www.corally.

com
C-00175_manual-V2
 INTRODUCTION

Thank you for purchasing a Team Corally car. This manual describes the instructions for using the model and the elec-
tronic components. You will also find some tips on how to maintain your RC model so that you can enjoy it for years to
come. You have purchased one of the most efficient models available on the market that has been designed by a team
of professionals. You will also benefit from the best after-sales support. All Team Corally models guarantee a high quality
of manufacture and performance that guarantees you a high satisfaction of use and services provided by the Team
Corally. Always take the time to read the instructions carefully in order to follow all the procedures to use your RC model
safely for you and for other people and property in the area. This will allow you to take full advantage of all the perfor-
mance of your RC model.

Please also check the website www. corally.com/Downloads/ to check if you have the latest version of this instruction manu-
al. (Version: see bottom cover of this manual)
If you have any questions about the model and its components, you can send a message to info@corally.com
We also recommend that you get help from an experienced model maker or your dealer.
You will find all the references of the spare parts on the website www.corally.com

TERM OF USE
The user is responsible for the use of your model. The user assumes all risks associated with the use of the model. This
model is not intended for use by children under 14 years of age without the supervision of a responsible adult who is
familiar with the dangers of using a RC model. Team Corally / JSP Group Intl bvba, its manufacturers, distributors and
resellers cannot control the use and load of the model and therefore cannot be held responsible for any damage to
property and damage caused to persons resulting from the use of this product. You must accept these conditions and
consider yourself fully responsible for the use of this product. If not, do not use this product.

Due to the continuous development of our products, the exact specifications of the kit may vary. If you have a problem
with your new kit, please contact the store where you purchased it, indicating the part number(s).
Team Corally / JSP Group Intl bvba reserves the right to change any specification without notice. All rights reserved.

READ FIRST
This owner’s manual is designed for use with your vehicle and contains the instructions you will need to operate and
maintain your vehicle.
- We know you want to start driving immediately after unpacking, but it is very important that you take the time to read
this manual carefully, even if you are an experienced R/C driver.
- Read carefully and follow all instructions in this manual. Failure to comply with the instructions will be considered as
abuse and/or negligence which may result in the cancellation of the warranty.
- Your vehicle is designed to operate on uneven terrain. However, dust, sand, water and carpet fibres can get into your
car’s workspaces and can damage your vehicle if they are not removed quickly. We do not guarantee any warranty on
your vehicle against damage caused by external elements such as sand, dirt or water. Users are responsible for the
maintenance and safe operation of this vehicle.
- This product is not a toy. It is not suitable for users under 14 years of age, unless they are supervised by adults.
- Never attempt to disassemble electronic components. These have been carefully calibrated at the factory.
- Only improve your car with parts made for your car. If you upgrade performance, replace the entire system (such as
the motor, inverter, battery, etc.) so that all components are properly adapted. Any malfunction resulting from a custom
modification will void your warranty.
- Before driving your vehicle, please read this manual in its entirety and examine your vehicle and radio control system
for any defects.
- For better performance, some adjustments may be necessary.
- This vehicle requires a battery (included in the car or in the packaging). Make sure the vehicle’s battery is sufficiently
charged before driving, otherwise you may lose control of the vehicle.
- The radio transmitter requires 4 AA batteries (not included)
- Always remove or disconnect the battery from the vehicle to the inverter when not in use.
- Please drive your car in a spacious place. Never drive your car on the street or in traffic. Public places are subject to
specific legislation by country, city, municipality, please comply with the legislation for the use of RC models in your
region.
- This product is fully assembled in the factory. We accept no liability for damage and/or accidents resulting from custom
modifications and/or malfunctions.

2
 USE PRECAUTIONS

Failure to operate your model in a safe and responsible manner may result in injury to yourself, others or damage to
property around you.
• Do not use your model on public roads or in areas where you may encounter pedestrians or
riders.
• Do not operate in a congested area or in crowds.
• Do not operate in areas where loud noises can disturb others, such as hospitals and residential
areas.
• Do not operate your model with obstructed line of sight, at night or near water.
• Your model is radio controlled, it is subject to possible radio interference. Radio interference
can cause loss of control of your model. Be careful.
• Take care not to injure yourself while using tools to adjust or upgrade your model.
• Since the model contains small parts, keep out of reach of children while assembling and/or
disassembling your model.
• If your model becomes stuck against an object, release the throttle and retrieve it by hand
• Do not continue to apply the throttle when your model is stuck. This may damage the motor
and/or ESC/Receiver unit.
• Turn OFF your model and don’t use it if it runs erratically. Please do not use your model again
until the problem has been solved.
• Keep the wheels of the model off the ground when checking the operation of the radio equipment.
• When learning to operate your model, go to an area that has no obstacles that can damage your model.
• Before and after each use, check all the screws on the model.
• To maintain the best performance, check that all moving parts move freely.
Take all necessary precautions before, during and after using your model. You are responsible for the safe as-
sembly, maintenance and use of your model.
In case of any questions, contact your local reseller or contact Team Corally support for assistance.

SAFETY PRECAUTIONS

For your safety, always use wear gloves and goggles when assembling and maintaining your model.
Always take all necessary precautions when handling products (silicone oil, grease, thread lock, cyanolyte glue, fuel) for
the operation of the model. (Refer to the manufacturer’s instructions)
For your safety, to keep the warranty and obtain the best performance, always use original CORALLY genuine parts.

Contains: LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)

WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other
reproductive harm.
CAUTION: CANCER HAZARD
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly after using.
DO NOT use product while eating, drinking or smoking.

