Catálogo Moderno Hyva PDF

FRONT END TIPPING SOLUTIONS
ALPHA WET KIT CATALOGUE
www.hyva.com
2
CONTENT
TIPPING SOLUTIONS INFORMATION .........................................................................4
OIL TANKS
140CMT01 - CRADLE MOUNTED TANKS ....................................................................7
140RMT01 - REAR MOUNTED TANKS.........................................................................9
140TMT01 - TOP MOUNTED TANKS ..........................................................................11
140SMT01 - SIDE MOUNTED TANKS ALPHA STANDARD........................................13
140SMT02 - SIDE MOUNTED TANKS ALPHA PLUS..................................................16
08102116 - HYVA AIR BREATHERS............................................................................19
RFILTE01 - HYVA RETURN FILTERS .........................................................................20
HYVA GEAR PUMP

145GPBRITE - HYVA GEAR PUMPS ..........................................................................21
HYVA TIPPING VALVES

HT-1150-TNK-SAE .......................................................................................................25
HT-1220-SAE ...............................................................................................................27
HT-1220-TNK ...............................................................................................................29
HT-2220-TNK ...............................................................................................................31
HYVA KNOCK-OFF
14700506 - KNOCK-OFF STANDARD.........................................................................33
14700575 - KNOCK-OFF HEAVY DUTY .....................................................................34
HYVA AIR CONTROLS

147AIR-51-52 AIR - CONTROLS ALU HOUSING........................................................35
021AIR-51-52 AIR - AIR CONTROL PLASTIC HOUSING ...........................................37
TECHNOLOGY ............................................................................................................39
HYVA HOSES
00000LP-H - LOW PRESSURE HOSES......................................................................41
00000H-I - HIGH PRESSURE HOSES ........................................................................42
HYVA ADAPTERS
LPADAP01 - LOW PRESSURE ADAPTERS ...............................................................44
HPADAP01 - HIGH PRESSURE ADAPTERS..............................................................47
HYVA BRACKETS
015BRA10 - CHASSIS BRACKETS.............................................................................53
015BRA11 - CHASSIS BRACKETS .............................................................................54
015BRA12 - LIFTING BRACKETS...............................................................................55
015BRA13 - TOP BRACKETS .....................................................................................56
MARKETS....................................................................................................................57
ALPHA WET KIT CATALOGUE - 3

TIPPING SOLUTIONS
ALPHA Series delivers lighter, faster, safer and
more ef cient front end tipping solutions.
Heritage, innovation
and leadership
The ALPHA Series extends and consolidates Hyva’s record
of innovation and leadership in front end cylinders. This is the
fth generation of front end tipping solutions which Hyva has
brought to the market in more than 30 years.
Development has focused on optimising transport efciency,

safety and reliability for the typical duty and conditions
prevailing in each market segment.
Operating Dry Wet

Year HYVA Cylinder
Pressure Weight Weight
1990 162-4 at 170 bar 170 316 394
2005 149-4 at 190 bar 190 257 322
2014 137-4 at 250 bar 250 222 274
Note: Based on the same/equal lifting capacity
Tried and tested

The ALPHA solution was reached only after extensiveresearch,
design and analysis.
Every design was laboratory tested to verify that performance

matched design specication. And, extensive eld trials
were conducted in China, India and the UK.
4
Solution approach
to Technology development
The new ALPHA Series is more than a new hydraulic cylinder.
The total system – cylinder, brackets and wet kit – has
been re-designed and re-engineered for higher efciency and
safer operating at lower cost.
Solution for each

Market segment
Through customer visits and consultation, Hyva has taken
time to understand the different requirements of different
users in different application areas and to use this knowledge
to create product ranges for Construction, Transportation
and Mining segments.
Performance, efciency
and customer value
Lower dead weight higher payload
Faster tipping and lowering shorter cycle time
Longer service intervals increased operating time
Safer and more reliable reduced downtime
Cost effective can reduce operating costs
Lower oil & fuel consumption environmentally friendly

6
HYVA OIL TANK
CRADLE MOUNTED TANK
3D model is available on request
Specifications
Part Number 14016500 14016505 14016520 14016540 14016550

Width W 280 280 280 340 340 mm
WS 368 368 368 400 400 mm
Height H 525 525 700 700 700 mm
Length L 500 620 620 710 820 mm
Outer-Section port distance A 270 270 270 270 270 mm
Gross Volume 66 83 108 154 179 Liters
Working volume 1 47 59 86 122 142 Liters
Working volume 3 - - 69 97 113 Liters
Weight tank 17.7 22.1 27.3 33 36.4 Kg
Suction port 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" BSPIT
Technical notes
• Mount the tank according the mounting instructions • Fill the tank with the recommended hydraulic oil to the centre of the level indicator • Change the oil
once a year • Replace the air breather and return filter element twice a year • Do not use the tank as a support or to stand on • Do not weld on the oil tank •
Paint spec: TNO00_00001
Related documentation
Mounting instructions: OIL-0021 Oil specifications: OIL-0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 140CMT01 / 2014-10-2 / AA
7
HYVA OIL TANK
CRADLE MOUNTED TANK
Support, straps & rubbers
Part No. Oil Tank

CRADLE 286
Weight (Kg)
02
• • • 14016500
• • • 14016505
14016520
14016540
14016550
01
03 01 KIT full 14021010 1.8
tank in cradle
Cradle 286 +
02 Strap 14020470 0.7
Rubbers strap 14020475 0.1
03
04 strap pos. (SP) 350 470
04 Support rubbers 14020450 0.1
•
05
Cradle to be ordered seperate from the kit above:
05 Cradle 286 01507538 36.7
•
06 KIT full 14021013 20.0
•
14021014 20.0
2x 07
•
14021015 22.0
•
Cradle 368 + support
07 Strap 14020460 1.2
•
14020340 1.4
•
14020330 1.4
06
•
2x 08 Rubbers strap 14020465 0.2
08
•
14020335 0.2
•
strap pos. (SP) 350 470 470 560 670
09 Rubbers support 14020485 0.1
•
14020495 0.1
09
•
2x 10 support 14020480 17.0
•
10 14020490 18.0
•
CRADLE 368
Air breather & return filters
Tank Tank
Height = Height = 700
Weight (Kg)
14016500
14016505
14016520
14016540
14016550
11 12 11 Air Breather 08102116 0.4
12 Return filter 150L/m 14780302 14780304 1.0
Return filter high capacity
13 14780332 14780334 1.2
250L/m
Return filter valve mounting
14 14895919 14895921 1.9
plate 150 L/m
13 14
12/13
98
78
11
VALVE 14
78
98,5
11
20
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 2/2 DO-E 140CMT01 / 2014-10-2 / AA
8
HYVA OIL TANK
REAR MOUNTED TANK
98
78
Specifications
Part Number 14016022 14016030 14016160

Width W 280 280 340 mm
Overall Width WS 360 360 400 mm
Height H 525 700 700 mm
Overall Height HS 770 595 770 mm
Length L 1286 1300 1600 mm
A-Min 860 950 1100 mm
Distance between support
A-Max 940 1040 1330 mm
Outer-Suction port distance B 878 885 1150 mm
Gross Volume 174 232 353 Liters
Working volume 1 125 185 280 Liters
Working volume 2 103 169 252 Liters
Working volume 3 - 148 223 Liters
Weight tank 34.6 49 63.1 Kg
Suction port 1.5" 1.5" 1.5" BSPIT
Technical notes
• Mount the tank according the mounting instructions • Fill the tank with the recommended hydraulic oil to the centre of the level indicator • Change the oil once a
year • Replace the air breather and return filter element twice a year • Do not use the tank as a support or to stand on • Do not weld on the oil tank
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 140RMT 01 / 2014-10-2 / AA
9
HYVA OIL TANK
REAR MOUNTED TANK
Part No. Oil Tank
Weight (Kg)
14016022
14016030
14016160
14021020 ● 7.8
01 Full KIT 14021021 ● 8.4
14021022 ● 8.9
02 Vibration Damper 08101078 ● ● ● 0.2
14221600 ● ● 2.5
03 Support Bracket
14221605 ● 2.8
04 Support Rubber 14221602 ● ● ● 0.2
14020460 ● 0.9
05 Strap 14020330 ● 1.5
14020340 ● 1.2
14020465 ● 0.2
06 Rubber strap
14020335 ● ● 0.2
Tank Tank Height
Weight (Kg)
Height =525 =700
14016022
14016030
14016160
07 Air Breather 08102116 0.4
07 08 08 Return filter 150L/m 14780302 14780304

1
09 Return filter 250L/m 14780332 14780334
1.2
Return filter valve mounting
10 14895919 14895921 1.9
plate150 L/m
09 10
08/09
98
78
07
VALVE 10
98,5
07
78
20
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 2/2 DO-E 140RMT 01 / 2014-10-2 / AA
10
HYVA OIL TANK
TOP MOUNTED TANK
Specifications
Part Number 14016515 14016525

W 280 280 mm
Width
WS 396 396 mm
Height H 525 700 mm
Length L 620 620 mm
Outer-Suction port
A 232 407 mm
distance
Gross Volume 83 108 Liters
Working volume 1 59 86 Liters
Working volume 2 48 78 Liters
Working volume 3 69 Liters
Weight tank 29 34,2 Kg
Suction port 1" 1" BSPIT
Technical notes
• Mount the tank according the mounting instructions • Fill the tank with the recommended hydraulic oil to the centre of the level indicator • Change
the oil once a year • Replace the air breather and return filter element twice a year • Do not use the tank as a support or to stand on • Do not weld on
the oil tank • Paint spec: TNO00_00001
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 140TMT 01 / 2014-10-2 / AA
11
HYVA OIL TANK
TOP MOUNTED TANK
Part no. Tank
Weight (Kg)
14016515 &
14016525
01 Full kit 14021030 10,6
02 Support left 14020500 5,0
03 Support right 14020502 5,0
04 Tank rubber 08101050 0,1
05 Washer 15020070 0,1
06 Locking Nut 15026535 0,1
07 Bolt 89250078 0,1
Tank
Height=525 Tank Height=700
Weight (Kg)
14016515
14016525
08 Air Breather 08102116 0,4
09 Return filter 150L/m 14780302 14780304 1,1
08 09
Return filter high capacity
10 14780332 14780334 1,2
250L/m
Return filter valve
11 14895919 14795921 1,2
mounting plate 150 L/m
10 11
09/10
08
98
78
08
11
98,5
78
20
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 2/2 DO-E 140TMT 01 / 2014-10-2 / AA
12
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA STANDARD
SINGLE SUPPORT DOUBLE SUPPORT
Specifications
Part numbers Steel 14017246* 14017254 14017258 14017262 14017266

