Week 2

MODULE 2
USE OF HEAT IN
COOKING
Teacher : Louchelle Macasasa Mamento

FSM112 – Food Selection and preparation
Reporters :
Dumato, Sittie Gaela S.
Mayo , Jehanie
USE OF HEAT IN COOKING
Heat is used in preparing food by cooking and toasting. Cooking is
the term applied when heating affects the entire mass of food, while
toasting concerns primarily the effects of heat on the surface. Without heat,
foods that are unpalatable or unsanitary when raw could not be in- cluded
in the daily diet. The changes produced in foods by heat depend upon the
methods of heat transfer, the time of heating, the temperature reached in
the surface and within the mass of food, and the nature of food itself.
Method of Heat Transfer
Heat transfer from the sources of heat to the food are by convection,
conduction, radiation and microwave emission. These factors affect the
intensity and the rate of cooking.
1. Convection is the transfer of thermal energy from electricity, gas or
solid fuel to the vapor molecules of the air, which in turn heat the food or
the utensil it comes in contact with.
Convection combines conduction heat transfer and circulation to
force molecules in the air to move from warmer areas to cooler
ones. As the molecules closest to the heat source become warm,
they rise and are replaced by unheated molecules. There are two
types of convection.
 Natural Convection
Natural convection occurs when molecules at the bottom of a cooking vessel rise
and warm while cooler and heavier molecules sink. This creates a circulating
current that evenly distributes heat throughout the the substance being prepared.
For example, when a pot of water is placed on the stove to boil, conduction
transfers heat from the pot and into the water molecules in contact with the interior
of the pot. As these molecules heat, convection causes them to move away from
the interior of the pot as they are replaced by cooler molecules. This continuous
current creates convection heat transfer within the water.
 Mechanical Convection
Mechanical convection occurs when outside forces circulate heat, which shortens
cooking times and cooks food more evenly. Examples of this include stirring liquid
in a pot or when a convection oven uses a fan and exhaust system to blow hot air
over and around the food before venting it back out.
Examples of Convection Cooking
Here are a few examples of how heat transfer via convection works:
 Water coming to a boil and circulating in the pot

 Running cold water over frozen food, which transfers heat into the food
to thaw it more quickly
 Room temperature air moving around frozen food to thaw it
2. Conduction is the direct transfer of heat via metals or any heat-

conducing materials containing the food. In the conduction, heat
penetrates the center of the food. Good conductor of heat are metals,
copper, water and steam, and air.
3. Radiation is the transfer of heat from a red hot coil to the food. It
immediately heats the food it strokes on. The process can be blocked
by an obstacle between the source and the object to be heated.
In the world of cooking, radiation is the process where heat and light waves strike
and penetrate your food. As such, there is no direct contact between the heat source
and the cooking food. There are two main radiant heat cooking methods: infrared
and microwave radiation.
 Infrared Radiation
Infrared radiation utilizes an electric or ceramic heating element that gives off
electromagnetic energy waves. These waves travel in any direction at the speed of
light to quickly heat food, and are mainly absorbed at the surface of whatever
you're preparing. Examples of things that create infrared radiation are glowing
coals in a fire, toaster ovens, and broilers.
 Microwave Radiation
Microwave radiation utilizes short, high-frequency waves that penetrate food,

which agitates its water molecules to create friction and transfer heat. If you're
heating a solid substance, this heat energy is transferred throughout the food
through conduction, while liquids do so through convection. Microwave heat
transfer usually cooks food faster than infrared radiation, as it is able to penetrate
foods several inches deep. Keep in mind that microwave radiation works best when
cooking small batches of food.
Examples of Radiation Cooking
Here are a few examples of how heat transfer via radiation works:
 Warming your hands over a fire
 Lying in the sun to get warm
 Heating up dinner in the microwave
IMPORTANT TEMPERATURES IN PREPARING FOODS

Module 2 “
___________1. It occurs when molecules at the bottom of a cooking vessel rise
and warm while cooler and heavier molecules sink.
___________2. is the direct transfer of heat via metals or any heat- conducing
materials containing the food.
___________3. occurs when outside forces circulate heat, which shortens cooking
times and cooks’ food more evenly.
___________4. is used in preparing food by cooking and toasting.
___________5. utilizes short, high-frequency waves that penetrate food, which
agitates its water molecules to create friction and transfer heat.
ESSAY:
1. Why do we need to cook our food ? (minimum of 150 words)
2. What are the three models of heat transfer?

Week 2

Uploaded by

Copyright:

Available Formats

Week 2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Week 2

Uploaded by

Copyright:

Available Formats

MODULE 2

Teacher : Louchelle Macasasa Mamento

 Water coming to a boil and circulating in the pot

2. Conduction is the direct transfer of heat via metals or any heat-

Microwave radiation utilizes short, high-frequency waves that penetrate food,

Examples of Radiation Cooking

IMPORTANT TEMPERATURES IN PREPARING FOODS

You might also like