Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 210 views

    Malthoid 5 Ply

    Uploaded by

    Nithasha Jeewan
    Malthoid 5 ply is an asphaltic waterproofing membrane used for damp-proof courses, flat roof waterproofing, underlayment of timber decks, and protection of torch-on waterproofing membranes. It is supplied in 20m by 900mm rolls and has a thickness of 2.8mm. The membrane has high puncture resistance, is easy to apply, and provides rot protection at an economical price. It requires priming of surfaces with bituprime adhesive and can be installed by either hot or cold bonding methods.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Malthoid 5 Ply

    Uploaded by

    Nithasha Jeewan
    210 views2 pages
    Malthoid 5 ply is an asphaltic waterproofing membrane used for damp-proof courses, flat roof waterproofing, underlayment of timber decks, and protection of torch-on waterproofing membranes. It is supplied in 20m by 900mm rolls and has a thickness of 2.8mm. The membrane has high puncture resistance, is easy to apply, and provides rot protection at an economical price. It requires priming of surfaces with bituprime adhesive and can be installed by either hot or cold bonding methods.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Malthoid 5 ply is an asphaltic waterproofing membrane used for damp-proof courses, flat roof waterproofing, underlayment of timber decks, and protection of torch-on waterproofing membranes. It is supplied in 20m by 900mm rolls and has a thickness of 2.8mm. The membrane has high puncture resistance, is easy to apply, and provides rot protection at an economical price. It requires priming of surfaces with bituprime adhesive and can be installed by either hot or cold bonding methods.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    210 views2 pages

    Malthoid 5 Ply

    Uploaded by

    Nithasha Jeewan
    Malthoid 5 ply is an asphaltic waterproofing membrane used for damp-proof courses, flat roof waterproofing, underlayment of timber decks, and protection of torch-on waterproofing membranes. It is supplied in 20m by 900mm rolls and has a thickness of 2.8mm. The membrane has high puncture resistance, is easy to apply, and provides rot protection at an economical price. It requires priming of surfaces with bituprime adhesive and can be installed by either hot or cold bonding methods.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    T E C H N I C A L D ATA S H E E T

    malthoid 5 ply
    Waterproofing membrane
    DESCRIPTION
    malthoid 5 ply is an asphaltic waterproofing membrane with a fibre felt carrier. Adhesive: bitugrip. Coating: silvakote. The waterproofing system/DPC shall be malthoid 5 ply, an asphaltic waterproofing membrane with a fibre felt carrier applied in accordance with the recommendations of abe Construction Chemicals, including bituprime and bitugrip where necessary. TYPICAL PHYSICAL PROPERTIES Length of roll Mass of roll (900 mm wide) Mass of 20 m roll Mass/m Thickness (nominal) Pliability @ 25 C
    o

    20 m 55 kg 55 kg 3,05 kg/m 2,8 mm No crack on 25 mm mandrel No crack on 75 mm mandrel Fine washed sand
    o

    USES
    Brickwork damp-proof course (DPC): Flat roof waterproofing where an asphaltic membrane may be used. In accordance with SABS Code of Practice 021/1973 using either hot or cold bonding methods. As an underlay on timber decks. As a protection layer over abe Index torch on waterproofing membranes prior to the application of screeds and tiles.

    PACKAGING
    malthoid 5 ply is supplied in 20 m x 900 mm rolls.

    Pliability @ 10 C Surface finish Heat test @ 80 C

    HANDLING & STORAGE


    This product has a shelf life of 24 months if kept in a dry cool place in the original packaging. In more extreme conditions this period might be shortened.

    No slump

    FEATURES & BENEFITS


    High resistance to puncture. Easy to apply. Protection of torch on membranes. Rot proof. Economical

    CAUTION CLEANING
    Tools, brushes and mixing equipment should be cleaned immediately after use and before material has set with abe super brush cleaner followed by washing with soap and water. Do not use on completely flat roofs. Minimum falls 2% or 1:50. Stack full rolls on end not more than 1,8m high.

    SURFACE PREPARATION
    All surfaces to be clean, dry, sound and free from sharp protrusions.

    HEALTH & SAFETY


    Refer to material safety data sheet for further information.

    BONDING / PRIMING
    Prime concrete surfaces with abe bituprime and allow to dry. Use abe bitugrip as an adhesive to bond malthoid 5 ply to primed concrete.

    PROTECTION ON COMPLETION
    Allow malthoid 5 ply to weather for six weeks before overcoating with abe silvakote for protection against UV rays.

    IMPORTANT NOTE
    This data sheet is issued as a guide to the use of the product(s) concerned. Whilst abe Construction Chemicals endeavours to ensure that any advice, recommendation, specification or information is accurate and correct, the company cannot - because abe has no direct or continuous control over where and how abe products are applied accept any liability either directly or indirectly arising from the use of abe products, whether or not in accordance with any advice, specification, recommendation, or information given by the company.

    COVERAGE
    Fully dependent on the type of application.

    TEMPERATURE AND RELATIVE HUMIDITY


    Care must be taken when unrolling malthoid if the temperature is o below 5 C.

    APPLICATION
    Tear off paper wrapper and merely roll out product on surface. Use sharp knife to cut to required length. Overlaps: 75 mm side laps and 100 mm end laps.

    MODEL SPECIFICATION
    Two or three layer waterproof system. DPC in brickwork or under floor screeds. Primer: bituprime.

    a.b.e. is an ISO 9001 : 2000 Registered Company.

    9240SERIES Rev: 01-05-08

    a.b.e. Construction Chemicals Limited

    P.O. Box 23053, Isipingo, 4110

    7 Wilcox Road, Isipingo, 4133

    Tel. (031) 913 5400

    T E C H N I C A L D ATA S H E E T

    FURTHER INFORMATION
    Where other products are to be used in conjunction with this material, the relevant technical data sheets should be consulted to determine total requirements. abe Construction Chemicals has a wealth of technical and practical experience built up over years in the companys pursuit of excellence in building and construction technology.

    a.b.e. is an ISO 9001 : 2000 Registered Company.

    9240SERIES Rev: 01-05-08

    a.b.e. Construction Chemicals Limited

    P.O. Box 23053, Isipingo, 4110

    7 Wilcox Road, Isipingo, 4133

    Tel. (031) 913 5400

    You might also like