MODERN PLASTIC INDUSTRY (L.L.

C)
(A Member of Al Shirawi Group of Companies)

MATERIAL SUBMITTAL
UPVC DRAINAGE PIPES & FITTINGS – BELOW GROUND

PROJECT : BEL AIR CLUSTER

LOCATION : DUBAI

CLIENT : DAMAC CRESCENT PROPERTIES L.L.C.

CONSULTANT : ARIF & BINTOAK CONSULTING ARCHITECTS & ENGINEERING

CONTRACTOR : DELTA AL EMARATE BUILDING CONTRACTING LLC

MEP CONTRACTOR : NASCON ENGINEERING CONTRACTING L.L.C

MANUFACTURER : MODERN PLASTIC INDUSTRY ( L.L.C )

SUPPLIER : MODERN PLASTIC INDUSTRY ( L.L.C )

P.O. Box: 31550 SALES: MITHUN-050 6517918

Dubai Investment Park 1
Dubai-UAE.
Tel.:04-8851300
 INDEX

1 PROJECT PROFILE

2 COMPLIANCE STATEMENT

3 LIST OF ITEMS

4 COUNTRY OF ORIGIN

5 WARRANTY CERTIFICATE

6 CATALOGUE

7 COMPANY PROFILE / TRADE LICENSE / ISO CERTIFICATE

8 VENDOR LIST

9 TEST REPORTS

10 APPROVAL CERTIFICATES
PROJECT PROFILE
COMPLIANCE STATEMENT
 Date: 08-04-2022
COMPLIANCE STATEMENT
uPVC DRAINAGE PIPES AND FITTINGS – BELOW GROUND

PROJECT: BEL AIR CLUSTER

REF PROJECT SPECIFICATION COMPLIANCE REMARKS

15105 PIPES AND TUBES
2.1 MATERIALS
2.1.6 Sanitary drainage, rain water and vent piping installed below grade:
A Drainage pipe work below grade within the Comply. MPI FLOWTECH brand uPVC underground
building upto manhole and between manholes drainage pipes and fittings, conform to the
shall be uPVC to BS 4660. standard BS EN 1401-1 formerly BS 4660.

Rubber ring socket, push fit joint type.

Refer the attached kitemark certificate for the

product list covered (index no.9).

B Drain pipe work installed below buildings and Contractor scope

roads shall be provided with 15cm concrete
encasement.
 Date: 08-04-2022

COMPLIANCE STATEMENT
UPVC SOIL, EASTE, VENT DRAINAGE PIPES AND FITTINGS – ABOVE GROUND

PROJECT: DAMAC HILLS PARK RESIDENCE VILLA 327 NUMBER

REF PROJECT SPECIFICATION COMPLIANCE REMARKS

15105 PIPES AND TUBES
2.1 MATERIALS
2.1.7 Sanitary drainage rain water and vent piping installed above Comply as proposed. Proposed MPI FLOWTECH brand uPVC above
grade shall be uPVC to BS 4514 for pipe sizes above 80mm ground soil, rainwater, vent, drainage pipes and
diameter and MuPVC to BS 5255 for pipe sizes 50mm fittings conform to the standard BS EN 1329-1
diameter and smaller. Fittings shall be push fit type. formerly BS 4514 & BS 5255.

56mm and below sizes solvent weld joint type.

82mm and above sizes rubber ring socket,
push fit joint type.

Refer the attached kitemark certificate for the

product list covered (index no.9).

Proposed uPVC Pipes & Fittings

 GOLF COMMUNITY

2.1.5 Domestic hot water:

A. PPR, polypropylene ( Random polymer) as specified by DIN 8078 &

1354991having density 0.909 / cm2 / PPR pipes are joined using fusion welding. Or
uPVC pipes to BS3505 with solvent welded fitting to BS 4346 for above grade
Installation.

B. Hot water pipes embedded in builder's work shall be PEX tubes within a
polyethylene sleeve.

2.1.6 Sanitary drainage, rain water and vent piping installed below grade:

A. Drainage pipe work below grade within the building upto manhole and between
manholes shall be uPVC to BS 4660.

B. Drain pipe work installed below buildings and roads shall be provided with 15cm
concrete encasement.

2.1.7 Sanitary drainage rain water and vent piping installed above grade shall be uPVC to BS 4514 for
pipe sizes above 80mm dia and MuPVC to BS 5255 for pipe sizes 50mm dia and smaller.
Fittings shall be push fit type.

2.1.8 Drainage pipes from main kitchen (ground floor - main buildings shall be HDPE with electrical
fusion socket welded joints and fittings.

2.1.9 Condensate drain piping shall be:

A. uPVC Class E to BS 3505 with solvent welded fittings to BS4346 for installation not
exposed to view.

B. GI Pipes to BS EN 10255:2004 Class B with threaded fittings to BS EN

10241:2000 for installation on roofs and within plant rooms.

2.1.9 Fuel oil piping shall be ERW black steel to BS 1387 Class B with welded
Fittings to BS 1965.

3.0 EXECUTION

Provide a complete system of sanitary drainage for all building waste and condensate
drainage and connect to the main drainage system. Install piping in strict compliance with
manufacturer's written instruction and the requirement of the Consultant.

3.0 Pipe passing under a driveway or parking lot shall be encased in 150 mm of 1.37 MPa concrete on
the top, bottom and sides.

3.1 Compaction for the full width of the pipe trench shall be to at least 95% Modified Proctor
Mechanical Specification
15105 -Pipes and Tubes Page 4
LIST OF ITEMS
 LIST OF MATERIALS
uPVC DRAINAGE PIPES & FITTINGS - UNDERGROUND
Catalogue
Item Description Sizes Standard Make Manufacturer Origin Joint Colour Application
Page

uPVC Drainage Pipes & Fittings Ø36mm to Ø56mm BS EN 1329-1 Solvent Weld Light Grey 10, 18-23

dimensionally conforming to
uPVC Drainage Pipes & Fittings Ø82mm BS EN 1329-1 & colour 11, 24-27
conforming to BS EN 1401-1
Flowtech Modern Plastic Dubai-UAE Underground drainage
uPVC Drainage Pipes Ø110mm to Ø400mm 11
Push Fit Orange
BS EN 1401-1
uPVC Drainage Fittings Ø110mm to Ø200mm 24-27

uPVC Gully Trap 160X110mm BS EN 1401-1 27

Note:
1. Item, Quantity & Sizes will be used as indicated in the approved shop drawings.
 LIST OF PROPOSED MATERIAL
uPVC DRAINAGE PIPES & FITTINGS - ABOVE GROUND
Catalogue
Item Description Sizes Standard Make Manufacturer Origin Joint
Page

uPVC Aboveground Drainage Pipes Ø36mm, Ø43mm & Ø56mm 10

BS EN 1329-1 / BS 5255 Flowtech Modern Plastic Dubai-UAE Solvent Weld
uPVC Aboveground Drainage Fittings Ø36mm, Ø43mm & Ø56mm 18-23

uPVC Aboveground Drainage Pipes Ø82mm to Ø315mm 10

BS EN 1329-1 Flowtech Modern Plastic Dubai-UAE Push fit
uPVC Aboveground Drainage Fittings Ø82mm to Ø200mm 18-23

Note: Item, Quantity & Sizes will be used as indicated in the approved shop drawings.

1 of 1
COUNTRY OF ORIGIN
 Date: 08-04-2022

COUNTRY OF ORIGIN CERTIFICATE

TO WHOMSOEVER IT MAY CONCERN

Modern Plastic Industry (L.L.C) hereby confirms that all uPVC Soil & Drainage for Above
and Below Ground application, Slotted Pipes, High Pressure, Duct/Sleeve - Pipes and Fittings,
PPR Pipes & Fittings, Long Radius Bend, Gully Trap, Catch Basin, Puddle Flange, Dry
Manholes, Sand Trap Basket, Grease Traps, Parking Drain, Pressure Breaking Chamber and
Floor Traps are manufactured / fabricated in-house using the state of art, microprocessor
controlled injection moulding machines, high quality precision moulds and pipe extruders in
our own facility located at Dubai Investment Park1, Dubai, U.A.E. complying to the British
and DIN standards.

For Modern Plastic Industry (L.L.C)

WARRANTY CERTIFICATE
 Date: 08-04-2022

DRAFT WARRANTY CERTIFICATE

TO WHOMSOEVER IT MAY CONCERN

Modern Plastic Industry (L.L.C) hereby warranties for a period of 5 years from the date of
TOC for uPVC below ground drainage pipe & fittings (Injection Moulding).

This warranty does not cover any force majeure on damage or determination to the product due
to in appropriate use or negligent act or omissions related to second party. The claim will be
limited only to the invoiced value of the supplied products which are accepted by Modern
Plastic Industry (L.L.C), as defective.

