Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Oring 327 - 0.210x1.725in or 5.33x43.82mm - AC30 Housing

    Uploaded by

    Hitzfits
    22 views1 page
    The document summarizes an O-ring selection for a radial piston seal application. It provides the operating temperature range, material properties, size specifications for the O-ring and housing groove dimensions. Analysis results show the recommended O-ring size code is 2-327, with expected compression between 12.9-19.4% and gland fill of 65.5-76.7%. Installation should provide a gap of 0.0015-0.0030 inches and deformation force between 52-109 pounds.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document summarizes an O-ring selection for a radial piston seal application. It provides the operating temperature range, material properties, size specifications for the O-ring and housing groove dimensions. Analysis results show the recommended O-ring size code is 2-327, with expected compression between 12.9-19.4% and gland fill of 65.5-76.7%. Installation should provide a gap of 0.0015-0.0030 inches and deformation force between 52-109 pounds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    22 views1 page

    Oring 327 - 0.210x1.725in or 5.33x43.82mm - AC30 Housing

    Uploaded by

    Hitzfits
    The document summarizes an O-ring selection for a radial piston seal application. It provides the operating temperature range, material properties, size specifications for the O-ring and housing groove dimensions. Analysis results show the recommended O-ring size code is 2-327, with expected compression between 12.9-19.4% and gland fill of 65.5-76.7%. Installation should provide a gap of 0.0015-0.0030 inches and deformation force between 52-109 pounds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    O-Ring Selector Region: North America Unit: inch

    Service Conditions & Defining Attributes

    Operating Temperature Minimum: 73°F Maximum: 73°F


    Polymer Group Acrylonitrile Butadiene Nitrile (NBR, XNBR)
    Seal Hardness 70 SHA
    Compound

    O-ring Size Code

    Hardware Configuration

    Sealing Case Radial - Piston Seal


    Application Static

    Thermal Expansion & Volume Swelling


    Seal Group default 112 × 10-6 / K
    Piston / Groove Inactive 0 × 10-6 / K
    Bore Inactive 0 × 10-6 / K
    Seal max. volume swell 0%

    Sizing Selection

    Back-up Rings Amount : 0 Width : inch


    O-ring Size Code 2-327
    OR Nominal Tolerance Limit Min Max
    ød1 Inner diameter 1.725 AS 568 ± 0.015 1.710 1.740 inch
    ød2 Cross section 0.210 AS 568 ± 0.005 0.205 0.215 inch
    Groove Nominal Lower Upper Min Max
    ød4 Bore 2.1250 0.0000 0.0020 2.1250 2.1270 inch
    ød9 Piston 2.1220 -0.0010 0.0000 2.1210 2.1220 inch
    ød3 Groove 1.7850 -0.0040 0.0000 1.7810 1.7850 inch
    b Width 0.2810 0.0000 0.0050 0.2810 0.2860 inch
    r Radius 0.0250 -0.0080 0.0080 0.0170 0.0330 inch

    Results

    Results Recommendation Concentric Eccentric


    Min Max Min Max
    t Depth + gap 0.1700 0.1730 0.1680 0.1760 inch
    s gap 0.0015 0.0030 0.0060 inch
    Stretch of OR inner-ø 0...6 2.4 4.4 %
    Compression of OR ød2 15...21 12.9 19.4 11.4 20.3 %
    Gland fill 60...90 65.5 76.7 %
    Total deformation force 52 109 lbf

    Notes

    Recommendations on application design and material selection are based on available technical data and are offered as suggestions only. Each user should make his own
    tests to determine the suitability for his own particular use. Parker offers no express or implied warranties concerning the form, fit, or function of a product in any
    application.

    Contact the US Application Engineers phone: 859-335-5101 email: OESmailbox@parker.com


    Contact the European Application Engineers phone: +49 7142 351-0 email: praedifa@parker.com

    You might also like