FLOW BETTER WITH US

IS: 15778

*UNIT OF MEASUREMENT FOR PIPES AND FITTINGS IS PER

UNIT
PIPE (SDR 13.5) UNIT IS 3 MTR
PIPE (SDR 11) UNIT IS 3 MTR
ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
ITEM CODE SIZE SIZE PACKING RATE PER UNIT
MM INCH
1 15 1/2 50 193.54
7 15 1/2 50 223.34
2 20 3/4 50 325.05
8 20 3/4 50 354.58
3 25 1 25 502.32
9 25 1 25 590.96
4 32 1 1/4 15 743.03 10 32 1 1/4 15 903.18
5 40 1 1/2 10 1053.80 11 40 1 1/2 10 1264.48
6 50 2 10 1776.32 12 50 2 10 2107.48

PIPE (SDR 17) UNIT IS 3 MTR

ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT

111111 11 65 3392.59

COUPLER TEE

ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
1 15 1/2 50 X 6 11.88 1 15 1/2 25 x 8 21.01
2 20 3/4 50 X 12 16.0 2 20 3/4 25 x 6 28.27
3 25 1 50 X 6 26.10 3 25 1 20 x 6 49.60
4 32 1 1/4 25 X 4 55.15 4 32 1 1/4 5 x 16 106.23
5 40 1 1/2 10 X 7 93.38 5 40 1 1/2 2 x 10 186.38
6 50 2 2 X 14 207.90 6 50 2 1 x 22 403.15

MALE THREADED ADAPTER PLASTIC - MAPT

ELBOW 45
ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT
MM
ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
1 15 1/2 25 x 12 14.21
1 20 3/4 20 X 12 26.54 2 20 3/4 25 x 8 21.81
2 25 1 10 X 11 45.50 3 25 1 20 x 8 32.24
32 1 1/4 15 X 5 4 32 1 1/4 15 x 10 57.64
40 1 1/2 6X6 5 40 1 1/2 4 x 17 84.03
50 2 2X8 6 50 2 2 x 15 159.66

ELBOW 90 REDUCING MALE THREADED ADAPTER PLASTIC -

MAPT
ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT 254010045 20X15 3/4 X 1/2 25 x 12 29.78
1 15 1/2 25 X 12 16.33 FEMALE THREADED ADAPTER PLASTIC - FAPT
2 20 3/4 50 X 8 19.38 ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
3 25 1 25 X 8 39.67 1 15 1/2 25 x 8 19.83
4 32 1 1/4 15 X 6 85.39 2 20 3/4 25 x 8 28.83
5 40 1 1/2 4 X 18 160.34 3 25 1 20 x 6 44.06
6 50 2 2X8 319.69 4 32 1 1/4 15 X 2 112.04
5 40 1 1/2 4 X 10 152.10
REDUCING ELBOW 90
6 50 2 2X8 223.76
ITEM CODE SIZE SIZE PACKING RATE PER UNIT
MM INCH PLAIN END CAP

1 25 X 20 1 X 3/4 30 X 5 67.41
ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT
MM
2 32 X 20 1 1/4 X 15 X 6 120.12
 3/4 1 15 1/2 25 x 24 7.83
3 32 X 25 1 1/4 X 1 15 X 5
2 20 3/4 30 x 10 13.03

THREADED END PLUG 3 25 1 25 x 8 20.79

4 32 1 1/4 25 x 6 44.24
ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT 5 40 1 1/2 10 x 10 67.14
MM
254010148 15 1/2 100 10.51 6 50 2 2 x 25 139.56
BALL VALVE
ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT SPINDLE FOR CONCEALED STOP COCK
ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT
1 20 3/4 45 MM
254010358 20 3/4 1 450.00
2 25 1 30
3 32 1 1/4 19 BYPASS BEND
4 40 1 1/2 10 ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
5 50 2 8 254010162 20 3/4 5X6 96.77
254010163 25 1 5X6 231.39
UNION
ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT CROSS TEE
ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT
1 15 1/2 20 x 12 56.66 MM
2 254010116 20 3/4 25 x 8 59.19
2 20 3/4 20 x 10 81.4
2 3 25 1 10 x 5 112.50 MALE THREADED ADAPTER BRASS - MABT
4 32 1 1/4 8 x 10 174.16
2 ITEM CODE SIZE SIZE INCH PACKING RATE PER UNIT
5 40 1 1/2 2 x 10 292..44 MM
1 15 1/2 10 X 20
6 50 2 1 x 10 537.00
2 20 3/4 10 X 10 209.65
TANK NIPPLE 3 25 1 4 X 14 327.02
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT 4 32 1 1/4 2 X 20 676.65
INCH
1 20 3/4 150 63.05 5 40 1 1/2 2 X 12
2 25 1 100 89.31 6 50 2 1 X 12
3 32 1 1/4 60 148.34
REDUCING MALE THREADED ADAPTER BRASS -
4 40 1 1/2 50 218.68 MABT
5 50 2 30 353.80 ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
20 X 15 3/4 X 1/2 10 X 10 135.49
TANK NIPPLE - PLAIN END 25 X 15 1 X 1/2 10 X 10 209.85
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT 25X20 1 X 3/4 10 X 10
INCH
1 20 3/4 150 63.05 FEMALE THREADED ADAPTER BRASS - FABT
2 25 1 100 89.31
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT
3 32 1 1/4 60 148.34 INCH

