Freecom2plus PDF
Freecom2plus PDF
Freecom2plus PDF
TECHNOLOGY
For easy reference while on the road, download the Pocket Guide from www.cardosystems.com/support/.
This is version 1.0 of the FREECOM 1+/2+ Manual. The latest version of the manual in your preferred language
and various tutorials can be found at cardosystems.com/support/.
Register your FREECOM 1+/2+
Registering your device allows you to download software patches, enjoy new features that are offered from time
to time, and most importantly, assures smooth handling of any warranty issues you may have. In the future, your
registered FREECOM 1+/2+ may also be eligible for free product upgrades.
It's easy, just visit www.cardosystems.com/cardo-community and you'll be done in no time. Also, rest assured:
Cardo does not share your details with others.
Be SMART, register your FREECOM 1+/2+.
2
CONTENTS
1. Introduction 4
2. Getting Started 5
2.1 Getting to Know Your FREECOM 1+/2+ 5
2.2 Charging the FREECOM 1+/2+ 5
2.3 Switching Your Unit On/Off 5
2.4 Using Your FREECOM 1+/2+ 6
2.5 Pairing Your Unit to Bluetooth Devices 6
3. On the Road 8
3.1 Basic AUDIO Functions 8
3.1.1 Making and Receiving Phone Calls 8
3.1.2 Streaming Music 9
3.2 Listening to FM Radio 10
4. Riding with Others 11
4.1 Bluetooth Intercom 11
4.2 Starting/Ending Intercom Calls 12
4.2.1 Receiving Bluetooth Intercom Calls 12
4.3 Resetting Bluetooth Intercom Pairing 12
4.4 Sharing Music and Radio 12
5. Troubleshooting 14
5.1 Soft Reset 14
5.2 Reset Pairing 14
5.3 Reset to Factory Settings 14
5.4 FAQ 14
6. Personalizing Your Device 15
6.1 Setting the Default Mobile Phone 16
6.2 Using Parallel Audio Streaming 16
6.3 Audio Source Priorities 17
Appendix A. FREECOM 1+/2+ LED Indications 18
7. Glossary 20
8. Support 21
3
1. INTRODUCTION
Thank you for choosing the Cardo FREECOM 1+/2+ communication and entertainment system for motorcycle
helmets.
We wish you a great FREECOM 1+/2+ experience and encourage you to write to us at
support@cardosystems.com regarding any questions, suggestions or comments you may have.
If you have not yet installed the FREECOM 1+/2+ unit on your helmet, please install it as described in the
Installation Guide provided in the package.
And don't forget to register your FREECOM 1+/2+ at www.cardosystems.com/cardo-community.
4
2. GETTING STARTED
Make sure that your FREECOM 1+/2+ battery is charged for at least 4 hours before initial use.
● Charging with the wall charger is faster than via a computer USB port.
● Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on.
(see Switching Your Unit On/Off on page 5).
5
To switch your FREECOM 1+/2+ off:
If you are pairing more than one device, Cardo recommends that you pair the mobile phone to channel 1, and
the additional device (such as GPS, music player or additional mobile phone) to channel 2.
If you are pairing the unit to more than one mobile phone, the phone paired with channel 1 is the default phone
for outgoing calls.
2. On the unit in standby mode, press for 5 seconds. The LED flashes red and blue.
3. Tap twice. The LED flashes red and green.
6
4. If you are pairing a GPS device, press .
The LED flashes slower.
5. On the device you are pairing, search for Bluetooth devices.
6. When your FREECOM 1+/2+ appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros).
The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
● If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
● If you have paired two different mobile phones directly to your FREECOM 1+/2+, set one as default for
making calls (see Setting the Default Mobile Phone on page 16).
● Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP) even if the phone has an MP3
player function. Consult your mobile phone’s user manual for more information.
● Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User
Manual for more information.
7
3. ON THE ROAD
FREECOM 1+/2+ makes it easy for you to receive phone calls and listen to music in a convenient and safe
manner.