Part numbers Aluminium 14018246* 14018254 14018258 14018262 14018266
Support configuration Single Double Double Double Double
Width W 330 380 440 495 580 mm
Mounting Width WM-Min - 195 200 220 250 mm
WM-Max - 225 275 330 415 mm
Weight tank (Steel) 30 32 34 36 39 kg
Weight tank (Aluminium) 14 15 16 17 18 kg
Suction port 1.5" (2x) 1.5" 1.5" 1.5" 1.5" BSP
MP: Mounting plate for valve mounting with 3/4" threaded port.
* Tank kit which includes tank, all support components and air breather. One of the two suction ports is closed with a permanent plastic plug.
All other holes are closed with temporary plastic plugs.
Technical notes
Paint spec: TN00_00001
Mounting instructions: OIL-0014 & OIL-0015 Oil specifications: OIL-0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/3 DO-E 140SMT01 / 2015-12-2 / AE
13
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA STANDARD
Supports, straps, rubbers & air breather
Mounting holes: Double support: Part No. Oil Tank
Weight (kg)
14017246
14018246
14017254
14017258
14017262
14017266
14018254
14018258
14018262
14018266
1 hole
3 holes 01 Full kits 14020160 1 hole 22,5
• •
02 14020161 3 holes • 22,5
•
Separate spare parts:
03 14020326 1 hole 11,7
•
Support &
• • • • • • • • •
04 14020320 1 hole 8,7
• • • • • • • •
rubber
Single support: 04 14020321 3 holes 8,7
05 Support 14020339 0,4
06 rubber 14020435 0,4
07 Strap & 14020301 1,2
08 rubber 14020308 1,4
09 Strap 14020426 0,2
10 rubber 14020425 0,2
Air
11 08102116 0,4
•
•
Breather
Mounting 14020377 1,7
• •
e
kit** 14020327 1,1
•
** Mounting kit contains every other fastening components like bolts & pins
When support is connected to the chassis by M16 bolts instead of M14 bolts,
Hyva advises to use the washer kit from option list below.
Return filters
No. Description Part no. Weight

(kg)
12 Return filter 150L/m 14780303 1
13 Return filter 250L/m 14780331 1,1
14 Return filter valve mounting plate 150 L/m 14895920 1,9
When hoses larger than 3/4" or multiple hoses are connected to the return
12 13 filter, HYVA advises to use the strengthening ring from the option list below.
14
For configuration, see Page 3
Options

(kg)
15 Strengthening ring SM tank RF kit 14020509 0,2
- Spacer 295x60x40 for MAN 01040002 0,8
- Spacer 295x60x27 for MAN 01040003 0,5
- Spacer 160x60x8 for Renault 01040004 0,1
- Spacer 230x60x20/16 for Mercedes 01040005 0,3
15 - Spacer Flat 67MM Iveco 01040007 0,7
16
16 Washer kit for M16 bolt 14020125 0,2
WWW.HYVA.COM
14
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA STANDARD
VALVE 14 11
12 / 13 11
98,5
98
78
98
98
78
TOP MOUNTED VALVE
max. valve weight aluminium tank: 3,7 kg
max. valve weight steel tank: 6,4 kg CHASSIS OR CYLINDER (SAE) MOUNTED VALVE
27
25
26
22
24 20
20 21 SIDE MOUNTED VALVE Qty. per KIT
21 No. Description Part No. Option A Option B
Full kit option A 14021045
•
Full kit option B 14021046
•
A B 20
21
Worm Clamp
Return Hose LP20
01238120
14797010
2
1
2
1
22 Hose Pillar LP20 - 1" 14500587 1 2
23 Allen Plug 1/2" 14799175 1 1
24 Hose Pillar LP20 - 1 1/4" 14799322 1 -
21 25 Adapter 1 1/4" - 1" 01222107 - 1
23 26 Adapter T 3x 1" 01318251 - 1
20 27 Bonded Seal 1 1/4" 01206874 - 1
22
SIDE MOUNTED VALVE
34
20
24 28
20 BACK MOUNTED VALVE Qty. per KIT
B
•
A Full kit option B 14021048

•
20 Worm Clamp 01238120 2 2

22 Hose Pillar LP20 - 1" 14500587 1 1
24 Hose Pillar LP20 - 1 1/4" 14799322 1 -
28 Hose LP20 14795020 1 1
29 Mounting Block 14020550 1 1
28 30 Rubber for valve block 14020551 1 1
33 31 Nut M8 15026510 2 2
32 Washer M8 15020051 4 4
22 33 Bolt M8x140 15013700 2 2
20 34 Hose Pillar LP20 - 1 1/4" 14500585 - 1
29
32
31
30 BACK MOUNTED VALVE
(Not possible in combination with single support tanks)
WWW.HYVA.COM
15
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA PLUS
SINGLE SUPPORT DOUBLE SUPPORT
Specifications
Part numbers Steel 14017248* 14017256 14017260 14017264 14017268

Part numbers Aluminium 14018248* 14018256 14018260 14018264 14018268
Support configuration Single Double Double Double Double
Width W 330 380 440 495 580 mm
WM-Min - 195 200 220 250 mm
Mounting Width WM-Max - 225 275 330 415 mm
Weight tank (Steel) 33 35 37 39 42 kg
Weight tank (Aluminium) 15 16 17 18 19 kg
Suction port 1.5" (2x) 1.5" 1.5" 1.5" 1.5" BSP
Extra Return Port (RP) offset R N/A 20 20 10 0 mm
Extra Return Port (RP) Size N/A 1" 1" 1" 1" BSP
MP: Mounting plate for valve mounting with 3/4" threaded port.
* Tank kit which includes tank, all support components and air breather. One of the two suction ports is closed with a permanent plastic plug.
Ports with steel plug and sealing: the port of the left Mounting Plate (MP) & the extra return port.
Ports with temporary plastic plug: all other ports.
Technical notes
Paint spec: TN00_00001
Mounting instructions: OIL-0014 & OIL-0015 Oil specifications: OIL-0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/3 DO-E 140SMT02 / 2015-12-2 / AB
16
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA PLUS
Supports, straps, rubbers & air breather
Mounting holes: Double support: Part No. Oil Tank
Weight (kg)
14017248
14018248
14017256
14017260
14017264
14017268
14018256
14018260
14018264
14018268
1 hole
3 holes 01 Full kits 14020160 1 hole 22,5
• •
02 14020161 3 holes • 22,5
•
Separate spare parts:
03 14020326 1 hole 11,7
•
Support &
• • • • • • • • •
04 14020320 1 hole 8,7
• • • • • • • •
rubber
Single support: 04 14020321 3 holes 8,7
05 Support 14020339 0,4
06 rubber 14020435 0,4
07 Strap & 14020301 1,2
08 rubber 14020308 1,4
09 Strap 14020426 0,2
10 rubber 14020425 0,2
Air
11 08102116 0,4
•
•
Breather
Mounting 14020377 1,7
• •
e
kit** 14020327 1,1
•
** Mounting kit contains every other fastening components like bolts & pins
When support is connected to the chassis by M16 bolts instead of M14 bolts,
Hyva advises to use the washer kit from option list below.
Return filters

(kg)
12 Return filter 150L/m 14780303 1
13 Return filter 250L/m 14780331 1,1
14 Return filter valve mounting plate 150 L/m 14895920 1,9
When hoses larger than 3/4" or multiple hoses are connected to the return
12 13 filter, HYVA advises to use the strengthening ring from the option list below.
14 For configuration, see Page 3
Options

(kg)
15 Strengthening ring SM tank RF kit 14020509 0,2
- Spacer 295x60x40 for MAN 01040002 0,8
- Spacer 295x60x27 for MAN 01040003 0,5
- Spacer 160x60x8 for Renault 01040004 0,1
15 - Spacer Flat 67MM Iveco 01040007 0,7
16
16 Washer kit for M16 bolt 14020125 0,2
WWW.HYVA.COM
17
HYVA OIL TANK
SIDE MOUNTED TANK
ALPHA PLUS
VALVE 14 11 12 / 13 11
98,5
98
78
98
98
78
TOP MOUNTED VALVE (maximum valve weight all tanks: 6,4 kg) CHASSIS OR CYLINDER (SAE) MOUNTED VALVE
27
25
26
24 22
20
20 SIDE MOUNTED VALVE Qty. per KIT
21
•
•
A B 20
21
Worm Clamp
Return Hose LP20
01238120
14797010
2
1
2
1
22 Hose Pillar LP20 - 1" 14500587 1 2
23 Allen Plug 1/2" 14799175 1 1
24 Hose Pillar LP20 - 1 1/4" 14799322 1 -
21 25 Adapter 1 1/4" - 1" 01222107 - 1
23 26 Adapter T 3x 1" 01318251 - 1
20 27 Bonded Seal 1 1/4" 01206874 - 1
22
SIDE MOUNTED VALVE
34
20
24 28
20 BACK MOUNTED VALVE Qty. per KIT
•

•
20 Worm Clamp 01238120 2 2

22 Hose Pillar LP20 - 1" 14500587 1 1
24 Hose Pillar LP20 - 1 1/4" 14799322 1 -
28 Hose LP20 14795020 1 1
29 Mounting Block 14020550 1 1
28 30 Rubber for valve block 14020551 1 1
33 31 Nut M8 15026510 2 2
32 Washer M8 15020051 4 4
22 33 Bolt M8x140 15013700 2 2
20 34 Hose Pillar LP20 - 1 1/4" 14500585 - 1
29
32
31
30 BACK MOUNTED VALVE
(Not possible in combination with single support tanks)
WWW.HYVA.COM
18
HYVA AIR BREATHER
Part No. 08102116
Specifications Spare parts

