Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 165 views

    Seam Modeling

    Uploaded by

    Alwi Wilogo
    1. The document describes the process of bore seam modelling and creating various seam models including uncut, stacked, washout, and cut seam models from borehole data. 2. It involves steps like bore seam modelling, multi-seam multi-variable gridding to create initial seam grids, computing washout grids, performing arithmetic operations to fill in missing grids, and using model build operations to stack the grids into different seam models. 3. The final output is a cut seam model with stacked, adjusted seam grids stored in the MODEL_CUT grid folder/data directory.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Seam Modeling

    Uploaded by

    Alwi Wilogo
    165 views35 pages
    1. The document describes the process of bore seam modelling and creating various seam models including uncut, stacked, washout, and cut seam models from borehole data. 2. It involves steps like bore seam modelling, multi-seam multi-variable gridding to create initial seam grids, computing washout grids, performing arithmetic operations to fill in missing grids, and using model build operations to stack the grids into different seam models. 3. The final output is a cut seam model with stacked, adjusted seam grids stored in the MODEL_CUT grid folder/data directory.

    Original Title

    03. SEAM MODELING

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes the process of bore seam modelling and creating various seam models including uncut, stacked, washout, and cut seam models from borehole data. 2. It involves steps like bore seam modelling, multi-seam multi-variable gridding to create initial seam grids, computing washout grids, performing arithmetic operations to fill in missing grids, and using model build operations to stack the grids into different seam models. 3. The final output is a cut seam model with stacked, adjusted seam grids stored in the MODEL_CUT grid folder/data directory.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    165 views35 pages

    Seam Modeling

    Uploaded by

    Alwi Wilogo
    1. The document describes the process of bore seam modelling and creating various seam models including uncut, stacked, washout, and cut seam models from borehole data. 2. It involves steps like bore seam modelling, multi-seam multi-variable gridding to create initial seam grids, computing washout grids, performing arithmetic operations to fill in missing grids, and using model build operations to stack the grids into different seam models. 3. The final output is a cut seam model with stacked, adjusted seam grids stored in the MODEL_CUT grid folder/data directory.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 35

    BORE SEAM MODELLING

    BOREHOLEDB-EXPORT-EXPORT SEAM LAYER INTERVAL (BEFORE MODELLING)


    CEK COLLAR VS TOPO
    BoreholeDB>Select Boreholes

    Untuk Mengaktifkan Close Hole Selections Buat/Edit Environmental Variable di computer system setting
    Control Panel>System>Advance>Environment Variables
    LOAD-OK

    SeamModel>Bore Seam Modelling


    NOTE : UNTUK PLY SPLITING & MERGING ATAU FATHER/SON PILIH SALAH SATU UNTUK MELAKUKAN
    PEMODELAN SEAM-SEAM BATUBARANYA

    OK

    Untuk Menghitung prosentase value diambil dari Seam-Seam Split dengan patokan perhitungan pada

    BOREHOLEDB-REPORTING-REPORT SEAM DATA (ambil data mean)


    SAVE PARAMETER FATHER/SON STAGE 1
    VALIDATE – OK

    SAVE PARAMETER FATHER/SON STAGE 1


    VALIDATE – OK
    BOREHOLEDB-REPORTING- REPORT SEAM VALIDATION

    OK
    Global : Jarak Terjauh Antar Titik Bor

    OK

    OK
    COPY BOREHOLES.B33 dan BOREHOLES.B35 Ke Folder lain untuk Gridding Seam
    Floor/BASERL pada pengoperasian selanjutnya.

