Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • TFM SNT Level 2 Course

    Uploaded by

    richard ortega
    40 views1 page
    Total Focusing Method (TFM) is an advanced ultrasonic testing technique that combines full matrix capture data acquisition with TFM data reconstruction to improve resolution and depth of field over conventional ultrasonic testing. The course provides 80 hours of training over 10 days to educate inspectors on TFM methodologies, including both theoretical and hands-on practical components covering data collection, imaging, calibration, and defect identification in accordance with industry standards. Candidates must hold an UT Level 2 certification in welds with ideally some experience in phased array ultrasonic testing.

    Original Description:

    Original Title

    TFM-SNT-Level-2-Course

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    Total Focusing Method (TFM) is an advanced ultrasonic testing technique that combines full matrix capture data acquisition with TFM data reconstruction to improve resolution and depth of field over conventional ultrasonic testing. The course provides 80 hours of training over 10 days to educate inspectors on TFM methodologies, including both theoretical and hands-on practical components covering data collection, imaging, calibration, and defect identification in accordance with industry standards. Candidates must hold an UT Level 2 certification in welds with ideally some experience in phased array ultrasonic testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    40 views1 page

    TFM SNT Level 2 Course

    Uploaded by

    richard ortega
    Total Focusing Method (TFM) is an advanced ultrasonic testing technique that combines full matrix capture data acquisition with TFM data reconstruction to improve resolution and depth of field over conventional ultrasonic testing. The course provides 80 hours of training over 10 days to educate inspectors on TFM methodologies, including both theoretical and hands-on practical components covering data collection, imaging, calibration, and defect identification in accordance with industry standards. Candidates must hold an UT Level 2 certification in welds with ideally some experience in phased array ultrasonic testing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    TOTAL FOCUSING METHOD

    (TFM)
    COURSE CONTENT
    Total Focusing Method (TFM) is an examination technique involving the combination of classic Full Matrix Capture
    (FMC) data acquisition and TFM data reconstruction. The method has capabilities of improved resolution and depth
    of field over a larger region with less scattering of sound waves from material noise.

    Our TFM course is designed to educate advanced inspectors in the methodologies and techniques to accurately
    identify and interpret defects in challenging inspections. The course syllabus has been written in accordance with
    ASME Section V and 2020 SNT-TC-1A.

    COURSE OUTLINE
    The course will cover the theoretical understanding of TFM
    in addition to hands-on testing using the latest technology
    equipment, such as the M2M GEKKO and the Omniscan X3.

    □ Overview of PAUT and FMC data collection

    □ Beam forming and resolution

    □ Amplitude fidelity, interface/dead zones and calibration


    □ Sensitivity correction
    □ FMC characteristics
    □ Plane Wave Imaging (PWI)
    □ Understanding the various modes used in TFM

    □ Evaluation and examination including display settings,


    flaw characterisation, flaw dimensioning and software
    tools

    □ Weld and corrosion examinations

    □ Advantages and disadvantages of the method

    □ Hands on practical testing on a wide range of samples

    COST & DURATION COURSE DATES

    80 hours over 10 days (9 days training & 1 day examination covering 12 - 23 July, 2021 Rotherham, UK
    both theory and practical). August 23 - September 3, 2021 Houston, TX
    UK: £3402 plus VAT USA: $4208
    CONTACT US
    PRE REQUISITE USA School: T: 1-281-984-7023
    E: james@lavender-ndt.com
    To be eligible for this course candidates must hold UT Level 2
    Welds PCN or SNT certification. Ideally candidates will have an UK School: T: +44 (0) 1226 765769
    understanding of PAUT. E: enquiries@lavender-ndt.com
    L AV E N D E R I N T E R N AT I O N A L - Q UA L I T Y , FL E XI BI L I T Y & T R U S T

    You might also like