Part no. 08102116 No. Part no. Description Qty.
Filter action 10 µm 1 08102119 cover 1
Filter capacity 1350 L/min. 2 08102125 filter house 1
Temperature range min -40 °C 3 08102117 filter element 1
max +100 °C 4 08102126 seal 1
max. filling quantity 40 L/min. 5 08102127 bolt 6
6 08102128 sleeve 1
Pressure difference vs. flow
0.07
0.06
0.05
0.04
Series1
0.03
0.02
0.01
0
0 1000 2000 3000 4000
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/1 DO-E 08102116 / 2014-10-2 / AA
19
HYVA RETURN FILTER
Return filter + top housing Return filter + valve housing
Types & components Spare parts per type General spare parts
Tube only Filter Only

TL IFL SQ* HQ** Full kit Weight (kg) No. Part no Description Qty
number (1) number (2)
• 14780306 1.2 - 14896991A 03 15012790 Countersunk bolt 4
No tube
• 14780305 1.4 - 14896990 04 15004010 Hex. bolt 2
• 14780301 1.3 14896991A 05 15022020 Washer 2
250 460 14780319
Return filter + • 14780331 1.5 14896990
top housing • 14780303 1.3 14896991A
350 560 14780320
• 14780333 1.5 14896990
• 14780304 1.3 14896991A
400 610 14780307
• 14780334 1.5 14896990
No tube • 14895918 1.7 - 14896991A
Return filter + 150 460 • 14895919 1.8 14895915 14896991A
valve mounting 250 560 • 14895920 1.9 14895916 14896991A
350 660 • 14895921 2,0 14895917 14896991A
SQ* = Standard Quality

HQ** = High Quality
Specification
SQ* HQ**
Nominal flow (clean element) 150 250 L/min
Peak flow 300 375 L/min
By-pass pressure 1.75 2.5 bar -/+10%
Collapse pressure element 10 8 bar
Filter element 25 25 µ
Temperature range min -40 -40 °C
max +100 +100 °C
Dirt holding capacity 25 37,4 gr @ 2 bar
Filter area 1730 2500 mm2
Technical notes
Replace element twice a year
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/1 DO-E RFILTE01/ 2014-10-2 / AA
20
HYVA GEAR PUMP
ALPHA Gear pump 4H ISO
4 port 2 side ports 2 rear ports
Specifications
14562005 14562010 14562015 14571224 14562091 14562030 14562093 14562095 14562041

Displacement per revolution 34,56 51,88 61,26 81,68 81,68 91,56 100,52 100,52 112,85 cm3
Max. Pressure for tipping applications
275 275 250 250 250 250 250 250 250 bar
( intermittent )
Max. continuous pressure 255 255 230 230 230 230 230 230 230 bar
Max.flow
80 119 141 188 188 190 213 213 213 l/m
(@ max. rpm)
Mass 12,5 13,5 14 16 16 19 19 19 20,5 kg
Port configuration 4 port 4 port 4 port 2 side 2 rear 4 port 2 rear 2 side 2 rear
Length pump L 189 200 206 221,5 221,5 236 239 239 246 mm
Width pump W 128 128 128 138 138 140,5 140 140 140,5 mm
Height pump H 149,4 149,4 149,4 149,4 149,4 166,5 149,4 149,4 166,5 mm
Position side port A 130,5 132,5 138,5 151,5 155 161 165 mm
Position rear port B 30 30 30 33 33 33 33 mm
Maximum peak pressure 280 280 260 255 255 255 255 255 255 bar
Max. speed at intermittent press. 2500 2500 2500 2500 2500 2250 2250 2250 2000 rpm
Min. speed at intermittent press. 300 300 300 300 300 400 400 400 400 rpm
Oil temperature range min -40 -40 -40 -40 -40 -40 -40 -40 -40 °C
max 80 80 80 80 80 80 80 80 80 °C
Inlet pressure range (suction side) min 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,7 bar
max 3 3 3 3 3 3 3 3 3 bar
Recommended oil viscosity range min 12 12 12 12 12 12 12 12 12 mm2/s
max 100 100 100 100 100 100 100 100 100 mm2/s
Maximum starting viscosity 750 750 750 750 750 750 750 750 750 mm2/s
Min. Filtration 25 25 25 25 25 25 25 25 25 µm
Connection:
inlet - straight internal thread 3/4 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 BSP
outlet - straight internal thread 3/4 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 BSP
Minimum suction hose bore diameter 1 1/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 inch
Shaft DIN 5462 8*32*36 8*32*36 8*32*36 8*32*36 8*32*36 8*32*36 8*32*36 8*32*36 8*32*36 mm
Centre of gravity distance (CofG) 99,3 105,2 106,5 117,8 117,8 126 128 131 132,4 mm
Noise level at 1000 min-1 and 100 bar 62,5 62,6 65,1 66,6 66,6 64,8 66,6 66,6 66,6 dB
noise level at 1500 min-1 and 100 bar 67,6 67,5 69,4 71 71 68,3 69,5 69,5 69,5 dB
Technical notes
The mentioned data on page 1 is for mineral based oil, for other fluids please contact our engineering dept. The filtration as mentioned is for tippers only. For different application
we advise filtration according ISO 4406 class 17/14. To avoid the cavitation, the suction hose must be kept as short and straight as possible, and the minimum oil level in the oil
tank must be above the inlet of the pump. • Paint spec: TNO00_00001
Related documents
Mounting Instructions: PUM-0020 Oil Specifications: OIL-0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/4 DO-E 145GPBRITE01 / 2014-10-2 /AA
21
HYVA GEAR PUMP
Spare parts
Description 35cc 52cc 61cc 82cc 92cc 100cc 113cc
Seal kit (parts: 2, 3, 4, 5, 6, 7 & 8) 02460000 02460000 02460000 02460000 02460005 02460007 02460005
1 Thrust plate 02059415 02059415 02259400 02259400 02259405 - 02259405
2 OR-seal 02391720 02391720 02391720 02391720 02391721 02391720 02391721
3 O-ring 02395800 02395800 02395800 02395800 - 02395800 -
4 seal 02396570 02396570 02396570 02396570 02396571 02396570 02396571
5 shaft seal 02404819 02404819 02404819 02404819 02404826 02404819 02404826
6 shaft seal 02404825 02404825 02404825 02404825 02404841 02404825 02404841
7 shaft seal 02391675 02391675 02391675 02391675 02404839 02391675 02404839
8 back-up ring 02396527 02396527 02396527 02396527 02396528 02396527 02396528
9 Bonded Seal 01206850 01313848 01313848 01313848 01206874 01206874 01206874
10 Steel plug 01702841 01702853 01702853 01702853 01702856 01702856 01702856
11 leak indicator kit 02470180 02470180 02470180 02470180 02470180 02470180 02470180
Pressure definition Hydraulic pump symbol
P1 = Peak Pressure
P2 = Intermittent Pressure
P3 = Continuous Pressure
Torque - Pressure characteristics

500
450
400
350 113L
Torque(Nm)
300 100L
250 92L
200 82L
150 61L
100 52L
50 35L
0
0 50 100 150 200 250 300
Pressure(bar)
Repair instructions: PUM-0006 (35cc to 82 cc) / 0009 (92 cc to 113 cc)

Subject to change without notice, no rights reserved Page 2/4 DO-E 145GPBRITE01 / 2014-10-2 /AA
22
HYVA GEAR PUMP
35 cc (145620005)
Power - Pressure FLOW - RPM

40 3000
35
2500
30
25 2500rpm 2000
Power (kw)
20 2000rpm 1500
RPM
15 1500 rpm
1000
10 1000 rpm
5 500 rpm 500
0 0
0 50 100 150 200 250 300 0 20 40 60 80 100
Pressure(bar)
Flow (L/Min)
52 cc (14562010)

60 3000
50 2500
40 2000
2500rpm
Power (kw)
1500
RPM
30 2000rpm
1500 rpm 1000
20
1000 rpm
500
10
500 rpm
0
0
0 20 40 60 80 100 120 140
0 50 100 150 200 250 300
Pressure(bar) Flow (L/Min)
61 cc (14562015)

70 3000
60 2500
50
2500rpm 2000
Power (kw)
40
2000rpm 1500
RPM
30
1500 rpm
20 1000
1000 rpm
10 500
500 rpm
0
0
0 50 100 150 200 250 300
0 20 40 60 80 100 120 140 160
Pressure(bar)
Flow (L/Min)
82 cc (14571224 & 14562091)

100 3000
90
80 2500
70
2000
(L/Min)
2500rpm
Power (kw)
60
50 2000rpm 1500
FlowRPM
40 1500 rpm
30 1000
1000 rpm
20
10 500 rpm 500
0 0
0 50 100 150 200 250 300 0 50 100 150 200 250
Pressure(bar)
RPM
Flow (L/Min)
WWW.HYVA.COM
Subject to change without notice, no rights reserved 23 3/4
Page DO-E 145GPBRITE01 / 2014-10-2 /AA
HYVA GEAR PUMP
92 cc (14562030)

100 2500
90
80 2000
70
2250rpm
Power (kw)
60 1500
50 2000rpm
RPM
40 1000
1500 rpm
30
1000 rpm
20 500
500 rpm
10
0 0
0 50 100 150 200 250 300 0 50 100 150 200
Pressure(bar)
Flow (L/Min)
100 cc (14562093 & 14562095)

120 2500
100
2000
80 2250rpm
Power (kw)
1500
60 2000rpm
RPM
1500 rpm 1000

40
1000 rpm
20 500
500 rpm
0 0
0 50 100 150 200 250 300 0 50 100 150 200 250
Pressure(bar)
Flow (L/Min)
113 cc (14562041)

120 2500
100
2000
80
Power (kw)
2000rpm 1500
60
RPM
1500 rpm
40 1000
1000 rpm
20 500 rpm 500
0
0
0 50 100 150 200 250 300
0 50 100 150 200 250
Pressure(bar)
Flow (L/Min)
WWW.HYVA.COM
Subject to change without notice, no rights reserved 24 4/4
Page DO-E 145GPBRITE01 / 2014-10-2 /AA
HYVA TIPPING VALVE
HT-1150-TNK / SAE
1 Pump connection (P)

2 Tank connection (T)
3 Cylinder connection SAE(C)
4 Pneumatic connection (Tip)
5 Pneumatic connection (Lower)
6 Pressure catridge
7 Pressure gauge point
8 Adjustment screw
(To adjust the lowering speed)
For mounting on SAFETY