For Modern Plastic Industry (L.L.C)

CATALOGUE
Floor trap inside buildings wet aeas
External gully trap
COMPANY PROFILE / TRADE LICENSE / ISO CERTIFICATE
Modern Plastic Industry L.L.C.

Over 30 years of Excellence

Reliability, Quality and Value

Profile
Modern plastic industry is a part of AL SHIRAWI GROUP OF COMPANIES which is
one of the largest and most diversified business conglomerates in the Arabian Gulf.
From its inception in 1971 as a trading and contracting company, the Group has
broadened its scope to encompass a cross section of products, services and industries
ranging from printing, heavy fabrication, engineering, electromechanical, electronics,
trucks and logistics.
Established in 1987, Modern Plastic industry (MPI) has pioneered the manufacturing
of UPVC pressure pipe fittings in the UAE. Today Modern Plastic has a wide range of
SWR drainage, high pressure UPVC, PPR, PP-RCT, CPVC, PP Compression and Duct
pipes & fittings.
MPI products have been used extensively in the irrigation, construction, plumbing and
Landscaping industry and are playing a significant role in the development of the Gulf
region and Middle East.

STATE-OF-THE-ART FACILITY
MPI products are manufactured in a state-of-the-art facility at Dubai Investment
Park with Precision moulds for fittings and high quality State-of-the-art
Microprocessor based Injection Moulding Machines and High Quality Extrusion
Machines for pipes.
Technology is the backbone of ongoing development and the right design selection
headed by a team of experienced and well-trained professionals complements the
development process.
MPI has established an in-house tool room with the latest CNC machines and EDM
machines, which are used to manufacture moulds as per the needs of market.

GLOBAL PRESENCE
MPI has been the leader in the Gulf market mainly because it can offer the widest
range of UPVC Drainage High Pressure and PPR Pipes and Fittings which are specially
designed to meet the harsh climatic conditions with more emphasis of Quality, Relia-
bility and Economy.
MPI is managed by a team of experienced and well trained professionals, and markets
its range of products in the AGCC region, the Middle East, Africa, Europe, CIS Country
and the Asian subcontinent.
 PP-R / PP-RCT / PP-R fiber

PP-R PIPES, FIBER PIPES PP-R CT PIPES

20mm TO 160mm - SDR 6, SDR 7.4, DIN 20mm TO 160mm - SDR 9, SDR 7.4,160mm
8077/8078, - SDR 11, SDR 7.4, DIN 8077/8078, EN ISO
EN ISO 15874 - 2 15874 - 2

PP-R FITTINGS PP-R CT FITTINGS

20mm TO 63mm - SDR 5, 20mm TO 63mm - SDR 5,
75mm TO 110mm - SDR 6 75mm TO 110mm - SDR 6
DIN 16962, EN ISO 15874 - 3 EN ISO 15874 - 3

PP-R pipes and fittings: PP-RCT pipes and fittings:

20mm – 160mm (SDR 5 and SDR 6) 20mm – 110mm (SDR 5, SDR 6, SDR 7.4 and SDR 11)
• Corrosion resistance. • Improved impact strength .
• Low thermal conductivity. • Reduced expansion.
• Reduced pressure losses. • Lower wall thickness and higher hydraulic
• Acoustic isolation. capacity.
• Organoleptical properties. • Exceptionally high flow rates and velocities.
• Adjusted useful life. • 50% higher in long term strength than regular
• Installation reduced time. PPR.
• Can withstand constant temperature up to • Can be used in potable water system,
70°C with a minimum service life of 50 years. heating systems, thermal water systems
and industrial systems.
Application • Withstand both chilled water and near to
. .
• Potable water Plumbing Heating and boiling temperatures.
. .
cooling Swimming pool Chemical
.
transport Under floor heating and low
temperature radiators.
 UPVC Soil / Waste & Drainage

32mm TO 315mm - CONFORM TO BS-EN 1329 COLOUR

GREY COLOUR - SOIL AND WASTE PIPES The pipes are coloured
& FITINGS throughout the wall as follows:
• Above Ground : BS EN 1329-1 : Grey.
110mm TO 400mm - CONFORM TO BS-EN 1401 • Below Ground : BS EN 1401-1 : Orange
ORANGE COLOUR - DRAINAGE PIPES & Brown / Terra Cotta.
FITINGS
EFFECTIVE LENGTH
Drainage Systems offer a All Pipes are manufactured in 4m and
complete range of pipes and 6/5.8m lengths.
fittings for waste. Soil and
Drainage applications to cater to SOCKETS
the growing needs of the building The pipes are supplied as follows:
construction industry. 32mm, 36mm(1 1/4”), 43mm(1 1/2”) &
56mm (2”)
RAW MATERIAL pipes are supplied with plain ends.
The raw material used is 100% UPVC virgin
material, with necessary additives/chemicals 82mm(3”), 110mm(4”), 160mm(6”),
needed to facilitate the manufacturing 200mm(8”), 250mm(10”), 315mm(12”) &
process. 400mm(16”)
pipes are supplied with solvent cement
APPEARANCE socket or rubber ring socket.
The internal and external surface of the
pipes are smooth, clean and free from
surface defects.
 CPVC PRESSURE PIPES & FITTINGS

HIGH PRESSURE CPVC PIPES & FITTINGS Colour

20mm TO 160mm CONFORMING The colour of the Pipes and Fittings are
TO DIN 8079 / 8080; ISO 15877- 2 Cream for DIN Standards.
& ISO 15877 - 3; ISO 7 - 1
Effective Length of Pipes
All pipes are manufactured in 3meter
MPI Pipes and Fittings are the “CPVC / 4meter lengths or as per customer’s
(Chlorinated PolyVinyl Chloride) requirement.
Pipes and Fittings System”
for cold and hot water Working Pressure
distribution precisely designed All CPVC Pipes and Fittings depending upon
for solvent welding jointing. the standards are made for permissible
continious working
pressure PN 16 ; PN 20 and PN 25.

Raw Material
The raw material used is 100% CPVC virgin
compounded material.

Appearance
The internal and external surface of the
Pipes and Fittings are smooth, clean and
free from surface defects.
 PP COPMRESSION FITTINGS

PP Compression fittings. Colour

from D20mm to D63mm-16 Bar, The colour of the Fitting Body, Thrust Bush
and D75mm to 110mm-10 Bar. and Nut are generally Black; Clinching Ring
Conforming to ISO 3458, ISO 3501, in White.
ISO 3503, ISO 14236, DIN 8076-3, UNI Blue nut colour is available.
9562,
UNI 9561, BS 5114/75. Pressure Rating at 20°C
D 20 mm to D 63 mm - 16 bar
MPI PP Compression Fittings and D 75 mm to D 110mm - 10 bar.
Clamp Saddles are designed
particularly for connecting
Polyethylene pipes used to convey
fluids for drinking water and
irrigation systems.

Raw Material
Body, Thrust Bush and Nut in Polypropylene
Co-Polymer, Clinching Ring in White Acetal
Resin, O-Ring Gasket in NBR, Reinforcement
ring in AISI 430.

Appearance
The internal and external surface of the
Fittings are smooth, clean and free from
surface defects.
 UPVC DUCT PIPES & FITTINGS

DUCT PIPE Bends

• AS PER DIN 8062 - 25mm TO 315mm Short radius and Long radius 22.5°, 45°, 90°
• AS PER 3506 - 1 1/4” TO 12”
• AS PER EN 1452 Junctions
DUCT PIPE TELEPHONE CABLE D56 & D54 Square and Sweep Tees, Crosses and
DUCT FABRICATED FITTINGS Fittings, Double Sockets, Bellmouths, End
Caps.
Ducts are used in Telephone
Cables, High voltage underground GENERAL PROPERTIES
cables, street and housing power
supplies, factory and industrial Specific Gravity : 1.41
applications, sheathing of water Vicat Softening Temperature : Min 80°C
and gas services. Tensile strength : > 45 MN/ sq cm at 20°C
Flammability : UPVC is self-extinguishing
Raw Material and will not support combustion
The raw material used is 100% material Specific heat : 1040 J/ Kg / °C
with necessary additives / chemical needed
to facilitate the manufacturing proces

Colour
The colour of the pipe shall be Grey / Black
or as per customer requirement.
Effective Length.
The standard length shall be 6m with socket
or as per customer requirement.
 UPVC FABRICATED PRODUCTS

PUDDLE FLANGE specification.