3
 WARRANTY

If material defects or manufacturing faults should arise in a product distributed or manufactured by

Team Corally / JSP Group Intl bvba, and purchased by a consumer, we Team Corally / JSP Group Intl bvba acknowl-
edge the obligation to correct those faults or defects within the limitations described below. This manufacturers warranty
is in addition to, and does not affect, the legal or contractual rights of the consumer which arise from the purchase of
such products. Team Corally / JSP Group Intl bvba guarantees the consumer that its products are free from material,
manufacturing, and construction faults, as determined by the general state of knowledge and technology valid at the
time of manufacturing. The fault responsible for causing the damage must be proven to have been present in the prod-
uct at this time. Claims for compensation arising from consequential damage or product liability will not be considered
valid unless they fall under peremptory provisions of the law. If material defects or manufacturing faults should arise in
a product distributed or manufactured by Team Corally / JSP Group Intl bvba in the European community (EC) and pur-
chased by a consumer, then Team Corally / JSP Group Intl bvba undertakes to correct those defects within the limita-
tions described below. This manufacturer’s declaration does not affect the consumer’s legal or contractual rights regard-
ing defects arising from the purchase contract between the consumer and the dealer or reseller. Extend of the Warranty

If a claim is made under warranty, we take at our discretion to repair or replace the defective goods. We will not consider
supplementary claims, especially for reimbursement of costs relating to the defect (e;g. installation / removal costs) and
compensation for consequent damages unless they are allowed by statute. This does not affect claims on legal regula-
tions, especially according to the product liability law.

Provisions of the Warranty

The purchaser is required to make the warranty claim in writing, and must enclose original proof of purchase (e.g.
invoice, receipt, delivery note) and the appropriate warranty card. He must send the defective goods to our local rep-
resentatives or directly to Team Corally / JSP Group Intl bvba, Geelseweg 80, 2250 Olen, Belgium at his own risk and
cost.

The purchaser should state the material defect or manufacturing fault, or symptoms of the fault, as accurate as possible,
so that we can check if our warranty obligation is applicable. The goods are transported from the consumer to us, and
from us to the consumer, entirely at the risk and cost of the consumer.

Invalidation of the Warranty

The consumer cannot make a claim under warranty when the fault is affecting the use of the product arising from natural
wear, competition use, or improper use (including installation) or external forces. The consumer’s adherence to the
building and operating instructions relevant to the model, including the installation, operation, use of, and maintenance
of, model-related components cannot be supervised by Team Corally / JSP Group Intl bvba. Therefore Team Corally /
JSP Group Intl bvba is in no way liable for loss, damage, or costs resulting from improper use, or behaviour in any way
connected to the above described provisions. Unless otherwise required by law, Team Corally / JSP Group Intl bvba is
in no way whatever liable to provide compensation for damages arising from the improper use of the model (including
personal injury, death, damage to buildings, loss of turnover, loss of business, or interruption of business, or any other
direct, or indirectly caused, consequential damage).

Duration of Validity

The claim period is 24 months from the date of purchase of the product by the consumer from a dealer in the European
Community (EC) counted from the date of purchase. The claim period is 12 months from the date of purchase of the
product by the consumer from a dealer outside the European Community (EC) counted from the date of purchase. If
a defect arises after the end of the claim period, or if evidence or documents required according to this declaration in
order to make the claim valid are not presented until after this period, then the consumer forfeits any rights or claims
from this declaration. The guarantee period is not prolonged by the granting of any claims within the framework of this
warranty, especially in the case of repair or replacement. The guarantee period also does not restart in such cases.

Warranty Expiration

If we do not acknowledge the validity of a claim based on this declaration within the claim period, all claims based on
this declaration will expire after six months from the time of registering the claim; however this cannot occur prior to the
end of the claim period.

For any support, you can contact us by email at info@corally.com

4
 LIPO BATTERY SAFETY PRECAUTIONS

• Follow and respect the manufacturer’s instructions for use

• It is important to check that your ESC is set to LIPO if you are using a LIPO battery. Failure to comply with this instruc-
tion will result in increased battery discharge and may cause fire and damage to persons and property.
• When charging or storing LiPo batteries always use LiPo Safety Bag (Flame retardant).
• Always respect the maximum rate and voltage specified by the battery manufacturer.
• Charge the LIPO battery outdoors or in a ventilated area away from flammable objects and surfaces.
• NEVER leave your LiPo battery unattended while charging.
• If the battery swells during charging, stop charging immediately and disconnect the battery from the charger. Leave
the battery outside for a few hours and observe. Then recycle the battery according to the instructions of your country/
region. Never dispose of a LIPO battery with domestic waste.
• Before recycling your defective battery, it must be neutralized. Take a plastic container, fill it with water and add a lot of
salt until the water becomes opaque. Place the LIPO battery in the water and leave for 24 hours. Check with a voltme-
ter that the voltage is 0.0V. Then recycle the battery according to local regulations.
• Never charge a damaged or inflated battery.
• Never discharge the battery cells below 3.2V.
• Always use the appropriate balancer/charger when charging your LiPo battery pack.
• When the battery is empty, check the temperature of the battery before charging it.
If the battery is very hot, wait until it cools before charging it.
• Never charge a very hot battery as this may cause an explosion or fire.
• When the battery is empty, recharge it immediately. Do not store an empty battery, the battery will continue to dis-
charge, it will fall below the minimum voltage and become unusable.

