data bus with the D-RAM
73 to 75 MDB5 to MDB7 I/O Two-way data bus with the D-RAM
TEL
TEL
76 XMWR O Write enable signal output to the D-RAM
13942296513
13942296513
78 XRAS O Row address strobe signal output to the D-RAM
79, 80 MA0, MA1 O Address signal output to the D-RAM
82 to 87 MA2 to MA7 O Address signal output to the D-RAM
89 MA8 O Address signal output to the D-RAM
91 MA9 O Address signal output to the D-RAM
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
92 MNT1 O EEPROM ready signal output to the mechanism controller
93 MNT2 O Not used
376315150 892498299
376315150 892498299
94 XOE O Output enable signal output to the D-RAM
95 XCAS O Column address strobe signal output to the D-RAM
96, 97 MDB8, MDB9 I/O Two-way data bus with the D-RAM
99 MDBA I/O Two-way data bus with the D-RAM
101, 102 MDBB, MDBC I/O Two-way data bus with the D-RAM
104 to 106 MDBD to MDBF I/O Two-way data bus with the D-RAM
107 GFS O Guard frame sync signal output to the mechanism controller
109 APE0 O Absolute phase error signal output terminal
111 DASYO O RF binary signal output terminal
112 GNDA5 – Ground terminal
113, 114 ASF1, AFS2 – Filter connected terminal for selection the constant asymmetry compensation
115 DASYI I Analog signal input after integrated from the RF binary signal
116 RFDCC I Input terminal for adjusting DC cut high-pass filter for RF signal Not used
117 RFIN I RF signal input from the CD/DVD RF amplifier
118, 119 VCCA5, VCCA4 – Power supply terminal (+3.3V)
www xiaoy u163. com

120 VCOR1 – VCO oscillating range setting resistor connected terminal
121 VCOIN I VCO input terminal
122, 123 GNDA4, GNDA3 – Ground terminal
124
125
LPF5
VC1
. O
I
Signal output from the operation amplifier from PLL loop filter
Middle point voltage (+1.65V) input terminal
126, 127 LPF2, LPF1 I Inverted signal input to the operation amplifier from PLL loop filter
84
HCD-ZX10D
QQ 376315150 892498299
Pin No.
128, 129
130
Pin Name
VCCA3, VCCA2
PDO
I/O
–
O
Description
Signal output from the charge pump for phase comparator

131 PDHVCC I Middle point voltage input terminal for RF PLL
132 FDO O Signal output from the charge pump for frequency comparator
133, 134 GNDA2, GNDA1 – Ground terminal
135 SPO O Spindle motor control signal output terminal
136 VC2 I Middle point voltage (+1.65V) input terminal
137 MDIN2 I Spindle motor servo drive signal input terminal
138 MDIN1 I MDP input terminal
139 VCCA1 – Power supply terminal (+3.3V)
140 CLVS O Control signal output for selection the spindle control filter constant at CLVS
TEL
TEL
142 MDSOUT O Frequency error output terminal of internal CLV circuit
13942296513
13942296513
144 MDPOUT O Phase error output of internal CLV circuit
145 DFCT I Defect signal input from the DSP
146 GSCOR I Guard subcode sync (S0+S1) detection signal input from the DSP
147 EXCK O Subcode serial data reading clock signal output to the DSP
148 SBIN I Subcode serial data input from the DSP
150 SCOR I Subcode sync (S0+S1) detection signal input from the DSP
151 WFCK I Write frame clock signal input from the DSP
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
153 XRCI I RAM overflow signal input terminal Not used
376315150 892498299
376315150 892498299
155 C2PO I C2 pointer signal input from the DSP
157 DBCK O Bit clock signal output terminal Not used
158 BCLK I Bit clock signal input from the DSP
159 DDAT O PCM data output terminal Not used
160 MDAT I Serial data input from the DSP
162 DLRC O L/R sampling clock signal output terminal Not used
163 LRCK I L/R sampling clock signal input from the DSP
164 XRST I Reset signal input from the mechanism controller "L": reset
165 IFS0 I Interface selection signal input terminal Fixed at "L" in this set
166 IFS1 I Interface selection signal input terminal Fixed at "H" in this set
167 XTAL I System clock (33.8688 MHz) input terminal
169 XTL2 O System clock (33.8688 MHz) output terminal
170 XTL1 I System clock (33.8688 MHz) input from the clock generator
172 to 176 D0 to D4 I/O Two-way data bus with the mechanism controller

85
HCD-ZX10D
QQ 376315150 892498299
DMB07 BOARD IC901 CXP973064-245R (MECHANISM CONTROLLER)
Pin No.
1
Pin Name
NO_USE
I/O
O Not used
Description
2 SDEN O Serial data enable signal output to the CD/DVD RF amplifier

DOCTRL/ Digital out on/off control signal output to the DSP
3 O
ISBTEST "L": digital out off, "H": digital out on
4 XRST_2753 O Reset signal output terminal Not used
5 SDA_EEP I/O Data bus with the EEPROM
6 MNT1 I EEPROM ready signal input from the DVD decoder
7 FCS_JMP_1 O Focus jump 1 signal output to the motor/coil driver
8 FCS_JMP_2 O Focus jump 2 signal output to the motor/coil driver
9 SENS_CD I Internal status (SENSE) signal input from the DSP
System clock frequency selection signal output to the DSP
TEL
TEL
10 CDSP2 O
"L": 16.9344 MHz, "H": 33.8688MHz
11 CDSP4 O Not used
13942296513
13942296513
12 XCS_DVD O Chip select signal output to the DVD decoder
14 to 21 D0 to D7 I/O Two-way data bus with the DVD decoder
INIT0_DVD,
22, 23 I Interrupt signal input from the DVD decoder
INIT1_DVD
24 MSCK_SAMBA O Serial data transfer clock signal output terminal Not used
25 XRST_1882 O Reset signal output to the DVD decoder "L": reset
QQ
QQ
26 SCOR I Subcode sync (S0+S1) detection signal input from the DSP
TEL 13942296513 QQ 376315150 892498299

27 LAT_CD O Serial data latch pulse signal output to the DSP
28 LDON O Laser diode on/off control signal output to the CD/DVD RF amplifier
376315150 892498299
376315150 892498299
29 MIRR I Mirror signal input from the CD/DVD RF amplifier and DSP
30 COUT_CD I Numbers of track counted signal input from the DSP
Detection signal input from limit in switch
31 INLIM I
The optical pick-up is inner position when "H"
32 CS_ZIVA O Chip select signal output terminal
33 SI_ZIVA I Serial data input from the DVD system processor
34 SO_ZIVA O Serial data output to the DVD system processor
35 SCK_ZIVA O Serial data transfer clock signal output to the EEPROM and DVD system
36 DRVIRQ O Interrupt request signal output to the DVD system processor
37 DRVRDY O Ready signal output to the DVD system processor
38 RST I Reset signal input from the DVD system processor "L": reset
40 XTAL I System clock input terminal (20 MHz)
41 EXTAL O System clock output terminal (20 MHz)
43, 44 SLED_A, SLED_B O Sled motor drive signal output terminal
45 SCK_DSD O Output terminal for offset adjustment of APE0 (<z/. pin of DVD decoder)
46 SDOUT_DSD O Serial data output terminal Not used
47 SDIN_DSD I Serial data input terminal Not used
48 READY_DSD I Ready signal input terminal Not used
www xiaoy u163. com

49 DATA_CD O Serial data output to the DSP
50 CLOK_CD O Serial data transfer clock signal output to the DSP
51 XMSLAT O Serial data latch pulse signal output terminal Not used
52
53
SQSO
MUTE_DSD
. O
I Subcode Q data input from the DSP
Soft muting on/off control signal output terminal Not used
86
HCD-ZX10D
QQ 376315150 892498299
Pin No.
54
55
Pin Name
SQCK
VSS
I/O
O
–
Description
Subcode Q data reading clock signal output to the DSP
Ground terminal
CONTROL_2,
56, 57 I Not used
CONTROL_1
58 GFS_DVD I Guard frame sync signal input from the DVD decoder
59 MUTE_CD O Muting on/off control signal output to the DSP
60 MUTE_2D O Muting on/off control signal output to the motor/coil driver
61 SLED I Sled servo drive PWM signal input from the DSP
62 FG I Spindle motor control signal input from the motor/coil driver
63 SP_ON O Muting on/off control signal output to the motor/coil driver
64 JIT I Jitter signal input terminal
65 TE I Tracking error signal input from the CD/DVD RF amplifier
TEL
TEL
66 PI I Pull in signal input from the CD/DVD RF amplifier
67 FE I Focus error signal input from the CD/DVD RF amplifier
13942296513
13942296513
68 AVSS – Ground terminal
69 AVREF I Reference voltage (+3.3V) input terminal
70 AVDD – Power supply terminal (+3.3V)
71 GFS_CD I Guard frame sync signal input from the DSP
72 SCLK_CD O SENSE serial data reading clock signal output to the DSP
73 TSD-M O Thermal shut down signal output to the motor/coil driver
74 FOK_CD I Focus OK signal input from the DSP
75 LOCK_CD I GFS is sampled by 460 Hz "H" input when GFS is "H"
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
76 LDSEL O Laser diode selection signal output terminal
77 SACD/DVD O SACD/DVD selection signal output terminal Not used
376315150 892498299
376315150 892498299
Two-way I2C data bus with the DVD system processor, system controller and
78 I2C_SIO I/O
display controller
Two-way I2C clock bus with the DVD system processor, system controller and
79 I2C_SCL I/O
display controller
80 RXD I Serial data input from the RS-232C (for check)
81 TXD O Serial data output to the RS-232C (for check)
82 SDCLK_RF O Serial data transfer clock signal output to the CD/DVD RF amplifier
83 SDATA_RF I/O Two-way data bus with the CD/DVD RF amplifier
84 XWR O Write strobe signal output to the DVD decoder
85 XRD O Read strobe signal output to the DVD decoder
86 (PWE) – Not used
89 to 96 A0 to A7 O Address signal output to the DVD decoder
97 DSAVE O Power save control signal output to the motor/coil driver
98 XDRST O Reset signal output to the DSP "L": reset
99 WP_EEP O Write protect signal output to the EEPROM
100 SCL_EEP O Clock signal output to the EEPROM

87
HCD-ZX10D
QQ 376315150 892498299
MAIN BOARD IC401 M30620MCN-A42FPU0 (MASTER CONTROLLER)
Pin No.
1
Pin Name
MP3 ACK
I/O
O Not used
Description
2 MP3 O Not used

3 MP3 CS O Not used
4 SIRCS I Remote control signal input from the remote control receiver
5 MP3 DATA OUT O Not used
6 MP3 DATA IN O Not used
7 MP3 CLK O Not used
External data bus line byte selection signal input terminal
8 BYTE I
Fixed at "L" in this set
9 CNVSS – Ground terminal
10 XC-IN I Sub system clock input terminal (32.768 kHz)
TEL
TEL
11 XC-OUT O Sub system clock output terminal (32.768 kHz)
System reset signal input terminal "L": reset
13942296513
13942296513
12 RESET I For several hundreds msec. after the power supply rises, "L" is input, then it
change to "H"
13 X-OUT O Main system clock output terminal (16MHz)
15 X-IN I Main system clock input terminal (16MHz)
16 VCC – Power supply terminal (+3.3V)
17 NMI I Non-maskable interrupt input terminal Fixed at "H" in this set
QQ
QQ
18 MP3RST O Not used
TEL 13942296513 QQ 376315150 892498299

19 SCOR O Not used
20 AC-CUT I AC cut on/off detection signal input terminal "L": AC cut on
376315150 892498299
376315150 892498299
21 SENS O Not used
22 CD-CLK O Not used
23 XLAT O Not used
24 CD-DATA O Not used
25 XRST/SW RELAY O Not used
26 XTCN O Not used
27 FAN CTRL O Not used
28 STBY RELAY O Relay drive signal output for the main power "H": power on
Two-way I2C clock bus with the DVD system processor, mechanism controller
29 IIC-CLK I/O
and display controller
Two-way I2C data bus with the DVD system processor, mechanism controller
30 IIC-DATA I/O
and display controller
31 SW MUTE O Muting on/off control signal output for sub woofer out "H": muting on
32 REC MUTE O Recording muting on/off control signal output terminal "H": muting on
Under voltage detection signal input terminal
33 AC CUT MAIN I
(Iraninan, Singapore and Malaysia models only)
34 LINE MUTE O Line muting on/off control signal output for front amplifier circuit "H": muting on
35, 36 VMUTE2, VMUTE O Video muting on/off control signal output to the video amplifier "H": muting on
37 SYS RST O System reset signal output to the DVD system processor "L": reset
38 MREQ I Muting request signal input from the DVD system processor
www xiaoy u163. com

Automatic music sensor muting on/off control signal output terminal
39 AMS MUTE O
"H": muting on
CD-POWER/
40
41
DVD POWER
CD-A-MUTE
. O
O
Power on/off control signal output for the CD/DVD sections
CD/DVD analog muting on/off control signal output terminal

"H": power on
"H": muting on
42 TSENS I Disc table status detection signal input from the disc table sensor
88
HCD-ZX10D
QQ 376315150 892498299
Pin No.
43
44
Pin Name
DSENS
OC-SW1
I/O
I
I
Description
Disc in detection signal input from the disc in detect sensor
Disc tray open/close detection signal input terminal
45 CHK-SW I Disc chucking detection signal input terminal
46 OC-SW2 I Disc tray open/close detection signal input terminal
47 TBL-NEG O Table motor drive signal output terminal (counterclockwise direction)
48 TBL-POS O Table motor drive signal output terminal (clockwise direction)
49 LOD-NEG O Loading motor drive signal output terminal (load-in direction)
50 LOD-POS O Loading motor drive signal output terminal (load-out direction)
Deck-A playback detection signal input from the tape mechanism deck block
51 A-PLAY I
"L": playback
52 A-TRG O Deck-A side trigger plunger drive signal output terminal "H": plunger on
Deck-A cassette detection signal input from the tape mechanism deck block
TEL
TEL
53 A-HALF I
"L": cassette in
54 CPM-CNT2 O Capstan/reel motor drive signal output terminal "L": FWD/stop, "H": REV
13942296513
13942296513
Recording-proof (forward direction) detection signal input from the tape mecha-
55 REC-A I
nism deck block "L": recording possible
Deck-B playback detection signal input from the tape mechanism deck block
56 B-PLAY I
"L": playback
57 B-TRG O Deck-B side trigger plunger drive signal output terminal "H": plunger on
Recording-proof (reverse direction) detection signal input from the tape mecha-
58 REC-B I
nism deck block "L": recording possible
Recording/playback selection signal output terminal
QQ
QQ
QQ 376315150 892498299
59 TC-RELAY O
TEL 13942296513
"L": recording, "H": playback
60 BIAS O Recording bias on/off control signal output terminal "H": bias on
376315150 892498299
376315150 892498299
Automatic music sensor detection signal input terminal
61 AMS-IN I
"L": music is present, "H": music is not present
62 VCC – Power supply terminal (+3.3V)
63 TC-MUTE O Playback muting on/off control signal output terminal "H": muting on
65 AUDIO1-DATA O Serial data output to the audio control
66 AUDIO1-CLK O Serial data transfer clock signal output to the audio control
67 AUDIO1-DATA O Serial data output to the electrical volume
68 AUDIO1-CLK O Serial data transfer clock signal output to the electrical volume
69 ANALOG-IN-MUTE O Analog in muting on/off control signal output terminal "H": muting on
70 VIDEO OUT O Video out selection signal output to the video switch "L": CD/DVD, "H": game
71 C-RELAY O Relay drive signal output for the center speaker protect "H": relay on
72 REAR RELAY O Relay drive signal output for the surround (rear) speaker protect "H": relay on
73 DISPLAY-KEY I DISPLAY key input terminal (A/D input)
74 POWER-KEY I POWER key input terminal (A/D input)
75 GC RESET O Reset signal output to the display controller "L": reset
76 STBY LED O LED drive signal output of the standby indicator "H": LED on
77 HP DET I Headphone detection signal input terminal "H": headphone in
78 FR RELAY O Relay drive signal output for the front speaker protect "H": relay on
79 HP MUTE O Headphone muting on/off control signal output terminal "H": muting on
www xiaoy u163. com

