SDS Nitomortar

Revision date: 27/02/2020 Revision: 1 Supersedes date: 22/04/2017
SAFETY DATA SHEET

NITOMORTAR S BASE
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier

Product name NITOMORTAR S BASE
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Base component of three-part epoxy mortar system.
1.3. Details of the supplier of the safety data sheet

Supplier Fosroc Chemical (India) Pvt. Ltd
Embassy Point, No 150, 2nd Floor,
Infantry Road,
Bangalore - 560001
+91 80 2355 1500/ 4252 1900
+91 80 2355 1510
1.4. Emergency telephone number

Emergency telephone +91 80 2355 1500/ 4252 1900
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture

Classification (EC 1272/2008)
Physical hazards Not Classified
Health hazards Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Skin Sens. 1 - H317
Environmental hazards Aquatic Chronic 2 - H411
2.2. Label elements
Hazard pictograms
Signal word Warning
Hazard statements H315 Causes skin irritation.

H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements P273 Avoid release to the environment.

P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/ attention.
P501 Dispose of contents/ container in accordance with national regulations.
1/10
NITOMORTAR S BASE
Contains reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight
≤ 700)
Supplementary precautionary P261 Avoid breathing vapour/ spray.

statements P264 Wash contaminated skin thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P321 Specific treatment (see medical advice on this label).
P332+P313 If skin irritation occurs: Get medical advice/ attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P391 Collect spillage.
2.3. Other hazards

This product does not contain any substances classified as PBT or vPvB.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin 60-100%

(number average molecular weight ≤ 700)
CAS number: 25068-38-6 EC number: 500-033-5 REACH registration number: 01-
2119456619-26-XXXX
Classification
Skin Irrit. 2 - H315
Eye Irrit. 2 - H319
Skin Sens. 1 - H317
Aquatic Chronic 2 - H411
DIBUTYL PHTHALATE <1%

CAS number: 84-74-2 EC number: 201-557-4
M factor (Acute) = 10 M factor (Chronic) = 10
Substance of very high concern (SVHC).
Classification
Acute Tox. 3 - H331
Repr. 1B - H360
Aquatic Acute 1 - H400
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
SECTION 4: First aid measures
4.1. Description of first aid measures

General information Move affected person to fresh air at once. Get medical attention if any discomfort continues.
Inhalation Move affected person to fresh air at once. Get medical attention. Move affected person to
fresh air and keep warm and at rest in a position comfortable for breathing. When breathing is
difficult, properly trained personnel may assist affected person by administering oxygen.
2/10
NITOMORTAR S BASE
Ingestion Do not induce vomiting. Never give anything by mouth to an unconscious person. If vomiting
occurs, the head should be kept low so that vomit does not enter the lungs. Give plenty of
water to drink. Get medical attention immediately. Move affected person to fresh air and keep
warm and at rest in a position comfortable for breathing.
Skin contact Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical
attention promptly if symptoms occur after washing.
Eye contact Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do.
Continue rinsing. Continue to rinse for at least 15 minutes and get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
General information The severity of the symptoms described will vary dependent on the concentration and the
length of exposure.
Inhalation May cause coughing and difficulties in breathing.
Ingestion The product irritates mucous membranes and may cause abdominal discomfort if swallowed.
Skin contact May cause irritation to skin as well as allergic rash.
Eye contact May cause severe eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media

Suitable extinguishing media Extinguish with the following media: Dry chemicals, sand, dolomite etc.
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
5.2. Special hazards arising from the substance or mixture

Specific hazards No specific hazard known.
Hazardous combustion Thermal decomposition or combustion products may include the following substances: Oxides
products of carbon.
5.3. Advice for firefighters

Protective actions during Avoid breathing fire gases or vapours. Cool containers exposed to flames with water until well
firefighting after the fire is out. Control run-off water by containing and keeping it out of sewers and
watercourses.
Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Wear protective clothing as described in Section 8 of this safety data sheet. Avoid contact with
skin and eyes.
6.2. Environmental precautions

Environmental precautions Avoid the spillage or runoff entering drains, sewers or watercourses.
6.3. Methods and material for containment and cleaning up
3/10
NITOMORTAR S BASE
Methods for cleaning up Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots,
clothing or apron, as appropriate. Absorb in vermiculite, dry sand or earth and place into
containers. Avoid the spillage or runoff entering drains, sewers or watercourses.
6.4. Reference to other sections