KIT CONTENT (Depends on the selected model)

www.corally.com/Downloads/

Transmitter RTR Model (Chassis with Body) User Guide

REQUIRED FOR OPERATION (Not included)

4x AA Batteries Charger
for the Transmitter 4S - 14.8V LiPo Battery

Hex Drivers
1.5mm Cross Wrench

2.0mm Silicone Oil

(for maintenance)
3.0mm

5
 CAR COMPONENTS
Front Differential

Front Shock Absorber Suspension Arm

Steering Block
Anti-Roll Bar

Steering Link

Speed Controller
(ESC) Steering Servo

Power Switch

Centre Differential
Receiver Box

Battery compartment Brushless Motor

Wheel Axle

Turnbuckle

Rear Shock Absorber Rear Suspension Arm

Rear Upright

Rear Differential

Anti-Roll Bar

6
QUICK START GUIDE

READ THE INSTRUCTIONS CHARGE THE BATTERY INSTALL 4x AA BATTERY

CHARGER

1.5V - AA BATTERY

1.5V - AA BATTERY

1.5V - AA BATTERY

1.5V - AA BATTERY
BATTERY

MAKE SURE THAT ALL SCREWS AND NUTS ARE INSTALL THE BATTERY TURN ON THE TRANSMITTER (Always First)
TIGHTENED PROPERLY.

ON
BATTERY

1. CONNECT THE BATTERY TO THE ESC CHECK THE FUNCTIONS CHECK THE RADIO SYSTEM RANGE
2. SWITCH ON THE ESC
ON

BATTERY
Move away from the max. distance you will drive the vehicle.
Check that the vehicle responds properly to the controls.
If not, reduce the distance or change the driving location.

DRIVE SLOWLY TO BEGIN WHEN FINISHING CLEAN AND MAINTAIN YOUR VEHICLE
OFF

BATTERY OFF

CHARGE THE BATTERY

CHARGER
BATTERY

BATTERY

7
 BASIC CAR SETTINGS

FRONT TOE

TOE-OUT TOE-OUT
-1° -1°

72mm

Adjust the angle by screwing the TURNBUCKLE.

FRONT CAMBER REAR CAMBER

-1° -1° -2° -2°

+ - - + + - - +

0mm
63mm 63mm
Adjust the angle by screwing the TURNBUCKLE.

Adjust the angle by screwing

the PIVOT BALL.

0mm

FRONT CASTER
28°

1mm

4mm

90° To change the Caster Angle, move the Upper Suspension Arm
forward or backward using the different CASTER CLIPS sizes.

8
BASIC CAR SETTINGS

SUSPENSION TRAVEL
It is important to properly adjust the travel of the suspension arm to prevent the shock absorber from reaching the end of its travel
and damaging it.
• Place the chassis on a block in order to release the suspension to the maximum.
• Measure the distance between the 2 fixing points of the shock absorber.
• If necessary adjust the FR & RE suspension travel by screwing the set screw on the FR & RE lower suspension arm.

FRONT REAR

130mm
118mm

Release the Release the

suspension suspension

RIDE HEIGHT
To achieve the correct ground clearance setting, follow the instructions below.

• Lift the car by ±30cm and drop the car on the floor.
• The front and rear suspension arms should be ± parallel to the ground. (Neutral setup)
• Adjust the tension of the shock absorber spring according to the type of terrain.

30cm

FOR BUMPY GROUND FOR FLAT GROUND / ROAD

9
 SHOCK ABSORBER MAINTENANCE

It may be necessary to replace the silicone oil in the shock absorbers every 40 runs.
It depends on how you drive and the type of terrain you drive on.

Remove the shock absorbers from the car. (4x) Remove the shock cap. Drain the oil from the shock absorber.

FILL THE SHOCK ABSORBERS WITH NEW SILICONE OIL ALWAYS USE SILICONE OIL, NEVER USE ANY OTHER TYPES OF OIL.

FILL MOVE WAIT TIGHTEN MOVE TIGHTEN

NE
UP 50% UP FULLY
CO
LI IL
SI O

5min

SLOWLY
3-4x

• Pull the Shock shaft • Move the piston up&down • Pull the Shock shaft • Install the silicone mem- • Gently move the piston • Allow the piston in the
down. (3-4x) to release the air down. brane in the shock cap. in upper position. upper position.
• Fill the shock body with bubbles in the silicone • Install the shock absorb- • Tighten slightly the • The excess will flow out • Tighten the cap fully but
silicone oil. oil. er vertically and let it sit shock cap on the shock of the shock absorber. not too much otherwise
• Front : 450cps for a few minutes until body. the membrane will be
Rear : 400cps the bubbles rise to the • A little oil will flow out of deformed.
surface. the shock absorber.

FRONT REAR
SILICONE OIL SPRING TENSION SILICONE OIL SPRING TENSION SHOCK PISTON
TRACK USE 450CPS 4mm 400CPS 0mm 6 Holes Ø1.3mm
OFF-ROAD 600CPS 4mm 500CPS 0mm 6 Holes Ø1.3mm
BASHING 650CPS 4mm 550CPS 0mm 6 Holes Ø1.3mm
.www. corally.com/Chemicals/Silicone-Oils/
SPRING TENSION

10
SHOCK ABSORBER - EXPLODED VIEW

Do not overtighten the Shock Cap to

prevent deformation of the silicone C-00180-080 Shock Piston
Shock Bladder.
C-00180-133

C-00180-189 Set content

Shock Piston - 4x1.6
Shock Piston - 4x1.8
C-31001-25
Shock Piston - 5x1.4
C-00180-080
Shock Piston - 5x1.5
C-00180-190 Shock Piston - 5x1.6
Shock Piston - 6x1.4
Shock Piston - 6x1.3
Shock Piston - 8x1.2
Shock Piston - 8x1.3

C-00180-166 (Front)
C-00180-164 (Rear)

C-00180-137 (Front) Place all small parts on a screwdriver (Ø3mm)

C-00180-134 (Rear) C-00180-188 and push them into the shock body. All parts
will be properly aligned.