80 STK MUTE O System muting on/off control signal output terminal "L": muting on
81 PROTECT I Protect on/off signal input terminal "L": protect on
82 ST-CLK O PLL serial data transfer clock signal output to the tuner unit
83
84
. ST-DIN
ST-DOUT O
I PLL serial data input from the tuner unit
PLL serial data output to the tuner unit
89
HCD-ZX10D
QQ 376315150 892498299
Pin No.
85
86
Pin Name
ST-CE
TUNED
I/O
O
I
Description
PLL serial chip enable signal output to the tuner unit
Tuning detection signal input from the tuner unit "L": tuned
87 STEREO I FM stereo detection signal input from the tuner unit "L": stereo
88 ST-MUTE O Tuner muting on/off control signal output to the tuner unit "H": muting on
Deck-B tape reel rotating detection signal input from the tape mechanism deck
89 A-SHUT I
block
Deck-A tape reel rotating detection signal input from the tape mechanism deck
90 B-SHUT I
block
Deck-B cassette detection signal input from the tape mechanism deck block
91 B-HALF I
"L": cassette in
92 MODEL-IN I Model setting input terminal (A/D input)
93 DEST-IN I Destination setting input terminal (A/D input)
TEL
TEL
Over voltage detection signal input terminal
94 I-HOLD I
(Iraninan, Singapore and Malaysia models only)
13942296513
13942296513
95 MIC-DET I Microphone detection signal input terminal "H": microphone in
96 AVSS – Ground terminal (analog system)
97 BPM-DET-LO I Low BPM detection signal input from the band-pass filter
98 VREF I Reference voltage (+3.3V) input terminal (analog system)
99 AVCC – Power supply terminal (+3.3V) (analog system)
100 MP3 O Not used
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

90
HCD-ZX10D
QQ 376315150 892498299
PANEL BOARD IC901 MB90M407PF-G-142-BNDE1 (DISPLAY CONTROLLER)
Pin No.
1 to 4
Pin Name
G4 to G1
I/O
O
Description
Grid drive signal output to the fluorescent indicator tube
5 to 10 SEG-1 to SEG-6 O Segment drive signal output to the fluorescent indicator tube
11 VSS-IO – Ground terminal (for I/O port)
23 VDD-FIP – Power supply terminal (+3.3V) (for fluorescent indicator tube)
42 VSS-IO – Ground terminal
43 SEG-36 O Segment drive signal output to the fluorescent indicator tube
44 TAPE A LED O LED drive signal output of the tape playback (deck-A) indicator "H": LED on
45 SPK MODE LED O LED drive signal output of the X-ROUND ON/OFF indicator "H": LED on
46 CD LED O LED drive signal output of the CD playback/pause indicator "H": LED on
TEL
TEL
LED drive signal output of the GAME and REC PAUSE/START indicator
47 GAME, REC LED O
"H": LED on
13942296513
13942296513
48 VKK – Power supply terminal (–33V) (for fluorescent indicator tube)
49 MD0 I CPU operation mode setting signal input terminal
50 MD1 I Setting terminal for the CPU operation mode Fixed at "H" in this set
51 MD2 I CPU operation mode setting signal input terminal
52 VOL 1, 2 O LED drive signal output of the volume level 1 and 2 indicator "H": LED on
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

56 VOL9, 10 O LED drive signal output of the volume level 9 and 10 indicator "H": LED on
LED drive signal output of the volume level 11 and TUNER/BAND indicator
376315150 892498299
376315150 892498299
57 VOL 11, TUNER BAND O
"H": LED on
58 TAPE B LED O LED drive signal output of the tape playback (deck-B) indicator "H": LED on
59 LED SELECT O LED power selection signal output terminal "L": VH+9V, "H": VL+9V
Two-way I2C data bus with the DVD system processor, system controller and
60 I2C-DAT I/O
mechanism controller
Two-way I2C clock bus with the DVD system processor, system controller and
61 I2C-CLK I/O
mechanism controller
62 AVCC – Power supply terminal (+3.3V) (for A/D converter)
63 AVSS – Ground terminal (for A/D converter)
64 to 69 KEY 0 to KEY 5 I Front panel key input terminal (A/D input)
70 BPF1-F01 I Spectrum analyzer drive signal input from the band-pass filter (for 8 kHz)
71 BPF2-F02 I Spectrum analyzer drive signal input from the band-pass filter (for 1.2 kHz)
72 BPF3-F03 I Spectrum analyzer drive signal input from the band-pass filter (for 300 Hz)
73 BPF4-F04 I Spectrum analyzer drive signal input from the band-pass filter (for 80 Hz)
74 ALL BAND I Spectrum analyzer drive signal input from the band-pass filter
75 JOG A I Jog dial pulse input from the rotary encoder (JOG) (A phase input)
76 JOG B I Jog dial pulse input from the rotary encoder (JOG) (B phase input)
77 RESET I Reset signal input from the master controller "L": reset
78 SOFT TEST O Output terminal for the software test
79 VOL B I Jog dial pulse input from the rotary encoder (VOLUME) (B phase input)
www xiaoy u163. com

80 VOL A I Jog dial pulse input from the rotary encoder (VOLUME) (A phase input)
81 VSS-CPU – Ground terminal (for CPU)
82 XOUT O System clock output terminal (4 MHz)
83
84
. XIN
VCC-CPU –
I System clock input terminal (4 MHz)
Power supply terminal (+3.3V) (for CPU)
91
HCD-ZX10D
QQ 376315150 892498299
Pin No.
85
86 to 100
Pin Name
NO USE
G19 to G5
I/O
O
I Not used
Description
Grid drive signal output to the fluorescent indicator tube

TEL
TEL
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

92
HCD-ZX10D
SECTION 8
QQ 376315150 892498299
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they may • Items marked “*” are not stocked since they are The components identified by mark
have some difference from the original one. seldom required for routine service. Some delay 0 or dotted line with mark 0 are
• Color Indication of Appearance Parts should be anticipated when ordering these items. critical for safety.
Replace only with part number
Example: • Accessories are given in the last of the electrical specified.
KNOB, BALANCE (WHITE) . . . (RED) parts list.
• Abbreviation
AUS : Australian model
E15 : Iranian model
MY : Malaysia model
SP : Singapore model
8-1. CASE SECTION
4
#1
TEL
TEL
13942296513
13942296513
3
back panel section
#1
2
#1
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
not
not supplied supplied
2
376315150 892498299
376315150 892498299
not 7
supplied
5
not supplied
panel board
section 7
not supplied
#1
6
1 not supplied
www xiaoy u163. com

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 4-252-686-11 LOADING PANEL 5 1-769-992-11 WIRE (FLAT TYPE) (13 CORE)
2 3-363-099-32 SCREW (CASE 3 TP2) 6 1-796-487-51 DECK, MECHANICAL (CWM43RR35)
.
3 4-237-661-31 CASE 7 4-951-620-01 SCREW (2.6X8), +BVTP
4 4-252-685-01 COVER (TOP) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
93
HCD-ZX10D
QQ 376315150 892498299
8-2. PANEL BOARD SECTION
55
54
53
53
not supplied 56 53
53
not supplied
(POWER SW board) 53
not supplied
(TC-A board)
53 53
not supplied 57
TEL
TEL
not supplied
not supplied (FUNCTION SW
53
board)
13942296513
13942296513
53
58
53
53 59
not supplied
(CURSOR
QQ
QQ
board)
TEL 13942296513
52
QQ 53 37631553150 892498299 not supplied
376315150 892498299
376315150 892498299
#1
60
51 not supplied
not supplied
front panel section not supplied
51 4-252-682-01 KNOB (ENTER) 56 A-4753-357-A PANEL BOARD, COMPLETE (AUS)
52 4-252-684-01 KNOB (VOLUME) 57 1-773-163-11 WIRE (FLAT TYPE) (21 CORE)
www xiaoy u163. com

53 4-951-620-01 SCREW (2.6X8), +BVTP 58 A-4752-627-A VOL BOARD, COMPLETE
54 4-237-635-11 KNOB (MIC) 59 A-4751-063-A TC-B BOARD, COMPLETE
55 A-4752-629-A MIC BOARD, COMPLETE (E15, SP, MY) 60 A-4752-641-A GAME/HP BOARD, COMPLETE (E15, SP, MY)
.
55 A-4753-359-A MIC BOARD, COMPLETE (AUS) 60 A-4753-347-A GAME/HP BOARD, COMPLETE (AUS)
56 A-4752-625-A PANEL BOARD, COMPLETE (E15, SP, MY) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
94
HCD-ZX10D
QQ 376315150 892498299
108
not supplied
not supplied
(CD-L board)
108
108 112 108

not supplied
111
not supplied 115
108
TEL
TEL
112 108
not supplied
108
13942296513
13942296513
114
113
108
116
not supplied
not supplied
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
108
108
102
376315150 892498299
376315150 892498299
108
not supplied
(CD-R board)
107
103
108 108
101 105 107

104
not supplied
106
110
109
101 4-252-650-01 WINDOW (TC) 109 4-252-652-01 HOLDER (TC-R)
102 4-252-649-21 LID (TC) 110 X-4956-392-1 FRONT PANEL ASSY
103 4-252-677-01 SPRING (LID) 111 4-252-653-02 BUTTON (EJECT-A) (A Z)
www xiaoy u163. com

104 4-252-651-01 HOLDER (TC-L) 112 4-254-779-01 SPRING (EJECT)
105 4-252-678-01 SPRING (L) 113 4-252-654-02 BUTTON (EJECT-B) (Z B)
106 4-252-679-01 SPRING (R) 114 X-4956-237-1 BRACKET CD ASSY

107 4-224-104-11 DAMPER 115 4-252-683-01 KNOB (JOG)
108
.
4-951-620-01 SCREW (2.6X8), +BVTP 116 A-4752-631-A JOG BOARD, COMPLETE
95
HCD-ZX10D
QQ 376315150 892498299
8-4. BACK PANEL SECTION
heat sink section
202
#1
#1
#1
210 #1
#1
203
#1
#1
#1
TEL
TEL
201 #1
208 DVD 209 #1
not supplied
mechanism deck
#1
13942296513
13942296513
section-1
207
#1
211
not #1
supplied M501
206 not supplied

QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
204
#1 205
#1
#1
not supplied
201 A-1066-611-A VIDEO BOARD, COMPLETE 207 1-468-737-21 POWER, SWITCHING
202 1-693-603-31 TUNER (FM/AM) 208 3-077-331-01 +BV3 (3-CR)
203 1-769-939-11 WIRE (FLAT TYPE) (11 CORE) * 209 3-378-433-01 CUSHION, SARANET
www xiaoy u163. com

204 A-4752-616-A MAIN BOARD, COMPLETE (SP, MY) 210 1-861-384-11 VOLTAGE SELECTOR BOARD
204 A-4753-446-A MAIN BOARD, COMPLETE (AUS) 211 3-559-407-21 CUSHION, STOPPER
204 A-4753-470-A MAIN BOARD, COMPLETE (E15) M501 1-787-099-21 FAN, DC
.
205 4-965-822-01 FOOT #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
* 206 4-988-533-01 HOLDER, PWB
96
HCD-ZX10D
QQ 376315150 892498299
8-5. HEAT SINK SECTION
not supplied
not supplied
(SENSOR board)
#2 #1
#1
252 #1
not supplied
253
F1191
#1
F1151
T1100
TEL
TEL
F1161
#1
#1
F1181
13942296513
13942296513
F1171 255 not supplied
F1141
254 255
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
chassis section

252 1-861-385-11 TRANS BOARD 0 F1161 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)
253 A-4752-634-A SURROUND BOARD, COMPLETE (E15, SP, MY) 0 F1171 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)
253 A-4753-341-A SURROUND BOARD, COMPLETE (AUS) 0 F1181 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)
www xiaoy u163. com

254 A-4752-643-A POWER BOARD, COMPLETE (E15, SP, MY) 0 F1191 1-533-471-12 FUSE, GLASS TUBE (DIA. 5) (T4.0AL/250V)
254 A-4753-338-A POWER BOARD, COMPLETE (AUS) 0 T1100 1-443-270-11 POWER TRANSFORMER
255 3-905-609-41 SCREW (TRANSISTOR) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
.
0 F1141 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V) #2 7-685-881-09 SCREW +BVTT 4X8 (S)
0 F1151 1-576-655-12 FUSE, GLASS TUBE (DIA. 5) (T8.0AL/250V)
97
HCD-ZX10D
QQ 376315150 892498299
8-6. CHASSIS SECTION
#1
303
302
304
301
not supplied
not supplied
#1
not supplied
TEL
TEL
not supplied
not supplied
13942296513
13942296513
#1
305
not supplied
QQ
QQ
QQ 376315150 892498299
not supplied
TEL 13942296513
not supplied
not supplied
376315150 892498299
376315150 892498299
not supplied
not supplied
#1

xiaoy u163. com

www
301 1-500-497-11 FILTER, CLAMP (FERRITE CORE) 0 303 1-827-295-22 CORD, POWER (AUS)
* 302 3-703-244-00 BUSHING (2104), CORD (SP, MY, AUS) * 304 4-954-051-41 HOLDER, PC BOARD
302 3-703-571-11 BUSHING (S) (4516), CORD (E15) 305 A-1062-666-A DMB07 BOARD, COMPLETE
0 303
.
1-777-071-53 CORD, POWER (SP, MY) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
0 303 1-829-627-11 CORD, POWER (E15)
98
HCD-ZX10D
QQ 376315150 892498299
8-7. DVD MECHANISM DECK SECTION-1 (CDM79B-DVBU64)
408
#3 401
404
not
supplied
#4
403
402
not
TEL
TEL
supplied
not supplied
13942296513
13942296513
405 407
#3
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
#3
406
not supplied
#3
DVD mechanism deck section-2
xiaoy u163. com

www
401 3-074-717-21 TRAY 406 3-074-737-01 PLATE (GUIDE)
402 3-325-697-21 WASHER 407 1-823-921-11 FMS-18 (6 Pin)
403 3-074-725-01 BELT, TD 408 4-218-252-52 SCREW (+PTPWH M2.6), FLOATING
.
404 A-6060-640-A UNIT ASSY, TD #3 7-685-534-19 SCREW +BTP 2.6X8 TYPE2 N-S
405 A-6060-642-A SE-130 BOARD, COMPLETE #4 7-682-544-04 +B 3X3
99
HCD-ZX10D
QQ 376315150 892498299
8-8. DVD MECHANISM DECK SECTION-2 (CDM79B-DVBU64)
462 452
optical block section
461
460
459
457 458 #1
463
452
452
S002
TEL
TEL
464
M001 455
13942296513
13942296513
not supplied
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299
454 #5
453 not supplied

(MD-94 board)
451
452 #3
451 3-074-742-01 GEAR (SHAFT) 462 3-074-739-01 COLLAR (SWING)
452 4-218-252-52 SCREW (+PTPWH M2.6), FLOATING 463 3-074-736-01 GEAR (CHUCK)
453 3-074-745-01 BELT (LOADING) 464 A-4736-882-A CHUCK ASSY
454 3-074-744-01 GEAR (LOADING A) M001 X-3952-411-1 MOTOR ASSY, LOADING
455 4-951-619-01 CUSHION (A) S002 1-418-746-11 ENCODER, ROTARY
www xiaoy u163. com