SOIL/DRAINAGE/ PRESSURE, SLOTTED All the welded joints are spark tested to
LAND DRAIN PIPES, ensure the weld is strong, air and water
SEALED DRY MANHOLES, GREASE TRAPS tight. Small fabrication of Electric Bell
(TYPE A,B & C), CATCH BASIN & RAMP Mouth to complete fabrication of any
CHANNEL, DRY GULLY TRAP building plumbing system, our team is fully
equipped to provide our valuable clients
Modern Plastics Industry has with the complete solutions suited to their
led the field in the design and specific tailor made requirements.
manufacture of specialized PVC MPI Fabricated products are designed and
Fabricated fittings. supplied to complement our UPVC molded
product range, to resolve the requirements
Our skilled work force operates of any on site specials & custom made
within the parameters laid down Fabricated fittings to complete the range for
by the BSI, to produce highest our valued and prestigious projects for our
quality fabricated fittings from valued customers.
MPI KiteMarked Pipes & fittings to
form, shape and adapt a multitude MPI Fabricated products committed with
of plastic product to precise “Quality & Precision“
 REFERNCE PROJECTS

New York University, Abu Dhabi Mira community, Emaar, Dubai

Sofitel Hotel, Palm Jumeirah, Dubai Grosvenor House, Dubai

Dubai Marina 101 Tower Duja Tower, Dubai

quality certificates
 Why MPI
• Proven research capability and ability to provide products to suit customer
application needs.
• Value pipes & fittings at a competitive price.
• Technical service and installation backup.
• One stop facility - wide range of pipes & fittings in UPVC (SWR Drainage), UPVC
high pressure, CPVC & PP Compression and PP-R / PP-RCT.
• Prompt deliveries in-house manufacturing facilities for all the pipes and fittings
in UAE.
• Quality - according to international standards, Quality management system (ISO
9001, Kitemark, WRAS).
• Operational excellence - precision manufacturing according to the standards
using state of the art machinery.
• Duty exemption in GCC countries.
• Reliability - 24 hours customer service.

).‫م‬.‫م‬.‫ذ‬.‫صناعة البالستيك الحديثة (ش‬

+٩٧١-٤-٨٨٥ ١٣٠١ :‫ فاكس‬،+٩٧١-٤-٨٨٥ ١٣٠٠ :‫ تليفون‬،‫م‬.‫ع‬.‫ ا‬- ‫ دبي‬،٣١٥٥٠ :‫ب‬.‫ص‬

P.O. Box: 31550, Dubai - U.A.E., Tel.: +971-4-8851300, Fax: +971-4-8851301
E-mail: marketing@mpi.ae Web Location: http://www.mpi.ae
 ‫رخصة صناعية‬
‫‪Industrial License‬‬
‫تفاصيل الرخصة ‪License Details /‬‬
‫‪License No.‬‬ ‫‪300321‬‬ ‫رقم الرخصة‬

‫صناعة‪ ‬البلستيك‪ ‬الحديثة‪( ‬شركة‪ ‬ذات‪ ‬مسئولية‪ ‬محدودة)‬ ‫اسم الشركة‬

‫‪Company Name‬‬ ‫(‪MODERN PLASTIC INDUSTRY )L.L.C.‬‬
‫صناعة‪ ‬البلستيك‪ ‬الحديثة‪( ‬ش‪ . ‬ذ‪ .‬م‪ .‬م)‬ ‫السم التجارى‬
‫‪Trade Name‬‬ ‫(‪MODERN PLASTIC INDUSTRY )L.L.C.‬‬

‫‪Legal Type‬‬ ‫(‪Limited Liability Company)LLC‬‬ ‫ذات‪ ‬مسئولية‪ ‬محدودة‬ ‫الشكل القانونى‬

‫‪Expiry Date‬‬ ‫‪21/07/2022‬‬ ‫تاريخ النتهاء‬ ‫‪Issue Date‬‬ ‫‪22/07/1987‬‬ ‫تاريخ الصدار‬

‫® ‪D&B D-U-N-S‬‬ ‫‪ 645797168‬‬ ‫الرقم العالمي‬ ‫‪Main License No.‬‬ ‫‪ 300321‬‬ ‫رقم الرخصة الم‬
‫‪No.‬‬
‫‪Register No.‬‬ ‫‪ 46900‬‬ ‫رقم السجل التجارى‬ ‫‪DCCI No.‬‬ ‫‪ 12646‬‬ ‫عضوية الغرفة‬

‫الطراف ‪License Members /‬‬

‫الحصص ‪Share /‬‬ ‫الصفة ‪Role /‬‬ ‫الجنسية ‪Nationality /‬‬ ‫السم ‪Name /‬‬ ‫رقم الشخص‪No./‬‬

‫مدير‪Manager / ‬‬ ‫الهند‪India / ‬‬ ‫سوبهاش‪ ‬موتيلل‪ ‬شيربهايى‪ ‬موتيلل‪ ‬نارايان‪ ‬شيربهايى‬ ‫‪ 904336‬‬

‫‪SUBHASH MOTILAL SHIRBHAIYE ‬‬
‫‪MOTILAL NARAYAN SHIRBHAIYE‬‬
‫‪Beneficiary Owner consent of this license has been signed‬‬ ‫تم توقيع إفادة المستفيد الحقيقي لهذه الرخصة بتاريخ ‪ .05/07/2021‬للمزيد من‬
‫‪on 05/07/2021. For more information or to know the‬‬ ‫المعلومات أو لمعرفة المستفيد الحقيقي يرجى التكرم بزيارة مراكز الخدمة أو الخدمات‬
‫‪Beneficiary Owner please visit any DED service center or‬‬ ‫اللكترونية التابعة لدائرة التنمية القتصادية‪.‬‬
‫‪DED eServices website.‬‬

‫نشاط الرخصة التجارية ‪License Activities /‬‬

‫‪Plastic Pipes & Fittings Manufacturing‬‬ ‫صناعة‪ ‬النابيب‪  ‬البلستيكية‪ ‬ولوازمها‬
‫العنوان ‪Address /‬‬
‫‪Phone No‬‬ ‫‪971-4-8851300‬‬ ‫تليفون‬ ‫‪P.O. Box‬‬ ‫‪31550‬‬ ‫صندوق بريد‬
‫‪Fax No‬‬ ‫‪971-4-8851302‬‬ ‫فاكس‬ ‫‪Parcel ID‬‬ ‫‪0‬‬ ‫رقم القطعة‬
‫‪Mobile No‬‬ ‫‪971-50-1893299‬‬ ‫هاتف متحرك‬ ‫مستودع‪ ‬ملك‪ ‬مجمع‪ ‬دبي‪ ‬للستثمار‪ ‬الول‪    ‬بردبي‪ - ‬شارع‪ ‬المارات‬

‫البريد اللكتروني ‪Email /‬‬

‫الملحظات ‪Remarks /‬‬

‫تم‪ ‬تغيير‪ ‬المدير‪ ‬في‪.2021-01-20 ‬‬

‫‪Print Date‬‬ ‫‪29/07/2021‬‬ ‫‪16:23‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪13998856‬‬ ‫رقم اليصال‬
‫يمكنك‪ ‬الن‪ ‬تجديد‪ ‬رخصتك‪ ‬التجارية‪ ‬من‪ ‬خلل‪ ‬الرسائل‪ ‬النصية‪ ‬القصيرة‪ ،‬أرسل‪ ‬رقم‪ ‬الرخصة‪ ‬إلى‪( 6969 ‬دو‪/‬اتصالت)‪ ‬للحصول‪ ‬‬
‫على‪ ‬اذن‪ ‬الدفع‪.‬‬ ‫‪Get FREE access to ‬‬
‫‪Zoho One for the first ‬‬
‫‪Now you can renew your trade license by sending a text message )SMS(.  Send your trade ‬‬ ‫‪year‬‬
‫‪license number to 6969 )Du/ Etisalat( to receive payment voucher.‬‬ ‫احصل‪ ‬على‪ ‬زوهو‪ ‬ون‪ ‬مجانا ‪ .‬‬
‫للسنة‪ ‬الولى‬
‫‪Zoho.com/ded‬‬

‫‪ ‬وثيقة‪ ‬إلكترونية‪ ‬معتمدة‪ ‬وصادرة‪ ‬بدون‪ ‬توقيع‪ ‬من‪ ‬دائرة‪ ‬التنمية‪ ‬القتصادية‪. ‬لمراجعة‪ ‬صحة‪ ‬البيانات‪ ‬الواردة‪ ‬في‪ ‬الرخصة‪ ‬برجاء‪ ‬زيارة‪ ‬الموقع‪www.dubaided.gov.ae ‬‬
‫‪Approved electronic document issued without signature by the Department of Economic Development.  To verify the ‬‬
‫‪license kindly visit www.dubaided.gov.ae‬‬
 ‫شهادة شهر قيد شركة فى السجل التجارى‬
Commercial Register
Register Details / ‫تفاصيل القــيد‬
Main Lice. Nr  300321 ‫ رقم الرخصة الم‬Register No.  46900 ‫رقم القيد‬