● Hyva tank mounting plate HT valve fitted on cylinder (SAE)
● Directly on Hyva cylinder with SAE inlet 3D model is available on request Valve offers hose burst safety function
Types
Hydraulic Pressure (BAR) Part Number Description Optional adapter kits Kit number
connections Max.
135 14767213 TIP VALVE HT-TNK/SAE-1150-135-P3/4" 3/4" Straight TNK AK5212TS
150 14767215 TIP VALVE HT-TNK/SAE-1150-150-P3/4" 3/4" 90 degree TNK AK5212TE
P,T & C = 3/4" 170 14767217 TIP VALVE HT-TNK/SAE-1150-170-P3/4" 3/4" Straight SAE AK5212SS
C = SAE 190 14767219 TIP VALVE HT-TNK/SAE-1150-190-P3/4" 3/4" 90 degree SAE AK5212SE
220 14767222 TIP VALVE HT-TNK/SAE-1150-220-P3/4" 1" Straight TNK AK5216TS
250 14767225 TIP VALVE HT-TNK/SAE-1150-250-P3/4" 1" 90 degree TNK AK5216TE
135 14767263 TIP VALVE HT-TNK/SAE-1150-135-P1" 1" Straight SAE AK5216SS
150 14767265 TIP VALVE HT-TNK/SAE-1150-150-P1" 1" 90 degree SAE AK5216SE
T,C=3/4"&
170 14767267 TIP VALVE HT-TNK/SAE-1150-170-P1"
P=1"
C = SAE Mounting kits Kit number
250 14767275 TIP VALVE HT-TNK/SAE-1150-250-P1" Cylinder (SAE)* 14735162
Tank (TNK)* 14735160
* = NOT included with valve
Specifications ∆p - Q characteristic
Type Spool valve with pressureless bypass in neutral. Oil flow in
lowering position is proportional with pneumatic pilot
pressure.
Max. peak pressure 300 bar

Pressure over Valve (Bar)
Pneumatic pilot pressure 6-12 bar

Max. pump flow 150 L/min
Max. pressure on T-connection 10 bar
Min. filtration (ISO 18/13) 25 µm
Viscosity range min 12 mm2/s (cst)
max 100 mm2/s (cst)
Temparature range min -40 °C
max 80 °C
Mass 3,7 kg
Technical notes
• Mount the valve according the mounting instructions • Use the correct washers and adapters in the ports to prevent housing deformation. Do not use
adapters with tapered threads • To further prevent deformation of the valve housing, the mounting plate surface or block must be completely flat and plane. •
Do not weld to the valve. • Ideal air pressure for valve is 8 bar. • Make sure inlet air is dry. • Paint Spec: TN00_00001
Mounting instructions: VAL-0022 OIL Specifications: OIL:0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E HT-1150-TNK-SAE / 2014-10-2 / AA
25
HYVA TIPPING VALVE
HT-1150-TNK / SAE
Spare Parts
No. Part no. Description Qty No. Part no. Description Qty
1 01226200 O-ring 2 7 14845018 Quadring 1
2 14845005 Closing plate for HT-valve 1 8 14845019 Circlip 2
3 14845007 Piston air cylinder 1 9 14845020 Quadring 1
4 14772… Cartridge pressure relief 1 10 14845015 Sealing nut M8 for HT-valve 1
14772135 135 bar 11 14810517 Air coupling 1/8'' 2
14772150 150 bar 12 14845039 Plug 1
14772170 170 bar 13 01206813 Bonded seal 1
14772190 190 bar 14 14841215 O-ring 10,82 x 1,78 1
14772220 220 bar 15 14739980 Non return valve 3/4" 1
14772250 250 bar 14739975A Non return valve 1'' 1
14772280 280 bar 16 15029046 Circlip 1
5 14845024 Plug 1 17 15022015 Washer spring 4
6 14845013 O-ring 1 18 15013639 Bolt HSHC 4
Hydraulic symbol of the HT valve
REPAIR INSTRUCTIONS : VAL-0017

Subject to change without notice, no rights reserved Page 2/2 DO-E HT-1150-TNK-SAE / 2014-10-2 / AA
26
HYVA TIPPING VALVE
HT-1220-SAE

2 Tank connection (T)
3 Cylinder connection SAE(C)
6 pressure catridge
8 Adjustment screw
SAFETY
For mounting on HT valve fitted on cylinder (SAE)
● Directly on Hyva cylinder with SAE inlet 3D model is available on request Port offers hose burst safety function
Types
connections Max.
150 14767454 TIP VALVE HT-SAE-1220-150-P3/4" 3/4" Straight SAE AK5112SS
P = 3/4" & 170 14767456 TIP VALVE HT-SAE-1220-170-P3/4" 3/4" 90 degree SAE AK5112SE
T=1" 190 14767458 TIP VALVE HT-SAE-1220-190-P3/4" 1" Straight SAE AK5116SS
C = SAE 220 14767460 TIP VALVE HT-SAE-1220-220-P3/4" 1" 90 degree SAE AK5116SE
250 14767462 TIP VALVE HT-SAE-1220-250-P3/4"
150 14767455 TIP VALVE HT-SAE-1220-150-P1"
Mounting kits Kit number
170 14767457 TIP VALVE HT-SAE-1220-170-P1"
T & P=1"
190 14767459 TIP VALVE HT-SAE-1220-190-P1" Cylinder (SAE)* 14735175
C = SAE
220 14767461 TIP VALVE HT-SAE-1220-220-P1" * = included with valve
250 14767463 TIP VALVE HT-SAE-1220-250-P1"
Type Spool valve with pressureless bypass in neutral.
Oil flow in lowering position is proportional with
pneumatic pilot pressure

Pressure over Valve (Bar)

max 100 mm2/s (cst)
max 80 °C
Mass 5,5 kg
Technical notes
• Mount the valve according the mounting instructions • Use the correct washers and adapters in the ports to prevent housing deformation. Do not
use adapters with tapered threads • To further prevent deformation of the valve housing, the mounting plate surface or block must be completely
flat and plane. • Do not weld to the valve. • Ideal air pressure for valve is 8 bar. • Make sure inlet air is dry.
• Paint spec: TNO00_00001
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E HT-1220-SAE / 2014-10-2 / AA
27
HYVA TIPPING VALVE
HT-1220-SAE
Spare Parts
1 01226200 o-ring 2 7 14845018 quadring 1
2 14845005 closing plate 1 8 14845019 circlip 2
3 14845007 piston air cylinder 1 9 14845020 quadring 1
4 14772… cartrige pressure relief 1 10 14845015 sealing nut M8 for HT-valve 1
14772150 150 bar 11 14810517 air coupling 1/8'' 2
14772170 170 bar 12 14845039 blind plug 1
14772190 190 bar 13 01206813 bonded seal 1
14772220 220 bar 14 14841215 o-ring 10,82 x 1,78 1
14772250 250 bar 15 14739980 non return valve 3/4" 1
5 14845024 blind plug 1 15 14739975A non return valve 1'' 1
6 14845013 O-ring 1 16 15029046 circlip 1
17 15022015 washer spring 4
18 15013639 bolt HSHC 4
19 01313848 bonded seal 1

Subject to change without notice, no rights reserved Page 2/2 DO-E HT-1220-SAE / 2014-10-2 / AA
28
HYVA TIPPING VALVE
HT-1220-TNK

2A Return tank connection (T)
2B Alternative return tank connection (T)
3 Cylinder connection (C)
7 High pressure catridge
8 Adjustment screw
For mounting on
● Hyva tank mounting plate 3D model is available on request
Types
connections Max.
110 14767111 TIP VALVE HT-TNK-1220-110-P1" 1" Straight TNK AK5016TS
135 14767113 TIP VALVE HT-TNK-1220-135-P1" 1" 90 degree TNK AK5016TE
150 14767115 TIP VALVE HT-TNK-1220-150-P1" 1" Straight CHASSIS AK5016CS
170 14767117 TIP VALVE HT-TNK-1220-170-P1" 1" 90 degree CHASSIS AK5016CE
T, C & P=1" 190 14767119 TIP VALVE HT-TNK-1220-190-P1"
220 14767122 TIP VALVE HT-TNK-1220-220-P1"
Mounting kits Kit number
250 14767125 TIP VALVE HT-TNK-1220-250-P1"
280 14767128 TIP VALVE HT-TNK-1220-280-P1" Tank (TNK) * 14735168
350 14767135 TIP VALVE HT-TNK-1220-350-P1" Chassis 14735208
* = included with valve
pneumatic pilot pressure.

Pressure over valve (Bar)

Filtration (ISO 18/13) 25 µm
max 100 mm2/s (cst)
max 80 °C
Mass 6,1 kg
Technical notes
adapters with tapered threads • To further prevent deformation of the valve housing, the mounting plate surface or block must be completely flat and plane.
• Do not weld to the valve. • Ideal air pressure for valve is 8 bar. • Make sure inlet air is dry.
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E HT-1220-TNK / 2014-10-2 / AA
29
HYVA TIPPING VALVE
HT-1220-TNK
Spare Parts
1 14845005 closing plate 1 4 14739975A non return valve 1
2 14845007 piston air cylinder 1 5 14845013 O-ring 1
3 14772… cartridge pressure relief 1 6 14845020 Quadring 1
14772110 110 bar 1 7 14845018 Quadring 1
14772135 135 bar 8 01313848 bonded seal 2
14772150 150 bar 9 14810517 straight coupling 2
14772170 170 bar 10 14845024 blind plug 1
14772190 190 bar 11 14845039 blind plug 1
14772220 220 bar 12 14845040 blind plug 1
14772250 250 bar 13 01226200 O-ring 2
14772280 280 bar
14772350 350 bar
HT valve: Hydraulic symbol

