Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    QSH-P4B Honda CBR1000RR 2008-2011

    Uploaded by

    djoten
    This 3-step document provides instructions for installing a QuickShifter easy kit on a 2008-2011 Honda CBR1000RR motorcycle. The steps are: 1) Remove various body panels and components including the fuel tank and airbox. 2) Plug the QuickShifter connectors in-line with the ignition coil connectors. 3) Connect the QuickShifter black wire to chassis ground and mount the sensor on the gearbox.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    QSH-P4B Honda CBR1000RR 2008-2011

    Uploaded by

    djoten
    19 views3 pages
    This 3-step document provides instructions for installing a QuickShifter easy kit on a 2008-2011 Honda CBR1000RR motorcycle. The steps are: 1) Remove various body panels and components including the fuel tank and airbox. 2) Plug the QuickShifter connectors in-line with the ignition coil connectors. 3) Connect the QuickShifter black wire to chassis ground and mount the sensor on the gearbox.

    Original Title

    QSH-P4B__Honda_CBR1000RR__2008-2011

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This 3-step document provides instructions for installing a QuickShifter easy kit on a 2008-2011 Honda CBR1000RR motorcycle. The steps are: 1) Remove various body panels and components including the fuel tank and airbox. 2) Plug the QuickShifter connectors in-line with the ignition coil connectors. 3) Connect the QuickShifter black wire to chassis ground and mount the sensor on the gearbox.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views3 pages

    QSH-P4B Honda CBR1000RR 2008-2011

    Uploaded by

    djoten
    This 3-step document provides instructions for installing a QuickShifter easy kit on a 2008-2011 Honda CBR1000RR motorcycle. The steps are: 1) Remove various body panels and components including the fuel tank and airbox. 2) Plug the QuickShifter connectors in-line with the ignition coil connectors. 3) Connect the QuickShifter black wire to chassis ground and mount the sensor on the gearbox.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    QuickShifter easy

    Supplementary Manual
    Honda CBR1000RR 2008-2011 (iQSE-1 + QSH-P4B)

    Remove the frame covers below the


    main seat.

    Remove the main seat.

    Remove the fuel tank cover.

    www.healtech-electronics.com 1/3
    QuickShifter easy
    Supplementary Manual
    Honda CBR1000RR 2008-2011 (iQSE-1 + QSH-P4B)

    Remove the fuel tank.

    Remove the airbox.

    Plug the QSH connectors in-line with the

    ignition coil connectors.

    (White, 2-pole connectors below the airbox)

    www.healtech-electronics.com 2/3
    QuickShifter easy
    Supplementary Manual
    Honda CBR1000RR 2008-2011 (iQSE-1 + QSH-P4B)

    Connect the QSH Black wire terminal to


    the chassis ground.

    Mount the QSE sensor.

    (Replace the bolt with the one supplied.

    Place the conical washers at the two sides

    of the sensor like this: (0). Tighten the bolt

    in this position by about 6 Nm. If you do not

    have torque wrench, tighten the bolt until


    the shift arm is tight on the gearbox shaft.)

    Typical position for the QuickShifter easy.

    Secure the unit properly.

    www.healtech-electronics.com 3/3

    You might also like