RT-50

PRESSURE/TORQUE CONVERSION CHART

PRESSURE IN PSI FT. LBS. KGM NM PRESSURE IN BAR
1500 7875 1089 10675 104
1600 8400 1162 11387 110
1800 9450 1307 12810 124
2000 10500 1452 14234 138
2200 11550 1597 15657 152
2400 12600 1743 17081 165
2600 13650 1888 18504 179
2800 14700 2033 19927 193
3000 15750 2178 21351 207
3200 16800 2323 22774 220
3400 17850 2469 24197 234
3600 18900 2614 25621 248
®

3800 19950 2759 27044 262

® W W W. R A P I D T O R C . C O M

4000 21000 2904 28468 276

4200 22050 3050 29891 290
4400 23100 3195 31314 303
4600 24150 3340 32738 317
4800 25200 3485 34161 331
5000 26250 3630 35585 345
5200 27300 3776 37008 358
5400 28350 3921 38431 372
5600 29400 4066 39855 386
5800 30450 4211 41278 400
6000 31500 4356 42701 414
6200 32550 4502 44125 427
6400 33600 4647 45548 441
6600 34650 4792 46972 455
6800 35700 4937 48395 468
7000 36750 5083 49818 482
7200 37800 5228 51242 496
7400 38850 5373 52665 510
7600 39900 5518 54088 524
7800 40950 5663 55512 538
8000 42000 5809 56935 552
8200 43050 5954 58359 565
8400 44100 6099 59782 579
8600 45150 6244 61205 593
8800 46200 6389 62629 607
9000 47250 6535 64052 620
9200 48300 6680 65475 634
9400 49350 6825 66899 648
8

9600 50400 6970 68322 662

9800 51450 7116 69746 676
10000 52500 7261 71169 690
RAPID-TORC is an International Corporation, based in Houston, TX and Brussels, Belgium. Leader in the Bolting market, the company designs, manufactures and
distributes high quality hydraulic torque wrenches, bolt tensioners and induction heating systems and delivers value-added technical services to customers worldwide.
 1
Quick Setup
Connect your socket to your square drive. ALWAYS use
the safety connector pin and the safety ring for added
safety.

2 Make sure your hoses are free of any de-

fects. Connect hose to the corresponding
couplers on the pump and tool.

Cycle the tool. NOTE: Easy to remember tool position

3 4 for tightening and listening.

click Tightening.
click
Press
ON.
Click.
Release.
Click.

Loosening.

5 1500
1600
RT-10
PRESSURE/TORQUE CONVERSION CHART
PRESSURE IN PSI FT. LBS.
1755
1864
KGM
243
258
NM
2379
2527
PRESSURE IN BAR
104
110

Use the pressure/torque conver-

1800 2082 288 2822 124
2000 2300 318 3118 138
2200 2526 349 3424 152
2400 2752 381 3731 165
2600 2978 412 4037 179
2800 3204 443 4343 193
3000 3430 474 4650 207

sion chart to set the psi for the

3200 3656 506 4956 220
3400 3882 537 5262 234
3600 4108 568 5569 248
®

3800 4334 599 5875 262

®

4000 4560 631 6182 276

4200 4792 663 6496 290

torque value you need.

4400 5024 695 6811 303
4600 5256 727 7125 317
4800 5488 759 7440 331
5000 5720 791 7754 345
5200 5948 823 8063 358
5400 6176 854 8372 372
5600 6404 886 8681 386

NOTE: Only use the chart that

5800 6632 917 8990 400
6000 6860 949 9299 414
6200 7094 981 9617 427
6400 7328 1013 9934 441
6600 7562 1046 10251 455
6800 7796 1078 10568 468

corresponds to the tool you are Turn the T-handle to

7000 8030 1111 10885 482
7200 8264 1143 11203 496
7400 8498 1175 11520 510
7600 8732 1208 11837 524
7800 8966 1240 12154 538
8000 9200 1272 12472 552
8200 9432 1304 12786 565

using. the right to set the

8400 9664 1337 13101 579
8600 9896 1369 13415 593
8800 10128 1401 13730 607
9000 10360 1433 14044 620
9200 10592 1465 14359 634
9400 10824 1497 14673 648

pressure.
9600 11056 1529 14988 662
9800 11288 1561 15302 676
10000 11520 1593 15617 690
RAPID-TORC is an International Corporation, based in Houston, TX and Brussels, Belgium. Leader in the Bolting market, the company designs, manufactures and
distributes high quality hydraulic torque wrenches, bolt tensioners and induction heating systems and delivers value-added technical services to customers worldwide.
.

WARNING:
NEVER PLACE HANDS NEAR ACTION OR REACTION POINTS.
ALWAYS WEAR HARD HAT, SAFETY GLOVES, GOGGLES, STEELTOE BOOTS AND EARPLUGS
THE PUMP AND THE TOOL SHOULD BE OPERATED BY THE SAME PERSON.