3.1 BASIC AUDIO FUNCTIONS
The basic audio functions are the same whether you are listening to music, speaking on the intercom, or having a
phone conversation.
To turn the volume up:
● Tap .
An increasingly louder tone is played on the speaker until you reach the maximum volume, as indicated by
the maximum volume tone.
To turn the volume down:
● Tap .
An increasingly quieter tone is played on the speaker until you reach the minimum volume, as indicated by
the minimum volume tone.
To mute the microphone and lower the speaker volume to the minimal level:
● Tap or .
An ascending tone is played on the speaker.
3.1.1 MAKING AND RECEIVING PHONE CALLS
You can use your mobile phone to make and receive phone calls while paired to your FREECOM 1+/2+.
To make a phone call:
● To dial using your mobile phone's voice dial option, simultaneously tap and , then make your call as
● To dial your preset speed dial number, tap 3 times. (The speed dial number must be set in the Cardo
Mobile App or community website prior to use.)
● If you connected two mobile phones to your unit, you cannot make an additional phone call from the other
phone while a phone call is already active.
8
To answer a call:
● Tap .
To reject a call:
● Press for 2 seconds.
To ignore a call:
● Tap .
Your FREECOM 1+/2+ can toggle between two calls on two mobile phones when both mobile phones are paired
to your unit.
To toggle between two calls on two mobile phones (without disconnecting either call):
● Tap twice.
To disconnect the current call and switch to the other call:
● Tap .
● Tap .
To stop music streaming:
● Press for 2 seconds.
● Tap twice.
9
3.1.2.1 SWITCHING MUSIC SOURCES
If two music (A2DP) audio sources are paired, FREECOM 1+/2+ uses the audio source from which you last
played music.
To switch to the other audio source:
1. Stop music (A2DP) playback from the current device (see Streaming Music on page 9).
2. Play music (A2DP) from the other device.
FREECOM 1+/2+ automatically remembers your last played device.
3.2 LISTENING TO FM RADIO
The FREECOM 1+/2+ is equipped with a built-in FM radio.
To turn on the FM radio:
● Tap twice.
When you switch on your FM radio, the station that was playing when you last switched off resumes playing.
● Tap twice.
To scan for and select a station:
10
4. RIDING WITH OTHERS
● Pairing a channel replaces any existing paired unit on that channel with the new unit.
● If you purchased the FREECOM 1+/2+ DUO, the retail package contains two pre-paired units.
● The Intercom range with other models is limited to the distance of the unit with the shorter range.
If pairing is not completed within 2 minutes, the unit automatically returns to Standby mode.
11
If pairing is not completed within 2 minutes, the unit automatically returns to Standby mode.
● : Tap .
12
To start/stop sharing:
● While playing music (A2DP) or the FM radio on your unit, press for 2 seconds.
13
5. TROUBLESHOOTING
5.1 SOFT RESET
If your FREECOM 1+/2+ stops responding, reset it in one of these ways:
● Turning it off and then on again (see Getting Started on page 5).
● Using the supplied USB cable, connect your unit to the computer or wall charger for 30 seconds.
5.2 RESET PAIRING
This option deletes all paired units, devices and all configuration settings.
5.4 FAQ
Additional answers to common problems can be found at www.cardosystems.com/support.
14
6. PERSONALIZING YOUR DEVICE
Get the most out of your FREECOM 1+/2+ by changing the settings and customizing your unit according to your
own personal preferences, using either of the following methods:
● Cardo Mobile App on iOS or Android devices.
● Cardo Community on Windows / Mac - minimum requirements - Windows® 7 / Mac OS X 10.8
● Unit buttons.
Cardo recommends you customize your settings before going out on the road. You can adjust any of these
settings as required after experiencing them under road conditions.
15
Default Cardo Mobile App Cardo
Object Description
Value (iOS/Android) Community
Set speed dial numbers Empty Pre-set phone numbers for automatic ü ü
dialing.
