Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 364 views

    White Rodgers - 1A65-641 - Install Instructions

    Uploaded by

    steveop05
    This document provides installation instructions for a White-Rodgers 1A65/1A65W electric heat thermostat. The thermostat is designed for use with electric heating systems like baseboards or wall heaters. It has a temperature range of 40-85°F and a narrow operating differential for accurate temperature control. The instructions describe how to install the thermostat in a wall electrical box, making sure not to damage the temperature sensing knob, and how to make electrical connections to control a heating system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    White Rodgers - 1A65-641 - Install Instructions

    Uploaded by

    steveop05
    364 views2 pages
    This document provides installation instructions for a White-Rodgers 1A65/1A65W electric heat thermostat. The thermostat is designed for use with electric heating systems like baseboards or wall heaters. It has a temperature range of 40-85°F and a narrow operating differential for accurate temperature control. The instructions describe how to install the thermostat in a wall electrical box, making sure not to damage the temperature sensing knob, and how to make electrical connections to control a heating system.

    Original Description:

    Fan Thermostat Install white rodgers

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides installation instructions for a White-Rodgers 1A65/1A65W electric heat thermostat. The thermostat is designed for use with electric heating systems like baseboards or wall heaters. It has a temperature range of 40-85°F and a narrow operating differential for accurate temperature control. The instructions describe how to install the thermostat in a wall electrical box, making sure not to damage the temperature sensing knob, and how to make electrical connections to control a heating system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    364 views2 pages

    White Rodgers - 1A65-641 - Install Instructions

    Uploaded by

    steveop05
    This document provides installation instructions for a White-Rodgers 1A65/1A65W electric heat thermostat. The thermostat is designed for use with electric heating systems like baseboards or wall heaters. It has a temperature range of 40-85°F and a narrow operating differential for accurate temperature control. The instructions describe how to install the thermostat in a wall electrical box, making sure not to damage the temperature sensing knob, and how to make electrical connections to control a heating system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    1A65/1A65W

    ELECTRIC-HEAT THERMOSTAT
    WHITE-RODGERS (Single Pole)
    INSTALLATION INSTRUCTIONS
    Operator: Save these instructions for future use!

    FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE


    INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
    INJURY AND/OR PROPERTY DAMAGE.
    DESCRIPTION
    The Type 1A65/1A65W Electric Heat Thermostat is de-
    signed for use on all types of electrical heating installa-
    tions such as cable heat, baseboards, wall insert heaters, 60 70

    etc. Its narrow operating differential and the ability of its


    fully exposed knob to sense both radiant heat and room 50

    80

    air temperature make this control ideal for use on such


    installations.
    Dial Setting: Knob may be set anywhere between 40°
    and 85°F by simply turning knob so that indicator on knob
    points to the desired setting.

    PRECAUTIONS
    This control is a precision instrument, and should be All wiring must conform to local and national electrical
    handled carefully. Rough handling or distorting compo- codes and ordinances.
    nents could cause the control to malfunction. Take care
    not to push or damage the knob sensing element ! WARNING
    during installation.
    Do not use on circuits exceeding specified volt-
    ! CAUTION ages. Higher voltages will damage control and
    could cause shock or fire hazard.
    To prevent electrical shock and/or equipment
    Do not use on inductive loads. Inductive (motor)
    damage, disconnect electric power to system, at
    loads will damage control and could cause shock
    main fuse or circuit breaker box, until installation
    or fire hazard.
    is complete.

    SPECIFICATIONS
    Switch Rating: Non-Inductive Temperature Range: 40° to 85°F
    22A (2500W) 120 VAC Differential: 1°F
    22A (5000W) 240 VAC Switch Action: Open on rise
    18A (5000W) 277 VAC Contact Structure: SPST

    INSTALLATION
    If the heating equipment manufacturer has made provi- 3. It should be mounted as far as possible from undesir-
    sions or recommendations for the location of this control, able sources of heat and cold such as:
    then follow those instructions. If not, the following sugges- a. Windows and doors
    tions should be observed. b. Direct rays from sun
    1. The control should be mounted in the wall, approxi- c. Hot water or cold water pipes
    mately five feet from the floor, as near as possible to
    d. Adjoining outside walls
    the centre of the controlled area.
    2. It should be mounted on a partitioning wall, not on an
    outside wall.
    WHITE-RODGERS DIVISION
    EMERSON ELECTRIC CO. PART NO. 37-5427C
    9797 REAVIS RD., ST. LOUIS, MO. 63123 Replaces 37-5427B
    (314) 577-1300, Fax (314) 577-1517 Printed in U.S.A.
    9999 HWY. 48, MARKHAM, ONT. L3P 3J3
    9520
    (905) 475-4653, FAX (905) 475-4625
    WIRING
    All wiring must conform to local and national electrical codes and ordinances.

    The thermostat may be mounted in any standard 2” x 3” 2. Push the lead wires into the outlet box and mount the
    electrical outlet box. For ease of installation use a deep thermostat to the outlet box with screws provided.
    type box. Take care not to push or damage the knob sens-
    ing element during installation.
    ! CAUTION 3. Snap on the thermostat cover and turn knob to
    USE WITH COPPER CONDUCTORS ONLY. desired setting.
    1. Make electrical connection to thermostat leads with
    wire nuts or other local code approved devices. All
    connections must be tight.

    Thermostat

    Note: Do not
    push on this knob
    because calibration Mounting Screw
    will be changed
    if knob is bent.
    BLACK

    BLUE

    60

    70
    50

    80

    LINE LOAD

    Mounting Screw
    Cover

    You might also like