Reference to other sections For waste disposal, see Section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling

Usage precautions Avoid spilling. Avoid contact with skin and eyes. Provide adequate ventilation. Avoid inhalation
of vapours. Use approved respirator if air contamination is above an acceptable level.
7.2. Conditions for safe storage, including any incompatibilities

Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Storage class Chemical storage.
7.3. Specific end use(s)

Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure controls/Personal protection
8.1. Control parameters

Occupational exposure limits
DIBUTYL PHTHALATE
Long-term exposure limit (8-hour TWA): WEL 5 mg/m³
Short-term exposure limit (15-minute): WEL 10 mg/m³
WEL = Workplace Exposure Limit
Ingredient comments WEL = Workplace Exposure Limits
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700) (CAS:
25068-38-6)
DNEL Workers - Inhalation; Short term systemic effects: 12.25 mg/m³

Workers - Inhalation; Long term systemic effects: 12.25 mg/m³
PNEC - Fresh water; 0.006 mg/l
PRECIPITATED SILICA (CAS: 112926-00-8)
DNEL Workers - Inhalation; Long term systemic effects: 4 mg/m³
DIBUTYL PHTHALATE (CAS: 84-74-2)
DNEL Workers - Inhalation; Long term systemic effects: 0.13 mg/m³

Workers - Dermal; Long term systemic effects: 0.19 mg/kg bw/day
PNEC - Fresh water; 10 µg/l

- marine water; 1 µg/l
8.2. Exposure controls
4/10
NITOMORTAR S BASE
Protective equipment
Appropriate engineering Provide adequate general and local exhaust ventilation.

controls
Eye/face protection Wear tight-fitting, chemical splash goggles or face shield.
Hand protection Nitrile gloves are recommended.
Other skin and body Wear appropriate clothing to prevent any possibility of liquid contact and repeated or
protection prolonged vapour contact.
Hygiene measures Do not smoke in work area. Wash at the end of each work shift and before eating, smoking
and using the toilet. Promptly remove any clothing that becomes contaminated. Wash
promptly with soap and water if skin becomes contaminated. Use appropriate skin cream to
prevent drying of skin. When using do not eat, drink or smoke.
Respiratory protection If ventilation is inadequate, suitable respiratory protection must be worn. Gas filter, type A2.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties

Appearance Liquid.
Colour Black.
Odour Mild
Odour threshold Not determined.
Initial boiling point and range >200 ̊C
Relative density ~ 1.17 @ 20°C
Solubility(ies) Insoluble in Water
Viscosity 0.002 kcps @ 25°C
Explosive properties Not considered to be explosive.
Explosive under the influence Not considered to be explosive.

of a flame
Oxidising properties The mixture itself has not been tested but none of the ingredient substances meet the criteria
for classification as oxidising.
9.2. Other information

Other information Not determined.
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity The reactivity data for this product will be typical of those for the following class of materials:
Epoxides. Strong acids.
10.2. Chemical stability

Stability Stable at normal ambient temperatures.
10.3. Possibility of hazardous reactions
5/10
NITOMORTAR S BASE
Possibility of hazardous Under normal conditions of storage and use, no hazardous reactions will occur.
reactions
10.4. Conditions to avoid

Conditions to avoid Avoid excessive heat for prolonged periods of time.
10.5. Incompatible materials

Materials to avoid Acids. Bases Oxidising materials.
10.6. Hazardous decomposition products

Hazardous decomposition Fire creates: Toxic gases/vapours/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
products
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Ingestion Liquid irritates mucous membranes and may cause abdominal pain if swallowed.
Skin contact May cause Skin irritation as well allergic rashes on skin
Eye contact Severe irritation, burning and tearing.
Target organs Skin Eyes Respiratory system, lungs
Toxicological information on ingredients.
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700)
Acute toxicity - oral
Acute toxicity oral (LD₅₀ 5,000.0

mg/kg)
Species Rat
Notes (oral LD₅₀) NOAEL 750 mg/kg, Oral, Rat
ATE oral (mg/kg) 5,000.0
Acute toxicity - dermal
Acute toxicity dermal (LD₅₀ 20,000.0

