SFP 1g Bx10u 1310nm 1490nm 10km Bidi Fiber Transceiver 151108 T03

SFP-1G-BX10U-31/49-T03#151108
1.25Gbps TX1310nm/RX1490nm 10KM SFP Transceiver
1.25Gbps TX1310nm/RX1490nm 10KM

Product
SFP Bi-Directional Transceiver
Model SFP-1G-BX10U-31/49-T03
File No. SFP-1G-BX10U-31/49-T03#151108
Version 1.0
Issuing Date 2022-09-01
Specification Revision Record

Date Version Page Revision Description Prepare Approve
20220901 1.0 CTL
All right reserved by Guilin GLsun Science and Tech Group Co., LTD. Without written permission,
any unit or individual can’t reproduce, copy or use it for any commercial purpose.
Guilin GLsun Science and Tech Group Co., LTD.

-1-
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
SFP-1G-BX10U-31/49-T03#151108
Product Description
Glsun SFP-1G-BX10U-31/49, SFP-BIDI transceivers are high performance, cost effective modules
supporting dual data-rate of 1.25Gbps/1.0625Gbps and 10KM transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a
trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety
requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further
information, please refer to SFP MSA.
Product Feature
 Dual data-rate of 1.25Gbps/1.063Gbps operation
 1310nm FP laser and PIN photodetector for 10KM transmission
 Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
 Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
 Compatible with SONET OC-24-LR-1
 Compatible with RoHS
 +3.3V single power supply
 Operating case temperature range:
0 °C to +70 °C (Commercial)
-40 °C to +85 °C (Industrial)
Applications
 Gigabit Ethernet
 Fiber Channel
 Switch to Switch interface
 Switched backplane applications
 Router/Server interface
 Other optical transmission systems
Absolute Maximum Ratings
Parameter Symbol Min Typ Max Unit Ref.

Maximum Supply Voltage Vcc -0.5 4.7 V
Storage Temperature TS -40 85 °C
Case Operating Temperature TOP 0 70 °C

-2-
SFP-1G-BX10U-31/49-T03#151108
Optical Characteristics
Parameter Symbol Min Typ Max Unit Note

Transmitter
Operating Wavelength λC 1260 1310 1360 nm
Ave. output power (Enabled) Po -9 -3 dBm 1
Extinction Ratio ER 10 dB 1
RMS spectral width Δλ 4 nm
Rise/Fall time (20%~80%) Tr/Tf 0.26 ps 2
Output Eye Mask Telcordia GR-253-CORE and ITU-T G.957 compatible
Receiver
Operating Wavelength 1470 1510 nm
Sensitivity Psen -22 dBm 1
Min. overload Pimax -3 dBm
LOS Assert Pa -36 dBm
LOS De-assert Pd -24 dBm 2
LOS Hysteresis Pd-Pa 0.5 6 dB
Notes:
1. Measure at 2^23-1 NRZ PRBS pattern
2. Transmitter eye mask definition
3. Measured with Light source 1310nm (1490nm), ER=10dB; BER =<10^-12 @PRBS=2^23-1 NRZ.
4. When LOS de-asserted, the RX data+/- output is signal output.
Pin Functions
Pin Name Function Notes
1 VeeT Tx ground
2 Tx Fault Tx fault indication, Open Collector Output, active “H” 1
3 Tx Disable LVTTL Input, internal pull-up, Tx disabled on “H” 2
4 MOD-DEF2 2 wire serial interface data input/output (SDA) 3
5 MOD-DEF1 2 wire serial interface clock input (SCL) 3
6 MOD-DEF0 Model present indication 3
7 Rate select No connection
8 LOS Rx loss of signal, Open Collector Output, active “H” 4
9 VeeR Rx ground
10 VeeR Rx ground
11 VeeR Rx ground
12 RD- Inverse received data out 5
13 RD+ Received data out 5
14 VeeR Rx ground
15 VccR Rx power supply
16 VccT Tx power supply
17 VeeT Tx ground

-3-
SFP-1G-BX10U-31/49-T03#151108
18 TD+ Transmit data in 6

19 TD- Inverse transmit data in 6
20 VeeT Tx ground
Notes:
1. When high, this output indicates a laser fault of some kind. Low indicates normal operation. And
should be pulled up with a 4.7 – 10KΩ resistor on the host board.
2. TX disable is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7 – 10KΩ resistor. Its states are:
Low (0 – 0.8V): Transmitter on (>0.8, < 2.0V): Undefined
High (2.0V~Vcc+0.3V): Transmitter Disabled Open: Transmitter Disabled
3. Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7K – 10KΩ
resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 has been grounded by the module to indicate that the module is present
Mod-Def 1 is the clock line of two wire serial interface for serial ID
Mod-Def 2 is the data line of two wire serial interface for serial ID
4. When high, this output indicates loss of signal (LOS). Low indicates normal operation.
5. RD+/-: These are the differential receiver outputs. They are AC coupled 100Ω differential lines which
should be terminated with 100Ω (differential) at the user SERDES. The AC coupling is done inside the
module and is thus not required on the host board.
6. TD+/-: These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω
differential termination inside the module. The AC coupling is done inside the module and is thus not
required on the host board.
Electrical Characteristics
Parameter Symbol Min Typ Max Unit Ref.

