MODULE 4 MATERIALS AND ACCESSORIES

Finishing Carpentry Materials and Accessories

Bill of Materials

CT 2-FINISHING CARPENTRY

MATERIALS AND ACCESSORIES 1

 Introduction:

This module contains information about materials used in

finishing carpentry. It is very important to know by the students to
distinguish/identify what particular materials they can use for a
specific finishing carpentry works. It includes also a bill of materials. It
will guide students on how to make a purchase list of materials
needed for constructing any civil works.

Learning Outcomes:
In the end of this module, you should be able to:
LO1. Identify finishing carpentry materials and accessories

LO2. Construct bills of materials according to plan and

specifications

MATERIALS AND ACCESSORIES 2

ACCESSORIES Is a thing that can be added to something else in order
to make it more useful, versatile, or attractive
-books.google.com.ph
LUMBER The term applied to wood after it has been sawed or
sliced into boards, planks, sticks, etc. for commercial
purposes.
-simplified methods on building construction book

MATERIAL Is the matter from which a thing is or can be made.

-www.dictionary.com

PLYWOOD A type of strong thin wooden board consisting of two or

more layers glued and pressed together with the
direction of the grain alternating, and usually sold in
sheets of four by eight feet.
-www.dictionary.com

MATERIALS AND ACCESSORIES 3

TOPIC FINISHING CARPENTRY
MATERIALS
LO1. Identify finishing carpentry materials and
1 accessories

FINISHING CARPENTRY
MATERIALS
Materials plays an important role in any specific works
especially in civil works. The construction of civil works cannot be
D finished without this. There are a lot of materials, we should know

I where to use it and where it really designed for. It may also cause
accident if not properly used. That’s why, we should always engage

S ourselves on safety practices.

C Information Sheet 1.1

Finishing Carpentry materials

U NAME PICTURE USE/FUNCTION

Use as primary material
S Good
in woodworking. It is
usually used as house

S Lumber frames (skeleton),

furniture, doors,

I
windows, etc.
It is made up of cement

O Fiber
Cement
and cellulose fibers
(plant extracts) and
best used for
N decorative purposes.

S Use commonly as
covering (wall, ceiling,
Plywood
etc.), formworks, doors,
etc.

MATERIALS AND ACCESSORIES 4

TOPIC FINISHING CARPENTRY
MATERIALS
1 LO1. Identify finishing carpentry materials

FINISHING CARPENTRY
MATERIALS
It is a versatile fascia
D Senepa
Board
board suitable for all
types of houses.
I
S Use to fasten coverings
on wooden frame,
Nails making joints, or
C holding things together,
etc.
U
S Nylon
String
Use in staking out
building lines, guide
lines, etc.
S
I
Used to join things
O Screws
together.

N
S Bolt Nut
and
Bolt
Used to fasten things
Washer together.
Washer
Nut

MATERIALS AND ACCESSORIES 5

TOPIC FINISHING CARPENTRY
MATERIALS
1 LO1. Identify finishing carpentry materials

FINISHING CARPENTRY
MATERIALS
It is a small hook with a

D Hook
Screw
threaded shank for
screwing into

I
woodwork or paneling.

It is a rivet that can be

S completely installed
from one side, unlike

C Blind Rivets machine screws and

nuts, which requires

U
access to both sides of
the material.
It is also known as self-
S drilling screws or self-
tapping fasteners that
Tek screw
S can tap its own hole as
it is driven into the

I
material.

O J-Bolt
It is a bolt shaped letter
J with threads usually
only on the longer leg.
N
S It is a joint that holds
two pieces of
something together
Hinge
while allowing one
piece to move in a
swinging motion.

MATERIALS AND ACCESSORIES 6

TOPIC FINISHING CARPENTRY
MATERIALS
1 LO1. Identify finishing carpentry materials

FINISHING CARPENTRY
MATERIALS
It is an adhesive used to
D Wood Glue tightly bond pieces of
wood together.
I
S Wood
It is a substance used to
fill imperfections, such

C Putty/Filler as holes, in wood prior

to finishing.

U It is a liquid preparation

S Varnish
that when applied to a
surface dries to form a
hard lustrous typically
S transparent coating.

I
It is a colored
substance that is
spread over a surface
O Paint
and dries to leave a
thin decorative or

N protective coating.

MATERIALS AND ACCESSORIES 7

TOPIC BILL OF MATERIALS
LO2. Construct bill of materials according to
2 plan and specifications

FINISHING CARPENTRY
MATERIALS
A bill of materials (BOM) is a comprehensive inventory

D
of the raw materials, assemblies, subassemblies, parts and
components, as well as the quantities of each, needed to

I manufacture a product. In a nutshell, it is the complete list of

all the items that are required to build a product. The materials
S descriptions written on it should be specific especially in types,

C sizes, and/or even brand if needed.

Information Sheet 2.1

U Bill of Materials Sample

S QUANTITY UNIT DESCRIPTIONS

2” x 3” x 12’ S4S
UNIT COST AMOUNT
20 pc Php 180.00 Php 3,600.00
S 10 pc
Good Lumber
3” Hinge Php 75.00 Php 750.00

I
6 mm x 4’ x 8’
10 pc Marine Php 230.00 Php 2,300.00
Plywood
O 5 Kg
3” CWN
(Common Wire Php 70.00 Php 350.00
N 5 Kg
Nail)
2” Finishing Nail Php 80.00 Php 400.00

S 1 roll
#60 Nylon
String
Php 65.00 Php 65.00
TOTAL Php 7,465.00

MATERIALS AND ACCESSORIES 8