7MPa Concrete Blocks TDS - v2

Technical Data | Fixing Into Blockwork
United Kingdom
Trust & Innovation

www.rawlplug.co.uk 1
Technical Data Sheet | Fixing Into BlockWork
R-LX Concrete Screwbolt

in ≥100 x 215 x 440mm & ≥140 x 215 x 440mm 7MPa Solid Block
Installation Data
Socket Maximum Characteristic Edge Distance Minimum
Thread Installation Characteristic Minimum
Drill ø Size / Torx Installation Shear Edge
Diameter Depth Tension Spacing Spacing
Size Drive(1) Torque Direct Parallel Distance
d d0 Sw Tinst hnom Ccr,N Ccr,V,Ʇ Ccr,V, II Scr Cmin Smin
[mm] [mm] [mm] [Nm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
6mm 7.5 6 10 / T30 15 55 83 190 130 165 50 50
8mm 10 8 13/ T45 20 70 105 230 155 210 50 50
10mm 12.5 10 15 / T50 30 85 128 265 180 255 50 50
Torx drive only on a countersunk and pan head versions
(1)
Performance Data
Embedment Tension Resistance (kN) Shear Resistance (kN)
Drill ø
Depth
Size Characteristic Design Recommended Characteristic Design Recommended
[mm] [mm] NRk NRd Nrec VRk VRd Vrec
6mm 55 6 6.2 2.5 1.8 7.0 2.8 2.0

8mm 70 8 8.2 3.3 2.3 10.5 4.2 3.0
10mm 85 10 10.0 4.0 2.9 14.4 5.8 4.1
Reduction Factors - Edge and Spacing

Edge Tension Edge Shear towards Edge Shear Parallel to Edge Spacing Tension and Shear
[mm] 6mm 8mm 10mm [mm] 6mm 8mm 10mm 6mm 8mm 10mm [mm] 6mm 8mm 10mm
50 0.80 0.74 0.70 50 0.14 0.10 0.08 0.25 0.19 0.15 50 0.65 0.62 0.60
60 0.86 0.79 0.74 75 0.25 0.19 0.15 0.45 0.34 0.28 75 0.73 0.68 0.65
70 0.92 0.83 0.77 100 0.39 0.29 0.24 0.69 0.53 0.43 100 0.80 0.74 0.70
80 0.98 0.88 0.81 125 0.54 0.41 0.33 0.97 0.74 0.60 125 0.88 0.80 0.75
90 1.0 0.93 0.85 150 0.71 0.54 0.44 1.0 0.97 0.79 150 0.95 0.86 0.79
100 0.98 0.89 175 0.89 0.68 0.55 1.0 0.99 160 0.98 0.88 0.81
115 1.0 0.95 200 1.0 0.83 0.67 1.0 180 1.0 0.93 0.85
130 1.0 225 0.99 0.80 200 0.98 0.89
250 1.0 0.94 220 1.0 0.93
275 1.0 255 1.0
R-FF1 Frame Fixing

in ≥100 x 215 x 440mm & ≥140 x 215 x 440mm 7MPa Solid Block
Installation Data
Socket Characteristic Edge Distance Minimum
Product Installation Characteristic Minimum
Drill ø Size / Torx Shear Edge
Size Drive(1) Direct Parallel Distance
d d0 Sw hnom Ccr,N Ccr,V,Ʇ Ccr,V, II Scr Cmin Smin
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
8mm 8 8 T30 70 105 160 110 210 50 50
10mm 10 10 13 / T40 70 105 215 145 210 50 50
Performance Data
Drill ø
Depth
8mm 70 8 2.4 1.0 0.7 5.8 2.3 1.7

