Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PowerLogic PM200 - PM210MG

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product datasheet

Specifications

PM210 power meter unit with


backlite green LCD display
PM210MG

Discontinued on: 01 November 2020

Discontinued

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Price : 188,724.80 NGN

Main
Range of product PowerLogic PM200

Device short name PM200

Product or component type Power meter

Complementary
Power quality analysis Up to the 15th harmonic

Type of measurement Frequency


Power factor total
Apparent power total
Active power total
Reactive power total
Current per phase
Voltage per phase
Energy total

Supply voltage 125...250 V DC


100...415 V AC 50/60 Hz

Network frequency 50/60 Hz

Maximum power consumption in 5 VA


VA

Display type Backlit LCD

Display resolution 6 lines

Sampling rate 32 samples/cycle

Measurement current 5 A


1 A

Input type Current 0.01...6 A (impedance <= 0.12 Ohm)

Measurement voltage 10…480 V AC 45...65 Hz phase to phase


10…277 V AC 45...65 Hz phase to neutral

Measurement accuracy Power 1 %


Current 0.5 % 1...6 A
Voltage 0.5 % 50...227 V
Frequency 0.02 Hz 45...65 Hz

Accuracy class Class 1 active energy conforming to IEC 62053-21

Communication port protocol Modbus 19.2 kbauds

Communication port support RS485

Jan 19, 2023 1


Environment
Electromagnetic compatibility Limits for harmonic current emissions: , conforming to IEC 61000-3-2
Conducted and radiated emissions: , conforming to EN 55011 class A
Electrostatic discharge immunity test: , class III, conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields: , class III, conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test: , class III, conforming to IEC 61000-4-4
1.2/50 µs shock waves immunity test: , class III, conforming to IEC 61000-4-5
Conducted RF disturbances: , class III, conforming to IEC 61000-4-6
Immunity to impulse waves: , class III, conforming to IEC 61000-4-8
Immunity to microbreaks and voltage drops: , class III, conforming to IEC 61000-4-11
Limitation of voltage changes, voltage fluctuations and flicker in low-voltage: , conforming to IEC
61000-3-3

Mounting mode Flush-mounted

Mounting support Panel

Type of installation Indoor installation

Overvoltage category III

IP degree of protection IP30 back: conforming to IEC 60529


IP52 front face: conforming to IEC 60529

Relative humidity 95 % at 50 °C

Pollution degree 2

Ambient air temperature for -5…55 °C


operation

Ambient air temperature for -40…85 °C


storage

Operating altitude 0...3000 m

Standards UL 508
IEC 61010-1

Product certifications CE
cULus

Width 96 mm

Depth 69 mm

Height 96 mm

Net weight 0.36 kg

Offer Sustainability
Sustainable offer status Green Premium product

EU RoHS Directive Compliant


EU RoHS Declaration

Contractual warranty
Warranty 18 months

Recommended replacement(s)
PM210MG is replaced by the following product range:

PowerLogic PM5000 series


High-end cost management capabilities in an affordable power meter
Products: 75

2
Jan 19, 2023

You might also like