C-00180-078
C-00180-191

APPLY
SILICONE OIL C-00180-188

C-00180-138

C-00180-290 (Front)
C-00180-192 C-00180-287 (Rear)

C-00180-136

C-00180-027

C-00180-029

C-00180-149

11
 DIFFERENTIAL MAINTENANCE

It may be necessary to replace the silicone oil every 50 runs.

It depends on how you drive and the type of terrain you drive on.

• 1. Remove 2 screws under the chassis.

• 2. R emove the 2 shock absorbers fixing screws.
Rotate the shock absorbers upwards
• 3. Loosen the fixing screws of the ANTI-ROLL BAR.
• 4. R emove the 2 fixing screws from the differential
cover.
• 5. Extract the differential.
• 6. Unscrew the differential. (4x F/H M3x10)
• 7 Drain the silicone oil from the differential.
• 8 F ill with new silicone oil but not fully.
(75% capacity max.)

IL
NEO
ICO
SIL

75%
CAPACITY MAX.

Perform the same maintenance operations for the centre and rear differentials.

Use the correct grade of silicone oil according to the operation.

Use only Silicone Oil, never use any other types of oil.

FRONT DIFF CENTRE DIFF REAR DIFF

TRACK USE 7500CPS 15.000CPS 5000CPS
OFF-ROAD 10.000CPS 30.000CPS 7500CPS
BASHING 20.000CPS 50>100.000CPS 10.000CPS

www. corally.com/Chemicals/Silicone-Oils/

12
FRONT & REAR DIFFERENTIAL - EXPLODED VIEW

C-00180-153-1

C-00180-205
C-3611-4-08-16-05
C-00180-179 (set)

C-00180-182

C-00180-184

C-00180-178 C-00180-205
C-00180-183

C-00180-182

C-3611-4-08-16-05

C-00180-153-1

C-00180-098

CENTRE DIFFERENTIAL - EXPLODED VIEW

C-00180-154-1

C-00180-205
C-3611-4-08-16-05
C-00180-179 (set)

C-00180-182

C-00180-184

C-00180-091 C-00180-205
C-00180-183-1

C-00180-182

C-3611-4-08-16-05

C-00180-154-1

C-00180-090

13
 GEAR RATIO

MOTOR PINION MOD1.0

High-performance 13T tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures
unparalleled concentricity. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for
vibration-free operation. Each pinion is marked with the tooth number for easy and quick identification.

• Special hardened steel

• CNC cut teeth for perfect teeth shape and concentricity
• Module MOD1
• fits all cars with MOD1 gears (1/8 Scale)
• for 5.0mm motor shafts
www.corally.com/Pinions-Gears/Pinions-MOD1/

Motor 11T 12T 13T 14T 15T 16T 17T 18T 19T 20T 21T 22T 23T
Pinion C-72711 C-72712 C-72713 C-72714 C-72715 C-72716 C-72717 C-72718 C-72719 C-72720 C-72721 C-72722 C-72723

Spur Gear 46T 46T 46T 46T 46T 46T 46T 46T 46T 46T 46T 46T 46T

3,08 12,87 11,79 10,89 10,11 9,44 8,85 8,33 7,86 7,45 7,08 6,74 6,43 6,15
Standard Not Not Not Not Not Not Not Not Not Not
Optional Optional
Fitted Suitable Suitable Suitable Suitable Suitable Suitable Suitable Suitable Suitable Suitable

+TORQUE +SPEED

GEAR MESH ADJUSTMENT

If the gear mesh is not correct, you wear out the spur gear prematurely, the transmission will make noise, give unnecessary load on the
motor (higher consumption, heating of the transmission).

PAPER STRIP 1x8cm

1. Loosen the screws. 4. Turn the spur gear to run the paper through
the teeth.
2. Insert the paper strip.
Stop when the paper is in the middle.
3. Push the motor against the spur gear. Make sure that the motor pinion is against
the spur gear.
5. Tighten the fixing screws.

14
FRONT DRIVE TRAIN - EXPLODED VIEW

C-00180-117
C-00180-108
C-00180-329 DIN913•M4x4
C-00180-122
C-00180-108
C-00180-009 C-00180-123

Nylstop Nut•M3
C-3611-4-08-16-05
M3x16
M3x10
C-3611-4-08-16-05
C-00180-207
C-00180-340 C-00180-150
C-00180-039
Steel Shim•M6
C-00180-144

C-00180-101
C-00180-040
C-00180-150
C-00180-193
M3x16
C-00180-149
C-00180-089
C-00180-100

M3x20

C-00180-051

C-00180-240 M4x10
C-00180-055 C-3611-4-08-16-05
DIN913•M5x4
C-00180-155-1
Nylstop Nut•M3

C-00180-322
C-00180-100
M4x10
M3x16 C-00180-033
C-00180-149
C-00180-089
C-3611-4-08-16-05

C-00180-156
DIN913•M3x3
C-00180-101 C-00180-322
C-00180-220

C-00180-150 C-00180-197
C-00180-040
Steel Shim•M6
C-00180-033
C-00180-340 C-00180-144
C-00180-231
M2.5x18
DIN913•M3x3
C-3611-4-08-16-05
C-00180-039 C-00180-033
C-00180-150 C-00180-240
Nylstop Nut•M3 C-00180-220 C-00180-051
DIN913•M3x3 M3x10
M3x10
C-3611-4-08-16-05 M2.5x10
M3x16
M3x30
C-00180-009 DIN913•M3x3
C-00180-122 C-00180-207 C-00180-032
C-00180-123 C-00180-329
C-00180-123
C-00180-108 C-00180-109 (4)
DIN913
M4x4 C-00180-108
C-00180-219 (2)