(CHUCKING DETECT, TRAY OPEN/CLOSE DETECT)
457 3-074-735-01 GEAR (IDOLER)
458 3-074-738-01 GEAR (SWING) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
459 3-074-741-01 GEAR (LOADING B) #3 7-685-534-19 SCREW +BTP 2.6X8 TYPE2 N-S
.
460 3-016-533-01 WASHER (FR), STOPPER #5 7-621-259-25 SCREW +P 2.6X4
461 3-074-740-01 GEAR (LOADING C)
100
HCD-ZX10D
QQ 376315150 892498299
8-9. OPTICAL BLOCK SECTION
504
504 505
503
503
TEL
TEL
506
504
13942296513
13942296513
503
507
QQ
QQ
QQ 376315150 892498299
not supplied
TEL 13942296513
376315150 892498299
376315150 892498299
501 #6

www xiaoy u163. com

501 A-4728-690-A RF BOARD, COMPLETE 506 1-824-106-12 CABLE, FLEXIBLE FLAT (24 CORE)
503 3-053-847-31 INSULATOR 507 X-4955-252-3 HOLDER (BU) ASSY
.
504 4-981-923-01 SCREW (M), STEP #6 7-685-535-19 SCREW +BTP 2.6X10 TYPE2 N-S
0 505 A-1067-676-A OPTICAL TRAVERSE UNIT (DBU-3)
101
HCD-ZX10D
CD-L CD-R SECTION 9
QQ 376315150 892498299
ELECTRICAL PARTS LIST
CURSOR DMB07
The components identified by mark
NOTE: 0 or dotted line with mark 0 are
• Due to standardization, replacements in the parts • Items marked “*” are not stocked since they are critical for safety.
list may be different from the parts specified in seldom required for routine service. Some delay Replace only with part number
the diagrams or the components used on the set. should be anticipated when ordering these items. specified.
• -XX and -X mean standardized parts, so they may • SEMICONDUCTORS When indicating parts by reference
have some difference from the original one. In each case, u: µ, for example: number, please include the board.
• RESISTORS uA... : µA... uPA... : µPA... ,
All resistors are in ohms. uPB... : µPB... uPC... : µPC... , • Abbreviation
METAL: metal-film resistor uPD... : µPD... AUS : Australian model
METAL OXIDE: Metal Oxide-film resistor • CAPACITORS: E15 : Iranian model
F: nonflammable uF: µF MY : Malaysia model
• COILS SP : Singapore model
uH: µH
CD-L BOARD S955 1-771-410-21 SWITCH, TACTILE (u)
TEL
TEL
*********** ************************************************************
< CONNECTOR > CURSOR BOARD

**************
13942296513
13942296513
CN911 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P
< RESISTOR >
< RESISTOR >
R978 1-216-833-11 METAL CHIP 10K 5% 1/10W
R834 1-216-835-11 METAL CHIP 15K 5% 1/10W R979 1-216-835-11 METAL CHIP 15K 5% 1/10W
R982 1-216-843-11 METAL CHIP 68K 5% 1/10W
< SWITCH >
< SWITCH >
QQ
QQ
S937 1-771-410-21 SWITCH, TACTILE (DOLBY PLII)
QQ 376315150 892498299
S938 1-771-410-21 SWITCH, TACTILE (REPEAT) S970 1-771-879-11 SWITCH, TACTILE (ENTER)
S939
TEL 13942296513
1-771-410-21 SWITCH, TACTILE (PLAY MODE) ************************************************************
376315150 892498299
376315150 892498299
************************************************************
A-1062-666-A DMB07 BOARD, COMPLETE
CD-R BOARD ***********************
***********
< CAPACITOR >
< LED >
C101 1-126-246-11 ELECT CHIP 220uF 20% 4V
D926 8-719-058-03 LED SEL5423E-TP15 (u) C151 1-126-206-11 ELECT CHIP 100uF 20% 6.3V
C201 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
< TRANSISTOR > C202 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
Q917 8-729-027-43 TRANSISTOR DTC114EKA-T146
< RESISTOR > C205 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C213 1-126-209-11 ELECT CHIP 100uF 20% 4V
R872 1-216-827-11 METAL CHIP 3.3K 5% 1/10W C214 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
R874 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
R875 1-216-833-11 METAL CHIP 10K 5% 1/10W C216 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
R877 1-216-837-11 METAL CHIP 22K 5% 1/10W C226 1-107-820-11 CERAMIC CHIP 0.1uF 16V
R878 1-216-817-11 METAL CHIP 470 5% 1/10W C227 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
R879 1-216-817-11 METAL CHIP 470 5% 1/10W
< SWITCH > C232 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
xiaoy u163. com

S950 1-771-410-21 SWITCH, TACTILE (ALBUM –, M)
www
S951 1-771-410-21 SWITCH, TACTILE (ALBUM +, m) C234 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
S952 1-771-410-21 SWITCH, TACTILE (>) C235 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
S953 1-771-410-21 SWITCH, TACTILE (.) C236 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
S954 1-771-410-21 SWITCH, TACTILE (x) C237 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
. C238 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
102
HCD-ZX10D
QQ 376315150 892498299
DMB07
C239 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C322 1-107-820-11 CERAMIC CHIP 0.1uF 16V
C243 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C325 1-126-209-11 ELECT CHIP 100uF 20% 4V
C244 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C352 1-126-206-11 ELECT CHIP 100uF 20% 6.3V
C363 1-107-820-11 CERAMIC CHIP 0.1uF 16V
C253 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C367 1-164-935-11 CERAMIC CHIP 470PF 10% 50V
TEL
TEL
C368 1-164-935-11 CERAMIC CHIP 470PF 10% 50V
C255 1-117-370-11 CERAMIC CHIP 10uF 10V C393 1-164-947-11 CERAMIC CHIP 0.01uF 50V
13942296513
13942296513
C258 1-117-370-11 CERAMIC CHIP 10uF 10V C501 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C263 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C507 1-117-370-11 CERAMIC CHIP 10uF 10V
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
C268 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C512 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C513 1-117-370-11 CERAMIC CHIP 10uF 10V
C278 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C522 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C279 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C523 1-107-820-11 CERAMIC CHIP 0.1uF 16V
C281 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C526 1-126-395-11 ELECT CHIP 22uF 20% 16V
C291 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C532 1-117-370-11 CERAMIC CHIP 10uF 10V
www xiaoy u163. com

C545 1-117-370-11 CERAMIC CHIP 10uF 10V
.
C321 1-126-206-11 ELECT CHIP 100uF 20% 6.3V
103
HCD-ZX10D
QQ 376315150 892498299
DMB07
C552 1-216-295-00 SHORT CHIP 0 C765 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C556 1-117-370-11 CERAMIC CHIP 10uF 10V C766 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C558 1-126-209-11 ELECT CHIP 100uF 20% 4V C767 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
TEL
TEL
13942296513
13942296513
C592 1-124-779-00 ELECT CHIP 10uF 20% 16V C781 1-126-246-11 ELECT CHIP 220uF 20% 4V
C701 1-126-209-11 ELECT CHIP 100uF 20% 4V C782 1-164-938-11 CERAMIC CHIP 0.0015uF 10% 50V
C702 1-117-370-11 CERAMIC CHIP 10uF 10V C901 1-126-209-11 ELECT CHIP 100uF 20% 4V
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
C716 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V C914 1-164-849-11 CERAMIC CHIP 9PF 0.5PF 50V
C718 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C915 1-164-847-11 CERAMIC CHIP 7PF 0.5PF 50V
C721 1-107-820-11 CERAMIC CHIP 0.1uF 16V C918 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C727 1-117-370-11 CERAMIC CHIP 10uF 10V C1302 1-107-820-11 CERAMIC CHIP 0.1uF 16V
C729 1-117-370-11 CERAMIC CHIP 10uF 10V < CONNECTOR >
CN101 1-784-366-21 CONNECTOR, FFC/FPC 7P
C733 1-117-370-11 CERAMIC CHIP 10uF 10V CN102 1-815-954-21 PIN, CONNECTOR (PC BOARD) 13P
C734 1-117-370-11 CERAMIC CHIP 10uF 10V CN105 1-784-376-11 CONNECTOR, FFC/FPC 17P
C740 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V CN107 1-778-692-11 CONNECTOR, FFC/FPC 21P
C741 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V CN501 1-778-957-11 CONNECTOR, FFC/FPC 29P
CN901 1-764-177-11 PIN, CONNECTOR (SMD) (1.5mm) 7P
C744 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V < DIODE >
www xiaoy u163. com

C752 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V D202 8-719-988-61 DIODE 1SS355TE-17
D393 8-719-988-61 DIODE 1SS355TE-17
.
104
HCD-ZX10D
QQ 376315150 892498299
DMB07
D901 8-719-988-61 DIODE 1SS355TE-17 < SHORT >
D1303 8-719-988-61 DIODE 1SS355TE-17
D1304 8-719-988-61 DIODE 1SS355TE-17 JW392 1-216-864-11 SHORT CHIP 0
JW801 1-218-990-11 SHORT CHIP 0
< FERRITE BEAD > JW802 1-218-990-11 SHORT CHIP 0
JW803 1-218-990-11 SHORT CHIP 0
FB105 1-469-324-21 FERRITE, EMI (SMD) (2012) JW804 1-218-990-11 SHORT CHIP 0
FB902 1-500-284-21 INDUCTOR, FERRITE BEAD
FB903 1-500-284-21 INDUCTOR, FERRITE BEAD JW805 1-218-990-11 SHORT CHIP 0
JW806 1-218-990-11 SHORT CHIP 0
< FILTER >
< SHORT/COIL >
FL101 1-234-177-21 FILTER, CHIP EMI
FL203 1-234-177-21 FILTER, CHIP EMI L103 1-216-295-00 SHORT CHIP 0
FL204 1-234-177-21 FILTER, CHIP EMI L501 1-216-295-00 SHORT CHIP 0
FL205 1-234-177-21 FILTER, CHIP EMI L704 1-412-031-11 INDUCTOR 47uH
FL206 1-234-177-21 FILTER, CHIP EMI L901 1-412-031-11 INDUCTOR 47uH
TEL
TEL
FL302 1-234-177-21 FILTER, CHIP EMI < TRANSISTOR >
FL352 1-234-177-21 FILTER, CHIP EMI Q201 8-729-929-26 TRANSISTOR DTC114TE
13942296513
13942296513
FL701 1-234-177-21 FILTER, CHIP EMI < RESISTOR >

FL703 1-234-177-21 FILTER, CHIP EMI R10 1-216-801-11 METAL CHIP 22 5% 1/10W
R13 1-216-801-11 METAL CHIP 22 5% 1/10W
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

R197 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
376315150 892498299
376315150 892498299
< TRANSISTOR/IC > R198 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R202 1-216-841-11 METAL CHIP 47K 5% 1/10W
IC111 6-550-554-01 TRANSISTOR UM6K1NL02TN R213 1-218-939-11 RES-CHIP 68 5% 1/16W
IC203 6-704-069-01 IC MT48LC4M32B2P-6-Y15W
* IC204 6-703-671-01 IC BR9040F-WE2 R215 1-216-864-11 SHORT CHIP 0
IC205 6-804-782-01 IC MR27V3202F-1BJTP03B7 R217 1-216-864-11 SHORT CHIP 0
IC207 6-703-540-01 IC ZIVA5X-C1F R219 1-216-864-11 SHORT CHIP 0
R220 1-216-864-11 SHORT CHIP 0
IC211 6-700-398-01 IC uPC2918T-E1 R221 1-216-864-11 SHORT CHIP 0
IC231 8-759-549-21 IC SN74LV573APWR
IC232 8-759-549-21 IC SN74LV573APWR R222 1-216-864-11 SHORT CHIP 0
R227 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
IC259 8-759-549-21 IC SN74LV573APWR
IC302 6-703-787-01 IC PCM1609KPTR R230 1-216-803-11 METAL CHIP 33 5% 1/10W
IC352 8-759-560-56 IC PCM1800E/2K R231 1-216-803-11 METAL CHIP 33 5% 1/10W
IC392 6-705-468-01 IC BA33BC0FP-E2 R232 1-216-803-11 METAL CHIP 33 5% 1/10W
R234 1-216-833-11 METAL CHIP 10K 5% 1/10W
IC501 6-702-157-01 IC FAN8035L R240 1-216-841-11 METAL CHIP 47K 5% 1/10W
IC502 8-759-583-47 IC uPC2933T-E2
IC503 8-759-058-43 IC NJM3404AV R241 1-216-864-11 SHORT CHIP 0
IC509 8-752-408-73 IC CXD3068Q R244 1-216-821-11 METAL CHIP 1K 5% 1/10W
IC701 6-703-552-01 IC TMC57929PGF-RDP R245 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R246 1-216-833-11 METAL CHIP 10K 5% 1/10W
IC703 8-759-058-43 IC NJM3404AV R247 1-216-821-11 METAL CHIP 1K 5% 1/10W
IC706 8-759-564-30 IC MSM51V18165B-60TSKR1
IC901 8-753-228-87 IC CXP973064-245R R248 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
www xiaoy u163. com

IC902 8-759-649-48 IC SN74AHC1G32DCKR R250 1-216-864-11 SHORT CHIP 0
IC903 6-704-004-01 IC BR24L16F-WE2 R251 1-216-864-11 SHORT CHIP 0
R253 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
IC904 6-704-753-01 IC SN74AHC2G74HDCUR R254 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
.
IC906 6-700-407-01 IC SM8707GV-G-E2
IC907 8-759-583-47 IC uPC2933T-E2 R255 1-216-864-11 SHORT CHIP 0
105
HCD-ZX10D
QQ 376315150 892498299
DMB07
R257 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R504 1-216-841-11 METAL CHIP 47K 5% 1/10W
R259 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R510 1-216-847-11 METAL CHIP 150K 5% 1/10W
R263 1-218-285-11 METAL CHIP 75 5% 1/10W R511 1-216-847-11 METAL CHIP 150K 5% 1/10W
R265 1-218-285-11 METAL CHIP 75 5% 1/10W
R515 1-216-833-11 METAL CHIP 10K 5% 1/10W
R268 1-216-864-11 SHORT CHIP 0 R516 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R270 1-216-864-11 SHORT CHIP 0
R521 1-216-845-11 METAL CHIP 100K 5% 1/10W
TEL
TEL
R274 1-216-864-11 SHORT CHIP 0 R523 1-216-833-11 METAL CHIP 10K 5% 1/10W
R275 1-216-864-11 SHORT CHIP 0
13942296513
13942296513
R527 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R280 1-218-285-11 METAL CHIP 75 5% 1/10W
R536 1-216-833-11 METAL CHIP 10K 5% 1/10W
R283 1-218-847-11 METAL CHIP 1K 0.5% 1/10W R537 1-216-843-11 METAL CHIP 68K 5% 1/10W
R284 1-218-829-11 METAL CHIP 180 0.5% 1/10W R545 1-216-833-11 METAL CHIP 10K 5% 1/10W
QQ
QQ
R290 1-216-809-11 METAL CHIP 100 5% 1/10W
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
R551 1-216-821-11 METAL CHIP 1K 5% 1/10W
R294 1-216-864-11 SHORT CHIP 0 R555 1-216-864-11 SHORT CHIP 0
R296 1-216-864-11 SHORT CHIP 0
R560 1-216-821-11 METAL CHIP 1K 5% 1/10W
R304 1-216-813-11 METAL CHIP 220 5% 1/10W
R565 1-216-821-11 METAL CHIP 1K 5% 1/10W
R308 1-216-813-11 METAL CHIP 220 5% 1/10W R567 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R309 1-216-813-11 METAL CHIP 220 5% 1/10W
R310 1-216-809-11 METAL CHIP 100 5% 1/10W R568 1-216-857-11 METAL CHIP 1M 5% 1/10W
R572 1-216-853-11 METAL CHIP 470K 5% 1/10W
R313 1-216-833-11 METAL CHIP 10K 5% 1/10W R576 1-216-864-11 SHORT CHIP 0
R314 1-216-801-11 METAL CHIP 22 5% 1/10W
R581 1-216-834-11 METAL CHIP 12K 5% 1/10W
R352 1-216-864-11 SHORT CHIP 0
R353 1-216-864-11 SHORT CHIP 0 R586 1-218-747-11 METAL CHIP 200K 0.5% 1/10W
www xiaoy u163. com