Set the 6 FM radio 107.5 Pre-set FM radio stations. ü ü
presets
Spoken Status Enable Voice announcements inform you to whom ü ü
Announcements or to what device you are connected.
(Enable/Disable)
AGC performance may vary based on environmental conditions, including riding speed, helmet type,and
ambient noise.
If you do not set a default phone, the phone that you first paired with your unit is automatically set as the
default phone.
16
Parallel audio streaming may not work properly with some iOS devices (i.e., music player or GPS navigator)
due to connected device limitations.
Your FREECOM 1+/2+ sets the various audio sources to either foreground (volume remains the same) or
background (volume reduced) as described in the following table:
Foreground 3
1If you add an intercom call to a mobile phone call creating a conference call, the volume for both audio sources is
the same.
2If you play music only, the music volume is not reduced.
3If you play the FM radio only, the FM radio volume is not reduced.
In some cases, parallel audio streaming may not work properly due to connected device limitations (music
player or GPS navigator). For more information, see cardosystems.com/support.
You cannot use music sharing for voice audio during parallel audio streaming.
You can configure parallel audio streaming via the Cardo app or the Cardo Community.
6.3 AUDIO SOURCE PRIORITIES
If Parallel Audio Streaming is disabled, FREECOM 1+/2+ manages the audio sources you hear through the
speakers according to the following audio source priorities.
Priority Audio Source
If you pair your unit to two mobile phones (see Setting the Default Mobile Phone on page 16), music is shared
from the mobile phone through which you last played music.
17
APPENDIX A. FREECOM 1+/2+ LED INDICATIONS
Your FREECOM 1+/2+ operates in various modes. Each mode consists of a group of features currently available
for your use. For example, when FREECOM 1+/2+ plays music, it will be in music playing mode, enabling
features related to playing music such as skipping to the next and previous tracks.
Events are considered to occur whenever you operate a feature and when FREECOM 1+/2+ responds. For
example, turning on music is an event.
The device's current mode is indicated by the unit LEDs. You also hear voice announcements on your unit for
mode changes and events.
The following table shows LED indications for modes and events according to the current battery state.
18
LED Flashing Battery State Mode or Event
Red/Green Alternating fast Normal ● Pairing Mobile 2
Low Battery
Charging
Red/Green Alternating slow Normal, ● Pairing GPS 2
Low Battery
Yellow For 2 seconds Normal ● Intercom call attempted without
Low Battery microphone or audio kit connected
Charging
19
7. GLOSSARY
Term/Abbreviation Description
A2DP Advanced Audio Distribution Profile (for music). A protocol for playing
music over Bluetooth.
AGC sensitivity AGC (Automatic Gain Control) automatically adjusts speaker volume and
microphone sensitivity according to ambient noise and riding speed.
Device Mobile phone, GPS or music player.
Language Voice announcements and voice commands language.
Unit Cardo or non-Cardo Bluetooth Communication system.
Voice control Voice activation (by saying a word or phrase) of certain features for
hands-free operation.
Voice control sensitivity Adjusts your microphone sensitivity for voice activation while you are
riding.
20
8. SUPPORT
For additional information:
: www.cardosystems.com
* support@cardosystems.com
To avoid potential problems and to receive our support and warranty coverage, we strongly recommend buying
our products only from authorized Cardo dealers.
Your favorite brick-and-mortar store is always your best bet. Unauthorized online resellers and online auction
sites such as eBay are not among Cardo’s authorized dealers, and purchasing our products from such sites
will be at your own risk. Cardo strives to provide quality products and exceptional customer service. We
select dealers who share that vision. Buying grey market items from unauthorized online dealers is
counterproductive and also adversely affects unsuspecting online consumers who may be purchasing used,
counterfeit or defective products or devices whose warranties are void. Protect your investment by purchasing
genuine Cardo products only from authorized dealers.
21