    OK

    Rename BOREHOLES.B33 dan BOREHOLES.B35 pada database file menjadi


    BOREHOLES_THICK.B33 dan BOREHOLES_THICK.B35 sebagai seam pick file untuk Gridding
    Thickness/SEAMTH

    BOREHOLEDB-EXPORT-EXPORT SEAM LAYER INTERVAL (AFTER MODELLING)


    COPY Kembali BOREHOLES.B33 dan BOREHOLES.B35 Ke Folder sebelumnya

    BoreholeDB>Reporting>Report Seam Data

    SeamModel>Multi-Seam Multi-Variable Gridding


    1 2 3

    4 5

    4. Buat Gridding Params untuk FLOOR


    OK
    5. Buat Geometry Setup

    6. UPDATE LIST

    7. OK
    BOREHOLESDB>FILES>OPEN SEAM INTERVAL FILES(.B33/.B35)
    SeamModel>Multi-Seam Multi-Variable Gridding

    1 2 3
    4

    5
    OK
    CREATING BASE OF WEATHERING GRID:

    BoreholeDB>Edit>Create/Edit Seam Sequence


    Un-tick all seams code except W, then save sequence file.
    SeamModel>Multi-Seam Multi-Variable Gridding

    Add Variables-BASERL

    Select Seam (W), update list then click Ok.


    Gridding Params
    SeamModel>Seam Model Operations

    Click [Ok] tab. Verify the resulting grids in section view.


    BoreholeDB>Edit>Create/Edit Seam Sequence. Tick all seams, then save sequence file.
    CREATING THE STACKED SEAM MODEL:

    1. File>New>Folder. This will create a new grid folder/DD named MODEL_STACK.GRD in the project
    folder.

    2. Un-tick all the seams that have not been modeled in MODEL_UNCUT grid folder due to lack of
    intercepts. This will guide you in determining the lower and upper grids in stacking the seams.
    3. SeamModel>Seam Model Operations, select Strata Build operations. Then click [Ok] tab to complete
    the task.
    4. List down the first missing strata, in this case it is N1SR grid.
    5. Create this grid using grid arithmetic. N0IB=N2SF-N1SR.
    6. Grid>Arithmetic. Click Ok and save new grid to be created which is N0IB.

    Click Ok.

    7. Re-invoke model build stacking again to check for the next missing strata. In this case it is N7IB grid.
    8. Grid>Arithmetic. This will create the missing N7IB grid. Save the created grid
    9. Repeat the same process in creating grid N1OB.

    10. Re-invoke model build stacking again to check if there are still missing grids. Repeat the process if
    there is, else, investigate the model in section plots for conformity before proceeding to next
    modeling step.
    CREATING THE WASH OUT GRID (MK) IN STACKED SEAM MODEL:

    Copy Data SQL untuk Seam Wash Out


    CREATING THE WASHOUT SEAM MODEL:

    1. File>New>Folder. This will create new grid folder/DD, MODEL_WASHOUT.GRD. Click Ok.

    2. SeamModel>Compute Seam Washout Grids. This will create grids with MK suffixes in STACK seam
    model.

    3. Grid values for this MK’s are zeros and ones, the zeros are the areas with zero picks and the radius
    of influence is 200m from BH’s. Click Ok.
    4. Create wash out grid by using WASHOUT.SQL in SeamModel>Seam Model Operations. Click Ok.

    WASHOUT

    OR
    5. SeamModel>Seam Model Operations. This will create the new seam roof based on adjusted seam
    thicknesses due to washout areas.

    Click Ok to complete the task.


    CREATING THE UNCUT SEAM MODEL:

    1. File>New>Folder. This will create a new grid folder/DD named MODEL_UNCUT.GRD in the project
    folder.

    Click [Finish] tab to complete the task.

    2. SeamModel>Multi-Seam Multi-Variable Gridding. Select all Seam, create gridding parameter, update
    list then click Ok.

    Gridding Params
    Seam Model>Seam Model Operations>Arithmetic operation
    to create seam roof based on seam floor and seam thickness grids. The original seam thicknesses were
    altered due to the setting of thicknesses to zero for those interpolated picks below topography and
    above total hole depth (this was previously done in Seam Model>Bore Seam Modelling).
    OK
    CREATING THE CUT SEAM MODEL:

    1. File>New>Folder. This will create new grid folder/DD, MODEL_CUT.GRD. Click Ok.

    2. SeamModel>Seam Model Operations>Model Build.


    3. This is now your final seam grid files stored in folder/DD……MODEL_CUT.GRD.

    You might also like