15.4.5 Lab - Explore Encryption Methods

Lab - Exploring Encryption Methods
Objectives
Part 1: Decipher a Pre-Encrypted Message Using the Vigenère Cipher
 Use an encrypted message, a cipher key, and the Vigenère cipher square to decipher the message.
Part 2: Create a Vigenère Cipher Encrypted Message and Decrypt It
 Work with a lab partner and agree on a secret password.
 Create a secret message using the Vigenère cipher and the key.
 Exchange messages and decipher them using the pre-shared key.
 Use an interactive Vigenère decoding tool to verify decryption.
Background
The Cisco IOS password encryption service uses a Cisco-proprietary algorithm that is based on the Vigenère
cipher. Vigenère is an example of a common type of cipher mechanism called polyalphabetic substitution.
Note: Students can work in teams of two for this lab.
Required Resources
Device with internet access
Instructions
Part 1: Decipher a Pre-Encrypted Message Using the Vigenère Cipher

In Part 1, you will analyze an encrypted message and decrypt it using a cipher key and the Vigenère cipher
square.
Step 1: Review the encrypted message.

The following message has been encrypted using the Vigenère cipher:
GGIATVWGQIR
Step 2: Review the cipher keyword.

The cipher keyword TCPIP was used to encrypt the message. The same keyword will be used to decrypt or
decipher the message.
© 2015 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 5 www.netacad.com
Step 3: Review the structure of the Vigenère square.

A standard Vigenère square or table is used with the keyword to decipher the message.
Step 4: Decrypt the message using the keyword and Vigenère square.
a. Use the table below to help you decrypt the message. Start by entering the letters of the encrypted
message in the second row of cells, from left to right.
b. Enter the keyword TCPIP in the top row, repeating the letters until there is a keyword letter for each letter
of the encrypted message, even if the keyword letters at the end do not represent the complete keyword.
c. Refer to the Vigenère square or table shown in Step 3 and find the horizontal row that starts with the first
letter of the keyword (the letter T). Scan across that row and locate the first letter of the encrypted
message in the row (the letter G). The letter at the top of the column where the encrypted message letter
appears is the first letter of the decrypted message (the letter N).
d. Continue this process until you have decrypted the entire message and enter it in row 3 of the following
table.
blank blank blank blank blank blank blank blank blank blank blank
Cipher
Keyword
Encrypted
Message
Decrypted
Message
Blank Line, No additional information
Part 2: Create a Vigenère Cipher-Encrypted Message and Decrypt It

In Part 2, work with a lab partner and agree on a secret password to use as the pre-shared key. Each lab
partner creates a secret message using the Vigenère cipher and the key. Partners exchange messages and
decipher them using their pre-shared key.
Note: If you do not have a partner, you can perform the steps yourself.
Step 1: Determine the cipher keyword.

Question:
With your partner, establish a cipher keyword and enter it here.

Type your answers here.
Step 2: Create a plain text message and encrypt it (both partners).

a. Create a plain text (decrypted) message to be encrypted by your partner.
Question:
Record it below.
b. You can use the following table to help you encrypt the message. You can enter the unencrypted
message and cipher keyword here, but do not let your partner see it.
c. In the Vigenère table, locate the row that starts with the first letter of the cipher keyword. Next locate the
first letter to be encrypted at the top of the column in the table. The point (cell) at which the table row (key
letter) and column (message letter) intersect is the first letter of the encrypted message. Continue this
process until you have encrypted the entire message.
Note: This table is limited to messages of 12 characters. You can create longer messages if desired.
Message encryption and decryption are not case-sensitive.
blank blank blank blank blank blank blank blank blank blank blank blank
Cipher
Keyword
Encrypted
Message
Decrypted
Message
Step 3: Decrypt the message from your partner.

a. You can use the following table to help you decrypt your partner’s encrypted message. Enter the
encrypted message from your partner and the cipher keyword.
b. Use the same procedure described in Part 1, Step 4.
Note: This table is limited to messages of 12 characters. You can create longer messages if desired.
Cipher
Keyword
Encrypted
Message
Decrypted
Message
Step 4: Use an interactive decryption tool to confirm decryption.

a. An internet search for “Vigenère decode” shows that various cipher encryption and decryption tools are
available. Many of these are interactive.
b. One interactive tool is located at http://sharkysoft.com/vigenere/1.0/. At this site, enter the encrypted
message from your partner in the top part of the screen and the cipher key in the middle. Click Decode to
see the clear text version of the message. You can also use this tool to encrypt messages.
c. The following example uses Sharky’s Vigenère Cipher tool to decode the encrypted message from Part 1.
Reflection
1. Could the Vigenère cipher be used to decode messages in the field without a computer?
2. Search the internet for Vigenère cipher cracking tools. Is the Vigenère cipher considered a strong encryption
system that is difficult to crack?
End of document

15.4.5 Lab - Explore Encryption Methods

Uploaded by

Copyright:

Available Formats

15.4.5 Lab - Explore Encryption Methods

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

15.4.5 Lab - Explore Encryption Methods

Uploaded by

Copyright:

Available Formats

Lab - Exploring Encryption Methods

Part 1: Decipher a Pre-Encrypted Message Using the Vigenère Cipher

Step 1: Review the encrypted message.

Step 2: Review the cipher keyword.

Step 3: Review the structure of the Vigenère square.

Part 2: Create a Vigenère Cipher-Encrypted Message and Decrypt It

Step 1: Determine the cipher keyword.

With your partner, establish a cipher keyword and enter it here.

Step 2: Create a plain text message and encrypt it (both partners).

Step 3: Decrypt the message from your partner.

Step 4: Use an interactive decryption tool to confirm decryption.

You might also like