Company )‫محدودة‬ ‫مسئولية‬ ‫ذات‬ ‫(شركة‬ ‫الحديثة‬ ‫البلستيك‬ ‫صناعة‬
Name MODERN PLASTIC INDUSTRY )L.L.C.(
Legal Type ‫الشكل القانونى‬
Limited Liability Company)LLC( ‫محدودة‬ ‫مسئولية‬ ‫ذات‬
Expiry Date 21/07/2022 ‫ تاريخ النتهاء‬Reg. Date 30/05/1996 ‫تاريخ الصدار‬
D&B D-U-N-S ®  ‫الرقم العالمي‬
No.  645797168

Capital Details / ‫تفاصيل راس المال‬

Nominated  3,700,000 ‫السمى‬
Paid  3,700,000 ‫المدفوع‬
No. of Shares  0 ‫عدد السهم‬
Currency UAE Dirhams ‫اماراتي‬ ‫درهم‬ ‫العملة‬

License Address / ‫عنوان الرخصة‬

‫المارات‬ ‫شارع‬ - ‫بردبي‬    ‫الول‬ ‫للستثمار‬ ‫دبي‬ ‫مجمع‬ ‫ملك‬ ‫مستودع‬

Commerce Address / ‫عنوان السجل التجاري‬

3338700 : ‫ت‬ 93 ‫ب‬ ‫ص‬ - ‫الرمول‬ - ‫للتمويل‬ ‫عمان‬ ‫شركة‬ ‫بواسطة‬ - ‫دبي‬ ‫حكومة‬  ‫عقارات‬ ‫ملك‬
Register Activities / ‫أنشطة السجل‬
Plastic Pipes & Fittings Manufacturing ‫ولوازمها‬ ‫البلستيكية‬  ‫النابيب‬ ‫صناعة‬
Pipes & Fittings Trading ‫والمواسير‬ ‫النابيب‬ ‫تجارة‬
Doors, Windows & other Plastic Building Products Trading ‫للبنية‬ ‫البلستيكية‬ ‫الشغال‬ ‫تجارة‬
Plastic & Nylon Raw Materials Trading ‫والنايلون‬ ‫البلستيك‬  ‫خامات‬ ‫تجارة‬
Plastic Bags & Containers Trading ‫البلستيكية‬  ‫والكياس‬  ‫العبوات‬ ‫تجارة‬
Plastic Sheets Trading ‫البلستيكية‬ ‫اللواح‬ ‫تجارة‬

Branches / ‫الفروع‬
‫السم التجارى‬ ‫رقم الرخصة‬
Trade Name License No

)‫(فرع‬ )‫م‬ .‫م‬ .‫ذ‬ . ‫(ش‬ ‫الحديثة‬ ‫البلستيك‬ ‫صناعة‬  753844
MODERN PLASTIC INDUSTRY )L.L.C.( )BRANCH(

Print Date 29/07/2021 16:23 ‫تاريخ الطباعة‬ Receipt No. 13998856 ‫رقم اليصال‬
 ‫للحصول‬ )‫اتصالت‬/‫(دو‬ 6969 ‫إلى‬ ‫الرخصة‬ ‫رقم‬ ‫أرسل‬ ،‫القصيرة‬ ‫النصية‬ ‫الرسائل‬ ‫خلل‬ ‫من‬ ‫التجارية‬ ‫رخصتك‬ ‫تجديد‬ ‫الن‬ ‫يمكنك‬
.‫الدفع‬ ‫اذن‬ ‫على‬ Get FREE access to 
Zoho One for the first 
Now you can renew your trade license by sending a text message )SMS(.  Send your trade  year
license number to 6969 )Du/ Etisalat( to receive payment voucher.  . ‫مجانا‬ ‫ون‬ ‫زوهو‬ ‫على‬ ‫احصل‬
‫الولى‬ ‫للسنة‬
Zoho.com/ded

www.dubaided.gov.ae ‫الموقع‬ ‫زيارة‬ ‫برجاء‬ ‫الرخصة‬ ‫في‬ ‫الواردة‬ ‫البيانات‬ ‫صحة‬ ‫لمراجعة‬. ‫القتصادية‬ ‫التنمية‬ ‫دائرة‬ ‫من‬ ‫توقيع‬ ‫بدون‬ ‫وصادرة‬ ‫معتمدة‬ ‫إلكترونية‬ ‫وثيقة‬ 
Approved electronic document issued without signature by the Department of Economic Development.  To verify the 
license kindly visit www.dubaided.gov.ae
VENDOR LIST
Bid of Nascon Engineering Contracting DH - BEL AIR - V23.V27 MEP TENDER
BOQ Document Version: V1 Reference: T1
Bid not submitted yet

Item No. Code Code Item Description and Remarks Quantity Units Unit Rate Adj Total Price Documenter Bidder Image
descripti Image
on

1.3.1.1.2 D2010.2 ditto, 40 mm diameter. 2.0 m 0.00 --- ---

21100

1.3.1.1.3 D2010.2 ditto, 50 mm diameter. 9.0 m 0.00 --- ---

21100

1.3.1.1.4 D2010.2 ditto, 82 mm diameter. 22.0 m 0.00 --- ---

21100

1.3.1.1.5 D2010.2 ditto, 110 mm diameter. 31.0 m 0.00 --- ---

21100

1.3.1.2 uPVC pipes to BS4514 for rain/surface × 0.00 --- ---

water drainage with joint as per
specification, complete including
fittings, expansion fittings, antivibration
hangers and supports all as in
accordance with the drawings and
specifications. Approved
Makes:Hepworth,ARGO-EUROPE, Gulf
Eternet, National Plastic, Terrain,
Durapipe, Eurapipe, George Fischer,
Uponor, Geberit Cosmoplast & Modern
Plastic Industry.

1.3.1.2.1 D2010.2 pipe, 110 mm diameter. 10.0 m 0.00 --- ---

21100

Page 38 (of 134) Powered by

TEST REPORTS
 TEST CERTIFICATE
UPVC PIPES TO BSEN 1401
DATE: 05/01/2022

Manufacturer : Modern Plastic Industry LLC

Product : 110mm, Drainage UPVC Pipe, FLOWTECH
Marking : Modern Plastic FLOWTECH UAE BS 4660 / EN 1401 110x3.20mm PVC-U SN4 SDR41 UD

The above Pipe manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Pipe is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown/Inner and outer surface shall

Colour/Surface OK Pass
1 be smooth
Mean Outside Diameter : 110.0 - 110.30 MM 110.25MM Pass
2
Dimensions(mm)
Wall thickness : 3.20 - 3.80MM 3.28 - 3.45MM Pass
3 Below 5% ,The pipe shall exhibit no bubbles
Heat reversion 2.10% Pass
or cracks
4 Resistance to
No attack at any part of the surface of pipe OK Pass
Dichloromethane
5 Test
Impact test TIR < 10% No Crack of pipes 0/25 Pass
6 Water Tightness of
No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
7 Min. 79°C 79.90°C Pass
Temperature
(VST)
We certify that the above Pipe meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which are conducted in good faith for the customer.
 TEST CERTIFICATE
DATE: 25/01/2022
UPVC PIPES TO BSEN 1401

Manufacturer : Modern Plastic Industry LLC

Product : 160 mm, Drainage UPVC Pipe, FLOWTECH
Marking : Modern Plastic FLOWTECH UAE BS 4660 / EN 1401 160x4.00mm PVC-U SN4 SDR41 UD

The above Pipe manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Pipe is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown / Inner & outer surfaces shall
Colour/Surface OK Pass
1 be smooth
Mean Outside Diameter : 160.0 - 160.40MM 160.30MM Pass
2
Dimensions(mm)
Wall thickness : 4.00 – 4.60MM 4.06 - 4.38MM Pass
3 Below 5% ,The pipe shall exhibit no bubbles
Heat reversion 2.15% Pass
or cracks
4 Resistance to
No attack at any part of the surface of pipe OK Pass
Dichloromethane
5 Test
Impact test TIR < 10% No Crack of pipes 0/25 Pass
6 Water Tightness of
No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
7 Min. 79°C 79.90°C Pass
Temperature
(VST)
We certify that the above Pipe meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which are conducted in good faith for the customer.
 TEST CERTIFICATE
DATE: 03/01/2022
UPVC PIPES TO BSEN 1401