10mm 70 10 4.5 1.8 1.3 9.5 3.8 2.7

[mm] 8mm 10mm [mm] 8mm 10mm 8mm 10mm [mm] 8mm 10mm
50 0.74 0.74 50 0.18 0.11 0.32 0.21 50 0.62 0.62
60 0.79 0.79 60 0.23 0.15 0.42 0.27 75 0.68 0.68
70 0.83 0.83 70 0.29 0.19 0.52 0.34 100 0.74 0.74
80 0.88 0.88 80 0.36 0.23 0.64 0.42 125 0.80 0.80
90 0.93 0.93 100 0.50 0.32 0.90 0.58 150 0.86 0.86
100 0.98 0.98 125 0.70 0.45 1.0 0.82 160 0.88 0.88
105 1.0 1.0 150 0.91 0.60 1.0 180 0.93 0.93
175 1.0 0.75 200 0.98 0.98
200 0.92 210 1.0 1.0
215 1.0
R-KERII Hybrid Resin

in ≥100 x 215 x 440mm 7MPa Solid Block
Installation Data
Maximum Characteristic Edge Distance Minimum
Drill ø Installation Shear Edge
Size Torque Direct Parallel Distance
d d0 Tinst hnom Ccr,N Ccr,V,Ʇ Ccr,V, II Scr Cmin Smin
[mm] [mm] [Nm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
M8 8 10 10 80 120 210 145 240 50 50
M10 10 12 15 80 120 250 170 240 50 50
M12 12 14 20 80 120 285 195 240 50 50
Performance Data
Drill ø
Depth
M8 80 10 5.8 2.3 1.7 9.0 3.6 2.6

M10 80 12 7.8 3.1 2.2 12.4 5.0 3.5
M12 80 14 9.8 3.9 2.8 16.0 6.4 4.6

[mm] M8 M10 M12 [mm] M8 M10 M12 M8 M10 M12 [mm] M8 M10 M12
50 0.71 0.71 0.71 50 0.12 0.09 0.07 0.21 0.16 0.13 50 0.60 0.60 0.60
60 0.75 0.75 0.75 75 0.21 0.17 0.14 0.39 0.30 0.24 75 0.66 0.66 0.66
70 0.79 0.79 0.79 100 0.33 0.26 0.21 0.59 0.46 0.38 100 0.71 0.71 0.71
80 0.83 0.83 0.83 125 0.46 0.36 0.29 0.83 0.64 0.53 125 0.76 0.76 0.76
90 0.88 0.88 0.88 150 0.61 0.47 0.38 1.0 0.85 0.69 150 0.81 0.81 0.81
100 0.92 0.92 0.92 175 0.76 0.59 0.48 1.0 0.87 160 0.83 0.83 0.83
120 1.0 1.0 1.0 200 0.93 0.72 0.59 1.0 180 0.88 0.88 0.88
225 1.0 0.86 0.71 200 0.92 0.92 0.92
250 1.0 0.83 220 0.96 0.96 0.96
300 1.0 240 1.0 1.0 1.0
R-KERII Hybrid Resin

Installation Data
M8 8 10 10 80 120 210 145 240 50 50
M10 10 12 15 90 135 250 170 270 50 50
M12 12 14 20 110 165 285 195 330 50 50
Performance Data
Drill ø
Depth
M8 80 10 9.6 3.8 2.7 9.0 3.6 2.6

M10 90 12 11.1 4.4 3.2 12.4 5.0 3.5
M12 110 14 12.6 5.0 3.6 16.0 6.4 4.6

50 0.71 0.69 0.65 50 0.12 0.09 0.08 0.21 0.17 0.14 50 0.60 0.59 0.58
60 0.75 0.72 0.68 75 0.21 0.17 0.14 0.39 0.31 0.26 75 0.66 0.64 0.61
70 0.79 0.76 0.71 100 0.33 0.26 0.22 0.59 0.47 0.40 100 0.71 0.69 0.65
80 0.83 0.80 0.74 125 0.46 0.36 0.31 0.83 0.66 0.56 125 0.76 0.73 0.69
90 0.88 0.83 0.77 150 0.61 0.48 0.41 1.0 0.86 0.74 175 0.86 0.82 0.77
100 0.92 0.87 0.80 175 0.76 0.60 0.52 1.0 0.93 200 0.92 0.87 0.80
115 1.0 0.9 0.85 200 0.93 0.74 0.63 1.0 230 0.98 0.93 0.85
130 1.0 0.89 225 1.0 0.88 0.75 260 1.0 0.98 0.89
145 0.94 250 1.0 0.88 300 1.0 0.95
165 1.0 285 1.0 330 1.0
R-KEMII Styrene Free Polyester Resin

Installation Data
M8 8 10 10 80 120 190 130 240 50 50
M10 10 12 15 80 120 230 155 240 50 50
M12 12 14 20 80 120 275 185 240 50 50
Performance Data
Drill ø
Depth
M8 80 10 5.3 2.1 1.5 7.5 3.0 2.1