R588 1-216-833-11 METAL CHIP 10K 5% 1/10W
.
R392 1-216-797-11 METAL CHIP 10 5% 1/10W
106
HCD-ZX10D
QQ 376315150 892498299
DMB07
R601 1-216-864-11 SHORT CHIP 0
R789 1-216-845-11 METAL CHIP 100K 5% 1/10W
R700 1-216-832-11 METAL CHIP 8.2K 5% 1/10W
R707 1-216-809-11 METAL CHIP 100 5% 1/10W R901 1-216-801-11 METAL CHIP 22 5% 1/10W
R708 1-216-853-11 METAL CHIP 470K 5% 1/10W R902 1-216-801-11 METAL CHIP 22 5% 1/10W
R904 1-216-833-11 METAL CHIP 10K 5% 1/10W
R711 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R911 1-216-833-11 METAL CHIP 10K 5% 1/10W
TEL
TEL
R716 1-216-809-11 METAL CHIP 100 5% 1/10W
13942296513
13942296513
R917 1-216-821-11 METAL CHIP 1K 5% 1/10W
R721 1-216-839-11 METAL CHIP 33K 5% 1/10W
R725 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R922 1-216-801-11 METAL CHIP 22 5% 1/10W
R923 1-216-813-11 METAL CHIP 220 5% 1/10W
QQ
QQ
R728 1-216-833-11 METAL CHIP 10K 5% 1/10W
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
R929 1-216-809-11 METAL CHIP 100 5% 1/10W
R734 1-216-833-11 METAL CHIP 10K 5% 1/10W
R935 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R741 1-216-801-11 METAL CHIP 22 5% 1/10W
R943 1-216-809-11 METAL CHIP 100 5% 1/10W
R746 1-216-841-11 METAL CHIP 47K 5% 1/10W
R974 1-216-864-11 SHORT CHIP 0
R758 1-216-864-11 SHORT CHIP 0
R990 1-216-864-11 SHORT CHIP 0
R763 1-216-832-11 METAL CHIP 8.2K 5% 1/10W R994 1-216-864-11 SHORT CHIP 0
R764 1-216-857-11 METAL CHIP 1M 5% 1/10W R995 1-216-864-11 SHORT CHIP 0
R765 1-216-837-11 METAL CHIP 22K 5% 1/10W
www xiaoy u163. com

R998 1-216-864-11 SHORT CHIP 0
.
R778 1-216-845-11 METAL CHIP 100K 5% 1/10W
107
HCD-ZX10D
QQ 376315150 892498299
DMB07 FUNCTION SW GAME/HP JOG MAIN
R9981 1-216-864-11 SHORT CHIP 0 A-4752-631-A JOG BOARD, COMPLETE
R9982 1-216-864-11 SHORT CHIP 0 ********************
R9983 1-216-864-11 SHORT CHIP 0
R9984 1-216-864-11 SHORT CHIP 0 < CAPACITOR >
R9985 1-216-864-11 SHORT CHIP 0 C964 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R9999 1-216-864-11 SHORT CHIP 0
< LED >
< VIBRATOR >
D925 8-719-058-64 LED SEL5823A-TP15 (X-ROUND ON/OFF)
X901 1-781-945-21 VIBRATOR, CERAMIC (20MHz)
X902 1-795-630-11 VIBRATOR, CRYSTAL (27MHz) < TRANSISTOR >
************************************************************
FUNCTION SW BOARD
****************** < RESISTOR >
TEL
TEL
< RESISTOR > R871 1-216-809-11 METAL CHIP 100 5% 1/10W
R882 1-216-819-11 METAL CHIP 680 5% 1/10W
13942296513
13942296513
R884 1-216-821-11 METAL CHIP 1K 5% 1/10W
< SWITCH > R885 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
S930 1-771-410-21 SWITCH, TACTILE (FUNCTION) R886 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
************************************************************ R887 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R888 1-216-821-11 METAL CHIP 1K 5% 1/10W
A-4752-641-A GAME/HP BOARD, COMPLETE (E15, SP, MY) R889 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
A-4753-347-A GAME/HP BOARD, COMPLETE (AUS) R890 1-216-821-11 METAL CHIP 1K 5% 1/10W
************************
R891 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
QQ
QQ
< CAPACITOR > R892 1-216-821-11 METAL CHIP 1K 5% 1/10W
TEL 13942296513 QQ 376315150 892498299

R893 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
C840 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V R894 1-216-833-11 METAL CHIP 10K 5% 1/10W
376315150 892498299
376315150 892498299
C843 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < SWITCH/ROTARY ENCODER >
< CONNECTOR > S956 1-771-410-21 SWITCH, TACTILE (DISC 1)

S957 1-478-133-11 ENCODER, ROTARY (JOG)
* CN801 1-564-720-11 PIN, CONNECTOR (SMALL TYPE) 4P S958 1-771-410-21 SWITCH, TACTILE (DISC 2)
CN802 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P S959 1-771-410-21 SWITCH, TACTILE (DISC 3)
* CN803 1-564-719-11 PIN, CONNECTOR (SMALL TYPE) 3P S960 1-771-410-21 SWITCH, TACTILE (DISC 4)
< EARTH TERMINAL > S961 1-771-410-21 SWITCH, TACTILE (DISC 5)

S962 1-771-410-21 SWITCH, TACTILE (Z OPEN/CLOSE)
EPT803 1-537-738-21 TERMINAL, GROUND (E15, SP, MY) S963 1-771-410-21 SWITCH, TACTILE (EX-CHANGE)
EPT804 1-537-738-21 TERMINAL, GROUND (E15, SP, MY) S964 1-771-410-21 SWITCH, TACTILE (DISC SKIP)
S965 1-771-410-21 SWITCH, TACTILE (FLASH)
< JACK >
S966 1-771-410-21 SWITCH, TACTILE (X-ROUND ON/OFF)
J850 1-764-592-11 JACK 3P (GAME INPUT VIDEO/AUDIO) S967 1-771-410-21 SWITCH, TACTILE (MODE, SPEAKERS)
J851 1-770-226-11 JACK (LARGE TYPE) (PHONES) ************************************************************
< RESISTOR > A-4752-616-A MAIN BOARD, COMPLETE (SP, MY)

A-4753-446-A MAIN BOARD, COMPLETE (AUS)
R826 1-216-809-11 METAL CHIP 100 5% 1/10W A-4753-470-A MAIN BOARD, COMPLETE (E15)
R827 1-216-845-11 METAL CHIP 100K 5% 1/10W *********************
R828 1-216-845-11 METAL CHIP 100K 5% 1/10W
R829 1-216-821-11 METAL CHIP 1K 5% 1/10W 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
R830 1-216-821-11 METAL CHIP 1K 5% 1/10W
< CAPACITOR >
************************************************************
www xiaoy u163. com

C101 1-126-964-11 ELECT 10uF 20% 50V
C102 1-126-964-11 ELECT 10uF 20% 50V
C103 1-126-964-11 ELECT 10uF 20% 50V
C104 1-126-964-11 ELECT 10uF 20% 50V
.
C106 1-126-960-11 ELECT 1uF 20% 50V
108
HCD-ZX10D
QQ 376315150 892498299
MAIN
C107 1-164-156-11 CERAMIC CHIP 0.1uF 25V C170 1-162-961-11 CERAMIC CHIP 330PF 10% 50V
C108 1-126-947-11 ELECT 47uF 20% 35V C171 1-136-170-00 FILM 0.27uF 5% 50V
C110 1-126-964-11 ELECT 10uF 20% 50V C172 1-126-933-11 ELECT 100uF 20% 16V
C111 1-126-959-11 ELECT 0.47uF 20% 50V C173 1-126-933-11 ELECT 100uF 20% 16V
C174 1-126-935-11 ELECT 470uF 20% 16V
C116 1-126-933-11 ELECT 100uF 20% 16V
C117 1-126-961-11 ELECT 2.2uF 20% 50V C177 1-126-964-11 ELECT 10uF 20% 50V
C118 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C178 1-126-960-11 ELECT 1uF 20% 50V
C179 1-130-483-00 MYLAR 0.01uF 5% 50V
C120 1-126-964-11 ELECT 10uF 20% 50V C181 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C123 1-162-961-11 CERAMIC CHIP 330PF 10% 50V C183 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
TEL
TEL
C128 1-126-959-11 ELECT 0.47uF 20% 50V
13942296513
13942296513
C129 1-126-961-11 ELECT 2.2uF 20% 50V C187 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C130 1-136-497-81 FILM 0.1uF 5% 50V C188 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C191 1-137-150-11 FILM 0.01uF 5% 100V
C131 1-136-169-00 FILM 0.22uF 5% 50V C192 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C132 1-126-960-11 ELECT 1uF 20% 50V C194 1-130-481-00 MYLAR 0.0068uF 5% 50V
C134 1-162-963-11 CERAMIC CHIP 680PF 10% 50V C195 1-126-965-11 ELECT 22uF 20% 50V
C200 1-104-665-11 ELECT 100uF 20% 25V
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

C138 1-137-194-81 FILM 0.47uF 5% 50V
376315150 892498299
376315150 892498299
C140 1-136-170-00 FILM 0.27uF 5% 50V C204 1-126-964-11 ELECT 10uF 20% 50V
C205 1-126-964-11 ELECT 10uF 20% 50V
C210 1-126-964-11 ELECT 10uF 20% 50V
C146 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C211 1-136-497-81 FILM 0.1uF 5% 50V
C148 1-126-961-11 ELECT 2.2uF 20% 50V
C152 1-137-427-11 MYLAR 120PF 5% 50V C217 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C153 1-126-964-11 ELECT 10uF 20% 50V
C154 1-137-427-11 MYLAR 120PF 5% 50V C218 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C155 1-136-495-11 FILM 0.068uF 5% 50V C219 1-104-665-11 ELECT 100uF 20% 25V
C220 1-137-189-11 FILM 0.18uF 5% 50V
C158 1-137-194-81 FILM 0.47uF 5% 50V
C225 1-126-960-11 ELECT 1uF 20% 50V
C162 1-126-964-11 ELECT 10uF 20% 50V C226 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C164 1-126-964-11 ELECT 10uF 20% 50V
www xiaoy u163. com

C230 1-126-964-11 ELECT 10uF 20% 50V
.
C168 1-130-483-00 MYLAR 0.01uF 5% 50V C232 1-162-960-11 CERAMIC CHIP 220PF 10% 50V
C169 1-126-964-11 ELECT 10uF 20% 50V
109
HCD-ZX10D
QQ 376315150 892498299
MAIN
C508 1-130-473-00 MYLAR 0.0015uF 5% 50V
C238 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C509 1-130-479-00 MYLAR 0.0047uF 5% 50V
C241 1-126-964-11 ELECT 10uF 20% 50V
C242 1-162-960-11 CERAMIC CHIP 220PF 10% 50V C512 1-126-961-11 ELECT 2.2uF 20% 50V
C513 1-126-961-11 ELECT 2.2uF 20% 50V
C243 1-162-960-11 CERAMIC CHIP 220PF 10% 50V C514 1-162-953-11 CERAMIC CHIP 100PF 5% 50V
C246 1-126-964-11 ELECT 10uF 20% 50V
TEL
TEL
13942296513
13942296513
C252 1-126-960-11 ELECT 1uF 20% 50V
C292 1-126-963-11 ELECT 4.7uF 20% 50V C527 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C293 1-126-963-11 ELECT 4.7uF 20% 50V C529 1-164-156-11 CERAMIC CHIP 0.1uF 25V
QQ
QQ
C300 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C530 1-126-963-11 ELECT 4.7uF 20% 50V
TEL 13942296513 QQ 376315150 892498299

C301 1-164-156-11 CERAMIC CHIP 0.1uF 25V C531 1-126-963-11 ELECT 4.7uF 20% 50V
C302 1-126-947-11 ELECT 47uF 20% 35V
376315150 892498299
376315150 892498299
C533 1-126-960-11 ELECT 1uF 20% 50V
C305 1-164-156-11 CERAMIC CHIP 0.1uF 25V C535 1-126-960-11 ELECT 1uF 20% 50V
C306 1-126-947-11 ELECT 47uF 20% 35V C536 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C307 1-164-156-11 CERAMIC CHIP 0.1uF 25V (AUS)
C538 1-126-960-11 ELECT 1uF 20% 50V
C342 1-126-916-11 ELECT 1000uF 20% 6.3V C539 1-126-960-11 ELECT 1uF 20% 50V
C395 1-164-156-11 CERAMIC CHIP 0.1uF 25V C542 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C401 1-126-964-11 ELECT 10uF 20% 50V
(E15, SP, MY) C543 1-107-714-11 ELECT 10uF 20% 50V
C402 1-126-964-11 ELECT 10uF 20% 50V (AUS)
C403 1-136-497-81 FILM 0.1uF 5% 50V C545 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C404 1-136-497-81 FILM 0.1uF 5% 50V (AUS)
C411 1-162-917-11 CERAMIC CHIP 15PF 5% 50V C582 1-128-646-11 ELECT 1000uF 20% 6.3V
C414 1-164-156-11 CERAMIC CHIP 0.1uF 25V C584 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C416 1-104-656-11 ELECT 2200uF 20% 6.3V C585 1-112-020-01 ELECT 3300uF 6.3V
C498 1-126-916-11 ELECT 1000uF 20% 6.3V C591 1-104-665-11 ELECT 100uF 20% 25V
www xiaoy u163. com