30
HYVA TIPPING VALVE
HT-2220-TNK

2A Return tank connection (T)
2B Alternative return tank connection (T)
3 Cylinder connection (C)
7A High pressure catridge (Max 2)
7B Low pressure catridge (Max 1)
8 Pressure Selector
9 Adjustment screw
For mounting on
● Hyva tank mounting plate 3D model is available on request
Types
connections Max. 1* Max. 2*
220 14767152 TIP VALVE HT-TNK-2220-150-220-P1" 1" Straight TNK mounting AK5016TS
250 14767155 TIP VALVE HT-TNK-2220-150-250-P1" 1" 90 degree TNK mounting AK5016TE
150
280 14767158 TIP VALVE HT-TNK-2220-150-280-P1" 1" Straight CHASSIS mounting AK5016CS
350 14767165 TIP VALVE HT-TNK-2220-150-350-P1" 1" 90 degree CHASSIS mount. AK5016CE
220 14767172 TIP VALVE HT-TNK-2220-170-220-P1"
T, C & P=1" 250 14767175 TIP VALVE HT-TNK-2220-170-250-P1"
170 Mounting kits Kit number
280 14767178 TIP VALVE HT-TNK-2220-170-280-P1"
350 14767185 TIP VALVE HT-TNK-2220-170-350-P1" Tank (TNK) ** 14735168
220 14767192 TIP VALVE HT-TNK-2220-190-220-P1" Chassis 14735208
250 14767195 TIP VALVE HT-TNK-2220-190-250-P1" ** = included with valve
190
280 14767198 TIP VALVE HT-TNK-2220-190-280-P1"
350 14767200 TIP VALVE HT-TNK-2220-190-350-P1"
* = The user can choose the maximum pressure limit by using the Pressure Selector (8)
pneumatic pilot pressure

Pressure over valve (Bar)

max 100 mm2/s (cst)
max 80 °C
Mass 6,4 kg
Technical notes
adapters with tapered threads • To further prevent deformation of the valve housing, the mounting plate surface or block must be completely flat and
plane. • Do not weld to the valve. • Ideal air pressure for valve is 8 bar. • Make sure inlet air is dry.
WWW.HYVA.COM
31
HYVA TIPPING VALVE
HT-2220-TNK
Spare Parts
1 01313848 Bonded Seal 2 6 14845040 Bling Plug 1
2 14739975A Non return valve 1 7 14810517 Straight coupling 2
3 14772… Pressure cartridge 2 8 15013638 Bolt 4
3 14772150 150 bar 9 15022015 Washer 4
3 14772170 170 bar 10 01226200 O-ring 2
3 14772190 190 bar 11 14845007 Piston air cylinder 1
3 14772220 220 bar 12 14845020 Quadring 1
3 14772250 250 bar 13 14845018 Quadring 1
3 14772280 280 bar 14 14845013 O-ring 1
3 14772350 350 bar 15 14845019 Retaining ring 2
4 14845024 Blind Plug 1 16 14845031 Retaining ring 3
5 14845050 PR. Adj. KIT 1
Max 1 = the pressure cardridge with the lowest BAR value
Max 2 = the pressure cardridge with the highest BAR value

32
HYVA KNOCK-OFF
STANDARD Part No. 147 00 506
Specification Pneumatic symbol

Part No. 14700506
Mounting Cradle
Max working pressure 10 bar
Connections (tube) 6x4 mm
Temperature range Max +80 °C
Min -40 °C
Weight 0,6 kg
Spare Parts
Part No. Description Qty Weight (KG)

14700508 Knock-off (no bracket) 1 0,25
14700507 Seal kit 1
14810517 Air coupling straight - 6 mm 1 0,01
14810566 Air coupling 90 degrees - 6 mm 1 0,01
Technical notes
Make sure inlet air is dry and clean
Mounting instructions: KNO-0020 Repair instructions: KNO-0005
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/1 DO-E 14700506 / 2014-10-2 / AD
33
HYVA KNOCK-OFF
HEAVY DUTY Part No. 147 00 578

Part No. 14700578
Mounting Cylinder
Max working pressure 10 bar
Connections (tube) 6x4 mm
Temperature range Max +80 °C
Min -40 °C
Weight 0,95 kg
Spare Parts
Part No. Description Qty Weight (KG)
14700575 Knock-off (no bracket) 1 0,73
75375015 Stop Plate - KnockOff 1 0,05
14700577 Seal Kit 1
14810517 Air coupling straight - 6 mm 1 0,01
14810566 Air coupling 90 degrees - 6 mm 1 0,01
Technical notes
Make sure inlet air is dry and clean
Mounting instructions: KNO-0021 Repair instructions: KNO-0007
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/1 DO-E 14700578 / 2014-10-2 / AB
34
HYVA AIR CONTROLS
ALU HOUSING
1 Air inlet
2 Air exhaust
3 Lowering connection(to tipping valve)
4 Tipping connection(to tipping valve)
5 Working port P.T.O.
1-section
1 section 2-section
2 section

Max. air pressure 12 Bar Connections 6 mm hose
Min. air pressure 5 Bar Mounting holes M6
Max. temperature 80 °C Voltage lamp 24 VDC
Min. temperature -40 °C Weight 0,4 KG
Lever characteristic PTO control 5-PTO 4-TIP

Section Part no.
TS/LF TF/LF PNL PAL
• 14750667H 3-low
1-section
• 14750665H
• • 14750646H
• • 14750652H 2-EX 1-IN
2-section
• • 14750644H
• • 14750650H
TF Lever is fixed in tipping position

TS Lever has spring return in tipping position
LF Lever is fixed in lowering position
PNL P.T.O control has no automatic disengage
P.T.O has a lamp
PAL P.T.O control has an automatic disengage
P.T.O has a lamp
NOTE:
The air control TF/LF is not allowed to be used on a tipper in the EU according Machinery Directive 2006/42/EC, chapter 3.3.1
Technical notes
• When used with a compatible tipping valve with proportional lowering, the speed of descent of the body can be regulated by the
proportional movement of the air control lever.• The air control includes an electrical indicator to show P.T.O. engagement.
• The functions of Hyva air controls are clearly indicated on the type plate. • Make sure inlet air is dry.
Mounting instructions: AIR- 0002
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 147AIR-51-52 H / 2014-10-2 / AA
35
HYVA AIR CONTROLS
ALU HOUSING
Options
POS Part no. Description Qty.

01 147506xxH Air control 1
02 14750119K Air tube kit 6mm 1
25 meter single tube
9 meter (3 in 1)
9 meter (2 in 1)
03 09225005 T-piece 6mm 1
04 14875500 Air tube tie 8
05 1487500715 Air tube 15m - 4x6 mm 1
05 1487500720 Air tube 20m - 4x6 mm 1
05 1487500725 Air tube 25m - 4x6 mm 1
05 1487500735 Air tube 35m - 4x6 mm 1
Mounting Support
Weigth
POS Part no. Description
(kg)
06 09232002 Support tip control 0,18
07 09205002 Support tip control 0.44
06 07
REPAIR INSTRUCTIONS: AIR-0005

Subject to change without notice, no rights reserved Page 2/2 DO-E 147AIR-51-52 H / 2014-10-2 / AA
36
HYVA AIR CONTROLS
PLASTIC HOUSING
1 Air inlet
2 Air exhaust
3 Lowering connection(to tipping valve)
4 Tipping connection(to tipping valve)
5 Working port P.T.O.
1-section 2-section
1 2 5
3

Max. air pressure 12 Bar Connections 6 mm hose
Min. air pressure 5 Bar Mounting holes M6
Max. temperature 80 °C Voltage lamp 24 VDC
Min. temperature -40 °C Weight 0,37 KG
Section Lever characteristic PTO control Safety Part no.

TS/LF TF/LF PNL PAL switch
• 02119065
1-section
• 02119064
• • 02119061
• • 02119063
2-section • • 02119060
• • 02119062
• • • 02119035
TF Lever is fixed in tipping position

TS Lever has spring return in tipping position
LF Lever is fixed in lowering position
PNL P.T.O control has no automatic disengage
P.T.O has a lamp
PAL P.T.O control has an automatic disengage
P.T.O has a lamp
NOTE:
The air control TF/LF is not allowed to be used on a tipper in the EU according Machinery Directive 2006/42/EC, chapter 3.3.1
Technical notes
• When used with a compatible tipping valve with proportional lowering, the speed of descent of the body can be regulated by the
proportional movement of the air control lever.• The air control includes an electrical indicator to show P.T.O. engagement.
• The functions of Hyva air controls are clearly indicated on the type plate. • Make sure inlet air is dry.
Mounting instructions: AIR- 0002
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 021AIR-51-52 / 2014-10-2 / AA
37
HYVA AIR CONTROLS
PLASTIC HOUSING
Options
POS Part no. Description Qty.

01 021190xx Air control 1
25 meter single tube
9 meter (3 in 1)
9 meter (2 in 1)
03 09225005 T-piece 6mm 1
04 14875500 Air tube tie-wrap 8
05 1487500715 Air tube 15m - 4x6 mm 1
05 1487500720 Air tube 20m - 4x6 mm 1
05 1487500725 Air tube 25m - 4x6 mm 1
05 1487500735 Air tube 35m - 4x6 mm 1
Mounting Support
POS Part no. Description Weigth (kg)
06 02119000 Bracket kit for air control 0,15

06 07
08
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 2/2 DO-E 021AIR-51-52 / 2014-10-2 / AA
38
TECHNOLOGY
ALPHA Series presents front end tipping solutions
capable of operating at pressures up to 250 bar.
ALL NEW front end tipping
solution in which hydraulic cylinders are
smaller, lighter, stronger, operate at higher
pressure and consume less oil. Brackets are
stronger, lighter and can be maintenancefree.
Wet kits have improved knock-off

and control options, cylinder mounted
tipping valves, new tank and lter options,
and, pumps operating at up to 250 bar.
New cylinder diameters (118, 137, 157

and 179mm) in combination with the
operating pressure at 250 bar have not
only increased the range but also the
optimisation of tipping solutions to specic
applications.
The range includes Standard and Heavy

Duty (HD) cylinders. HD cylinders have larger
overlaps and stop and lift faces which have
been redesigned to permit exceptionally
high tipping and lowering speeds.
These improvements deliver faster tipping,

shorter cycle times and reduced system
size and weight which can translate into
more efcient working routines, increased
payloads and reduced operating costs.
Smaller space installations, quick connections

of valves, cylinders and hoses, maintenance
free seals and longer service intervals all
contribute to lower levels of downtime.
Performance improvement has been

achieved through re-design and re-
engineering of the complete hydraulic system,
down to the component and sub-assembly
level, together with improvements to installation
and service procedures.
New cylinder diameters

110 118 129 137 149
157 169 179 191 214

39
LIGHTER Reduced components
weight through a combination of new
materials and improved design has produced
a lighter hydraulic system which can translate
into higher payloads and can reduce operating
costs.
FASTER Higher operating

pressures, up to 250 bar, enable faster tipping
and lowering and can deliver shorter cycle
times.
SAFER Enhanced safety with

re-designed cylinder overlaps and guide
systems and new cylinder mounted HT
tipping valves.
MORE EFFICIENT
Reduced weight, increased operating
speed, more reliable components, longer
service intervals and lower fuel and oil
consumption all contribute to improved
efciency and environmental performance.

