microduo and microdur (only for walls )

NON ABSORBENT SUPPORTS ABSORBENT / PLASTERBOARD ABSORBENT /CEMENT

1 Apply MICRODUO or MICRODUR BASE on joints 1 1ª coat PRIMER 100 1 1ª coat PRIMER 100
24 hours 30 minutes 30 minutes
Sand with 40 grain
2 1ª coat MICRODUO o MICRODUR BASE without pigment and fiber mesh 2 1ª coat MICRODUO o MICRODUR BASE without pigment and fiber mesh
2 1ª coat PRIMER 100 with fiber mesh 3 hours 3 hours
30 minutes / 24 hours maximum Sand with 40 grain Sand with 40 grain
3 1ª coat MICRODUO o MICRODUR BASE without pigment 3 2ª coat MICRODUO o MICRODUR BASE with pigment 3 2ª coat MICRODUO o MICRODUR BASE with pigment
12 hours 3 hours 3 hours
Sand with 40 grain Sand with 40 grain Sand with 40 grain
4 2ª mano PRIMER 100 4 1ª coat MICRODUO o MICRODUR FINE with pigment 4 1ª coat MICRODUO o MICRODUR FINE with pigment
30 minutes 3 hours 3 hours
Sand with 120/220** Sand with 120/220**
5 2ª coat MICRODUO o MICRODUR BASE with pigment
24 hours 5 2ª coat MICRODUO o MICRODUR FINE with pigment 5 2ª coat MICRODUO o MICRODUR FINE with pigment
Sand with 40 grain 24 hours 24 hours
Sand with 120/220** Sand with 120/220**
6 1ª coat MICRODUO o MICRODUR FINE with pigment
3 hours 6 1ª coat HYDROPRIMER CI o HARD SEALER 6 1ª coat HYDROPRIMER CI o HARD SEALER
Sand with 120/220** 4 hours 4 hours
7 2ª coat MICRODUO o MICRODUR FINE with pigment 7 2ª coat HYDROPRIMER CI o HARD SEALER 7 2ª coat HYDROPRIMER CI o HARD SEALER
24 hours 4 hours 4 hours
Sand with 120/220** Sand with 400 Sand with 400
8 1ª coat HYDROPRIMER CI o HARD SEALER 8 1ª coat AQUAMAX DUR 8 1ª coat AQUAMAX DUR
4 hours 12 hours 12 hours
Sand with 400 Sand with 400
9 2ª coat HIDROPRIMER CI o HARD SEALER
4 hours 9 2ª coat AQUAMAX DUR 9 2ª coat AQUAMAX DUR
Sand with 400
10 1ª coat AQUAMAX DUR
12 hours
Sand with 400
11 2ª coat AQUAMAX DUR

DONT APPLY FRESH ON FRESH

DRYING TIME MAY VARY DEPENDING ON THE TEMPERATURE AND HUMIDITY

DRYING TIME ONE WEEK
DONT COVER AND WET FOR TWO WEEKS

MIXER AND CONSUM

PRIMER 100 HYDROPRIMER CI HARD SEALER IMPRIPOX

Comsum: 0,10 l/m2 Comsum: 2 coat - 0,12 l/m2 Comsum: 2 coat - 0,10 l/m2 Vapor barrier: 2 coats - 0,25 Kg/m2
Vapor barrier for capillarity: 2 coats - 3,35 Kg/m2
MICRODUO BASE MICRODUO FINO
Substitute primer 100 for IMPRIPOX, and continue with procces
Comsum: 2 coat - 2,00 Kg/m2 Comsum: 2 coat - 0,50 / 0,60 Kg/m2
Mix: 10 Kg. - 3,00 L Resin Mix: 10 Kg. - 4,80 L Resin
1ª coats IMPRIPOX
AQUAMAX DUR 24 hours
MICRODUR BASE MICRODUR FINO 2ª coats IMPRIPOX with fiber mesh
Comsum: 2 coat - 0,50 / 0,60 Kg/m2 Comsum: 2 coat - 0,15 l/m2
Comsum: 2 coat - 2,00 Kg/m2 3 - 4 hours
Mix: 10 Kg. - 4,50 L water Mix: 5L (A) - 1 L (B)
Mix: 10 Kg. - 3,00 L water

