2.

2
Modular
connector systems

20 mm 16 mm

profile

U.V. side

20mm
16mm
600mm U.V. side

PRODUCTION STANDARDS DESCRIPTION

Modular system
of bi-protected Thickness
Structure
20mm | 16mm
6 walls
arcoPlus®626 reversò and arco-
Plus®6166 reversò are modular sys-
multiwall Effective modular width 600mm
tems of coextruded six-wall polycar-
polycarbonate for Panel length
Colours available
no limit
see page 11 bonate panels with a thickness of
translucent roofing 20mm and 16mm.
These are fixed to the existing struc-
applications TECHNICAL FEATURES ture using specific anchor brackets.
Thermal insulation 1,7 W/m2K | 1,8 W/m2K The panels are joined together by a
Acoustic insulation 20 dB
protected polycarbonate cover plate
Linear thermal expansion 0,065mm/m°C
light management Temperature range -40°C +120 °C
assembled using a click-on system,
U.V. rays protection 2 sides Coextrusion or by an aluminium connector, for a
Fire reaction EN 13501 EuroClass B-s1,d0 perfectly watertight seal.
product available
with ir and ar treatment

ADVANTAGES

❖❖ Easy and low-cost installation

❖❖ Light transmission
❖❖ Resistance to U.V. rays
and to hail

❖❖ Heat insulation
❖❖ Bendability R.min=2,5m

APPLICATIONS

Roofing

Curved roofing

Vertical windows

14 gallina.it info@gallina.it
FLAT SYSTEM
LOAD RESISTANCE
Maximum loads on two supports
Values below refer to product installed according to the Technical Handbook Recommendation
3,50
distance between supports (m)

3,00
Code 4310
AL connector
2,50
Code 2146
Covergasket in polycarbonate
2,00

1,50

1,00

0,50
50 100 150 200 250 300 350 400
Load (daN/m2)

Maximum loads on more supports

Values below refer to product installed according to the Technical Handbook Recommendation
3,50
distance between supports (m)

3,00
Code 4310
AL connector
2,50
Code 2146
Covergasket in polycarbonate
2,00

1,50

1,00

0,50
50 100 150 200 250 300 350 400
Load (daN/m2)

System with aluminium System with polycarbonate

connector Code 4310 covergasket code 2146

EASY AND LOW-COST

INSTALLATION
To ensure compliance with snow load tapping screws (on metal structures)
and negative wind load resistance re- and tap bolts (for wooden structures).
quirements, anchor brackets should be These screws and bolts are not sup-
fitted for each purlin. plied.
The polycarbonate panels are fastened Different connector profiles can be
to the underlying structure using specific used, depending on the required
brackets, which must be anchored to the load specifications.
purlins using suitable self-drilling/self-

15
COMPLETE
ROOFING SYSTEM
DETAIL
Modular multiwall polycarbonate panels Fitting connector with screw
for the construction of flat or curved roof-
ing. The panels are anchored to the sup-
Connector
porting structure using specific alumini-
Eclypse
um brackets to guarantee load strength.
Screw
Depending on the load capacity values
required, or the distance between the Plate

purlins of the underlying structures, ei- Panel

ther polycarbonate cover plates can be
used or, for greater strength, aluminium
connectors.
AL plate
COD.4310

Detail of start profile Detail of end profile

Start profile with panel, cover plate, plate and air cell Detail of insertion of section-breaker profile to
cover profiles complete roofing

Continuous roofing
Construction of continuous transparent roofing,
using polycarbonate cover plate

16 info@gallina.it
AccessoriES METAL PROFILES AccessoriES
4303
The arcoPlus® system includes a com- code 4310
Covergasket
plete range of accessories to facilitate Connector AL stopper
profile with screw
installation.
The air cells of the panels must be sea- 2146
Covergasket
led using a specific polycarbonate pro- in polycarbonate
file or vented aluminium breather tape.
code 4271
This allows correct ventilation and pre- Base-side AL profile
2282
with frontal opening
vents soiling on the inside. Double connector
in polycarbonate

2179
Start profile
in polycarbonate

code 4252 2180

10
Closing End profile
support in AL in polycarbonate
72

4310
Connector AL
profile with screw

4271
Base-side AL profile
with frontal opening

4252
Closing
support in AL

4319/200
AL eclypse
DETAIL OF ANCHORAGE for connector
Profiles anchored to supporting structures using
aluminium plates
4329 4328
Sealing tape PE-LD AL plate
4x15mm

4316 M6 nut 4264

4315 M6 x 20 screw Stainless steel plate
Accessories for connector for vertical connection

2182 4263
Block cover
Stainless steel plate
for flat connection

4327 4213 dim. 40x35x580

Additional tape
4221 dim. 70x40x580
Pad PE-LD

CONNECTOR JOINT
4678/600 th.20mm 4318
AL connector profiles with eclypse Block cover AL 20 Pad PE-LD
Reverso for connector

gallina.it 17