4 40 1 1/2 50 218.68
1 20 3/4 10 X 10 210.81
5 50 2 - 353.80
2 25 1 4 X 12 344.99
SHORT BEND (SDR-11) 3 32 1 1/4 2 X 20 772.42
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT 40 1 1/2 2 X 12
INCH
20 3/4 400 50 2 1 X 12
25 1 200 REDUCING FEMALE THREADED ADAPTER BRASS -
32 1 1/4 100 FABT

40 1 1/2 100 ITEM CODE SIZE MMSIZE PACKING RATE PER UNIT
INCH
20 X 15 3/4 X 1/2 10 X 12
50 2 50
25 X 15 1 X 1/2 4 X 25
METAL CLAMP 25 X 20 1 X 3/4 4 X 25
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT SIZE MM SIZE INC RATE PER UNIT
INCH R ELBOW
15 1/2 100 ITEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
20 3/4 100 1 15 3/4X1/2 4 X 36 67.69
25 1 100 2 20 1X1/2 4 X 30 134.54
32 1 1/4 50
40 1 1/2 50
50 2 50 R BRASS TEE

PACKING RATE PER UNIT

CONCEALED STOP COCK SIZE
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT TEM CODE SIZE MM SIZE INCH PACKING RATE PER UNIT
I
INCH
3/4X1/2 88.97
254010271 20 3/4 30 1,032.66
1 X1/2 151.36
254010272 25 1 30 1,359.67
 3917400
0

REDUCER BUSH

ITEM CODE SIZE SIZE PACKING RATE PER

MM INCH UNIT REDUCER COUPLER
1 20 X 15 3/4 X 1/2 50 X 10 10.40
2 25 X 15 1 X 1/2 25 X 10 26.12
3 25 X 20 1 X 3/4 25 X 12 20.50
4 32 X 15 11/4 10 X 15 47.40 ITEM CODE SIZE SIZE INCH PACKING RATE PER
X1/2 MM UNIT
5 32 X 20 1 1/4 X 15 X 10 39.76 254010007 20 X 15 3/4X1/2 25 X 8 21.18
3/4
6 32 X 25 1 1/4 X 15 X 10 29.69 254010008 25 X 15 1 X 1/2 25 X 8 31.98
1
7 40 X 15 1 10 X 10 76.93 254010009 25 X 20 1 X 3/4 40 X 6 31.67
1/2x1/2
8 40X20 11/2X3/4 10 X 10 63.05 254010010 32 X 20 1 1/4 X 10 X 18 69.64
3/4
9 40 X 25 1 1/2 X 1 10 X 10 58.00 254010011 32 X 25 1 1/4 X 1 10 X 18 58.68
10 40 X 32 11/2X1 10 X 10 38.66 254010013 40 X 11/2 X 3/4 10 X 7 126.64
1/4 20
11 50 X 15 2 X 1/2 6X8 126.30 254010014 40 X 25 1 1/2 X 1 10 X 7 116.91
12 50X20 2 X3/4 6X8 114.59 254010201 40 X 32 11/2X11/4 10 X 7 114.34
13 50X25 2X1 6X8 118.96 254010016 50 X 25 2X1 4 X 10 208.39
14 50 X 32 2 X 1 1/4 6 X 14 119.36 254010017 50 X 32 2 X 1 1/4 4 X 10 221.68
15 50X40 2 X 1 1/2 6 X 12 106.96
254010018 50 X 2 X 1 1/2 4 X 10 247.66
40