C-00180-117
C-00180-106 C-00180-048
Nylstop Nut•M4
M3x10
C-00180-068

C-00180-104
C-00180-148 (2)
C-00180-106
M3x12

M3x14
C-00180-149
M3x16
M3x10

C-00180-030
M3x14
C-00180-149
C-00180-030 M3x16

Nylstop Nut•M3

15
 REAR DRIVE TRAIN - EXPLODED VIEW

M3x14
C-00180-226-B

C-00180-005

F/H•M3x10 (2) Nylstop Nut•M3

M3x20
C-00180-005

C-00180-005

C-00180-251 (2) M3x12 (2)

Nylstop Nut•M3 (4)
Nylstop Nut•M3 Nylstop Nut•M3

C-00180-005
C-00180-030 DIN912•M3x25
C-00180-122
M3x14 C-00180-148 C-00180-055 DIN913•M4x4
M3x16
C-00180-041 C-00180-329
C-00180-373

Nylstop Nut•M3 C-3611-4-08-16-05

C-00180-293
C-00180-030
C-00180-008
C-00180-055
Nylstop Nut•M4
C-00180-143
C-3611-4-08-16-05
C-00180-148 C-00180-021
C-00180-127
C-00180-041 Nylstop Nut•M3
M3x10 (2) C-00180-170
Nylstop Nut•M3 M2.5x10 (2) C-00180-370
DIN913•M3x3
Nylstop Nut•M3
Nylstop Nut•M4 DIN913•M3x3 (2) C-00180-220 C-00180-367
C-00180-033 C-00180-231
M3x20 (2) C-00180-033 M3x216
M3x30 (2)
M2.5x18 C-00180-238

C-00180-246 C-00180-149
C-00180-090

DIN913•M3x3
C-00180-220 C-00180-322 C-00180-089
C-00180-156 M3x16
C-00180-052
C-3611-4-08-16-05

Nylstop•M3 M4x8 C-00180-149

M3x20 C-00180-055
C-00180-033

C-00180-020 Nylstop Nut•M3 (4)

M3x25 C-3611-4-08-16-05
C-00180-322
C-00180-155-1
M3x216 M4x8 C-00180-238

C-00180-149 DIN913•M5x4
C-00180-170 C-00180-052
Nylstop Nut•M3
C-00180-041 C-00180-055
C-00180-089
M3x20
C-00180-149
Nylstop Nut•M4
M3x16 C-00180-105
C-00180-090 M3x12
C-00180-143

C-00180-223
C-00180-367
Nylstop Nut•M3
M3x25

C-00180-055
C-00180-103 Nylstop Nut•M4
C-00180-041
C-00180-370
C-00180-293
C-00180-105
C-00180-008 C-3611-4-08-16-05 C-00180-186 Nylstop Nut•M4

C-3611-4-08-16-05 C-00180-055
C-00180-122
C-00180-329
C-00180-127 Nylstop Nut•M3
Nylstop Nut•M3 M3x12
DIN913•M4x4
Nylstop Nut•M4

16
CHASSIS - EXPLODED VIEW

C-00180-301
F/H•M3x8
F/H•M3x14

F/H•M3x8 Nylstop Nut•M3 C-54055

C-00180-301 M4x12
C-00180-305
C-00180-301 C-00180-023
C-00180-177
DIN913•M4x4
C-00180-301
M3x10 C-00180-301 Nylstop Nut•M3 C-00180-154-1
C-00180-305 C-3611-4-08-16-05
F/H•M3x8 M4x12
M3x12 M3x8
M3x30
C-00180-372
C-00180-205 C-72713
M3x10
C-00180-171
F/H•M3x14
C-00180-044 C-00180-091
M3x18 C-52021 C-00180-183-1
F/H•M3x6 C-00180-179 (set)
C-00180-182
C-00180-205 C-00180-176
C-00180-184
C-00180-015
C-00180-044
C-00180-129 M3x12
C-3104-40
C-00180-182

C-00180-149 C-00180-018
C-00180-013
C-54011
Nylstop Nut•M3 C-00180-090
M3x12 C-3611-4-08-16-05
M3x8 C-00180-154-1
M3x10
M3x12

C-00180-013
M3x8
C-00180-017 F/H•M3x8 C-00180-242
C-00180-004
C-3611-2-06-10-03
C-31205
F/H•M3x8
C-00180-145

Nylstop Nut•M3 C-00180-206

M3x6
C-00180-036 F/H•M3x8
C-31205
C-00180-102
Nylstop Nut•M3 C-00180-242
C-00180-216 C-00180-206
C-00180-032
C-3611-2-06-10-03
C-00180-145
C-00180-191 C-00180-328
C-00180-175 C-00180-036
C-3611-2-06-10-03
M3x6 F/H•M4x20

C-3611-2-06-10-03

M3x6 F/H•M4x14
C-00180-147

F/H•M4x10

F/H•M3x10
F/H•M4x10

F/H•M4x12
F/H•M3x12 F/H•M4x14
F/H•M4x14 (2)
F/H•M4x10
F/H•M4x14

F/H•M4x12
F/H•M4x20

17
 SPARE PARTS

SEE SPARE PARTS AT

www.corally.com
C-00180-004 C-00180-004-1 C-00180-005 C-00180-008
Battery - ESC Tray - Composite Battery Strap - Hook & Loop Wing Mount - Adjustable - Hub - Rear - Composite - 1 pc
- 1 pc - 2 pcs Composite - 1 Set