Manufacturer : Modern Plastic Industry LLC

Product : 200 mm, Drainage UPVC Pipe, FLOWTECH
Marking : Modern Plastic FLOWTECH UAE BS 4660 / EN 1401 200x4.90mm PVC-U SN4 SDR41 UD

The above Pipe manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Pipe is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown / Inner & outer surfaces shall
Colour/Surface OK Pass
1 be smooth
Mean Outside Diameter : 200.0 - 200.50MM 200.30MM Pass
2
Dimensions(mm)
Wall thickness : 4.90- 5.60MM 4.95 - 5.30MM Pass
3 Below 5% ,The pipe shall exhibit no bubbles
Heat reversion 2.85% Pass
or cracks
4 Resistance to
No attack at any part of the surface of pipe OK Pass
Dichloromethane
5 Test
Impact test TIR < 10% No Crack of pipes 0/25 Pass
6 Water Tightness of
No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
7 Min. 79°C 79.80°C Pass
Temperature
(VST)
We certify that the above Pipe meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which are conducted in good faith for the customer.
 TEST CERTIFICATE
Date: 04/02/2022
UPVC FITTINGS TO BS EN 1401

Manufacturer : Modern Plastic Industry LLC

Product : Below Ground Rubber Ring Fittings , "FLOWTECH"
Size & Name : 110x45° Bend MF
The above Fittings manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Fittings is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown / Smooth clean and free from

1 Colour/Surface grooving, blistering, impurities, pores or other OK Pass
surface irregulatory.

Mean outside diameter of Spigot : 110.0 - 110.30 110.20 Pass

Mean inside dia of Socket : Min 110.40 110.52 Pass

Dimensions(mm)
2
Socket Depth (Min) : 32 40.0 Pass

Wall Thickness (e) : 3.20 - 3.80 3.35 Pass

At 150° C for 30 min, the length of cracks shall
3 Effects of Heating not exceed 50 % of the wall thickness from the 12% Pass
gate point
Water Tightness of
4 No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
5 The VST shall be 79°C or more 79.9°C Pass
Temperature (VST)
We certify that the above Fittings meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which were conducted in good faith for the customer.
 TEST CERTIFICATE
Date: 04/02/2022
UPVC FITTINGS TO BS EN 1401

Manufacturer : Modern Plastic Industry LLC

Product : Below Ground Rubber Ring Fittings , "FLOWTECH"
Size & Name : 160x87.5° Tee MF
The above Fittings manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Fittings is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown / Smooth clean and free from

1 Colour/Surface grooving, blistering, impurities, pores or other OK Pass
surface irregulatory.

Mean Outside Dia : 160.00-160.40 160.30 Pass

Mean inside dia of Socket : Min 160.50 160.68 Pass

2 Dimensions(mm)
Socket Depth (Min) : 42 58.0 Pass

Wall Thickness (e) : 4.00 - 4.60 4.35 Pass

At 150° C for 30 min, the length of cracks shall
3 Effects of Heating not exceed 50 % of the wall thickness from the 12% Pass
gate point
Water Tightness of
4 No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
5 The VST shall be 79°C or more 79.9°C Pass
Temperature (VST)
We certify that the above Fittings meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which were conducted in good faith for the customer.
 TEST CERTIFICATE
Date: 02/02/2022
UPVC FITTINGS TO BS EN 1401

Manufacturer : Modern Plastic Industry LLC

Product : Below Ground Rubber Ring Fittings , "FLOWTECH"
Size & Name : 200mm Y45° MF
The above Fittings manufactured by Modern Plastic Industry LLC, was tested in accordance to BS EN 1401
The test result of a typical sample of the above Fittings is as stated below.

S NO Description Std Requirement Results Remark

Orange Brown / Smooth clean and free from

1 Colour/Surface grooving, blistering, impurities, pores or other OK Pass
surface irregulatory.

Mean outside diameter of Spigot : 200.0 -200.50 200.35 Pass

Mean inside dia of Socket : Min 200.60 200.68 Pass

2 Dimensions(mm)
Socket Depth (Min) : 50 65.0 Pass

Wall Thickness (e) : 4.90 - 5.60 4.98 Pass

At 150° C for 30 min, the length of cracks shall
3 Effects of Heating not exceed 50 % of the wall thickness from the 15% Pass
gate point
Water Tightness of
4 No leakage at 0.5 bar for 15 min. OK Pass
joint
Vicat Softening
5 The VST shall be 79°C or more 79.9°C Pass
Temperature (VST)
We certify that the above Fittings meets the standard based on the strength of these results.
Note: The above results are based on the sample tested, which were conducted in good faith for the customer.
APPROVAL CERTIFICATES
 4
<n·..il u'A9liiill .¥wJb
NARESCO CONTRACTING ~.LC.)
llECTRo:.".lCHANi(A! CO'.IPA~i LL C.

I SUBMITTAL TRANSMITTAL SHEET# I 01_·__ __.

Project No. 07
Project Name G-007 Akoya Hotel Apartment Date 05-7-16

Submittal No.: Ref. No.MS-M-001 !Revision: 0

Submittal Title: UPVC Drainage Pipes & Fitting Below Ground
We are sending herewith under separate cover the drawings I documents I samples listed below:
ITEM NO. DWGS.
SPECS BOO DESCRIPTION TYPE COPIES REMARKS
REF.
Bill no -.81 .3 UPVC Drainage Pipes & 1 +Soft copy
1 Fittings MS

TYPE: SD= Shop Drawings.MS= Material Submittal, SAR= Subcontractor Approval Request, SM= Sample, GT= Guarantee, MD=
Manufacturer's Data, CT= Certificates, TT= Test Results, OT= Other
Supplier I Manufacturer: 1~odern plastic ind~stry LLC Dubai/ Modern plastic
industry LLC Dubai/
We certify that the documents I materials submitted herewith have been reviewed in detail and are in strict
conformance with the contract dra~in§s-and-speoifications..exc.ePt.a~ . .Qt[lerwise stated.

Design Consultant Review Comments

Consultant Decision
@:_f(b ob.~(~~ ~v~~~~ \o <2-ov~'{'\~ O Approved
\Ab~\\_o,;~'"'S o...S f<?--r b'f~<4~"~~~~ o~ Approved As Noted
~.. . . __,.,__~c.....\'-.._('e_-c- \e "-5 . Not Approved
C-o~-"""-'~~~'o
0
~ Sv~~~~ ~ ,S"u'-'fl._,'\
\
P 1'Pe.)
<:;....\ \ \
0~ SOB, 2{. •'•°ljbeeJ.
~ ll 0 Not Required
Design Consultant (Name): Signature: f<. ;;;~. Rcv'd By:
~ / \

\Date:
Date:
Corrections or comments made relative to submittals during this review do not relieve the contractor from compliance with the
requirements of The Contract. This check is only for review of general conformance with the des[.g_ll.Son~.epLof.-theproject-aM-g:eneral
compliance with the information given in the contract documents. The contractor is resporfslblejqr confirminq-and: i;;ofi'elating all
quantities and dimensions, selecting fabrication processes and techniques of construction, coordjna~(il§ii/s work with .that .cif 8fher \rades
and performing his work in a safe and satisfactory manner. \ t\r'i::;;< '·'·' · .r.. ... , ·:; · ", :· . • ,_ • !
 ATTESTATION OF CONFORMITY
ISSUED TO : MODERN PLASTIC INDUSTRIES LLC
P.O. Box 31550, Dubai Investment Park, Dubai, UAE

PRODUCT(S) DESCRIPTION : Plastic piping systems for non-pressure underground drainage and
sewerage – un plasticized poly (vinyl chloride) (PVC-U) as per the
scope mentioned in BSI Kitemark Certificate No. KM86777

MANUFACTURED BY : MODERN PLASTIC INDUSTRIES LLC

P.O. Box 31550, Dubai Investment Park, Dubai, UAE

APPLICABLE STANDARD SPECIFICATIONS / : BS EN 1401-1

REQUIREMENTS

CONFORMITY CERTIFICATE DETAILS

CERTIFICATE NUMBER : KM 86777

CERTIFICATE TITLE : BSI Kitemark Certificate

ISSUED BY : BSI

ISSUED TO : MODERN PLASTIC INDUSTRIES LLC

EVALUATION REPORT NO : RA21060149

ATTESTATION
Dubai Central Laboratory Department hereby attests that the product(s) described above
conforms to the requirements of the applicable standard specifications /requirements.

This attestation is based solely on the review and verification of the validity and authenticity of the Product Conformity
Certificate and as per Evaluation Report as mentioned above. This attestation shall not be used when the Product
Conformity Certificate becomes invalid at any time.

