Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

350 501 Demo

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

Vendor:Cisco

Exam Code:350-501

Exam Name:Implementing and Operating Cisco


Service Provider Network Core Technologies (SPCOR)

Version:Demo
QUESTION 1

When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not taking the expected
path in the core.

Which command do you use to quickly check path of a TE tunnel?

A. Traceroute mpls ipv4 -tunnel destination

B. Ping

C. show mpls traffic-engineering tunnels

D. traceroute

Correct Answer: A

QUESTION 2

Egress PE NAT is being used via a single centralized router to provide Internet access to L3VPN customers. Which
description of the NAT operation is true?

A. The NAT table contains a field to identify the inside VRF of a translation.

B. Multiple address pools are needed for the same L3VPN because each site has a separate NAT.

C. The different L3VPNs using the Internet access must not have IP overlaps internally.

D. Users in different VRFs cannot share the same outside global IP address.

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/112084-ios-nat-mpls-
vpn-00.html

QUESTION 3

Refer to the exhibit.


What is the effect of this configuration?

A. R1 supports a graceful restart operation on the peer, even if graceful restart is disabled on the peer.

B. R1 supports a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.

C. R1 failovers only to a peer that is configured for LDP SSO/NSF.

D. R1 failovers to any peer.

Correct Answer: B

QUESTION 4

What do Ansible and SaltStack have in common?

A. They both have agents running on the client machine.

B. They both can be designed with more than one master server.

C. They both use DSL configuration language.

D. They both use YAML configuration language.

Correct Answer: B

Reference: https://www.edureka.co/blog/chef-vs-puppet-vs-ansible-vs-saltstack/

QUESTION 5

Which type of multicast distribution trees can RSVP-TE-based multicast build?


A. only branches of point-to-point tunnels

B. multipoint-to-multipoint multicast from tail-end to head-end full mesh

C. point-to-multipoint multicast distribution trees

D. point-to-multipoint trees from tail-end to head-end

E. multipoint-to-multipoint multicast distribution trees

Correct Answer: D

QUESTION 6

Refer to the exhibit.

An engineer needs to implement this QoS policy on customer\\'s network due to ongoing slow network issues.

What will be the effect on the network when the engineer implements this configuration?

A. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it
enters the pos0/2/0/0 interface.

B. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the
pos0/2/0/0 interface.

C. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it
exits the pos0/2/0/0 interface.

D. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the poso/2/0/0
interface.

Correct Answer: D

QUESTION 7

Refer to the exhibit.


Customer Y reported that internet traffic stopped for a few minute. The ISP ABC operation engineer identified that this
occurred when ASBR1 router reloaded OSPF coverage faster than BGP. Which command prevent this happening?

A. Graceful restart

B. set-overload-bit on startup wait-for-bgp

C. bfd min_rx 100 max_rx 100 multiplier 3

D. max-metric router-lsa on startup 300

Correct Answer: D

QUESTION 8

Which statement about Network Services Orchestrator (NSO) is true?

A. It must use SDN as an overlay for addressing.

B. It uses YANG modeling language to automate devices.

C. It is used only in service provider environments.

D. It can be used only with XML coding.

Correct Answer: B
QUESTION 9

Refer to the exhibit.

Which show command shows statistics for the control plane policy and is used to troubleshoot?

A. show control-plane CoPP

B. show policy control-plane

C. show control-plane

D. show policy-map control-plane

Correct Answer: D

QUESTION 10

A network engineer is implementing a QoS policy for outbound management traffic classification and marking on a CPE
device with these requirements:

Management protocols must be marked with DSCP AF class 2 with low drop probability.

Monitoring protocols must be marked with DSCP AF class 1 with low drop probability.
All remaining traffic must be marked with a DSCP value of 0.

Which configuration must the engineer implement to satisfy the requirements?

A. policy-map cpe-mgmt-policy class management set ip dscp af21 class monitoring set ip dscp af11 class class-default

set ip dscp default

end

B. policy-map cpe-mgmt-policy class management set ip dscp af21 class monitoring set ip dscp af11

class class-default

set ip dscp af10

end

C. policy-map cpe-mgmt-policy class management set ip dscp af23 class monitoring set ip dscp af13 class class-default

set ip dscp default

end

D. policy-map cpe-mgmt-policy class management set ip dscp af23 class monitoring set ip dscp af13 class class-default

set ip dscp af0

end

Correct Answer: A

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configur
ation/guide/nexus1000v_qos/qos_6dscp_val.pdf

QUESTION 11

An engineer working for telecommunication company needs to secure the LAN network using a prefix list. Which best
practice should the engineer follow when he implements a prefix list?

A. An engineer must identify the prefix list with a number only.

B. The final entry in a prefix list must be /32.

C. An engineer must include only the prefixes for which he needs to log activity.

D. An engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.

Correct Answer: D

QUESTION 12

What is the role of NSO in network automation?


A. It is a tool used to bridge automation to the physical network infrastructure.

B. It is a GUI used to manage wireless devices in a campus infrastructure.

C. It is a type of REST API used to configure an APIC.

D. It is a tool that uses CLI only to configure virtual network devices.

Correct Answer: A

https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-services-orchestrator/datasheet-
c78-734576.html
To Read the Whole Q&As, please purchase the Complete Version from Our website.

Try our product !

100% Guaranteed Success

100% Money Back Guarantee

365 Days Free Update

Instant Download After Purchase

24x7 Customer Support

Average 99.9% Success Rate

More than 800,000 Satisfied Customers Worldwide

Multi-Platform capabilities - Windows, Mac, Android, iPhone, iPod, iPad, Kindle

Need Help
Please provide as much detail as possible so we can best assist you.
To update a previously submitted ticket:

Any charges made through this site will appear as Global Simulators Limited.
All trademarks are the property of their respective owners.

Powered by TCPDF (www.tcpdf.org)

You might also like