C-00180-009 C-00180-013 C-00180-015 C-00180-017 C-00180-018

Steering Block - Pillow Ball Cup Servo Mount - Receiver Box - Centre Diff Plate - Spur Gear Arm Holder - Steering Deck - Centre Diff Bulkhead - Compos-
(2) - Front - Composite - 1 set Composite - 1 Set Cover - Composite - 1 pc Composite - 1 pc ite - 1 Set

C-00180-020 C-00180-021 C-00180-023 C-00180-027 C-00180-029

Gearbox Brace Mount A - Rear - Gearbox Brace Mount Stiffener Motor Mount Centre Diff Insert - Body Post - Composite - 2 pcs Shock Spring Cup - Composite
Composite - 1 pc - Composite - 1 pc Composite - 1 pc - 4 pcs

C-00180-030 C-00180-032 C-00180-033 C-00180-036 C-00180-039

Shock Bushing - Composite - Bumper - Front - Rear - Com- Gearbox Case Set - Composite Bumper - Front - Rear - Com- Steering Ball Cups - Composite
4 pcs posite - 1 set - 1 Set posite - 1 set - 1 set

C-00180-041 C-00180-044 C-00180-048 C-00180-051 C-00180-052

Rear Camber Ball Cups - Outer Ball Joint 6mm - Composite - Bushings Set - 0 Deg - Suspension Arm Mount - Front - Suspension Arm Mount - Rear -
- Inner - 1 set 2 pcs Composite - 1 Set Composite - 1 Set Composite - 1 Set

C-00180-055 C-00180-078 C-00180-080 C-00180-089 C-00180-090

Suspension Arm Shim - Com- Shock Body Insert - Washer - Shock Piston - Composite - 9 Anti-Roll Bar Ball Cups - Com- Diff Case - Centre - Composite
posite - 1 Set Composite - 1 set versions - 4 pcs/type posite - 4 pcs - 1 pc

C-00180-091 C-00180-098 C-00180-099 C-00180-100 C-00180-101

Spur Gear 46T - Steel - 1 pc Diff Case - FR-RE - Composite Suspension Arm Long - Lower - Suspension Arm Long - Lower - Suspension Arm Long - Upper -
- 1 pc Rear - Composite - 1 pc Front - Composite - 1 pc Front - Composite - 1 pc

18
 SPARE PARTS

C-00180-102 C-00180-103 C-00180-104 C-00180-105 C-00180-106

Chassis Brace - Front - Com- Chassis Brace - Rear - Com- Shock Tower Brace - Front - Shock Tower Brace - Body Mount Body Post - Front - Composite
posite - 1 pc posite - 1 pc Composite - 1 pc - Rear - Composite - 2 pcs - 2 pcs

C-00180-109 C-00180-117 C-00180-122 C-00180-123 C-00180-127

Caster Clips Set - 1 to 4.5mm Pivot Ball Adjusting Nut - Alu- Pin 2.5x17mm - Steel - 10 pcs Pivot Ball - Steel - 4 pcs Hinge Pin - Outer - Steel - 2 pcs
- 1 Set minium - 4 pcs

C-00180-129 C-00180-133 C-00180-134 C-00180-136 C-00180-137

Turnbuckle - M3 - 35mm - Shock Cap - Aluminium - Hard Shock Body - Rear - Aluminium Shock Collar - Aluminium - Shock Body - Front - Aluminium
Steel - 2 pcs Anodised - 2 pcs - Hard Anodised - 1 pc Hard Anodised - 2 pcs - Hard Anodised - 1 pc

C-00180-143 C-00180-144 C-00180-145 C-00180-147 C-00180-148

Turnbuckle - M5 - 92mm - Turnbuckle - M4 - 92mm - Servo Saver Shaft w/ Nut - Servo Saver Post - Steel - 2 pcs Shock Screw - Steel - 4 pcs
Steel - 2 pcs Steel - 2 pcs Aluminium - 1 pc

C-00180-149 C-00180-150 C-00180-153-1 C-00180-154-1 C-00180-155-1

Ball - 5.8mm - Steel - 4 pcs Ball Shouldered - 6.8mm - Steel Diff. Outdrive Cup - Steel - Centre Diff. Outdrive Cup - Steel Pinion Outdrive Cup - Steel -
- 4 pcs 2 pcs - 2 pcs 2 pcs

C-00180-156 C-00180-164 C-00180-166 C-00180-168 C-00180-170

Bevel Pinion 13T - Steel - 1 pc Shock Shaft - 66mm - Rear - Shock Shaft - 61mm - Front - Shock Tower - 4mm - Alumini- Ball - 6.8mm - Steel - 2 pcs
Steel - 2 pcs Steel - 2 pcs um - Front - 1 pc

C-00180-171 C-00180-175 C-00180-176 C-00180-177 C-00180-178

Threaded Ball - 6mm - Steel - Steering Rack - Aluminium Motor Bulkhead - Aluminium Motor Mount - Aluminium - 1 pc Diff. Bevel Gear 43T - Steel -
2 pcs 7075 - 1 pc - 1 pc 1 pc

19
 SPARE PARTS

C-00180-179 C-00180-182 C-00180-183 C-00180-184 C-00180-186

Planetary Diff. Gears - Steel - O-Ring - Silicone - 5x8mm - Diff. Gasket - 4 pcs Gear Diff. Pin - Steel - 2 pcs Chassis Brace Link - Steel - 1 pc
1 Set 5 pcs

C-00180-188 C-00180-189 C-00180-190 C-00180-191 C-00180-192

O-Ring - Silicone - 4x8mm - Shock Bladders - Silicone - Shock Washer - 2.5x6x0.5mm - O-Ring - Silicone - 9x12mm O-Ring - Silicone -
5 pcs 4 pcs Steel - 10 pcs - 5 pcs 16.2x19.8mm - 5 pcs