ARIF HUSAIN AL MARZOOQI Attestation No: VA19060064

Products Conformity Assessment Section Manager Original Issue Date: 23 September 2019
Dubai Central Laboratory Department Current Issue Date: 23 September 2021
Valid Up To: 22 September 2022

This Attestation of Conformity is in accordance with Certification Scheme Type N as described in ISO/IEC 17067: 2012
“Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes.”

This Attestation is an electronic document and shall not be reproduced except in full. Any alteration shall invalidate this document.
The Evaluation Report mentioned above including its attachments forms an integral part of this Attestation.

DM-DCLD-F-IC-6002 R5
OPEN DATA / ‫بيانات مفتوحة‬
1.0 NO OBJECTION TO PROPOSED MAKE SUBJECT TO CLIENT'S ACCEPTANCE.
2.0 CONTRACTOR IS RESPONSIBLE FOR MATERIAL TAKE-OFF AND PROPER HANDLING.
3.0 PROVIDE SAMPLE.

14 SEPTEMBER 2019
RAMESES DEMANO
B
 Shoeb 18/05/19
1. Upvc pipes & fittings shall be as per BS 5252 & Upvc solvent weld pipes &
fittings shall be as per BS 1329-1. However, attached reply from manufacturer
shows complying with BS 1401-4 & BS 5255 submit supporting document for
clarification.
2. Submit below ground Upvc pipes & fittings operating temperature , coefficent of
expansion details etc..
3. Follow below ground Upvc pipes & fittings installation detail as per IFC Drg ref.
DMCC-WSP-XX-ZZ-DR-PHE-00032 & 00033.
4. Submit method statement prior to start of work at site and ensure to follow below
ground drainage pipes slope as per Drg ref. WSP-XX-ZZ-DR-PHE-00032 & 00010.
5. Ensure all below ground Upvc pipes & fittings are Red terracotta colour and all
the pipes fitting, push fit rings & solvent is from same manufacturer.
6. Submit schedule where proposed Upvc below ground drainage pipes & fittings
installed. However, as agreed in VE few areas HDPE pipes & fittings is used.
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
GRANDE B4, RESIDENTIAL BUILDING DUBAI WSP CSCEC
CIEL TOWER DUBAI NORR CRCC
GRANDE B4, RESIDENTIAL BUILDING DUBAI WSP CSCEC
MAG EYE MEYDAN DUBAI PARSONS MAG INTERNATIONAL
MAG-EYE MEYDAN (546 TOWN
DUBAI PARSONS MASS ENGINEERING
HOUSES)
ADNOC GROUP SERVICE HUB ABU DHABI AL SUWEIDI RELICANCE CONTRACTING
ZADA TOWER (4B+G+3P+26 FLOORS
DUBAI GULF ENGINEERING REMCO
RESIDENTIAL BUILDING)
2B+G+M+2P+HC+21FLOORS+LR+UR
DUBAI NEB AL MADAEN
RESIDENTIAL BUILDING
KIZAD LIFE SCIENCE PARK (VACCINE ENGINEERING
ABU DHABI CSCEC
FACTORY) CONSULTANTS (ECG)
BANIYAS NORTH DEVELOPMENT ABU DHABI PARSONS / MOTT NATIONAL PROJECT
CRITICAL WAREHOUSING CAPACITY
ABU DHABI SDV NATIONAL PROJECT
ENHANCEMENT - KIZAD
CONSTRUCTION OF TROJAN LABOUR ARCHITECTURE AND
ABU DHABI ROYAL ADVANCE
CAMP PLANNING
VILLAS IN AL FALAH TOWN CENTER ABU DHABI MOTT ROYAL ADVANCE
AZIZI RIVIERA AT MEYDAN DUBAI 360 GARDINIA
MADINAT JUMEIRAH LIVING DUBAI DSA ARCHITECTS SAIFCO
MARSA AL ARAB DUBAI ATK AL SHAFAR UNITED
DCH PALACE DUBAI GAJ AL SHAFAR UNITED
SEA WORLD ABU DHABI AECOM ALEC/ AL SHAFAR UNITED
MAA QUAY WALL VILLAS DUBAI WME SAIFCO
VERA RESIDENTIAL APARTMENTS ENGINEERING
DUBAI MBM
B+G+3P+25+ROOF CONSORTIUM
SHARJAH SUSTAINABLE CITY SHARJAH ARIF & BINTOAK ROYAL RITZ
G+3 GEMS AL KHALEEJ NATIONAL
DUBAI GREEN CONCEPT BOWYER WICK
SCHOOL
GATE HOUSES & POOL HOUSES-
DUBAI WS ATKINS ALI MOOSA
VILLANOVA
B+G+8+R RESIDENTIAL BUILDING DUBAI AL AJMI TECHNOMECH
DEIRA WATERFRONT DEVELOPMENT
DUBAI AE7 TRINITY
PLOT12
ABU DHABI FUTURE SCHOOL ALTORATH
AL AIN NAEL
PROGRAM PHASE 7 PACKAGE 03 INTERNATIONAL
THE AKOYA OXYGEN 455 VILLAS,
DUBAI CONIN MBM
CAVILI CLUSTER
PROPOSED AL DHIYAFA RESIDENTIAL
DUBAI ARKITEKNIK AL HUDAIBA
DEVELOPMENT
6B+G+51 RESIDENTIAL TOWER DUBAI` LACASA PRIME STAR
WAVEZ BY DANUBE DUBAI NEB ROSE CITY
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
RESIDENTIAL BUILDING 8 NOS AND
TOWNHOUSES 148 NOS FOR MAG CITY, DUBAI VX STUDIO DYNAMIC DELTA
PHASE 1
96 TOWNHOUSES IN SECTOR R11B –
MARBELLA VILLAGE IN DUBAI SPORTS DUBAI KHATIB & ALAMI ROYAL ADVANCE
CITY
DESIGN & DEVELOPMENT OF OUD
DUBAI NEB RAQ
METHA, SATWA BUS STATION
OPERA DISTRICT PLOTS B1B2 DUBAI KEO CSCEC
HESSA TOWER B+G+3P+16F DUBAI KHATIB & ALAMO MAC
ROVE LA MER HOTEL DUBAI ARCHGROUP NATIONAL PROJECT
AL MAMSHA 33 NOS. BUILDING SHARJAH LACECO AL HAMAD
PARK HEIGHTS – I & II DUBAI KHATIB & ALAMI SHAPOORJI
THE FIELDS-1028 VILLAS DUBAI DATUM / AQLEH GBH INTERNATIONAL
BELLA ROSE DUBAI CONIN CONDOR
G+3P+21+R COMMERCIAL &
RESIDENTIAL BUILDING
DUBAI CUBIC ANWAR AL AQSA
NASMA RESIDENCE PHASE 3 DUBAI ARCADIA INTERMASS
EXPO 2020 – MOBILITY PAVILION DUBAI WSP ALEC
AL KHAIL GATE INTERNATIONAL DUBAI PARSONS POWER POINT
ICON BAY RESIDENTIAL DUBAI WME ROYAL ADVANCE
REEM DEVELOPMENT PHASE2 – MIRA
DUBAI NEB TROJAN
OASIS TOWNHOUSES 1393 NOS
REEM DEVELOPMENT– MIRA
DUBAI BH.NS ARABTEC
TOWNHOUSES (COMMUNITY 1, 2, 3 & 4)
DUBAI CREEK HARBOUR GATE2 DUBAI NORR TRINITY
ACT 1 & ACT 2 TOWRES DUBAI ARCHGROUP RELIANCE
SOCIO PARK HEIGHTS III
DUBAI RICE PERRY DUBCO
(B+G+13+MECH. FLOOR),
MBR GARDENS – DUBAI HILLS, SIDRA 3 DUBAI AL GURG TROJAN
DOWNTOWN VIEWS II DUBAI ARCHGROUP CSCEC
