Absolute encoders – multiturn

Large hollow shaft AX Hollow shaft ø 16 mm ... 45 mm

The absolute encoder AX can be mounted on shafts from ø 16 mm

up to max. ø 45 mm. It can be combined with the proven Kübler
Sendix encoders with absolute interface.

RoHS

Robust Flexible
• Decoupling of hollow shaft and encoder. • Can be combined with all ø 58 mm solid shaft encoders.
• Solid housing. • Various variants for clamping ring attachment.
• Prove torque stop. • Three different torque stop lengths.

Order code 8 . A X X X . XX X X . XXXX

a b c d e f g

a Clamping ring c Through hollow shaft d Encoder used e Output circuit

1 = on the encoder side 9 = ø 5/8“ 1 = Sendix M5861
M depends on the encoder used *)
2 = on the torque stop side 1 = ø 16 mm [0.63“] F3 = Sendix F5863
2 = ø 20 mm [0.79“] F8 = Sendix F5868 f Type of connection
b Torque stop 4 = ø 24 mm [0.94“] 68 = Sendix 5868 depends on the encoder used *)
2 = with fastening arm 70 mm [2.76“] 5 = ø 25 mm [0.98“]
4 = with fastening arm 100 mm [3.93“] 6 = ø 1“ g Others
6 = with fastening arm 150 mm [5.91“] 7 = ø 28 mm [1.10“] depends on the encoder used *)
8 = ø 30 mm [1.18“]
A = ø 38 mm [1.50“] *) Standard variants see below.
D = ø 42 mm [1.65“] Further variants see encoder data sheets.
C = ø 45 mm [1.77“]

Recommended standard variants (with absolute encoder)

Order no. Mounted encoder Interface Power Type of connection Resolution / Protocol Option
supply

8.Axxx.M134.3412 Sendix M5861 (8.M5861.3534.3412) Analog, 10 ... 30 V DC 1 x radial M12 connector 12 bit / 4 ... 20 mA scalable without limit
4 ... 20 mA switch function
8.Axxx.M144.4412 Sendix M5861 (8.M5861.3544.4412) Analog, 15 ... 30 V DC 1 x radial M12 connector 12 bit / 0 ... 10 V scalable without limit
0 ... 10 V switch function
8.Axxx.F324.G323 Sendix F5863 (8.F5863.1224.G323) SSI 10 ... 30 V DC 1 x radial M23 connector 13 bit ST + 12 bit MT/SSI-Gray-Code SET button + status LED
8.Axxx.F8AN.A222 Sendix F5868 (8.F5868.12AN.A222) Ethernet/IP 10 ... 30 V DC 3 x axial M12 connector Ethernet/IP -
8.Axxx.F82F.2123 Sendix F5868 (8.F5868.122F.2123) CANopen 10 ... 30 V DC 2 x radial M12 connector CANopen encoder profile DS406 V3.2 SET button
8.Axxx.F86E.6112 Sendix F5868 (8.F5868.126E.6112) Modbus 10 ... 30 V DC 1 x radial M12 connector Modbus RTU application protocol V1.1b3 -
8.Axxx.6832.3113 Sendix 5868 (8.5868.1232.3113) Profibus 10 ... 30 V DC 3 x radial M12 connector PROFIBUS DP V0 encoder profile Class 2 SET button
8.Axxx.68B2.B212 Sendix 5868 (8.5868.12B2.B212) EtherCAT 10 ... 30 V DC 3 x radial M12 connector EtherCAT mit CoE 3.2.10 -
8.Axxx.68C2.C212 Sendix 5868 (8.5868.12C2.C212) PROFINET IO 10 ... 30 V DC 3 x radial M12 connector PROFINET encoder profile version 4.1 -

© Fritz Kübler GmbH, subject to errors and changes. 05/2019 www.kuebler.com 467
 Absolute encoders – multiturn

Large hollow shaft AX Hollow shaft ø 16 mm ... 45 mm

Technical data

Mechanical characteristics Electrical characteristics / Terminal assignment

Maximum speed 25°C [77°F] 2500 min-1 The electrical characteristics and the connection can be found in the data
(continuous operation) 40°C [104°F] 1750 min-1 sheets of the relevant encoder.
55°C [131°F] 1000 min-1
70°C [158°F] 250 min-1
Maximum speed 25°C [77°F] 4500 min-1
(short-term operation) 1) 40°C [104°F] 3250 min-1
55°C [131°F] 2000 min-1
70°C [158°F] 750 min-1
Starting torque at 23°C [73.4°F] max. 0.15 Nm
Weight approx. 3.5 kg [105.8 oz]
Protection acc. to EN 60529/DIN 40050-9 IP64
Material housing Aluminum
shaft stainless steel

Dimensions
Dimensions in mm [inch]
Version 8.A1 Version 8.A2
Klemmung Klemmung
Version 8.A1 geberseitig Version 8.A2
befestigungsarm seitig
Clamping ring on the encoder side Clamping ring on the torque stop side
(fastening arm)

69,2 2,72 69,4 2,73

11,3 0,44 11,6 0,46 91,5 3,6

1
63 2,48

H7
F6

93,5 3,68
63 2,48

1,42

0,39
D

F6

H7

174 6,85
36

10

4 0,16
15,6 0,61
4 0,16

70 2,74
A 15,5 0,61
5 ,9 1

8 0,31 8 0,31
150

94
3,
1 00

1 Recommended torque for D Fit

clamping ring with M3 (1,0 Nm) with hollow shaft ≥ ø 38 mm 5/8“ H7
clamping ring with M4 (2,0 Nm) with hollow shaft ≤ ø 30 mm 16 [0.63] H7
A Dimension A depends on the encoder used 20 [0.79] H7
24 [0.94] H7
25 [0.98] H7
1“ H7
28 [1.10] H7
30 [1.18] H7
D Passung 38 [1.50] H7
wendeten 16[0.63] H7 42 [1.65] H7
1) 50% duty cycle, switch-on time max. 520[0.79]
min. H7 45 [1.77] H7

24[0.94] H7 8.A12X 8.A22

468 www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 05/2019
25[.98] H7
ment für 8.A14X 8.A24
28[1.10] H7