mg/kg)
Species Rabbit
Notes (dermal LD₅₀) LD₅₀ >1600 mg/kg, Dermal, Rat
ATE dermal (mg/kg) 20,000.0
Skin corrosion/irritation
Animal data Rabbit Moderately irritating.
Skin sensitisation
Skin sensitisation May cause sensitisation by skin contact.
SECTION 12: Ecological information
6/10
NITOMORTAR S BASE
Ecotoxicity The product contains substances which are toxic to aquatic organisms and which may cause
long-term adverse effects in the aquatic environment.
12.1. Toxicity
Ecological information on ingredients.
Toxicity Ecotoxic to fish/daphnia/algae
Acute aquatic toxicity
Acute toxicity - fish LC₅₀, 96 hours: 3.6 mg/l, Leuciscus idus (Golden orfe)
LC₅₀, 96 hours: 2 mg/l, Oncorhynchus mykiss (Rainbow trout)
Acute toxicity - aquatic EC₅₀, 48 hours: 1.8 mg/l, Daphnia magna

invertebrates
Acute toxicity - aquatic EC50, 72 hours: 11 mg/l, Scenedesmus capricornutum (fresh water algae)
plants
12.2. Persistence and degradability

Persistence and degradability Expected to be not readily biodegradable.
Persistence and The product is not readily biodegradable.

degradability
12.3. Bioaccumulative potential

Bioaccumulative potential No data available on bioaccumulation.
Partition coefficient log Pow: 3.242
12.4. Mobility in soil

Mobility The product is insoluble in water.
Mobility The product has poor water-solubility.
Adsorption/desorption Water - Koc: 445 @ °C

coefficient
12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB This product does not contain any substances classified as PBT or vPvB.
assessment
7/10
NITOMORTAR S BASE
assessment
12.6. Other adverse effects

Other adverse effects None known.
SECTION 13: Disposal considerations
13.1. Waste treatment methods

General information The generation of waste should be minimised or avoided wherever possible.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.
SECTION 14: Transport information
14.1. UN number
UN No. (ADR/RID) 3082
UN No. (IMDG) 3082
UN No. (ICAO) 3082
UN No. (ADN) 3082
14.2. UN proper shipping name

Proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS reaction
(ADR/RID) product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700),
DIBUTYL PHTHALATE)
Proper shipping name (IMDG) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS reaction
product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700),
DIBUTYL PHTHALATE)
Proper shipping name (ICAO) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS reaction
DIBUTYL PHTHALATE)
Proper shipping name (ADN) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS reaction
DIBUTYL PHTHALATE)
14.3. Transport hazard class(es)

ADR/RID class 9
ADR/RID classification code M6
ADR/RID label 9
IMDG class 9
ICAO class/division 9
ADN class 9
Transport labels
14.4. Packing group
8/10
NITOMORTAR S BASE
ADR/RID packing group III
IMDG packing group III
ICAO packing group III
ADN packing group III
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutant
14.6. Special precautions for user

EmS F-A, S-F
ADR transport category 3
Emergency Action Code •3Z
Hazard Identification Number 90

(ADR/RID)
Tunnel restriction code (-)
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations The Manufacture, storage and import of hazardous chemicals rules 1989.
EU legislation Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Guidance Workplace Exposure Limits EH40.
15.2. Chemical safety assessment

No chemical safety assessment has been carried out.
SECTION 16: Other information
General information Only trained personnel should use this material. For professional users only.
Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.
Revision date 27/02/2020
Revision 1
Supersedes date 22/04/2017
SDS number 25356
9/10
NITOMORTAR S BASE
Hazard statements in full H315 Causes skin irritation.

H331 Toxic if inhaled.
H360 May damage fertility or the unborn child.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
The information on this data sheet represents our current data and is reliable provided that the product is used under the
prescribed conditions and in accordance with the application specified on the packaging and/or in the technical guidance
literature. Any other use of the product which involves using the product in combination with any other product or any other
process is the responsibility of the user.
10/10
Revision date: 28/02/2020 Revision: 00
SAFETY DATA SHEET

NITOMORTAR S FILLER

Product name NITOMORTAR S FILLER
Identified uses Filler component for Epoxy based Putty

Infantry Road,
Bangalore - 560001
+91 80 2355 1500/ 4252 1900
+91 80 2355 1510


Health hazards Not Classified
Environmental hazards Not Classified
2.2. Label elements

Hazard statements NC Not Classified
2.3. Other hazards

3.2. Mixtures
SILICA SAND 30-60%

Classification Classification (67/548/EEC or 1999/45/EC)

Not Classified -
1/6
NITOMORTAR S FILLER
QUARTZ (SiO2) 1-5%

Classification
Not Classified
Composition comments “This product does not contain any hazardous ingredients, or ingredients with national
workplace exposure limits”.