THE COVE DUBAI HOLDFORDS SOBHA
AL ZAHIA RESIDENTIAL SHARJAH BIN DALMOUK/DSA VERGER
AKOYA OXYGEN PHASE 1 - 547 VILLAS DUBAI KEO DELTA EMIRATES
NEW YORK UNIVERSITY ABU DHABI WSP BK GULF
SOFITEL HOTEL & RESORTS PALM
DUBAI MIRK CONSULTANTS BK GULF
JUMEIRAH
AL THURATH ENG.
G+37 - OLAGANA TOWER DUBAI DELTA EMIRATES
CONSULTANTS
G+27 - 2 BLDGS. AL FATTAN TOWER,
DUBAI AE7 CONSULTANCY DELTA EMIRATES
UMM RAMOOL
1582 VILLAS - MIRA COMMUNITY,
DUBAI TURNER EFECO / ARABTECH
EMMAR
1500- MEYDAAN VILLAS DUBAI AE7 CONSULTANCY MS CONSTRUCTION
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
1050 VILLA TOWN SQUARE
DUBAI ARIF & BINTOAK BEAVER GULF
DEVELOPMENT, NASHAMA
FALCON
NEW PASSENGER CREW TERMINAL DUBAI ATKINS
ELECTROMECHANICAL
DUBAI DOWNTOWN DEVELOPMENT - RELIANCE
DUBAI WSP
TROLLEY SYSTEM PHASE 1 A ELECTROMECHANICAL
DWTC PHASE 1 DUBAI WSP VOLTAS
G + 20 & G + 30 BLGD. SAHARA 4 & CONSULTAIR ENGINEERS
SHARJAH ETA MNE
SAHARA 5 & CONSULTANTS
JAMES L WILLIAM MIDDLE
AL MARYAH CENTRAL ABU DHABI WSP
EAST
G + 15 - 2 BUILDINGS - TANMIYAT
DUBAI AL AJMI CONSULTANTS PEPCO ENGINEERING
GLOBAL
DESIGN CENTER
G + 15 BLDG. - AL JEDDAF DUBAI RADIANT MEP
CONSULTANTS
AL HASHEMI ENG. AL SHIRAWI
G+7 - 8 BLDGS. - TIJARA TOWN DUBAI
CONSULTANTS ELECTROMECHANICAL
AL SHIRAWI
G+6 - 12 BLDGS. - ARMY BUILDING DUBAI ARIF & BINTOAK
ELECTROMECHANICAL
MIRK
G+6 - 6 BLDGS. - ARMY BUILDING SHARJAH ARIF & BINTOAK
ELECTROMECHANICAL
AKAR TECHNICAL
G+6 - 6 BLDGS. - ARMY BUILDING ABU DHABI ARIF & BINTOAK
SERVICES
SHAPOORJI PALLONJI
MIRDIFF HOUSING PROJECT DUBAI ARIF & BINTOAK
MIDEAST
SHAPOORJI PALLONJI
404 VILLAS - MUDON PHASE II SHARJAH ARIF & BINTOAK
MIDEAST
BIN LAHEJ
G+30 - WADI TOWER - CITY OF ARABIA DUBAI MEECON
ELECTROMECHANICAL
GODWIN AUSTIN AL SHIRAWI
ARCADIA SCHOOL DUBAI
JOHNSON ARCHITECTS ELECTROMECHANICAL
AL ZEINA BLDGS. FOR ALDAR ABU DHABI PELL FRISHMANN B K GULF
SHEIKH MUBARAK BIN LAHEJ
2B+G+6 BLDG., AL BARSHA DUBAI
ARCHITECTURAL ELECTROMECHANICAL
JAMES L WILLIAMS
G+4 BLDG. - ETIHAD AIRWAYS ABU DHABI PELL FRISHMANN
ELECTROMECHANICAL
G + 24, DREAM TOWER - DUBAI NATIONAL ENGINEERING
DUBAI MAG INTERNATIONAL
MARINA BUREAU
G + 22, WEST AVENUE TOWER DUBAI NATIONAL ENGINEERING PRIME STAR
DUBAI
MARINA BUREAU ELECTROMECHANICAL
BLUESKY
150 VILLA - JUMEIRAH VILLAGE DUBAI DAR
ELECTROMECHANICAL
AL SHIRAWI
105 VILLA - JUMEIRAH VILLAGE DUBAI DAR
ELECTROMECHANICAL
POWERPOINT
505 VILLA - JUMEIRAH VILLAGE DUBAI DAR
ELECTROMECHANICAL
G+20, DELTA TOWER I & II DUBAI
DUBAI NEB UNITED MASTER
MARINA
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
EMAL SMELTER COMPLEX ABU DHABI SNC LAVALIN LAING O'RURKEE
HABSHAN SULPHUR PLANT ABU DHABI GASCO DODSAL ENGINEERING
LID PLANT & 4 LAKES DUBAI IN HOUSE ENGINEERS OFFICE
RELIANCE
MEENA PLAZA BLDGS. ABU DHABI NEB
ELECTROMECHANICAL
RELIANCE
101 TOWER - DUBAI MARINA DUBAI NEB
ELECTROMECHANICAL
105 VILLA - PALMAROASA, PALM
DUBAI DAR AL HAMAAD CONTRACTING
JUMEIRAH
105 VILLA - DIC DUBAI AL HAWRAA ENG. EVERSAFE GENERAL CONT
505 VILLA - THE LEGENDS DUBAI AL BURJ CONSULTANTS DELTA EMIRATES
DM IRRIGATION PROJECTS DUBAI DUBAI MUNICIPALITY DESERT LANDSCAPE
DM IRRIGATION PROJECTS DUBAI DUBAI MUNICIPALITY GREENSCAPES
DM IRRIGATION PROJECTS DUBAI DUBAI MUNICIPALITY PROSCAPE LANDSCAPING
HILLS & FORT
DM IRRIGATION PROJECTS DUBAI DUBAI MUNICIPALITY
LANDSCAPING
ARCHITECTURAL BIN SHAFAR
MARINA BAY ABU DHABI
ENGINEERING GROUP ELECTROMECHANICAL
COMMERCIAL CENTRE / MOSQUE
DUBAI AREX CONSULTANTS SEIDCO GENERAL
FALCON CITY OF WONDERS
G+37 - M TOWER ABU DHABI AL EWAN ENG. GALAXY ADVANCED
G + 50 BLDG. - DUJA TOWER DUBAI NEB RADIANT MEP
G + 25 - SPORTS CITY DUBAI AL HAWRAA ENG. EGYCO CONTRACTING
SKY CENTRAL HOTEL - TEECOM DUBAI AL HAWRAA ENG. STERLING MEP
300 VILLAS - MEERAS DUBAI ARIF & BINTOAK SHAPOORJI PALLONJI
C-14 HOTEL APARTMENTS &
DUBAI NEB RADIANT MEP
RESIDENCES - PALM JUMEIRAH
AL AHLI CLUB BLDG. DUBAI NEB AL NABOODAH
G + 7 - 4 BLDGS. - LIWAN DUBAI NEB AL HANI CONTRACTING
EMIRATES PARK HOTEL DUBAI BILT MIDDLE EAST
TROJAN GENERAL
HYDRA VILLAS ABU DHABI NEB
CONTRACTING
CORAL TOWER DUBAI ARJ CONSTRUCTION
G + 24 BLDG. SHARJAH MANOLYA CONSTRUCTION
AL BAWARDY
SPINNEYS & AL SEER WAREHOUSE DUBAI IN HOUSE
ENGINEERING
MAMMUT BUILDING
PREFAB BUILDINGS DUBAI IN HOUSE
SYSTEMS
G + 25 - 2 BUILDINGS SHARJAH NEB STERLING MEP
ST. REGIS HOTEL - LANDSCAPE DUBAI KHATIB & ALAMI GULF LANDSCAPE - 5 STAR
AKOYA LANDSCAPE WORKS DUBAI AECOM GREEN RANCHES
380 VILLA AIN AL FAYDA - PHASE 2 AL AIN AL SALAAM ENG. CREST POWER
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
AJMAN BANK BLDG. AJMAN AJ DESIGN UNITED SEVEN
G+8+ ROOF BLDG. SILICON OASIS DUBAI MIMAR ENG. SENSAIRE ELEC.
B+G+2P+7 HOTEL APARTMENTS DUBAI ABDUL RAHIM ARCHITEC JAMS CONTRACTING
B+G+6 BLDG. DUBAI GERMAN ENGINEERING. PRECISION STAR
G+7 GOLF APARTMENTS (G19, G20, &
SEIDCO GENERAL
G21 - (3 CLUSTERS) @ AKOYA BY DUBAI AECOM
CONTRACTING
DAMAC
PLOT RS6-C4-AL REEM ISLAND ABU DHABI KN INTERNATIONAL GULF CONTRACTORS
ARABIAN RANCHES 2
GULF LANDSCAPE &
DEVELOPMENT, RASHA - DUBAI PARSONS
IRRIGATION SYSTEMS LLC