C-00180-193 C-00180-197 C-00180-204 C-00180-205 C-00180-206

Drive Shaft - Centre - Front - Anti-Roll Bar - 2.4mm - Front Shim Rings - 6x18x0.2mm - Diff. Outdrive Pin - 2x11,8mm - Steering Rack Bushing - Steel
Steel - 1 pc - 1 pc Steel - 10 pcs Steel - 4 pcs - 2 pcs

C-00180-207 C-00180-216 C-00180-219 C-00180-220 C-00180-223

Steering Block Arms - Servo Saver Spring - 1 pc Suspension Arm Pivot Pin - Ball End 5.8mm - for Anti Roll Centre Drive Shaft - Truggy -
Aluminium - 2 pcs Upper - Front - Steel - 2 pcs Bar - Steel - 4 pcs Rear - Steel - 1 pc

C-00180-226-B C-00180-230 C-00180-231 C-00180-238 C-00180-240

Wing - Composite - 1 pc Wheel Nut - Aluminium - Collar - for Anti-roll Bar - Alu- Suspension Arm Mount - Rear - Suspension Arm Mount - Front -
Ribbed - 4 pcs minium - 1 pc Aluminium - 1 set Aluminium - 1 Set

C-00180-242 C-00180-246 C-00180-251 C-00180-287 C-00180-290

Side Guards - Left-Right - Com- Anti-Roll Bar - 2.6mm - Rear Wing Washer - Composite. - Shock Spring - Medium - Rear Shock Spring - Medium - Front
posite - 1 Set - 1 pc 2 pcs - 2 pcs - 2 pcs

C-00180-293 C-00180-301 C-00180-305 C-00180-316

Ball 6.8mm - Steel - 4 pcs Centre Roll Cage Mount - Com- Centre Roll Cage Pin - Steel - Shock Cap - Lower - Aluminium C-00180-322
posite - 1 Set 2 pcs - 2 pcs Suspension Arm Pivot Pin - Low-
er Inner - Fr/Re - Steel - 2 pcs

20
SPARE PARTS

C-00180-328 C-00180-329 C-00180-340 C-00180-367 C-00180-370

Chassis - Long - Truggy XP RTR Wheel Hex Adapter - Wide RTR CVD Drive Shaft - Long - Front Dogbones - Long - Rear - Steel Drive Axle - Rear - Steel - 2 pcs
- Aluminium - 1 pc - Aluminium - 2 pcs - 1 pc - 2 pcs

C-00180-372 C-00180-373 C-00180-384 C-00180-386 C-52021

Servo Arm - Steering - Alu - Shock Tower - MT - Truggy - Polycarbonate Body - Shogun Off-Road 1/8 Truggy Tires - Digital Servo - CR-7220-MG
1 pc 5mm - Aluminium - Rear - 1 pc XP 6S - Painted - Cut - 1 pc Glued on Black Rims - 1 pair - Low Voltage - Core Motor -
Metal Gear – 20 Kg Torque

C-54011 C-54055 C-72713 C-00180-183-1

Speed Controller - TOROX 185 - Electric Motor – Kuron 825 - M1.0 Pinion - Hardened Steel - Central Diff. Gasket - 4 pcs
4-Pole - 2050 KV – Brushless
Brushless - 2-6S - Sensorless 13 Teeth - Shaft Dia. 5mm

C-3201-60 C-31205 C-3104-40 C-3611-4-06-10-03 C-3611-4-08-16-05

Steel Shim - M6 - 10 pcs Aluminium Washer - for M3 Flat Steel Nut - Low Profile - M4 - Ball Bearing - Abec 3 Ball Bearing - Abec 3
Head Screws - Red - 10 pcs 10 pcs 6x10x3mm - 2 pcs 8x16x5mm - 2 pcs

SOCKET HEAD SCREWS - 10 PCS FLAT HEAD SCREWS - 10 PCS BUTTON HEAD SCREWS - 10 PCS SET SCREWS - 10 PCS NYLSTOP NUT - 10 PCS
C-3001-25-10 M2.5x10 C-3002-30-08 M3x8 C-3003-30-06 M3x6 C-3004-30-03 M3x3 C-31001-25 M2.5
C-3001-25-20 M2.5x20 C-3002-30-10 M3x10 C-3003-30-10 M3x10 C-3004-30-05 M3x5 C-31001-30 M3
C-3001-30-06 M3x6 C-3002-40-10 M4X10 C-3003-30-12 M3x12 C-3004-40-04 M4x4 C-31001-40 M4
C-3001-30-08 M3x8 C-3002-40-12 M4x12 C-3003-30-16 M3x16 C-3004-50-04 M5x4
C-3001-30-10 M3x10
C-3002-40-14 M4x14 C-3003-40-12 M4x12
C-3001-30-12 M3x12
C-3002-40-16 M4x16
C-3001-30-14 M3x14
C-3001-30-16 M3x16 C-3002-40-18 M4x18
C-3001-30-20 M3x20
C-3001-30-25 M3x25
C-3001-30-30 M3x30
C-3001-40-08 M4x8

21
 OPTION PARTS

C-00180-157 C-00180-195 C-00180-196 C-00180-198 C-00180-199

Wing Washer - Lightened - Anti-Roll Bar - 2.6mm - Front Anti-Roll Bar - 2.5mm - Front Anti-Roll Bar - 2.2mm - Front Anti-Roll Bar - 2.0mm - Front
Aluminum - 2 pcs - 1 pc - 1 pc - 1 pc - 1 pc
Graphite 3mm Graphite 3mm Graphite 3mm Graphite 3mm

