Technical data LB 28

Drilling rig

LB28_englisch_usa.indd 1 10.03.2008 11:41:05

 Concept and characteristics

Kelly rope Leader top for Kelly rope

Tensioning cylinder for

Leader top for auxiliary rope crowd system

Rotary

Kelly bar

Inclination device

Casing driver

Crowd winch

Radius adjustment device

Auxiliary winch

Casing oscillator
Kelly winch

Undercarriage Uppercarriage

• High engine output with automatic engine speed control • Automatic vertical alignment
• Controlled entirely from cab • High alignment forces
• Sturdy and solid rig design • Simultaneous control of several movements via
• Solid parallel kinematics on the basic machine Load-sensing multi-circuit hydraulics
• High pull and push forces • Quick assembly of rotary possible through quick
connection
• High torque
• Equipment design according to latest European
• Completely self-rigging (no auxiliary machines required)
regulations and standards
• Large range of working tools (all common drilling works
• All components designed to fulfill the special
can be performed)
requirements of a drilling rig
• Stepless leader inclination ° forward - 1° backward
• High manufacturing quality through quality control by
depending on type of equipment
the PDE-system

2 LB 28

LB28_englisch_usa.indd 2 10.03.2008 11:41:11

 Transport dimensions and weights
80´11´´ 9´10´´

11´10´´
47.3´´
35.4´´

15.7´´
22´11´´ 19´4´´ 38´5´´ 11´6´´

Transport with leader Dimensions and weights

includes the basic machine (ready for operation) with leader, without Leader length 72.2 ft
working tools (such as rotary, Kelly bar etc.) and without counterweight. Weight complete without counterweight 10,3 lbs

80´11´´ 8´3´´
7´8´´ 25´5´´

8´
Transport leader Dimensions and weights
includes the leader without working tools Leader length 72.2 ft
(such as rotary, Kelly bar etc.). Weight complete 3,30 lbs
Lower part of the leader 3,310 lbs
Upper part of the leader with leader top 10,140 lbs

Counterweight I
26´7´´ 9´10´´
5´2´´

7´5´´
´11´10´´

9´10´´ 26´´

Counterweight II
47.2´´

4´11´´
5´2´´
15.7´´

35.4´´
19´4´´ 11´6´´ 9´10´´ 7´´ 6´3´´

Transport basic machine Weights Rotary

ready for operation, without counterweight. Counterweight I 22,00 lbs Transport weight
Transport weight 97,000 lbs Counterweight II 11,00 lbs BA 280 14,770 lbs
Weights can vary with the final configuration of the machine.

LB 28 3

LB28_englisch_usa.indd 3 10.03.2008 11:41:33

 Dimensions
Basic machine LB 28

5° 15° 5° 5°

84´

24,2´´

43,3´´
13´10´´ 35.4´´
17´11´´ 13´9´´ 15´5´´

R1
19´4´´ 4´

Technical data Operating weight

Total height 84 ft Total weight with 31. inch 3–web shoes 210,800 lbs
Total weight with 3.4 inch 3–web shoes 212,100 lbs
Max. pull, leader on ground 88,200 lbs
Max. torque 206,00 lbf-ft The operating weight includes the basic machine LB 28 (with rotary
and Kelly bar MD 28/3/30) and 33,730 lbs counterweight.
Stepless lead inclination
Lateral inclination ± °
Forward inclination °
Backward inclination 1°