.
C503 1-136-159-00 FILM 0.033uF 5% 50V C597 1-130-483-00 MYLAR 0.01uF 5% 50V
110
HCD-ZX10D
QQ 376315150 892498299
MAIN
C598 1-130-483-00 MYLAR 0.01uF 5% 50V FL585 1-234-177-21 FILTER, CHIP EMI (AUS)
C599 1-130-483-00 MYLAR 0.01uF 5% 50V
< IC >
< CONNECTOR >
IC101 6-705-667-01 IC M61537FP-RF0G
* CN101 1-568-449-11 HOUSING, CONNECTOR (PC BOARD) 3P IC401 6-804-822-01 IC M30620MCN-A42FPU0
* CN104 1-569-930-11 SOCKET, CONNECTOR 13P IC402 6-705-809-01 IC BD4929G-TR
CN401 1-785-316-11 PIN, CONNECTOR (STRAIGHT) 4P IC501 6-703-651-11 IC M61530FP-D60G
CN402 1-785-322-11 PIN, CONNECTOR (STRAIGHT) 10P IC510 6-703-550-01 IC TA7809LS
CN404 1-779-275-11 CONNECTOR, FFC (LIF (NON-ZIF)) 7P
IC511 6-703-550-01 IC TA7809LS
* CN502 1-564-709-11 PIN, CONNECTOR (SMALL TYPE) 7P IC513 6-703-547-01 IC TA7805LS
CN503 1-779-289-11 CONNECTOR, FFC (LIF (NON-ZIF)) 21P IC514 8-759-598-69 IC BA6956AN
CN504 1-569-906-11 SOCKET, CONNECTOR 11P IC515 8-759-598-69 IC BA6956AN
CN505 1-778-982-11 CONNECTOR, BOARD TO BOARD 13P IC516 8-759-518-68 IC PQ12RF21
CN506 1-778-982-11 CONNECTOR, BOARD TO BOARD 13P
IC517 6-700-812-01 IC SI-8050JF
TEL
TEL
CN507 1-568-838-11 CONNECTOR, FFC 21P IC518 6-700-813-01 IC SI-8033JF
CN508 1-691-775-11 PLUG (MICRO CONNECTOR) 13P IC519 8-759-710-97 IC NJM4565M-D
CN509 1-785-323-11 PIN, CONNECTOR (STRAIGHT) 11P
CN513 1-564-506-11 PLUG, CONNECTOR 3P < JACK >
13942296513
13942296513
< DIODE > J202 1-770-377-31 JACK, PIN 1P (SUBWOOFER OUT)
J701 1-774-411-11 JACK, PIN 6P
D192 8-719-404-50 DIODE MA111-TX (VIDEO/SAT OUT, VIDEO/SAT IN, PHONO IN)
D193 8-719-404-50 DIODE MA111-TX
D194 8-719-404-50 DIODE MA111-TX < SHORT >
D329 8-719-404-50 DIODE MA111-TX (E15, SP, MY)
D402 8-719-404-50 DIODE MA111-TX JR102 1-216-864-11 SHORT CHIP 0
JR103 1-216-864-11 SHORT CHIP 0
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

D406 8-719-404-50 DIODE MA111-TX
376315150 892498299
376315150 892498299
JR109 1-216-296-11 SHORT CHIP 0
D408 6-500-522-21 DIODE 10EDB40-TB3 JR110 1-216-296-11 SHORT CHIP 0
D501 8-719-500-56 DIODE D3SBA20 JR111 1-216-864-11 SHORT CHIP 0
D502 8-719-500-60 DIODE D5SBA20 JR112 1-216-864-11 SHORT CHIP 0
D553 8-719-069-56 DIODE UDZSTE-176.2B
D554 8-719-056-84 DIODE UDZ-TE-17-7.5B JR113 1-216-864-11 SHORT CHIP 0
JR114 1-216-864-11 SHORT CHIP 0
D580 8-719-080-53 DIODE RK36LF-B3 JR115 1-216-864-11 SHORT CHIP 0
D581 8-719-080-53 DIODE RK36LF-B3 JR116 1-216-864-11 SHORT CHIP 0
JR118 1-216-296-11 SHORT CHIP 0
< EARTH TERMINAL >
JR119 1-216-864-11 SHORT CHIP 0
EPT501 1-537-738-21 TERMINAL, GROUND JR131 1-216-864-11 SHORT CHIP 0
JR204 1-216-296-11 SHORT CHIP 0
< FERRITE BEAD/SHORT > JR205 1-216-296-11 SHORT CHIP 0
JR206 1-216-864-11 SHORT CHIP 0
FB416 1-414-864-11 FERRITE, EMI (SMD) (1608)
FB462 1-414-864-11 FERRITE, EMI (SMD) (1608) JR207 1-216-864-11 SHORT CHIP 0
FB500 1-216-864-11 SHORT CHIP 0 JR208 1-216-296-11 SHORT CHIP 0
JR211 1-216-296-11 SHORT CHIP 0
FB503 1-216-864-11 SHORT CHIP 0
FB582 1-216-864-11 SHORT CHIP 0 (E15, SP, MY) JR212 1-216-864-11 SHORT CHIP 0
FB582 1-500-284-21 INDUCTOR, FERRITE BEAD (AUS) JR213 1-216-296-11 SHORT CHIP 0
FB583 1-500-284-21 INDUCTOR, FERRITE BEAD (AUS) JR215 1-216-296-11 SHORT CHIP 0
JR216 1-216-296-11 SHORT CHIP 0
www xiaoy u163. com

FB584 1-216-296-11 SHORT CHIP 0 (E15, SP, MY)
JR218 1-216-864-11 SHORT CHIP 0
< FILTER > JR270 1-216-864-11 SHORT CHIP 0
.
JR300 1-216-296-11 SHORT CHIP 0
FL584 1-234-177-21 FILTER, CHIP EMI (AUS)
111
HCD-ZX10D
QQ 376315150 892498299
MAIN
JR400 1-216-296-11 SHORT CHIP 0 Q140 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
Q145 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
JR401 1-216-296-11 SHORT CHIP 0 Q165 6-550-889-01 TRANSISTOR 2SC5938-7112-1B
JR402 1-216-864-11 SHORT CHIP 0 (AUS) Q180 6-550-889-01 TRANSISTOR 2SC5938-7112-1B
JR403 1-216-864-11 SHORT CHIP 0
JR404 1-216-864-11 SHORT CHIP 0 Q190 8-729-027-43 TRANSISTOR DTC114EKA-T146
JR405 1-216-296-11 SHORT CHIP 0 Q191 8-729-903-46 TRANSISTOR 2SB1132-P
JR408 1-216-296-11 SHORT CHIP 0
JR441 1-216-864-11 SHORT CHIP 0 Q199 6-550-889-01 TRANSISTOR 2SC5938-7112-1B
JR471 1-216-864-11 SHORT CHIP 0 Q200 8-729-120-28 TRANSISTOR 2SC1623-L5L6
JR475 1-216-296-11 SHORT CHIP 0
TEL
TEL
JR500 1-216-296-11 SHORT CHIP 0 Q201 8-729-120-28 TRANSISTOR 2SC1623-L5L6
JR501 1-216-864-11 SHORT CHIP 0 Q202 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
Q203 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
13942296513
13942296513
JR504 1-216-296-11 SHORT CHIP 0
JR512 1-216-296-11 SHORT CHIP 0
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
JR517 1-216-864-11 SHORT CHIP 0
JR518 1-216-864-11 SHORT CHIP 0 Q292 8-729-027-31 TRANSISTOR DTA124EKA-T146
< COIL > Q402 8-729-027-43 TRANSISTOR DTC114EKA-T146
(E15, SP, MY)
L102 1-412-064-11 INDUCTOR 100uH Q506 8-729-027-43 TRANSISTOR DTC114EKA-T146
L103 1-410-780-11 INDUCTOR 27mH
L104 1-410-780-11 INDUCTOR 27mH Q509 8-729-027-43 TRANSISTOR DTC114EKA-T146
L300 1-412-058-11 INDUCTOR 10uH Q523 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
L580 1-456-468-11 INDUCTOR 100uH Q524 6-550-889-01 TRANSISTOR 2SC5938-T112-1B
L581 1-456-467-11 INDUCTOR 100uH Q529 8-729-027-31 TRANSISTOR DTA124EKA-T146
< TRANSISTOR > Q530 8-729-027-43 TRANSISTOR DTC114EKA-T146

Q531 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q101 8-729-141-75 TRANSISTOR 2SD596DV345 Q532 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q102 8-729-802-80 TRANSISTOR 2SC3661 Q533 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q103 8-729-802-80 TRANSISTOR 2SC3661 Q534 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q104 6-550-185-01 TRANSISTOR RT1P137P-TP-1
Q105 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q535 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q106 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q537 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q107 8-729-027-31 TRANSISTOR DTA124EKA-T146 Q538 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q108 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q539 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q110 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q540 8-729-027-31 TRANSISTOR DTA124EKA-T146
Q552 6-550-185-01 TRANSISTOR RT1P137P-TP-1
Q111 8-729-802-80 TRANSISTOR 2SC3661 Q553 8-729-026-68 TRANSISTOR 2SD2525 (TP)
www xiaoy u163. com

Q112 8-729-802-80 TRANSISTOR 2SC3661 Q554 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q113 8-729-802-80 TRANSISTOR 2SC3661 Q555 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
Q114 8-729-802-80 TRANSISTOR 2SC3661
Q115 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q557 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
.
Q563 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q116 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q590 8-729-014-97 TRANSISTOR FA1L3Z-T1B (E15, SP, MY)
112
HCD-ZX10D
QQ 376315150 892498299
MAIN
R159 1-216-864-11 SHORT CHIP 0
< RESISTOR > R160 1-216-841-11 METAL CHIP 47K 5% 1/10W
R161 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
R101 1-216-841-11 METAL CHIP 47K 5% 1/10W R162 1-216-857-11 METAL CHIP 1M 5% 1/10W
R103 1-216-864-11 SHORT CHIP 0
R167 1-216-834-11 METAL CHIP 12K 5% 1/10W
R108 1-216-838-11 METAL CHIP 27K 5% 1/10W
R172 1-216-864-11 SHORT CHIP 0
R111 1-216-835-11 METAL CHIP 15K 5% 1/10W R173 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
TEL
TEL
R112 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R174 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R113 1-216-809-11 METAL CHIP 100 5% 1/10W
13942296513
13942296513
R177 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R119 1-216-833-11 METAL CHIP 10K 5% 1/10W
R182 1-216-809-11 METAL CHIP 100 5% 1/10W
R124 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

R187 1-216-809-11 METAL CHIP 100 5% 1/10W
376315150 892498299
376315150 892498299
R129 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R192 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R132 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R193 1-216-833-11 METAL CHIP 10K 5% 1/10W
R133 1-216-857-11 METAL CHIP 1M 5% 1/10W R194 1-216-819-11 METAL CHIP 680 5% 1/10W
R134 1-216-817-11 METAL CHIP 470 5% 1/10W
R197 1-216-837-11 METAL CHIP 22K 5% 1/10W
R139 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R202 1-216-841-11 METAL CHIP 47K 5% 1/10W
R145 1-216-833-11 METAL CHIP 10K 5% 1/10W
R207 1-216-833-11 METAL CHIP 10K 5% 1/10W
R149 1-216-864-11 SHORT CHIP 0 R208 1-216-817-11 METAL CHIP 470 5% 1/10W
R151 1-216-833-11 METAL CHIP 10K 5% 1/10W
R152 1-216-809-11 METAL CHIP 100 5% 1/10W R210 1-216-864-11 SHORT CHIP 0
R153 1-216-864-11 SHORT CHIP 0 R211 1-216-857-11 METAL CHIP 1M 5% 1/10W
www xiaoy u163. com

R212 1-216-857-11 METAL CHIP 1M 5% 1/10W
R156 1-216-805-11 METAL CHIP 47 5% 1/10W
.
113
HCD-ZX10D
QQ 376315150 892498299
MAIN
R278 1-216-821-11 METAL CHIP 1K 5% 1/10W
R221 1-216-821-11 METAL CHIP 1K 5% 1/10W
R283 1-216-833-11 METAL CHIP 10K 5% 1/10W
R226 1-216-841-11 METAL CHIP 47K 5% 1/10W
R288 1-216-833-11 METAL CHIP 10K 5% 1/10W
TEL
TEL
R231 1-216-841-11 METAL CHIP 47K 5% 1/10W
13942296513
13942296513
R293 1-216-821-11 METAL CHIP 1K 5% 1/10W
R236 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R298 1-216-853-11 METAL CHIP 470K 5% 1/10W
R241 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

R303 1-216-845-11 METAL CHIP 100K 5% 1/10W
376315150 892498299
376315150 892498299
R246 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R308 1-216-839-11 METAL CHIP 33K 5% 1/10W
R251 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R313 1-216-809-11 METAL CHIP 100 5% 1/10W
R256 1-216-817-11 METAL CHIP 470 5% 1/10W
R318 1-216-809-11 METAL CHIP 100 5% 1/10W
R261 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(E15)
R266 1-216-833-11 METAL CHIP 10K 5% 1/10W (AUS)
R267 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R393 1-216-864-11 SHORT CHIP 0 (SP, MY)
R268 1-216-821-11 METAL CHIP 1K 5% 1/10W
www xiaoy u163. com

R397 1-216-833-11 METAL CHIP 10K 5% 1/10W
.
R273 1-216-821-11 METAL CHIP 1K 5% 1/10W
114
HCD-ZX10D
QQ 376315150 892498299
MAIN
R419 1-216-809-11 METAL CHIP 100 5% 1/10W
R510 1-216-854-11 METAL CHIP 560K 5% 1/10W
R424 1-216-809-11 METAL CHIP 100 5% 1/10W
R515 1-216-841-11 METAL CHIP 47K 5% 1/10W
R429 1-216-809-11 METAL CHIP 100 5% 1/10W
R520 1-216-821-11 METAL CHIP 1K 5% 1/10W
TEL
TEL
13942296513
13942296513
(E15, SP, MY)
R526 1-216-821-11 METAL CHIP 1K 5% 1/10W
R444 1-216-833-11 METAL CHIP 10K 5% 1/10W
R531 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

R449 1-216-833-11 METAL CHIP 10K 5% 1/10W
376315150 892498299
376315150 892498299
R558 1-216-821-11 METAL CHIP 1K 5% 1/10W
R454 1-216-833-11 METAL CHIP 10K 5% 1/10W
R563 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R473 1-216-833-11 METAL CHIP 10K 5% 1/10W
R569 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
R481 1-216-809-11 METAL CHIP 100 5% 1/10W
R574 1-216-841-11 METAL CHIP 47K 5% 1/10W
R493 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(E15, AUS) R578 1-216-845-11 METAL CHIP 100K 5% 1/10W
R580 1-216-805-11 METAL CHIP 47 5% 1/10W
www xiaoy u163. com

R502 1-216-821-11 METAL CHIP 1K 5% 1/10W
R585 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
.
115
HCD-ZX10D
QQ 376315150 892498299
MAIN MD-94 MIC
(E15, SP, MY) C831 1-126-959-11 ELECT 0.47uF 20% 50V
R591 1-216-824-11 METAL CHIP 1.8K 5% 1/10W C832 1-126-960-11 ELECT 1uF 20% 50V
(E15, SP, MY)
C833 1-136-167-00 FILM 0.15uF 5% 50V
< TRANSFORMER > C834 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
T101 1-433-372-11 TRANSFORMER, BIAS OSCILLATION < CONNECTOR >
< VIBRATOR > * CN920 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3P

X401 1-760-252-12 VIBRATOR, CRYSTAL (32.768kHz)
X402 1-795-482-11 VIBRATOR, CERAMIC (16MHz) < DIODE >
************************************************************
D801 8-719-069-54 DIODE UDZSTE-175.1B
MD-94 BOARD
TEL
TEL
************ < EARTH TERMINAL >
< CONNECTOR > EPT801 1-537-738-21 TERMINAL, GROUND

13942296513
13942296513
CN001 1-506-490-21 PIN, CONNECTOR 11P < IC >
CN002 1-784-767-11 CONNECTOR, FFC 6P
* CN003 1-564-013-11 PIN, CONNECTOR 3P IC850 8-759-710-97 IC NJM4565M-D
CN004 1-506-481-11 PIN, CONNECTOR 2P IC851 8-759-496-41 IC M65850FP-E1
< SWITCH > < JACK >
S001 1-786-514-21 SWITCH, LEVER (SLIDE) J801 1-770-226-11 JACK (LARGE TYPE) (MIC 1)
(TRAY OPEN/CLOSE DETECT) J802 1-770-226-11 JACK (LARGE TYPE) (MIC 2)
************************************************************
QQ
QQ
< RESISTOR >
TEL 13942296513 QQ 376315150 892498299