LANDSCAPE WORKS-PACKAGE 9
KHALIFA UNIVERSITY EXTENSION ABU DHABI ELITE DESIGN FIBREX
MAMSHA AL SAADIYAT, PHASE-1 ABU DHABI DEWAN ARCHITECTS SWIFTLINE
B+G+1 FLOORS SHOPPING CENTRE –
DUBAI WME CONSULTANTS HAYDON MEP LLC
SPRINGS 7
GRAND VIEWS – ROAD & UTILITIES CHAWLA GBH INTERNATIONAL
DUBAI
INFRASTRUCTURE ARCHITECTURAL CONTRACTING
MANAZEL AL REEF 2 VILLA
ABU DHABI DORSCH GRUPPE FIBREX
DEVELOPMENT
DIP-AL YALAYIS ROUNDABOUT FOR AL BAYADER IRRIGATION
DUBAI KHATIB & ALAMI
DIP @ HEADQUARTER ENTRANCE AND CONTRACTING LLC
CONSTRUCTION OF AL-RAQAYEB
AJMAN DORCH CONSULT ELMA
SERVICE STATION IN AJMAN
DPAM-0013 – AL KHAIL GATE
PARSONS OVERSEAS
INTERNATIONAL PLOT DUBAI POWER POINT
LIMITED
DEVELOPMENT
B+G+4 (4 NOS) RESIDENTIAL CVTEC CONSULTING
DUBAI AL MABNA CONTRACTING
BUILDING ENGINEERS
PT-175 TECOM BUSINESS PARKS
AL BAYADER IRRIGATION
GATE DESIGN, ENHANCEMENT & DUBAI AECOM
AND CONTRACTING LLC
BRANDING
3B+G+P+15 RESIDENTIAL BUILDING DUBAI DESIGN CENTER ADNAN CONTRACTING L.L.C
G+1 (ONE TYPE 5 VILLAS) DUBAI ERGA PROGRESS KHJ CONTRACTING L.L.C
DUBAI WHOLE CITY SPINE ROAD EMIRATES ROAD
DUB|AI AECOM
STAGE-1 CONTRACTING
G+5+15 TYP+R SHARJAH VISION ENGINEERING MODERN BUILDING
DEIRA WATER FRONT
DUBAI AE7 CONSULTANCY SHINRYO CORPORATION
DEVELOPMENT
MEYDAN BEACH HOTEL – MOCK UP DUBAI AE7 CONSULTANCY FIBREX
MAG 5 BOULEVARD RESIDENTIAL
DUBAI AL JABAL ENGG. FUJAIRAH NATIONAL
BUILDING
B+G+M+1 COMMERCIAL BUILDING DUBAI LACASA ARCHITECTS SEMCO
TOWN SQUARE DEVELOPMENT DUBAI PARSONS GULF LANDSCAPE
G+3P+19 STORY RESIDENTIAL
DUBAI LACASA ARCHITECTS BIN LAHEJ
BUILDING
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CONTRACTOR
NATIONAL ENGINEERING SOBHA ENGG. &
DUBAI HILLS :MBR-DH-ACACIA 1 DUBAI
BUREAU CONTRACTING
DESIGN & CONSTRUCT 3D PRINTED
CONVERGNT VALUE
LAB BUILDING AND ASSOCIATED DUBAI DEWA
ENGINEERING
WORKS
DEWAN ARCHITECTS & VERGER DELPORTE UAE
SERENA BELLA CASA DUBAI
ENGINEERS LTD
MUDON DEVELOPMENT PHASE 3 - TROJAN GENERAL
DUBAI NAGA
ARABELLA 1 CONTRACTING
DEVELOPMENT OF MASJID PARK DUBAI DUBAI MUNICIPALITY HILLS & FORT LANDSCAPE
IR207 AUTOMATIC IRRIGATION
SYSTEM FOR SHK. KHALIFA
FUJAIRAH DUBAI MUNICIPALITY HILLS & FORT LANDSCAPE
EXPRESS WAY AT FUJAIRAH
ENTRANCE
NAD EL SHIBA 4TH SEWERAGE &
DRAINAGE (C617) GRAVITY DUBAI MWH NAEL CONSTRUCTION
NETWORK
G+4 LABOUR ACCOMMODATION JEBEL ALI AL KHAWAJAH C J TEC CONTRACTING LLC
CONSTRUCTION OF 1338 VILLAS-
DUBAI ATK ENGINEERING EFECO
VILLANOVA
DUBAI CREEK HARBOUR
DUBAI HOLFORDS ASSOCIATES SOBHA ENGINEERING
DEVELOPMENT - THE COVE
DUBAI CREEK HARBOUR -
GROUP CONSULTANT ROYAL ADVANCE
HARBOUR GATE PROJECT, PLOT DUBAI
INTERNATIONAL-GCI ELECTROMECHANICAL
A030
CONVERSION
CENTARA RESORT, DEIRA ISLAND DUBAI DAR AL-HANDASAH
ELECTROMECHANICAL CO.
AE7 ENGINEERING
MEYDAN ONE MALL DUBAI MS CONSTRUCTION LLC FZ
CONSULTANT
RESIDENTIAL BUILDING
DUBAI VE EXPERTS TECH ENGINEERING LLC
(5B+G+30+ROOF) - AHAD TOWER
(B+G+M+63F) TOWER + (B+G+9F+R) NATIONAL ENGINEERING AL ITTIHAD
DUBAI
PARKING BUILDING – “A” TOWER BUREAU (NEB) ELECTROMECHANICAL CO.
4B+G+M+4P+44+MECH+ROOF AL HAWRAA
DUBAI HEAT&POWER LLC
“CORPORATE TOWER” ENGINEERING
SHAMS DEVELOPMENT REEM UNII ENGINEERING POWERSPRAY
ABU DHABI
TOWER 1 & 2 CONSULTANCY ELECTROMECHANICAL
REMRAAM RESIDENTIAL ATK ENGINEERING
DUBAI DELTA AL EMARATE
BUILDINGS PHASE 2B CONSULTANT
EMIRATES NUCLEAR
BARAKAH NUCLEAR POWER PLANT ABU DHABI SEMCO
ENERGY CORPORATION
INTERNAL & LINK ROADS –
DUBAI CORE ENGINEERING AL NUAIMI
SOUTHERN ZONE
WAHAT AL ZAWEYA
ABU DHABI HYDER PRIME ENGINEERING
DEVELOPMENT
SHK. KHALIFA BIN ZAYED AL
AL AIN ICON TWAM AGRICULTURE
NAHYAN MASJED
ONE AT PALM JUMEIRAH DUBAI AREX PLAFOND
JEBEL ALI SEWAGE TREATMENT
DUBAI AECOM LARSEN & TOUBRO
PLAT PHASE 2
 LIST OF PROJECTS
PROJECT LOCATION CONSULTANT CUSTOMER
AL QUSAIS RESIDENTIAL
DUBAI SCHUSTER PECHTOLD TECH ENGINEERING LLC
DEVELOPMENT (WASL)
G+4P+12+HC NATIONAL ENGINEERING RADIANT TECHNICAL
DUBAI
COMMERCIAL/RESIDENTIAL BUREAU WORKS
RESIDENTIAL COMPOUND (38 ARCHITECTURAL &
DUBAI BUILDX
VILLAS) ENGINEERING
DUBAI SOUTH MALL DUBAI ATKINS EFECO
MBR GARDENS-MAPLE 2 – 666 NO TROJAN GENERAL
DUBAI ARIF & BINTOAK
TOWN HOUSES CONTRACTING
HEADQUARTERS OFFICE COMPLEX
@ DUBAI BIOTECHNOLOGY & DUBAI KLING CONSULT / CRACKNELL AL BAYADER
RESEARCH PARK
AL KHAWAJAH ENGINEERING
G+2P+10 TYP+GYM+ROOF DUBAI BECON CONSTRUCTION
CONSULTANCY
JAMES L WILLIAMS
ONE JLT - G + 27 TOWER, TEECOM DUBAI ARIF & BINTOAK
ELECTROMECHANICAL
HALCROW INTERNATIONAL / JAMES L WILLIAMS
PEARL DIVING POOL DUBAI
RTA ELECTROMECHANICAL
CONVERSION
247 VILLA - JUMEIRAH PARK DUBAI DAR / SHAIR & PARTNERS
ELECTROMECHANICAL
CONVERSION
IBN BATTUTA HOTEL DUBAI ARCH GROUP
ELECTROMECHANICAL
G + 27 - OPUS TOWERS DUBAI CLARKE SAMADIN HAYDON MEP
G + 20 BLDG. SPORTS CITY DUBAI ARCH GROUP SOBHA CONTRACTING
RESIDENTIAL & COMMERCIAL
DUBAI ARCHGROUP SHAPOORJI
TOWER
IR 173 – IRRIGATION SYSTEM FOR
INTERCHANGE OF SH.
DUBAI PARSONS GREEN SCAPES
MOHAMMAD BIN ZAYED ROAD
WITH AL REBAT ROAD
THE STERLING DUBAI ARKIPLAN AL HANI GULF CONT CO.
G + 15 - 8 BUILDINGS - TANMIYAT
DUBAI AL AJMI CONSULTANTS DELTA EMIRATES
GLOBAL