•Recomended good ventilation. * Dont apply fresh on fresh. •Detail inform in TDS
** 120: sand with machine / 220: sand by hand.
 microduo and microdur (floor and walls)

NON ABSORBENT / CERAMIC * WITH JOINTS NON ABSORBENT / STONE AND MARBLE ABSORBENT / SELF LEVELLING

1 Apply MICRODUO o MICRODUR BASE on joints 1 1ªcoat PRIMER 100 with fiber mesh 1 Fill the craks with MICRODUO o MICRODUR BASE
24 hours 30 minutos 24 hours
Sand with 40 Sand with 40
2 1ª coat MICRODUO o MICRODUR BASE sin pigmento
2 1ª coat PRIMER 100 with fiber mesh 3 hours 2 1ª coat PRIMER 100
30 minutes / 24 hours maximum Sand with 40 30 minutos
3 1ª coat MICRODUO o MICRODUR BASE without pigment 3 2ª coat MICRODUO o MICRODUR BASE with pigment 3 1ª coat MICRODUO o MICRODUR BASE without pigment and fiber mesh
12 hours 3 hours 3 hours
Sand with 40 Sand with 40 Sand with 40
4 2ª coat PRIMER 100 4 1ª coat MICRODUO o MICRODUR MEDIUM with pigment 4 2ª coat MICRODUO o MICRODUR BASE with pigment
30 minutes / 24 hours maximum 3 - 6 hours 3 hours
Sand with 80 Sand with 40
5 2ª coat MICRODUO o MICRODUR BASE with pigment
24 hours 5 2ª coat MICRODUO o MICRODUR MEDIUM with pigment 5 1ª coat MICRODUO o MICRODUR MEDIUM with pigment
Sand with 40 24 hours 3 hours
Sand with 80 Sand with 80
6 1ª coat MICRODUO o MICRODUR MEDIUM with pigment
3 - 6 hours 6 1ª coat HYDROPRIMER CI o HARD SEALER 6 2ª coat MICRODUO o MICRODUR MEDIUM with pigment
Sand with 80 4 hours 24 hours
Sand with 80
7 2ª coat MICRODUO o MICRODUR MEDIUM with pigment 7 2ª coat HYDROPRIMER CI o HARD SEALER
24 hours 4 hours 7 1ª coat HYDROPRIMER CI o HARD SEALER
Sand with 80 Sand with 400 4 hours
8 1ª coat HYDROPRIMER CI o HARD SEALER 8 1ª coat AQUAMAX DUR o AQUAMAX EXTREME 8 2ª coat HYDROPRIMER CI o HARD SEALER
4 hours 12 hours 12 hours
Sand with 400 Sand with 400
9 2ª coat HYDROPRIMER CI o HARD SEALER
12 hours 9 2ª coat AQUAMAX DUR o AQUAMAX EXTREME 9 1ª coat AQUAMAX DUR o AQUAMAX EXTREME
Sand with 400 12 hours
Sand with 400
10 1ª coat AQUAMAX DUR o AQUAMAX EXTREME
12 hours 10 2ª coat AQUAMAX DUR o AQUAMAX EXTREME
Sand with 400
11 2ª coat AQUAMAX DUR o AQUAMAX EXTREME

DONT APPLY FRESH ON FRESH

DRYING TIME MAY VARY DEPENDING ON THE TEMPERATURE AND HUMIDITY

DRYING TIME ONE WEEK
DONT COVER AND WET FOR TWO WEEKS

MIXER AND CONSUM

IMPRIPOX
PRIMER 100 HYDROPRIMER CI HARD SEALER Barrera de vapor: 2 manos - 0,25 Kg/m2
Comsum: 0,10 l/m2 Comsum: 2 coat - 0,12 l/m2 Comsum: 2 coat - 0,10 l/m2 Barrera de humedad por capilaridad: 2 manos - 3,35 Kg/m2