A-4752-629-A MIC BOARD, COMPLETE (E15, SP, MY)
A-4753-359-A MIC BOARD, COMPLETE (AUS) R800 1-216-864-11 SHORT CHIP 0
376315150 892498299
376315150 892498299
******************** R801 1-216-845-11 METAL CHIP 100K 5% 1/10W
R802 1-216-833-11 METAL CHIP 10K 5% 1/10W
< CAPACITOR > R803 1-216-833-11 METAL CHIP 10K 5% 1/10W
R804 1-216-809-11 METAL CHIP 100 5% 1/10W
C801 1-126-934-11 ELECT 220uF 20% 16V
C802 1-126-961-11 ELECT 2.2uF 20% 50V R805 1-216-847-11 METAL CHIP 150K 5% 1/10W
C804 1-164-217-11 CERAMIC CHIP 150PF 5% 50V R806 1-216-833-11 METAL CHIP 10K 5% 1/10W
C805 1-126-964-11 ELECT 10uF 20% 50V R807 1-216-809-11 METAL CHIP 100 5% 1/10W
R809 1-216-821-11 METAL CHIP 1K 5% 1/10W
C807 1-126-961-11 ELECT 2.2uF 20% 50V
R814 1-216-833-11 METAL CHIP 10K 5% 1/10W
C812 1-126-960-11 ELECT 1uF 20% 50V
C814 1-126-961-11 ELECT 2.2uF 20% 50V R816 1-216-815-11 METAL CHIP 330 5% 1/10W
R819 1-216-837-11 METAL CHIP 22K 5% 1/10W
C821 1-126-960-11 ELECT 1uF 20% 50V R822 1-216-837-11 METAL CHIP 22K 5% 1/10W
R824 1-216-835-11 METAL CHIP 15K 5% 1/10W
www xiaoy u163. com

C825 1-126-947-11 ELECT 47uF 20% 35V R1344 1-216-815-11 METAL CHIP 330 5% 1/10W
C826 1-136-495-11 FILM 0.068uF 5% 50V
C827 1-136-495-11 FILM 0.068uF 5% 50V < VARIABLE RESISTOR >
C828 1-126-959-11 ELECT. 0.47uF 20% 50V RV801 1-227-452-11 RES, VAR, CARBON 50K (MIC LEVEL)
116
HCD-ZX10D
QQ 376315150 892498299
PANEL
RV802 1-227-452-11 RES, VAR, CARBON 50K (ECHO LEVEL) C961 1-126-963-11 ELECT 4.7uF 20% 50V
************************************************************
A-4752-625-A PANEL BOARD, COMPLETE (E15, SP, MY) C973 1-126-916-11 ELECT 1000uF 20% 6.3V
A-4753-357-A PANEL BOARD, COMPLETE (AUS)
********************** < CONNECTOR >
4-253-178-01 HOLDER FL CN906 1-569-914-11 S0CKET, CONNECTOR 21P

< CAPACITOR > CN913 1-785-341-11 PIN, CONNECTOR (LIGHT ANGLE) 15P
CNS928 1-770-401-11 HOUSING, CONNECTOR (PC BOARD) 8P
C900 1-126-163-11 ELECT 4.7uF 20% 50V
C903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < DIODE >
C905 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V D900 8-719-404-50 DIODE MA111-TX
D902 8-719-404-50 DIODE MA111-TX
TEL
TEL
C917 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V D904 6-500-508-01 DIODE RR263M-400FTR
C918 1-126-518-11 ELECT 470uF 20% 4V
C919 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V D905 8-719-069-54 DIODE UDZSTE-175.1B
13942296513
13942296513
C920 1-126-947-11 ELECT 47uF 20% 35V D906 8-719-058-03 LED SEL5423E-TP15 (TUNER/BAND)
D927 6-500-508-01 DIODE RR263M-400FTR
C922 1-126-964-11 ELECT 10uF 20% 50V < SHORT/FERRITE BEAD >
C924 1-162-959-11 CERAMIC CHIP 330PF 5% 50V FB901 1-216-864-11 SHORT CHIP 0 (E15, SP, MY)
C925 1-162-959-11 CERAMIC CHIP 330PF 5% 50V FB901 1-469-324-21 FERRITE, EMI (SMD) (2012) (AUS)
FB931 1-216-864-11 SHORT CHIP 0 (E15, SP, MY)
C926 1-162-959-11 CERAMIC CHIP 330PF 5% 50V FB931 1-414-760-21 FERRITE, EMI (SMD) (1608) (AUS)
QQ
QQ
C928 1-162-959-11 CERAMIC CHIP 330PF 5% 50V < FLUORESCENT INDICATOR >
TEL 13942296513 QQ 376315150 892498299

C930 1-162-959-11 CERAMIC CHIP 330PF 5% 50V FL901 1-518-978-11 VACUUM FLUORESCENT DISPLAYS
376315150 892498299
376315150 892498299
C931 1-162-959-11 CERAMIC CHIP 330PF 5% 50V < IC >
C933 1-162-959-11 CERAMIC CHIP 330PF 5% 50V IC901 6-803-974-01 IC MB90M407PF-G-142-BNDE1
C934 1-162-959-11 CERAMIC CHIP 330PF 5% 50V IC902 6-600-174-01 IC RPM7240-H4 ( )
C935 1-162-959-11 CERAMIC CHIP 330PF 5% 50V IC903 6-705-678-01 IC NJM2760V-TE2
C936 1-162-959-11 CERAMIC CHIP 330PF 5% 50V < SHORT >

C938 1-162-959-11 CERAMIC CHIP 330PF 5% 50V JR916 1-216-864-11 SHORT CHIP 0
C941 1-162-959-11 CERAMIC CHIP 330PF 5% 50V < TRANSISTOR >

C944 1-126-964-11 ELECT 10uF 20% 50V Q901 8-729-027-56 TRANSISTOR DTC143TKA-T146
C945 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V Q902 8-729-027-56 TRANSISTOR DTC143TKA-T146
C946 1-164-315-11 CERAMIC CHIP 470PF 5% 50V Q903 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q904 8-729-903-46 TRANSISTOR 2SB1132-P
C947 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V Q905 8-729-027-43 TRANSISTOR DTC114EKA-T146
C949 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V Q906 8-729-903-46 TRANSISTOR 2SB1132-P
C950 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V Q908 8-729-027-43 TRANSISTOR DTC114EKA-T146
C951 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
< RESISTOR >
C953 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V R897 1-216-817-11 METAL CHIP 470 5% 1/10W
C954 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V R898 1-216-817-11 METAL CHIP 470 5% 1/10W
C955 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V R899 1-216-817-11 METAL CHIP 470 5% 1/10W
www xiaoy u163. com

R901 1-216-833-11 METAL CHIP 10K 5% 1/10W
C957 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
.
C959 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V R903 1-216-809-11 METAL CHIP 100 5% 1/10W
C960 1-126-960-11 ELECT 1uF 20% 50V
117
HCD-ZX10D
QQ 376315150 892498299
PANEL POWER
R905 1-216-835-11 METAL CHIP 15K 5% 1/10W S903 1-771-410-21 SWITCH, TACTILE (SLEEP)
R906 1-216-835-11 METAL CHIP 15K 5% 1/10W S921 1-771-410-21 SWITCH, TACTILE (TUNER/BAND)
R907 1-216-835-11 METAL CHIP 15K 5% 1/10W S922 1-771-410-21 SWITCH, TACTILE (TUNING –)
R908 1-216-835-11 METAL CHIP 15K 5% 1/10W S923 1-771-410-21 SWITCH, TACTILE (TUNING +)
R909 1-216-835-11 METAL CHIP 15K 5% 1/10W S924 1-771-410-21 SWITCH, TACTILE (TUNER ENTER)
R910 1-216-835-11 METAL CHIP 15K 5% 1/10W S925 1-771-410-21 SWITCH, TACTILE (MEMORY)
R911 1-216-864-11 SHORT CHIP 0 S926 1-771-410-21 SWITCH, TACTILE (FM MODE)
R912 1-216-833-11 METAL CHIP 10K 5% 1/10W S927 1-771-410-21 SWITCH, TACTILE (TUNING MODE)
R913 1-216-864-11 SHORT CHIP 0 S928 1-771-410-21 SWITCH, TACTILE (DISPLAY)
R914 1-216-833-11 METAL CHIP 10K 5% 1/10W
R915 1-216-809-11 METAL CHIP 100 5% 1/10W < VIBRATOR >
R916 1-216-821-11 METAL CHIP 1K 5% 1/10W
X601 1-781-282-51 VIBRATOR, CERAMIC (4MHz)
R917 1-216-833-11 METAL CHIP 10K 5% 1/10W ************************************************************
R918 1-216-821-11 METAL CHIP 1K 5% 1/10W
TEL
TEL
R919 1-216-833-11 METAL CHIP 10K 5% 1/10W A-4752-643-A POWER BOARD, COMPLETE (E15, SP, MY)
R922 1-216-857-11 METAL CHIP 1M 5% 1/10W A-4753-338-A POWER BOARD, COMPLETE (AUS)
R938 1-216-845-11 METAL CHIP 100K 5% 1/10W ***********************
13942296513
13942296513
R939 1-216-845-11 METAL CHIP 100K 5% 1/10W 7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3
R940 1-216-837-11 METAL CHIP 22K 5% 1/10W
R941 1-216-809-11 METAL CHIP 100 5% 1/10W < CAPACITOR >
R942 1-216-809-11 METAL CHIP 100 5% 1/10W
R944 1-216-805-11 METAL CHIP 47 5% 1/10W C600 1-126-963-11 ELECT 4.7uF 20% 50V
R945 1-216-841-11 METAL CHIP 47K 5% 1/10W C602 1-104-665-11 ELECT 100uF 20% 25V
R946 1-216-843-11 METAL CHIP 68K 5% 1/10W C604 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R948 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

C609 1-128-560-11 ELECT 22uF 20% 100V
376315150 892498299
376315150 892498299
R951 1-216-830-11 METAL CHIP 5.6K 5% 1/10W C616 1-136-495-11 FILM 0.068uF 5% 50V
R952 1-216-821-11 METAL CHIP 1K 5% 1/10W C617 1-136-495-11 FILM 0.068uF 5% 50V
R953 1-216-821-11 METAL CHIP 1K 5% 1/10W
R954 1-216-833-11 METAL CHIP 10K 5% 1/10W C627 1-126-961-11 ELECT 2.2uF 20% 50V
C628 1-126-933-11 ELECT 100uF 20% 16V
R956 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C629 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R958 1-216-819-11 METAL CHIP 680 5% 1/10W C635 1-104-665-11 ELECT 100uF 20% 25V
R959 1-216-817-11 METAL CHIP 470 5% 1/10W
C637 1-107-721-11 ELECT 4.7uF 20% 100V
R986 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C650 1-126-963-11 ELECT 4.7uF 20% 50V
R987 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
C652 1-104-665-11 ELECT 100uF 20% 25V
R989 1-216-827-11 METAL CHIP 3.3K 5% 1/10W C654 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R994 1-216-821-11 METAL CHIP 1K 5% 1/10W
R997 1-216-817-11 METAL CHIP 470 5% 1/10W C657 1-137-749-11 MYLAR 0.1uF 100V
C658 1-127-812-11 ELECT 3300uF 20% 63V
R998 1-216-821-11 METAL CHIP 1K 5% 1/10W C659 1-136-497-81 FILM 0.1uF 5% 50V
R999 1-216-864-11 SHORT CHIP 0 C662 1-126-964-11 ELECT 10uF 20% 50V
R1351 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1352 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C666 1-136-495-11 FILM 0.068uF 5% 50V
(E15, SP, MY) C667 1-136-495-11 FILM 0.068uF 5% 50V
www xiaoy u163. com

C676 1-127-815-11 ELECT 3300uF 20% 100V
< SWITCH > C677 1-137-749-11 MYLAR 0.1uF 100V
C678 1-127-812-11 ELECT 3300uF 20% 63V
S900 1-771-410-21 SWITCH, TACTILE (ILLUMINATION)
.
S901 1-771-410-21 SWITCH, TACTILE (CLOCK TIMER SET) C679 1-136-497-81 FILM 0.1uF 5% 50V
S902 1-771-410-21 SWITCH, TACTILE (CLOCK TIMER SELECT) C690 1-164-156-11 CERAMIC CHIP 0.1uF 25V
118
HCD-ZX10D
QQ 376315150 892498299
POWER
C691 1-162-974-11 CERAMIC CHIP 0.01uF 50V Q641 8-729-802-80 TRANSISTOR 2SC3661
C692 1-162-974-11 CERAMIC CHIP 0.01uF 50V Q644 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
C693 1-162-974-11 CERAMIC CHIP 0.01uF 50V Q647 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
C694 1-162-974-11 CERAMIC CHIP 0.01uF 50V Q664 8-729-024-93 TRANSISTOR 2SB1565E
Q668 8-729-924-99 TRANSISTOR 2SC3722K-E
< CONNECTOR >
< RESISTOR >
CN601 1-778-981-21 CONNECTOR, BOARD TO BOARD 13P R600 1-216-821-11 METAL CHIP 1K 5% 1/10W
CN602 1-778-981-21 CONNECTOR, BOARD TO BOARD 13P R601 1-216-841-11 METAL CHIP 47K 5% 1/10W
* CN606 1-764-333-11 PLUG, CONNECTOR 10P R602 1-216-813-11 METAL CHIP 220 5% 1/10W
R603 1-216-841-11 METAL CHIP 47K 5% 1/10W
< DIODE > R604 1-216-833-11 METAL CHIP 10K 5% 1/10W
D609 8-719-404-50 DIODE MA111-TX R605 1-216-833-11 METAL CHIP 10K 5% 1/10W
TEL
TEL
D611 8-719-083-66 DIODE UDZSTE-1718B R606 1-216-841-11 METAL CHIP 47K 5% 1/10W
D612 8-719-083-66 DIODE UDZSTE-1718B R607 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
13942296513
13942296513
D654 8-719-404-50 DIODE MA111-TX 0 R612 1-245-605-51 FUSIBLE 100 5% 1/4W F
D655 8-719-404-50 DIODE MA111-TX 0 R613 1-215-869-11 METAL OXIDE 1K 5% 1W F
D656 8-719-060-53 DIODE RBV-2506 0 R614 1-215-869-11 METAL OXIDE 1K 5% 1W F
D658 8-719-060-53 DIODE RBV-2506 0 R615 1-245-605-51 FUSIBLE 100 5% 1/4W F

D660 8-719-404-50 DIODE MA111-TX 0 R616 1-217-637-00 FUSIBLE 1 5% 1/4W F
QQ
QQ
D664 8-719-083-87 DIODE UDZSTE-1733B 0 R618 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F
TEL 13942296513 QQ 376315150 892498299

376315150 892498299
376315150 892498299
< EARTH TERMINAL > R620 1-216-835-11 METAL CHIP 15K 5% 1/10W
R621 1-216-847-11 METAL CHIP 150K 5% 1/10W
EP605 1-537-738-21 TERMINAL, GROUND R622 1-245-711-31 CARBON 10 5% 1/2W
R623 1-216-842-11 METAL CHIP 56K 5% 1/10W
< IC > R624 1-216-837-11 METAL CHIP 22K 5% 1/10W
IC600 6-600-171-01 IC STK412-230 R625 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