General information Consult a physician for specific advice.
Inhalation Remove person to fresh air and keep comfortable for breathing.
Ingestion Rinse mouth thoroughly with water.
Skin contact Rinse cautiously with water for several minutes.
Eye contact Rinse cautiously with water for several minutes.
length of exposure.
Ingestion May cause discomfort.
Skin contact Prolonged skin contact may cause redness and irritation.
Eye contact Prolonged contact may cause redness and/or tearing.
Notes for the doctor No specific recommendations.

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.

Hazardous combustion Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or
products vapours. Oxides of carbon.

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.

Personal precautions Avoid inhalation of dust. Avoid contact with eyes and prolonged skin contact. Wear protective
clothing as described in Section 8 of this safety data sheet.
2/6
NITOMORTAR S FILLER
Environmental precautions Avoid discharge into drains or watercourses or onto the ground.

Methods for cleaning up Avoid generation and spreading of dust. Collect and place in suitable waste disposal
containers and seal securely. Label the containers containing waste and contaminated
materials and remove from the area as soon as possible. Flush contaminated area with plenty
of water.

Reference to other sections For personal protection, see Section 8. For waste disposal, see Section 13.

Usage precautions Avoid inhalation of dust and contact with skin and eyes. Observe any occupational exposure
limits for the product or ingredients. Avoid inhalation of dust.

Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place. Keep only in
the original container.
Storage class Chemical storage.


Occupational exposure limits
SILICA SAND
Long-term exposure limit (8-hour TWA): TWA 0.1 mg/m³ (not whiskers) respirable dust
QUARTZ (SiO2)
Long-term exposure limit (8-hour TWA): WEL 0,1 mg/m³ Respirable crystalline silica
WEL = Workplace Exposure Limit
Ingredient comments No exposure limits known for ingredient(s).
Appropriate engineering Provide adequate ventilation. Avoid inhalation of dust. Observe any occupational exposure
controls limits for the product or ingredients.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. The following protection should be worn: Chemical splash goggles.
Hand protection Gloves are recommended for prolonged use. It is recommended that gloves are made of the
following material: Polyvinyl chloride (PVC). Rubber (natural, latex).
Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection
3/6
NITOMORTAR S FILLER
Hygiene measures Do not smoke in work area. Wash at the end of each work shift and before eating, smoking
and using the toilet. Wash promptly if skin becomes contaminated. Promptly remove any
clothing that becomes contaminated. When using do not eat, drink or smoke.
Respiratory protection Protection against nuisance dust must be used when the airborne concentration exceeds 10
mg/m3. Cartridge for organic steam with a pre-filter for particles, type AP2.

Appearance Solid
Colour Grey.
Odour Odourless.
pH Not applicable.
Melting point Not applicable.
Initial boiling point and range Not applicable.
Flash point Not applicable.
Relative density 1.07 @ 20°C
Solubility(ies) Insoluble in water.
Auto-ignition temperature Not applicable.
Explosive properties Not considered to be explosive.

of a flame
Oxidising properties Does not meet the criteria for classification as oxidising.

10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.

Stability Stable at normal ambient temperatures.

Possibility of hazardous No potentially hazardous reactions known.
reactions

Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.

Materials to avoid No specific material or group of materials is likely to react with the product to produce a
hazardous situation.
4/6
NITOMORTAR S FILLER
Hazardous decomposition No known hazardous decomposition products.

products

Toxicological effects Not regarded as a health or environmental hazard under current legislation.
General information No specific health hazards known.
Inhalation Dust may irritate the respiratory system. Symptoms following overexposure may include the
following: Coughing.
Ingestion May cause discomfort if swallowed.
Skin contact Prolonged and frequent contact may cause redness and irritation.
Eye contact Dust in the eyes will cause irritation.
Ecotoxicity The product is not expected to be hazardous to the environment.
12.1. Toxicity
Toxicity Not considered toxic to fish.

Persistence and degradability Expected to be readily biodegradable.

Bioaccumulative potential Not expected to be bioaccumulative.

Mobility The product is insoluble in water.

assessment


General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).
14.1. UN number
Not applicable.
5/6
NITOMORTAR S FILLER

Not applicable.

No transport warning sign required.
14.4. Packing group

Not applicable.