4 LB 28

LB28_englisch_usa.indd 4 10.03.2008 11:41:48

 Technical description

 Engine  Control
Power rating according to ISO 9249, 350 kW (469 hp) at 1900 rpm The control system – developed and manufactured by Liebherr – is
Engine type    Liebherr D 846 A7 designed to withstand extreme temperatures and the many heavy–duty
Fuel tank    185 gal capacity with continuous level construction tasks for which this machine has been designed. Complete
    indicator and reserve warning machine operating data are displayed on a high resolution monitor
Engine complies with NRMM exhaust certification EPA/CARB Tier 3 and screen. A GSM modem allows for remote inquiry of machine data
97/68 EC Stage III. and error indications. To ensure clarity of the information on display,
different levels of data are shown in enlarged lettering and symbols.
Control and monitoring of the sensors are also handled by this high
technology system. Error indications are automatically displayed on the
monitor in clear text. The machine is equipped with proportional control
for all movements, which can be carried out simultaneously.
Two joysticks are required for operation. Pedal control can be changed
 Hydraulic system to hand control.
Options :
The main pumps are operated by a distributor gearbox. Axial piston PDE : Process data recording
displacement pumps work in open circuits supplying oil only when
needed (flow control on demand).
The hydraulic pressure peaks are absorbed by the integrated automatic
pressure compensation, which relieves the pump and saves fuel.
 Kelly winch with freewheeling
Pumps for working tools    2x 92 gal/min
Line pull (effective)   56,200 lbf
Separate pump for kinematics    47.5 gal/min
Rope diameter    34 mm
Hydraulic oil tank    211 gal
Max. line speed    0-259 ft/min
Max. working pressure   5076 PSI

The cleaning of the hydraulic oils occurs via an electronically monitored

pressure and return filter.
Any clogging is shown on the display in the cab.  Auxiliary winch
The use of synthetic environmentally friendly oil is also possible.
Line pull (effective)    22,480 lbf
Rope diameter    20 mm
Drum diameter    15,7 inch
Max. line speed    0-321 ft/min

 Crawlers
Propulsion through axial piston motor, hydraulically released spring  Rope crowd system
loaded multi–disc brake, maintenance free crawler tracks, hydraulic
Crowd force  push/pull    90,000/90,000 lbf
chain tensioning device.
Line pull (effective)    45,000 lbf
Rope diameter    28 mm
Drive speed    0 – 1.18 mph
Travel of working tool    60 ft
Track force    140,000 lbf
Max. line speed    0-243 ft/min
Width of 3-web track shoes    35,4 inch
The winches are noted for compact, easily mounted design.
Propulsion is via a maintenance-free planetary gearbox in oil bath.
Load support by the hydraulic system; additional safety factor by
a spring–loaded, multi–disc holding brake. All line pull values are
effective values. The efficiency factor of approx. 25% has already been
deducted.
 Swing
Consists of triple-row roller bearing with external teeth and two swing
drives, fixed axial piston hydraulic motor, spring loaded and hydraulically  Noise emission
released multi–disc holding brake, planetary gearbox and pinion.
Selector for 3 speed ranges to increase swing precision. Noise emissions correspond with 2000/14/EC directive on noise
Swing speed from 0 – 2 rpm is continuously variable. emission by equipment used outdoors.

LB 28  

LB28_englisch_usa.indd 5 10.03.2008 11:41:49

 Rotary BA 280 with shock absorber

Gearbox frame

Drive motors

Kelly bar

Shock absorber

Gearbox

Cardanic joint

Casing driver

• 2-stage-gear drive for flexible adaptation to soil conditions

BA280 • Due to stepless speed control via joystick optimum and precise
206,500 Gear 1 alignment and rock drilling is possible even at low speed levels; it is
184,400 Gear 2 not required to preselect an operating mode
Torque [lbf-ft]

147,500 • Kelly shock absorber and rubber bearing relieve the material and
108,400 reduce noise emission
73,800 • Thanks to the Kelly shock absorber the Kelly bar is guided at greater
37,000 length
• Various drive adapters provide compatibility with other systems
0 9 17 31 40 50 60 70
Speed [rpm]