MICRODUO BASE MICRODUO MEDIUM MICRODUR MEDIUM Si usa primero el Impripox como barrera de vapor, siga el proceso normal
Comsum: 2 coat - 2,00 Kg/m2 Comsum: 2 coat - 0,50 / 0,60 Kg/m2 Comsum: 2 coat - 0,50 / 0,60 Kg/m2 reemplazando la aplicación principal con:
Mix: 10 Kg. - 3 L Resin Mix: 10 Kg. - 4 L Resin Mix: 10 Kg. - 4 L water
1ª mano IMPRIPOX
MICRODUR BASE AQUAMAX DUR AQUAMAX EXTREME 24 horas
Comsum: 2 coat - 2,00 Kg/m2 Comsum: 2 coat - 0,15 l/m2 Comsum: 2 coat - 0,15 l/m2 2ª mano IMPRIPOX con malla
Mix: 10 Kg. - 3 L water Mix: 5L (A) - 1 L (B) Mix: 5L (A) - 1 L (B) 3 - 4 horas

•Recomended good ventilation. * Dont apply fresh on fresh. •Detail inform in TDS
 microduo and microdur (exterior)

NON ABSORBENT / CERAMIC * ABSORBENT / CONCRETE

1 Apply MICRODUO o MICRODUR BASE on joints 1 1ª coat PRIMER 100

24 hours 30 minutes
Sand with 40
3 1ª coat MICRODUO o MICRODUR BASE without pigment and fiber mesh
2 1ª coat PRIMER 100 with fiber mesh 24 hours
30 minutes / 24 hours maximum Sand with 40
3 1ª coat MICRODUO o MICRODUR BASE without pigment 4 1ª coat MICRODUR FINE BASE with pigment
24 hours 3 - 6 hours
Sand with 40 Sand with 40
4 2ª coat PRIMER 100 6 2ª coat MICRODUR FINE BASE with pigment
30 minutes / 24 hours maximum 24 hours
Sand with 80
5 1ª coat MICRODUR FINE BASE with pigment
3 - 6 hours 7 1ª coat HYDROPRIMER CI
Sand with 40 4 hours
6 2ª coat MICRODUR FINE BASE with pigment 8 2ª coat HYDROPRIMER CI
24 hours 4 hours
Sand with 40 Sand with 400
7 1ª coat HYDROPRIMER CI 9 1ª coat AQUAMAX EXTREME
4 hours 12 hours
Sand with 400
8 2ª coat HYDROPRIMER CI
4 hours 10 2ª coat AQUAMAX EXTREME
Sand with 400

9 1ª coat AQUAMAX EXTREME

12 hours
Sand with 400
10 2ª coat AQUAMAX EXTREME

DRYING TIME MAY VARY DEPENDING ON THE TEMPERATURE AND HUMIDITY

DRYING TIME ONE WEEK
DONT COVER AND WET FOR TWO WEEKS

MIXER AND CONSUM

PRIMER 100 HYDROPRIMER CI IMPRIPOX

Comsum: 0,10 l/m2 Comsum: 2 coat - 0,12 l/m2 Vapor barrier: 2 coats - 0,25 Kg/m2
Vapor barrier for capillarity: 2 coats - 3,35 Kg/m2
MICRODUO BASE MICRODUR FINE BASE
Substitute primer 100 for IMPRIPOX, and continue with procces
Comsum: 2 coat - 2,00 Kg/m2 Comsum: 2 coat - 1,20 Kg/m2
Mix: 10 Kg. - 3 L Resin Mix: 10 Kg. - 3,50 L water
1ª coats IMPRIPOX
24 hours
MICRODUR BASE AQUAMAX EXTREME
2ª coats IMPRIPOX with fiber mesh
Comsum: 2 coat - 2,00 Kg/m2 Comsum: 2 coat - 0,15 l/m2
3 - 4 hours
Mix: 10 Kg. - 3 L water Mix: 5L (A) - 1 L (B)

•Recomended good ventilation. * Dont apply fresh on fresh. •Detail inform in TDS