No.

Not applicable.
and the IBC Code
amended).
Guidance Workplace Exposure Limits EH40.

CHIP for everyone HSG228.
Approved Classification and Labelling Guide (Sixth edition) L131.
Safety Data Sheets for Substances and Preparations.

General information For professional use only. Only trained personnel should use this material.
Revision comments This is the first issue.
Revision 00
SDS number 28433
6/6
SAFETY DATA SHEET

NITOMORTAR S HARDENER

Product name NITOMORTAR S HARDENER
Identified uses Hardener component for epoxy resin mortar

Infantry Road,
Bangalore - 560001
+91 80 2355 1500/ 4252 1900
+91 80 2355 1510


Health hazards Acute Tox. 4 - H302 Acute Tox. 4 - H312 Skin Corr. 1B - H314 Eye Dam. 1 - H318 Skin Sens.
1 - H317
Environmental hazards Aquatic Chronic 3 - H412
2.2. Label elements
Hazard pictograms
Signal word Danger
Hazard statements H302+H312 Harmful if swallowed or in contact with skin.

H314 Causes severe skin burns and eye damage.
H412 Harmful to aquatic life with long lasting effects.
1/10
Precautionary statements P273 Avoid release to the environment.

P301+P312 IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.
Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/ attention.
P501 Dispose of contents/ container in accordance with national regulations.
Contains ISOPHORONEDIAMINE, BENZYL ALCOHOL, SALICYLIC ACID
Supplementary precautionary P260 Do not breathe vapour/ spray.

statements P261 Avoid breathing vapour/ spray.
P264 Wash contaminated skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a POISON CENTER/ doctor.
P321 Specific treatment (see medical advice on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
2.3. Other hazards

3.2. Mixtures
ISOPHORONEDIAMINE 30-60%
2119514687-32-xxxx
Classification
Acute Tox. 4 - H302
Acute Tox. 4 - H312
Skin Corr. 1B - H314
Eye Dam. 1 - H318
Skin Sens. 1 - H317
BENZYL ALCOHOL 30-60%

2119492630-38
Classification
Acute Tox. 4 - H302
Acute Tox. 4 - H332
Eye Irrit. 2 - H319
2/10
SALICYLIC ACID 1-5%

2119486984-17-XXXX
Classification
Acute Tox. 4 - H302
Eye Dam. 1 - H318

General information Consult a physician for specific advice.
Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing.
Ingestion Rinse mouth thoroughly with water. Do not induce vomiting.
Skin contact Rinse immediately with plenty of water. Continue to rinse for at least 10 minutes.
Eye contact Rinse with water. Continue to rinse for at least 15 minutes and get medical attention.
length of exposure.
Inhalation Dizziness. Difficulty in breathing.
Ingestion May cause chemical burns in mouth, oesophagus and stomach.
Skin contact May cause allergic reaction as well as serious Skin burns.
Eye contact Can cause serious Eye damage if come in contact
Notes for the doctor Treat symptomatically.

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media

Specific hazards Water used for fire extinguishing, which has been in contact with the product, may be
corrosive. No unusual fire or explosion hazards noted.
Hazardous combustion No known hazardous decomposition products.

products

Protective actions during No specific firefighting precautions known.
firefighting
Special protective equipment Use protective equipment appropriate for surrounding materials.
for firefighters
3/10

Personal precautions Avoid contact with eyes and prolonged skin contact.

Environmental precautions Collect and dispose of spillage as indicated in Section 13. Do not discharge into drains or
watercourses or onto the ground.

Methods for cleaning up Absorb in vermiculite, dry sand or earth and place into containers. Collect and dispose of
spillage as indicated in Section 13.

Reference to other sections For personal protection, see Section 8. For waste disposal, see Section 13.

Usage precautions Avoid contact with skin and eyes. Mechanical ventilation or local exhaust ventilation may be
required. Do not eat, drink or smoke when using this product.
Advice on general Wash hands and any other contaminated areas of the body with soap and water before
occupational hygiene leaving the work site.

Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Storage class Corrosive storage.