3 IN 1 MIXTURE ADAPTER (TOP AND BOTTOM)

ITEM SIZE SIZE HEIG PACKIN RATE PER
CODE MM INCH HT G UNIT
REDUCING TEE
20 X 15 3/4 X 6” 10
1/2INCH
ITEM CODE SIZE MM SIZE PACKING RATE PER UNIT
20 X 15 3/4 X 7” 10
1 25 X 20 11/2
X 3/4 20 X 6 82.23
2 1 1/4 X 3/4 7X8
TOP) 150.95
32 X 20
3 IN 1 MIXER ADAPTER (ALL
3 SIZE 1 1/4
ITEM 32 X 25 X1
SIZE 135.08
7 X 8 PACKIN
HEIG RATE PER
4 CODE 40 X 25
MM 1 1/2
INCH
X1 2 HT
X 10 G 233.46UNIT
5 40 X20 3/4X11/4
32X 11/2 X 2 6”
X 10 10 219.80
6 50 X15
25 1/2
2X1 1 X 22 418.03
7
20 X 152 3/4
50 X 32
X
X 1 1/4
7”
1 X 22
10 423.42
1/2
8 50X40 2 X 1 1/2 1 X 22 428.59
3 IN 1 MIXER ADAPTER (TOP & SIDE)
ITEM SIZE SIZE HEIG PACKIN RATE PER
CODE MM INCH HT G UNIT
HSN
CPVC SOLVENT
20 XCEMENT
15 3/4 X 6” 10
CODE
1/2 3506100
0
X 15 3/4
20 ML
ITEM CODE SIZE IN X
PACKING 7” 10UNIT
RATE PER
1/2
15
3 IN 1 MIXER 50
ADAPTER (HOT TOP & COLD DOWN)
ITEM 25SIZE SIZE
25 HEIG PACKIN RATE PER
CODE MM INCH HT G UNIT
50 12
20 X 3/4 X 6” 10
15
59 1/224
20 X 15 3/4 X 7” 10
118
1/224
237
3 IN 1 MIXER 12
ADAPTER (HOT SIDE & COLD DOWN)
ITEM 473SIZE SIZE
6 HEIG PACKIN RATE PER
CODE MM INCH HT G UNIT
20 X 15 3/4 X 6” 10
1/2
20 X 15 3/4 X 7” 10
1/2

HSN CODE HSN CODE

DEC CPVC PIPES AND FITTINGS ASTM F-
441
ASTM F-
438
ASTM F-
439 39172990 39174000

PIPE(SCHD - 40) UNIT IS 3 MTR PIPE(SCHD - 40) UNIT IS 5 MTR

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
 65 2 1/2 5 65 2 1/2 5
80 3 3 80 3 3
100 4 2 100 4 2

PIPE(SCHD - 80) UNIT IS 3 MTR PIPE(SCHD - 80) UNIT IS 5 MTR

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 5 65 2 1/2 5
80 3 3 80 3 3
100 4 2 100 4 2

COUPLER (SCHD - 80) PLAIN END CAP (SCHD - 80)

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1 X 12 254010127 65 2 1/2 2X6
80 3 1 X 12 254010128 80 3 1X8
100 4 1X4 254010129 100 4 1 X 10

ELBOW 450 (SCHD - 80) OPEN FLANGE (SCHD - 80)

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1X5 767.60 65 2 1/2 1X5
80 3 1X4 1,108.33 80 3 1X4
100 4 1X2 1,952.98 100 4 1X5

ELBOW 900 (SCHD - 80) BLIND FLANGE (SCHD - 80)

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1X8 922.95 65 2 1/2 1X5
80 3 1X6 1,335.58 80 3 1X4
100 4 1X2 2,274.60 100 4 1X4

EQUAL TEE (SCHD - 80) SHORT BEND (SCHD - 40)

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1X6 65 2 1/2 4
80 3 1X2 80 3 4
100 4 1X2 100 4 4

MALE THREADED ADAPTER PLASTIC - MAPT (SCHD - SHORT BEND (SCHD - 80)
80)
ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1X6 65 2 1/2 4 1,403.97
80 3 1 X 12 80 3 4 2,197.42
100 4 1X6 100 4 4 3,998.02

FEMALETHREADEDADAPTERPLASTIC- FAPT (SCHD- 80) BALL VALVE

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT
65 2 1/2 1 X 15 65 2 1/2 1
80 3 1X6 80 3 1
100 4 1X6 100 4 - -

REDUCERBUSH (SCHD - 80)

