DATASHEET - AFDD-40/2/C/003-LI/A

Arc Fault Detection Device, 2p, C, 40 A, 30 mA, type LI/A

Part no.  AFDD-40/2/C/003-LI/A

Catalog No.  187241
 
EL-Nummer 1601456
(Norway) 
Similar to illustration

Delivery program
Basic function     Arc fault detection device

Number of poles     2 pole

Tripping characteristic     C

Application     Switchgear for residential and commercial applications

Rated current In A 40

Rated switching capacity according to IEC/EN 60898-1 Icn kA 6

Rated switching capacity according to IEC/EN 61009   kA 6

Rated short-circuit strength Icn kA 6

Rated fault current IΔN A 0.03

Type     Type LI/A

Tripping   s… Short time-delayed

Busbar type     ZV-SS

Product range     AFDD

Sensitivity     Pulse-current sensitive

Impulse withstand current     Partly surge-proof 250 A

Technical data
Electrical
Types conform to     IEC/EN 62606
IEC/EN 61009

Current test marks     As per inscription

Rated switching capacity according to IEC/EN 60898-1 Icn kA 6

Limit values of the operating voltage      

Test circuit   V AC 170 - 264

Sensitivity     Pulse-current sensitive

Rated short-circuit strength Icn kA 6

lifespan      

Electrical Operations   ≧ 4000

Mechanical Operations   ≧ 20000

Mechanical
Standard front dimension   mm 45

Device height   mm 80

Built-in width   mm 54 (3TE)

Mounting     Tristable slide catch enables removal from existing combination.

Degree of Protection     IP20 switches

IP40 enclosed

Terminals top and bottom     Twin-purpose terminals

Terminal protection     finger and hand touch safe, DGUV VS3, EN 50274

Thickness of busbar material   mm 0.8 - 2

Admissible ambient temperature range   °C -25 - +40

Permissible storage and transport temperatures   °C -35 - +60

Climatic proofing     according to IEC/EN 61009

Contact position indicator     red / green

10/18/2022 Eaton 187241 ED2022 V93.0 EN 1/3

Design verification as per IEC/EN 61439
Technical data for design verification      

Rated operational current for specified heat dissipation In A 40

Equipment heat dissipation, current-dependent Pvid W 10.5

Operating ambient temperature min.   °C -25

Operating ambient temperature max.   °C 40

IEC/EN 61439 design verification      

10.2 Strength of materials and parts      

10.2.2 Corrosion resistance     Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures     Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat     Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat     Meets the product standard's requirements.
and fire due to internal electric effects

10.2.4 Resistance to ultra-violet (UV) radiation     Meets the product standard's requirements.

10.2.5 Lifting     Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact     Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions     Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES     Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances     Meets the product standard's requirements.

10.5 Protection against electric shock     Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components     Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections     Is the panel builder's responsibility.

10.8 Connections for external conductors     Is the panel builder's responsibility.

10.9 Insulation properties      

10.9.2 Power-frequency electric strength     Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage     Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material     Is the panel builder's responsibility.

10.10 Temperature rise     The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.

10.11 Short-circuit rating     Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.12 Electromagnetic compatibility     Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.13 Mechanical function     The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.

Technical data ETIM 8.0

Circuit breakers and fuses (EG000020) / Earth leakage circuit breaker with auxiliary device (EC002695)

Electric engineering, automation, process control engineering / Electrical installation, device / Residual current protection system / Earth leakage circuit breaker with auxiliary device
(ecl@ss10.0.1-27-14-22-13 [ADI479007])

Number of poles     2

Rated voltage   V 230

Rated current   A 40

Rated fault current   A 0.03

Leakage current type     A

Current limiting class     3

Rated short-circuit breaking capacity according to EN 61009   kA 6

Rated short-circuit breaking capacity according to IEC 60947-2   kA 0

Frequency   Hz 50

Release characteristic     C

Concurrently switching neutral conductor     No

Over voltage category     3

Pollution degree     2

Width in number of modular spacings     3

Built-in depth   mm 67

Additional equipment attached at delivery     Fire protection switch

Rated switch current auxiliary device   A 0

10/18/2022 Eaton 187241 ED2022 V93.0 EN 2/3

Rated voltage auxiliary device   V 230

Control voltage type auxiliary equipment     AC

Degree of protection (IP)     IP20

10/18/2022 Eaton Industries GmbH 3/3

http://www.eaton.eu
© 07/2022 by Eaton Industries GmbH
Eaton 187241 ED2022 V93.0 EN