IC627 6-703-610-01 IC RT8H015C-T112-1 R626 1-216-845-11 METAL CHIP 100K 5% 1/10W
R628 1-216-839-11 METAL CHIP 33K 5% 1/10W
< SHORT > R629 1-216-809-11 METAL CHIP 100 5% 1/10W
R630 1-216-845-11 METAL CHIP 100K 5% 1/10W
JR647 1-216-864-11 SHORT CHIP 0
R631 1-216-845-11 METAL CHIP 100K 5% 1/10W
< COIL > R632 1-216-854-11 METAL CHIP 560K 5% 1/10W
R633 1-216-841-11 METAL CHIP 47K 5% 1/10W
L680 1-420-872-52 COIL, AIR-CORE (AUS) R634 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
L682 1-420-872-52 COIL, AIR-CORE (AUS) R635 1-216-833-11 METAL CHIP 10K 5% 1/10W
L684 1-420-872-52 COIL, AIR-CORE (AUS)
L686 1-420-872-52 COIL, AIR-CORE (AUS) 0 R636 1-215-891-11 METAL OXIDE 680 5% 2W F
L688 1-420-872-52 COIL, AIR-CORE (AUS) 0 R637 1-215-891-11 METAL OXIDE 680 5% 2W F
R638 1-216-845-11 METAL CHIP 100K 5% 1/10W
< TRANSISTOR > R639 1-216-845-11 METAL CHIP 100K 5% 1/10W
R640 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q606 8-729-821-00 TRANSISTOR 2SA1207 R641 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q610 8-729-924-99 TRANSISTOR 2SC3722K-E R642 1-216-806-11 METAL CHIP 56 5% 1/10W
Q618 8-729-924-99 TRANSISTOR 2SC3722K-E R643 1-216-806-11 METAL CHIP 56 5% 1/10W
Q628 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R R644 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
0 R646 1-215-863-11 METAL OXIDE 100 5% 1W F
www xiaoy u163. com

Q634 8-729-027-31 TRANSISTOR DTA124EKA-T146 R649 1-216-834-11 METAL CHIP 12K 5% 1/10W
Q635 8-729-027-43 TRANSISTOR DTC114EKA-T146 R650 1-216-821-11 METAL CHIP 1K 5% 1/10W
.
Q640 8-729-802-80 TRANSISTOR 2SC3661 R651 1-216-841-11 METAL CHIP 47K 5% 1/10W
R652 1-216-813-11 METAL CHIP 220 5% 1/10W

119
HCD-ZX10D
QQ 376315150 892498299
POWER POWER SW RF
R653 1-216-841-11 METAL CHIP 47K 5% 1/10W < RESISTOR >
R654 1-216-841-11 METAL CHIP 47K 5% 1/10W
R1341 1-216-809-11 METAL CHIP 100 5% 1/10W
R659 1-216-849-11 METAL CHIP 220K 5% 1/10W
R660 1-216-834-11 METAL CHIP 12K 5% 1/10W < SWITCH >
R661 1-216-834-11 METAL CHIP 12K 5% 1/10W
R662 1-216-832-11 METAL CHIP 8.2K 5% 1/10W S929 1-771-410-21 SWITCH, TACTILE (I/1)
************************************************************
R663 1-216-832-11 METAL CHIP 8.2K 5% 1/10W
R664 1-216-821-11 METAL CHIP 1K 5% 1/10W A-4728-690-A RF BOARD, COMPLETE
R665 1-216-823-11 METAL CHIP 1.5K 5% 1/10W *******************
0 R668 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F
R669 1-216-821-11 METAL CHIP 1K 5% 1/10W < CAPACITOR >
TEL
TEL
R670 1-216-835-11 METAL CHIP 15K 5% 1/10W C001 1-126-206-11 ELECT CHIP 100uF 20% 6.3V
R671 1-216-847-11 METAL CHIP 150K 5% 1/10W C002 1-124-779-00 ELECT CHIP 10uF 20% 16V
R672 1-245-711-31 CARBON 10 5% 1/2W C003 1-126-206-11 ELECT CHIP 100uF 20% 6.3V
13942296513
13942296513
R680 1-249-625-31 CARBON 10 5% 1/2W C011 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25V
(AUS)
QQ
QQ
TEL 13942296513 QQ 376315150 892498299

(AUS) C014 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
376315150 892498299
376315150 892498299
R686 1-249-625-31 CARBON 10 5% 1/2W
R691 1-216-845-11 METAL CHIP 100K 5% 1/10W
R693 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C023 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
R699 1-216-845-11 METAL CHIP 100K 5% 1/10W
< RELAY > C028 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
RY646 1-755-372-11 RELAY C030 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
< TERMINAL >
TM608 1-694-656-21 TERMINAL BOARD (6CH SPEAKER) C033 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
(SPEAKER FRONT/SURR/CENTER) C034 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
************************************************************ C035 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
POWER SW BOARD
**************** C037 1-115-412-11 CERAMIC CHIP 680PF 5% 25V
< LED > C039 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V
www xiaoy u163. com

D920 8-719-058-04 LED SEL5223S-TP15 (STANDBY) C041 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
< TRANSISTOR > C042 1-164-218-11 CERAMIC CHIP 180PF 5% 50V
.
Q900 8-729-027-43 TRANSISTOR DTC114EKA-T146 C050 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V

120
HCD-ZX10D
QQ 376315150 892498299
RF SE-130 SENSOR SURROUND
R047 1-216-839-11 METAL CHIP 33K 5% 1/10W
< CONNECTOR >
R091 1-218-913-11 METAL CHIP 560K 0.5% 1/10W
CN001 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P ************************************************************
CN002 1-784-836-21 CONNECTOR, FFC (LIF (NON-ZIF)) 29P
CN003 1-784-861-21 CONNECTOR, FFC (LIF (NON-ZIF)) 9P A-6060-642-A SE-130 BOARD, COMPLETE
**********************
< DIODE >
< CONNECTOR >
D001 8-719-988-61 DIODE 1SS355TE-17
D002 8-719-988-61 DIODE 1SS355TE-17 CN101 1-750-243-11 SOCKET, CONNECTOR 6P
CN102 1-573-383-11 PIN, CONNECTOR (PC BOARD) 2P
< IC >
< PHOTO SENSOR/IC >
IC001 6-703-922-01 IC SP3723CAF0PM
TEL
TEL
IC003 6-703-921-01 IC TL343IDBVR PH101 8-749-017-45 SENSOR, PHOTO RPR-220C1N
PH102 6-600-072-01 IC RPI-392
< COIL > ************************************************************
13942296513
13942296513
L001 1-412-031-11 INDUCTOR 47uH SENSOR BOARD
L002 1-412-031-11 INDUCTOR 47uH **************
< TRANSISTOR > < CONNECTOR >
Q001 8-729-903-46 TRANSISTOR 2SB1132-P CN605 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P
Q002 8-729-903-46 TRANSISTOR 2SB1132-P
< THERMISTOR >
< RESISTOR >
TH630 1-807-796-11 THERMISTOR
QQ
QQ
R001 1-218-668-11 METAL CHIP 100 0.5% 1/10W ************************************************************
TEL 13942296513 QQ 376315150 892498299

R003 1-216-803-11 METAL CHIP 33 5% 1/10W
R004 1-216-803-11 METAL CHIP 33 5% 1/10W A-4752-634-A SURROUND BOARD, COMPLETE (E15, SP, MY)
376315150 892498299
376315150 892498299
R005 1-216-841-11 METAL CHIP 47K 5% 1/10W A-4753-341-A SURROUND BOARD, COMPLETE (AUS)
R006 1-216-817-11 METAL CHIP 470 5% 1/10W **************************
R007 1-216-803-11 METAL CHIP 33 5% 1/10W < CAPACITOR >

R008 1-216-803-11 METAL CHIP 33 5% 1/10W
R009 1-216-841-11 METAL CHIP 47K 5% 1/10W C700 1-126-963-11 ELECT 4.7uF 20% 50V
R013 1-216-864-11 SHORT CHIP 0
R014 1-216-864-11 SHORT CHIP 0 C730 1-136-495-11 FILM 0.068uF 5% 50V
R016 1-216-864-11 SHORT CHIP 0 C740 1-126-963-11 ELECT 4.7uF 20% 50V
R017 1-216-864-11 SHORT CHIP 0 (AUS)
R019 1-216-864-11 SHORT CHIP 0 (E15, SP, MY)
R020 1-216-864-11 SHORT CHIP 0
R025 1-216-809-11 METAL CHIP 100 5% 1/10W
R026 1-218-718-11 METAL CHIP 12K 0.5% 1/10W C753 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C770 1-136-495-11 FILM 0.068uF 5% 50V
www xiaoy u163. com

R031 1-216-809-11 METAL CHIP 100 5% 1/10W
.
121
HCD-ZX10D
QQ 376315150 892498299
SURROUND TC-A
< DIODE > 0 R730 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F
R731 1-216-821-11 METAL CHIP 1K 5% 1/10W
D761 8-719-404-50 DIODE MA111-TX
D762 8-719-988-61 DIODE 1SS355TE-17 R735 1-245-711-31 CARBON 10 5% 1/2W
R736 1-216-843-11 METAL CHIP 68K 5% 1/10W
D770 8-719-988-61 DIODE 1SS355TE-17 R737 1-216-845-11 METAL CHIP 100K 5% 1/10W
D790 8-719-083-66 DIODE UDZSTE-1718B R741 1-216-841-11 METAL CHIP 47K 5% 1/10W
D791 8-719-083-66 DIODE UDZSTE-1718B (E15, SP, MY)
< EARTH TERMINAL > R741 1-216-842-11 METAL CHIP 56K 5% 1/10W
(AUS)
EP790 1-537-738-21 TERMINAL, GROUND R742 1-216-813-11 METAL CHIP 220 5% 1/10W
R750 1-216-821-11 METAL CHIP 1K 5% 1/10W
TEL
TEL
< IC > R751 1-216-841-11 METAL CHIP 47K 5% 1/10W
(E15, SP, MY)
IC701 6-600-339-01 IC STK413-430 R751 1-216-842-11 METAL CHIP 56K 5% 1/10W
(AUS)
13942296513
13942296513
< TRANSISTOR >
Q720 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R R752 1-216-813-11 METAL CHIP 220 5% 1/10W
Q721 8-729-821-00 TRANSISTOR 2SA1207 0 R764 1-215-863-11 METAL OXIDE 100 5% 1W F
Q722 8-729-924-99 TRANSISTOR 2SC3722K-E 0 R765 1-215-863-11 METAL OXIDE 100 5% 1W F
Q730 8-729-924-99 TRANSISTOR 2SC3722K-E R766 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q763 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R 0 R770 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F

Q764 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R R771 1-216-821-11 METAL CHIP 1K 5% 1/10W
QQ
QQ
Q765 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R R772 1-216-835-11 METAL CHIP 15K 5% 1/10W
TEL 13942296513 QQ 376315150 892498299

Q770 8-729-924-99 TRANSISTOR 2SC3722K-E R773 1-216-847-11 METAL CHIP 150K 5% 1/10W
Q780 8-729-924-99 TRANSISTOR 2SC3722K-E R774 1-216-841-11 METAL CHIP 47K 5% 1/10W
376315150 892498299
376315150 892498299
< RESISTOR > R775 1-249-625-31 CARBON 10 5% 1/2W
0 R780 1-234-499-21 ENCAPSULATED COMPONENT 0.22 5W F
(E15, SP, MY) R783 1-216-847-11 METAL CHIP 150K 5% 1/10W
R701 1-216-842-11 METAL CHIP 56K 5% 1/10W
(AUS) R784 1-216-843-11 METAL CHIP 68K 5% 1/10W
R702 1-216-813-11 METAL CHIP 220 5% 1/10W R785 1-245-711-31 CARBON 10 5% 1/2W
(E15, SP, MY) R790 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R792 1-216-845-11 METAL CHIP 100K 5% 1/10W
R710 1-216-842-11 METAL CHIP 56K 5% 1/10W
(AUS) 0 R793 1-217-637-00 FUSIBLE 1 5% 1/4W F
R711 1-216-841-11 METAL CHIP 47K 5% 1/10W 0 R794 1-245-605-51 FUSIBLE 100 5% 1/4W F
(E15, SP, MY) 0 R795 1-245-605-51 FUSIBLE 100 5% 1/4W F
R711 1-216-842-11 METAL CHIP 56K 5% 1/10W 0 R796 1-215-869-11 METAL OXIDE 1K 5% 1W F
(AUS) 0 R797 1-215-869-11 METAL OXIDE 1K 5% 1W F
R712 1-216-841-11 METAL CHIP 47K 5% 1/10W
(E15, SP, MY) R798 1-216-845-11 METAL CHIP 100K 5% 1/10W
(AUS)
< RELAY >
R720 1-216-833-11 METAL CHIP 10K 5% 1/10W
R721 1-216-833-11 METAL CHIP 10K 5% 1/10W RY760 1-755-372-11 RELAY
R722 1-216-841-11 METAL CHIP 47K 5% 1/10W RY761 1-755-372-11 RELAY
R723 1-216-825-11 METAL CHIP 2.2K 5% 1/10W ************************************************************
R724 1-216-845-11 METAL CHIP 100K 5% 1/10W
TC-A BOARD
www xiaoy u163. com

R725 1-216-843-11 METAL CHIP 68K 5% 1/10W ***********
R726 1-216-843-11 METAL CHIP 68K 5% 1/10W
R727 1-216-839-11 METAL CHIP 33K 5% 1/10W < CONNECTOR >
R728 1-216-841-11 METAL CHIP 47K 5% 1/10W
.
R729 1-216-845-11 METAL CHIP 100K 5% 1/10W CN914 1-785-329-11 PIN, CONNECTOR (LIGHT ANGLE) 3P
CN915 1-785-333-11 PIN, CONNECTOR (LIGHT ANGLE) 7P

122
HCD-ZX10D
QQ 376315150 892498299
TC-A TC-B TRANS VIDEO
< LED > R851 1-216-817-11 METAL CHIP 470 5% 1/10W
D918 8-719-058-03 LED SEL5423E-TP15 (h) R852 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
D919 8-719-058-03 LED SEL5423E-TP15 (H) R855 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R857 1-216-817-11 METAL CHIP 470 5% 1/10W
< SHORT > R858 1-216-821-11 METAL CHIP 1K 5% 1/10W
R859 1-216-817-11 METAL CHIP 470 5% 1/10W
JR903 1-216-864-11 SHORT CHIP 0
R860 1-216-809-11 METAL CHIP 100 5% 1/10W
< TRANSISTOR > R861 1-216-819-11 METAL CHIP 680 5% 1/10W
R862 1-216-817-11 METAL CHIP 470 5% 1/10W
Q907 8-729-027-43 TRANSISTOR DTC114EKA-T146 R864 1-216-817-11 METAL CHIP 470 5% 1/10W
R868 1-216-835-11 METAL CHIP 15K 5% 1/10W
< RESISTOR >
R869 1-216-833-11 METAL CHIP 10K 5% 1/10W
R833 1-216-817-11 METAL CHIP 470 5% 1/10W R870 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
R835 1-216-817-11 METAL CHIP 470 5% 1/10W
TEL
TEL
R836 1-216-817-11 METAL CHIP 470 5% 1/10W < SWITCH >
R837 1-216-833-11 METAL CHIP 10K 5% 1/10W
R840 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W S940 1-771-410-21 SWITCH, TACTILE (REC PAUSE/START)
S941 1-771-410-21 SWITCH, TACTILE (GAME)
13942296513
13942296513
R842 1-216-809-11 METAL CHIP 100 5% 1/10W S942 1-771-410-21 SWITCH, TACTILE (GAME MIXING)
R843 1-216-829-11 METAL CHIP 4.7K 5% 1/10W S943 1-771-410-21 SWITCH, TACTILE (CD SYNC)
R844 1-216-827-11 METAL CHIP 3.3K 5% 1/10W S944 1-771-410-21 SWITCH, TACTILE (M >)
R845 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R846 1-216-823-11 METAL CHIP 1.5K 5% 1/10W S945 1-771-410-21 SWITCH, TACTILE (. m)
S947 1-771-410-21 SWITCH, TACTILE (x)
< SWITCH > S948 1-771-410-21 SWITCH, TACTILE (h)
S949 1-771-410-21 SWITCH, TACTILE (H)
S931 1-771-410-21 SWITCH, TACTILE (. m) ************************************************************
S932 1-771-410-21 SWITCH, TACTILE (M >)
QQ
QQ
S933 1-771-410-21 SWITCH, TACTILE (DIRECTION) 1-861-385-11 TRANS BOARD
TEL 13942296513 QQ 376315150 892498299