ISOPHORONEDIAMINE (CAS: 2855-13-2)
PNEC - marine water; 0.006 mg/l

- Fresh water; 0.06 mg/l
- Soil; 1.121 mg/kg
BENZYL ALCOHOL (CAS: 100-51-6)
DNEL Workers - Inhalation; Short term systemic effects: 110 mg/m³

Workers - Inhalation; Long term systemic effects: 22 mg/m³
Workers - Dermal; Short term systemic effects: 40 mg/kg bw/day
Workers - Dermal; Long term systemic effects: 8 mg/kg bw/day
PNEC - Fresh water; 1 mg/l

- marine water; 0.1 mg/l
- STP; 39 mg/l
SALICYLIC ACID (CAS: 69-72-7)
4/10
DNEL Workers - Inhalation; Long term systemic effects: 5 mg/m³

Workers - Dermal; Long term systemic effects: 2.3 mg/kg bw/day
Workers - Inhalation; Long term local effects: 5 mg/m³
General population - Inhalation; Long term systemic effects: 4 mg/m³
PNEC - Fresh water; 0.20 mg/l

- marine water; 0.020 mg/l
- Sediment (Freshwater); 1.42 mg/kg dw
- Soil; 0.17 mg/kg dw
- STP; 16.2 mg/l
Appropriate engineering Provide adequate general and local exhaust ventilation.

controls
Personal protection Wash hands and any other contaminated areas of the body with soap and water before
leaving the work site.
Eye/face protection Wear tight-fitting, chemical splash goggles or face shield. (conform EN 166)
Hand protection Nitrile gloves are recommended.
Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection
Hygiene measures Do not eat, drink or smoke when using this product.

Appearance Liquid.
Colour Straw.
Odour Amine.
Initial boiling point and range 220⁰ @ 1atm
Flash point 115⁰ C
Relative density ~ 1.080 g/cm3 @ 25°C
Solubility(ies) Insoluble in Water
Viscosity ~40 cP @ 25°C

of a flame
Oxidising properties Does not meet the criteria for classification as oxidising.

10.1. Reactivity
5/10
Reactivity The following materials may react with the product: Acids. Alkalis.

Stability Stable at normal ambient temperatures and when used as recommended.

Possibility of hazardous Under normal conditions of storage and use, no hazardous reactions will occur.
reactions

Conditions to avoid Avoid excessive heat for prolonged periods of time.

Materials to avoid Strong acids. Strong alkalis. Strong oxidising agents.

Hazardous decomposition Does not decompose when used and stored as recommended.
products

ATE oral (mg/kg) 695.27

Acute toxicity - inhalation

ATE inhalation (vapours mg/l) 28.13
Ingestion May be harmful if swallowed and enters airways.
Skin contact May cause allergic reaction as well as serious skin burns
Acute and chronic health Frequent inhalation of dust over a long period of time increases the risk of developing lung
hazards diseases.
Target organs Eyes, Lungs, Respiratory, Skin.
Toxicological information on ingredients.
ISOPHORONEDIAMINE

mg/kg)
Species Rat
6/10

mg/kg)
Species Rabbit
BENZYL ALCOHOL

mg/kg)
Species Rat
ATE oral (mg/kg) 1,620.0

mg/kg)
Species Rabbit
Acute toxicity inhalation 11.0

(LC₅₀ vapours mg/l)
Species Rat
ATE inhalation (vapours 11.0

mg/l)
Skin sensitisation
Skin sensitisation Not sensitising.
Carcinogenicity
Carcinogenicity NOAEL 200 mg/kg/day, Oral, Mouse There is no evidence that the product can
cause cancer.
Specific target organ toxicity - repeated exposure
STOT - repeated exposure NOAEL 400 mg/kg, Oral, Rat
Ingestion May cause burns in mucous membranes, throat, oesophagus and stomach.
Skin contact Prolonged and frequent contact may cause redness and irritation.
SALICYLIC ACID
Acute toxicity oral (LD₅₀ 891.0

mg/kg)
7/10
Species Rat
Notes (dermal LD₅₀) LD₅₀ >2000 mg/kg, Dermal, Rat
Notes (inhalation LC₅₀) LC50 >0.9 mg/l, Inhalation, Rat
Ecotoxicity The product contains a substance which is toxic to aquatic organisms and which may cause
long-term adverse effects in the aquatic environment.
12.1. Toxicity
Toxicity Expected to be ecotoxic to fish/daphnia/algae.
ISOPHORONEDIAMINE
Acute aquatic toxicity
Acute toxicity - fish LC₅₀, 96 hours: 110 mg/l, Fish
Acute toxicity - aquatic EC₅₀, 48 hours: 23 mg/l, Daphnia magna

invertebrates
Acute toxicity - aquatic IC₅₀, 72 hours: 50 mg/l, Algae

plants

Persistence and degradability Expected to be not readily biodegradable.
ISOPHORONEDIAMINE
Persistence and The product is not readily biodegradable.