ITEM CODE SIZE MMSIZE INCH PACKING RATE PER UNIT

65X50 2 1/2X2 2X9 295.85

80X65 3X 2 1/2 2X6 383.47
100X80 4X3 1X8 795.71
100X65 4X2 1/2 1X8 892.57

IPS TO CTS 65X50 2 1/2X2 2X9 258.40

 DEC CPVC PIPES AND
FITTINGS

NOMINAL SIZE NOMINAL NOMINAL SCHD - 40 WORKING PRESSURE SCHD - 80 WORKING PRESSURE
(MM) BORE (INCH) OUTSIDE THICKNESS AT (KG / CM2) THICKNESS AT (KG / CM2)
DIAMETER (MM) (MM)
(MM)

MINIMUM MAXIMUM 23OC 820C MINIMUM MAXIMUM 23OC 820C

65 2 1/2 73.0 5.16 5.77 20.70 5.20 7.01 7.85 29.00 7.20

80 3 88.9 5.49 6.15 17.90 4.50 7.62 8.53 25.50 6.20

100 4 114.3 6.02 6.73 15.20 3.80 8.56 9.58 22.10 5.50

FEATURES&BENEFITS OF CPVC PIPES AND

FITTINGS
HYGIENIC PIPING SYSTEM HOT AND COLD WATER CHEMICAL ATTACKS
DEC CPVC piping system is manfactured with non toxic,
non organoleptic and non microbial raw material DEC CPVC piping system is compatible with both hot and
compound. Lower bacterial growth, no pit formation, no cold water. Due to additional chlorine content, the pipes
leach formation and no corrosion made the DEC CPVC and fittings with stand high temperature in
pipes and fittings superior to other alternate comparison to any other thermo plastic plumbing systems.
materials and proven as hygienic piping system.
The smooth inner surface prevents scaling.

RESISTANCE TO
CORROSION AND LIGHT WEIGHT, EASY INSTALLATION
CHEMICAL ATTACKS DEC CPVC pipes and fittings and fittings are
DEC CPVC pipes and fittings are resistant to all types light in weight and are very easy to install in
of natural corrosion environments and are inert to comparison with any other piping systems.
major chemical products (please verify the chemical
resistance chart).

TOUGH AND RIGIDITY

LOW THERMAL EXPANSION
DEC CPVC pipes and fittings are made
DEC CPVC pipes have low
up of tough and rigid material and has a
thermal expansion.
good impact strength.

SUPERIOR INSULATION SELF EXTINGUISHING

The heat loss in CPVC piping system is lower DEC CPVC pipes and fittings are self
than the metal piping system, thus result in lesser extingushing and they do not promote fire
insulation material for hot water piping system. when the source is removed.
 INSTALLATION PRECAUTIONS

When using a transition Hang or strap CPVC piping When connected to gas water heater, CPVC tubing
connection to metal threads, use systems loosely to allow for should not be located within 50 cm of the flue. For
a special transition fitting to CPVC thermal expansion. Do not water heaters lacking reliable temperature control,
male or female threaded adapter use metal straps with sharp
this distance may be increased up to 1mtr. A metal
whenever possible. Do not over- edges that might damage
nipple or flexible appliance connector should be
torque plastic threaded the tubing.
connections. Hand tight plus one utilized. This measure eliminates the potential for
one-half turn should be damage to plastic piping that might result from
adequate. excessive radiantheat from the flue.

QUALITY STANDARDS

PHYSICAL AND CHEMICAL MECHANICAL PROPERTIES

CHARACTERISTICS
VISUAL APPEARANCE DIMENSIONAL CHECK OPACITYHYDROSTATICCHARACTERISTICS
EFFECT ON WATER THERMAL STABILITY BYHYDROSTATICPRESSURE RESISTANCETO EXTERNALBLO
REVERSIONTEST TENSILESTRENGTH
VICAT SOFTENING TEMPERATURE DENSITY

DEC CPVC FITTINGS UNDERGOTHE FOLLOWINGTEST PROCEDURE

Dimensional Check | Visual Appearance | Hydrostatic Pressure Test

APPLICATIONS:
RESIDENTIAL HOTELS
BUILDINGS HIGH RISE OFFICE AND INDUSTRIAL COMPLEXES
BUILDINGS COMMERCIAL COMPLEXES
HOSPITALS

AUTHORISED DEALER
TERMS&CONDITIONS :

• The GST (GOODS & SERVICES TAX) as applicable will be charged extra
• The pipes will be supplied in the standard lengths of 3/5 meters
• The pipes unit of measurement for Invoice is meter.
• The ruling prices are applicable as on date of despatch
•
• The material will be supplied in the minimum standard packing only
THE PIONEER IN PLASTIC PIPING SYSTEMS
PVC Electrical Conduits & Fittings
CPVC Pipes & Fittings