HYVA HOSE
LOW PRESSURE
1 Hose
2 Hose clip
3 Bracket
Specification
Working pressure
Type Size ID Min. Bending radius (mm)
(bar)
LP-20 1 1/4" (31,75mm) 14 205
LP-28 1 3/4" (44,45mm) 7 280
LP-32 2" (50,8mm) 7 305
Bracket Bracket
Length Weight Length Weight
Hose Part no. (1) Hose clip (2) hose fixing Hose Part no. (1) Hose clip (2) hose fixing
(mm) (kg) (mm) (kg)
(3) (3)
14796594
14796600
14796612
09223006
09223001
14796594
14796600
14796612
09223006
09223001
500 14795030 • • 0.9 1500 14795852 • • 3.2
1000 14795032 • • 1.5 2000 14795853 • • 4.1
1500 14795034 • • 2.2 2225 14795860 • • 4.5
LP-20 LP-32
2000 14795036 • • 2.9 2500 14795854 • • 5.0
2250 14795038 • • 3.2 3000 14795855 • • 5.9
2500 14795040 • • 3.5 3500 14795856 • • 6.8
1000 14795116 • • 1.8
1380 14795137 • • 2.4
1500 14795118 • • 2.6
LP-28 2000 14795120 • • 3.3
2250 14795130 • • 3.7
2500 14795131 • • 4.1
3000 14795132 • • 4.8
Mounting instructions: HOS- 0020 Oil specifications: OIL-0011
WWW.HYVA.COM
Subject to change without notice, no rights reserved page1/1 DK-E 00000LP-H / 2014-10-2 - AB
41
HYVA HOSE
HIGH PRESSURE
Specification
Max pressure Min. Bending radius

Type Size ID Thread
(bar) (mm)
HP-08 1/2" (12,7mm) BSP 310 145

HP-12 3/4" (19,0mm) BSP 280 195
Hose Pressure Length Connections Part no. Weight Hose Pressure Length Connections Part no. Weight
(mm) (kg) (mm) (kg)
& Elbow
& Elbow
Straigth
Straigth
Straigth
Straigth
• 14789483 0.6 • 14790026 1.1
700 1000
• 14789589 0.6 • 14790129 1.2
• 14789486 0.8 • 14790038 1.5
1000 1500
• 14789570 0.9 • 14790130 1.6
• 14789504 1.0 • 14790040 1.9
1500 2000
• 14789582 1.0 • 14790142 2.0
• 14789510 1.2 • 14790051 2.3
2000 2500
HP-08 310 bar • 14789583 1.3 • 14790154 2.4
• 14789530 1.6 • 14790063 2.7
2500 3000
• 14789535 1.6 • 14790166 2.9
HP-12 280 bar
• 14789549 1.7 • 14790087 3.2
3000 3500
• 14789550 1.8 • 14790170 3.4
• 14789553 2.2 • 14790075 3.6
3500 4000
• 14789591 2.0 • 14790178 3.8
• 14789555 2.4 • 14790078 4.1
4000 4500
• 14789592 2.5 • 14790079 4.3
• 14790010 0.5 • 14790081 4.5
500 5000
• 14790011 0.6 • 14790191 4.8
HP-12 280 bar
• 14790014 0.9 • 14790086 5.4
700 6000
• 14790017 1.0 • 14790195 5.8
See next page for more types
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/2 DO-E 00000H-I / 2014-10-2 / AC
42
HYVA HOSE
HIGH PRESSURE
Specification
Max pressure
Type Size ID Thread Min. Bending radius (mm)
(bar)
HP-16 1" (25,4mm) Metric (M36x2) 88 230
HP-16 1" (25,4mm) BSP 250 240
Hose Pressure Length Connections Part no. Hose Pressure Length Connections Part no.
(mm) (mm)
& Elbow
& Elbow
Straigth
Straigth
Straigth
Straigth
• 14790452 • 14790484
700 700
• 14794513 • 14790486
• 14790450 • 14790485
1000 1000
• 14794515 • 14794432
• 14790455 • 14790490
1500 1500
• 14790335 • 14794434
• 14790460 • 14790495
2000 2000
• 14794525 • 14794436
HP-16 88 bar HP-16 250 bar
• 14790465 • 14790500
2500 2500
• 14794530 • 14794437
• 14790470 • 14790505
3000 3000
• 14794535 • 14794438
• 14790475 • 14790510
3500 3500
• 14794540 • 14794439
• 14790480 • 14790515
4000 4000
• 14794545 • 14794440
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 2/2 DO-E 00000H-I / 2014-10-2 / AC
43
HYVA ADAPTERS
Low Pressure
Straight hose pillar BSPOT
L1 L2 L3 L4 D1 D2 D3 D4 Sw1 Weight
Part no. Description
(mm) (mm) (mm) (mm) (inch) (mm) (mm) (mm) (mm) (KG)
14500587 Hose pillar LP20-00-1"-NYLON 70 39 14 29 1 22 24 33 46 0.04
14500589 Hose pillar LP20-00-1" 82 50 17 37 1 23 26 32 41 0.27
14500585 Hose pillar LP20-00-1 1/4"-NYLON 67 39 11 29 1 1/4 24 24 33 50 0.05
14799310 Hose pillar LP28-00-1"-NYLON 70 39 13 29 1 23 38 44 50 0.05
14799000 Hose pillar LP28-00-1" 70 40 11 30 1 23 38 44 50 0.13
14799005 Hose pillar LP28-00-1 1/4" 70 40 11 30 1 1/4 32 38 44 55 0.16
14799015 Hose pillar LP28-00-1 1/2" 70 40 11 30 1 1/2 36 38 44 60 0.16
14535328 Hose pillar LP32-00-1 1/4" 79 45 19 27 1 1/4 32 44 50 55 0.45
14500492 Hose pillar LP32-00-1 1/2" 84 52 11 35 1 1/2 38 43 50 60 0.51
Straight adapter BSPOT-BSPOT
L1 L2 D1 D2 Sw1 Weight
(mm) (mm) (inch) (mm) (mm) (KG)
14799038 Adapter LP-00-1 1/2"-1 1/2" 66 12 1 1/2" 38 60 0.64
O-ring straigth adapter

01226165 O-ring 1" -3,53mm
01226185 O-ring 1 1/4"-3,53mm
01225650 O-ring 1 1/2"-3,53mm
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/3 DO-E LPADAP01 / 2014-10-2 / AK
44
HYVA ADAPTERS
Low Pressure
90° Hose Pillar BSPOT
14799284 Hose pillar LP20-90-1/2" 65 65 11 30 1/2" 13 27 30 40 0.34
14799322 Hose pillar LP20-90-1 1/4"-NYLON 70 71 16 25 1 1/4" 32 24 33 55 0.08
14799028 Hose pillar LP20-90-1 1/4" 70 75 11 25 1 1/4" 32 27 32 55 0.32
14799316 Hose pillar LP28-90-1"-NYLON 76 79 16 40 1" 23 38 44 50 0.10
14799020 Hose pillar LP28-90-1" 77 80 11 30 1" 23 38 44 50 0.63
14799025 Hose pillar LP28-90-1 1/4" 77 77 11 30 1 1/4" 32 38 44 55 0.70
14799050 Hose pillar LP28-90-1 1/2" 77 75 11 30 1 1/2" 32 38 44 60 0.69
14500625 Hose pillar LP32-90-1" 63 80 18 35 1" 26 43 50 41 0.50
14535327 Hose pillar LP32-90-1 1/4" 60 81 18 20 1 1/4" 19 30 50 38 1.70
90° Adapter BSPIT-BSPOT
(mm) (mm) (mm) (mm) (inch) (mm) (mm) (inch) (mm) (KG)
14799035 Adapter LP-90-1/2"-1/2" 66 62 11 20 1 1/2" 38 45 1 1/2" 60 0.71
O-ring 45° & 90° adapter

01226165 O-ring 1" -3,53mm
01226185 O-ring 1 1/4"-3,53mm
01225650 O-ring 1 1/2"-3,53mm
WWW.HYVA.COM
45
HYVA ADAPTERS
Low Pressure
45° Hose pillar BSPOT
14799043 Hose pillar LP32-45-1" 112 50 11 35 1" 23 41 50 50 0.36
14799044 Hose pillar LP32-45-1 1/4" 112 50 11 35 1 1/4" 33 41 50 50 0.40
Ball valve BSPIT-BSPOT
Part no. Description SW Weight