C-00180-224 C-00180-232 C-00180-233 C-00180-234 C-00180-235

Fan Holder - Composite - 1 set Susp. arm stiffener - A - Lower Susp. arm stiffener - A - Lower Susp. arm stiffener - B - Lower Susp. arm stiffener - B - Lower
Front - Right - Graphite 3mm - 1 pc Front - Left - Graphite 3mm - 1 pc Front - Right - Graphite 3mm - 1 pc Front - Left - Graphite 3mm - 1 pc
Graphite 3mm Graphite 3mm

C-00180-236 C-00180-237 C-00180-247 C-00180-248 C-00180-249

Suspension arm stiffener - Rear Suspension arm stiffener - Rear Anti-Roll Bar - Rear - 2.8mm Anti-Roll Bar - Rear - 3.0mm Anti-Roll Bar - Rear - 2.4mm
- Right - Graphite 3mm - 1 pc - Left - Graphite 3mm - 1 pc - 1 pc - 1 pc - 1 pc
Fits part C-00180-104 Fits part C-00180-103 Fits part C-00180-105 Graphite 1.5mm

C-00180-255 C-00180-256 C-00180-257 C-00180-266 C-00180-272

Chassis Brace Stiffener - Front Chassis Brace Stiffener - Rear Shock Stay Stiffener - Rear - Servo Saver Steering Arm - Susp. arm stiffener - A - Lower Front
- Graphite 2.5mm - 2 pcs - Graphite 2.5mm - 2 pcs Graphite 2.5mm - 2 pcs Aluminium - 1 pc - Right - Graphite 1.5mm - 1 pc
Graphite 1.5mm Graphite 1.5mm Graphite 1.5mm

C-00180-273 C-00180-274 C-00180-275 C-00180-284 C-00180-286

Suspension arm stiffener - A - Lower Susp. arm stiffener - B - Lower Front Susp. arm stiffener - B - Lower Front Wheel Nut - Closed - Aluminium Shock Spring - Soft - Rear
Front - Left - Graphite 1.5mm - 1 pc - Right - Graphite 1.5mm - 1 pc - Left - Graphite 1.5mm - 1 pc - 4 pcs - 2 pcs

C-00180-288 C-00180-289 C-00180-291 C-00180-294 C-00180-315

Shock Spring - Hard - Rear Shock Spring - Soft - Front Shock Spring - Hard - Front Wheelie Bar - Complete Set Steering Block Arms - Graphite
- 2 pcs - 2 pcs - 2 pcs 2.5mm - 2 pcs

C-00180-345 C-00180-378 C-00180-379 C-00180-380 C-00180-385

CVD Drive Shaft - Long - Rear Off-Road 1/8 MT Tires - Gripper Polycarbonate Body - Kronos XP Polycarbonate Body - Kronos XP Polycarbonate Body - Shogun
- 1 pc - Glued on Black Rims - 1 pair 6S - Painted - Cut - 1 pc 6S - Clear - Cut - 1 pc XP 6S - Clear - Cut - 1 pc

22
NOTE

DECLARATION OF CONFORMITY
EU-Konformitätserklärung/ Déclaration de Conformité UE

(in accordance with ISO/IEC 17050-1) / (in Übereinstimmung mit ISO/IEC 17050-1) /
(Conformément à la norme ISO/IEC 17050-1)

Description : 1/8 SHOGUN - TRUGGY - 4WD - RTR

Item Number: C-00175

This declaration is issued under the sole responsibility of the manufacturer.

Die alleinige Verantwortung für die Ausstellung dieser Erklärung trägt der Hersteller.
La présente déclaration est établie sous la seule responsabilité du fabricant.

Product(s)/Produkt(e)/ Produit(s) : 1/8 SHOGUN - TRUGGY - 4WD - RTR

The object of declaration described above is in conformity with the relevant Union harmonization Legislation, specifically the
requirements of the specifications listed below, following the provisions of the European RED Directive 2014/53/EU:
Der Gegenstand dieser Erklärung ist konform mit den Harmonisierungsrechtsvorschriften der Europäischen Union, insbesondere
mit den unten aufgeführten Bestimmungen, und folgt der europäischen RED Direktive 2014/53/EU:
L’objet de la déclaration décrit ci-dessus est conforme à la législation pertinente en matière d’harmonisation de l’Union eu-
ropéenne, en particulier les exigences des spécifications énumérées ci-dessous, conformément aux dispositions des directives
européennes RED 2014/53/EU:

EN 300 440 V2.1.1:2017 EN 301 489-3 V1.6.1:2013

EN 301 489-1 V2.1.1:2017 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010 EN 55024:2010+A1:2015
EN 55032:2015 EN 61000-3-3:2013
EN 61000-3-2:2014

JSP GROUP INTL • Geelseweg, 80 • 2250 Olen • Belgium

Signed for and on behalf of/ Unterzeichnet für und im Namen von/ Signé pour et au nom de :

Place/Ort/Lieu and Date/Datum/Data : Olen, Belgium, 12 October 2019

Name/Nom: Stefan Engelen Signature/Unterschrift :

Title/Titel/Titre : Ceo

FEDERAL COMMUNICATIONS COMMISSION

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE JSP GROUP INTL BVBA / CORALLY, and is VALID ONLY
for the equipment identified hereon for use under the Commission’s Rules and Regulations listed below.

FCC IDENTIFIER : 2ASZJ-VP010005

Name of Grantee : JSP GROUP INTL BVBA / CORALLY
Equipment Class : Part 15 Low Power Communication Device Transmitter
Notes : VARIOPROP S2R
FCC Rules : 15C
Frequency Range (MHZ) : 2410.0 - 2480.0

23