Product Data

Castrol Hyspin AWS Range

Anti-wear hydraulic oil

Description
Castrol Hyspin™ AWS hydraulic oil range is based upon highly refined mineral oil enhanced with a stabilised zinc
additive system.

Application
Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven
additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has
excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition,
Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This
range is designed for use in industrial hydraulic systems which require anti-
wear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible
with the most commonly used nitrile, silicone and fluropolymer seal materials..

Hyspin AWS is classified as follows:

DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS (for appropriate viscosity grade) is approved by:

Parker Hannifin (Denison) HF0, HF1 & HF2
Eaton E-FDGN-TB002-E

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Fives Cincinnati P68, P69 & P70
ASTM D6158 HM
ISO 11158 HM
US Steel 126
GB 11118.1 L-HM (General and High Pressure)

Advantages
Hyspin AWS has the following advantages when compared to conventional hydraulic oils:-
Good thermal and oxidative stability. Oxidative stability reduces deposit formation, resulting in a cleaner system.
This can extend the machinery’s operating life.
Excellent anti-wear performance increases wear protection, which can help reduce downtime caused by
unscheduled maintenance.
Good filterability characteristics, including in the presence of water, enables cost savings to be made from
increased filter life and reduced maintenance.
Excellent water separation and hydrolytic stability, measured by industry standard testing. This increases
equipment reliability, helping to prolong the lubricant’s life and reduce downtime.

Page: 1/2
 Typical Characteristics
AWS AWS AWS AWS AWS AWS AWS AWS AWS
Name Method Units
10 15 22 32 46 68 100 150 220
ISO Viscosity Grade - - 10 15 22 32 46 68 100 150 220
ISO 12185 /
Density @ 15°C / 59°F kg/m³ 890 870 870 880 880 880 890 890 890
ASTM D4052
Kinematic Viscosity @ ISO 3104 /
mm²/s 10 15 22 32 46 68 100 150 220
40°C / 104°F ASTM D445
Kinematic Viscosity @ ISO 3104 /
mm²/s 2.4 3.2 4.3 5.3 6.7 8.6 11.1 14.5 18.7
100°C / 212°F ASTM D445
ISO 2909 /
Viscosity Index - - - >95 >95 >95 >95 >95 >95 >95
ASTM D2270
ISO 3016 / -36/ -33/ -27/ -27/ -24/ -21/ -18/ -15/ -12/
Pour Point °C/°F
ASTM D97 -33 -27 -17 -17 -11 -6 0 5 10
Foam Sequence I - ISO 6247 /
ml/ml 10/0 10/0 10/0 10/0 10/0 10/0 10/0 10/0 10/0
tendency / stability ASTM D892
Flash Point - open cup ISO 2592 / 170/ 195/ 205/ 210/ 215/ 225/ 225/ 230/ 255/
°C/°F
method ASTM D92 338 383 401 410 419 437 437 446 491
Flash Point - closed ISO 2719 / 145/ 160/ 170/ 200/ 200/ 220/ 220/ 220/ 230/
°C/°F
cup method ASTM D93 293 320 338 392 392 428 428 428 446
Water Separation @ ISO 6614 /
min 5 10 10 15 15 15 - - -
54°C / 129°F (40/37/3) ASTM D1401
Water Separation @ ISO 6614 /
min - - - - - - 15 20 20
82°C / 180°F (40/37/3) ASTM D1401
Air Release @ 50°C / ISO 9120 /
min 4 4 4 4 8 8 12 18 29
122°F ASTM D3427
Failure
FZG Gear Scuffing test
ISO 14635-1 Load - - - 11 12 12 12 12 12
- A/8.3/90
Stage
Rust test - distilled ISO 7120 /
- Pass Pass Pass Pass Pass Pass Pass Pass Pass
water (24 hrs) ASTM D665A
Rust test - synthetic ISO 7120 /
- Pass Pass Pass Pass Pass Pass Pass Pass Pass
seawater (24 hrs) ASTM D665B
Oxidation Stability - ISO 4263-1 /
hours - - - >2500 >2500 >2500 - - -
TOST ASTM D943
Subject to usual manufacturing tolerances.

Castrol Hyspin AWS Range

26 May 2020
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.

This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is
made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised
to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for the
intended application and to comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by either BP plc or its subsidiaries
for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of the
material. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.

Castrol Industrial, Technology Centre , Whitchurch Hill , Pangbourne , Reading , RG8 7QR , United Kingdom

http://msdspds.castrol.com

Page: 2/2