14780981 Ball valve 1 1/2"-1 1/2" 60 1.20
WWW.HYVA.COM
46
HYVA ADAPTERS
High Pressure
Straight adapter BSPOT
L1 L2 L3 D1 D2 D3 D4 Sw1 Weight
(mm) (mm) (mm) (inch) (mm) (mm) (mm) (mm) (KG)
01317690 Adapter HP-00-3/8"-3/8" 34 11 11 3/8" 9.5 9.5 3/8" 22 0,04
01317805 Adapter HP-00-3/8"-1/2" 38 12 14 3/8" 7.9 11 1/2" 27 0,07
01317700 Adapter HP-00-3/8"-3/4" 40 12 16 3/8" 7.9 16.5 3/4" 32 0,06
01317704 Adapter HP-00-1/2"-1/4" 35 13 14 1/4" 7 11 1/2" 27 0,06
01221838 Adapter HP-00-1/2"-1/2" 40 14 14 1/2" 11 11 1/2" 27 0,07
01317714 Adapter HP-00-1/2"-3/4" 42 14 16 1/2" 11 16.5 3/4" 32 0,10
01222105 Adapter HP-00-3/4"-1/4" 41 13 16 1/4" 7 16.5 3/4" 32 0,09
01222661 Adapter HP-00-3/4"-3/4" 44 16 16 3/4" 16.5 16.5 3/4" 32 0,12
14799080 Adapter HP-00-3/4"-1" 47 16 19 3/4" 16.5 22 1" 41 0,17
01317959 Adapter HP-00-3/4"-1 1/4" 48 16 20 3/4" 16.5 28.5 1 1/4" 50 0,28
01317933 Adapter HP-00-1"-1" 50 19 19 1" 22 22 1" 41 0,18
01222107 Adapter HP-00-1"-1 1/4" 51 19 20 1" 22 28.5 1 1/4" 50 0,28
14799093 Adapter HP-00-1 1/4"-1 1/4" 52 20 20 1 1/4" 28.5 28.5 1 1/4" 50 0,28
M- Thread BSP
Sw1
(mm) (mm) (mm) (inch) (mm) (mm) (mm) (mm) (KG)
01317920 Adapter HP-00-3/4"-M36 46 16 18 3/4" 17 25 M36 41 0.22
01317921 Adapter HP-00-1"-M36 49 19 18 1" 22 25 M36 41 0.22
01317922 Adapter HP-00-1-1/4"-M36 50 20 18 1-1/4" 29 25 M36 50 0.31
WWW.HYVA.COM
Subject to change without notice, no rights reserved Page 1/6 DO-E HPADAP01 / 2014-10-2 / AF
47
HYVA ADAPTERS
High Pressure
Straight adapter BSPOT-BSPIT
L1 L2 L3 D1 D2 D3 Sw1 Weight
(mm) (mm) (mm) (inch) (mm) (mm) (mm) (KG)
14958010 Adapter HP-00-1/2"-1/4" 24 14 - 1/2" 12 1/4" 27 0,06
14958000 Adapter HP-00-3/4"-3/8" 26 15 - 3/4" 15 3/8" 32 0,08
14958112 Adapter HP-00-3/4"-1/2" 26 15 - 3/4" 16 1/2" 32 0,15
14958095 Adapter HP-00-1"-1/4" 29 18 - 1" 11.5 1/4" 41 0,19
14958100 Adapter HP-00-1"-1/2" 29 18 - 1" 19 1/2" 41 0,15
14958102 Adapter HP-00-1"-3/4" 49 19 21 1" 30 3/4" 41 0,28
14958120 Adapter HP-00-1 1/4"-1" 52 20 24 1 1/4" 25 1" 50 0,45
Straight Swivel adapter BSPIT-BSPOT
L1 L2 D1 D2 D3 Sw1 Sw2 Weight

(mm) (mm) (inch) (mm) (inch) (mm) (mm) (KG)
01223648 Adapter HP-00-SW-1/2"-3/8" 46 11 1/2" 9.5 3/8" 27 22 0,10
01223650 Adapter HP-00-SW-3/4"-1/2" 49 15 3/4" 11 1/2" 32 27 0,15
01222909 Adapter HP-00-SW-3/4"-3/4" 51 17 3/4" 17 3/4" 32 32 0,17
01223660 Adapter HP-00-SW-3/4"-1" 54 17 3/4" 17 1" 32 41 0,25
01223675 Adapter HP-00-SW-1"-1/2" 60 18 1" 11 1/2" 41 27 0,20
01223677 Adapter HP-00-SW-1"-3/4" 53 18 1" 17 3/4" 41 32 0,22
14799108 Adapter HP-00-SW-1"-1" 56 19 1" 22 1" 41 41 0,26
WWW.HYVA.COM
48
HYVA ADAPTERS
High Pressure
Straight bulkhead adapter BSPOT-BSPOT
(mm) (mm) (mm) (inch) (mm) (mm) (inch) (mm) (KG)
14950180 Adapter HP-00-3/4"-3/4"-BH 65 16 38 3/4" 16 16 3/4" 32 0,18
01317946 Adapter HP-00-1"-1"-BH 84 19 53 1" 22 22 1" 41 0,35
14950182 Adapter HP-00-1 1/4"-1 1/4"-BH 74 20 40 1 1/4" 29 29 1 1/4" 52 0,47
Threaded bush BSPIT
L1 D1 D2 Weight
Part no. Description (mm) (mm) (inch) (KG)
09223010 Threaded bush HP-00-3/4"-L=37 37 32 3/4" 0,10
09223002 Threaded bush HP-00-1"-L=70 70 45 1" 0,40
09223003 Threaded bush HP-00-1"-L=25 25 45 1" 0,15
Bonded seal

01206801 Bonded seal 1/8"
01313848 Bonded seal 1"
01206874 Bonded seal 1 1/4"
01206898 Bonded seal 1 1/2"
WWW.HYVA.COM
49
HYVA ADAPTERS
High Pressure
90° Swivel adapter BSPIT-BSPOT
L1 L2 L3 D1 D2 D3 D4 Sw1 Sw2 Weight

(mm) (mm) (mm) (inch) (mm) (mm) (inch) (mm) (mm) (KG)
01317971 Adapter HP-90-SW-1/2"-1/2" 39 30.5 14 1/2" 10 11 1/2" 27 24 0,17
01317969 Adapter HP-90-SW-3/4"-3/4" 41 37 16 3/4" 15.5 17 3/4" 32 27 0,22
14799054 Adapter HP-90-SW-1"-3/4" 45 40 17 1" 21.5 17 3/4" 41 41 0,45
01317982 Adapter HP-90-SW-1"-1" 46.5 43 19 1" 20.5 22 1" 41 36 0,45
Elbow swivel adapter BSPIT-BSPOT
L1 L2 L3 D1 D2 D4 Sw1 Sw2 Weight

(mm) (mm) (mm) (inch) (mm) D3 (mm) (inch) (mm) (mm) (KG)
01317962 Adapter HP-90-SW-3/8"-3/8"-EL 35 58 13 3/8" 8 9 3/8" 22 22 0,09
01317970 Adapter HP-90-SW-1/2"-1/2"-EL 52 50 14 1/2" 10 11 1/2" 27 27 0,15
01317973 Adapter HP-90-SW-3/4"-3/4"-EL 57 65 16 3/4" 15.5 17 3/4" 32 32 0,24
01317974 Adapter HP-90-SW-1"-1"-EL 73 73 19 1" 20.5 22 1" 41 41 0,41
01317975 Adapter HP-90-SW-1 1/4"-1 1/4"-EL 81 76 20 1 1/4" 27.5 28.5 1 1/4" 50 50 0,55
L1 L2 L3 L4 D1 D2 D3 D4 Sw1 Sw2 Weight

(mm) (mm) (mm) (mm) (inch) (mm) (mm) (inch) (mm) (mm) (KG)
01317997 Adapter HP- 90 – SW ¾” BSPOTC – ¾” BSPOTF 20 40 50 16 3/4" 16 16 3/4" 32 27 0.31
01317998 Adapter HP- 90 – SW 1” BSPOTC – 1” BSPOTF 24 45 52 19 1" 21 21 1" 41 36 0.46
WWW.HYVA.COM
50
HYVA ADAPTERS
High Pressure
Sw2
Part no. Description L1 (mm) L2 L3 D1 D2 Sw1 (mm Weight
(mm) (mm) (inch) (mm) D3 (mm) D4 (inch) (mm) ) (KG)
01318410 Adapter HP-45-SW-3/4"-3/4" 39 32 16 3/4" 15.5 17 3/4" 32 27 0,11
01317815 Adapter HP-45-SW-1"-1" 42.5 35 19 1" 20.5 22 1" 41 36 0,38
T-piece BSPOT
L1 L2 L3 D1 D2 Sw1 Weight
(mm) (mm) (mm) (inch) (mm) (mm) (KG)
01318292 Adapter HP-T-3/8" (3x) 46 28 11 3/8" 8 17 0,07
01318295 Adapter HP-T-1/2" (3x) 68 34 14 1/2" 11 22 0,17
01318300 Adapter HP-T-3/4" (3x) 80 40 16 3/4" 16.5 27 0,24
01318310 Adapter HP-T-1" (3x) 84 42 19 1" 22 36 0,42
01318315 Adapter HP-T-1 1/4" (3x) 104 52 20 1 1/4" 28.5 50 0,55
T-piece BSPIT
L1 L2 D1 D2 Sw1 Sw2 Weight

(mm) (mm) (inch) (mm) (mm) (mm) (KG)
01318293 Adapter HP-T-SW-3/8" (3x) 66 33 3/8" 8 22 19 0,11
01318297 Adapter HP-T-SW-1/2" (3x) 80 40 1/2" 11 27 22 0,26
01318240 Adapter HP-T-SW-3/4" (3x) 80 40 3/4" 15.5 32 27 0,38
01318251 Adapter HP-T-SW-1" (3x) 100 45 1" 21.5 41 36 0,78
WWW.HYVA.COM
51
HYVA ADAPTERS
High Pressure
Plug BSPOT
L1 L2 L3 D1 Sw1 Allen Weight

(mm) (mm) (mm) (inch) (mm) (mm) (KG)
14799176 Adapter HP-00-1/4"-plug 10 10 - 1/4" - 7 0,01
14799175 Adapter HP-00-1/2"-plug 10 10 - 1/2" - 10 0,02
14799180 Adapter HP-00-1/2"-plug 18 13 8 1/2" - 10 0,04
01702838 Adapter HP-00-1/2"-plug 27 12 17 1/2" 27 - 0,06
01702841 Adapter HP-00-3/4"-plug 28 18 15 3/4" 32 - 0,12
01702853 Adapter HP-00-1"-plug 30 19 16 1" 41 - 0,18
14799190 Adapter HP-00-1"-plug 21 16 9 1" - 17 0,12
01702856 Adapter HP-00-1 1/4"-plug 32 20 17 1 1/4" 20 - 0,30
T-piece Swivel BSPIT-BSPOT
L1 L2 D1 D2 D3 Sw1 Sw2 Weight

(mm) (mm) (inch) (mm) (mm) (mm) (mm) (KG)
01318303 Adapter -HP-T-SW-3/4"-3/4"(2x) 88 40 BSPOT BSPIT BSPOT 32 27 0,34
01318305 Adapter -HP-T-SW-3/4"-3/4"(2x) 92 40 BSPOT BSPOT BSPIT 32 27 0,34
01318195 Adapter -HP-T-SW-1"-1"(2x) 90 48 BSPIT BSPOT BSPOT 41 36 0,59
01318253 Adapter -HP-T-SW-1"-1"(2x) 94 44 BSPOT BSPIT BSPOT 41 36 0,60
01318307 Adapter -HP-T-SW-1"(2x)-1" 98 40 BSPOT BSPIT BSPIT 41 36 0,60
Non-return valve BSPOT
L1 L2 L3 D1 D2 Sw1 Weight
(mm) (mm) (mm) (inch) (inch) (mm) (KG)
14739980 Non return valve 1"-3/4" 57.5 16.5 16 1" 3/4" 41 0,21
14739975A Non return valve 1" 51.5 19 16.5 1" 1" 41 0,25
WWW.HYVA.COM
52
Chassis Brackets
Front end cylinder chassis brackets Note : Please verify quoted dimensions with your
local Hyva subsidiary or agent prior to use
Chassis bracket for cylinder type: FC/FE 110/118/129/137/149
Cylinder type L3 (mm) L4 (mm) L5 (mm)