S934 1-771-410-21 SWITCH, TACTILE (x) ************
S935 1-771-410-21 SWITCH, TACTILE (h)
376315150 892498299
376315150 892498299
1-533-217-41 HOLDER, FUSE
S936 1-771-410-21 SWITCH, TACTILE (H)
************************************************************ < CAPACITOR >
A-4751-063-A TC-B BOARD, COMPLETE C1192 1-128-576-11 ELECT 100uF 20% 63V
********************
< CONNECTOR >
< CONNECTOR >
* CN1112 1-564-521-11 PLUG, CONNECTOR 6P
CN905 1-785-331-11 PIN, CONNECTOR (LIGHT ANGLE) 5P * CN1113 1-564-522-11 PLUG, CONNECTOR 7P
CN916 1-785-335-11 PIN, CONNECTOR (LIGHT ANGLE) 9P
< DIODE >
< LED >
D1192 6-500-522-21 DIODE 10EDB40-TB3
D921 8-719-058-03 LED SEL5423E-TP15 (GAME)
D922 8-719-058-04 LED SEL5223S-TP15 (REC PAUSE/START) < RESISTOR >
D923 8-719-058-03 LED SEL5423E-TP15 (h)
D924 8-719-058-03 LED SEL5423E-TP15 (H) 0 R1192 1-219-124-11 FUSIBLE 0.68 5% 1/4W F
************************************************************
< SHORT >
A-1066-611-A VIDEO BOARD, COMPLETE
JR907 1-216-864-11 SHORT CHIP 0 **********************
JR908 1-216-864-11 SHORT CHIP 0
< CAPACITOR >
< TRANSISTOR >
Q909 8-729-027-43 TRANSISTOR DTC114EKA-T146 C1201 1-126-964-11 ELECT 10uF 20% 50V
Q910 8-729-027-43 TRANSISTOR DTC114EKA-T146 C1202 1-126-964-11 ELECT 10uF 20% 50V
www xiaoy u163. com

< RESISTOR > C1204 1-104-665-11 ELECT 100uF 20% 25V
R848 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C1206 1-126-960-11 ELECT 1uF 20% 50V
.

123
HCD-ZX10D
QQ 376315150 892498299
VIDEO VOL
C1209 1-126-960-11 ELECT 1uF 20% 50V < RESISTOR >
C1212 1-164-156-11 CERAMIC CHIP 0.1uF 25V R1202 1-218-285-11 METAL CHIP 75 5% 1/10W
C1213 1-126-916-11 ELECT 1000uF 20% 6.3V R1203 1-218-285-11 METAL CHIP 75 5% 1/10W
C1217 1-126-916-11 ELECT 1000uF 20% 6.3V R1207 1-216-833-11 METAL CHIP 10K 5% 1/10W
C1219 1-162-919-11 CERAMIC CHIP 22PF 5% 50V R1210 1-216-809-11 METAL CHIP 100 5% 1/10W
C1221 1-162-919-11 CERAMIC CHIP 22PF 5% 50V R1231 1-216-857-11 METAL CHIP 1M 5% 1/10W
C1222 1-162-919-11 CERAMIC CHIP 22PF 5% 50V R1232 1-216-807-11 METAL CHIP 68 5% 1/10W
TEL
TEL
C1224 1-162-919-11 CERAMIC CHIP 22PF 5% 50V ************************************************************
C1225 1-164-156-11 CERAMIC CHIP 0.1uF 25V A-4752-627-A VOL BOARD, COMPLETE
13942296513
13942296513
C1226 1-126-965-11 ELECT 22uF 20% 50V ********************
C1228 1-216-864-11 SHORT CHIP 0
C1230 1-216-864-11 SHORT CHIP 0 < CAPACITOR >
C1231 1-126-916-11 ELECT 1000uF 20% 6.3V
< CONNECTOR > C968 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
CN1200 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P C971 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
CN1201 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P
CN1202 1-779-554-21 CONNECTOR, FFC (LIF (NON-ZIF)) 17P < CONNECTOR >
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
< SHORT/FERRITE BEAD > CN928 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P
376315150 892498299
376315150 892498299
FB1200 1-216-864-11 SHORT CHIP 0 < LED >
FB1201 1-216-864-11 SHORT CHIP 0
FB1202 1-216-864-11 SHORT CHIP 0 D907 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 1)
D910 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 4)
FB1206 1-500-284-21 INDUCTOR, FERRITE BEAD
< IC > D913 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 7)
IC1200 8-759-295-90 IC NJM2244M-TE2 D915 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 9)
IC1201 6-705-602-01 IC MM1623BFBE D916 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 10)
< JACK/TERMINAL > D917 8-719-075-60 LED SELS5823C-TP15 (VOLUME LEVEL 11)
J1200 1-793-483-11 PHONO JACK 3P (COMPONENT VIDEO) < SHORT >

J1201 1-774-227-11 JACK, PIN 1P (VIDEO OUT)
J1202 1-537-943-11 TERMINAL, S (S VIDEO OUT) JR909 1-216-864-11 SHORT CHIP 0
JR910 1-216-864-11 SHORT CHIP 0
< SHORT/FERRITE BEAD > JR911 1-216-864-11 SHORT CHIP 0
JR912 1-216-864-11 SHORT CHIP 0
JR1202 1-216-864-11 SHORT CHIP 0 JR913 1-216-864-11 SHORT CHIP 0
JR1203 1-216-864-11 SHORT CHIP 0
JR1204 1-216-864-11 SHORT CHIP 0 < TRANSISTOR >
JR1205 1-500-284-21 INDUCTOR, FERRITE BEAD
www xiaoy u163. com

< TRANSISTOR > < RESISTOR >
Q1200 .
8-729-027-43 TRANSISTOR DTC114EKA-T146 R960 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
124
HCD-ZX10D
QQ 376315150 892498299
VOL VOLTAGE SELECTOR
R961 1-216-829-11 METAL CHIP 4.7K 5% 1/10W S975 1-418-725-41 ENCODER, ROTARY (12 TYPE) (VOLUME)
R962 1-216-827-11 METAL CHIP 3.3K 5% 1/10W ************************************************************
R963 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R964 1-216-823-11 METAL CHIP 1.5K 5% 1/10W 1-861-384-11 VOLTAGE SELECTOR BOARD
***********************
R965 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R966 1-216-821-11 METAL CHIP 1K 5% 1/10W < CAPACITOR >
R967 1-216-819-11 METAL CHIP 680 5% 1/10W
R968 1-216-817-11 METAL CHIP 470 5% 1/10W C1001 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R969 1-216-817-11 METAL CHIP 470 5% 1/10W C1002 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R970 1-216-819-11 METAL CHIP 680 5% 1/10W C1006 1-126-916-11 ELECT 1000uF 20% 6.3V
R971 1-216-821-11 METAL CHIP 1K 5% 1/10W
R972 1-216-823-11 METAL CHIP 1.5K 5% 1/10W < CONNECTOR >
R973 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R974 1-216-825-11 METAL CHIP 2.2K 5% 1/10W CN1000 1-785-329-11 PIN, CONNECTOR (LIGHT ANGLE) 3P
* CN1002 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P
TEL
TEL
R975 1-216-827-11 METAL CHIP 3.3K 5% 1/10W * CN1004 1-566-664-11 PIN, CONNECTOR (3.96mm PITCH) 4P
R976 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (E15, SP, MY)
R1300 1-216-821-11 METAL CHIP 1K 5% 1/10W * CN1004 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P (AUS)
R1301 1-216-809-11 METAL CHIP 100 5% 1/10W
13942296513
13942296513
R1302 1-216-821-11 METAL CHIP 1K 5% 1/10W < DIODE >
R1303 1-216-821-11 METAL CHIP 1K 5% 1/10W D1000 8-719-404-50 DIODE MA111-TX

R1306 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1308 1-216-809-11 METAL CHIP 100 5% 1/10W < SHORT >
R1309 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1310 1-216-821-11 METAL CHIP 1K 5% 1/10W JR1002 1-216-864-11 SHORT CHIP 0
R1313 1-216-821-11 METAL CHIP 1K 5% 1/10W < COIL >

R1315 1-216-809-11 METAL CHIP 100 5% 1/10W
QQ
QQ
R1316 1-216-821-11 METAL CHIP 1K 5% 1/10W L1001 1-410-666-31 INDUCTOR 18uH
TEL 13942296513 QQ 376315150 892498299

R1317 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1320 1-216-821-11 METAL CHIP 1K 5% 1/10W < TRANSISTOR >
376315150 892498299
376315150 892498299
R1322 1-216-809-11 METAL CHIP 100 5% 1/10W Q1000 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R
R1323 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1324 1-216-821-11 METAL CHIP 1K 5% 1/10W < RESISTOR >
R1327 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1001 1-216-845-11 METAL CHIP 100K 5% 1/10W
R1330 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1331 1-216-821-11 METAL CHIP 1K 5% 1/10W < RELAY >
R1335 1-216-821-11 METAL CHIP 1K 5% 1/10W
R1336 1-216-821-11 METAL CHIP 1K 5% 1/10W 0 RY1000 1-755-299-11 RELAY
R1337 1-216-821-11 METAL CHIP 1K 5% 1/10W
< SWITCH >
< SWITCH/ROTARY ENCODER >
0 S1000 1-771-291-31 SWITCH, POWER (E15, SP, MY)
S904 1-771-410-21 SWITCH, TACTILE (SALSA) (VOLTAGE SELECTOR)
S905 1-771-410-21 SWITCH, TACTILE (REGGAE) ************************************************************
S906 1-771-410-21 SWITCH, TACTILE (POP)
S907 1-771-410-21 SWITCH, TACTILE (SAMBA)
S908 1-771-410-21 SWITCH, TACTILE (TANGO)
S909 1-771-410-21 SWITCH, TACTILE (SOUND FIELD)

S910 1-771-410-21 SWITCH, TACTILE (P FILE)
S911 1-771-410-21 SWITCH, TACTILE (X-GROOVE)
S912 1-771-410-21 SWITCH, TACTILE (EFFECT ON/OFF)
S913 1-771-410-21 SWITCH, TACTILE (ROCK)
S914 1-771-410-21 SWITCH, TACTILE (JAZZ)

S915 1-771-410-21 SWITCH, TACTILE (DANCE)
www xiaoy u163. com

S916 1-771-410-21 SWITCH, TACTILE (MOVIE)
S917 1-771-410-21 SWITCH, TACTILE (GAME)
S918 1-771-410-21 SWITCH, TACTILE (DVD TOP MENU)
.
S919 1-771-410-21 SWITCH, TACTILE (DVD MENU)
S920 1-771-410-21 SWITCH, TACTILE (AMP MENU)

125
HCD-ZX10D
QQ 376315150 892498299
Ref. No.
5
Part No.
1-769-992-11
Description
MISCELLANEOUS
**************
WIRE (FLAT TYPE) (13 CORE)

Remark
6 1-796-487-51 DECK, MECHANICAL (CWM43RR35)

57 1-773-163-11 WIRE (FLAT TYPE) (21 CORE)
202 1-693-603-31 TUNER (FM/AM)
203 1-769-939-11 WIRE (FLAT TYPE) (11 CORE)
207 1-468-737-21 POWER, SWITCHING

301 1-500-497-11 FILTER, CLAMP (FERRITE CORE)
0 303 1-777-071-53 CORD, POWER (SP, MY)
0 303 1-829-627-11 CORD, POWER (E15)
0 303 1-827-295-22 CORD, POWER (AUS)
407 1-823-921-11 FMS-18 (6Pin)

0 505 A-1067-676-A OPTICAL TRAVERSE UNIT (DBU-3)
TEL
TEL
506 1-824-106-12 CABLE, FLEXIBLE FLAT (24 CORE)
13942296513
13942296513
M001 X-3952-411-1 MOTOR ASSY, LOADING
M501 1-787-099-21 FAN, DC

S002 1-418-746-11 ENCODER, ROTARY
(CHUKING DETECT, TRAY OPEN/CLOSE DETECT)
0 T1100 1-443-270-11 POWER TRANSFORMER
QQ
QQ
****************************************************************
TEL 13942296513 ACCESORRIESE

QQ 376315150 892498299
376315150 892498299
376315150 892498299
*************
0 1-569-007-11 ADAPTOR, CONVERSION 2P (E15)

0 1-569-008-21 ADAPTOR, CONVERSION 2P (SP, MY)


126
HCD-ZX10D
QQ 376315150 892498299
MEMO
TEL
TEL
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

127
HCD-ZX10D
QQ 376315150 892498299
REVISION HISTORY
Clicking the version allows you to jump to the revised page.

Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
Ver. Date Description of Revision

1.0 2004.07 New
TEL
TEL
13942296513
13942296513
QQ
QQ
TEL 13942296513 QQ 376315150 892498299
376315150 892498299
376315150 892498299

2

HCDZX 10 D

Uploaded by

Copyright:

Available Formats

HCDZX 10 D

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HCDZX 10 D

Uploaded by

Copyright:

Available Formats

http://www.xiaoyu163.

This system incorporates Dolby* Digital, Dolby Pro

www x aoy u163. com

FM stereo, FM/AM superheterodyne tuner Flexible Circuit Board Repairing

Power consumption 370 watts

TEL 13942296513 QQ 376315150 892498299

Design and specifications are subject to change

www xiaoy u163. com

Note on playback operations

www xiaoy u163. com

7-23. PRINTED WIRING BOARD

TEL 13942296513 QQ 376315150 892498299

xiaoy u163. com

: LEAD FREE MARK

TEL 13942296513 QQ 376315150 892498299

RELEASING THE DISC TRAY LOCK

Note: When “LOCKED” is displayed, the tray lock is not released by

www . xiaoy u163. com

2 Pull-out the disc tray.

xiaoy u163. com

TEL 13942296513 QQ 376315150 892498299

www xiaoy u163. com

CLOCK/TIMER SET e; SLEEP qh V/v/B/b wj The minute indication flashes in the

www . xiaoy u163. com

3-1. FLOW CHART

3-2. COVER (TOP)

3-5. FRONT PANEL SECTION

3-6. BACK PANEL SECTION 3-12. TAPE MECHANISM DECK

3-8. BRACKET (TR) BLOCK

3-9. DVD MECHANISM DECK 3-10. OPTICAL TRAVERSE UNIT

www . xiaoy u163. com

3-2. COVER (TOP)

www . xiaoy u163. com 1 three screws

2 Pull-out the tray in the direction

2 connector 4 lead wire

xiaoy u163. com

1 wire (flat type) 9 3 four screws

qa back panel section

1 wire (flat type)

xiaoy u163. com

5 three screws 7 bracket (TR) block

1 wire (flat type)

5 DVD mechanism deck

www xiaoy u163. com

3 three step screws (M)

3 flexible flat cable

4 wire (flat type)

xiaoy u163. com

3 tape mechanism deck

www . xiaoy u163. com

TEL 13942296513 QQ 376315150 892498299

xiaoy u163. com

DVD SHIP MODE (WITH MEMORY CLEAR) VIDEO/SAT SWITCHING

www . xiaoy u163. com

DVD TEST MODE GENERAL DESCRIPTION

Test Mode Menu 0-1. All (All items continuous check)

Press NEXT Key to Continue

xiaoy u163. com

## Drive Auto Adjustment ##