LT21665
LT21665
LT21665
• Allows for simple visual LENTON LOCK works as a one-step transition on ASTM (in-lb) and metric rebar.
inspection For Canadian rebar sizes, contact ERICO for transition compatibility.
• Works as one-step
transition on ASTM The completed connection performs similar to a continuous piece of rebar.
(in-lb) and metric rebar In testing, the couplers demonstrated less than 0.0039 in (0.10 mm) of slip.
Patent no.
7,107,735 / 7,093,402.
Additional patents in
other countries.
LENTON LOCK ®
REBAR
SLEEVE
Coupler Average
Outside Inside Number
Rebar Designation Part Length (L) Weight Socket Size Torque All
Diameter (d) Diameter of Bolts
Number Bolts
Inch- Metric* Canada Soft in mm in mm in mm lb kg in mm ft-lb N-m
Lb* Metric (a) (b) (a) (b)
- 10 - 10 LL12B1 5.0 127 1.25 29 0.6 15 1.5 0.6 1/2 13 150 205 6
#4 12 10 M 13 LL12B1 5.0 127 1.25 29 0.6 15 1.5 0.6 1/2 13 150 205 6
- 14 - - LL16B1 6.3 159 1.38 35 0.7 19 2.0 0.9 1/2 13 150 205 6
#5 16 15 M 16 LL16B1 6.3 159 1.38 35 0.7 19 2.0 0.9 1/2 13 150 205 6
- 18 - - LL20B1 7.5 191 1.75 44 0.9 24 3.8 1.7 1/2 13 150 205 8
#6 20 20 M 19 LL20B1 7.5 191 1.75 44 0.9 24 3.8 1.7 1/2 13 150 205 8
#7 22 - 22 LL22B1 8.7 222 1.88 48 1.1 28 4.9 2.3 5/8 16 250 340 8
#8 25 25 M 25 LL25B1 10.0 254 2.13 54 1.2 30 7.4 3.4 5/8 16 350 475 8
#9 28 30 M 29 LL28B1 11.3 287 2.38 60 1.3 34 10.2 4.6 5/8 16 350 475 10
- 30 - - LL28B1 11.3 287 2.38 60 1.3 34 10.2 4.6 5/8 16 350 475 10
#10 32 - 32 LL32B1 12.7 323 2.50 65 1.5 38 12.2 5.9 13/16 21 500 680 8
- 34 - - LL36B1 14.1 358 2.75 72 1.7 43 15.8 7.9 13/16 21 550 750 10
#11 36 35 M 36 LL36B1 14.1 358 2.75 72 1.7 43 15.8 7.9 13/16 21 550 750 10
- 38 - - LL40B1 15.7 400 3.25 80 1.9 47 26.1 10.9 13/16 21 580 790 12
- 40 - - LL40B1 15.7 400 3.25 80 1.9 47 26.1 10.9 13/16 21 580 790 12
(a) Product produced from standard imperial material diameters (inch). (b) Product produced from standard metric material (mm).
NOTES
* Works as one-step transition.
• Dimensions shown in chart are typical. Bolt length may vary after the bolt heads are sheared off.
• When using air impact wrench check the air pressure, torque rating and air flow requirements before starting installations.
• Refer to installation instructions for information on DIN slip or Caltrans Ultimate Splice requirements.
• Refer to complete installation instructions provided with the product or available at www.erico.com before commencing installation.
WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO
customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death.
ACI is a registered trademark of the American Concrete Institute. IBC is a registered trademark of the International Code Council. UBC is a registered trademark of the International Conference of
Building Officials.
Copyright ©2009, 2010 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
www.erico.com