6 LB 28

LB28_englisch_usa.indd 6 10.03.2008 11:41:59

 Kelly drilling

1900

Display for Kelly drilling

Technical data Kelly bars

Drilling drive - torque 1st gear 206,00 lbf-ft Drilling
A X Weight Kelly Ø
depth
Drilling drive - speed 1st gear 31 rpm
(ft) (ft) (ft) (lbs) (inch)
Drilling drive - torque 2nd gear 108,400 lbf-ft
MD 28/3/24 32.4 37.4 73. 11,00 16.
Drilling drive - speed 2nd gear 60 rpm MD 28/3/30 39.0 30.8 93.2 13,000 16.
MD 28/3/36 4. 24.3 112.9 1,000 16.
MD 28/4/42 42. 27.2 132. 17,900 16.
Performance data MD 28/4/48 47.4 22.3 12.2 19,80 16.
Max. drilling diameter* 6.2 ft uncased
MD 28/4/4 2.3 17.4 171.9 22,00 16.
Max. drilling diameter* 4.9 ft cased
*MD 28/4/60 7.3 12. 191.6 24,00 16.
*MD 28/4/66 62.2 7. 211.3 27,10 16.
*) Other drilling diameters available on request.
*MD 28/4/72 67.1 2.6 231.0 30,000 16.
Other Kelly bars available on request.
When using a casing oscillator, value X has to be reduced by 4.9 ft. *) Only possible with specially adapted drilling rig

LB 28 7

LB28_englisch_usa.indd 7 10.03.2008 11:42:08

 Continuous flight auger drilling

Auger with auger guide

Display for continuous flight auger drilling

Technical data Performance data

Drilling drive - torque 1 gear
st
206,00 lbf-ft Drilling depth with 26.2 ft Kelly extension,
without auger cleaner 8.3 ft
Drilling drive - speed 1 gear
st
31 rpm
Drilling depth without auger cleaner 60.7 ft
Drilling drive - torque 2nd gear 108,400 lbf-ft
Drilling depth with auger cleaner .8 ft
Drilling drive - speed 2nd gear 60 rpm
Max. pull force (crowd winch and Kelly winch) 198,00 lbs
Max. push force (weight of rotary and auger to be added) 44,100 lbs
Max. drilling diameter* 3.3 ft

*) Other drilling diameters available on request

8 LB 28

LB28_englisch_usa.indd 8 10.03.2008 11:42:19

 Double rotary drilling
Model DBA 300

Display for double rotary drilling

Technical data
Drilling drive I - torque 221,300 lbf-ft
Drilling drive I - speed 26 rpm
Drilling drive II - torque 110,60 lbf-ft
Drilling drive II - speed 31 rpm
Max. drilling diameter* 47,3 inch
Max. drilling depth 60.7 ft
Max. pull force 198,00 lbs

*) Other drilling diameters available on request

LB 28 9

LB28_englisch_usa.indd 9 10.03.2008 11:42:28

 Twin mix equipment
Model DMA 35

Display for soil mixing

Technical data
Drilling drive - torque 1st gear 2,800 lbf-ft
2nd gear 12,900 lbf-ft
Drilling drive - speed 1st gear 60 rpm
2nd gear 120 rpm
Max. drilling depth 60.7 ft
Max. diameter* 27.6 inch

*) Other diameters available on request

10 LB 28

LB28_englisch_usa.indd 10 10.03.2008 11:42:36

 PDE - Process data recording (Additional equipment)
This module constantly calculates and stores the current working processes.

Measurements PDE - diagram

Measurements are constantly calculated during the working process.
No special measuring process is required. External systems can also
be connected to the system.

Display of measurement data

Measurement data relevant to the working process is displayed on the
monitor in the cab.
The operator can then control the process and, if necessary, correct it.

Working process interruption

The working process and the measurement can be interrupted at any
time.
The measurements are automatically continued upon resumption of
work.

External sensors

Example of a protocol (in required language)

Storage of measurement and
machine data
All data is stored on a memory card. This can be read via a PC.
Thereby an evaluation and processing of data can also be performed
at a later time. For example, for:

• client certifications
• conveying daily production data, down time, etc.
• Soil condition report

Printing data
A protocol can be printed out from the cab printer after each working
process.

Data transmission
A GSM modem can be connected to the PDE making long distance
data transmission possible.

LB 28 11

LB28_englisch_usa.indd 11 10.03.2008 11:42:40

 LB 28 – 10446926 – 02/2008 Subject to change without notice.

Liebherr Nenzing Crane Co.

7075 Bennington Street
Houston, TX 77028-5812
Tel.: (713) 636-4050, Fax: (713) 636-4051
crawler.crane@liebherr.com
www.liebherr.com

LB28_englisch_usa.indd 12 10.03.2008 11:42:40