Supply Voltage Vcc 3.15 3.3 3.6 V
Supply Current Icc 185 280 mA
Transmitter
Input differential impedance Rin 100 Ω 1
Single ended data input swing Vin,pp 250 1200 mV
Transmit Disable Voltage VD Vcc–1.3 Vcc V
Transmit Enable Voltage VEN Vee Vee+ 0.8 V 2
Transmit Disable Assert Time 10 us
Receiver
Single ended data output swing Vout,pp 250 800 mV 3
Data output rise time tr 100 175 ps 4

Data output fall time tf 100 175 ps 4
LOS Fault VLOS fault Vcc–0.5 VccHOS V 5
T
LOS Normal VLOS Vee Vee+0.5 V 5
norm
-4-
SFP-1G-BX10U-31/49-T03#151108
Power Supply Rejection PSR 100 mVpp 6
Notes:
1. Connected directly to TX data input pins. AC coupled thereafter.
2. Or open circuit.
3. Into 100 ohms differential termination.
4. 20 – 80 %
5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to
specified value applied through the recommended power supply filtering network.
Electrical Input / Output Characteristics
Parameter Symbol Min Typ Max Unit Note

Transmitter
Transmitter 1
Diff. input voltage swing 120 820 mVpp
Tx Disable input H VIH 2.0 Vcc+0. V
3
L VIL 0 0.8 2
Tx Fault output H VOH 2.0 Vcc+0. V
3
L VOL 0 0.8
Input Diff. Impedance Zin 100 Ω
Receiver 3
Diff. output voltage swing 340 650 800 mVpp 2
Rx LOS Output H VOH 2.0 Vcc+0. V
3
Notes:
1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.
2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ
resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.
3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user
SERDES
Regulatory Compliance
Feature Reference Performance
Electrostatic discharge（ESD） IEC/EN 61000-4-2 Compatible with standards
Electromagnetic Interference FCC Part 15 Class B EN 55022 Compatible with standards
(EMI) Class B (CISPR 22A)
Laser Eye Safety FDA 21CFR 1040.10, 1040.11 Class 1 laser product
IEC/EN 60825-1, 2
Component Recognition IEC/EN 60950, UL Compatible with standards
ROHS 2002/95/EC Compatible with standards
EMC EN61000-3 Compatible with standards

-5-
SFP-1G-BX10U-31/49-T03#151108
Module Block Diagram
Pin Definitions

-6-
SFP-1G-BX10U-31/49-T03#151108
Package Dimensions
Ordering Information
Part Number Product Description

SFP-1G-BX10U-31/49-T03-C 1.25G SFP BIDI Tx1550nm/Rx1310nm 10KM 3.3V LC 0~70℃ SMF DDM
SFP-1G-BX10U-31/49-T03-I 1.25G SFP BIDI Tx1550nm/Rx1310nm 10KM 3.3V LC -40~85℃ SMF DDM

-7-

SFP 1g Bx10u 1310nm 1490nm 10km Bidi Fiber Transceiver 151108 T03

Uploaded by

Copyright:

Available Formats

SFP 1g Bx10u 1310nm 1490nm 10km Bidi Fiber Transceiver 151108 T03

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SFP 1g Bx10u 1310nm 1490nm 10km Bidi Fiber Transceiver 151108 T03

Uploaded by

Copyright:

Available Formats

SFP-1G-BX10U-31/49-T03#151108

1.25Gbps TX1310nm/RX1490nm 10KM SFP Transceiver

1.25Gbps TX1310nm/RX1490nm 10KM

File No. SFP-1G-BX10U-31/49-T03#151108

Issuing Date 2022-09-01

Specification Revision Record

20220901 1.0 CTL

Guilin GLsun Science and Tech Group Co., LTD.

Absolute Maximum Ratings

Parameter Symbol Min Typ Max Unit Ref.

Guilin GLsun Science and Tech Group Co., LTD.

Parameter Symbol Min Typ Max Unit Note

Guilin GLsun Science and Tech Group Co., LTD.

18 TD+ Transmit data in 6

Parameter Symbol Min Typ Max Unit Ref.

Data output rise time tr 100 175 ps 4

Electrical Input / Output Characteristics

Parameter Symbol Min Typ Max Unit Note

Guilin GLsun Science and Tech Group Co., LTD.

Module Block Diagram

Guilin GLsun Science and Tech Group Co., LTD.

Part Number Product Description

Guilin GLsun Science and Tech Group Co., LTD.

You might also like