M10 80 12 7.1 2.8 2.0 11.0 4.4 3.1
M12 80 14 8.8 3.5 2.5 15.0 6.0 4.3

50 0.71 0.71 0.71 50 0.14 0.10 0.08 0.25 0.18 0.14 50 0.60 0.60 0.60
60 0.75 0.75 0.75 75 0.26 0.19 0.14 0.46 0.34 0.26 75 0.66 0.66 0.66
70 0.79 0.79 0.79 100 0.40 0.29 0.22 0.71 0.52 0.40 100 0.71 0.71 0.71
80 0.83 0.83 0.83 125 0.55 0.40 0.31 0.99 0.73 0.56 125 0.76 0.76 0.76
90 0.88 0.88 0.88 150 0.73 0.53 0.41 1.0 0.95 0.74 150 0.81 0.81 0.81
100 0.92 0.92 0.92 175 0.92 0.67 0.52 1.0 0.93 160 0.83 0.83 0.83
120 1.0 1.0 1.0 200 1.0 0.82 0.63 1.0 180 0.88 0.88 0.88
225 0.97 0.75 200 0.92 0.92 0.92
250 1.0 0.88 220 0.96 0.96 0.96
275 1.0 240 1.0 1.0 1.0
R-KEMII Styrene Free Polyester Resin

Installation Data
M8 8 10 10 80 120 190 130 240 50 50
M10 10 12 15 90 135 225 155 270 50 50
M12 12 14 20 110 165 275 185 330 50 50
Performance Data
Drill ø
Depth
M8 80 10 7.4 3.0 2.1 7.5 3.0 2.1

M10 90 12 9.0 3.6 2.6 11.0 4.4 3.1
M12 110 14 10.5 4.2 3.0 15.0 6.0 4.3

50 0.71 0.69 0.65 50 0.14 0.10 0.08 0.25 0.19 0.15 50 0.60 0.59 0.58
60 0.75 0.72 0.68 75 0.26 0.19 0.15 0.46 0.34 0.28 75 0.66 0.64 0.61
70 0.79 0.76 0.71 100 0.40 0.30 0.24 0.71 0.53 0.43 100 0.71 0.69 0.65
80 0.83 0.80 0.74 125 0.55 0.41 0.33 0.99 0.74 0.60 125 0.76 0.73 0.69
90 0.88 0.83 0.77 150 0.73 0.54 0.44 1.0 0.98 0.79 175 0.86 0.82 0.77
100 0.92 0.87 0.80 175 0.92 0.68 0.55 1.0 0.99 200 0.92 0.87 0.80
115 1.0 0.93 0.85 200 1.0 0.83 0.67 1.0 230 0.98 0.93 0.85
130 0.98 0.89 225 1.0 0.80 260 1.0 0.98 0.89
145 1.0 0.94 250 0.94 300 1.0 0.95
165 1.0 275 1.0 330 1.0

7MPa Concrete Blocks TDS - v2

Uploaded by

Copyright:

Available Formats

7MPa Concrete Blocks TDS - v2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

7MPa Concrete Blocks TDS - v2

Uploaded by

Copyright:

Available Formats

Technical Data | Fixing Into Blockwork

Trust & Innovation

R-LX Concrete Screwbolt

6mm 55 6 6.2 2.5 1.8 7.0 2.8 2.0

Reduction Factors - Edge and Spacing

R-FF1 Frame Fixing

8mm 70 8 2.4 1.0 0.7 5.8 2.3 1.7

Reduction Factors - Edge and Spacing

R-KERII Hybrid Resin

M8 80 10 5.8 2.3 1.7 9.0 3.6 2.6

Reduction Factors - Edge and Spacing

R-KERII Hybrid Resin

M8 80 10 9.6 3.8 2.7 9.0 3.6 2.6

Reduction Factors - Edge and Spacing

R-KEMII Styrene Free Polyester Resin

M8 80 10 5.3 2.1 1.5 7.5 3.0 2.1

Reduction Factors - Edge and Spacing

R-KEMII Styrene Free Polyester Resin

M8 80 10 7.4 3.0 2.1 7.5 3.0 2.1

Reduction Factors - Edge and Spacing

You might also like