FC/FE 110 307 103 223
FC/FE 118 324 120 240
FC/FE 129 345 141 261
FC/FE 137 345 141 261
FC/FE 149 345 141 261
Bracket Type Part no. Bracket Mass (Kg) Part no. Replacement bush
Maintenance free 015 06 141 7.5 017 94 240
Greased version 015 06 146 7.7 017 94 020
Chassis bracket for cylinder type FC/FE 137/149

FC/FE 137 345 141 261
FC/FE 149 345 141 261
Greased version 015 06 136 11.2 017 94 020
Chassis bracket for cylinder type FC/FE 157/169/179/191

FC/FE 157 387 211 331
FC/FE 169 387 211 331
FC/FE 179 387 211 331
FC/FE 191 387 211 331
Greased version 015 06 136 11.2 017 94 020
Chassis bracket for cylinder type FC/FE 214

FC/FE 214 412 211 331
Greased version 015 06 133 11.0 017 94 025
General information Cylinder load Specifications

For all chassis brackets use: Note: Part no. Bracket Max. Cylinder Load (kN)
• Bolts M16x1.5 Property Class 8.8 or higher. • Brackets are painted black (RAL 9005 / gloss 25%).
• Self-locking nuts M16 Property Class 8 or higher.
015 06 131 / 141 235
• Weight can vary as per casting process.
• Washer 17x30 over slotted holes in the bracket. • Greased versions includes M8x1 grease nipple. 015 06 132 255
• For mounting, see instructions CYL-0030 or CYL-0031. 015 06 146 290
Bolts kits are available: • For bush replacement, see instruction BRA-0002. 015 06 133 / 136 440
• Q005: 16 bolts M16x50, nuts and washers for
chassis brackets (2.3 kg).
www.hyva.com
Subject to change without notice, no rights reserved Page 1/1 DO-E 015BRA10 / 2015 06 29 / RV AK
53
Chassis Brackets
Front end cylinder chassis brackets Note : Please verify quoted dimensions with your
Chassis bracket for cylinder type FC/FE 110 - 191
Cylinder Type L3 L4 L5
(mm) (mm) (mm)
110 328 240 288
118 345 257 305
129 366 278 326
137 366 278 326
149 366 278 326
157 410 322 370
169 410 322 370
179 410 322 370
191 410 322 370
Greased version 015 06 371 4.4 017 94 020
Chassis bracket for cylinder type FC/FE 110 - 191
Cylinder Type L3 (mm) L4 (mm)

110 284 244
118 301 261
129 322 282
137 322 282
149 322 282
157 366 326
169 366 326
179 366 326
191 366 326
Greased version 015 06 166 4.6 017 94 020
Chassis bracket for cylinder type FSE 110 - 191
Bracket Type Part no. Bracket Mass (Kg) Part no. Replacement axle kit
Welded chassis bracket 015 06 206 8.9 015 06 776
General information
For all chassis brackets use: Note:
• Bolts M16x1.5 Property Class 8.8 or higher.
•Brackets are painted black (RAL 9005 / gloss 25%).
• Self-locking nuts M16 Property Class 8 or higher.
•Weight can vary as per casting process.
•Greased versions includes M8x1 grease nipple.
•For mounting, see instructions CYL-0030, CYL-0031 or CYL-0033.
•For bush replacements, see instruction BRA-0002.
www.hyva.com
Subject to change without notice, no rights reserved Page 1/1 DO-E 015BRA11 / 11 02 2015 / RV AE
54
Lifting Brackets
Front end cylinder lifting brackets Note : Please verify quoted dimensions with your
Lifting bracket for cylinder type: FC 110/118/129
Cover A-dimension L1 (mm) L2 (mm)

168 201 305 237
219 340 444 376
241 340 444 376
242 340 444 376
Bracket Type Part no. Bracket Right Part no. Bracket Left Mass (Kg) Part no. Replacement bush
Maintenance free 015 09 120 015 09 121 7.7 017 94 230
Greased version 015 09 124 015 09 125 7.9 None
Lifting bracket for cylinder type: FC 118/129/137/149/157/169/179/191

219 340 462 410
241 340 462 410
242 340 462 410
Greased version 015 09 136 015 09 137 10.0 None
Lifting bracket for cylinder type: FC 191/214

241 340 490 386
242 340 490 386
273 360 510 410
Greased version 5629 800 122 5629 800 123 13.7 017 94 020
General information Cylinder load Specifications

For all lifting brackets use: Note: Part no. Bracket Max. Cylinder
• Bolts M16x1.5 Property Class 8.8 or higher. • Brackets are painted black (RAL 9005 / gloss 25%). Load (kN)
• Self-locking nuts M16 Property Class 8 or higher. • Weight can vary as per casting process.
015 06 120 190
• Washer 17x30 over slotted holes in the bracket. • Greased versions includes grease nipple.
• For mounting, see instructions CYL-0030. 015 06 130 / 015 06 728 235
Bolts kits are available: • For bush replacement, see instruction BRA-0002. 015 09 124 255
• Q006: 12 bolts M16x60, nuts and washers for 015 09 134 290
lifting brackets (2.0 kg). 5629 000 0123 440
• Q007: 12 bolts M16x70, nuts and washers for
lifting brackets (2.2 kg).
www.hyva.com
Subject to change without notice, no rights reserved Page 1/1 DO-E 015BRA12 / 11 02 2015 / RV AD
55
Top Brackets
Front end cylinder Top brackets Note : Please verify quoted dimensions with your
Top bracket for cylinder type FE/FEE/FSE with eye Ø 50 mm
Top bracket 015 06 777 11.0 015 06 776
Top bracket 015 06 782 13.4 015 06 781
Top bracket 015 06 778 6.7 015 06 776
General information
Note:
• The filler rings, pin and split pins are included.
• Brackets are painted black (RAL 9005 / gloss 25%).
• Weight can vary as per production process.
• For mounting, see instructions CYL-0031, CYL-0032 or CYL-0033.
www.hyva.com
Subject to change without notice, no rights reserved Page 1/1 DO-E 015BRA13 / 2015 01 19 / RV AF
56
MARKETS
ALPHA Series offers front end tipping solutions
for Construction, Transportation and Mining.
Tailored solutions
There is no single solution which can efciently serve the full range of applications in all market
segments. Extensive research and consultation with customers has been conducted to
optimise transport efciency, safety and reliability for the typical duty and conditions in
all market segments.
57
CONSTRUCTION
Solutions, with the standard operating pressure up to 250bar,
providing best all round performance through the combination of
reduced weight, increased tipping speed and the stability
required for the application.
Maximum performance and more payload from a smaller package.
TRANSPORTATION
Solutions designed to maximise payload in standard, silo and heavy
duty trailers. Weight saving derived from lightweight brackets and
from the new cylinders with lighter internal components.
The reduced weight of cover tubes on FC cylinders can achieve

savings of up to 40kg. ALPHA tractor kits are ideally suited to all the
latest Euro 6 truck chassis.
MINING
Solutions designed to perform at high speed in heavy duty conditions.
The solutions consist of high quality lters, heavy duty knock-off and
heavy duty brackets.
The heavy duty ALPHA Series cylinder has larger overlaps and the
stop and lift faces are redesigned to permit exceptionallyhigh tipping
and lowering increases up to 50%. For extra safety, the tipping valve
is now mounted directly onto the base of the tipping cylinder.

DEALER STAMP
PG-E ALPHA WET KIT CATALOGUE / 18-06-2015 / RV AA www.hyva.com

Catálogo Moderno Hyva PDF

Uploaded by

Copyright:

Available Formats

Catálogo Moderno Hyva PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catálogo Moderno Hyva PDF

Uploaded by

Copyright:

Available Formats

FRONT END TIPPING SOLUTIONS

ALPHA WET KIT CATALOGUE

TIPPING SOLUTIONS INFORMATION .........................................................................4

HYVA GEAR PUMP

HYVA TIPPING VALVES

HYVA AIR CONTROLS

ALPHA WET KIT CATALOGUE - 3

Development has focused on optimising transport efciency,

Operating Dry Wet

Tried and tested

Every design was laboratory tested to verify that performance

Solution for each

ALPHA WET KIT CATALOGUE - 5

3D model is available on request

Part Number 14016500 14016505 14016520 14016540 14016550

Support, straps & rubbers

Part No. Oil Tank

03 01 KIT full 14021010 1.8

04 Support rubbers 14020450 0.1

Air breather & return filters

3D model is available on request

Part Number 14016022 14016030 14016160

Support, straps & rubbers

Part No. Oil Tank

Air breather & return filters

Tank Tank Height

07 08 08 Return filter 150L/m 14780302 14780304

3D model is available on request

Part Number 14016515 14016525

Support, straps & rubbers

Part no. Tank

Air breather & return filters

SINGLE SUPPORT DOUBLE SUPPORT

3D model is available on request

Part numbers Steel 14017246* 14017254 14017258 14017262 14017266

All other holes are closed with temporary plastic plugs.

Supports, straps, rubbers & air breather

Mounting holes: Double support: Part No. Oil Tank

3 holes 01 Full kits 14020160 1 hole 22,5

No. Description Part no. Weight

No. Description Part no. Weight

SIDE MOUNTED VALVE

A Full kit option B 14021048

20 Worm Clamp 01238120 2 2

SINGLE SUPPORT DOUBLE SUPPORT

3D model is available on request

Part numbers Steel 14017248* 14017256 14017260 14017264 14017268

Supports, straps, rubbers & air breather

Mounting holes: Double support: Part No. Oil Tank

3 holes 01 Full kits 14020160 1 hole 22,5

No. Description Part no. Weight

14 For configuration, see Page 3

No. Description Part no. Weight

SIDE MOUNTED VALVE

Full kit option B 14021048

20 Worm Clamp 01238120 2 2

3D model is available on request

Specifications Spare parts

Pressure difference vs. flow