degradability

Bioaccumulative potential No data available on bioaccumulation.
ISOPHORONEDIAMINE
Bioaccumulative potential The product does not contain any substances expected to be bioaccumulating.
Partition coefficient log Kow: 0.99

Mobility Insoluble in water.

assessment
8/10

14.1. UN number
UN No. (ADR/RID) 2289
UN No. (IMDG) 2289
UN No. (ICAO) 2289
UN No. (ADN) 2289

Proper shipping name ISOPHORONEDIAMINE
(ADR/RID)
Proper shipping name (IMDG) ISOPHORONEDIAMINE
Proper shipping name (ICAO) ISOPHORONEDIAMINE
Proper shipping name (ADN) ISOPHORONEDIAMINE

ADR/RID class 8
ADR/RID classification code C7
ADR/RID label 8
IMDG class 8
ICAO class/division 8
ADN class 8
Transport labels
14.4. Packing group

ADR/RID packing group III
IMDG packing group III
ICAO packing group III
ADN packing group III

No.
9/10

EmS F-A, S-B
ADR transport category 3
Emergency Action Code 2X
Hazard Identification Number 80

(ADR/RID)
Tunnel restriction code (E)
and the IBC Code
amended).

Abbreviations and acronyms IARC: International Agency for Research on Cancer.

used in the safety data sheet IATA: International Air Transport Association.
General information For professional use only. Only trained personnel should use this material.
Revision comments It is first ıssue.
Revision 00
SDS number 28076
Hazard statements in full H302 Harmful if swallowed.

H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H412 Harmful to aquatic life with long lasting effects.
10/10

SDS Nitomortar

Uploaded by

Copyright:

Available Formats

SDS Nitomortar

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SDS Nitomortar

Uploaded by

Copyright:

Available Formats

Revision date: 27/02/2020 Revision: 1 Supersedes date: 22/04/2017

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

1.3. Details of the supplier of the safety data sheet

1.4. Emergency telephone number

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Environmental hazards Aquatic Chronic 2 - H411

2.2. Label elements

Signal word Warning

Hazard statements H315 Causes skin irritation.

Precautionary statements P273 Avoid release to the environment.

Supplementary precautionary P261 Avoid breathing vapour/ spray.

2.3. Other hazards

SECTION 3: Composition/information on ingredients

reaction product: bisphenol-A-(epichlorhydrin) epoxy resin 60-100%

DIBUTYL PHTHALATE <1%

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation May cause coughing and difficulties in breathing.

Skin contact May cause irritation to skin as well as allergic rash.

Eye contact May cause severe eye irritation.

SECTION 5: Firefighting measures

5.1. Extinguishing media

5.2. Special hazards arising from the substance or mixture

5.3. Advice for firefighters

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

6.2. Environmental precautions

6.3. Methods and material for containment and cleaning up

6.4. Reference to other sections

SECTION 7: Handling and storage

7.1. Precautions for safe handling

7.2. Conditions for safe storage, including any incompatibilities

Storage class Chemical storage.

7.3. Specific end use(s)

SECTION 8: Exposure controls/Personal protection

8.1. Control parameters

Ingredient comments WEL = Workplace Exposure Limits

DNEL Workers - Inhalation; Short term systemic effects: 12.25 mg/m³

PNEC - Fresh water; 0.006 mg/l

PRECIPITATED SILICA (CAS: 112926-00-8)

DNEL Workers - Inhalation; Long term systemic effects: 4 mg/m³

DIBUTYL PHTHALATE (CAS: 84-74-2)

DNEL Workers - Inhalation; Long term systemic effects: 0.13 mg/m³

PNEC - Fresh water; 10 µg/l

8.2. Exposure controls

Appropriate engineering Provide adequate general and local exhaust ventilation.

Eye/face protection Wear tight-fitting, chemical splash goggles or face shield.

Hand protection Nitrile gloves are recommended.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Odour threshold Not determined.

Initial boiling point and range >200 ̊C

Relative density ~ 1.17 @ 20°C

Solubility(ies) Insoluble in Water

Viscosity 0.002 kcps @ 25°C

Explosive properties Not considered to be explosive.